Cumulative patch from commit 128f6a98b3d4d6ed103db759707309f451db9682
128f6a98b mka: Fix the order of operations in secure channel deletion
213eb1885 dbus: Set mode to mesh in bss properties when mesh is supported
21fda4ee7 RSN: Fix pre-authentication EAPOL-Start startPeriod configuration
3f23260da nl80211: Notify reason for connection timeout failure
ca1ab9db2 hostapd: Get vendor HE capabilities
7785c70bb QCA vendor command for fetching HE capabilities
d512f406f hostapd: Add IEEE 802.11ax HE IEs into Beacon/Probe Response frames
94380cb40 hostapd: Initial IEEE 802.11ax (HE) definitions
5972dc73c mesh: Use correct rate in VHT and HT mixed environment
84ea61cff mesh: Use correct rate in HT and legacy mixed environment
025c6a47f VHT: Remove a redundant check
a7a638c2c hw_features: Move VHT capabilities checks to common
e01cf2afc Define eapol_sm_get_eap_proxy_imsi() only with CONFIG_EAP_PROXY=y
a8e25deeb FT: Merge similar error paths to use common steps
c6c41f6ea FT: Support addition of RIC elements into Reassociation Request frame
ecbdc1a1f Mark RSN msg 1/2 key data debug dump as key material
834c5d681 FILS: Fix PMK length for initial connection with FILS SHA384 AKM
e491389eb FILS: Fix ifdef for PTK derivation with SHA384-based AKM
62944f7d2 Add HMAC-SHA384 with internal crypto
aeecd4eae OpenSSL: Fix hmac_sha384_vector() implementation
5db32adc9 browser-wpadebug: Send HTTP response with HTTP/1.1 header
79329ae0a P2P: Verify local driver preferred frequencies for P2P use cases
3a7819f0a P2P: Add P2P_SET override_pref_op_chan to allow overriding preference
c06fca04f Add wpa_supplicant SET get_pref_freq_list_override
b4d56efb1 Use throughput estimate-based BSS selection with larger SNR difference
142041487 Drop GREAT_SNR definition from 30 to 25 dB
364c064a4 FT: Check key derivation results explicitly in AP operations
b5562a1a6 FILS: Remove CRC32 dependency from build
5cf0930f9 testS: Additional BSS TM error case coverage
885bbd4de WNM: Remove unused code from BSS TM Req generation
e7ddd86a9 WNM: Use a common error path in ieee802_11_send_wnmsleep_resp()
d6d5970e2 WNM: Fix WNM-Sleep Mode Request parsing for WNM-Sleep element
8492cc79c PeerKey: Remove dead code related to STSL negotiation state
e37c0aa5d OSU server: Remove invalid options from documentation
0d6056703 WMM: Fix estimated medium time calculation for some corner cases
ae26d3021 Fix "IEEE 802.11: Ignored Action frame" debug message
4ead4c7ec WMM: Remove obsolete TODO comments
577e794eb Sync android.config with wpa_supplicant defconfig changes
784710b7f Add bgscan options to wpa_supplicant defconfig
212a8f487 Fix wpa_supplicant defconfig copy-paste description
57c3a605c Add support to sched scan to report relatively better BSSs
20c846d9e nl80211: sched_scan relative RSSI parameters
37e9f511e mka: Send MKPDUs forever if mode is PSK
76aa31838 EAP: Call deinit_for_reauth() for Phase 2 EAP methods
02156b98b EAP-AKA: Don't use anonymous identity in phase2
9e2afe10e EAP-SIM: Don't use anonymous identity in phase2
ed9b1c16d EAP peer: Cache decrypted requests for EAP-SIM/AKA/AKA'
5f11880f6 SME: Remove null ie param from CTRL-EVENT-AUTH-REJECT
4d70b2a4e RRM: Fix a memory leak in beacon request handling
401243b73 RRM: Fix range request overriding
fb81c0a3d RRM: Merge similar error returns to a single one
13b30052d RRM: Fix Range Request max age parsing
bd6ec7f7c Fix MAC ACL query freeing on deinit
b4fd1f0ed Allow PNO scan also in connection completed state
4c6f450ca Add radio_work_is_connect() helper
85b6b6b6e Serialize scan/p2p-scan if already scheduled on the same interface
fcb303a57 P2P: Clear driver scan cache after BSS_FLUSH
0d6dc6830 FILS: Clean up HLP resize check
1d9d21f37 GAS: Add support to randomize transmitter address
8331c9b31 nl80211: Add support for mgmt_tx with random TA
14fa723a9 Sync with mac80211-next.git include/uapi/linux/nl80211.h
65ab7eb1f GAS: Fix OSU Providers List response with invalid configuration
f3e157057 VHT: Fill VHT capability with hardware capability
4bb9b674c Add a log message when GTK rekeying failed
41f140d38 Add hostapd options wpa_group_update_count and wpa_pairwise_update_count
e54691106 mka: Some bug fixes for MACsec in PSK mode
7faf403f9 mka: Fix an incorrect update of participant->to_use_sak
00e0f0b01 hs20-osu-client: Hide a trivial compiler warning
276e93654 hw_features: Clean center freq for falling back HT40 channels
f47f93617 P2P: Override P2P_PEER group_capab with 0 if no matching BSS entry found
bcf66493c Fix estimated throughput based skip-roam case
84bb12aa6 FILS: Fix send_assoc_resp() HLP extension to cover sta == NULL
275cc9428 FILS: Stop processing if fils_rmsk_to_pmk() fails
caab23f19 Set EAPOL-Key Key Length field to 0 for group message 1/2 in RSN
b0fb2be77 Do not send GNonce in EAPOL-Key group message 1/2
3bbc47050 Fix EAPOL-Key Install bit in Group Key 1/2 with FT and FILS auth
db5e53cb0 mesh: Fix struct hostapd_data initialization
9b170991a mesh: Fix mesh interface removal fix
945604a35 Update wpaspy.py to be python3 compatible
4d6e79f86 Use defines in hostapd_set_freq_params()
0217b8d87 eloop: Fix comments mismatch eloop_event/timeout_handler definitions
09a97eb27 Update the copyright notice years for QCA vendor definitions
