[wpa_supplicant] Cumulative patch from commit d68c0dd4d
Bug: 156933657
Test: Verify Passpoint ANQP functionality and Passpoint association
Test: Connect to Passpoint, Open, WPA2, WPA3 networks and run traffic
Test: Regression test passed (Bug: 171270733)
BYPASS_INCLUSIVE_LANGUAGE_REASON=Merged from Open source
d68c0dd4d build: lib.rules: Add common-clean
d34b33451 wpa_supplicant: Fix frequency config for VHT/HE cases
0747432ef Fix spelling of "unexpected" in messages
d720de929 hostapd: Fix typos
4c66894fa eap_peer: Add .gitignore with *.so
13256b8cf P2P: Stop old listen radio work before go to WAIT_PEER_IDLE state
0f7989d8a MSCS: Fix decapsulating subelements from MSCS descriptor
cc3d6efa8 Add QCA interface for driver to report various connect fail reason codes
39748963d build: Fix libeap_peer.a build
c3f37c35f DFS: Use helper functions for VHT/HE parameters
a72599b31 hw_features: Better debug messages for some error cases
5965c7da5 wpa_supplicant: Enable VHT and HE in default config parameters
df6745e8c wpa_supplicant: Handle HT40 and mode downgrade in AP mode
93da12fd9 mesh: Fix channel init order, disable pri/sec channel switch
7f8ac02e8 HE/VHT: Fix frequency setup with HE enabled
0f07230eb DPP2: Add privacyProtectionKey into Configurator backup/restore
a0ccc4017 DPP2: Use ppKey to decrypt E'-id on Configurator
99d7bf234 DPP2: Use the new privacy protection key to protect E-id on Enrollee
37df40845 DPP2: Copy received ppKey into wpa_supplicant network profile
a8ee2292b DPP2: Parse ppKey from Connector
2a8c92887 DPP2: Add ppKey into Connector
9c1fbff07 DPP2: Generate a privacy protection key for Configurator
1d1475845 DPP: Make dpp_keygen_configurator() a static function
1d0d8888a build: Make more library things common
f4b3d14e9 build: Make a common library build
ac1447ae9 build: Rebuild libs all the time
6c41d43f1 mesh: Stop SAE auth timer when mesh node is removed
154b18d95 build: Fix dependency file inclusion
79db311e8 macsec_linux: Fix receive-lowest-PN setting
e3b47cdf8 DPP2: Add DPP_CHIRP commands to hostapd_cli and wpa_cli
cb3b70936 P2P: Set ap_configured_cb during group reform process
0e9f62e51 P2P: Fallback to GO negotiation after running out of GO scan attempts
1a0169695 hostapd_cli: Add dpp_bootstrap_set command
7e4ed93d3 wpa_cli: Add dpp_bootstrap_set command
283eee8ee gitignore: Clean up a bit
ae0b90dfa mesh: Allow channel switch command
87098d332 build: Put archive files into build/ folder too
00b5e99b6 build: Use the new build system for fuzz tests
a49f62884 wolfSSL: Fix wrong types in tls_wolfssl.c
58c18bcf8 hostapd: Fix error message for radius_accept_attr config option
52a1b2834 nl80211: Unbreak mode processing due to presence of S1G band
4b96fafcd D-Bus: Share 'remove all networks' with CLI
2818e9ca9 wpa_supplicant: Do not retry scan if operation is not supported
c0b88d129 P2P: Limit P2P_DEVICE name to appropriate ifname size
566ea1b7c mesh: Set correct address for mesh default broadcast/multicast keys
17d6ba4c9 DBus: Add "Roam" command support
6e757bba8 Use consistent spelling of "homogeneous"
cff545720 wpa_supplicant: Clear blacklist when SSID configs change
bbbb3c04e wpa_supplicant: Add new blacklist tests
164b8dd8e wpa_supplicant: Add wpa_blacklist_update()
d53011002 wpa_supplicant: Implement time-based blacklisting
2fd35d985 wpa_supplicant: Track consecutive connection failures
6d6310701 Fix STA mode default TXOP Limit values for AC_VI and AC_VO
dcc5288e5 gitignore: Add various things
ce963433b build: Allow overriding BUILDDIR from command line
ad6e4a5c5 build: Remove hostapd vs. wpa_supplicant build checks
6acda5322 build: Add .config file to dependencies
722138cd2 build: Put object files into build/ folder
0464d5d5d build: Move config file handling into build.rules
0430bc826 build: Add a common-clean target
06a6adb54 build: Use build.rules in lib.rules
3ff115db6 build: Disable built-in rules
