Cumulative patch from commit 8b48e3200680f71ae083b84793e6bdc2099416d2
8b48e32 wpa_cli: Add MAC address randomization in scan
fb37588 ctrl_iface: Add MAC address randomization in scan processing
56c76fa scan: Add MAC address randomization in scan handling
86056fe nl80211: Handle MAC address randomization in scan/sched_scan
ff23ed2 driver: Add definitions for MAC address randomization in scan
7db53bb wpa_cli: Implement TDLS start/cancel channel switching commands
72b2605 nl80211: Pass TDLS channel-switch start/stop params to kernel
6b90dea TDLS: Propagate enable/disable channel-switch commands to driver
d9d3b78 TDLS: Track TDLS channel switch prohibition in BSS
4daa572 TDLS: Add channel-switch capability flag
ca16586 Sync with wireless-testing.git include/uapi/linux/nl80211.h
8c42b36 WMM AC: Reconfigure tspecs on reassociation to the same BSS
677e7a9 WMM AC: Do not fail on unknown IEs in Association Response
fecc2bb WMM AC: Delete tspecs on roaming
20fe745 WMM AC: Print user-priority in wmm_ac_status
730a0d1 nl80211: Always register management frames handler
...
209702d Add possibility to set the setband parameter
ee82e33 Do not trigger the scan during initialization on Android platforms
e69ae5f Reject new SCAN commands if there is a pending request
...
59d7148 nl80211: Provide subtype and reason code for AP SME drivers
9d4ff04 Add external EAPOL transmission option for testing purposes
61fc904 P2P: Handle improper WPS termination on GO during group formation
58b40fd P2P: Clear p2p_go_group_formation_completed on GO start
c155305 Complete sme-connect radio work when clearing connection state
debb2da P2P: Report group removal reason PSK_FAILURE in timeout case
51465a0 The master branch is now used for v2.4 development
Change-Id: I9b9cfa5c5cd4d26b2f3f5595f7c226ac60de6258
diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index 6af7294..eeaba66 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -23,8 +23,7 @@
#include "utils/list.h"
#define HOSTAPD_CHAN_DISABLED 0x00000001
-#define HOSTAPD_CHAN_PASSIVE_SCAN 0x00000002
-#define HOSTAPD_CHAN_NO_IBSS 0x00000004
+#define HOSTAPD_CHAN_NO_IR 0x00000002
#define HOSTAPD_CHAN_RADAR 0x00000008
#define HOSTAPD_CHAN_HT40PLUS 0x00000010
#define HOSTAPD_CHAN_HT40MINUS 0x00000020
@@ -42,6 +41,12 @@
#define HOSTAPD_CHAN_VHT_50_30 0x00002000
#define HOSTAPD_CHAN_VHT_70_10 0x00004000
+#define HOSTAPD_CHAN_INDOOR_ONLY 0x00010000
+#define HOSTAPD_CHAN_GO_CONCURRENT 0x00020000
+
+/**
+ * enum reg_change_initiator - Regulatory change initiator
+ */
enum reg_change_initiator {
REGDOM_SET_BY_CORE,
REGDOM_SET_BY_USER,
@@ -50,6 +55,9 @@
REGDOM_BEACON_HINT,
};
+/**
+ * enum reg_type - Regulatory change types
+ */
enum reg_type {
REGDOM_TYPE_UNKNOWN,
REGDOM_TYPE_COUNTRY,
@@ -82,8 +90,8 @@
*/
u8 max_tx_power;
- /*
- * survey_list - Linked list of surveys
+ /**
+ * survey_list - Linked list of surveys (struct freq_survey)
*/
struct dl_list survey_list;
@@ -102,7 +110,9 @@
long double interference_factor;
#endif /* CONFIG_ACS */
- /* DFS CAC time in milliseconds */
+ /**
+ * dfs_cac_ms - DFS CAC time in milliseconds
+ */
unsigned int dfs_cac_ms;
};
@@ -170,10 +180,12 @@
#define IEEE80211_MODE_INFRA 0
#define IEEE80211_MODE_IBSS 1
#define IEEE80211_MODE_AP 2
+#define IEEE80211_MODE_MESH 5
#define IEEE80211_CAP_ESS 0x0001
#define IEEE80211_CAP_IBSS 0x0002
#define IEEE80211_CAP_PRIVACY 0x0010
+#define IEEE80211_CAP_RRM 0x1000
/* DMG (60 GHz) IEEE 802.11ad */
/* type - bits 0..1 */
@@ -213,6 +225,11 @@
* constructed of the IEs that are available. This field will also need to
* include SSID in IE format. All drivers are encouraged to be extended to
* report all IEs to make it easier to support future additions.
+ *
+ * This structure data is followed by ie_len octets of IEs from Probe Response
+ * frame (or if the driver does not indicate source of IEs, these may also be
+ * from Beacon frame). After the first set of IEs, another set of IEs may follow
+ * (with beacon_ie_len octets of data) if the driver provides both IE sets.
