[wpa_supplicant] Cumulative patch from commit 0c5ededed
Merge to enable randomized source MAC address for ANQP/GAS
messages. Addresses an issue with DPP when GAS MAC randomization
is enabled.
Enable GAS MAC randomization in HIDL.
Bug: 154393320
Test: Device boots up and connects to wifi networks, run traffic.
Test: Able to turn on/off softap, associate wifi STA, run traffic.
Test: Confirm ANQP messages are randomized from logs:
wpa_supplicant: GAS: Use a new random transmitter address ae:a2:5f:5e:65:11
Test: act.py -c ../WifiDppConfig.json -tc WifiDppTest
Test: Wi-Fi direct tests in CtsVerifier
Test: Regression test passed (Bug: 154769005)
0c5ededed DPP: Fix config exchange with gas_rand_mac_addr
60a2de568 EAP server: Convert Boolean to C99 bool
4d2ec436e DPP: Add driver operation for enabling/disabling listen mode
99cf89555 Include stdbool.h to allow C99 bool to be used
3e6383f31 DPP2: Silence compiler warning with no-CONFIG_DPP2 and OpenSSL 1.0.2
f23b70f16 Silence compiler warning in no-NEED_AP_MLME hostapd builds
011526874 nl80211: Move nl80211_init_connect_handle() to avoid forward declaration
2c70b7d0b Do not open l2_packet(EAPOL) for receive unnecessarily
7a880b129 l2_packet: Allow initialization without RX handling
95cbf4509 nl80211: Do not open EAPOL RX socket when using control port for RX (AP)
c3bb8865a Clean up l2_packet_get_own_addr() call
9d6334e81 Do not open l2_packet bridge workaround socket if control port is used
c1bc0dd80 nl80211: Disable EAPOL TX over control port in AP mode by default
12ea7dee3 nl80211: Use nl80211 control port for receiving EAPOL frames
8609aa5ba nl80211: Tie connect handle to bss init/destroy
b4a70018e nl80211: Handle control port frame in bss events
6f70fcd98 nl80211: Check ethertype for control port RX
932546ac2 nl80211: Add a separate driver capability for control port RX
bb9e3935d driver: Add second driver capability flags bitmap
6255a8ac1 WPS: Convert WPA/TKIP-only to WPA+WPA2 mixed mode credential
6b1c590eb Allow TKIP support to be removed from build
a6c689d35 FT: Testing override for RSNXE Used subfield in FTE (AP)
9b222b613 nl80211: Remove unnecessary inclusion of l2_packet.h
b2d8dc59f FT: Testing override for RSNXE Used subfield in FTE
5344af7d2 FT: Discard ReassocReq with mismatching RSNXE Used value
af0178c75 Add vendor attributes indicating number of spectral detectors
7a510a97b Add an attribute for secondary 80 MHz span of agile spectral scan
24a6bca70 PKCS#1: Debug dump invalid Signature EB
eac6eb702 X509: Use unique debug prints for unused bits entries
153333ef6 FT RRB: Remove confusing debug print about extra data
d867e1181 FT: Remove and re-add STA entry after FT protocol success with PMF
97beccc83 SAE: Fix build without DPP/OWE/ERP
c7a9a5745 P2P: Start group with user configured params after accepting invitation
512b6c02e DPP: Mandate mutual auth with NFC negotiated connection handover
872299f4b DPP2: Store netAccessKey in psk/sae credentials for reconfig
bf9f49396 OWE: Remove check for unexpected DH Parameter IE use with other AKMs
e4eb009d9 DPP2: Add Connector and C-sign-key in psk/sae credentials for reconfig
1dcfbab25 DPP2: Clear requirement for QR Code mutual authentication for chirping
Change-Id: Iecf7494c1be132e006dee9ec0a40283765bdddbb
diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index 032bbd8..bdd90d8 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -1838,7 +1838,7 @@