a41a29192 build: Pull common fragments into a build.rules file
21cc50a43 HS 2.0 server: Add a .gitignore file
a28d127b1 AP: Reflect status code in SAE reflection attack test
e8b85c078 iface match: Unspecified matched interfaces should not log driver fails
83fa0a100 op_classes: Don't report an error when there are none to add
8776551bf BSD: don't log SIOCG80211 errors during interface setup
41d20df7f D-Bus: Allow empty string in dbus network properties
4756ecabc Allow bgscan parameters to be reconfigured
922fa0997 Global parser functions to return 1 when property unchanged
a87173b1d D-Bus: Skip property update actions when wpa_config_set() returns 1
1c58317f5 D-Bus: Allow changing an interface bridge via D-Bus
14318ccff P2P: Add configuration support to disable P2P in 6 GHz band
debf3e216 OCV: Work around for misbehaving STAs that indicate OCVC=1 without OCI
d48a3a676 FT: Modify status code in FT Reassoc frame for invalid OCI channel info
0e8d569d4 DPP2: Presence Announcement notification in STA
980c4da41 DPP2: Presence Announcement notification in AP
8b667bfa1 DPP2: Presence Announcement notification
cf3d260c3 DPP2: Fix hostapd crash setting global configurator params on chirp RX
a8f304228 Document the missing ignore_broadcast_ssid network profile parameter
aa704020a DBus: Update dont_quote[] with ignore_broadcast_ssid parameter
88d3f43bd DPP2: Replace OneAsymmetricKey version number (v2 to v1)
8e5739c3a DPP2: Check channel 6 validity before adding it to chirp channel list
5c6c0d569 DPP: Fix GAS fragmentation for DPP Config Response from hostapd
a7f55f7f6 WPS: Enable SA Query checks for WPS AP
43ef227e9 P2P: Make use wpas_p2p_reconsider_moving_go timeout gets canceled
57536a567 P2P: Fix P2P interface remuval through wpa_supplicant_remove_iface()
760d10cde P2P: Include channels 149 to 161 for operating classes 128 and 130
ac882374a SAE: Fix error path handling for SSWU
e8a1e6a4a P2P: Fix a typo in a comment
fa63284af Add additional roam triggers to qca_vendor_roam_triggers
13feeaa10 Add a new status code to represent an already suspended TWT session
8175c2654 Add test configuration attr to start/stop transmitting FD frames
90e478aa0 DPP2: Use the PFS fallback if multiple key_mgmt values are enabled
cab139ebc Fix a typo in a comment
7e20502f7 hostapd: Resolved compiler uninitialized warning
e3ba0c4cd Do not start SA Query procedure without keys
a92660a00 Work around Supported Operating Classes element issues for 6 GHz
fd4a58ccd Additional attributes to QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL
8a6a2894d Add new QCA vendor attributes to get thermal level
41f818905 SAE-PK: Add support to skip sae_pk password check for testing purposes
a71b100c3 OCV: Allow connecting MFP incapable OCV STA when OCV is disabled in AP
5ecb45a41 OCV: Use more granular error codes for OCI validation failures
10c3e58b2 DPP2: Include E-nonce in reconfig ke derivation
4ae5e459d DPP2: Move E-nonce to be outside wrapped data in Reconfig Auth Resp
0ebf5aa34 DPP2: Replace I/R-nonce with C/E-nonce in reconfiguration
99f8506d3 Add QCA_NL80211_VENDOR_SUBCMD_MBSSID_TX_VDEV_STATUS
93a73ce02 MSCS: Fix issues due to incorrect usage of wpa_hexdump_buf()
9afb68b03 OpenSSL: Allow systemwide secpolicy overrides for TLS version
c85206ba4 QCA vendor attributes for setting ANI level
d335ca953 Update QCA vendor interface for GPIO configuration
7ddb71224 DPP2: Support QR mutual auth scan-during-auth-exchange (hostapd)
c043b1e00 DPP: Remove unnecessary dpp_global_config parameters
4ecb6dd16 DPP2: Controller support in hostapd
cd17f6877 Add QCA vendor event for firmware statistics
ba3081f1d dpp-nfc: Start listen operation more completely for NFC Tag write cases
e4adbacaf GAS: Fix memory leak on some DPP error paths
8aa91282a Fix EAPOL-Key msg 1/4 processing in a corner case
96e63008f OWE: Do not add DH Params element in AssocResp with PMKSA caching
