[wpa_supplicant] cumilative patch from commit a8655be0b
Bug: 369728263
Test: Connect to open, WPA2, WPA3 and OWE
Test: Establish P2P connection
Test: Basic SoftAp tests
Test: Ran above tests on Pixel6
Test: Regression test (TBD)
BYPASS_INCLUSIVE_LANGUAGE_REASON=Merged from open source
a8655be0b Fix documentation for vendor interface command
a803fa9da Include the NAN header file into driver.h to avoid C++ constraints
2d92cae65 nl80211: Check nla_parse_nested() result
ba6b3dc78 AP MLD: Fix link_id validity check for own links
ffc9fa013 Pass CSA parameters by reference instead by value
1527a95ba Add QCA vendor subcommand to trigger Channel Usage Request
c0c877a1f QCA vendor test configuration to add random PMKIDs in RSNE
a6fd2467b PASN: Allow frequency to be set for responder
d5c07aaab P2P2: Parse new attributes
0f854cb35 P2P2: Add PMKSA caches for PASN initiator and responder
8426e5274 PASN: Use allocated memory for RSNXE and allow its contents to be set
d582f8ce9 PASN: PASN Encrypted Data element parsing
58cc67c72 P2P2: Export p2p_build_go_neg_req()
ff97a762b P2P: Debug print details on address mapping errors
27de11ca5 nl80211: Configure capability flag for NAN USD offload
5cb1929da Add QCA vendor feature flags to indicate NAN USD offload support
58f04221f nl80211: NAN USD commands for offloading
456c3a023 P2P2: Do not include WPS IE in GO Negotiation
839b52eaf P2P2: Fragment P2P IE if subelements are too long in GO Negotiation
c958a571a P2P2: GO Negotiation Action frame contents for wrapped case
64bfba98b P2P: Use enum p2p_status_code more consistently for PD
e633b471b P2P2: Refactor GO Negotiation and Invitation processing
b7de417c8 PASN: Define PMKSA helper functions for initiator and responder
cb9b1f8c5 PASN: Optional KEK derivation in PTK
17a891fd5 P2P2: Notify bootstrapping request and completed events
11a573f31 P2P2: Add a new method to P2P_CONNECT control interface command
bde17063d hostapd: Do not indicate a punctured secondary channel in HT operation
809d9d817 macsec_linux: Hardware offload requires Linux headers >= v5.7
0012c4433 DPP: Support for provisioning SAE password identifiers (Configurator)
782c89c35 DPP: Support for provisioning SAE password identifiers (Enrollee)
de40e08f7 nl80211: Pass "global" events to all interfaces
c3ee46bcb AP MLD: Check SAE message length without depending on pointer arithemetic
63df62c6c AP MLD: Work around delayed STA entry addition for SAE confirm
14cb3906a AP MLD: Introduce MLD level control interface socket
61dfd7ae3 AP MLD: Create link based hostapd control sockets
b7963348c Add QCA vendor attribute to disable channel switch initiation
2b7277d3f USD: Move control interface events to notify.c
97c6ef258 QCA vendor interface to set the P2P mode configuration
e33acc217 Add QCA vendor attribute to change P2P GO beacon interval
59299a8a7 P2P2: Add bootstrapping support with PD frames
6aa9ad8f8 P2P2: Refactor provision discovery request/response processing
b4f9742ee P2P2: Process Element container attribute from NAN SDFs
fa389f2a3 P2P2: Parse P2P2 IE
25c6598f3 NAN USD: Add publishChannelList option for Subscriber
bcab29a78 P2P2: Device Identity Key generation and storage in configuration
58ba550c5 FT: Fix writing of ft_prepend_pmkid configuration parameter
5b0112a18 P2P2: Add DIRA attributes to P2P2 IE of NAN SDFs
29f70292e P2P2: Add PCEA and PBMA attributes to P2P2 IE of NAN SDFs
a58b2ba2f P2P2: Allow P2P IE to be added into NAN SDFs
ae221945f P2P2: New element and attribute definitions
633e96931 NAN: Option to offload NAN DE for USD into the driver
d98417218 RSNO: Check that RSNOE/RSNO2E/RSNXOE fit into RSN Override Link KDE
c03edfd5b Allow IE overriding to use maximum element length
d9bb64914 PASN: Add a function to configure noauth variable
8f21cdf9d PASN: Add support to reject PASN auth 1 based on user input
882bd2edd DPP: Do not restrict SAE password length on Enrollee
503e22025 DPP: Do not restrict SAE password length on Configurator
df8c5e22d RSNO: Always enable SNonce cookie and RSN Override elements validation
bbb55af8c RSNO: Skip validating RSN Override elements with MLO when RSN overriding not used
66d8ac8cc RSNO: Do not enforce SNonce cookie and RSN Selection match if RSNO not used
70b8f64fa RSNO: Update RSN overriding capability indication to the driver
5fd3d05a4 More detailed documentation for QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES
fd72d395d QCA vendor interface for indicating supplicant support for RSN overriding
88150522c Use QCA_WLAN_VENDOR_FEATURE_RSN_OVERRIDE_STA only for indicating driver support
8c9b9ccb4 AP MLD: Fix PN/IPN/BIPN for group rekeying
7275b6514 AP MLD: Fix ML STA wpa_group update during rekey
19e12d5e2 Fix GKeyDoneStations tracking for VLAN
43943ea5b nl80211: Add AP_VLAN interface to bridge after interface is up
7e7e43d6b AP MLD: Add links to bridge FDB for FT roaming
015f6a5a0 nl80211: NULL pointer check for link before use
3e2758b19 hostapd: Avoid channel selection across underlying hardware index
15bf093b5 hostapd: Fetch multiple radios information from the driver
c43e1e5a5 Sync with wireless-next.git include/uapi/linux/nl80211.h
c3beaf6b8 nl80211: MLD: Fix is_shared_drv ops logic when num links is one
3e420372e nl80211: Remove unused function argument from is_drv_shared() ops
c6ff28cb6 AP MLD: Handle garbage pointer after MLD interface is deleted
e1bf37022 nl80211: MLO: Process stop AP event on link basis
f519f472e nl80211: Make nl80211_remove_link() non-static
2d290f196 AP MLD: Handle driver events for interface enable/disable
e9984e3db hostapd: Refactor interface enable/disable into separate helper functions
8324947a6 RSNO: Add debug prints for RSN override elements in EAPOL frames
abd7f4795 RSNO: Fix storing RSNE/RSNXE variants to wpa_sm from association event
72ac0ee02 WNM: Extend workaround for broken AP operating class behavior
e33a55d31 nl80211: Sanitize link ID in mlme_event_ch_switch() for AP interface
de2ee083e nl80211: Add ifname and link ID debug prints in mlme_event_ch_switch()
bd8a1f5ff hostapd: Enable HE when EHT is set for channel switch
c6faa8936 AP MLD: Use the cached per STA profile instead of forming a new one
74db2b744 AP MLD: Handle Vendor Specific element inheritance in per STA profile
023d70d6c AP MLD: Add non-inheritance support for per STA profile reporting
b5359d01e AP MLD: Intersect per STA profile with the reporting BSS
abe990afb AP MLD: Ignore elements which are not meant to be included in per STA profile
2042cae9b AP MLD: Generate and keep per STA profiles for each link
8f07e9699 Move mld_link_info structure to hostapd.h header file
5cb6747f9 Add support to switch channel when CAC is in progress
