diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index 92688a3..7b3a6bd 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -136,6 +136,29 @@
 	unsigned int dfs_cac_ms;
 };
 
+#define HE_MAX_NUM_SS 		8
+#define HE_MAX_PHY_CAPAB_SIZE	3
+
+/**
+ * struct he_ppe_threshold - IEEE 802.11ax HE PPE Threshold
+ */
+struct he_ppe_threshold {
+	u32 numss_m1;
+	u32 ru_count;
+	u32 ppet16_ppet8_ru3_ru0[HE_MAX_NUM_SS];
+};
+
+/**
+ * struct he_capabilities - IEEE 802.11ax HE capabilities
+ */
+struct he_capabilities {
+	u8 he_supported;
+	u32 phy_cap[HE_MAX_PHY_CAPAB_SIZE];
+	u32 mac_cap;
+	u32 mcs;
+	struct he_ppe_threshold ppet;
+};
+
 #define HOSTAPD_MODE_FLAG_HT_INFO_KNOWN BIT(0)
 #define HOSTAPD_MODE_FLAG_VHT_INFO_KNOWN BIT(1)
 
@@ -194,6 +217,11 @@
 	u8 vht_mcs_set[8];
 
 	unsigned int flags; /* HOSTAPD_MODE_FLAG_* */
+
+	/**
+	 * he_capab - HE (IEEE 802.11ax) capabilities
+	 */
+	struct he_capabilities he_capab;
 };
 
 
@@ -495,6 +523,36 @@
 	  */
 	 unsigned int duration_mandatory:1;
 
+	/**
+	 * relative_rssi_set - Whether relative RSSI parameters are set
+	 */
+	unsigned int relative_rssi_set:1;
+
+	/**
+	 * relative_rssi - Relative RSSI for reporting better BSSs
+	 *
+	 * Amount of RSSI by which a BSS should be better than the current
+	 * connected BSS to report the new BSS to user space.
+	 */
+	s8 relative_rssi;
+
+	/**
+	 * relative_adjust_band - Band to which RSSI should be adjusted
+	 *
+	 * The relative_adjust_rssi should be added to the band specified
+	 * by relative_adjust_band.
+	 */
+	enum set_band relative_adjust_band;
+
+	/**
+	 * relative_adjust_rssi - RSSI to be added to relative_adjust_band
+	 *
+	 * An amount of relative_band_rssi should be added to the BSSs that
+	 * belong to the band specified by relative_adjust_band while comparing
+	 * with other bands for BSS reporting.
+	 */
+	s8 relative_adjust_rssi;
+
 	/*
 	 * NOTE: Whenever adding new parameters here, please make sure
 	 * wpa_scan_clone_params() and wpa_scan_free_params() get updated with
@@ -1393,6 +1451,14 @@
 #define WPA_DRIVER_FLAGS_BEACON_RATE_HT		0x0000100000000000ULL
 /** Driver supports Beacon frame TX rate configuration (VHT rates) */
 #define WPA_DRIVER_FLAGS_BEACON_RATE_VHT	0x0000200000000000ULL
+/** Driver supports mgmt_tx with random TX address in non-connected state */
+#define WPA_DRIVER_FLAGS_MGMT_TX_RANDOM_TA	0x0000400000000000ULL
+/** Driver supports mgmt_tx with random TX addr in connected state */
+#define WPA_DRIVER_FLAGS_MGMT_TX_RANDOM_TA_CONNECTED	0x0000800000000000ULL
+/** Driver supports better BSS reporting with sched_scan in connected mode */
+#define WPA_DRIVER_FLAGS_SCHED_SCAN_RELATIVE_RSSI	0x0001000000000000ULL
+/** Driver supports HE capabilities */
+#define WPA_DRIVER_FLAGS_HE_CAPABILITIES	0x0002000000000000ULL
 	u64 flags;
 