9bc881153 DPP2: Fix build without IEEE8021X_EAPOL
2caff11d7 LibreSSL: Fix build with LibreSSL versions older than 2.9.1
55a366d7a dpp-nfc: Fix recv_octets() regression
90e05626f Add test configuration to ignore SA Query timeout
a2d35b49e Fix documentation for the test configuration attributes of FT-SAE/OCV
5d2218e61 Add get_sta_info vendor attrs to get BIP failure counters for STA mode
c6a760b9c DPP: Add process_conf_obj into TCP connection data struct
7f366fcbd DPP: Add msg_ctx into TCP connection data struct
6aa7aa808 DPP2: hostapd/AP as Enrollee/Initiator over TCP
d21dde9da MSCS: Send MSCS change/remove frames only if MSCS setup exists
af8ab3208 MSCS: Parse result of MSCS setup in (Re)Association Response frames
c504ff539 MSCS: Add support to populate MSCS Descriptor IE in (Re)AssocReq
bbd3178af MSCS: Add support to process MSCS Response frames
a11804724 MSCS: Add support to send MSCS Request frames
1733e356e dpp-nfc: Fix handover client wait for receiving handover select
596d99567 SME: Process channel switch event in SME only when supplicant's SME is used
0fa274d2b Derive seg0_idx and seg1_idx for 6 GHz when processing channel switch
5644b23de QCA vendor command to update SSID
cd708e8ff Add a vendor command for medium assessment
cc9fe46b3 Add AllPlay type to the QCA vendor element
170775232 ANQP: Add support to specify frequency in ANQP_GET command
43106e122 GAS: Update source MAC address on preassoc_mac_addr randomization
1289ecf4c GAS: Ignore preassoc_mac_addr when gas_rand_mac_addr enabled
dbe485a35 SAE-PK: Check psk param also to look for SAE-PK acceptable BSS
f5388b34e Add channel TX/RX times to QCA vendor interface of LL stats
9f9c11048 Fix QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO interface documentation
096456c0c Enhancements to the TWT attributes/parameters (vendor command)
3adc1c623 DPP2: Disconnect before starting reconfiguration
574a8fa6c DPP: Do not interpret unknown channel as missing channel list for NFC
fc3efe083 DPP2: Support mutual auth with QR in scan-during-auth-exchange case
2e956c37d DPP2: Do not close TCP socket when waiting for full Auth Resp
e4e95aabb DPP2: Allow Controller to be configured to require QR mutual auth
61c249c49 Add QCA vendor attribute to configure number of TX/RX chains
86fd6755c dpp-nfc: Use --altchan value in handover server
315422196 dpp-nfc: Update listen channel based on channel list when writing a tag
66ffe9d24 DPP2: Update Reconfig Flags attribute format
5caf4e094 DPP2: Support RA/CA functionality in Controller initiated case
9304d1b3c DPP2: Regenerate Reconfig Announcement for each transmission
b591810f9 DPP2: Add DPP Status attribute into Reconfig Auth Confirm
6d0217119 DPP2: Allow iteration count to be configured for DPP_RECONFIG
c6d0e5a93 DPP2: Add E-id in Reconfig Announcement
e5be6e68c DPP2: Add Enrollee netAccessKey group into Reconfig Announcement
2a58968d3 SAE-PK: Allow SAE-PK password to be set using the psk parameter
7ca81190a SAE-PK: Allow SAE-PK style wpa_passphrase if SAE-PK is enabled with same
844ecc70a Additional TWT attributes for response path and resume
0a9d7b169 SAE-PK: Update design for fingerprint encoding into password
2f858254c Extend GET_PMK to check PMKSA cache on the AP
b28b9dfcb OCV: OCI channel override support for testing (STA)
d309dd52b Fix the documentation for QCA_WLAN_VENDOR_ATTR_CONFIG_UDP_QOS_UPGRADE
87971ff05 SAE-PK: Fix SAE confirm writing in some AP cases with transition mode
240e9af4d SAE-PK: Make no-KEK debug prints distinct
38ef655eb dpp-nfc: Report negotiated connection handover result
4d5461842 dpp-nfc: Stop only_one run after failed handover attempt
f7b5a1d34 dpp-nfc: Do not indicate no initial HS as failure if alt HR will be sent
475b34665 dpp-nfc: Improved version of HandoverServer::serve()
dc0795e4f dpp-nfc: Stop process after successful handover client completion