b7f08c28c WNM: Fix potential NULL pointer dereference during assoc response handling
c7e704bdf hostapd: Add Bandwidth Indication subelement support for channel switch
c9d0c6fd7 hostapd: Refactor Channel Switch Wrapper element generation
b592c1586 nl80211: Handle nl80211_cqm_event per BSS
89c31feb3 Relocate the declaration of the hostapd_find_by_sta() function to top
83c4adcda hostapd: Add Max Channel Switch Time element support
9f334fe68 Share usec-to/from-TU conversion macros in a general location
69deac87f AP MLD: Ensure successful addition of link item into list
ca58be3da SAE: Add group 20 in default groups when AP started with SAE-EXT-KEY
666d695bb nl80211: Fix simultaneous scanning failure in case of MLO
fd55dfe16 nl80211: Fix scan request and its related events handling with MLO
23456e480 Avoid sending DEAUTH or DISASSOC packet when using flag tx=0
619ff3d2e build: Add simple compile_commands.json generation
d42cfaa39 Move wpas_trigger_6ghz_scan() up in the file
a66cb0993 Trigger a 6 GHz scan if RNR contains matching short SSID
acd9332c3 Fix success check for triggering 6 GHz scan
d40788a5c P2P: Use specified frequency for group client in P2P_GROUP_ADD command
9c0a6d64d dbus: Emit ScanInProgress6GHz property
b53d7a6a8 Add non-PSC channels to 6 GHz scan request
9e50c12b3 WNM: Scan for BSSID if there are forbidden neighbors
54b25b7c1 WNM: Always parse candidate list
d9d862787 WNM: Consolidate the scanning paths for BTM requests
3b6abe358 WNM: Reject requests with an invalid dialog token
f4a9cb96d MBO: Always accept BTM request with disassociation imminent bit set
adc6ca34a WNM: Move neighbor report test into wnm_is_bss_excluded()
a83231280 WNM: Swap logic in wnm_is_bss_excluded() to allow more checks
582b5eff4 WNM: Remove unused age parameter for neighbor comparison
4bbe004e0 WNM: Split candidate list parsing into a separate function
b791d1f34 WNM: Use os_relatime_add_ms() helper
da1a86afc WNM: Rename wnm_dissoc_timer
ebd18f1ad WNM: Rename wnm_dissoc_addr
93eb3b83c WNM: Store whether disassociation address is an MLD MAC address
63ac001ed WNM: Only trigger selection logic for own scans
bb96540ef Add QCA vendor attribute to skip recently scanned channels
bc43e75b2 MLD STA: Fix destination address for EAPOL frames
69d18ab9f bgscan: Add OWE transition mode SSID to network scan
56e8f8bf3 OWE: Enable roaming between OWE APs
ddfed3f08 OWE: Reduce code duplication in OWE element parsing
1e5416051 hostapd: Fix BSS parameters change count on link removal
21c3a7494 Add Link ID attribute for external ACS vendor command
594296595 Add link ID attribute to ADD_STA_NODE QCA vendor command for AP MLD
e1ab680c9 Add QCA vendor subcommand to request audio transport switch
7e0e69cfe SAE: Send external auth status after sending Authentication frame
be6e4279f RSNO: Verify all RSNE/RSNXE variants in multi-link cases
521374b97 RSNO: Include all RSNE/RSNXE variants in EAPOL-Key message 3/4
6f522baa1 RSNO: Use SNonce cookie to indicate support for RSN overriding
62ca121f9 RSNO: Use the RSN Selection element to indicate which variant was used
524c45215 RSNO: Remove unused override element generation
13648dde9 FILS: Check for potential NULL return
376adfea8 RSNO: Protect wpa_ie_buf3 from reuse explicitly
4adf234cd RSNO: Remove override elements from EAPOL-Key msg 3/4
296104d35 Testing functionality to allow EAPOL-Key Reserved field to be set
2e4c612dd Allow RSNE/RSNXE/RSNOE/RSNO2E/RSNXOE to be replace for testing
bb61f6cb9 RSNO: Support over two octets of RSNXOE capabilities
8b2ddfdbb RSNO: Allow RSNXE to be omitted
Change-Id: Id01978ca4556c871937ebcee51493166a7d595ab
Signed-off-by: Sunil Ravi <sunilravi@google.com>
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index dced2c4..f97f5ad 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -11,7 +11,7 @@
* Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
* Copyright 2008 Colin McCabe <colin@cozybit.com>
* Copyright 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018-2023 Intel Corporation
+ * Copyright (C) 2018-2024 Intel Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -72,7 +72,7 @@
* For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
* and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
* - a setup station entry is added, not yet authorized, without any rate
- * or capability information, this just exists to avoid race conditions
+ * or capability information; this just exists to avoid race conditions
* - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
* to add rate and capability information to the station and at the same
* time mark it authorized.
@@ -87,7 +87,7 @@
* DOC: Frame transmission/registration support
*
* Frame transmission and registration support exists to allow userspace
- * management entities such as wpa_supplicant react to management frames
+ * management entities such as wpa_supplicant to react to management frames
* that are not being handled by the kernel. This includes, for example,
* certain classes of action frames that cannot be handled in the kernel
* for various reasons.
@@ -113,7 +113,7 @@
*
* Frame transmission allows userspace to send for example the required
* responses to action frames. It is subject to some sanity checking,
- * but many frames can be transmitted. When a frame was transmitted, its
+ * but many frames can be transmitted. When a frame is transmitted, its
* status is indicated to the sending socket.
*
* For more technical details, see the corresponding command descriptions
@@ -123,7 +123,7 @@
/**
* DOC: Virtual interface / concurrency capabilities
*
- * Some devices are able to operate with virtual MACs, they can have
+ * Some devices are able to operate with virtual MACs; they can have
* more than one virtual interface. The capability handling for this
* is a bit complex though, as there may be a number of restrictions
* on the types of concurrency that are supported.
@@ -135,7 +135,7 @@
* Once concurrency is desired, more attributes must be observed:
* To start with, since some interface types are purely managed in
* software, like the AP-VLAN type in mac80211 for example, there's
- * an additional list of these, they can be added at any time and
+ * an additional list of these; they can be added at any time and
* are only restricted by some semantic restrictions (e.g. AP-VLAN
* cannot be added without a corresponding AP interface). This list
* is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
@@ -164,7 +164,7 @@
* Packet coalesce feature helps to reduce number of received interrupts
* to host by buffering these packets in firmware/hardware for some
* predefined time. Received interrupt will be generated when one of the
- * following events occur.