#define WPA_DRIVER_FLAGS_FTM_RESPONDER 0x0100000000000000ULL
/** Driver support 4-way handshake offload for WPA-Personal */
#define WPA_DRIVER_FLAGS_4WAY_HANDSHAKE_PSK 0x0200000000000000ULL
-/** Driver supports a separate control port for EAPOL frames */
+/** Driver supports a separate control port TX for EAPOL frames */
#define WPA_DRIVER_FLAGS_CONTROL_PORT 0x0400000000000000ULL
/** Driver supports VLAN offload */
#define WPA_DRIVER_FLAGS_VLAN_OFFLOAD 0x0800000000000000ULL
@@ -1852,6 +1852,10 @@
#define WPA_DRIVER_FLAGS_EXTENDED_KEY_ID 0x8000000000000000ULL
u64 flags;
+/** Driver supports a separate control port RX for EAPOL frames */
+#define WPA_DRIVER_FLAGS2_CONTROL_PORT_RX 0x0000000000000001ULL
+ u64 flags2;
+
#define FULL_AP_CLIENT_STATE_SUPP(drv_flags) \
(drv_flags & WPA_DRIVER_FLAGS_FULL_AP_CLIENT_STATE)
@@ -4420,6 +4424,17 @@
*/
int (*update_dh_ie)(void *priv, const u8 *peer_mac, u16 reason_code,
const u8 *ie, size_t ie_len);
+
+ /**
+ * dpp_listen - Notify driver about start/stop of DPP listen
+ * @priv: Private driver interface data
+ * @enable: Whether listen state is enabled (or disabled)
+ * Returns: 0 on success, -1 on failure
+ *
+ * This optional callback can be used to update RX frame filtering to
+ * explicitly allow reception of broadcast Public Action frames.
+ */
+ int (*dpp_listen)(void *priv, int enable);
};
/**
@@ -5921,6 +5936,7 @@
const struct wpa_driver_capa *capa);
/* Convert driver flag to string */
const char * driver_flag_to_string(u64 flag);
+const char * driver_flag2_to_string(u64 flag2);
/* NULL terminated array of linked in driver wrappers */
extern const struct wpa_driver_ops *const wpa_drivers[];
diff --git a/src/drivers/driver_common.c b/src/drivers/driver_common.c
index 63846db..23a6a42 100644
--- a/src/drivers/driver_common.c
+++ b/src/drivers/driver_common.c
@@ -321,3 +321,14 @@
return "UNKNOWN";
#undef DF2S
}
+
+
+const char * driver_flag2_to_string(u64 flag2)
+{
+#define DF2S(x) case WPA_DRIVER_FLAGS2_ ## x: return #x
+ switch (flag2) {
+ DF2S(CONTROL_PORT_RX);
+ }
+ return "UNKNOWN";
+#undef DF2S
+}
diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index 3b7c31c..75792f3 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -30,7 +30,6 @@
#include "common/ieee802_11_defs.h"
#include "common/ieee802_11_common.h"
#include "common/wpa_common.h"
-#include "l2_packet/l2_packet.h"
#include "netlink.h"
#include "linux_defines.h"
#include "linux_ioctl.h"
@@ -438,6 +437,52 @@
}
+/* Use this method to mark that it is necessary to own the connection/interface
+ * for this operation.
+ * handle may be set to NULL, to get the same behavior as send_and_recv_msgs().
+ * set_owner can be used to mark this socket for receiving control port frames.
+ */
+static int send_and_recv_msgs_owner(struct wpa_driver_nl80211_data *drv,
+ struct nl_msg *msg,
+ struct nl_sock *handle, int set_owner,
+ int (*valid_handler)(struct nl_msg *,
+ void *),
+ void *valid_data)
+{
+ /* Control port over nl80211 needs the flags and attributes below.
+ *
+ * The Linux kernel has initial checks for them (in nl80211.c) like:
+ * validate_pae_over_nl80211(...)
+ * or final checks like:
+ * dev->ieee80211_ptr->conn_owner_nlportid != info->snd_portid
+ *
+ * Final operations (e.g., disassociate) don't need to set these
+ * attributes, but they have to be performed on the socket, which has
+ * the connection owner property set in the kernel.