b00bbbfe5 dpp-nfc: Optimize HandoverClient message receiving for alternative HR case
bbfb7b9fe dpp-nfc: Use a single handover client thread
aaa8638ed dpp-nfc: Add a class for maintaining connection handover state
66d74626b dpp-nfc: Reuse the same handover client for alternative URI
6e904441c dpp-nfc: Add peer URI into the HS in testing mode
3021b14c4 dpp-nfc: Enable more verbose nfcpy debugging
7c04bab71 tests: AES-CTR encrypt test vectors
1d3e16d0b dpp-nfc: Skip P2P management interfaces
e9c192ffc dpp-nfc: Ignore (no) response to initial handover request
7d27bcb8e dpp-nfc: Do not allow more than one alternative channel proposal
6eaee933d dpp-nfc: Add test mode for negotiated connection handover
730fc307b Update documentation for vendor attributes to ignore BSSIDs during roaming
f4877083e Rename driver op for temporarily disallowed BSSIDs
f8c756c5b FT: Rename temporary blocking of nonresponsive R0KH
15018d4f4 DPP2: Fix auth termination after receiving Configurator backup
74cd38ac6 dpp-nfc: Return failure status if operation fails
7e2edfbc1 dpp-nfc: Add color and details for interactive operations
09c22bb78 dpp-nfc: Fix regression in NFC Tag writing
1e4a42c74 dpp-nfc: Detect a non-NDEF tag when trying to write
288c0ffaa dpp-nfc: Do not hardcode netrole for NFC Tag writing cases
ebd5e764f Vendor attribute to configure QoS/AC upgrade for UDP frames
d91fb3ce3 Add a vendor command to fetch the currently enabled band(s)
29e47c416 Vendor command to configure TWT
8f396ad68 Enhance the qca_set_band enum values to be used as a bitmap
cc6153a8a nl80211: Fix sending proper VLAN ID attr value when using VLAN offload
a57f98754 Fix enabling 40/80 MHz bandwidth support in the 6 GHz band
885097125 mesh: Fix peer link counting when removing a mesh peer
8632dea4a DPP2: Make sure dpp_auth gets cleared with external config processing
a7ae42296 DPP2: Do not allow reconfiguration to be started with pending auth
d93df9989 DPP2: Debug print reason for rejecting reconfiguration
5d8c5f344 SAE-PK: Fix password validation check for Sec
0ce6883f6 tests: Fix SAE-PK password module tests
c9dc075fc dpp-nfc: Fix connection handover renegotiation
d0819a11c FILS: Use FILS auth alg when connecting using PMKSA caching
70b80c31f nl80211: Do not send FILS ERP sequence number without rRK
52a325762 6 GHz: Change 6 GHz channels per IEEE P802.11ax/D6.1
5908fedc1 dpp-nfc: Support channel list negotiation
eddf22e1f dpp-nfc: Update debug print for tag-read-only operation
b62e46f69 DPP2: Fix DPP_CA_SET processing with authentication not having peer BI
4f4a52c3c DPP: Clear bootstrap entries only after clearing authentication state
67efd19e0 nl80211: Use control port TX (status) in AP mode if possible
569497bf4 nl80211: Work around misdelivered control port TX status
87065881b nl80211: Use ext ack handler for TX control port
6f19cc4d7 nl80211: Handle control port TX status events over nl80211
f7c657b79 nl80211: Add custom ack handler arguments to send_and_recv()
73ea1ad7f nl80211: Clean up SO_WIFI_STATUS error reporting
cd99a8c43 EAP-TEAP (server): Allow Phase 2 skip based on client certificate
519629392 EAP-TEAP (client): Allow Phase 2 to be skipped if certificate is used
9593ce658 OpenSSL: Provide access to peer subject and own certificate use
b5dab03a1 Convert int to bool for throughput estimate tables
b97aa038b Add WPA_EVENT_{DO,SKIP}_ROAM events
d6b450e89 Refactor wpa_supplicant_need_to_roam()
2ff5a1fdb Use lookup-table instead of macro for TX rate estimates
fa09b85c4 DPP2: Remove forgetten development time debug prints
0bbab6465 DPP2: Fix dot1x config object parsing without trustedEapServerName
8f88dcf05 DPP2: Add an automatic peer_bi entry for CSR matching if needed
b25ddfe9d DPP2: Add Enrollee name into CSR as the commonName
11aa77e00 DPP2: GAS comeback response processing for Enrollee over TCP
18e013a93 DPP2: GAS comeback request processing for Configurator over TCP