+ * following events occurs.
* a) Expiration of hardware timer whose expiration time is set to maximum
* coalescing delay of matching coalesce rule.
* b) Coalescing buffer in hardware reaches its limit.
@@ -174,7 +174,7 @@
* rule.
* a) Maximum coalescing delay
* b) List of packet patterns which needs to be matched
- * c) Condition for coalescence. pattern 'match' or 'no match'
+ * c) Condition for coalescence: pattern 'match' or 'no match'
* Multiple such rules can be created.
*/
@@ -213,7 +213,7 @@
/**
* DOC: FILS shared key authentication offload
*
- * FILS shared key authentication offload can be advertized by drivers by
+ * FILS shared key authentication offload can be advertised by drivers by
* setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
* FILS shared key authentication offload should be able to construct the
* authentication and association frames for FILS shared key authentication and
@@ -239,7 +239,7 @@
* The PMKSA can be maintained in userspace persistently so that it can be used
* later after reboots or wifi turn off/on also.
*
- * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
+ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertised by a FILS
* capable AP supporting PMK caching. It specifies the scope within which the
* PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
* %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
@@ -290,12 +290,12 @@
* If the configuration needs to be applied for specific peer then the MAC
* address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
* configuration will be applied for all the connected peers in the vif except
- * any peers that have peer specific configuration for the TID by default; if
- * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values
+ * any peers that have peer-specific configuration for the TID by default; if
+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer-specific values
* will be overwritten.
*
- * All this configuration is valid only for STA's current connection
- * i.e. the configuration will be reset to default when the STA connects back
+ * All this configuration is valid only for STA's current connection,
+ * i.e., the configuration will be reset to default when the STA connects back
* after disconnection/roaming, and this configuration will be cleared when
* the interface goes down.
*/
@@ -413,8 +413,8 @@
* are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
* do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
* %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
- * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
- * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+ * %NL80211_ATTR_CIPHER_SUITE_GROUP, %NL80211_ATTR_WPA_VERSIONS,
* %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
* %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
* %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
@@ -438,23 +438,19 @@
* %NL80211_ATTR_REASON_CODE can optionally be used to specify which type
* of disconnection indication should be sent to the station
* (Deauthentication or Disassociation frame and reason code for that
- * frame).
+ * frame). %NL80211_ATTR_MLO_LINK_ID can be used optionally to remove
+ * stations connected and using at least that link as one of its links.
*
* @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
- * destination %NL80211_ATTR_MAC on the interface identified by
- * %NL80211_ATTR_IFINDEX.
+ * destination %NL80211_ATTR_MAC on the interface identified by
+ * %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
- * destination %NL80211_ATTR_MAC on the interface identified by
- * %NL80211_ATTR_IFINDEX.
+ * destination %NL80211_ATTR_MAC on the interface identified by
+ * %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
* %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
* @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
* %NL80211_ATTR_MAC.
- * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
- * interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
- * or, if no MAC address given, all mesh paths, on the interface identified
- * by %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
* %NL80211_ATTR_IFINDEX.
*
@@ -475,15 +471,15 @@
* after being queried by the kernel. CRDA replies by sending a regulatory
* domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
* current alpha2 if it found a match. It also provides
- * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
- * regulatory rule is a nested set of attributes given by
- * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
- * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
- * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
- * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+ * regulatory rule is a nested set of attributes given by
+ * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+ * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+ * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+ * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
* @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
- * to the specified ISO/IEC 3166-1 alpha2 country code. The core will
- * store this as a valid request and then query userspace for it.
+ * to the specified ISO/IEC 3166-1 alpha2 country code. The core will
+ * store this as a valid request and then query userspace for it.
*
* @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
* interface identified by %NL80211_ATTR_IFINDEX
@@ -521,7 +517,7 @@
* %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
* not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
* scheduled scan will run in an infinite loop with the specified interval.
- * These attributes are mutually exculsive,
+ * These attributes are mutually exclusive,
* i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
* NL80211_ATTR_SCHED_SCAN_PLANS is defined.
* If for some reason scheduled scan is aborted by the driver, all scan
@@ -552,7 +548,7 @@
* %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
* is brought down while a scheduled scan was running.
*
- * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
+ * @NL80211_CMD_GET_SURVEY: get survey results, e.g. channel occupation
* or noise level
* @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
* NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
@@ -563,40 +559,41 @@
* using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
* %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
* authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
- * advertized by a FILS capable AP identifying the scope of PMKSA in an
+ * advertised by a FILS capable AP identifying the scope of PMKSA in an
* ESS.
* @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
* (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
* %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
- * authentication.
+ * authentication. Additionally in case of SAE offload and OWE offloads
+ * PMKSA entry can be deleted using %NL80211_ATTR_SSID.
* @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
*
* @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
- * has been changed and provides details of the request information
- * that caused the change such as who initiated the regulatory request
- * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
- * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
- * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
- * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
- * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
- * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
- * to (%NL80211_ATTR_REG_ALPHA2).
+ * has been changed and provides details of the request information
+ * that caused the change such as who initiated the regulatory request
+ * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
+ * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
+ * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
+ * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
+ * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
+ * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
+ * to (%NL80211_ATTR_REG_ALPHA2).
* @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
- * has been found while world roaming thus enabling active scan or
- * any mode of operation that initiates TX (beacons) on a channel
- * where we would not have been able to do either before. As an example
- * if you are world roaming (regulatory domain set to world or if your
- * driver is using a custom world roaming regulatory domain) and while
- * doing a passive scan on the 5 GHz band you find an AP there (if not
- * on a DFS channel) you will now be able to actively scan for that AP
- * or use AP mode on your card on that same channel. Note that this will
- * never be used for channels 1-11 on the 2 GHz band as they are always
- * enabled world wide. This beacon hint is only sent if your device had
- * either disabled active scanning or beaconing on a channel. We send to
- * userspace the wiphy on which we removed a restriction from
- * (%NL80211_ATTR_WIPHY) and the channel on which this occurred
- * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
- * the beacon hint was processed.
+ * has been found while world roaming thus enabling active scan or
+ * any mode of operation that initiates TX (beacons) on a channel
+ * where we would not have been able to do either before. As an example
+ * if you are world roaming (regulatory domain set to world or if your
+ * driver is using a custom world roaming regulatory domain) and while
+ * doing a passive scan on the 5 GHz band you find an AP there (if not
+ * on a DFS channel) you will now be able to actively scan for that AP
+ * or use AP mode on your card on that same channel. Note that this will
+ * never be used for channels 1-11 on the 2 GHz band as they are always
+ * enabled world wide. This beacon hint is only sent if your device had
+ * either disabled active scanning or beaconing on a channel. We send to
+ * userspace the wiphy on which we removed a restriction from
+ * (%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ * the beacon hint was processed.
*
* @NL80211_CMD_AUTHENTICATE: authentication request and notification.