*/
struct wpa_scan_res {
unsigned int flags;
@@ -227,13 +244,7 @@
unsigned int age;
size_t ie_len;
size_t beacon_ie_len;
- /*
- * Followed by ie_len octets of IEs from Probe Response frame (or if
- * the driver does not indicate source of IEs, these may also be from
- * Beacon frame). After the first set of IEs, another set of IEs may
- * follow (with beacon_ie_len octets of data) if the driver provides
- * both IE sets.
- */
+ /* Followed by ie_len + beacon_ie_len octets of IE data */
};
/**
@@ -370,6 +381,27 @@
*/
unsigned int low_priority:1;
+ /**
+ * mac_addr_rand - Requests driver to randomize MAC address
+ */
+ unsigned int mac_addr_rand:1;
+
+ /**
+ * mac_addr - MAC address used with randomization. The address cannot be
+ * a multicast one, i.e., bit 0 of byte 0 should not be set.
+ */
+ const u8 *mac_addr;
+
+ /**
+ * mac_addr_mask - MAC address mask used with randomization.
+ *
+ * Bits that are 0 in the mask should be randomized. Bits that are 1 in
+ * the mask should be taken as is from mac_addr. The mask should not
+ * allow the generation of a multicast address, i.e., bit 0 of byte 0
+ * must be set.
+ */
+ const u8 *mac_addr_mask;
+
/*
* NOTE: Whenever adding new parameters here, please make sure
* wpa_scan_clone_params() and wpa_scan_free_params() get updated with
@@ -399,34 +431,95 @@
*/
int p2p;
+ /**
+ * sae_data - SAE elements for Authentication frame
+ *
+ * This buffer starts with the Authentication transaction sequence
+ * number field. If SAE is not used, this pointer is %NULL.
+ */
const u8 *sae_data;
+
+ /**
+ * sae_data_len - Length of sae_data buffer in octets
+ */
size_t sae_data_len;
-
};
+/**
+ * enum wps_mode - WPS mode
+ */
enum wps_mode {
- WPS_MODE_NONE /* no WPS provisioning being used */,
- WPS_MODE_OPEN /* WPS provisioning with AP that is in open mode */,
- WPS_MODE_PRIVACY /* WPS provisioning with AP that is using protection
- */
+ /**
+ * WPS_MODE_NONE - No WPS provisioning being used
+ */
+ WPS_MODE_NONE,
+
+ /**
+ * WPS_MODE_OPEN - WPS provisioning with AP that is in open mode
+ */
+ WPS_MODE_OPEN,
+
+ /**
+ * WPS_MODE_PRIVACY - WPS provisioning with AP that is using protection
+ */
+ WPS_MODE_PRIVACY
};
+/**
+ * struct hostapd_freq_params - Channel parameters
+ */
struct hostapd_freq_params {
- int mode;
- int freq;
- int channel;
- /* for HT */
- int ht_enabled;
- int sec_channel_offset; /* 0 = HT40 disabled, -1 = HT40 enabled,
- * secondary channel below primary, 1 = HT40
- * enabled, secondary channel above primary */
+ /**
+ * mode - Mode/band (HOSTAPD_MODE_IEEE80211A, ..)
+ */
+ enum hostapd_hw_mode mode;
- /* for VHT */
+ /**
+ * freq - Primary channel center frequency in MHz
+ */
+ int freq;
+
+ /**
+ * channel - Channel number
+ */
+ int channel;
+
+ /**
+ * ht_enabled - Whether HT is enabled
+ */
+ int ht_enabled;
+
+ /**
+ * sec_channel_offset - Secondary channel offset for HT40
+ *
+ * 0 = HT40 disabled,
+ * -1 = HT40 enabled, secondary channel below primary,
+ * 1 = HT40 enabled, secondary channel above primary
+ */
+ int sec_channel_offset;
+
+ /**
+ * vht_enabled - Whether VHT is enabled
+ */
int vht_enabled;
- /* valid for both HT and VHT, center_freq2 is non-zero
- * only for bandwidth 80 and an 80+80 channel */
- int center_freq1, center_freq2;
+ /**
+ * center_freq1 - Segment 0 center frequency in MHz
+ *
+ * Valid for both HT and VHT.
+ */
+ int center_freq1;
+
+ /**
+ * center_freq2 - Segment 1 center frequency in MHz
+ *
+ * Non-zero only for bandwidth 80 and an 80+80 channel
+ */
+ int center_freq2;
+
+ /**
+ * bandwidth - Channel bandwidth in MHz (20, 40, 80, 160)
+ */
int bandwidth;
};
@@ -680,12 +773,21 @@
int disable_ht;
/**
- * HT Capabilities over-rides. Only bits set in the mask will be used,
- * and not all values are used by the kernel anyway. Currently, MCS,
- * MPDU and MSDU fields are used.
+ * htcaps - HT Capabilities over-rides
+ *
+ * Only bits set in the mask will be used, and not all values are used
+ * by the kernel anyway. Currently, MCS, MPDU and MSDU fields are used.
+ *
+ * Pointer to struct ieee80211_ht_capabilities.