68d9586a4 DPP2: GAS Comeback Request for the TCP case
a352c7230 DPP2: Comeback delay response for certificate in over TCP case
0f9463d6e DPP2: CSR wait in Configurator when using TCP
1f86b2c24 DPP2: CSR generation in TCP Client/Enrollee
697fa0c4b DPP2: Do not try to proceed with GAS client if CSR building fails
ffc8ae507 Define a new QCA vendor attribute for Optimized Power Management
3a3eded0d DPP2: Allow CSR processing by CA/RA to reject configuration
3b60f1174 DPP2: Validate CSR on Configurator before forwarding to CA/RA
c98db9f1f DPP2: Add challengePassword into CSR
dbbb0d5b8 OpenSSL: Use EVP-based interface for ECDSA sign/verify
ace3723d9 DPP2: Enterprise provisioning (Enrollee)
6568e5d20 DPP2: Enterprise provisioning (Configurator)
4643b2fee DPP2: Enterprise provisioning definitions for dot1x AKM
812d52ae2 OpenSSL: Support EC key from private_key blob
4b834df5e OpenSSL: Support PEM encoded chain from client_cert blob
68ac45d53 GAS server: Support comeback delay from the request handler
608adae5b JSON: Add base64 helper functions
c7e6dbdad base64: Add no-LF variant for encoding
6dc2c0118 Update DFS terminology in attribute value documentation
621745917 Allow HE-without-VHT to add the Channel Switch Wrapper element
d51b1b7a6 Move hostapd_eid_wb_chsw_wrapper() to non-VHT-specific file
1f72bbbef AP: Reject association request upon invalid HE capabilities
088bef178 AP: Restrict Vendor VHT to 2.4 GHz only
6a34bd300 HE: Use device HE capability instead of HT/VHT for 6 GHz IEs
9272ebae8 nl80211: Fetch HE 6 GHz capability from the driver
f25c51a9f Sync with mac80211-next.git include/uapi/linux/nl80211.h
518be614f SAE-PK: Advertise RSNXE capability bit in STA mode
a77d6d220 SAE-PK: Update SAE confirm IE design
363dbf1ec SAE-PK: Remove requirement of SAE group matching SAE-PK (K_AP) group
2e80aeae4 WPS UPnP: Support build on OS X
f119f8a04 WPS UPnP: Fix FreeBSD build
cc2d03601 HS 2.0: Use global pmf=2 for the created network block
790026c3d Allow TX queue parameters to be configured for wpa_supplicant AP/P2P GO
c7cb42d53 Remove unused enum values
411e42673 Move local TX queue parameter parser into a common file
fcef598ea Do not try to connect with zero-length SSID
85aac526a WPS UPnP: Handle HTTP initiation failures for events more properly
f7d268864 WPS UPnP: Fix event message generation using a long URL path
5b78c8f96 WPS UPnP: Do not allow event subscriptions with URLs to other networks
e30dcda3b SAE-PK: Fix FILS Public Key element Key Type for ECDSA
4c3fbb234 SAE-PK: Check minimum password length more accurate
43a191b89 tests: Remove too short SAE-PK passwords
4ff0df39e SAE-PK: Testing functionality to allow behavior overrides
0c4ffce46 Allow transition_disable updates during the lifetime of a BSS
5f48d36b4 SAE-PK: Select SAE-PK network over SAE without PK
d654ca24d Clean up wpa_scan_res_match()
9ad010c29 SAE-PK: Allow automatic SAE-PK to be disabled
85ca13ebc wpa_cli: Add all_bss command to print all scan results (BSS entries)
215b4d8a7 FT: Do not add PMKID to the driver for FT-EAP if caching is disabled
5cf91afee QCA vendor attribute for dynamic bandwidth adjustment
1a28589b2 QCA vendor attributes for setting channel width
63653307d Add support for indicating missing driver AKM capability flags
18f3f99ac Add vendor attributes to configure testing functionality for FT/OCV/SAE
e53756a64 Fix a typo vendor attribute documentation
960e8e533 QCA vendor attribute to configure NSS
8d1cbaaff SAE-PK: Transition mode disabled indication processing
a75269529 SAE: Add sae_h2e and sae_pk to wpa_supplicant STATUS command
cc22fb1b8 SAE: Move H2E and PK flags to main sae_data
bc908daac Document more network profile parameters
1c846d647 SAE-PK: Allow SAE authentication without PK to be disabled
40240735b WPS UPnP: Do not update Beacon frames unnecessarily on subscription removal
c85b39ec5 SAE-PK: Increment the minimum password length to 9