* This command is used both as a command (request to authenticate) and
@@ -607,7 +604,7 @@
* BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
* the SSID (mainly for association, but is included in authentication
* request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
- * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequency of the
* channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
* authentication type. %NL80211_ATTR_IE is used to define IEs
* (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
@@ -816,7 +813,7 @@
* reached.
* @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
* and the attributes determining channel width) the given interface
- * (identifed by %NL80211_ATTR_IFINDEX) shall operate on.
+ * (identified by %NL80211_ATTR_IFINDEX) shall operate on.
* In case multiple channels are supported by the device, the mechanism
* with which it switches channels is implementation-defined.
* When a monitor interface is given, it can only switch channel while
@@ -888,7 +885,7 @@
* inform userspace of the new replay counter.
*
* @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
- * of PMKSA caching dandidates.
+ * of PMKSA caching candidates.
*
* @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
* In addition, this can be used as an event to request userspace to take
@@ -924,7 +921,7 @@
*
* @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
* by sending a null data frame to it and reporting when the frame is
- * acknowleged. This is used to allow timing out inactive clients. Uses
+ * acknowledged. This is used to allow timing out inactive clients. Uses
* %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
* direct reply with an %NL80211_ATTR_COOKIE that is later used to match
* up the event with the request. The event includes the same data and
@@ -1118,7 +1115,7 @@
* current configuration is not changed. If it is present but
* set to zero, the configuration is changed to don't-care
* (i.e. the device can decide what to do).
- * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
+ * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported.
* This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
* %NL80211_ATTR_COOKIE.
*
@@ -1135,11 +1132,15 @@
* @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
* configured PMK for the authenticator address identified by
* %NL80211_ATTR_MAC.
- * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was
- * completed successfully. Drivers that support 4 way handshake offload
- * should send this event after indicating 802.1X FT assocation with
- * %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT
- * should be indicated instead.
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates port is authorized and
+ * open for regular data traffic. For STA/P2P-client, this event is sent
+ * with AP MAC address and for AP/P2P-GO, the event carries the STA/P2P-
+ * client MAC address.
+ * Drivers that support 4 way handshake offload should send this event for
+ * STA/P2P-client after successful 4-way HS or after 802.1X FT following
+ * NL80211_CMD_CONNECT or NL80211_CMD_ROAM. Drivers using AP/P2P-GO 4-way
+ * handshake offload should send this event on successful completion of
+ * 4-way handshake with the peer (STA/P2P-client).
* @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
* and RX notification. This command is used both as a request to transmit
* a control port frame and as a notification that a control port frame
@@ -1323,6 +1324,11 @@
* Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide
* information about the removed STA MLD setup links.
*
+ * @NL80211_CMD_SET_TID_TO_LINK_MAPPING: Set the TID to Link Mapping for a
+ * non-AP MLD station. The %NL80211_ATTR_MLO_TTLM_DLINK and
+ * %NL80211_ATTR_MLO_TTLM_ULINK attributes are used to specify the
+ * TID to Link mapping for downlink/uplink traffic.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1578,6 +1584,8 @@
NL80211_CMD_LINKS_REMOVED,
+ NL80211_CMD_SET_TID_TO_LINK_MAPPING,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1702,21 +1710,21 @@
* (see &enum nl80211_plink_action).
* @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
* @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
- * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+ * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
* &enum nl80211_mpath_info.
*
* @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
* &enum nl80211_mntr_flags.
*
* @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
- * current regulatory domain should be set to or is already set to.
- * For example, 'CR', for Costa Rica. This attribute is used by the kernel
- * to query the CRDA to retrieve one regulatory domain. This attribute can
- * also be used by userspace to query the kernel for the currently set
- * regulatory domain. We chose an alpha2 as that is also used by the
- * IEEE-802.11 country information element to identify a country.
- * Users can also simply ask the wireless core to set regulatory domain
- * to a specific alpha2.
+ * current regulatory domain should be set to or is already set to.
+ * For example, 'CR', for Costa Rica. This attribute is used by the kernel
+ * to query the CRDA to retrieve one regulatory domain. This attribute can
+ * also be used by userspace to query the kernel for the currently set
+ * regulatory domain. We chose an alpha2 as that is also used by the
+ * IEEE-802.11 country information element to identify a country.
+ * Users can also simply ask the wireless core to set regulatory domain
+ * to a specific alpha2.
* @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
* rules.
*
@@ -1759,9 +1767,9 @@
* @NL80211_ATTR_BSS: scan result BSS
*
* @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
- * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
+ * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
* @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
- * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
+ * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
*
* @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
* an array of command numbers (i.e. a mapping index to command number)
@@ -1780,15 +1788,15 @@
* a u32
*
* @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
- * due to considerations from a beacon hint. This attribute reflects
- * the state of the channel _before_ the beacon hint processing. This
- * attributes consists of a nested attribute containing
- * NL80211_FREQUENCY_ATTR_*
+ * due to considerations from a beacon hint. This attribute reflects
+ * the state of the channel _before_ the beacon hint processing. This
+ * attributes consists of a nested attribute containing
+ * NL80211_FREQUENCY_ATTR_*
* @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
- * due to considerations from a beacon hint. This attribute reflects
- * the state of the channel _after_ the beacon hint processing. This
- * attributes consists of a nested attribute containing
- * NL80211_FREQUENCY_ATTR_*
+ * due to considerations from a beacon hint. This attribute reflects
+ * the state of the channel _after_ the beacon hint processing. This
+ * attributes consists of a nested attribute containing
+ * NL80211_FREQUENCY_ATTR_*
*
* @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
* cipher suites
@@ -1835,7 +1843,7 @@
* using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is
* to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
* flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
- * frames are not forwared over the control port.
+ * frames are not forwarded over the control port.
*
* @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
* We recommend using nested, driver-specific attributes within this.
@@ -1849,12 +1857,6 @@
* that protected APs should be used. This is also used with NEW_BEACON to
* indicate that the BSS is to use protection.
*
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
- * to indicate which unicast key ciphers will be used with the connection
- * (an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- * indicate which group key cipher will be used with the connection (a
- * u32).
* @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
* indicate which WPA version(s) the AP we want to associate with is using
* (a u32 with flags from &enum nl80211_wpa_versions).
@@ -1885,6 +1887,7 @@
* with %NL80211_KEY_* sub-attributes
*
* @NL80211_ATTR_PID: Process ID of a network namespace.
+ * @NL80211_ATTR_NETNS_FD: File descriptor of a network namespace.
*
* @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
* dumps. This number increases whenever the object list being
@@ -1939,6 +1942,7 @@
*
* @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
* acknowledged by the recipient.
+ * @NL80211_ATTR_ACK_SIGNAL: Station's ack signal strength (s32)
*
* @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
*
@@ -1972,10 +1976,10 @@
* bit. Depending on which antennas are selected in the bitmap, 802.11n
* drivers can derive which chainmasks to use (if all antennas belonging to
* a particular chain are disabled this chain should be disabled) and if
- * a chain has diversity antennas wether diversity should be used or not.