 #define FULL_AP_CLIENT_STATE_SUPP(drv_flags) \
@@ -2785,6 +2851,9 @@
 	 * transmitted on that channel; alternatively the frame may be sent on
 	 * the current operational channel (if in associated state in station
 	 * mode or while operating as an AP.)
+	 *
+	 * If @src differs from the device MAC address, use of a random
+	 * transmitter address is requested for this message exchange.
 	 */
 	int (*send_action)(void *priv, unsigned int freq, unsigned int wait,
 			   const u8 *dst, const u8 *src, const u8 *bssid,
@@ -4638,6 +4707,11 @@
 		 * than explicit rejection response from the AP.
 		 */
 		int timed_out;
+
+		/**
+		 * timeout_reason - Reason for the timeout
+		 */
+		const char *timeout_reason;
 	} assoc_reject;
 
 	struct timeout_event {
diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index 27e22c6..e9107b3 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -6881,6 +6881,14 @@
 	os_memcpy(hdr->addr2, src, ETH_ALEN);
 	os_memcpy(hdr->addr3, bssid, ETH_ALEN);
 
+	if (os_memcmp(bss->addr, src, ETH_ALEN) != 0) {
+		wpa_printf(MSG_DEBUG, "nl80211: Use random TA " MACSTR,
+			   MAC2STR(src));
+		os_memcpy(bss->rand_addr, src, ETH_ALEN);
+	} else {
+		os_memset(bss->rand_addr, 0, ETH_ALEN);
+	}
+
 	if (is_ap_interface(drv->nlmode) &&
 	    (!(drv->capa.flags & WPA_DRIVER_FLAGS_OFFCHANNEL_TX) ||
 	     (int) freq == bss->freq || drv->device_ap_sme ||
diff --git a/src/drivers/driver_nl80211.h b/src/drivers/driver_nl80211.h
index 94b8bdf..bdc79c5 100644
--- a/src/drivers/driver_nl80211.h
+++ b/src/drivers/driver_nl80211.h
@@ -78,6 +78,7 @@
 
 	struct nl80211_wiphy_data *wiphy_data;
 	struct dl_list wiphy_list;
+	u8 rand_addr[ETH_ALEN];
 };
 
 struct wpa_driver_nl80211_data {
@@ -160,6 +161,7 @@
 	unsigned int scan_vendor_cmd_avail:1;
 	unsigned int connect_reassoc:1;
 	unsigned int set_wifi_conf_vendor_cmd_avail:1;
+	unsigned int he_capab_vendor_cmd_avail:1;
 
 	u64 vendor_scan_cookie;
 	u64 remain_on_chan_cookie;
@@ -208,6 +210,8 @@
 	 * (NL80211_CMD_VENDOR). 0 if no pending scan request.
 	 */
 	int last_scan_cmd;
+
+	struct he_capabilities he_capab;
 };
 
 struct nl_msg;
diff --git a/src/drivers/driver_nl80211_capa.c b/src/drivers/driver_nl80211_capa.c
index 3d85316..7064ce1 100644
--- a/src/drivers/driver_nl80211_capa.c
+++ b/src/drivers/driver_nl80211_capa.c
@@ -389,6 +389,15 @@
 	    ext_feature_isset(ext_features, len,
 			      NL80211_EXT_FEATURE_SET_SCAN_DWELL))
 		capa->rrm_flags |= WPA_DRIVER_FLAGS_SUPPORT_BEACON_REPORT;
+	if (ext_feature_isset(ext_features, len,
+			      NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA))
+		capa->flags |= WPA_DRIVER_FLAGS_MGMT_TX_RANDOM_TA;
+	if (ext_feature_isset(ext_features, len,
+			      NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED))
+		capa->flags |= WPA_DRIVER_FLAGS_MGMT_TX_RANDOM_TA_CONNECTED;
+	if (ext_feature_isset(ext_features, len,
+			      NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI))
+		capa->flags |= WPA_DRIVER_FLAGS_SCHED_SCAN_RELATIVE_RSSI;
 }
 
 
@@ -735,6 +744,9 @@
 				case QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION:
 					drv->set_wifi_conf_vendor_cmd_avail = 1;
 					break;
+				case QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES:
+					drv->he_capab_vendor_cmd_avail = 1;
+					break;
 #endif /* CONFIG_DRIVER_NL80211_QCA */
 				}
 			}
@@ -904,6 +916,100 @@
 }
 