2c7b5a2c5 tests: Skip too short SAE-PK passwords in positive testing
d777156e1 SAE-PK: Determine hash algorithm from K_AP group instead of SAE group
fb09ec87f SAE-PK: A tool for generating SAE-PK Modifier and password
b6bcd74e5 Show SAE capabilities in control interface
9bf576870 Show SAE flags in scan results
e7aeb6d8a SAE-PK: STA functionality
20ccf97b3 SAE-PK: AP functionality
00e4fbdcc tests: Module test for SAE-PK
6b9e99e57 SAE-PK: Extend SAE functionality for AP validation
b6dcbd01a SAE-PK: Identifier definitions
aed01b82d OpenSSL: Additional EC functionality for SAE-PK
8c1f61e82 OCV: Report OCI validation failures with OCV-FAILURE messages (STA)
661e66118 OCV: Allow OCI channel to be overridden for testing (AP)
d10a57f6e DPP2: Derive a separate key for enveloped data
32d3360f3 DPP: Fix a typo in a comment
5a7bcb772 OSEN: Do not send the actual BIGTK to OSEN STAs
2d6cc0e67 FT: Do not expose GTK/IGTK in FT Reassociation Response frame in OSEN
a99833789 WNM: Do not expose GTK/IGTK in WNM Sleep Mode Response frame in OSEN
d578e890e OWE: Skip beacon update of transition BSS if it is not yet enabled
88436baaa Add a vendor attribute to get OEM data
3f9a89ca1 Vendor attributes for configuring LDPC, TX STBC, RX STBC
8ee0bc622 OCV: Disconnect STAs that do not use SA Query after CSA
01ceb88c7 OCV: Report validation errors for (Re)Association Request frames
a3556d581 OCV: Report validation errors for EAPOL-Key messages in AP mode
d52067a5b OCV: Report validation errors for SA Query Request/Response in AP mode
52579be86 OCV: Move "OCV failed" prefix to callers
2d118f557 OCV: Add support to override channel info OCI element (STA)
c2080e865 Clear current PMKSA cache selection on association/roam
d9532eb70 Debug print PMK-R0/R1 and PMKR0/R1Name in the helper functions
5ab8ad4cf Vendor attributes for ssetting TX A-MSDU and RX A-MSDU parameters
f7a904a28 QCA vendor command for adding and deleting TSPEC
82867456e Vendor attributes to configure PMF protection and disassoc Tx for testing
e5e275745 Add QCA vendor interface support to configure PHY modes
db0d0b84a nl80211: Control the registration for RRM frame with driver_param
Change-Id: I07d9feb8f019a22917ffc0088126c04b7d80115a
diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index e599b8d..eb6a2c1 100644
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -1,7 +1,7 @@
/*
* Qualcomm Atheros OUI and vendor specific assignments
* Copyright (c) 2014-2017, Qualcomm Atheros, Inc.
- * Copyright (c) 2018-2019, The Linux Foundation
+ * Copyright (c) 2018-2020, The Linux Foundation
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
@@ -174,6 +174,22 @@
* to notify the connected station's status. The attributes for this
* command are defined in enum qca_wlan_vendor_attr_link_properties.
*
+ * @QCA_NL80211_VENDOR_SUBCMD_SETBAND: Command to configure the enabled band(s)
+ * to the driver. This command sets the band(s) through either the
+ * attribute QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE or
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_MASK (or both).
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE refers enum qca_set_band as unsigned
+ * integer values and QCA_WLAN_VENDOR_ATTR_SETBAND_MASK refers it as 32
+ * bit unsigned bitmask values. The allowed values for
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE are limited to QCA_SETBAND_AUTO,
+ * QCA_SETBAND_5G, and QCA_SETBAND_2G. Other values/bitmasks are valid for
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_MASK. The attribute
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE is deprecated and the recommendation
+ * is to use the QCA_WLAN_VENDOR_ATTR_SETBAND_MASK. If the both attributes
+ * are included for backwards compatibility, the configurations through
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_MASK will take the precedence with drivers
+ * that support both attributes.
