Cumulative patch from commit 128f6a98b3d4d6ed103db759707309f451db9682
128f6a98b mka: Fix the order of operations in secure channel deletion
213eb1885 dbus: Set mode to mesh in bss properties when mesh is supported
21fda4ee7 RSN: Fix pre-authentication EAPOL-Start startPeriod configuration
3f23260da nl80211: Notify reason for connection timeout failure
ca1ab9db2 hostapd: Get vendor HE capabilities
7785c70bb QCA vendor command for fetching HE capabilities
d512f406f hostapd: Add IEEE 802.11ax HE IEs into Beacon/Probe Response frames
94380cb40 hostapd: Initial IEEE 802.11ax (HE) definitions
5972dc73c mesh: Use correct rate in VHT and HT mixed environment
84ea61cff mesh: Use correct rate in HT and legacy mixed environment
025c6a47f VHT: Remove a redundant check
a7a638c2c hw_features: Move VHT capabilities checks to common
e01cf2afc Define eapol_sm_get_eap_proxy_imsi() only with CONFIG_EAP_PROXY=y
a8e25deeb FT: Merge similar error paths to use common steps
c6c41f6ea FT: Support addition of RIC elements into Reassociation Request frame
ecbdc1a1f Mark RSN msg 1/2 key data debug dump as key material
834c5d681 FILS: Fix PMK length for initial connection with FILS SHA384 AKM
e491389eb FILS: Fix ifdef for PTK derivation with SHA384-based AKM
62944f7d2 Add HMAC-SHA384 with internal crypto
aeecd4eae OpenSSL: Fix hmac_sha384_vector() implementation
5db32adc9 browser-wpadebug: Send HTTP response with HTTP/1.1 header
79329ae0a P2P: Verify local driver preferred frequencies for P2P use cases
3a7819f0a P2P: Add P2P_SET override_pref_op_chan to allow overriding preference
c06fca04f Add wpa_supplicant SET get_pref_freq_list_override
b4d56efb1 Use throughput estimate-based BSS selection with larger SNR difference
142041487 Drop GREAT_SNR definition from 30 to 25 dB
364c064a4 FT: Check key derivation results explicitly in AP operations
b5562a1a6 FILS: Remove CRC32 dependency from build
5cf0930f9 testS: Additional BSS TM error case coverage
885bbd4de WNM: Remove unused code from BSS TM Req generation
e7ddd86a9 WNM: Use a common error path in ieee802_11_send_wnmsleep_resp()
d6d5970e2 WNM: Fix WNM-Sleep Mode Request parsing for WNM-Sleep element
8492cc79c PeerKey: Remove dead code related to STSL negotiation state
e37c0aa5d OSU server: Remove invalid options from documentation
0d6056703 WMM: Fix estimated medium time calculation for some corner cases
ae26d3021 Fix "IEEE 802.11: Ignored Action frame" debug message
4ead4c7ec WMM: Remove obsolete TODO comments
577e794eb Sync android.config with wpa_supplicant defconfig changes
784710b7f Add bgscan options to wpa_supplicant defconfig
212a8f487 Fix wpa_supplicant defconfig copy-paste description
57c3a605c Add support to sched scan to report relatively better BSSs
20c846d9e nl80211: sched_scan relative RSSI parameters
37e9f511e mka: Send MKPDUs forever if mode is PSK
76aa31838 EAP: Call deinit_for_reauth() for Phase 2 EAP methods
02156b98b EAP-AKA: Don't use anonymous identity in phase2
9e2afe10e EAP-SIM: Don't use anonymous identity in phase2
ed9b1c16d EAP peer: Cache decrypted requests for EAP-SIM/AKA/AKA'
5f11880f6 SME: Remove null ie param from CTRL-EVENT-AUTH-REJECT
4d70b2a4e RRM: Fix a memory leak in beacon request handling
401243b73 RRM: Fix range request overriding
fb81c0a3d RRM: Merge similar error returns to a single one
13b30052d RRM: Fix Range Request max age parsing
bd6ec7f7c Fix MAC ACL query freeing on deinit
b4fd1f0ed Allow PNO scan also in connection completed state
4c6f450ca Add radio_work_is_connect() helper
85b6b6b6e Serialize scan/p2p-scan if already scheduled on the same interface
fcb303a57 P2P: Clear driver scan cache after BSS_FLUSH
0d6dc6830 FILS: Clean up HLP resize check
1d9d21f37 GAS: Add support to randomize transmitter address
8331c9b31 nl80211: Add support for mgmt_tx with random TA
14fa723a9 Sync with mac80211-next.git include/uapi/linux/nl80211.h
65ab7eb1f GAS: Fix OSU Providers List response with invalid configuration
f3e157057 VHT: Fill VHT capability with hardware capability
4bb9b674c Add a log message when GTK rekeying failed
41f140d38 Add hostapd options wpa_group_update_count and wpa_pairwise_update_count
e54691106 mka: Some bug fixes for MACsec in PSK mode
7faf403f9 mka: Fix an incorrect update of participant->to_use_sak
00e0f0b01 hs20-osu-client: Hide a trivial compiler warning
276e93654 hw_features: Clean center freq for falling back HT40 channels
f47f93617 P2P: Override P2P_PEER group_capab with 0 if no matching BSS entry found
bcf66493c Fix estimated throughput based skip-roam case
84bb12aa6 FILS: Fix send_assoc_resp() HLP extension to cover sta == NULL
275cc9428 FILS: Stop processing if fils_rmsk_to_pmk() fails
caab23f19 Set EAPOL-Key Key Length field to 0 for group message 1/2 in RSN
b0fb2be77 Do not send GNonce in EAPOL-Key group message 1/2
3bbc47050 Fix EAPOL-Key Install bit in Group Key 1/2 with FT and FILS auth
db5e53cb0 mesh: Fix struct hostapd_data initialization
9b170991a mesh: Fix mesh interface removal fix
945604a35 Update wpaspy.py to be python3 compatible
4d6e79f86 Use defines in hostapd_set_freq_params()
0217b8d87 eloop: Fix comments mismatch eloop_event/timeout_handler definitions
09a97eb27 Update the copyright notice years for QCA vendor definitions