+ * a chain has diversity antennas whether diversity should be used or not.
* HT capabilities (STBC, TX Beamforming, Antenna selection) can be
* derived from the available chains after applying the antenna mask.
- * Non-802.11n drivers can derive wether to use diversity or not.
+ * Non-802.11n drivers can derive whether to use diversity or not.
* Drivers may reject configurations or RX/TX mask combinations they cannot
* support by returning -EINVAL.
*
@@ -2048,6 +2052,10 @@
* @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
* interface combinations. In each nested item, it contains attributes
* defined in &enum nl80211_if_combination_attrs.
+ * If the wiphy uses multiple radios (@NL80211_ATTR_WIPHY_RADIOS is set),
+ * this attribute contains the interface combinations of the first radio.
+ * See @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS for the global wiphy
+ * combinations for the sum of all radios.
* @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
* %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
* are managed in software: interfaces of these types aren't subject to
@@ -2136,6 +2144,9 @@
* @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
* this feature during association. This is a flag attribute.
* Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_EHT: Force EHT capable interfaces to disable
+ * this feature during association. This is a flag attribute.
+ * Currently only supported in mac80211 drivers.
* @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
* ATTR_HT_CAPABILITY to which attention should be paid.
* Currently, only mac80211 NICs support this feature.
@@ -2145,6 +2156,12 @@
* All values are treated as suggestions and may be ignored
* by the driver as required. The actual values may be seen in
* the station debugfs ht_caps file.
+ * @NL80211_ATTR_VHT_CAPABILITY_MASK: Specify which bits of the
+ * ATTR_VHT_CAPABILITY to which attention should be paid.
+ * Currently, only mac80211 NICs support this feature.
+ * All values are treated as suggestions and may be ignored
+ * by the driver as required. The actual values may be seen in
+ * the station debugfs vht_caps file.
*
* @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
* abides to when initiating radiation on DFS channels. A country maps
@@ -2403,7 +2420,7 @@
* scheduled scan is started. Or the delay before a WoWLAN
* net-detect scan is started, counting from the moment the
* system is suspended. This value is a u32, in seconds.
-
+ *
* @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
* is operating in an indoor environment.
*
@@ -2545,7 +2562,7 @@
* from successful FILS authentication and is used with
* %NL80211_CMD_CONNECT.
*
- * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
+ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertised by a FILS AP
* identifying the scope of PMKSAs. This is used with
* @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
*
@@ -2826,6 +2843,31 @@
* @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is
* disabled.
*
+ * @NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA: Include BSS usage data, i.e.
+ * include BSSes that can only be used in restricted scenarios and/or
+ * cannot be used at all.
+ *
+ * @NL80211_ATTR_MLO_TTLM_DLINK: Binary attribute specifying the downlink TID to
+ * link mapping. The length is 8 * sizeof(u16). For each TID the link
+ * mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
+ * in Draft P802.11be_D4.0.
+ * @NL80211_ATTR_MLO_TTLM_ULINK: Binary attribute specifying the uplink TID to
+ * link mapping. The length is 8 * sizeof(u16). For each TID the link
+ * mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
+ * in Draft P802.11be_D4.0.
+ *
+ * @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with
+ * %NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs
+ * are used on this connection
+ *
+ * @NL80211_ATTR_WIPHY_RADIOS: Nested attribute describing physical radios
+ * belonging to this wiphy. See &enum nl80211_wiphy_radio_attrs.
+ *
+ * @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS: Nested attribute listing the
+ * supported interface combinations for all radios combined. In each
+ * nested item, it contains attributes defined in
+ * &enum nl80211_if_combination_attrs.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3364,6 +3406,16 @@
NL80211_ATTR_MLO_LINK_DISABLED,
+ NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA,
+
+ NL80211_ATTR_MLO_TTLM_DLINK,
+ NL80211_ATTR_MLO_TTLM_ULINK,
+
+ NL80211_ATTR_ASSOC_SPP_AMSDU,
+
+ NL80211_ATTR_WIPHY_RADIOS,
+ NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -3504,6 +3556,7 @@
* @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
* that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
* previously added station into associated state
+ * @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs
* @NL80211_STA_FLAG_MAX: highest station flag number currently defined
* @__NL80211_STA_FLAG_AFTER_LAST: internal use
*/
@@ -3516,6 +3569,7 @@
NL80211_STA_FLAG_AUTHENTICATED,
NL80211_STA_FLAG_TDLS_PEER,
NL80211_STA_FLAG_ASSOCIATED,
+ NL80211_STA_FLAG_SPP_AMSDU,
/* keep last */
__NL80211_STA_FLAG_AFTER_LAST,
@@ -3526,7 +3580,7 @@
* enum nl80211_sta_p2p_ps_status - station support of P2P PS
*
* @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
- * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
+ * @NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
* @NUM_NL80211_P2P_PS_STATUS: number of values
*/
enum nl80211_sta_p2p_ps_status {
@@ -3564,9 +3618,9 @@
/**
* enum nl80211_he_ltf - HE long training field
- * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec
- * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec
- * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec
+ * @NL80211_RATE_INFO_HE_1XLTF: 3.2 usec
+ * @NL80211_RATE_INFO_HE_2XLTF: 6.4 usec
+ * @NL80211_RATE_INFO_HE_4XLTF: 12.8 usec
*/
enum nl80211_he_ltf {
NL80211_RATE_INFO_HE_1XLTF,
@@ -3681,7 +3735,7 @@
* @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
* (u8, see &enum nl80211_he_gi)
* @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
- * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
+ * @NL80211_RATE_INFO_HE_RU_ALLOC: HE RU allocation, if not present then
* non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
* @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate
* @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15)
@@ -3784,7 +3838,7 @@
* (u64, to this station)
* @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
* @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * containing info as possible, see &enum nl80211_rate_info
+ * containing info as possible, see &enum nl80211_rate_info
* @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
* (u32, from this station)
* @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
@@ -3813,8 +3867,8 @@
* Contains a nested array of signal strength attributes (u8, dBm)
* @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
* Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
- * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
- * 802.11 header (u32, kbps)
+ * @NL80211_STA_INFO_EXPECTED_THROUGHPUT: expected throughput considering also
+ * the 802.11 header (u32, kbps)
* @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
* (u64)
* @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
@@ -4000,7 +4054,7 @@
* @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
* @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
* @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
- * &enum nl80211_mpath_flags;
+ * &enum nl80211_mpath_flags;
* @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
* @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
* @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination
@@ -4140,7 +4194,7 @@
* @NL80211_WMMR_CW_MAX: Maximum contention window slot.
* @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
* @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
- * @nl80211_WMMR_MAX: highest possible wmm rule.
+ * @NL80211_WMMR_MAX: highest possible wmm rule.
* @__NL80211_WMMR_LAST: Internal use.
*/
enum nl80211_wmm_rule {
@@ -4162,15 +4216,16 @@
* @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
* regulatory domain.
* @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
- * are permitted on this channel, this includes sending probe
- * requests, or modes of operation that require beaconing.