+ *
* @QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY: This command is used to configure
* DFS policy and channel hint for ACS operation. This command uses the
* attributes defined in enum qca_wlan_vendor_attr_acs_config and
@@ -646,6 +662,44 @@
* code immediately prior to triggering cfg80211_disconnected(). The
* attributes used with this event are defined in enum
* qca_wlan_vendor_attr_driver_disconnect_reason.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC: This vendor subcommand is used to
+ * add/delete TSPEC for each AC. One command is for one specific AC only.
+ * This command can only be used in STA mode and the STA must be
+ * associated with an AP when the command is issued. Uses attributes
+ * defined in enum qca_wlan_vendor_attr_config_tspec.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT: Vendor subcommand to configure TWT.
+ * Uses attributes defined in enum qca_wlan_vendor_attr_config_twt.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GETBAND: Command to get the enabled band(s) from
+ * the driver. The band configurations obtained are referred through
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_MASK.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_MEDIUM_ASSESS: Vendor subcommand/event for medium
+ * assessment.
+ * Uses attributes defined in enum qca_wlan_vendor_attr_medium_assess.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_UPDATE_SSID: This acts as a vendor event and is
+ * used to update SSID information in hostapd when it is updated in the
+ * driver. Uses the attribute NL80211_ATTR_SSID.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_WIFI_FW_STATS: This vendor subcommand is used by
+ * the driver to send opaque data from the firmware to userspace. The
+ * driver sends an event to userspace whenever such data is received from
+ * the firmware.
+ *
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA is used as the attribute to
+ * send this opaque data for this event.
+ *
+ * The format of the opaque data is specific to the particular firmware
+ * version and there is no guarantee of the format remaining same.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_MBSSID_TX_VDEV_STATUS: This acts as an event.
+ * The host driver selects Tx VDEV, and notifies user. The attributes
+ * used with this event are defined in enum
+ * qca_wlan_vendor_attr_mbssid_tx_vdev_status.
+ *
*/
enum qca_nl80211_vendor_subcmds {
QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
@@ -825,6 +879,13 @@
QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS_EVENT = 187,
QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO = 188,
QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON = 189,
+ QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC = 190,
+ QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT = 191,
+ QCA_NL80211_VENDOR_SUBCMD_GETBAND = 192,
+ QCA_NL80211_VENDOR_SUBCMD_MEDIUM_ASSESS = 193,
+ QCA_NL80211_VENDOR_SUBCMD_UPDATE_SSID = 194,
+ QCA_NL80211_VENDOR_SUBCMD_WIFI_FW_STATS = 195,
+ QCA_NL80211_VENDOR_SUBCMD_MBSSID_TX_VDEV_STATUS = 196,
};
enum qca_wlan_vendor_attr {
@@ -855,7 +916,11 @@
QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_2_4_BAND = 10,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11,
- /* Unsigned 32-bit value from enum qca_set_band. */
+ /* Unsigned 32-bit value from enum qca_set_band. The allowed values for
+ * this attribute are limited to QCA_SETBAND_AUTO, QCA_SETBAND_5G, and
+ * QCA_SETBAND_2G. This attribute is deprecated. Recommendation is to
+ * use QCA_WLAN_VENDOR_ATTR_SETBAND_MASK instead.
+ */
QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12,
/* Dummy (NOP) attribute for 64 bit padding */
QCA_WLAN_VENDOR_ATTR_PAD = 13,
@@ -1018,6 +1083,15 @@
*/
QCA_WLAN_VENDOR_ATTR_FW_STATE = 42,
+ /* Unsigned 32-bitmask value from enum qca_set_band. Substitutes the
+ * attribute QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE for which only a subset
+ * of single values from enum qca_set_band are valid. This attribute
+ * uses bitmask combinations to define the respective allowed band
+ * combinations and this attributes takes precedence over
+ * QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE if both attributes are included.
