Cumulative patch from commit 128f6a98b3d4d6ed103db759707309f451db9682
128f6a98b mka: Fix the order of operations in secure channel deletion
213eb1885 dbus: Set mode to mesh in bss properties when mesh is supported
21fda4ee7 RSN: Fix pre-authentication EAPOL-Start startPeriod configuration
3f23260da nl80211: Notify reason for connection timeout failure
ca1ab9db2 hostapd: Get vendor HE capabilities
7785c70bb QCA vendor command for fetching HE capabilities
d512f406f hostapd: Add IEEE 802.11ax HE IEs into Beacon/Probe Response frames
94380cb40 hostapd: Initial IEEE 802.11ax (HE) definitions
5972dc73c mesh: Use correct rate in VHT and HT mixed environment
84ea61cff mesh: Use correct rate in HT and legacy mixed environment
025c6a47f VHT: Remove a redundant check
a7a638c2c hw_features: Move VHT capabilities checks to common
e01cf2afc Define eapol_sm_get_eap_proxy_imsi() only with CONFIG_EAP_PROXY=y
a8e25deeb FT: Merge similar error paths to use common steps
c6c41f6ea FT: Support addition of RIC elements into Reassociation Request frame
ecbdc1a1f Mark RSN msg 1/2 key data debug dump as key material
834c5d681 FILS: Fix PMK length for initial connection with FILS SHA384 AKM
e491389eb FILS: Fix ifdef for PTK derivation with SHA384-based AKM
62944f7d2 Add HMAC-SHA384 with internal crypto
aeecd4eae OpenSSL: Fix hmac_sha384_vector() implementation
5db32adc9 browser-wpadebug: Send HTTP response with HTTP/1.1 header
79329ae0a P2P: Verify local driver preferred frequencies for P2P use cases
3a7819f0a P2P: Add P2P_SET override_pref_op_chan to allow overriding preference
c06fca04f Add wpa_supplicant SET get_pref_freq_list_override
b4d56efb1 Use throughput estimate-based BSS selection with larger SNR difference
142041487 Drop GREAT_SNR definition from 30 to 25 dB
364c064a4 FT: Check key derivation results explicitly in AP operations
b5562a1a6 FILS: Remove CRC32 dependency from build
5cf0930f9 testS: Additional BSS TM error case coverage
885bbd4de WNM: Remove unused code from BSS TM Req generation
e7ddd86a9 WNM: Use a common error path in ieee802_11_send_wnmsleep_resp()
d6d5970e2 WNM: Fix WNM-Sleep Mode Request parsing for WNM-Sleep element
8492cc79c PeerKey: Remove dead code related to STSL negotiation state
e37c0aa5d OSU server: Remove invalid options from documentation
0d6056703 WMM: Fix estimated medium time calculation for some corner cases
ae26d3021 Fix "IEEE 802.11: Ignored Action frame" debug message
4ead4c7ec WMM: Remove obsolete TODO comments
577e794eb Sync android.config with wpa_supplicant defconfig changes
784710b7f Add bgscan options to wpa_supplicant defconfig
212a8f487 Fix wpa_supplicant defconfig copy-paste description
57c3a605c Add support to sched scan to report relatively better BSSs
20c846d9e nl80211: sched_scan relative RSSI parameters
37e9f511e mka: Send MKPDUs forever if mode is PSK
76aa31838 EAP: Call deinit_for_reauth() for Phase 2 EAP methods
02156b98b EAP-AKA: Don't use anonymous identity in phase2
9e2afe10e EAP-SIM: Don't use anonymous identity in phase2
ed9b1c16d EAP peer: Cache decrypted requests for EAP-SIM/AKA/AKA'
5f11880f6 SME: Remove null ie param from CTRL-EVENT-AUTH-REJECT
4d70b2a4e RRM: Fix a memory leak in beacon request handling
401243b73 RRM: Fix range request overriding
fb81c0a3d RRM: Merge similar error returns to a single one
13b30052d RRM: Fix Range Request max age parsing
bd6ec7f7c Fix MAC ACL query freeing on deinit
b4fd1f0ed Allow PNO scan also in connection completed state
4c6f450ca Add radio_work_is_connect() helper
85b6b6b6e Serialize scan/p2p-scan if already scheduled on the same interface
fcb303a57 P2P: Clear driver scan cache after BSS_FLUSH
0d6dc6830 FILS: Clean up HLP resize check
1d9d21f37 GAS: Add support to randomize transmitter address
8331c9b31 nl80211: Add support for mgmt_tx with random TA
14fa723a9 Sync with mac80211-next.git include/uapi/linux/nl80211.h
65ab7eb1f GAS: Fix OSU Providers List response with invalid configuration
f3e157057 VHT: Fill VHT capability with hardware capability
4bb9b674c Add a log message when GTK rekeying failed
41f140d38 Add hostapd options wpa_group_update_count and wpa_pairwise_update_count
e54691106 mka: Some bug fixes for MACsec in PSK mode
7faf403f9 mka: Fix an incorrect update of participant->to_use_sak
00e0f0b01 hs20-osu-client: Hide a trivial compiler warning
276e93654 hw_features: Clean center freq for falling back HT40 channels
f47f93617 P2P: Override P2P_PEER group_capab with 0 if no matching BSS entry found
bcf66493c Fix estimated throughput based skip-roam case
84bb12aa6 FILS: Fix send_assoc_resp() HLP extension to cover sta == NULL
275cc9428 FILS: Stop processing if fils_rmsk_to_pmk() fails
caab23f19 Set EAPOL-Key Key Length field to 0 for group message 1/2 in RSN
