tree 5fa340c51f9d6d8f8bbb0e53ebbbd4d39faafe7b
parent a152019ce5fb82ccefd260c5d2d2ed807c6ce9f2
author Sunil Ravi <sunilravi@google.com> 1663128277 -0700
committer Mahesh KKV <maheshkkv@google.com> 1667348313 -0700

[wpa_supplicant] Cumulative patch from commit 61c6e7c62

Bug: 245752074
Test: connect/disconnect to WPA2, WPA3 networks
Test: SoftAp & p2p connection
Test: Regression test(b/247129565)

BYPASS_INCLUSIVE_LANGUAGE_REASON=Merged from Open source

61c6e7c62 nl80211: Parsing of MLO connection info from roam+auth event
3d842d910 MLD STA: Add support for parsing MLO KDEs
e1105bab8 Add QCA vendor interface support for Spatial Reuse (SR) feature
1f39f85b7 Fix compiler warning on shift overflow in QCA vendor definitions
c5b950b6a Fix compilation error due to use of bitwise '&' with boolean operands
7bdd3f2aa P2P: Allow P2P CSA from 5 GHz to 2.4 GHz band
a7684a21c Update hw mode after ACS selects the channel
768537921 P2P: Set operating class along with operating channel width
ee7eec518 P2P: Fix the issue in setting optimized listen channel
01944c095 Fix RNR BSSID setting for own interfaces
3a7fe1e21 dbus: Omit FT key mgmt capabilities without CONFIG_IEEE80211R
d2caf6ef5 dbus: Fix property DebugShowKeys and DebugTimestamp
a17f9a2d4 Add usage print for -q flag
f77c0f914 ACS: Include frequency in info messages
0c7b3814c Use a less generic name for IEEE802.11 CRC-32 routine
7ed17eee3 ACS: Don't select indoor channel on outdoor operation
1f795df7a wpa_supplicant man page missing -I flag
ef2d2e81a Add a new QCA vendor attribute to support flexible TWT
1b6f3b585 MLD STA: Indicate per link channel switch
b7f98d92d MLD STA: Add per-link MLO signal poll
28b2256da MLD STA: Add MLO_STATUS control interface command
8dd5b9a9e nl80211: Send bssid info as parameter to nl80211_get_link_signal()
6ca98040a MLD STA: Indicate AP MLD address in STATUS command
22ba81cfe MLD STA: Indicate AP MLD address in CTRL-EVENT-CONNECTED
db99e7341 Add AP MLD address into BSS command output
4bd316524 bss: Parse and store MLD address of the AP from Multi-Link element
cc29cadf2 Helper function to get MLD address from Basic Multi-Link element
9a8bd7be0 scan: Helper function to get ML IE of specified type from scan result IEs
e21128614 nl80211: Use AP MLD address to set supplicant port as authorized
7784964cb MLD STA: Fetch MLO connection info into core wpa_supplicant
e2147f917 nl80211: Indicate MLO connection info in driver status
c7741009f nl80211: Parse MLO connection info in NL80211_CMD_CONNECT event
bd499f0e6 Add a helper function to get ML IE of specified type from IEs buffer
36645f839 EHT: Add Multi-Link element field definitions
62612dfc1 P2P: Use only PSC for P2P group in the 6 GHz band
7974d8053 Configure RRM elements to the driver in the driver-AP-SME case
d1a7626ff SAE: Use correct SSID profile for SAE auth retries during external auth
096feac19 SAE: Include the new -EXT-KEY AKMs in external auth case
76793cbbc SAE: Make sure H2E PT is derived for external auth SSID profile
122cdd592 Enable TWT responder AP role only if IEEE 802.11ax/HE is enabled
ed442e8dc Add p2p_optimize_listen_chan=1 to default Android template
5b76c3654 Extend attributes of QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO
897e09085 QCA vendor attribute to configure periodic sounding
0cc6f985d wlantest: Recognize additional not-Robust Action categories
cd392151c Validate MAC Address KDE length in the parser
6f8af5974 Fix expiration logic for the first PTKSA cache entry
85e28a79b PASN: Set secure ranging context to driver after association
9b62b61c6 PASN: Configure secure ranging context to the driver in AP mode
de3b91a17 nl80211: Define vendor interface functions to offload PASN authentication
edd89d6db PASN: Set keys from PTKSA cache for a valid PTKSA entry
e2c3cdf2c nl80211: Register PASN Authentication frames for SME-in-driver
58a96187e nl80211: Allow PASN Authentication frames with random (foreign) MAC address
24929543b PASN: Deauthenticate on PTKSA cache entry expiration
74d894a2e PASN: Offload handshake for multiple peers from the driver
06317f5e3 PASN: Add driver operation to set secure ranging context and PASN response
2edebc6b6 PASN: Add interface to handle PASN request from the driver
9330bf318 PASN: Add function to compute LTF keyseed from KDK
9391f7100 Add own MAC address in PASN supplicant start and deauthentication
580bd04cf Add own MAC address used for key derivation to PTKSA cache
d0d585c48 Store secure ranging driver capabilities in WPA state machine
96a604128 Use separate PASN capabilities for AP and STA modes