 
+static int qca_nl80211_he_capab_handler(struct nl_msg *msg, void *arg)
+{
+	struct nlattr *tb[NL80211_ATTR_MAX + 1];
+	struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg));
+	struct he_capabilities *he_capab = arg;
+	struct nlattr *nl_vend;
+	struct nlattr *tb_vendor[QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_MAX + 1];
+	size_t len;
+
+	nla_parse(tb, NL80211_ATTR_MAX, genlmsg_attrdata(gnlh, 0),
+		  genlmsg_attrlen(gnlh, 0), NULL);
+
+	if (!tb[NL80211_ATTR_VENDOR_DATA])
+		return NL_SKIP;
+
+	nl_vend = tb[NL80211_ATTR_VENDOR_DATA];
+	nla_parse(tb_vendor, QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_MAX,
+		  nla_data(nl_vend), nla_len(nl_vend), NULL);
+
+	if (tb_vendor[QCA_WLAN_VENDOR_ATTR_HE_SUPPORTED]) {
+		u8 he_supported;
+
+		he_supported = nla_get_u8(
+			tb_vendor[QCA_WLAN_VENDOR_ATTR_HE_SUPPORTED]);
+		wpa_printf(MSG_DEBUG, "nl80211: HE capabilities supported: %u",
+			   he_supported);
+		he_capab->he_supported = he_supported;
+		if (!he_supported)
+			return NL_SKIP;
+	}
+
+	if (tb_vendor[QCA_WLAN_VENDOR_ATTR_PHY_CAPAB]) {
+		len = nla_len(tb_vendor[QCA_WLAN_VENDOR_ATTR_PHY_CAPAB]);
+
+		if (len > sizeof(he_capab->phy_cap))
+			len = sizeof(he_capab->phy_cap);
+		os_memcpy(he_capab->phy_cap,
+			  nla_data(tb_vendor[QCA_WLAN_VENDOR_ATTR_PHY_CAPAB]),
+			  len);
+	}
+
+	if (tb_vendor[QCA_WLAN_VENDOR_ATTR_MAC_CAPAB])
+		he_capab->mac_cap =
+			nla_get_u32(tb_vendor[QCA_WLAN_VENDOR_ATTR_MAC_CAPAB]);
+
+	if (tb_vendor[QCA_WLAN_VENDOR_ATTR_HE_MCS])
+		he_capab->mcs =
+			nla_get_u32(tb_vendor[QCA_WLAN_VENDOR_ATTR_HE_MCS]);
+
+	if (tb_vendor[QCA_WLAN_VENDOR_ATTR_NUM_SS])
+		he_capab->ppet.numss_m1 =
+			nla_get_u32(tb_vendor[QCA_WLAN_VENDOR_ATTR_NUM_SS]);
+
+	if (tb_vendor[QCA_WLAN_VENDOR_ATTR_RU_IDX_MASK])
+		he_capab->ppet.ru_count =
+			nla_get_u32(tb_vendor[QCA_WLAN_VENDOR_ATTR_RU_IDX_MASK]);
+
+	if (tb_vendor[QCA_WLAN_VENDOR_ATTR_PPE_THRESHOLD]) {
+		len = nla_len(tb_vendor[QCA_WLAN_VENDOR_ATTR_PPE_THRESHOLD]);
+
+		if (len > sizeof(he_capab->ppet.ppet16_ppet8_ru3_ru0))
+			len = sizeof(he_capab->ppet.ppet16_ppet8_ru3_ru0);
+		os_memcpy(he_capab->ppet.ppet16_ppet8_ru3_ru0,
+			  nla_data(tb_vendor[QCA_WLAN_VENDOR_ATTR_PPE_THRESHOLD]),
+			  len);
+	}
+
+	return NL_SKIP;
+}
+
+
+static void qca_nl80211_check_he_capab(struct wpa_driver_nl80211_data *drv)
+{
+	struct nl_msg *msg;
+	int ret;
+
+	if (!drv->he_capab_vendor_cmd_avail)
+		return;
+
+	if (!(msg = nl80211_drv_msg(drv, 0, NL80211_CMD_VENDOR)) ||
+		nla_put_u32(msg, NL80211_ATTR_VENDOR_ID, OUI_QCA) ||
+		nla_put_u32(msg, NL80211_ATTR_VENDOR_SUBCMD,
+			    QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES)) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	ret = send_and_recv_msgs(drv, msg, qca_nl80211_he_capab_handler,
+				 &drv->he_capab);
+	if (!ret && drv->he_capab.he_supported)
+		drv->capa.flags |= WPA_DRIVER_FLAGS_HE_CAPABILITIES;
+}
+
+
 struct features_info {
 	u8 *flags;
 	size_t flags_len;
@@ -1075,6 +1181,7 @@
 #ifdef CONFIG_DRIVER_NL80211_QCA
 	qca_nl80211_check_dfs_capa(drv);
 	qca_nl80211_get_features(drv);
+	qca_nl80211_check_he_capab(drv);
 