+ * are permitted on this channel, this includes sending probe
+ * requests, or modes of operation that require beaconing.
+ * @__NL80211_FREQUENCY_ATTR_NO_IBSS: obsolete, same as _NO_IR
* @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
* on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
* (100 * dBm).
* @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
* (enum nl80211_dfs_state)
- * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
+ * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in milliseconds for how long
* this channel is in this DFS state.
* @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
* channel as the control channel
@@ -4226,6 +4281,19 @@
* in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that
* is allowed on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_DFS_CONCURRENT: Operation on this channel is
+ * allowed for peer-to-peer or adhoc communication under the control
+ * of a DFS master which operates on the same channel (FCC-594280 D01
+ * Section B.3). Should be used together with %NL80211_RRF_DFS only.
+ * @NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP
+ * not allowed using this channel
+ * @NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP
+ * not allowed using this channel
+ * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor
+ * mode despite other (regulatory) restrictions, even if the channel is
+ * otherwise completely disabled.
+ * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a
+ * very low power (VLP) AP, despite being NO_IR.
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
* currently defined
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4265,6 +4333,11 @@
NL80211_FREQUENCY_ATTR_NO_320MHZ,
NL80211_FREQUENCY_ATTR_NO_EHT,
NL80211_FREQUENCY_ATTR_PSD,
+ NL80211_FREQUENCY_ATTR_DFS_CONCURRENT,
+ NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT,
+ NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT,
+ NL80211_FREQUENCY_ATTR_CAN_MONITOR,
+ NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP,
/* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4277,6 +4350,10 @@
#define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR
#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
NL80211_FREQUENCY_ATTR_IR_CONCURRENT
+#define NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT \
+ NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT
+#define NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT \
+ NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT
/**
* enum nl80211_bitrate_attr - bitrate attributes
@@ -4299,16 +4376,16 @@
};
/**
- * enum nl80211_initiator - Indicates the initiator of a reg domain request
+ * enum nl80211_reg_initiator - Indicates the initiator of a reg domain request
* @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
- * regulatory domain.
+ * regulatory domain.
* @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
- * regulatory domain.
+ * regulatory domain.
* @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
- * wireless core it thinks its knows the regulatory domain we should be in.
+ * wireless core it thinks its knows the regulatory domain we should be in.
* @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
- * 802.11 country information element with regulatory information it
- * thinks we should consider. cfg80211 only processes the country
+ * 802.11 country information element with regulatory information it
+ * thinks we should consider. cfg80211 only processes the country
* code from the IE, and relies on the regulatory domain information
* structure passed by userspace (CRDA) from our wireless-regdb.
* If a channel is enabled but the country code indicates it should
@@ -4327,11 +4404,11 @@
* to a specific country. When this is set you can count on the
* ISO / IEC 3166 alpha2 country code being valid.
* @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
- * domain.
+ * domain.
* @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
- * driver specific world regulatory domain. These do not apply system-wide
- * and are only applicable to the individual devices which have requested
- * them to be applied.
+ * driver specific world regulatory domain. These do not apply system-wide
+ * and are only applicable to the individual devices which have requested
+ * them to be applied.
* @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
* of an intersection between two regulatory domains -- the previously
* set regulatory domain on the system and the last accepted regulatory
@@ -4348,21 +4425,21 @@
* enum nl80211_reg_rule_attr - regulatory rule attributes
* @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
- * considerations for a given frequency range. These are the
- * &enum nl80211_reg_rule_flags.
+ * considerations for a given frequency range. These are the
+ * &enum nl80211_reg_rule_flags.
* @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
- * rule in KHz. This is not a center of frequency but an actual regulatory
- * band edge.
+ * rule in KHz. This is not a center of frequency but an actual regulatory
+ * band edge.
* @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
- * in KHz. This is not a center a frequency but an actual regulatory
- * band edge.
+ * in KHz. This is not a center a frequency but an actual regulatory
+ * band edge.
* @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
* frequency range, in KHz.
* @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
- * for a given frequency range. The value is in mBi (100 * dBi).
- * If you don't have one then don't send this.
+ * for a given frequency range. The value is in mBi (100 * dBi).
+ * If you don't have one then don't send this.
* @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
- * a given frequency range. The value is in mBm (100 * dBm).
+ * a given frequency range. The value is in mBm (100 * dBm).
* @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
* If not present or 0 default CAC time will be used.
* @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm).
@@ -4414,14 +4491,7 @@
* value as specified by &struct nl80211_bss_select_rssi_adjust.
* @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
* (this cannot be used together with SSID).
- * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
- * band specific minimum rssi thresholds for the bands defined in
- * enum nl80211_band. The minimum rssi threshold value(s32) specific to a
- * band shall be encapsulated in attribute with type value equals to one
- * of the NL80211_BAND_* defined in enum nl80211_band. For example, the
- * minimum rssi threshold value for 2.4GHZ band shall be encapsulated
- * within an attribute of type NL80211_BAND_2GHZ. And one or more of such
- * attributes will be nested within this attribute.
+ * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Obsolete
* @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
* attribute number currently defined
* @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -4434,7 +4504,7 @@
NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
- NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI,
+ NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* obsolete */
/* keep last */
__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -4456,8 +4526,9 @@
* @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
* @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
* @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
- * this includes probe requests or modes of operation that require
- * beaconing.
+ * this includes probe requests or modes of operation that require
+ * beaconing.
+ * @__NL80211_RRF_NO_IBSS: obsolete, same as NO_IR
* @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
* base on contiguous rules and wider channels will be allowed to cross
* multiple contiguous/overlapping frequency ranges.
@@ -4470,6 +4541,14 @@
* @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
* @NL80211_RRF_NO_EHT: EHT operation not allowed
* @NL80211_RRF_PSD: Ruleset has power spectral density value
+ * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for
+ * peer-to-peer or adhoc communication under the control of a DFS master
+ * which operates on the same channel (FCC-594280 D01 Section B.3).
+ * Should be used together with %NL80211_RRF_DFS only.
+ * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed
+ * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed
+ * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted
+ * despite NO_IR configuration.
*/
enum nl80211_reg_rule_flags {
NL80211_RRF_NO_OFDM = 1<<0,
@@ -4491,6 +4570,10 @@
NL80211_RRF_NO_320MHZ = 1<<18,
NL80211_RRF_NO_EHT = 1<<19,
NL80211_RRF_PSD = 1<<20,
+ NL80211_RRF_DFS_CONCURRENT = 1<<21,
+ NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1<<22,
+ NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1<<23,
+ NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1<<24,
};
#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
@@ -4499,6 +4582,8 @@
#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\
NL80211_RRF_NO_HT40PLUS)
#define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT
+#define NL80211_RRF_NO_UHB_VLP_CLIENT NL80211_RRF_NO_6GHZ_VLP_CLIENT
+#define NL80211_RRF_NO_UHB_AFC_CLIENT NL80211_RRF_NO_6GHZ_AFC_CLIENT
/* For backport compatibility with older userspace */
#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
@@ -4645,8 +4730,8 @@
* alternate between Active and Doze states, but may not wake up
* for neighbor's beacons.