*/
- const u8 *htcaps; /* struct ieee80211_ht_capabilities * */
- const u8 *htcaps_mask; /* struct ieee80211_ht_capabilities * */
+ const u8 *htcaps;
+
+ /**
+ * htcaps_mask - HT Capabilities over-rides mask
+ *
+ * Pointer to struct ieee80211_ht_capabilities.
+ */
+ const u8 *htcaps_mask;
#ifdef CONFIG_VHT_OVERRIDES
/**
@@ -699,6 +801,20 @@
const struct ieee80211_vht_capabilities *vhtcaps;
const struct ieee80211_vht_capabilities *vhtcaps_mask;
#endif /* CONFIG_VHT_OVERRIDES */
+
+ /**
+ * req_key_mgmt_offload - Request key management offload for connection
+ *
+ * Request key management offload for this connection if the device
+ * supports it.
+ */
+ int req_key_mgmt_offload;
+
+ /**
+ * Flag for indicating whether this association includes support for
+ * RRM (Radio Resource Measurements)
+ */
+ int rrm_used;
};
enum hide_ssid {
@@ -895,6 +1011,14 @@
int ap_max_inactivity;
/**
+ * smps_mode - SMPS mode
+ *
+ * SMPS mode to be used by the AP, specified as the relevant bits of
+ * ht_capab (i.e. HT_CAP_INFO_SMPS_*).
+ */
+ unsigned int smps_mode;
+
+ /**
* disable_dgaf - Whether group-addressed frames are disabled
*/
int disable_dgaf;
@@ -910,6 +1034,33 @@
struct hostapd_freq_params *freq;
};
+struct wpa_driver_mesh_bss_params {
+#define WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS 0x00000001
+ /*
+ * TODO: Other mesh configuration parameters would go here.
+ * See NL80211_MESHCONF_* for all the mesh config parameters.
+ */
+ unsigned int flags;
+};
+
+struct wpa_driver_mesh_join_params {
+ const u8 *meshid;
+ int meshid_len;
+ const int *basic_rates;
+ const u8 *ies;
+ int ie_len;
+ int freq;
+ int beacon_int;
+ int max_peer_links;
+ enum ht_mode ht_mode;
+ struct wpa_driver_mesh_bss_params conf;
+#define WPA_DRIVER_MESH_FLAG_USER_MPM 0x00000001
+#define WPA_DRIVER_MESH_FLAG_DRIVER_MPM 0x00000002
+#define WPA_DRIVER_MESH_FLAG_SAE_AUTH 0x00000004
+#define WPA_DRIVER_MESH_FLAG_AMPE 0x00000008
+ unsigned int flags;
+};
+
/**
* struct wpa_driver_capa - Driver capability information
*/
@@ -922,6 +1073,7 @@
#define WPA_DRIVER_CAPA_KEY_MGMT_FT 0x00000020
#define WPA_DRIVER_CAPA_KEY_MGMT_FT_PSK 0x00000040
#define WPA_DRIVER_CAPA_KEY_MGMT_WAPI_PSK 0x00000080
+ /** Bitfield of supported key management suites */
unsigned int key_mgmt;
#define WPA_DRIVER_CAPA_ENC_WEP40 0x00000001
@@ -937,94 +1089,121 @@
#define WPA_DRIVER_CAPA_ENC_BIP_GMAC_256 0x00000400
#define WPA_DRIVER_CAPA_ENC_BIP_CMAC_256 0x00000800
#define WPA_DRIVER_CAPA_ENC_GTK_NOT_USED 0x00001000
+ /** Bitfield of supported cipher suites */
unsigned int enc;
#define WPA_DRIVER_AUTH_OPEN 0x00000001
#define WPA_DRIVER_AUTH_SHARED 0x00000002
#define WPA_DRIVER_AUTH_LEAP 0x00000004
+ /** Bitfield of supported IEEE 802.11 authentication algorithms */
unsigned int auth;
-/* Driver generated WPA/RSN IE */
+/** Driver generated WPA/RSN IE */
#define WPA_DRIVER_FLAGS_DRIVER_IE 0x00000001
-/* Driver needs static WEP key setup after association command */
+/** Driver needs static WEP key setup after association command */
#define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC 0x00000002
-/* Driver takes care of all DFS operations */
+/** Driver takes care of all DFS operations */
#define WPA_DRIVER_FLAGS_DFS_OFFLOAD 0x00000004
-/* Driver takes care of RSN 4-way handshake internally; PMK is configured with
+/** Driver takes care of RSN 4-way handshake internally; PMK is configured with
* struct wpa_driver_ops::set_key using alg = WPA_ALG_PMK */
#define WPA_DRIVER_FLAGS_4WAY_HANDSHAKE 0x00000008
+/** Driver is for a wired Ethernet interface */
#define WPA_DRIVER_FLAGS_WIRED 0x00000010
-/* Driver provides separate commands for authentication and association (SME in
+/** Driver provides separate commands for authentication and association (SME in
* wpa_supplicant). */
#define WPA_DRIVER_FLAGS_SME 0x00000020
-/* Driver supports AP mode */
+/** Driver supports AP mode */
#define WPA_DRIVER_FLAGS_AP 0x00000040
-/* Driver needs static WEP key setup after association has been completed */
+/** Driver needs static WEP key setup after association has been completed */
#define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC_DONE 0x00000080
-/* Driver supports dynamic HT 20/40 MHz channel changes during BSS lifetime */
+/** Driver supports dynamic HT 20/40 MHz channel changes during BSS lifetime */
#define WPA_DRIVER_FLAGS_HT_2040_COEX 0x00000100
-/* Driver supports concurrent P2P operations */
+/** Driver supports concurrent P2P operations */
#define WPA_DRIVER_FLAGS_P2P_CONCURRENT 0x00000200
-/*
+/**
* Driver uses the initial interface as a dedicated management interface, i.e.,
* it cannot be used for P2P group operations or non-P2P purposes.