+ */
+ if ((drv->capa.flags2 & WPA_DRIVER_FLAGS2_CONTROL_PORT_RX) &&
+ handle && set_owner &&
+ (nla_put_flag(msg, NL80211_ATTR_CONTROL_PORT_OVER_NL80211) ||
+ nla_put_flag(msg, NL80211_ATTR_SOCKET_OWNER) ||
+ nla_put_u16(msg, NL80211_ATTR_CONTROL_PORT_ETHERTYPE, ETH_P_PAE) ||
+ nla_put_flag(msg, NL80211_ATTR_CONTROL_PORT_NO_PREAUTH)))
+ return -1;
+
+ return send_and_recv(drv->global, handle ? handle : drv->global->nl,
+ msg, valid_handler, valid_data);
+}
+
+
+struct nl_sock * get_connect_handle(struct i802_bss *bss)
+{
+ if ((bss->drv->capa.flags2 & WPA_DRIVER_FLAGS2_CONTROL_PORT_RX) ||
+ bss->use_nl_connect)
+ return bss->nl_connect;
+
+ return NULL;
+}
+
+
struct family_data {
const char *group;
int id;
@@ -1918,6 +1963,25 @@
}
+static int nl80211_init_connect_handle(struct i802_bss *bss)
+{
+ if (bss->nl_connect) {
+ wpa_printf(MSG_DEBUG,
+ "nl80211: Connect handle already created (nl_connect=%p)",
+ bss->nl_connect);
+ return -1;
+ }
+
+ bss->nl_connect = nl_create_handle(bss->nl_cb, "connect");
+ if (!bss->nl_connect)
+ return -1;
+ nl80211_register_eloop_read(&bss->nl_connect,
+ wpa_driver_nl80211_event_receive,
+ bss->nl_cb, 1);
+ return 0;
+}
+
+
static int nl80211_init_bss(struct i802_bss *bss)
{
bss->nl_cb = nl_cb_alloc(NL_CB_DEFAULT);
@@ -1929,6 +1993,8 @@
nl_cb_set(bss->nl_cb, NL_CB_VALID, NL_CB_CUSTOM,
process_bss_event, bss);
+ nl80211_init_connect_handle(bss);
+
return 0;
}
@@ -1937,6 +2003,9 @@
{
nl_cb_put(bss->nl_cb);
bss->nl_cb = NULL;
+
+ if (bss->nl_connect)
+ nl80211_destroy_eloop_handle(&bss->nl_connect, 1);
}
@@ -2160,25 +2229,6 @@
}
-static int nl80211_init_connect_handle(struct i802_bss *bss)
-{
- if (bss->nl_connect) {
- wpa_printf(MSG_DEBUG,
- "nl80211: Connect handle already created (nl_connect=%p)",
- bss->nl_connect);
- return -1;
- }
-
- bss->nl_connect = nl_create_handle(bss->nl_cb, "connect");
- if (!bss->nl_connect)
- return -1;
- nl80211_register_eloop_read(&bss->nl_connect,
- wpa_driver_nl80211_event_receive,
- bss->nl_cb, 1);
- return 0;
-}
-
-
static int nl80211_mgmt_subscribe_non_ap(struct i802_bss *bss)
{
struct wpa_driver_nl80211_data *drv = bss->drv;
@@ -2716,8 +2766,6 @@
if (drv->vendor_cmd_test_avail)
qca_vendor_test(drv);
- nl80211_init_connect_handle(bss);
-
return 0;
}
@@ -2830,9 +2878,6 @@
nl80211_del_p2pdev(bss);
}
- if (bss->nl_connect)
- nl80211_destroy_eloop_handle(&bss->nl_connect, 1);
-
nl80211_destroy_bss(drv->first_bss);
os_free(drv->filter_ssids);
@@ -3437,18 +3482,14 @@
return nl80211_leave_ibss(drv, 1);
}
if (!(drv->capa.flags & WPA_DRIVER_FLAGS_SME)) {
- struct nl_sock *nl_connect = NULL;
-
- if (bss->use_nl_connect)
- nl_connect = bss->nl_connect;
return wpa_driver_nl80211_disconnect(drv, reason_code,
- nl_connect);
+ get_connect_handle(bss));
}
wpa_printf(MSG_DEBUG, "%s(addr=" MACSTR " reason_code=%d)",
__func__, MAC2STR(addr), reason_code);
nl80211_mark_disconnected(drv);
ret = wpa_driver_nl80211_mlme(drv, addr, NL80211_CMD_DEAUTHENTICATE,
- reason_code, 0, NULL);
+ reason_code, 0, get_connect_handle(bss));
/*
* For locally generated deauthenticate, supplicant already generates a
* DEAUTH event, so ignore the event from NL80211.