841e9a8c7 QCA vendor command to set the trace levels for the specific QCA module
d77f33041 FILS: Fix AES-SIV AAD for (Re)Association Request frame decryption
7a6c3de23 ERP: Use macro for EMSKname length instead of hardcoded integer value
bb3ea71a2 ERP: Fix rIK derivation
124ddfa19 FILS: Parse and report received FILS HLP Containers from response
91d91abf6 FILS: DHCP relay for HLP requests
54b04d6f3 FILS: Move HLP request handling into a separate file
5a9d50493 ProxyARP: Use more robust DHCP option parsing
e64c13feb Move DHCP definitions into a common file
70407ee5c Add QCA vendor definitions for BSS transition status
53d171440 AP: Check ACL upon association request for 802.11ad
4cc61c386 GAS: Set temporary session timeout bigger than gas_comeback_delay
Test: Wifi Suite
Change-Id: Id597d7cba5d2b3875f2dbbeb9a10fd5e69a6a7c2
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/wpa_supplicant/android.config b/wpa_supplicant/android.config
index f320667..1679347 100644
--- a/wpa_supplicant/android.config
+++ b/wpa_supplicant/android.config
@@ -1,9 +1,9 @@
# Example wpa_supplicant build time configuration
#
# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
+# wpa_supplicant binary. All lines starting with # are ignored. Configuration
+# option lines must be commented out complete, if they are not to be included,
+# i.e., just setting VARIABLE=n is not disabling that variable.
#
# This file is included in Makefile, so variables like CFLAGS and LIBS can also
# be modified from here. In most cases, these lines should use += in order not
@@ -91,10 +91,9 @@
CONFIG_EAP_TTLS=y
# EAP-FAST
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
-# to add the needed functions.
+# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
+# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
+# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
#CONFIG_EAP_FAST=y
# EAP-GTC
@@ -152,6 +151,9 @@
# EAP-IKEv2
#CONFIG_EAP_IKEV2=y
+# EAP-EKE
+#CONFIG_EAP_EKE=y
+
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
@@ -176,8 +178,10 @@
# Select control interface backend for external programs, e.g, wpa_cli:
# unix = UNIX domain sockets (default for Linux/*BSD)
# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
# named_pipe = Windows Named Pipe (default for Windows)
# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
# y = use default (backwards compatibility)
# If this option is commented out, control interface is not included in the
# build.
@@ -254,6 +258,9 @@
# Should we use epoll instead of select? Select is used by default.
#CONFIG_ELOOP_EPOLL=y
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
# Select layer 2 packet implementation
# linux = Linux packet socket (default)
# pcap = libpcap/libdnet/WinPcap
@@ -263,6 +270,12 @@
# none = Empty template
CONFIG_L2_PACKET=linux
+# Disable Linux packet socket workaround applicable for station interface
+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
+# is known to not have the regression issue in packet socket behavior with
+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
+#CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
+
# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
CONFIG_PEERKEY=y
@@ -349,9 +362,13 @@
# amount of memory/flash.
#CONFIG_DYNAMIC_EAP_METHODS=y
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
CONFIG_IEEE80211R=y
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for AP mode (implies
+# CONFIG_IEEE80211R).
+#CONFIG_IEEE80211R_AP=y
+
# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
#CONFIG_DEBUG_FILE=y
@@ -429,6 +446,10 @@
# IEEE 802.11n (High Throughput) support (mainly for AP mode)
CONFIG_IEEE80211N=y
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
# Wireless Network Management (IEEE Std 802.11v-2011)
# Note: This is experimental and not complete implementation.
CONFIG_WNM=y
@@ -442,6 +463,9 @@
# Hotspot 2.0
CONFIG_HS20=y
+# Enable interface matching in wpa_supplicant
+#CONFIG_MATCH_IFACE=y
+
# Disable roaming in wpa_supplicant
CONFIG_NO_ROAMING=y
@@ -489,9 +513,32 @@
# Support Multi Band Operation
#CONFIG_MBO=y
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+# Note: This is an experimental and not yet complete implementation. This
+# should not be enabled for production use.
+#CONFIG_FILS=y
+
+# Support RSN on IBSS networks
+# This is needed to be able to use mode=1 network profile with proto=RSN and
+# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
+#CONFIG_IBSS_RSN=y
+
# External PMKSA cache control
# This can be used to enable control interface commands that allow the current
# PMKSA cache entries to be fetched and new entries to be added.
#CONFIG_PMKSA_CACHE_EXTERNAL=y
+# Mesh Networking (IEEE 802.11s)
+#CONFIG_MESH=y
+
+# Background scanning modules
+# These can be used to request wpa_supplicant to perform background scanning
+# operations for roaming within an ESS (same SSID). See the bgscan parameter in
+# the wpa_supplicant.conf file for more details.
+# Periodic background scans based on signal strength
+#CONFIG_BGSCAN_SIMPLE=y
+# Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+#CONFIG_BGSCAN_LEARN=y
+
include $(wildcard $(LOCAL_PATH)/android_config_*.inc)