*/
#define WPA_DRIVER_FLAGS_P2P_DEDICATED_INTERFACE 0x00000400
-/* This interface is P2P capable (P2P GO or P2P Client) */
+/** This interface is P2P capable (P2P GO or P2P Client) */
#define WPA_DRIVER_FLAGS_P2P_CAPABLE 0x00000800
-/* Driver supports station and key removal when stopping an AP */
+/** Driver supports station and key removal when stopping an AP */
#define WPA_DRIVER_FLAGS_AP_TEARDOWN_SUPPORT 0x00001000
-/*
+/**
* Driver uses the initial interface for P2P management interface and non-P2P
* purposes (e.g., connect to infra AP), but this interface cannot be used for
* P2P group operations.
*/
#define WPA_DRIVER_FLAGS_P2P_MGMT_AND_NON_P2P 0x00002000
-/*
+/**
* Driver is known to use sane error codes, i.e., when it indicates that
* something (e.g., association) fails, there was indeed a failure and the
* operation does not end up getting completed successfully later.
*/
#define WPA_DRIVER_FLAGS_SANE_ERROR_CODES 0x00004000
-/* Driver supports off-channel TX */
+/** Driver supports off-channel TX */
#define WPA_DRIVER_FLAGS_OFFCHANNEL_TX 0x00008000
-/* Driver indicates TX status events for EAPOL Data frames */
+/** Driver indicates TX status events for EAPOL Data frames */
#define WPA_DRIVER_FLAGS_EAPOL_TX_STATUS 0x00010000
-/* Driver indicates TX status events for Deauth/Disassoc frames */
+/** Driver indicates TX status events for Deauth/Disassoc frames */
#define WPA_DRIVER_FLAGS_DEAUTH_TX_STATUS 0x00020000
-/* Driver supports roaming (BSS selection) in firmware */
+/** Driver supports roaming (BSS selection) in firmware */
#define WPA_DRIVER_FLAGS_BSS_SELECTION 0x00040000
-/* Driver supports operating as a TDLS peer */
+/** Driver supports operating as a TDLS peer */
#define WPA_DRIVER_FLAGS_TDLS_SUPPORT 0x00080000
-/* Driver requires external TDLS setup/teardown/discovery */
+/** Driver requires external TDLS setup/teardown/discovery */
#define WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP 0x00100000
-/* Driver indicates support for Probe Response offloading in AP mode */
+/** Driver indicates support for Probe Response offloading in AP mode */
#define WPA_DRIVER_FLAGS_PROBE_RESP_OFFLOAD 0x00200000
-/* Driver supports U-APSD in AP mode */
+/** Driver supports U-APSD in AP mode */
#define WPA_DRIVER_FLAGS_AP_UAPSD 0x00400000
-/* Driver supports inactivity timer in AP mode */
+/** Driver supports inactivity timer in AP mode */
#define WPA_DRIVER_FLAGS_INACTIVITY_TIMER 0x00800000
-/* Driver expects user space implementation of MLME in AP mode */
+/** Driver expects user space implementation of MLME in AP mode */
#define WPA_DRIVER_FLAGS_AP_MLME 0x01000000
-/* Driver supports SAE with user space SME */
+/** Driver supports SAE with user space SME */
#define WPA_DRIVER_FLAGS_SAE 0x02000000
-/* Driver makes use of OBSS scan mechanism in wpa_supplicant */
+/** Driver makes use of OBSS scan mechanism in wpa_supplicant */
#define WPA_DRIVER_FLAGS_OBSS_SCAN 0x04000000
-/* Driver supports IBSS (Ad-hoc) mode */
+/** Driver supports IBSS (Ad-hoc) mode */
#define WPA_DRIVER_FLAGS_IBSS 0x08000000
-/* Driver supports radar detection */
+/** Driver supports radar detection */
#define WPA_DRIVER_FLAGS_RADAR 0x10000000
-/* Driver supports a dedicated interface for P2P Device */
+/** Driver supports a dedicated interface for P2P Device */
#define WPA_DRIVER_FLAGS_DEDICATED_P2P_DEVICE 0x20000000
-/* Driver supports QoS Mapping */
+/** Driver supports QoS Mapping */
#define WPA_DRIVER_FLAGS_QOS_MAPPING 0x40000000
-/* Driver supports CSA in AP mode */
+/** Driver supports CSA in AP mode */
#define WPA_DRIVER_FLAGS_AP_CSA 0x80000000
- unsigned int flags;
+/** Driver supports mesh */
+#define WPA_DRIVER_FLAGS_MESH 0x0000000100000000ULL
+/** Driver support ACS offload */
+#define WPA_DRIVER_FLAGS_ACS_OFFLOAD 0x0000000200000000ULL
+/** Driver supports key management offload */
+#define WPA_DRIVER_FLAGS_KEY_MGMT_OFFLOAD 0x0000000400000000ULL
+/** Driver supports TDLS channel switching */