841e9a8c7 QCA vendor command to set the trace levels for the specific QCA module
d77f33041 FILS: Fix AES-SIV AAD for (Re)Association Request frame decryption
7a6c3de23 ERP: Use macro for EMSKname length instead of hardcoded integer value
bb3ea71a2 ERP: Fix rIK derivation
124ddfa19 FILS: Parse and report received FILS HLP Containers from response
91d91abf6 FILS: DHCP relay for HLP requests
54b04d6f3 FILS: Move HLP request handling into a separate file
5a9d50493 ProxyARP: Use more robust DHCP option parsing
e64c13feb Move DHCP definitions into a common file
70407ee5c Add QCA vendor definitions for BSS transition status
53d171440 AP: Check ACL upon association request for 802.11ad
4cc61c386 GAS: Set temporary session timeout bigger than gas_comeback_delay
Test: Wifi Suite
Change-Id: Id597d7cba5d2b3875f2dbbeb9a10fd5e69a6a7c2
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index 174f4b3..d6c62ee 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -1772,7 +1772,9 @@
*
* @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode
* Notification Element based on association request when used with
- * %NL80211_CMD_NEW_STATION; u8 attribute.
+ * %NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when
+ * %NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS);
+ * u8 attribute.
*
* @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
* %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
@@ -1982,6 +1984,24 @@
* @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
* used in various commands/events for specifying the BSSID.
*
+ * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which
+ * other BSSs has to be better or slightly worse than the current
+ * connected BSS so that they get reported to user space.
+ * This will give an opportunity to userspace to consider connecting to
+ * other matching BSSs which have better or slightly worse RSSI than
+ * the current connected BSS by using an offloaded operation to avoid
+ * unnecessary wakeups.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
+ * the specified band is to be adjusted before doing
+ * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparision to figure out
+ * better BSSs. The attribute value is a packed structure
+ * value as specified by &struct nl80211_bss_select_rssi_adjust.
+ *
+ * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out.
+ * u32 attribute with an &enum nl80211_timeout_reason value. This is used,
+ * e.g., with %NL80211_CMD_CONNECT event.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2388,6 +2408,11 @@
NL80211_ATTR_BSSID,
+ NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
+ NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
+
+ NL80211_ATTR_TIMEOUT_REASON,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -3080,6 +3105,13 @@
* how this API was implemented in the past. Also, due to the same problem,
* the only way to create a matchset with only an RSSI filter (with this
* attribute) is if there's only a single matchset with the RSSI attribute.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether
+ * %NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or
+ * relative to current bss's RSSI.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for
+ * BSS-es in the specified band is to be adjusted before doing
+ * RSSI-based BSS selection. The attribute value is a packed structure
+ * value as specified by &struct nl80211_bss_select_rssi_adjust.
* @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
* attribute number currently defined
* @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -3089,6 +3121,8 @@
NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
+ NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
+ NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
/* keep last */
__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -4699,6 +4733,13 @@
* configuration (AP/mesh) with VHT rates.
* @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
* with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA
+ * in @NL80211_CMD_FRAME while not associated.
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
+ * randomized TA in @NL80211_CMD_FRAME while associated.
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
+ * for reporting BSSs with better RSSI than the current connected BSS
+ * (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4714,6 +4755,9 @@
NL80211_EXT_FEATURE_BEACON_RATE_HT,
NL80211_EXT_FEATURE_BEACON_RATE_VHT,
NL80211_EXT_FEATURE_FILS_STA,
+ NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
+ NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
+ NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -4753,6 +4797,21 @@
};
/**
+ * enum nl80211_timeout_reason - timeout reasons
+ *
+ * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified.
+ * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out.
+ * @NL80211_TIMEOUT_AUTH: Authentication timed out.
+ * @NL80211_TIMEOUT_ASSOC: Association timed out.
+ */
+enum nl80211_timeout_reason {
+ NL80211_TIMEOUT_UNSPECIFIED,
+ NL80211_TIMEOUT_SCAN,
+ NL80211_TIMEOUT_AUTH,
+ NL80211_TIMEOUT_ASSOC,
+};
+
+/**
* enum nl80211_scan_flags - scan request control flags
*
* Scan request control flags are used to control the handling