b0fb2be77 Do not send GNonce in EAPOL-Key group message 1/2
3bbc47050 Fix EAPOL-Key Install bit in Group Key 1/2 with FT and FILS auth
db5e53cb0 mesh: Fix struct hostapd_data initialization
9b170991a mesh: Fix mesh interface removal fix
945604a35 Update wpaspy.py to be python3 compatible
4d6e79f86 Use defines in hostapd_set_freq_params()
0217b8d87 eloop: Fix comments mismatch eloop_event/timeout_handler definitions
09a97eb27 Update the copyright notice years for QCA vendor definitions
841e9a8c7 QCA vendor command to set the trace levels for the specific QCA module
d77f33041 FILS: Fix AES-SIV AAD for (Re)Association Request frame decryption
7a6c3de23 ERP: Use macro for EMSKname length instead of hardcoded integer value
bb3ea71a2 ERP: Fix rIK derivation
124ddfa19 FILS: Parse and report received FILS HLP Containers from response
91d91abf6 FILS: DHCP relay for HLP requests
54b04d6f3 FILS: Move HLP request handling into a separate file
5a9d50493 ProxyARP: Use more robust DHCP option parsing
e64c13feb Move DHCP definitions into a common file
70407ee5c Add QCA vendor definitions for BSS transition status
53d171440 AP: Check ACL upon association request for 802.11ad
4cc61c386 GAS: Set temporary session timeout bigger than gas_comeback_delay
Test: Wifi Suite
Change-Id: Id597d7cba5d2b3875f2dbbeb9a10fd5e69a6a7c2
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index 25800d4..934f09d 100644
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -1,6 +1,6 @@
/*
* Qualcomm Atheros OUI and vendor specific assignments
- * Copyright (c) 2014-2015, Qualcomm Atheros, Inc.
+ * Copyright (c) 2014-2017, Qualcomm Atheros, Inc.
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
@@ -233,6 +233,10 @@
* in the host driver. The different TDLS configurations are defined
* by the attributes in enum qca_wlan_vendor_attr_tdls_configuration.
*
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES: Query device IEEE 802.11ax HE
+ * capabilities. The response uses the attributes defined in
+ * enum qca_wlan_vendor_attr_get_he_capabilities.
+ *
* @QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN: Abort an ongoing vendor scan that was
* started with QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN. This command
* carries the scan cookie of the corresponding scan request. The scan
@@ -267,6 +271,23 @@
* @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET: Get the NUD statistics. These
* statistics are represented by the enum qca_attr_nud_stats_get
* attributes.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS: Sub-command to fetch
+ * the BSS transition status, whether accept or reject, for a list of
+ * candidate BSSIDs provided by the userspace. This uses the vendor
+ * attributes QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON and
+ * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO. The userspace shall specify
+ * the attributes QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON and an
+ * array of QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID nested in
+ * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO in the request. In the response
+ * the driver shall specify array of
+ * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID and
+ * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_STATUS pairs nested in
+ * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL: Set the trace level for a
+ * specific QCA module. The trace levels are represented by
+ * enum qca_attr_trace_level attributes.
*/
enum qca_nl80211_vendor_subcmds {
QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
@@ -385,13 +406,15 @@
QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR = 141,
QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR = 142,
QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS = 143,
- /* 144 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES = 144,
QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN = 145,
QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS = 146,
QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS = 147,
QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE = 148,
QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET = 149,
QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET = 150,
+ QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS = 151,
+ QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL = 152,
};
@@ -534,6 +557,22 @@
*/
QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_NUM = 34,
QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_INFO = 35,
+ /* Unsigned 8-bit value representing MBO transition reason code as
+ * provided by the AP used by subcommand
+ * QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS. This is
+ * specified by the userspace in the request to the driver.