+#define WPA_DRIVER_FLAGS_TDLS_CHANNEL_SWITCH 0x0000000800000000ULL
+ u64 flags;
+#define WPA_DRIVER_SMPS_MODE_STATIC 0x00000001
+#define WPA_DRIVER_SMPS_MODE_DYNAMIC 0x00000002
+ unsigned int smps_modes;
+
+ unsigned int wmm_ac_supported:1;
+
+ unsigned int mac_addr_rand_scan_supported:1;
+ unsigned int mac_addr_rand_sched_scan_supported:1;
+
+ /** Maximum number of supported active probe SSIDs */
int max_scan_ssids;
+
+ /** Maximum number of supported active probe SSIDs for sched_scan */
int max_sched_scan_ssids;
+
+ /** Whether sched_scan (offloaded scanning) is supported */
int sched_scan_supported;
+
+ /** Maximum number of supported match sets for sched_scan */
int max_match_sets;
/**
@@ -1042,13 +1221,13 @@
* probe_resp_offloads - Bitmap of supported protocols by the driver
* for Probe Response offloading.
*/
-/* Driver Probe Response offloading support for WPS ver. 1 */
+/** Driver Probe Response offloading support for WPS ver. 1 */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS 0x00000001
-/* Driver Probe Response offloading support for WPS ver. 2 */
+/** Driver Probe Response offloading support for WPS ver. 2 */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS2 0x00000002
-/* Driver Probe Response offloading support for P2P */
+/** Driver Probe Response offloading support for P2P */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_P2P 0x00000004
-/* Driver Probe Response offloading support for IEEE 802.11u (Interworking) */
+/** Driver Probe Response offloading support for IEEE 802.11u (Interworking) */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_INTERWORKING 0x00000008
unsigned int probe_resp_offloads;
@@ -1069,6 +1248,24 @@
unsigned int extended_capa_len;
struct wowlan_triggers wowlan_triggers;
+
+/** Driver adds the DS Params Set IE in Probe Request frames */
+#define WPA_DRIVER_FLAGS_DS_PARAM_SET_IE_IN_PROBES 0x00000001
+/** Driver adds the WFA TPC IE in Probe Request frames */
+#define WPA_DRIVER_FLAGS_WFA_TPC_IE_IN_PROBES 0x00000002
+/** Driver handles quiet period requests */
+#define WPA_DRIVER_FLAGS_QUIET 0x00000004
+/**
+ * Driver is capable of inserting the current TX power value into the body of
+ * transmitted frames.
+ * Background: Some Action frames include a TPC Report IE. This IE contains a
+ * TX power field, which has to be updated by lower layers. One such Action
+ * frame is Link Measurement Report (part of RRM). Another is TPC Report (part
+ * of spectrum management). Note that this insertion takes place at a fixed
+ * offset, namely the 6th byte in the Action frame body.
+ */
+#define WPA_DRIVER_FLAGS_TX_POWER_INSERTION 0x00000008
+ u32 rrm_flags;
};
@@ -1098,6 +1295,10 @@
int vht_opmode_enabled;
u8 vht_opmode;
u32 flags; /* bitmask of WPA_STA_* flags */
+ u32 flags_mask; /* unset bits in flags */
+#ifdef CONFIG_MESH
+ enum mesh_plink_state plink_state;
+#endif /* CONFIG_MESH */
int set; /* Set STA parameters instead of add */
u8 qosinfo;
const u8 *ext_capab;
@@ -1159,16 +1360,19 @@
* WPA_IF_P2P_DEVICE - P2P Device interface is used to indentify the
* abstracted P2P Device function in the driver
*/
- WPA_IF_P2P_DEVICE
+ WPA_IF_P2P_DEVICE,
+
+ /*
+ * WPA_IF_MESH - Mesh interface
+ */
+ WPA_IF_MESH,
};
struct wpa_init_params {
void *global_priv;
const u8 *bssid;
const char *ifname;
- const u8 *ssid;
- size_t ssid_len;
- const char *test_socket;
+ const char *driver_params;
int use_pae_group_addr;
char **bridge;
size_t num_bridge;
@@ -1197,6 +1401,7 @@
#define WPA_STA_SHORT_PREAMBLE BIT(2)
#define WPA_STA_MFP BIT(3)
#define WPA_STA_TDLS_PEER BIT(4)
+#define WPA_STA_AUTHENTICATED BIT(5)
enum tdls_oper {
TDLS_DISCOVERY_REQ,
@@ -1311,6 +1516,23 @@
TDLS_PEER_WMM = BIT(2),
};
+/* valid info in the wmm_params struct */
+enum wmm_params_valid_info {
+ WMM_PARAMS_UAPSD_QUEUES_INFO = BIT(0),
+};
+
+/**
+ * struct wmm_params - WMM parameterss configured for this association
+ * @info_bitmap: Bitmap of valid wmm_params info; indicates what fields
+ * of the struct contain valid information.
