diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index fa9a855..54c8b95 100644
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -1163,6 +1163,10 @@
 # Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The
 # entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be
 # added to enable SHA256-based stronger algorithms.
+# FILS-SHA256 = Fast Initial Link Setup with SHA256
+# FILS-SHA384 = Fast Initial Link Setup with SHA384
+# FT-FILS-SHA256 = FT and Fast Initial Link Setup with SHA256
+# FT-FILS-SHA384 = FT and Fast Initial Link Setup with SHA384
 # (dot11RSNAConfigAuthenticationSuitesTable)
 #wpa_key_mgmt=WPA-PSK WPA-EAP
 
@@ -1273,6 +1277,9 @@
 # http://www.iana.org/assignments/ipsec-registry/ipsec-registry.xml#ipsec-registry-9
 #sae_groups=19 20 21 25 26
 
+# FILS Cache Identifier (16-bit value in hexdump format)
+#fils_cache_id=0011
+
 ##### IEEE 802.11r configuration ##############################################
 
 # Mobility Domain identifier (dot11FTMobilityDomainID, MDID)
@@ -1326,6 +1333,14 @@
 # 1 = FT-over-DS enabled (default)
 #ft_over_ds=1
 
+# Whether to generate FT response locally for PSK networks
+# This avoids use of PMK-R1 push/pull from other APs with FT-PSK networks as
+# the required information (PSK and other session data) is already locally
+# available.
+# 0 = disabled (default)
+# 1 = enabled
+#ft_psk_generate_local=0
+
 ##### Neighbor table ##########################################################
 # Maximum number of entries kept in AP table (either for neigbor table or for
 # detecting Overlapping Legacy BSS Condition). The oldest entry will be
@@ -1925,6 +1940,12 @@
 # This parameter only controls publishing via Extended Capabilities element.
 # Actual functionality is managed outside hostapd.
 #ftm_initiator=0
+#
+# Stationary AP config indicates that the AP doesn't move hence location data
+# can be considered as always up to date. If configured, LCI data will be sent
+# as a radio measurement even if the request doesn't contain a max age element
+# that allows sending of such data. Default: 0.
+#stationary_ap=0
 
 ##### TESTING OPTIONS #########################################################
 #