909fa448e EAPOL: Update PMK length in EAPOL callback to support longer keys
c80dc6940 OpenSSL: Include rsa.h for all OpenSSL versions
723eb4f38 P2P: Fix a typo in a comment about removing 6 GHz channels
e9627f8c3 P2P: Skip 6 GHz band directly if 6 GHz P2P is disabled
03f7f633a Fix wrong AKM priority for FILS
1f9a988f1 DPP3: Do not initiate PKEX for PB if no configuration is available
aa75aa1dc Add QCA vendor interface to get SAR capabilities to userspace
5de45546d Add support to send multi AKM connect request when driver's SME in use
0ce1545dc nl80211: Determine maximum number of supported AKMs
48c620829 Update PSK after cross AKM roaming to WPA-PSK when driver's SME in use
7e97c619a Sync with wireless-next.git include/uapi/linux/nl80211.h
54706957e DPP: Fix DPP_RELAY_ADD_CONTROLLER command parsing
44b26d82b nl80211: Silence a compiler warning on printf in 32-bit builds
4ae14deee DPP3: Use chirping channel list in PB discovery
c58be1d8f DPP: Channel list generation for presence announcement to helper funcion
820211245 OpenSSL: Fix HPKE in some corner cases
57968faea DPP: Do not discard network introduction frames in test mode
d72302c6b DPP: Do not use 6 GHz channels for push button
89de431f2 DPP: Add config response status value to DPP-CONF-SENT
80d5e264c Enhance QCA vendor roam event to indicate MLO links after reassociation
662249306 Update copyright notices for the QCA vendor definitions
1d08b238c nl80211: Allow more time for the initial scan with 6 GHz
faf9c04cb Remove a host of unnecessary OPENSSL_IS_BORINGSSL ifdefs
b9cd5a82f Always process pending QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH data
ef4cd8e33 QoS: Use common classifier_mask for ipv4/ipv6
93be02592 Add fixed FDD mode to qca_btc_chain_mode QCA vendor attribute
5565fbee2 DPP: Check Enrollee supported curves when building Config Response
4cfb484e9 DPP: Allow dpp_controller_start without arguments in CLIs
c97000933 Fix ifdef condition for imsi_privacy_cert
f70db167a SAE: Derive a variable length PMK with the new AKM suites
91010e6f6 SAE: Indicate AKM suite selector in commit for new AKM suites
e81ec0962 SAE: Use H2E unconditionally with the new AKM suites
f8eed2e8b SAE: Store PMK length and AKM in SAE data
9dc4e9d13 SAE: EAPOL-Key and key/MIC length information for the new AKM suites
a32ef3cfb SAE: Driver capability flags for the new SAE AKM suites
91df8c9c6 SAE: Internal WPA_KEY_MGMT_* defines for extended key AKMs
5c8a714b1 SAE: Use wpa_key_mgmt_sae() helper
5456b0f26 Define new RSN AKM suite selector values
def33101c DPP: Clear push button announcement state on wpa_supplicant FLUSH
d22dfe918 DPP: Event message for indicating when Relay would need a Controller
bfe3cfc38 DPP: Allow Relay connections to Controllers to be added and removed
808834b18 Add a comparison function for hostapd_ip_addr
f7763880b DPP: Advertise Configurator connectivity on Relay automatically
ca682f80a DPP: Dynamic Controller initiated connection on Relay
d2388bcca DPP: Strict validation of PKEX peer bootstrapping key during auth
a7b8cef8b DPP3: Fix push button boostrapping key passing through PKEX
69d7c8e6b DPP: Add peer=id entry for PKEX-over-TCP case
1ff9251a8 DPP3: Push button Configurator in wpa_supplicant
e9137950f DPP: Recognize own PKEX Exchange Request if it ends up being received
692956446 DPP: Note PKEX code/identifier deletion in debug log
ae4a3a6f6 DPP: Add DPP-CONF-REQ-RX event for Controller
fb2937b85 DPP: Allow Controller to initiate PKEX through Relay
15af83cf1 DPP: Delete PKEX code and identifier on success completion of PKEX
479e412a6 DPP3: Default value for dpp_connector_privacy
148de3e0d DPP3: Private Peer Introduction protocol
786ea402b HPKE base mode with single-shot API
f0273bc81 OpenSSL: Remove a forgotten debug print
68209ddbe DPP: Allow 3rd party information to be added into config object
0e2217c95 DPP: Allow 3rd party information to be added into config request obj
3d82fbe05 Add QCA vendor subcommand and attributes for SCS rule configuration
16b62ddfa QCA vendor attribute for DBAM configuration
451ede2c3 DPP: Allow AP/Relay to be configured to listed for new TCP connections
7bbe85987 DPP3: Allow external configuration to be specified on AP for PB
8db786a43 DPP3: Testing functionality for push button announcements
37bccfcab DPP3: Push button bootstrap mechanism
a0054fe7c Add AP and STA specific P802.11az security capabilities (vendor command)
159e63613 QCA vendor command for CoAP offload processing
3b7bb17f6 Add QCA vendor attribute for TIM beacon statistics

Change-Id: Ic5faae10839f317cc70a4df7a3f2047812ffd34c