+ * @uapsd_queues: Bitmap of ACs configured for uapsd (valid only if
+ * %WMM_PARAMS_UAPSD_QUEUES_INFO is set)
+ */
+struct wmm_params {
+ u8 info_bitmap;
+ u8 uapsd_queues;
+};
+
#ifdef CONFIG_MACSEC
struct macsec_init_params {
Boolean always_include_sci;
@@ -1319,6 +1541,26 @@
};
#endif /* CONFIG_MACSEC */
+enum drv_br_port_attr {
+ DRV_BR_PORT_ATTR_PROXYARP,
+ DRV_BR_PORT_ATTR_HAIRPIN_MODE,
+};
+
+enum drv_br_net_param {
+ DRV_BR_NET_PARAM_GARP_ACCEPT,
+};
+
+struct drv_acs_params {
+ /* Selected mode (HOSTAPD_MODE_*) */
+ enum hostapd_hw_mode hw_mode;
+
+ /* Indicates whether HT is enabled */
+ int ht_enabled;
+
+ /* Indicates whether HT40 is enabled */
+ int ht40_enabled;
+};
+
/**
* struct wpa_driver_ops - Driver interface API definition
@@ -1605,27 +1847,6 @@
const u8 * (*get_mac_addr)(void *priv);
/**
- * send_eapol - Optional function for sending EAPOL packets
- * @priv: private driver interface data
- * @dest: Destination MAC address
- * @proto: Ethertype
- * @data: EAPOL packet starting with IEEE 802.1X header
- * @data_len: Size of the EAPOL packet
- *
- * Returns: 0 on success, -1 on failure
- *
- * This optional function can be used to override l2_packet operations
- * with driver specific functionality. If this function pointer is set,
- * l2_packet module is not used at all and the driver interface code is
- * responsible for receiving and sending all EAPOL packets. The
- * received EAPOL packets are sent to core code with EVENT_EAPOL_RX
- * event. The driver interface is required to implement get_mac_addr()
- * handler if send_eapol() is used.
- */
- int (*send_eapol)(void *priv, const u8 *dest, u16 proto,
- const u8 *data, size_t data_len);
-
- /**
* set_operstate - Sets device operating state to DORMANT or UP
* @priv: private driver interface data
* @state: 0 = dormant, 1 = up
@@ -1700,22 +1921,6 @@
size_t ies_len);
/**
- * send_ft_action - Send FT Action frame (IEEE 802.11r)
- * @priv: Private driver interface data
- * @action: Action field value
- * @target_ap: Target AP address
- * @ies: FT IEs (MDIE, FTIE, ...) (FT Request action frame body)
- * @ies_len: Length of FT IEs in bytes
- * Returns: 0 on success, -1 on failure
- *
- * The supplicant uses this callback to request the driver to transmit
- * an FT Action frame (action category 6) for over-the-DS fast BSS
- * transition.
- */
- int (*send_ft_action)(void *priv, u8 action, const u8 *target_ap,
- const u8 *ies, size_t ies_len);
-
- /**
* get_scan_results2 - Fetch the latest scan results
* @priv: private driver interface data
*
@@ -2547,6 +2752,45 @@
u8 qos_map_set_len);
/**
+ * br_add_ip_neigh - Add a neigh to the bridge ip neigh table
+ * @priv: Private driver interface data
+ * @version: IP version of the IP address, 4 or 6
+ * @ipaddr: IP address for the neigh entry
+ * @prefixlen: IP address prefix length
+ * @addr: Corresponding MAC address
+ * Returns: 0 on success, negative (<0) on failure
+ */
+ int (*br_add_ip_neigh)(void *priv, u8 version, const u8 *ipaddr,
+ int prefixlen, const u8 *addr);
+
+ /**
+ * br_delete_ip_neigh - Remove a neigh from the bridge ip neigh table
+ * @priv: Private driver interface data
+ * @version: IP version of the IP address, 4 or 6
+ * @ipaddr: IP address for the neigh entry
+ * Returns: 0 on success, negative (<0) on failure
+ */
+ int (*br_delete_ip_neigh)(void *priv, u8 version, const u8 *ipaddr);
+
+ /**
+ * br_port_set_attr - Set a bridge port attribute
+ * @attr: Bridge port attribute to set
+ * @val: Value to be set
+ * Returns: 0 on success, negative (<0) on failure
+ */
+ int (*br_port_set_attr)(void *priv, enum drv_br_port_attr attr,
+ unsigned int val);
+
+ /**
+ * br_port_set_attr - Set a bridge network parameter
+ * @param: Bridge parameter to set
+ * @val: Value to be set
+ * Returns: 0 on success, negative (<0) on failure
+ */
+ int (*br_set_net_param)(void *priv, enum drv_br_net_param param,
+ unsigned int val);
+
+ /**
* set_wowlan - Set wake-on-wireless triggers
* @priv: Private driver interface data
* @triggers: wowlan triggers
@@ -2751,6 +2995,55 @@
int (*switch_channel)(void *priv, struct csa_settings *settings);
/**
+ * add_tx_ts - Add traffic stream
+ * @priv: Private driver interface data
+ * @tsid: Traffic stream ID
+ * @addr: Receiver address
+ * @user_prio: User priority of the traffic stream
+ * @admitted_time: Admitted time for this TS in units of
+ * 32 microsecond periods (per second).