@@ -4432,7 +4473,8 @@
}
#endif /* CONFIG_IEEE80211AX */
- ret = send_and_recv_msgs(drv, msg, NULL, NULL);
+ ret = send_and_recv_msgs_owner(drv, msg, get_connect_handle(bss), 1,
+ NULL, NULL);
if (ret) {
wpa_printf(MSG_DEBUG, "nl80211: Beacon set failed: %d (%s)",
ret, strerror(-ret));
@@ -5285,7 +5327,10 @@
int res;
int qos = flags & WPA_STA_WMM;
- if (drv->capa.flags & WPA_DRIVER_FLAGS_CONTROL_PORT)
+ /* For now, disable EAPOL TX over control port in AP mode by default
+ * since it does not provide TX status notifications. */
+ if (drv->control_port_ap &&
+ (drv->capa.flags & WPA_DRIVER_FLAGS_CONTROL_PORT))
return nl80211_tx_control_port(bss, addr, ETH_P_EAPOL,
data, data_len, !encrypt);
@@ -5452,7 +5497,9 @@
int ret;
msg = nl80211_drv_msg(drv, 0, NL80211_CMD_LEAVE_IBSS);
- ret = send_and_recv_msgs(drv, msg, NULL, NULL);
+ ret = send_and_recv_msgs_owner(drv, msg,
+ get_connect_handle(drv->first_bss), 1,
+ NULL, NULL);
if (ret) {
wpa_printf(MSG_DEBUG, "nl80211: Leave IBSS failed: ret=%d "
"(%s)", ret, strerror(-ret));
@@ -5584,7 +5631,9 @@
if (ret < 0)
goto fail;
- ret = send_and_recv_msgs(drv, msg, NULL, NULL);
+ ret = send_and_recv_msgs_owner(drv, msg,
+ get_connect_handle(drv->first_bss), 1,
+ NULL, NULL);
msg = NULL;
if (ret) {
wpa_printf(MSG_DEBUG, "nl80211: Join IBSS failed: ret=%d (%s)",
@@ -5985,12 +6034,8 @@
if (ret)
goto fail;
- if (nl_connect)
- ret = send_and_recv(drv->global, nl_connect, msg,
- NULL, (void *) -1);
- else
- ret = send_and_recv_msgs(drv, msg, NULL, (void *) -1);
-
+ ret = send_and_recv_msgs_owner(drv, msg, nl_connect, 1, NULL,
+ (void *) -1);
msg = NULL;
if (ret) {
wpa_printf(MSG_DEBUG, "nl80211: MLME connect failed: ret=%d "
@@ -6059,19 +6104,17 @@
if (!(drv->capa.flags & WPA_DRIVER_FLAGS_SME)) {
enum nl80211_iftype nlmode = params->p2p ?
NL80211_IFTYPE_P2P_CLIENT : NL80211_IFTYPE_STATION;
- struct nl_sock *nl_connect = NULL;
if (wpa_driver_nl80211_set_mode(priv, nlmode) < 0)
return -1;
if (params->key_mgmt_suite == WPA_KEY_MGMT_SAE ||
- params->key_mgmt_suite == WPA_KEY_MGMT_FT_SAE) {
- nl_connect = bss->nl_connect;
+ params->key_mgmt_suite == WPA_KEY_MGMT_FT_SAE)
bss->use_nl_connect = 1;
- } else {
+ else
bss->use_nl_connect = 0;
- }
- return wpa_driver_nl80211_connect(drv, params, nl_connect);
+ return wpa_driver_nl80211_connect(drv, params,
+ get_connect_handle(bss));
}
nl80211_mark_disconnected(drv);
@@ -6106,7 +6149,9 @@
goto fail;
}
- ret = send_and_recv_msgs(drv, msg, NULL, NULL);
+ ret = send_and_recv_msgs_owner(drv, msg,
+ get_connect_handle(drv->first_bss), 1,
+ NULL, NULL);
msg = NULL;
if (ret) {
wpa_dbg(drv->ctx, MSG_DEBUG,
@@ -7242,6 +7287,12 @@
}
#endif /* CONFIG_LIBNL3_ROUTE */
+ if (drv->capa.flags2 & WPA_DRIVER_FLAGS2_CONTROL_PORT_RX) {
+ wpa_printf(MSG_DEBUG,
+ "nl80211: Do not open EAPOL RX socket - using control port for RX");
