Accumulative patch from commit dc013f1e37df3462085cf01a13f0c432f146ad7a
Author: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Tue Jan 15 12:03:29 2013 +0200
eapol_test: Remove unnecessary header file inclusion
- P2P: Send P2P-FIND-STOPPED event in the new continue-search states
- P2P: Add some more details on Service Query TLV format
- P2P: Use the same Dialog Token value for every GO Negotiation retry
- P2P: Publish more connected clients info in Probe Response frames
- P2P: Fix some memory leaks in p2p_add_device()
- P2P: Use the same Dialog Token value for every PD retry
- P2P: Document operating channel selection functions
- P2P: Always re-select operating channel if not hard coded
- P2P: Do not allow re-selection of GO channel if forced_freq in use
- P2P: Set FORCE_FREQ flag as part of p2p_prepare_channel()
- P2P: Share a single function for GO channel selection
- P2P: Prefer operating channels where HT40 is possible
- P2P: Be more careful with wpa_config_update_psk() call
- P2P: Allow PSK to be used instead of passphrase for persistent GO
- P2P: Consider age for the P2P scan results
- Move some P2P offchannel operations to offchannel.c
- P2P: Add more complete description of p2p_cancel
- P2P: Allow p2p_cancel to be used to stop p2p_connect-join operation
- Interworking changes
- WNM changes
- WPS changes
- SAE changes
Change-Id: I38b847d3460066cc58aecbcf67266bfcff1d344e
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
index 5f0dec6..18460b8 100644
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -281,6 +281,14 @@
# ieee80211w parameter.
#pmf=0
+# Enabled SAE finite cyclic groups in preference order
+# By default (if this parameter is not set), the mandatory group 19 (ECC group
+# defined over a 256-bit prime order field) is preferred, but other groups are
+# also enabled. If this parameter is set, the groups will be tried in the
+# indicated order. The group values are listed in the IANA registry:
+# http://www.iana.org/assignments/ipsec-registry/ipsec-registry.xml#ipsec-registry-9
+#sae_groups=21 20 19 26 25
+
# Interworking (IEEE 802.11u)
# Enable Interworking
@@ -389,6 +397,11 @@
# phase2: Pre-configure Phase 2 (inner authentication) parameters
# This optional field is used with like the 'eap' parameter.
#
+# excluded_ssid: Excluded SSID
+# This optional field can be used to excluded specific SSID(s) from
+# matching with the network. Multiple entries can be used to specify more
+# than one SSID.
+#
# for example:
#
#cred={
@@ -489,6 +502,23 @@
# set, scan results that do not match any of the specified frequencies are not
# considered when selecting a BSS.
#
+# bgscan: Background scanning
+# wpa_supplicant behavior for background scanning can be specified by
+# configuring a bgscan module. These modules are responsible for requesting
+# background scans for the purpose of roaming within an ESS (i.e., within a
+# single network block with all the APs using the same SSID). The bgscan
+# parameter uses following format: "<bgscan module name>:<module parameters>"
+# Following bgscan modules are available:
+# simple - Periodic background scans based on signal strength
+# bgscan="simple:<short bgscan interval in seconds>:<signal strength threshold>:
+# <long interval>"
+# bgscan="simple:30:-45:300"
+# learn - Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+# bgscan="learn:<short bgscan interval in seconds>:<signal strength threshold>:
+# <long interval>[:<database file name>]"
+# bgscan="learn:30:-45:300:/etc/wpa_supplicant/network1.bgscan"
+#
# proto: list of accepted protocols
# WPA = WPA/IEEE 802.11i/D3.0
# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
@@ -802,6 +832,34 @@
# DTIM period in Beacon intervals for AP mode (default: 2)
#dtim_period=2
+# disable_ht: Whether HT (802.11n) should be disabled.
+# 0 = HT enabled (if AP supports it)
+# 1 = HT disabled
+#
+# disable_ht40: Whether HT-40 (802.11n) should be disabled.
+# 0 = HT-40 enabled (if AP supports it)
+# 1 = HT-40 disabled
+#
+# disable_sgi: Whether SGI (short guard interval) should be disabled.
+# 0 = SGI enabled (if AP supports it)
+# 1 = SGI disabled
+#
+# ht_mcs: Configure allowed MCS rates.
+# Parsed as an array of bytes, in base-16 (ascii-hex)
+# ht_mcs="" // Use all available (default)
+# ht_mcs="0xff 00 00 00 00 00 00 00 00 00 " // Use MCS 0-7 only
+# ht_mcs="0xff ff 00 00 00 00 00 00 00 00 " // Use MCS 0-15 only
+#
+# disable_max_amsdu: Whether MAX_AMSDU should be disabled.
+# -1 = Do not make any changes.
+# 0 = Enable MAX-AMSDU if hardware supports it.
+# 1 = Disable AMSDU
+#
+# ampdu_density: Allow overriding AMPDU density configuration.
+# Treated as hint by the kernel.
+# -1 = Do not make any changes.
+# 0-3 = Set AMPDU density (aka factor) to specified value.
+
# Example blocks:
# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers