Cumulative patch from commit d4f1a347ceca31fd9cf14070fd000235d5f4e9c1
d4f1a34 Allow AP mode configuration with VHT enabled on 2.4 GHz
bb337dd DFS: Do not use cf1 to override freq for 20 MHz channels
0dfd2c6 Document AP mode startup functions
fee947b hostapd: Use correct wpa_printf verbosity level for message
2fe210c hostapd: Fix multi-BSS configuration file parsing regression
e4ba031 hostapd: Use start_ctrl_iface() from hostapd_add_iface()
bf7f09b Fix AP mode QoS Map configuration to be per-BSS
dc036d9 DFS: Convert hostapd_data use to hostapd_iface
2db938e hostapd: Fill in phyname automatically
5ae6449 hostapd: Add ctrl_iface STATUS command
afadaff Optimize 40 MHz HT co-ex scan on AP
7d6d737 hostapd: Add AP-ENABLED/DISABLED ctrl_iface events
e1c5faf hostapd: Track interface state
f0793bf hostapd: Wait for channel list update after country code change
ae134e1 hostapd: Add ctrl_iface events for ACS
ad08e14 hostapd: Move ctrl_iface initialization to happen earlier
c20cb02 hostapd: Remove hostapd_interface_init2()
4a5deb9 hostapd: Simplify interface initialization
186c905 DFS: Add control interface events for various DFS events
ddf5517 hostapd: Add control interface test commands for radar detection
884f1a3 nl80211: Verify radar event attributes exist before using them
71cdf6b hostapd: Fix ENABLE failure to not remove interface
18ca733 SAE: Fix group selection
65015b2 Replace unnecessary UTF-8 characters with ASCII versions
61323e7 Convert perror/printf calls to wpa_printf
3f134b4 hostapd: Accept RELOG from global control interface
b253e6f hostapd: Use wpa_printf() for hostapd_logger() to stdout
c092d83 P2P: Clear pending group formation data on group removal
9100b66 P2P: Debug print reason for specific SSID for scan
2aec4f3 Allow add-BSS operation to re-use existing netdev
5592065 hostapd: Allow a single BSS to be removed from an interface
2e2fff3 hostapd: Allow a single BSS to be added to an interface
a1fb569 hostapd: Make hostapd_interface_init_bss() available externally
66936c6 hostapd: Make hostapd_init() available externally
390e489 hostapd: Allow the first BSS in a multi-BSS setup to be removed
834ee56 nl80211: Make wpa_driver_nl80211_data::first_bss pointer
748c0ac nl80211: Fix monitor interface reference counting
08e55eb nl80211: Add a debug print for DEL_BEACON
33b0b33 hostapd: Fix error path in hostapd_add_iface()
770ecdf ACS: Do not get stuck while failing to do a subsequent scan
813d4ba DFS: Add support for multi-BSS
954e71d DFS: Reset cac_started properly
6a398dd DFS: Sanitize channel availability checks
32595da DFS: Fix HT40/VHT calculation
0648c3b hostapd: Add -T Linux tracing option
392e68e Set GTK rekey offload information after initial group key handshake
bbc706a nl80211: Add debug prints for NL80211_CMD_SET_STATION
731ca63 Update regulatory change to all virtual interface for the phy
6f2db2f hostapd: Validate configuration parameters on RELOAD command
eff0fd1 hostapd: Move generic configuration functions into src/ap
5afaa06 hostapd: Allow per-BSS (vif) configuration files
ebd79f0 hostapd: Make hostapd_config::bss array of pointers
