diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index c4eebff..f558855 100644
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -98,8 +98,25 @@
 # Country code (ISO/IEC 3166-1). Used to set regulatory domain.
 # Set as needed to indicate country in which device is operating.
 # This can limit available channels and transmit power.
+# These two octets are used as the first two octets of the Country String
+# (dot11CountryString)
 #country_code=US
 
+# The third octet of the Country String (dot11CountryString)
+# This parameter is used to set the third octet of the country string.
+#
+# All environments of the current frequency band and country (default)
+#country3=0x20
+# Outdoor environment only
+#country3=0x4f
+# Indoor environment only
+#country3=0x49
+# Noncountry entity (country_code=XX)
+#country3=0x58
+# IEEE 802.11 standard Annex E table indication: 0x01 .. 0x1f
+# Annex E, Table E-4 (Global operating classes)
+#country3=0x04
+
 # Enable IEEE 802.11d. This advertises the country_code and the set of allowed
 # channels and transmit power levels based on the regulatory limits. The
 # country_code setting must be configured with the correct country for
@@ -182,6 +199,11 @@
 #chanlist=100 104 108 112 116
 #chanlist=1 6 11-13
 
+# Exclude DFS channels from ACS
+# This option can be used to exclude all DFS channels from the ACS channel list
+# in cases where the driver supports DFS channels.
+#acs_exclude_dfs=1
+
 # Beacon interval in kus (1.024 ms) (default: 100; range 15..65535)
 beacon_int=100
 
@@ -511,6 +533,10 @@
 #
 #multicast_to_unicast=0
 
+# Send broadcast Deauthentication frame on AP start/stop
+# Default: 1 (enabled)
+#broadcast_deauth=1
+
 ##### IEEE 802.11n related configuration ######################################
 
 # ieee80211n: Whether IEEE 802.11n (HT) is enabled
@@ -905,7 +931,8 @@
 # OpenSSL cipher string
 #
 # This is an OpenSSL specific configuration option for configuring the default
-# ciphers. If not set, "DEFAULT:!EXP:!LOW" is used as the default.
+# ciphers. If not set, the value configured at build time ("DEFAULT:!EXP:!LOW"
+# by default) is used.
 # See https://www.openssl.org/docs/apps/ciphers.html for OpenSSL documentation
 # on cipher suite configuration. This is applicable only if hostapd is built to
 # use OpenSSL.
@@ -1256,7 +1283,10 @@
 
 # Time interval for rekeying GTK (broadcast/multicast encryption keys) in
 # seconds. (dot11RSNAConfigGroupRekeyTime)
-#wpa_group_rekey=600
+# This defaults to 86400 seconds (once per day) when using CCMP/GCMP as the
+# group cipher and 600 seconds (once per 10 minutes) when using TKIP as the
+# group cipher.
+#wpa_group_rekey=86400
 
 # Rekey GTK when any STA that possesses the current GTK is leaving the BSS.
 # (dot11RSNAConfigGroupRekeyStrict)
@@ -1285,6 +1315,30 @@
 # Range 1..4294967295; default: 4
 #wpa_pairwise_update_count=4
 
+# Workaround for key reinstallation attacks
+#
+# This parameter can be used to disable retransmission of EAPOL-Key frames that
+# are used to install keys (EAPOL-Key message 3/4 and group message 1/2). This
+# is similar to setting wpa_group_update_count=1 and
+# wpa_pairwise_update_count=1, but with no impact to message 1/4 and with
+# extended timeout on the response to avoid causing issues with stations that
+# may use aggressive power saving have very long time in replying to the
+# EAPOL-Key messages.
+#
+# This option can be used to work around key reinstallation attacks on the
+# station (supplicant) side in cases those station devices cannot be updated
+# for some reason. By removing the retransmissions the attacker cannot cause
+# key reinstallation with a delayed frame transmission. This is related to the
+# station side vulnerabilities CVE-2017-13077, CVE-2017-13078, CVE-2017-13079,
+# CVE-2017-13080, and CVE-2017-13081.
+#
+# This workaround might cause interoperability issues and reduced robustness of
+# key negotiation especially in environments with heavy traffic load due to the
+# number of attempts to perform the key exchange is reduced significantly. As
+# such, this workaround is disabled by default (unless overridden in build
+# configuration). To enable this, set the parameter to 1.
+#wpa_disable_eapol_key_retries=1
+
 # Enable IEEE 802.11i/RSN/WPA2 pre-authentication. This is used to speed up
 # roaming be pre-authenticating IEEE 802.1X/EAP part of the full RSN
 # authentication and key handshake before actually associating with a new AP.
@@ -1300,12 +1354,6 @@
 # one.
 #rsn_preauth_interfaces=eth0
 
-# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e) is
-# allowed. This is only used with RSN/WPA2.
-# 0 = disabled (default)
-# 1 = enabled
-#peerkey=1
-
 # ieee80211w: Whether management frame protection (MFP) is enabled
 # 0 = disabled (default)
 # 1 = optional
@@ -1348,6 +1396,15 @@
 # 1 = enabled
 #okc=1
 
+# SAE password
+# This parameter can be used to set a password for SAE. By default, the
+# wpa_passphrase value is used if this separate parameter is not used, but
+# wpa_passphrase follows the WPA-PSK constraints (8..63 characters) even though
+# SAE passwords do not have such constraints. If the BSS enabled both SAE and
+# WPA-PSK and both values are set, SAE uses the sae_password value and WPA-PSK
+# uses the wpa_passphrase value.
+#sae_password=secret
+
 # SAE threshold for anti-clogging mechanism (dot11RSNASAEAntiCloggingThreshold)
 # This parameter defines how many open SAE instances can be in progress at the
 # same time before the anti-clogging mechanism is taken into use.
@@ -1372,6 +1429,29 @@
 #fils_realm=example.com
 #fils_realm=example.org
 
