diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index 1357649..e34d75c 100644
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -1071,9 +1071,6 @@
 # 1 = yes (MLO)
 #mld_ap=0
 
-# MLD ID - Affiliated MLD ID
-#mld_id=1
-
 # AP MLD MAC address
 # The configured address will be set as the interface hardware address and used
 # as the AP MLD MAC address. If not set, the current interface hardware address
@@ -1581,6 +1578,16 @@
 #acct_server_port=1813
 #acct_server_shared_secret=secret2
 
+# RADIUS/TLS instead of RADIUS/UDP
+#auth_server_addr=127.0.0.1
+#auth_server_port=2083
+#auth_server_type=TLS
+#auth_server_shared_secret=radsec
+#auth_server_ca_cert=<path to trusted CA certificate(s)>
+#auth_server_client_cert=<path to client certificate>
+#auth_server_private_key=<path to private key>
+#auth_server_private_key_passwd=<password for decrypting private key>
+
 # Retry interval for trying to return to the primary RADIUS server (in
 # seconds). RADIUS client code will automatically try to use the next server
 # when the current server is not replying to requests. If this interval is set,
@@ -2555,6 +2562,23 @@
 #multi_ap_backhaul_wpa_psk=0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
 #multi_ap_backhaul_wpa_passphrase=secret passphrase
 
+# Multi-AP Profile
+# Indicate the supported Multi-AP profile (default: 2)
+# 1 = Supports Multi-AP profile 1 as defined in Wi-Fi EasyMesh specification
+# 2 = Supports Multi-AP profile 2 as defined in Wi-Fi EasyMesh specification
+#multi_ap_profile=2
+
+# Multi-AP client disallow
+# Used to disallow profile specific backhaul STA association
+# Bitmap of the disallowed Profile-X profiles
+# 1 = Profile-1 Backhaul STA association disallowed
+# 2 = Profile-2 Backhaul STA association disallowed
+#multi_ap_client_disallow=0
+
+# Multi-AP VLAN ID
+# A valid non-zero VLAN ID will be used to update Default IEEE 802.1Q Setting
+#multi_ap_vlanid=0
+
 # WPS UPnP interface
 # If set, support for external Registrars is enabled.
 #upnp_iface=br0
@@ -3088,6 +3112,9 @@
 # Enable neighbor report via radio measurements
 #rrm_neighbor_report=1
 
+# Enable link measurement report via radio measurements
+#rrm_link_measurement_report=1
+
 # Enable beacon report via radio measurements
 #rrm_beacon_report=1