*
- * @__NL80211_MESH_POWER_AFTER_LAST - internal use
- * @NL80211_MESH_POWER_MAX - highest possible power save level
+ * @__NL80211_MESH_POWER_AFTER_LAST: internal use
+ * @NL80211_MESH_POWER_MAX: highest possible power save level
*/
enum nl80211_mesh_power_mode {
@@ -5028,6 +5113,36 @@
};
/**
+ * enum nl80211_bss_use_for - bitmap indicating possible BSS use
+ * @NL80211_BSS_USE_FOR_NORMAL: Use this BSS for normal "connection",
+ * including IBSS/MBSS depending on the type.
+ * @NL80211_BSS_USE_FOR_MLD_LINK: This BSS can be used as a link in an
+ * MLO connection. Note that for an MLO connection, all links including
+ * the assoc link must have this flag set, and the assoc link must
+ * additionally have %NL80211_BSS_USE_FOR_NORMAL set.
+ */
+enum nl80211_bss_use_for {
+ NL80211_BSS_USE_FOR_NORMAL = 1 << 0,
+ NL80211_BSS_USE_FOR_MLD_LINK = 1 << 1,
+};
+
+/**
+ * enum nl80211_bss_cannot_use_reasons - reason(s) connection to a
+ * BSS isn't possible
+ * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't
+ * supported by the device, and this BSS entry represents one.
+ * @NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH: STA is not supporting
+ * the AP power type (SP, VLP, AP) that the AP uses.
+ */
+enum nl80211_bss_cannot_use_reasons {
+ NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY = 1 << 0,
+ NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH = 1 << 1,
+};
+
+#define NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH \
+ NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH
+
+/**
* enum nl80211_bss - netlink attributes for a BSS
*
* @__NL80211_BSS_INVALID: invalid
@@ -5079,6 +5194,14 @@
* @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
* @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8).
* @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it.
+ * @NL80211_BSS_USE_FOR: u32 bitmap attribute indicating what the BSS can be
+ * used for, see &enum nl80211_bss_use_for.
+ * @NL80211_BSS_CANNOT_USE_REASONS: Indicates the reason that this BSS cannot
+ * be used for all or some of the possible uses by the device reporting it,
+ * even though its presence was detected.
+ * This is a u64 attribute containing a bitmap of values from
+ * &enum nl80211_cannot_use_reasons, note that the attribute may be missing
+ * if no reasons are specified.
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
@@ -5106,6 +5229,8 @@
NL80211_BSS_FREQUENCY_OFFSET,
NL80211_BSS_MLO_LINK_ID,
NL80211_BSS_MLD_ADDR,
+ NL80211_BSS_USE_FOR,
+ NL80211_BSS_CANNOT_USE_REASONS,
/* keep last */
__NL80211_BSS_AFTER_LAST,
@@ -5454,7 +5579,7 @@
* (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
* @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
* per peer instead.
- * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates
+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribute, if set indicates
* that the new configuration overrides all previous peer
* configurations, otherwise previous peer specific configurations
* should be left untouched.
@@ -5626,7 +5751,7 @@
* "TCP connection wakeup" for more details. This is a nested attribute
* containing the exact information for establishing and keeping alive
* the TCP connection.
- * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH: For wakeup reporting only, the
* wakeup packet was received on the TCP connection
* @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
* TCP connection was lost or failed to be established
@@ -5655,6 +5780,8 @@
* %NL80211_ATTR_SCAN_FREQUENCIES contains more than one
* frequency, it means that the match occurred in more than one
* channel.
+ * @NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC: For wakeup reporting only.
+ * Wake up happened due to unprotected deauth or disassoc frame in MFP.
* @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
* @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
*
@@ -5682,6 +5809,7 @@
NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
NL80211_WOWLAN_TRIG_NET_DETECT,
NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
+ NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC,
/* keep last */
NUM_NL80211_WOWLAN_TRIG,
@@ -5837,7 +5965,7 @@
/**
* enum nl80211_coalesce_condition - coalesce rule conditions
- * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns
+ * @NL80211_COALESCE_CONDITION_MATCH: coalesce Rx packets when patterns
* in a rule are matched.
* @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
* in a rule are not matched.
@@ -5936,7 +6064,7 @@
* enum nl80211_plink_state - state of a mesh peer link finite state machine
*
* @NL80211_PLINK_LISTEN: initial state, considered the implicit
- * state of non existent mesh peer links
+ * state of non-existent mesh peer links
* @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
* this mesh peer
* @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
@@ -5972,7 +6100,7 @@
* @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
* @NUM_NL80211_PLINK_ACTIONS: number of possible actions
*/
-enum plink_actions {
+enum nl80211_plink_action {
NL80211_PLINK_ACTION_NO_ACTION,
NL80211_PLINK_ACTION_OPEN,
NL80211_PLINK_ACTION_BLOCK,
@@ -6229,7 +6357,7 @@
* request to use RRM (see %NL80211_ATTR_USE_RRM) with
* %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
* the ASSOC_REQ_USE_RRM flag in the association request even if
- * NL80211_FEATURE_QUIET is not advertized.
+ * NL80211_FEATURE_QUIET is not advertised.
* @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
* sniffer which means that it can be configured to hear packets from
* certain groups which can be configured by the
@@ -6241,13 +6369,15 @@
* the BSS that the interface that requested the scan is connected to
* (if available).
* @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
- * time the last beacon/probe was received. The time is the TSF of the
- * BSS that the interface that requested the scan is connected to
- * (if available).
+ * time the last beacon/probe was received. For a non-MLO connection, the
+ * time is the TSF of the BSS that the interface that requested the scan is
+ * connected to (if available). For an MLO connection, the time is the TSF
+ * of the BSS corresponding with link ID specified in the scan request (if
+ * specified).
* @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
* channel dwell time.
* @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
- * configuration (AP/mesh), supporting a legacy (non HT/VHT) rate.
+ * configuration (AP/mesh), supporting a legacy (non-HT/VHT) rate.
* @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
* configuration (AP/mesh) with HT rates.
* @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
@@ -6297,6 +6427,7 @@
* receiving control port frames over nl80211 instead of the netdevice.
* @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
* (average) ACK signal strength reporting.
+ * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: Backward-compatible ID
* @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
* TXQs.
* @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
@@ -6321,8 +6452,7 @@
* @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
* (set/del PMKSA operations) in AP mode.
*
- * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
- * filtering of sched scan results using band specific RSSI thresholds.
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Obsolete
*
* @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
* to a station.
@@ -6426,6 +6556,16 @@
* @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE
* handling in AP mode.
*
+ * @NL80211_EXT_FEATURE_DFS_CONCURRENT: The device supports peer-to-peer or
+ * ad hoc operation on DFS channels under the control of a concurrent
+ * DFS master on the same channel as described in FCC-594280 D01
+ * (Section B.3). This, for example, allows P2P GO and P2P clients to
+ * operate on DFS channels as long as there's a concurrent BSS connection.
