diff --git a/wpa_supplicant/config.c b/wpa_supplicant/config.c
index e1d9824..82b8fc6 100644
--- a/wpa_supplicant/config.c
+++ b/wpa_supplicant/config.c
@@ -4305,6 +4305,7 @@
 	config->disassoc_imminent_rssi_threshold =
 		DEFAULT_DISASSOC_IMMINENT_RSSI_THRESHOLD;
 	config->oce = DEFAULT_OCE_SUPPORT;
+	config->btm_offload = DEFAULT_BTM_OFFLOAD;
 #endif /* CONFIG_MBO */
 
 	if (ctrl_interface)
@@ -5048,6 +5049,7 @@
 		    MBO_CELL_CAPA_NOT_SUPPORTED), 0 },
 	{ INT_RANGE(disassoc_imminent_rssi_threshold, -120, 0), 0 },
 	{ INT_RANGE(oce, 0, 3), 0 },
+	{ INT_RANGE(btm_offload, 0, 1), CFG_CHANGED_DISABLE_BTM_NOTIFY },
 #endif /* CONFIG_MBO */
 	{ INT(gas_address3), 0 },
 	{ INT_RANGE(ftm_responder, 0, 1), 0 },
diff --git a/wpa_supplicant/config.h b/wpa_supplicant/config.h
index 0ca27cb..331c64e 100644
--- a/wpa_supplicant/config.h
+++ b/wpa_supplicant/config.h
@@ -45,6 +45,7 @@
 #define DEFAULT_DISASSOC_IMMINENT_RSSI_THRESHOLD -75
 #define DEFAULT_OCE_SUPPORT OCE_STA
 #define DEFAULT_EXTENDED_KEY_ID 0
+#define DEFAULT_BTM_OFFLOAD 0
 
 #include "config_ssid.h"
 #include "wps/wps.h"
@@ -376,6 +377,7 @@
 #define CFG_CHANGED_SCHED_SCAN_PLANS BIT(17)
 #define CFG_CHANGED_WOWLAN_TRIGGERS BIT(18)
 #define CFG_CHANGED_DISABLE_BTM BIT(19)
+#define CFG_CHANGED_DISABLE_BTM_NOTIFY BIT(20)
 
 /**
  * struct wpa_config - wpa_supplicant configuration data
@@ -1447,6 +1449,14 @@
 	 *  - Set BIT(1) to enable OCE in STA-CFON mode
 	 */
 	unsigned int oce;
+
+	/**
+	 * btm_offload - Set where to perform roaming logic
+	 *  - Set to 0 to handle fully roaming logic in supplicant
+	 *  - Set to 1 to skip roaming logic in supplicant for firmware roaming
+	 *    just parse BTM frame and notify framework
+	 */
+        int btm_offload;
 #endif /* CONFIG_MBO */
 
 	/**
diff --git a/wpa_supplicant/wnm_sta.c b/wpa_supplicant/wnm_sta.c
index 2e09102..ac04383 100644
--- a/wpa_supplicant/wnm_sta.c
+++ b/wpa_supplicant/wnm_sta.c
@@ -1451,6 +1451,22 @@
 			wpa_s->wnm_dissoc_timer * beacon_int * 128 / 125, url);
 	}
 
+#ifdef CONFIG_MBO
+	vendor = get_ie(pos, end - pos, WLAN_EID_VENDOR_SPECIFIC);
+	if (vendor) {
+		wpas_mbo_ie_trans_req(wpa_s, vendor + 2, vendor[1]);
+		if (wpa_s->conf->btm_offload) {
+			wpa_msg(wpa_s, MSG_INFO,
+				"WNM: Notify BSS Transition Management Request frame status");
+			wpa_s->bss_tm_status = WNM_BSS_TM_ACCEPT;
+			wpas_notify_bss_tm_status(wpa_s);
+			/* since it could be referenced in the scan result logic, initialize it */
+			wpa_s->wnm_mbo_trans_reason_present = 0;
+			return;
+		}
+	}
+#endif /* CONFIG_MBO */
+
 	if (wpa_s->wnm_mode & WNM_BSS_TM_REQ_DISASSOC_IMMINENT) {
 		wpa_msg(wpa_s, MSG_INFO, "WNM: Disassociation Imminent - "
 			"Disassociation Timer %u", wpa_s->wnm_dissoc_timer);
@@ -1462,12 +1478,6 @@
 		}
 	}
 
-#ifdef CONFIG_MBO
-	vendor = get_ie(pos, end - pos, WLAN_EID_VENDOR_SPECIFIC);
-	if (vendor)
-		wpas_mbo_ie_trans_req(wpa_s, vendor + 2, vendor[1]);
-#endif /* CONFIG_MBO */
-
 	if (wpa_s->wnm_mode & WNM_BSS_TM_REQ_PREF_CAND_LIST_INCLUDED) {
 		unsigned int valid_ms;
 
diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
index 3b90567..f5194be 100644
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -1584,6 +1584,12 @@
 # Set to 1 to disable BSS transition management
 #disable_btm=0
 
+# This value is used to set where to perform roaming logic
+# Set to 0 to handle roaming logic fully in supplicant
+# Set to 1 to skip roaming logic in supplicant and handle it in firmware
+# In supplicant, just parse BTM frame and notify framework
+#btm_offload=0
+
 # Enable EDMG capability in STA/AP mode, default value is false
 #enable_edmg=1