 	/*
 	 * To enable offchannel simultaneous support in wpa_supplicant, the
diff --git a/src/drivers/driver_nl80211_event.c b/src/drivers/driver_nl80211_event.c
index c18fc22..ed2cbe4 100644
--- a/src/drivers/driver_nl80211_event.c
+++ b/src/drivers/driver_nl80211_event.c
@@ -279,6 +279,7 @@
 			       struct nlattr *addr, struct nlattr *req_ie,
 			       struct nlattr *resp_ie,
 			       struct nlattr *timed_out,
+			       struct nlattr *timeout_reason,
 			       struct nlattr *authorized,
 			       struct nlattr *key_replay_ctr,
 			       struct nlattr *ptk_kck,
@@ -338,6 +339,24 @@
 		}
 		event.assoc_reject.status_code = status_code;
 		event.assoc_reject.timed_out = timed_out != NULL;
+		if (timed_out && timeout_reason) {
+			enum nl80211_timeout_reason reason;
+
+			reason = nla_get_u32(timeout_reason);
+			switch (reason) {
+			case NL80211_TIMEOUT_SCAN:
+				event.assoc_reject.timeout_reason = "scan";
+				break;
+			case NL80211_TIMEOUT_AUTH:
+				event.assoc_reject.timeout_reason = "auth";
+				break;
+			case NL80211_TIMEOUT_ASSOC:
+				event.assoc_reject.timeout_reason = "assoc";
+				break;
+			default:
+				break;
+			}
+		}
 		wpa_supplicant_event(drv->ctx, EVENT_ASSOC_REJECT, &event);
 		return;
 	}
@@ -860,6 +879,8 @@
 		   MAC2STR(data + 4 + ETH_ALEN));
 	if (cmd != NL80211_CMD_FRAME_TX_STATUS && !(data[4] & 0x01) &&
 	    os_memcmp(bss->addr, data + 4, ETH_ALEN) != 0 &&
+	    (is_zero_ether_addr(bss->rand_addr) ||
+	     os_memcmp(bss->rand_addr, data + 4, ETH_ALEN) != 0) &&
 	    os_memcmp(bss->addr, data + 4 + ETH_ALEN, ETH_ALEN) != 0) {
 		wpa_printf(MSG_MSGDUMP, "nl80211: %s: Ignore MLME frame event "
 			   "for foreign address", bss->ifname);
@@ -1724,7 +1745,7 @@
 			   tb[QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID],
 			   tb[QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE],
 			   tb[QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE],
-			   NULL,
+			   NULL, NULL,
 			   tb[QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED],
 			   tb[QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR],
 			   tb[QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK],
@@ -2244,6 +2265,7 @@
 				   tb[NL80211_ATTR_REQ_IE],
 				   tb[NL80211_ATTR_RESP_IE],
 				   tb[NL80211_ATTR_TIMED_OUT],
+				   tb[NL80211_ATTR_TIMEOUT_REASON],
 				   NULL, NULL, NULL, NULL, NULL);
 		break;
 	case NL80211_CMD_CH_SWITCH_NOTIFY:
diff --git a/src/drivers/driver_nl80211_scan.c b/src/drivers/driver_nl80211_scan.c
index b577531..4417721 100644
--- a/src/drivers/driver_nl80211_scan.c
+++ b/src/drivers/driver_nl80211_scan.c
@@ -562,6 +562,39 @@
 		nla_nest_end(msg, match_sets);
 	}
 