+ * Returns: 0 on success, -1 on failure
+ */
+ int (*add_tx_ts)(void *priv, u8 tsid, const u8 *addr, u8 user_prio,
+ u16 admitted_time);
+
+ /**
+ * del_tx_ts - Delete traffic stream
+ * @priv: Private driver interface data
+ * @tsid: Traffic stream ID
+ * @addr: Receiver address
+ * Returns: 0 on success, -1 on failure
+ */
+ int (*del_tx_ts)(void *priv, u8 tsid, const u8 *addr);
+
+ /**
+ * Enable channel-switching with TDLS peer
+ * @priv: Private driver interface data
+ * @addr: MAC address of the TDLS peer
+ * @oper_class: Operating class of the switch channel
+ * @params: Channel specification
+ * Returns: 0 on success, -1 on failure
+ *
+ * The function indicates to driver that it can start switching to a
+ * different channel with a specified TDLS peer. The switching is
+ * assumed on until canceled with tdls_disable_channel_switch().
+ */
+ int (*tdls_enable_channel_switch)(
+ void *priv, const u8 *addr, u8 oper_class,
+ const struct hostapd_freq_params *params);
+
+ /**
+ * Disable channel switching with TDLS peer
+ * @priv: Private driver interface data
+ * @addr: MAC address of the TDLS peer
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function indicates to the driver that it should stop switching
+ * with a given TDLS peer.
+ */
+ int (*tdls_disable_channel_switch)(void *priv, const u8 *addr);
+
+ /**
* start_dfs_cac - Listen for radar interference on the channel
* @priv: Private driver interface data
* @freq: Channel parameters
@@ -3023,6 +3316,40 @@
*/
int (*disable_transmit_sa)(void *priv, u32 channel, u8 an);
#endif /* CONFIG_MACSEC */
+
+ /**
+ * init_mesh - Driver specific initialization for mesh
+ * @priv: Private driver interface data
+ * Returns: 0 on success, -1 on failure
+ */
+ int (*init_mesh)(void *priv);
+
+ /**
+ * join_mesh - Join a mesh network
+ * @priv: Private driver interface data
+ * @params: Mesh configuration parameters
+ * Returns: 0 on success, -1 on failure
+ */
+ int (*join_mesh)(void *priv,
+ struct wpa_driver_mesh_join_params *params);
+
+ /**
+ * leave_mesh - Leave a mesh network
+ * @priv: Private driver interface data
+ * Returns 0 on success, -1 on failure
+ */
+ int (*leave_mesh)(void *priv);
+
+ /**
+ * do_acs - Automatically select channel
+ * @priv: Private driver interface data
+ * @params: Parameters for ACS
+ * Returns 0 on success, -1 on failure
+ *
+ * This command can be used to offload ACS to the driver if the driver
+ * indicates support for such offloading (WPA_DRIVER_FLAGS_ACS_OFFLOAD).
+ */
+ int (*do_acs)(void *priv, struct drv_acs_params *params);
};
@@ -3211,11 +3538,6 @@
EVENT_ASSOC_TIMED_OUT,
/**
- * EVENT_FT_RRB_RX - FT (IEEE 802.11r) RRB frame received
- */
- EVENT_FT_RRB_RX,
-
- /**
* EVENT_WPS_BUTTON_PUSHED - Report hardware push button press for WPS
*/
EVENT_WPS_BUTTON_PUSHED,
@@ -3255,13 +3577,6 @@
EVENT_CANCEL_REMAIN_ON_CHANNEL,
/**
- * EVENT_MLME_RX - Report reception of frame for MLME (test use only)
- *
- * This event is used only by driver_test.c and userspace MLME.
- */
- EVENT_MLME_RX,
-
- /**
* EVENT_RX_PROBE_REQ - Indicate received Probe Request frame
*
* This event is used to indicate when a Probe Request frame has been
@@ -3289,9 +3604,7 @@
* EVENT_EAPOL_RX - Report received EAPOL frame
*
* When in AP mode with hostapd, this event is required to be used to
- * deliver the receive EAPOL frames from the driver. With
- * %wpa_supplicant, this event is used only if the send_eapol() handler
- * is used to override the use of l2_packet for EAPOL frame TX.