+# FILS DH Group for PFS
+# 0 = PFS disabled with FILS shared key authentication (default)
+# 1-65535 DH Group to use for FILS PFS
+#fils_dh_group=0
+
+# OWE DH groups
+# OWE implementations are required to support group 19 (NIST P-256). All groups
+# that are supported by the implementation (e.g., groups 19, 20, and 21 when
+# using OpenSSL) are enabled by default. This configuration parameter can be
+# used to specify a limited set of allowed groups. The group values are listed
+# in the IANA registry:
+# http://www.iana.org/assignments/ipsec-registry/ipsec-registry.xml#ipsec-registry-10
+#owe_groups=19 20 21
+
+# OWE transition mode configuration
+# Pointer to the matching open/OWE BSS
+#owe_transition_bssid=<bssid>
+# SSID in same format as ssid2 described above.
+#owe_transition_ssid=<SSID>
+# Alternatively, OWE transition mode BSSID/SSID can be configured with a
+# reference to a BSS operated by this hostapd process.
+#owe_transition_ifname=<ifname>
+
 # DHCP server for FILS HLP
 # If configured, hostapd will act as a DHCP relay for all FILS HLP requests
 # that include a DHCPDISCOVER message and send them to the specific DHCP
@@ -1426,22 +1506,52 @@
 #reassociation_deadline=1000
 
 # List of R0KHs in the same Mobility Domain
-# format: <MAC address> <NAS Identifier> <128-bit key as hex string>
+# format: <MAC address> <NAS Identifier> <256-bit key as hex string>
 # This list is used to map R0KH-ID (NAS Identifier) to a destination MAC
 # address when requesting PMK-R1 key from the R0KH that the STA used during the
 # Initial Mobility Domain Association.
-#r0kh=02:01:02:03:04:05 r0kh-1.example.com 000102030405060708090a0b0c0d0e0f
-#r0kh=02:01:02:03:04:06 r0kh-2.example.com 00112233445566778899aabbccddeeff
+#r0kh=02:01:02:03:04:05 r0kh-1.example.com 000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f
+#r0kh=02:01:02:03:04:06 r0kh-2.example.com 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff
 # And so on.. One line per R0KH.
+# Wildcard entry:
+# Upon receiving a response from R0KH, it will be added to this list, so
+# subsequent requests won't be broadcast. If R0KH does not reply, it will be
+# blacklisted.
+#r0kh=ff:ff:ff:ff:ff:ff * 00112233445566778899aabbccddeeff
 
 # List of R1KHs in the same Mobility Domain
-# format: <MAC address> <R1KH-ID> <128-bit key as hex string>
+# format: <MAC address> <R1KH-ID> <256-bit key as hex string>
 # This list is used to map R1KH-ID to a destination MAC address when sending
 # PMK-R1 key from the R0KH. This is also the list of authorized R1KHs in the MD
 # that can request PMK-R1 keys.
-#r1kh=02:01:02:03:04:05 02:11:22:33:44:55 000102030405060708090a0b0c0d0e0f
-#r1kh=02:01:02:03:04:06 02:11:22:33:44:66 00112233445566778899aabbccddeeff
+#r1kh=02:01:02:03:04:05 02:11:22:33:44:55 000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f
+#r1kh=02:01:02:03:04:06 02:11:22:33:44:66 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff
 # And so on.. One line per R1KH.
+# Wildcard entry:
+# Upon receiving a request from an R1KH not yet known, it will be added to this
+# list and thus will receive push notifications.
+#r1kh=00:00:00:00:00:00 00:00:00:00:00:00 00112233445566778899aabbccddeeff
+
+# Timeout (seconds) for newly discovered R0KH/R1KH (see wildcard entries above)
+# Special values: 0 -> do not expire
+# Warning: do not cache implies no sequence number validation with wildcards
+#rkh_pos_timeout=86400 (default = 1 day)
+
+# Timeout (milliseconds) for requesting PMK-R1 from R0KH using PULL request
+# and number of retries.
+#rkh_pull_timeout=1000 (default = 1 second)
+#rkh_pull_retries=4 (default)
+
+# Timeout (seconds) for non replying R0KH (see wildcard entries above)
+# Special values: 0 -> do not cache
+# default: 60 seconds
+#rkh_neg_timeout=60
+
+# Note: The R0KH/R1KH keys used to be 128-bit in length before the message
+# format was changed. That shorter key length is still supported for backwards
+# compatibility of the configuration files. If such a shorter key is used, a
+# 256-bit key is derived from it. For new deployments, configuring the 256-bit
+# key is recommended.
 
 # Whether PMK-R1 push is enabled at R0KH
 # 0 = do not push PMK-R1 to all configured R1KHs (default)
@@ -2014,6 +2124,28 @@
 #
 #osu_server_uri=...
 
+##### Multiband Operation (MBO) ###############################################
+#
+# MBO enabled
+# 0 = disabled (default)
+# 1 = enabled
+#mbo=1
+#
+# Cellular data connection preference
+# 0 = Excluded - AP does not want STA to use the cellular data connection
+# 1 = AP prefers the STA not to use cellular data connection
+# 255 = AP prefers the STA to use cellular data connection
+#mbo_cell_data_conn_pref=1
+
+##### Optimized Connectivity Experience (OCE) #################################
+#
+# Enable OCE specific features (bitmap)
+# BIT(0) - Reserved
+# Set BIT(1) (= 2) to enable OCE in STA-CFON mode
+# Set BIT(2) (= 4) to enable OCE in AP mode
+# Default is 0 = OCE disabled
+#oce=0
+
 ##### Fast Session Transfer (FST) support #####################################
 #
 # The options in this section are only available when the build configuration