+ goto skip_eapol_sock;
+ }
+
drv->eapol_sock = socket(PF_PACKET, SOCK_DGRAM, htons(ETH_P_PAE));
if (drv->eapol_sock < 0) {
wpa_printf(MSG_ERROR, "nl80211: socket(PF_PACKET, SOCK_DGRAM, ETH_P_PAE) failed: %s",
@@ -7254,6 +7305,7 @@
wpa_printf(MSG_INFO, "nl80211: Could not register read socket for eapol");
goto failed;
}
+skip_eapol_sock:
if (linux_get_ifhwaddr(drv->global->ioctl_sock, bss->ifname,
params->own_addr))
@@ -8125,8 +8177,13 @@
drv->test_use_roc_tx = 1;
}
- if (os_strstr(param, "control_port=0"))
+ if (os_strstr(param, "control_port=0")) {
drv->capa.flags &= ~WPA_DRIVER_FLAGS_CONTROL_PORT;
+ drv->capa.flags2 &= ~WPA_DRIVER_FLAGS2_CONTROL_PORT_RX;
+ }
+
+ if (os_strstr(param, "control_port_ap=1"))
+ drv->control_port_ap = 1;
if (os_strstr(param, "full_ap_client_state=0"))
drv->capa.flags &= ~WPA_DRIVER_FLAGS_FULL_AP_CLIENT_STATE;
@@ -9500,7 +9557,12 @@
if (nlmsg_append(msg, (void *) data, data_len, NLMSG_ALIGNTO) <
0)
goto fail;
- ret = send_and_recv_msgs(drv, msg, cmd_reply_handler, buf);
+ /* This test vendor_cmd can be used with nl80211 commands that
+ * need the connect nl_sock, so use the owner-setting variant
+ * of send_and_recv_msgs(). */
+ ret = send_and_recv_msgs_owner(drv, msg,
+ get_connect_handle(bss), 0,
+ cmd_reply_handler, buf);
if (ret)
wpa_printf(MSG_DEBUG, "nl80211: command failed err=%d",
ret);
@@ -9955,7 +10017,8 @@
if (nl80211_put_mesh_config(msg, ¶ms->conf) < 0)
goto fail;
- ret = send_and_recv_msgs(drv, msg, NULL, NULL);
+ ret = send_and_recv_msgs_owner(drv, msg, get_connect_handle(bss), 1,
+ NULL, NULL);
msg = NULL;
if (ret) {
wpa_printf(MSG_DEBUG, "nl80211: mesh join failed: ret=%d (%s)",
@@ -10012,7 +10075,8 @@
wpa_printf(MSG_DEBUG, "nl80211: mesh leave (ifindex=%d)", drv->ifindex);
msg = nl80211_drv_msg(drv, 0, NL80211_CMD_LEAVE_MESH);
- ret = send_and_recv_msgs(drv, msg, NULL, NULL);
+ ret = send_and_recv_msgs_owner(drv, msg, get_connect_handle(bss), 0,
+ NULL, NULL);
if (ret) {
wpa_printf(MSG_DEBUG, "nl80211: mesh leave failed: ret=%d (%s)",
ret, strerror(-ret));
diff --git a/src/drivers/driver_nl80211.h b/src/drivers/driver_nl80211.h
index 6e6c872..19ac44a 100644
--- a/src/drivers/driver_nl80211.h
+++ b/src/drivers/driver_nl80211.h
@@ -171,6 +171,7 @@
unsigned int roam_vendor_cmd_avail:1;
unsigned int get_supported_akm_suites_avail:1;
unsigned int add_sta_node_vendor_cmd_avail:1;
+ unsigned int control_port_ap:1;
u64 vendor_scan_cookie;
u64 remain_on_chan_cookie;
@@ -229,6 +230,7 @@
int send_and_recv_msgs(struct wpa_driver_nl80211_data *drv, struct nl_msg *msg,
int (*valid_handler)(struct nl_msg *, void *),
void *valid_data);
+struct nl_sock * get_connect_handle(struct i802_bss *bss);
int nl80211_create_iface(struct wpa_driver_nl80211_data *drv,
const char *ifname, enum nl80211_iftype iftype,