+	if (params->relative_rssi_set) {
+		struct nl80211_bss_select_rssi_adjust rssi_adjust;
+
+		os_memset(&rssi_adjust, 0, sizeof(rssi_adjust));
+		wpa_printf(MSG_DEBUG, "nl80211: Relative RSSI: %d",
+			   params->relative_rssi);
+		if (nla_put_u32(msg, NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
+				params->relative_rssi))
+			goto fail;
+
+		if (params->relative_adjust_rssi) {
+			int pref_band_set = 1;
+
+			switch (params->relative_adjust_band) {
+			case WPA_SETBAND_5G:
+				rssi_adjust.band = NL80211_BAND_5GHZ;
+				break;
+			case WPA_SETBAND_2G:
+				rssi_adjust.band = NL80211_BAND_2GHZ;
+				break;
+			default:
+				pref_band_set = 0;
+				break;
+			}
+			rssi_adjust.delta = params->relative_adjust_rssi;
+
+			if (pref_band_set &&
+			    nla_put(msg, NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
+				    sizeof(rssi_adjust), &rssi_adjust))
+				goto fail;
+		}
+	}
+
 	ret = send_and_recv_msgs(drv, msg, NULL, NULL);
 
 	/* TODO: if we get an error here, we should fall back to normal scan */
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index 174f4b3..d6c62ee 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -1772,7 +1772,9 @@
  *
  * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode
  *	Notification Element based on association request when used with
- *	%NL80211_CMD_NEW_STATION; u8 attribute.
+ *	%NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when
+ *	%NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS);
+ *	u8 attribute.
  *
  * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
  *	%NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
@@ -1982,6 +1984,24 @@
  * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
  *	used in various commands/events for specifying the BSSID.
  *
+ * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which
+ *	other BSSs has to be better or slightly worse than the current
+ *	connected BSS so that they get reported to user space.
+ *	This will give an opportunity to userspace to consider connecting to
+ *	other matching BSSs which have better or slightly worse RSSI than
+ *	the current connected BSS by using an offloaded operation to avoid
+ *	unnecessary wakeups.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
+ *	the specified band is to be adjusted before doing
+ *	%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparision to figure out
+ *	better BSSs. The attribute value is a packed structure
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
+ *
+ * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out.
+ *	u32 attribute with an &enum nl80211_timeout_reason value. This is used,
+ *	e.g., with %NL80211_CMD_CONNECT event.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2388,6 +2408,11 @@
 
 	NL80211_ATTR_BSSID,
 
+	NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
+	NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
+
+	NL80211_ATTR_TIMEOUT_REASON,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3080,6 +3105,13 @@
  *	how this API was implemented in the past. Also, due to the same problem,
  *	the only way to create a matchset with only an RSSI filter (with this
  *	attribute) is if there's only a single matchset with the RSSI attribute.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether
+ *	%NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or
+ *	relative to current bss's RSSI.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for
+ *	BSS-es in the specified band is to be adjusted before doing
+ *	RSSI-based BSS selection. The attribute value is a packed structure
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *	attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -3089,6 +3121,8 @@
 
 	NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
 	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
+	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
+	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
 
 	/* keep last */
 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -4699,6 +4733,13 @@
  *	configuration (AP/mesh) with VHT rates.
  * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
  *	with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA
+ *	in @NL80211_CMD_FRAME while not associated.
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
+ *	randomized TA in @NL80211_CMD_FRAME while associated.
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
+ *	for reporting BSSs with better RSSI than the current connected BSS
+ *	(%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4714,6 +4755,9 @@
 	NL80211_EXT_FEATURE_BEACON_RATE_HT,
 	NL80211_EXT_FEATURE_BEACON_RATE_VHT,
 	NL80211_EXT_FEATURE_FILS_STA,
+	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
+	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
+	NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -4753,6 +4797,21 @@
 };
 
 /**
+ * enum nl80211_timeout_reason - timeout reasons
+ *
+ * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified.
+ * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out.
+ * @NL80211_TIMEOUT_AUTH: Authentication timed out.
+ * @NL80211_TIMEOUT_ASSOC: Association timed out.
+ */
+enum nl80211_timeout_reason {
+	NL80211_TIMEOUT_UNSPECIFIED,
+	NL80211_TIMEOUT_SCAN,
+	NL80211_TIMEOUT_AUTH,
+	NL80211_TIMEOUT_ASSOC,
+};
+
+/**
  * enum nl80211_scan_flags -  scan request control flags
  *
  * Scan request control flags are used to control the handling