Close input streams for external devices immediately after probing
Input mix ports may have "max open count" set to "1" in the HAL
configuration, and this does not allow the APM to open multiple
input streams on them. This was not an issue in HIDL because
HIDL HALs did not enforce the stream count capping, it was
enforced on the APM side only.
Change 'checkInputForDevice' behavior so that it closes each
unused output immediately after opening and probing, instead
of opening many streams at once and then relying on
'checkCloseInputs' for closed unused ones.
Bug: 326211518
Test: atest audiopolicy_tests
Test: connect external device on Pixel, check for
"reaches the max open count" HAL error logs
Merged-In: I2a9159509ba3a14824ebc4281dddfb0c687219f6
Change-Id: I2a9159509ba3a14824ebc4281dddfb0c687219f6
diff --git a/services/audiopolicy/managerdefault/AudioPolicyManager.cpp b/services/audiopolicy/managerdefault/AudioPolicyManager.cpp
index ded939f..6a10469 100644
--- a/services/audiopolicy/managerdefault/AudioPolicyManager.cpp
+++ b/services/audiopolicy/managerdefault/AudioPolicyManager.cpp
@@ -390,8 +390,12 @@
// Before checking intputs, broadcast connect event to allow HAL to retrieve dynamic
// parameters on newly connected devices (instead of opening the inputs...)
broadcastDeviceConnectionState(device, media::DeviceConnectedState::CONNECTED);
+ // Propagate device availability to Engine
+ setEngineDeviceConnectionState(device, state);
if (checkInputsForDevice(device, state) != NO_ERROR) {
+ setEngineDeviceConnectionState(device, AUDIO_POLICY_DEVICE_STATE_UNAVAILABLE);
+
mAvailableInputDevices.remove(device);
broadcastDeviceConnectionState(device, media::DeviceConnectedState::DISCONNECTED);
@@ -425,6 +429,9 @@
// remove device from mReportedFormatsMap cache
mReportedFormatsMap.erase(device);
+
+ // Propagate device availability to Engine
+ setEngineDeviceConnectionState(device, state);
} break;
default:
@@ -432,9 +439,6 @@
return BAD_VALUE;
}
- // Propagate device availability to Engine
- setEngineDeviceConnectionState(device, state);
-
checkCloseInputs();
// As the input device list can impact the output device selection, update
// getDeviceForStrategy() cache
@@ -3175,6 +3179,23 @@
releaseInput(portId);
}
+bool AudioPolicyManager::checkCloseInput(const sp<AudioInputDescriptor>& input) {
+ if (input->clientsList().size() == 0
+ || !mAvailableInputDevices.containsAtLeastOne(input->supportedDevices())) {
+ return true;
+ }
+ for (const auto& client : input->clientsList()) {
+ sp<DeviceDescriptor> device =
+ mEngine->getInputDeviceForAttributes(client->attributes(), client->uid(),
+ client->session());
+ if (!input->supportedDevices().contains(device)) {
+ return true;
+ }
+ }
+ setInputDevice(input->mIoHandle, getNewInputDevice(input));
+ return false;
+}
+
void AudioPolicyManager::checkCloseInputs() {
// After connecting or disconnecting an input device, close input if:
// - it has no client (was just opened to check profile) OR
@@ -3183,29 +3204,10 @@
// devices anymore. Otherwise update device selection
std::vector<audio_io_handle_t> inputsToClose;
for (size_t i = 0; i < mInputs.size(); i++) {
- const sp<AudioInputDescriptor> input = mInputs.valueAt(i);
- if (input->clientsList().size() == 0
- || !mAvailableInputDevices.containsAtLeastOne(input->supportedDevices())) {
+ if (checkCloseInput(mInputs.valueAt(i))) {
inputsToClose.push_back(mInputs.keyAt(i));
- } else {
- bool close = false;
- for (const auto& client : input->clientsList()) {