+ */
+ QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON = 36,
+ /* Array of nested attributes, BSSID and status code, used by subcommand
+ * QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS, where each
+ * entry is taken from enum qca_wlan_vendor_attr_btm_candidate_info.
+ * The userspace space specifies the list/array of candidate BSSIDs in
+ * the order of preference in the request. The driver specifies the
+ * status code, for each BSSID in the list, in the response. The
+ * acceptable candidates are listed in the order preferred by the
+ * driver.
+ */
+ QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO = 37,
/* keep last */
QCA_WLAN_VENDOR_ATTR_AFTER_LAST,
@@ -3304,4 +3343,83 @@
QCA_ATTR_NUD_STATS_GET_LAST - 1,
};
+enum qca_wlan_btm_candidate_status {
+ QCA_STATUS_ACCEPT = 0,
+ QCA_STATUS_REJECT_EXCESSIVE_FRAME_LOSS_EXPECTED = 1,
+ QCA_STATUS_REJECT_EXCESSIVE_DELAY_EXPECTED = 2,
+ QCA_STATUS_REJECT_INSUFFICIENT_QOS_CAPACITY = 3,
+ QCA_STATUS_REJECT_LOW_RSSI = 4,
+ QCA_STATUS_REJECT_HIGH_INTERFERENCE = 5,
+ QCA_STATUS_REJECT_UNKNOWN = 6,
+};
+
+enum qca_wlan_vendor_attr_btm_candidate_info {
+ QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_INVALID = 0,
+
+ /* 6-byte MAC address representing the BSSID of transition candidate */
+ QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID = 1,
+ /* Unsigned 32-bit value from enum qca_wlan_btm_candidate_status
+ * returned by the driver. It says whether the BSSID provided in
+ * QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID is acceptable by
+ * the driver, if not it specifies the reason for rejection.
+ * Note that the user-space can overwrite the transition reject reason
+ * codes provided by driver based on more information.
+ */
+ QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_STATUS = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_AFTER_LAST - 1,
+};
+
+enum qca_attr_trace_level {
+ QCA_ATTR_TRACE_LEVEL_INVALID = 0,
+ /*
+ * Nested array of the following attributes:
+ * QCA_ATTR_TRACE_LEVEL_MODULE,
+ * QCA_ATTR_TRACE_LEVEL_MASK.
+ */
+ QCA_ATTR_TRACE_LEVEL_PARAM = 1,
+ /*
+ * Specific QCA host driver module. Please refer to the QCA host
+ * driver implementation to get the specific module ID.
+ */
+ QCA_ATTR_TRACE_LEVEL_MODULE = 2,
+ /* Different trace level masks represented in the QCA host driver. */
+ QCA_ATTR_TRACE_LEVEL_MASK = 3,
+
+ /* keep last */
+ QCA_ATTR_TRACE_LEVEL_AFTER_LAST,
+ QCA_ATTR_TRACE_LEVEL_MAX =
+ QCA_ATTR_TRACE_LEVEL_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_he_capabilities - IEEE 802.11ax HE capabilities
+ */
+enum qca_wlan_vendor_attr_get_he_capabilities {
+ QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_INVALID = 0,
+ /* Whether HE capabilities is supported
+ * (u8 attribute: 0 = not supported, 1 = supported) */
+ QCA_WLAN_VENDOR_ATTR_HE_SUPPORTED = 1,
+ /* HE PHY capabilities, array of 3 u32 values */
+ QCA_WLAN_VENDOR_ATTR_PHY_CAPAB = 2,
+ /* HE MAC capabilities (u32 attribute) */
+ QCA_WLAN_VENDOR_ATTR_MAC_CAPAB = 3,
+ /* HE MCS map (u32 attribute) */
+ QCA_WLAN_VENDOR_ATTR_HE_MCS = 4,
+ /* Number of SS (u32 attribute) */
+ QCA_WLAN_VENDOR_ATTR_NUM_SS = 5,
+ /* RU count (u32 attribute) */
+ QCA_WLAN_VENDOR_ATTR_RU_IDX_MASK = 6,
+ /* PPE threshold data, array of 8 u32 values */
+ QCA_WLAN_VENDOR_ATTR_PPE_THRESHOLD = 7,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_MAX =
+ QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_AFTER_LAST - 1,
+};
+
#endif /* QCA_VENDOR_H */