+ * deliver the receive EAPOL frames from the driver.
*/
EVENT_EAPOL_RX,
@@ -3498,7 +3811,20 @@
* to reduce issues due to interference or internal co-existence
* information in the driver.
*/
- EVENT_AVOID_FREQUENCIES
+ EVENT_AVOID_FREQUENCIES,
+
+ /**
+ * EVENT_NEW_PEER_CANDIDATE - new (unknown) mesh peer notification
+ */
+ EVENT_NEW_PEER_CANDIDATE,
+
+ /**
+ * EVENT_ACS_CHANNEL_SELECTED - Received selected channels by ACS
+ *
+ * Indicates a pair of primary and secondary channels chosen by ACS
+ * in device.
+ */
+ EVENT_ACS_CHANNEL_SELECTED,
};
@@ -3618,9 +3944,62 @@
unsigned int freq;
/**
+ * wmm_params - WMM parameters used in this association.
+ */
+ struct wmm_params wmm_params;
+
+ /**
* addr - Station address (for AP mode)
*/
const u8 *addr;
+
+ /**
+ * The following is the key management offload information
+ * @authorized
+ * @key_replay_ctr
+ * @key_replay_ctr_len
+ * @ptk_kck
+ * @ptk_kek_len
+ * @ptk_kek
+ * @ptk_kek_len
+ */
+
+ /**
+ * authorized - Status of key management offload,
+ * 1 = successful
+ */
+ int authorized;
+
+ /**
+ * key_replay_ctr - Key replay counter value last used
+ * in a valid EAPOL-Key frame
+ */
+ const u8 *key_replay_ctr;
+
+ /**
+ * key_replay_ctr_len - The length of key_replay_ctr
+ */
+ size_t key_replay_ctr_len;
+
+ /**
+ * ptk_kck - The derived PTK KCK
+ */
+ const u8 *ptk_kck;
+
+ /**
+ * ptk_kek_len - The length of ptk_kck
+ */
+ size_t ptk_kck_len;
+
+ /**
+ * ptk_kek - The derived PTK KEK
+ */
+ const u8 *ptk_kek;
+
+ /**
+ * ptk_kek_len - The length of ptk_kek
+ */
+ size_t ptk_kek_len;
} assoc_info;
/**
@@ -3830,15 +4209,6 @@
} timeout_event;
/**
- * struct ft_rrb_rx - Data for EVENT_FT_RRB_RX events
- */
- struct ft_rrb_rx {
- const u8 *src;
- const u8 *data;
- size_t data_len;
- } ft_rrb_rx;
-
- /**
* struct tx_status - Data for EVENT_TX_STATUS events
*/
struct tx_status {
@@ -3922,17 +4292,6 @@
} scan_info;
/**
- * struct mlme_rx - Data for EVENT_MLME_RX events
- */
- struct mlme_rx {
- const u8 *buf;
- size_t len;
- int freq;
- int channel;
- int ssi;
- } mlme_rx;
-
- /**
* struct rx_probe_req - Data for EVENT_RX_PROBE_REQ events
*/
struct rx_probe_req {
@@ -4112,7 +4471,7 @@
* survey_results - Survey result data for EVENT_SURVEY
* @freq_filter: Requested frequency survey filter, 0 if request
* was for all survey data
- * @survey_list: Linked list of survey data
+ * @survey_list: Linked list of survey data (struct freq_survey)
*/
struct survey_results {
unsigned int freq_filter;
@@ -4137,6 +4496,31 @@
* This is used as the data with EVENT_AVOID_FREQUENCIES.
*/
struct wpa_freq_range_list freq_range;
+
+ /**
+ * struct mesh_peer
+ *
+ * @peer: Peer address
+ * @ies: Beacon IEs
+ * @ie_len: Length of @ies
+ *
+ * Notification of new candidate mesh peer.
+ */
+ struct mesh_peer {
+ const u8 *peer;
+ const u8 *ies;
+ size_t ie_len;
+ } mesh_peer;
+
+ /**
+ * struct acs_selected_channels - Data for EVENT_ACS_CHANNEL_SELECTED
+ * @pri_channel: Selected primary channel
+ * @sec_channel: Selected secondary channel
+ */
+ struct acs_selected_channels {
+ u8 pri_channel;
+ u8 sec_channel;
+ } acs_selected_channels;
};
/**
@@ -4198,6 +4582,13 @@
/* Convert chan_width to a string for logging and control interfaces */
const char * channel_width_to_string(enum chan_width width);
+int ht_supported(const struct hostapd_hw_modes *mode);
+int vht_supported(const struct hostapd_hw_modes *mode);
+
+struct wowlan_triggers *
+wpa_get_wowlan_triggers(const char *wowlan_triggers,
+ const struct wpa_driver_capa *capa);
+
/* NULL terminated array of linked in driver wrappers */
extern struct wpa_driver_ops *wpa_drivers[];