const u8 *addr, int wds,
diff --git a/src/drivers/driver_nl80211_capa.c b/src/drivers/driver_nl80211_capa.c
index b4fed9e..f033591 100644
--- a/src/drivers/driver_nl80211_capa.c
+++ b/src/drivers/driver_nl80211_capa.c
@@ -441,6 +441,9 @@
if (ext_feature_isset(ext_features, len,
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211))
capa->flags |= WPA_DRIVER_FLAGS_CONTROL_PORT;
+ if (ext_feature_isset(ext_features, len,
+ NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH))
+ capa->flags2 |= WPA_DRIVER_FLAGS2_CONTROL_PORT_RX;
if (ext_feature_isset(ext_features, len,
NL80211_EXT_FEATURE_VLAN_OFFLOAD))
diff --git a/src/drivers/driver_nl80211_event.c b/src/drivers/driver_nl80211_event.c
index d4ca2eb..17a06d8 100644
--- a/src/drivers/driver_nl80211_event.c
+++ b/src/drivers/driver_nl80211_event.c
@@ -2505,12 +2505,34 @@
static void nl80211_control_port_frame(struct wpa_driver_nl80211_data *drv,
struct nlattr **tb)
{
- if (!tb[NL80211_ATTR_MAC] || !tb[NL80211_ATTR_FRAME])
+ u8 *src_addr;
+ u16 ethertype;
+
+ if (!tb[NL80211_ATTR_MAC] ||
+ !tb[NL80211_ATTR_FRAME] ||
+ !tb[NL80211_ATTR_CONTROL_PORT_ETHERTYPE])
return;
- drv_event_eapol_rx(drv->ctx, nla_data(tb[NL80211_ATTR_MAC]),
- nla_data(tb[NL80211_ATTR_FRAME]),
- nla_len(tb[NL80211_ATTR_FRAME]));
+ src_addr = nla_data(tb[NL80211_ATTR_MAC]);
+ ethertype = nla_get_u16(tb[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]);
+
+ switch (ethertype) {
+ case ETH_P_RSN_PREAUTH:
+ wpa_printf(MSG_INFO, "nl80211: Got pre-auth frame from "
+ MACSTR " over control port unexpectedly",
+ MAC2STR(src_addr));
+ break;
+ case ETH_P_PAE:
+ drv_event_eapol_rx(drv->ctx, src_addr,
+ nla_data(tb[NL80211_ATTR_FRAME]),
+ nla_len(tb[NL80211_ATTR_FRAME]));
+ break;
+ default:
+ wpa_printf(MSG_INFO, "nl80211: Unxpected ethertype 0x%04x from "
+ MACSTR " over control port",
+ ethertype, MAC2STR(src_addr));
+ break;
+ }
}
@@ -2729,9 +2751,6 @@
case NL80211_CMD_UPDATE_OWE_INFO:
mlme_event_dh_event(drv, bss, tb);
break;
- case NL80211_CMD_CONTROL_PORT_FRAME:
- nl80211_control_port_frame(drv, tb);
- break;
default:
wpa_dbg(drv->ctx, MSG_DEBUG, "nl80211: Ignored unknown event "
"(cmd=%d)", cmd);
@@ -2821,6 +2840,9 @@
case NL80211_CMD_EXTERNAL_AUTH:
nl80211_external_auth(bss->drv, tb);
break;
+ case NL80211_CMD_CONTROL_PORT_FRAME:
+ nl80211_control_port_frame(bss->drv, tb);
+ break;
default:
wpa_printf(MSG_DEBUG, "nl80211: Ignored unknown event "
"(cmd=%d)", gnlh->cmd);
diff --git a/src/drivers/driver_nl80211_scan.c b/src/drivers/driver_nl80211_scan.c
index 04f6bb8..17e8b2c 100644
--- a/src/drivers/driver_nl80211_scan.c
+++ b/src/drivers/driver_nl80211_scan.c
@@ -872,7 +872,7 @@
wpa_driver_nl80211_mlme(drv, addr,
NL80211_CMD_DEAUTHENTICATE,
WLAN_REASON_PREV_AUTH_NOT_VALID, 1,
- NULL);
+ get_connect_handle(drv->first_bss));
}
}