- sp<DeviceDescriptor> device =
- mEngine->getInputDeviceForAttributes(client->attributes(), client->uid(),
- client->session());
- if (!input->supportedDevices().contains(device)) {
- close = true;
- break;
- }
- }
- if (close) {
- inputsToClose.push_back(mInputs.keyAt(i));
- } else {
- setInputDevice(input->mIoHandle, getNewInputDevice(input));
- }
}
}
-
for (const audio_io_handle_t handle : inputsToClose) {
ALOGV("%s closing input %d", __func__, handle);
closeInput(handle);
@@ -6610,14 +6612,14 @@
status_t AudioPolicyManager::checkInputsForDevice(const sp<DeviceDescriptor>& device,
audio_policy_dev_state_t state)
{
- sp<AudioInputDescriptor> desc;
-
if (audio_device_is_digital(device->type())) {
// erase all current sample rates, formats and channel masks
device->clearAudioProfiles();
}
if (state == AUDIO_POLICY_DEVICE_STATE_AVAILABLE) {
+ sp<AudioInputDescriptor> desc;
+
// first call getAudioPort to get the supported attributes from the HAL
struct audio_port_v7 port = {};
device->toAudioPort(&port);
@@ -6708,6 +6710,11 @@
device->importAudioPortAndPickAudioProfile(profile);
}
ALOGV("checkInputsForDevice(): adding input %d", input);
+
+ if (checkCloseInput(desc)) {
+ ALOGV("%s closing input %d", __func__, input);
+ closeInput(input);
+ }
}
} // end scan profiles
diff --git a/services/audiopolicy/managerdefault/AudioPolicyManager.h b/services/audiopolicy/managerdefault/AudioPolicyManager.h
index 61be09f..7513952 100644
--- a/services/audiopolicy/managerdefault/AudioPolicyManager.h
+++ b/services/audiopolicy/managerdefault/AudioPolicyManager.h
@@ -526,6 +526,7 @@
void addOutput(audio_io_handle_t output, const sp<SwAudioOutputDescriptor>& outputDesc);
void removeOutput(audio_io_handle_t output);
void addInput(audio_io_handle_t input, const sp<AudioInputDescriptor>& inputDesc);
+ bool checkCloseInput(const sp<AudioInputDescriptor>& input);
/**
* @brief setOutputDevices change the route of the specified output.
diff --git a/services/audiopolicy/tests/AudioPolicyManagerTestClient.h b/services/audiopolicy/tests/AudioPolicyManagerTestClient.h
index 7ef0266..072d9c0 100644
--- a/services/audiopolicy/tests/AudioPolicyManagerTestClient.h
+++ b/services/audiopolicy/tests/AudioPolicyManagerTestClient.h
@@ -70,6 +70,22 @@
return BAD_VALUE;
}
*input = mNextIoHandle++;
+ mOpenedInputs.insert(*input);
+ ALOGD("%s: opened input %d", __func__, *input);
+ return NO_ERROR;
+ }
+
+ status_t closeInput(audio_io_handle_t input) override {
+ if (mOpenedInputs.erase(input) != 1) {
+ if (input >= mNextIoHandle) {
+ ALOGE("%s: I/O handle %d has not been allocated yet (next is %d)",
+ __func__, input, mNextIoHandle);
+ } else {
+ ALOGE("%s: Attempt to close input %d twice", __func__, input);
+ }
+ return BAD_VALUE;
+ }
+ ALOGD("%s: closed input %d", __func__, input);
return NO_ERROR;
}
@@ -124,6 +140,8 @@
return &it->second;
};
+ size_t getOpenedInputsCount() const { return mOpenedInputs.size(); }
+
audio_module_handle_t peekNextModuleHandle() const { return mNextModuleHandle; }
void swapAllowedModuleNames(std::set<std::string>&& names = {}) {
@@ -241,6 +259,7 @@
std::vector<struct audio_port_v7> mDisconnectedDevicePorts;
std::set<audio_format_t> mSupportedFormats;
std::set<audio_channel_mask_t> mSupportedChannelMasks;
+ std::set<audio_io_handle_t> mOpenedInputs;
};
} // namespace android
diff --git a/services/audiopolicy/tests/AudioPolicyTestManager.h b/services/audiopolicy/tests/AudioPolicyTestManager.h
index aa7c9cd..34ceeab 100644