a781e21 hostapd: Force PSK to be derived again on BSS reload
9f104b0 hostapd: Reuse hostapd_clear_old() for RELOAD command
Change-Id: I7fbb26cbd4a2960af66a4373c0e6bbe5390a4940
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/src/radius/radius_server.c b/src/radius/radius_server.c
index 0144c9f..fe19770 100644
--- a/src/radius/radius_server.c
+++ b/src/radius/radius_server.c
@@ -679,7 +679,7 @@
buf = radius_msg_get_buf(msg);
if (sendto(data->auth_sock, wpabuf_head(buf), wpabuf_len(buf), 0,
(struct sockaddr *) from, sizeof(*from)) < 0) {
- perror("sendto[RADIUS SRV]");
+ wpa_printf(MSG_INFO, "sendto[RADIUS SRV]: %s", strerror(errno));
ret = -1;
}
@@ -750,7 +750,8 @@
wpabuf_len(buf), 0,
(struct sockaddr *) from, fromlen);
if (res < 0) {
- perror("sendto[RADIUS SRV]");
+ wpa_printf(MSG_INFO, "sendto[RADIUS SRV]: %s",
+ strerror(errno));
}
return 0;
}
@@ -842,7 +843,8 @@
wpabuf_len(buf), 0,
(struct sockaddr *) from, fromlen);
if (res < 0) {
- perror("sendto[RADIUS SRV]");
+ wpa_printf(MSG_INFO, "sendto[RADIUS SRV]: %s",
+ strerror(errno));
}
radius_msg_free(sess->last_reply);
sess->last_reply = reply;
@@ -897,7 +899,8 @@
len = recvfrom(sock, buf, RADIUS_MAX_MSG_LEN, 0,
(struct sockaddr *) &from.ss, &fromlen);
if (len < 0) {
- perror("recvfrom[radius_server]");
+ wpa_printf(MSG_INFO, "recvfrom[radius_server]: %s",
+ strerror(errno));
goto fail;
}
@@ -1001,7 +1004,7 @@
s = socket(PF_INET, SOCK_DGRAM, 0);
if (s < 0) {
- perror("socket");
+ wpa_printf(MSG_INFO, "RADIUS: socket: %s", strerror(errno));
return -1;
}
@@ -1011,7 +1014,7 @@
addr.sin_family = AF_INET;
addr.sin_port = htons(port);
if (bind(s, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
- perror("bind");
+ wpa_printf(MSG_INFO, "RADIUS: bind: %s", strerror(errno));
close(s);
return -1;
}
@@ -1028,7 +1031,8 @@
s = socket(PF_INET6, SOCK_DGRAM, 0);
if (s < 0) {
- perror("socket[IPv6]");
+ wpa_printf(MSG_INFO, "RADIUS: socket[IPv6]: %s",
+ strerror(errno));
return -1;
}
@@ -1037,7 +1041,7 @@
os_memcpy(&addr.sin6_addr, &in6addr_any, sizeof(in6addr_any));
addr.sin6_port = htons(port);
if (bind(s, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
- perror("bind");
+ wpa_printf(MSG_INFO, "RADIUS: bind: %s", strerror(errno));
close(s);
return -1;
}
@@ -1248,8 +1252,7 @@
#ifndef CONFIG_IPV6
if (conf->ipv6) {
- fprintf(stderr, "RADIUS server compiled without IPv6 "
- "support.\n");
+ wpa_printf(MSG_ERROR, "RADIUS server compiled without IPv6 support");
return NULL;
}
#endif /* CONFIG_IPV6 */
@@ -1305,7 +1308,7 @@
data->clients = radius_server_read_clients(conf->client_file,
conf->ipv6);
if (data->clients == NULL) {
- printf("No RADIUS clients configured.\n");
+ wpa_printf(MSG_ERROR, "No RADIUS clients configured");
radius_server_deinit(data);
return NULL;
}
@@ -1317,8 +1320,7 @@
#endif /* CONFIG_IPV6 */
data->auth_sock = radius_server_open_socket(conf->auth_port);
if (data->auth_sock < 0) {
- printf("Failed to open UDP socket for RADIUS authentication "
- "server\n");
+ wpa_printf(MSG_ERROR, "Failed to open UDP socket for RADIUS authentication server");
radius_server_deinit(data);
return NULL;
}