+ *
+ * @NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT: The driver has support for SPP
+ * (signaling and payload protected) A-MSDUs and this shall be advertised
+ * in the RSNXE.
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -6467,7 +6607,7 @@
NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
- NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
+ NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, /* obsolete */
NL80211_EXT_FEATURE_EXT_KEY_ID,
NL80211_EXT_FEATURE_STA_TX_PWR,
NL80211_EXT_FEATURE_SAE_OFFLOAD,
@@ -6499,6 +6639,8 @@
NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA,
NL80211_EXT_FEATURE_OWE_OFFLOAD,
NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,
+ NL80211_EXT_FEATURE_DFS_CONCURRENT,
+ NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -6583,7 +6725,7 @@
* request parameters IE in the probe request
* @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
* @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
- * rate of at least 5.5M. In case non OCE AP is discovered in the channel,
+ * rate of at least 5.5M. In case non-OCE AP is discovered in the channel,
* only the first probe req in the channel will be sent in high rate.
* @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
* tx deferral (dot11FILSProbeDelay shall be set to 15ms)
@@ -6619,7 +6761,7 @@
* received on the 2.4/5 GHz channels to actively scan only the 6GHz
* channels on which APs are expected to be found. Note that when not set,
* the scan logic would scan all 6GHz channels, but since transmission of
- * probe requests on non PSC channels is limited, it is highly likely that
+ * probe requests on non-PSC channels is limited, it is highly likely that
* these channels would passively be scanned. Also note that when the flag
* is set, in addition to the colocated APs, PSC channels would also be
* scanned if the user space has asked for it.
@@ -6669,6 +6811,8 @@
* @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
* @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
* turn on other antennas after CTS/RTS).
+ * @__NL80211_SMPS_AFTER_LAST: internal
+ * @NL80211_SMPS_MAX: highest used enumeration
*/
enum nl80211_smps_mode {
NL80211_SMPS_OFF,
@@ -6890,6 +7034,8 @@
* @NL80211_NAN_FUNC_PUBLISH: function is publish
* @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
* @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
+ * @__NL80211_NAN_FUNC_TYPE_AFTER_LAST: internal use
+ * @NL80211_NAN_FUNC_MAX_TYPE: internal use
*/
enum nl80211_nan_function_type {
NL80211_NAN_FUNC_PUBLISH,
@@ -6951,7 +7097,7 @@
* The instance ID for the follow up Service Discovery Frame. This is u8.
* @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
* is follow up. This is a u8.
- * The requestor instance ID for the follow up Service Discovery Frame.
+ * The requester instance ID for the follow up Service Discovery Frame.
* @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
* follow up Service Discovery Frame. This is a binary attribute.
* @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
@@ -7050,7 +7196,7 @@
};
/**
- * nl80211_external_auth_action - Action to perform with external
+ * enum nl80211_external_auth_action - Action to perform with external
* authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
* @NL80211_EXTERNAL_AUTH_START: Start the authentication.
* @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
@@ -7068,7 +7214,7 @@
* @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element
* (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10),
* i.e. starting with the measurement token
- * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element
+ * @NL80211_FTM_RESP_ATTR_CIVICLOC: The content of Measurement Report Element
* (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13),
* i.e. starting with the measurement token
* @__NL80211_FTM_RESP_ATTR_LAST: Internal
@@ -7341,7 +7487,7 @@
* @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
* trigger based ranging measurement is supported
* @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
- * if non trigger based ranging measurement is supported
+ * if non-trigger-based ranging measurement is supported
*
* @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
* @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
@@ -7395,7 +7541,7 @@
* if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
* %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
* ranging will be used.
- * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based
+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non-trigger-based
* ranging measurement (flag)
* This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
* mutually exclusive.
@@ -7473,7 +7619,7 @@
* @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames
* transmitted (u32, optional)
* @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames
- * that were acknowleged (u32, optional)
+ * that were acknowledged (u32, optional)
* @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the
* busy peer (u32, seconds)
* @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent
@@ -7711,6 +7857,7 @@
*
* @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
*
+ * @NUM_NL80211_SAR_TYPE: internal
*/
enum nl80211_sar_type {
NL80211_SAR_TYPE_POWER,
@@ -7724,6 +7871,8 @@
/**
* enum nl80211_sar_attrs - Attributes for SAR spec
*
+ * @__NL80211_SAR_ATTR_INVALID: Invalid
+ *
* @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
*
* @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
@@ -7755,6 +7904,8 @@
/**
* enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
*
+ * @__NL80211_SAR_ATTR_SPECS_INVALID: Invalid
+ *
* @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
* power limit value in units of 0.25 dBm if type is
* NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
@@ -7869,4 +8020,54 @@
NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1,
};
+/**
+ * enum nl80211_wiphy_radio_attrs - wiphy radio attributes
+ *
+ * @__NL80211_WIPHY_RADIO_ATTR_INVALID: Invalid
+ *
+ * @NL80211_WIPHY_RADIO_ATTR_INDEX: Index of this radio (u32)
+ * @NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE: Frequency range supported by this
+ * radio. Attribute may be present multiple times.
+ * @NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION: Supported interface
+ * combination for this radio. Attribute may be present multiple times
+ * and contains attributes defined in &enum nl80211_if_combination_attrs.
+ *
+ * @__NL80211_WIPHY_RADIO_ATTR_LAST: Internal
+ * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute
+ */
+enum nl80211_wiphy_radio_attrs {
+ __NL80211_WIPHY_RADIO_ATTR_INVALID,
+
+ NL80211_WIPHY_RADIO_ATTR_INDEX,
+ NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE,
+ NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION,
+
+ /* keep last */
+ __NL80211_WIPHY_RADIO_ATTR_LAST,
+ NL80211_WIPHY_RADIO_ATTR_MAX = __NL80211_WIPHY_RADIO_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_wiphy_radio_freq_range - wiphy radio frequency range
+ *
+ * @__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID: Invalid
+ *
+ * @NL80211_WIPHY_RADIO_FREQ_ATTR_START: Frequency range start (u32).
+ * The unit is kHz.
+ * @NL80211_WIPHY_RADIO_FREQ_ATTR_END: Frequency range end (u32).
+ * The unit is kHz.
+ *
+ * @__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST: Internal
+ * @NL80211_WIPHY_RADIO_FREQ_ATTR_MAX: Highest attribute
+ */
+enum nl80211_wiphy_radio_freq_range {
+ __NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID,
+
+ NL80211_WIPHY_RADIO_FREQ_ATTR_START,
+ NL80211_WIPHY_RADIO_FREQ_ATTR_END,
+
+ __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST,
+ NL80211_WIPHY_RADIO_FREQ_ATTR_MAX = __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST - 1,
+};
+
#endif /* __LINUX_NL80211_H */