--- a/services/audiopolicy/tests/AudioPolicyTestManager.h
+++ b/services/audiopolicy/tests/AudioPolicyTestManager.h
@@ -34,6 +34,7 @@
using AudioPolicyManager::getInputs;
using AudioPolicyManager::getAvailableOutputDevices;
using AudioPolicyManager::getAvailableInputDevices;
+ using AudioPolicyManager::checkInputsForDevice;
using AudioPolicyManager::setSurroundFormatEnabled;
using AudioPolicyManager::releaseMsdOutputPatches;
using AudioPolicyManager::setMsdOutputPatches;
@@ -44,6 +45,7 @@
using AudioPolicyManager::deviceToAudioPort;
using AudioPolicyManager::handleDeviceConfigChange;
uint32_t getAudioPortGeneration() const { return mAudioPortGeneration; }
+ HwModuleCollection getHwModules() const { return mHwModules; }
};
} // namespace android
diff --git a/services/audiopolicy/tests/audiopolicymanager_tests.cpp b/services/audiopolicy/tests/audiopolicymanager_tests.cpp
index a2ee0f3..4d9d87c 100644
--- a/services/audiopolicy/tests/audiopolicymanager_tests.cpp
+++ b/services/audiopolicy/tests/audiopolicymanager_tests.cpp
@@ -1319,6 +1319,35 @@
"", "", AUDIO_FORMAT_DEFAULT));
}
+TEST_F(AudioPolicyManagerTestWithConfigurationFile, CheckInputsForDeviceClosesStreams) {
+ mClient->addSupportedFormat(AUDIO_FORMAT_PCM_16_BIT);
+ mClient->addSupportedFormat(AUDIO_FORMAT_PCM_24_BIT_PACKED);
+ mClient->addSupportedChannelMask(AUDIO_CHANNEL_IN_MONO);
+ mClient->addSupportedChannelMask(AUDIO_CHANNEL_IN_STEREO);
+ // Since 'checkInputsForDevice' is called as part of the 'setDeviceConnectionState',
+ // call it directly here, as we need to ensure that it does not keep all intermediate
+ // streams opened, as it may cause a rejection from the HAL based on the cap.
+ const size_t streamCountBefore = mClient->getOpenedInputsCount();
+ sp<DeviceDescriptor> device = mManager->getHwModules().getDeviceDescriptor(
+ AUDIO_DEVICE_IN_USB_DEVICE, "", "", AUDIO_FORMAT_DEFAULT, true /*allowToCreate*/);
+ ASSERT_NE(nullptr, device.get());
+ EXPECT_EQ(NO_ERROR,
+ mManager->checkInputsForDevice(device, AUDIO_POLICY_DEVICE_STATE_AVAILABLE));
+ EXPECT_EQ(streamCountBefore, mClient->getOpenedInputsCount());
+}
+
+TEST_F(AudioPolicyManagerTestWithConfigurationFile, SetDeviceConnectionStateClosesStreams) {
+ mClient->addSupportedFormat(AUDIO_FORMAT_PCM_16_BIT);
+ mClient->addSupportedFormat(AUDIO_FORMAT_PCM_24_BIT_PACKED);
+ mClient->addSupportedChannelMask(AUDIO_CHANNEL_IN_MONO);
+ mClient->addSupportedChannelMask(AUDIO_CHANNEL_IN_STEREO);
+ const size_t streamCountBefore = mClient->getOpenedInputsCount();
+ EXPECT_EQ(NO_ERROR, mManager->setDeviceConnectionState(AUDIO_DEVICE_IN_USB_DEVICE,
+ AUDIO_POLICY_DEVICE_STATE_AVAILABLE,
+ "", "", AUDIO_FORMAT_DEFAULT));
+ EXPECT_EQ(streamCountBefore, mClient->getOpenedInputsCount());
+}
+
class AudioPolicyManagerTestDynamicPolicy : public AudioPolicyManagerTestWithConfigurationFile {
protected:
void TearDown() override;
diff --git a/services/audiopolicy/tests/resources/test_audio_policy_configuration.xml b/services/audiopolicy/tests/resources/test_audio_policy_configuration.xml
index 1a299c6..bbc19fa 100644
--- a/services/audiopolicy/tests/resources/test_audio_policy_configuration.xml
+++ b/services/audiopolicy/tests/resources/test_audio_policy_configuration.xml
@@ -99,7 +99,7 @@
<route type="mix" sink="primary input"
sources="Built-In Mic,Hdmi-In Mic,USB Device In"/>
<route type="mix" sink="voip_tx"
- sources="Built-In Mic"/>
+ sources="Built-In Mic,USB Device In"/>
<route type="mix" sink="Hdmi"
sources="primary output"/>
<route type="mix" sink="BT SCO"