+ */
+ QCA_WLAN_VENDOR_ATTR_SETBAND_MASK = 43,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1,
@@ -1565,9 +1639,10 @@
};
enum qca_set_band {
- QCA_SETBAND_AUTO,
- QCA_SETBAND_5G,
- QCA_SETBAND_2G,
+ QCA_SETBAND_AUTO = 0,
+ QCA_SETBAND_5G = BIT(0),
+ QCA_SETBAND_2G = BIT(1),
+ QCA_SETBAND_6G = BIT(2),
};
/**
@@ -1695,6 +1770,8 @@
* (not including the Element ID Extension field). Please note that the
* draft is still work in progress and this element payload is subject to
* change.
+ *
+ * @QCA_VENDOR_ELEM_ALLPLAY: Allplay element
*/
enum qca_vendor_element_id {
QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST = 0,
@@ -1703,6 +1780,7 @@
QCA_VENDOR_ELEM_RAPS = 3,
QCA_VENDOR_ELEM_MU_EDCA_PARAMS = 4,
QCA_VENDOR_ELEM_BSS_COLOR_CHANGE = 5,
+ QCA_VENDOR_ELEM_ALLPLAY = 6,
};
/**
@@ -2120,6 +2198,141 @@
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_ROAM_REASON = 61,
+ /* 32-bit unsigned value to configure different PHY modes to the
+ * driver/firmware. The possible values are defined in
+ * enum qca_wlan_vendor_phy_mode. The configuration will be reset to
+ * default value, i.e., QCA_WLAN_VENDOR_PHY_MODE_AUTO upon restarting
+ * the driver.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_PHY_MODE = 62,
+
+ /* 8-bit unsigned value to configure the maximum supported channel width
+ * for STA mode. If this value is configured when STA is in connected
+ * state, it should not exceed the negotiated channel width. If it is
+ * configured when STA is in disconnected state, the configured value
+ * will take effect for the next immediate connection.
+ * Possible values are:
+ * NL80211_CHAN_WIDTH_20
+ * NL80211_CHAN_WIDTH_40
+ * NL80211_CHAN_WIDTH_80
+ * NL80211_CHAN_WIDTH_80P80
+ * NL80211_CHAN_WIDTH_160
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_WIDTH = 63,
+
+ /* 8-bit unsigned value to enable/disable dynamic bandwidth adjustment.
+ * This attribute is only applicable for STA mode. When dynamic
+ * bandwidth adjustment is disabled, STA will use static channel width
+ * the value of which is negotiated during connection.
+ * 1-enable (default), 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_DYNAMIC_BW = 64,
+
+ /* 8-bit unsigned value to configure the maximum number of subframes of
+ * TX MSDU for aggregation. Possible values are 0-31. When set to 0,
+ * it is decided by the hardware.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MSDU_AGGREGATION = 65,
+
+ /* 8-bit unsigned value to configure the maximum number of subframes of
+ * RX MSDU for aggregation. Possible values are 0-31. When set to 0,
+ * it is decided by the hardware.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MSDU_AGGREGATION = 66,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically
+ * enable/disable the LDPC capability of the device. When configured in
+ * the disconnected state, the updated configuration will be considered
+ * for the immediately following connection attempt. If this
+ * configuration is modified while the device is in the connected state,
+ * the LDPC TX will be updated with this configuration immediately,
+ * while the LDPC RX configuration update will take place starting from
+ * the subsequent association attempt.
+ * 1-Enable, 0-Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_LDPC = 67,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically
+ * enable/disable the TX STBC capability of the device. When configured
+ * in the disconnected state, the updated configuration will be
+ * considered for the immediately following connection attempt. If the
+ * connection is formed with TX STBC enabled and if this configuration
+ * is disabled during that association, the TX will be impacted
+ * immediately. Further connection attempts will disable TX STBC.
+ * However, enabling the TX STBC for a connected session with disabled
+ * capability is not allowed and will fail.
+ * 1-Enable, 0-Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_STBC = 68,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically
+ * enable/disable the RX STBC capability of the device. When configured
+ * in the disconnected state, the updated configuration will be
+ * considered for the immediately following connection attempt. If the
+ * configuration is modified in the connected state, there will be no
+ * impact for the current association, but further connection attempts
+ * will use the updated configuration.
+ * 1-Enable, 0-Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_STBC = 69,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically configure
+ * the number of spatial streams. When configured in the disconnected
+ * state, the updated configuration will be considered for the
+ * immediately following connection attempt. If the NSS is updated after
+ * the connection, the updated NSS value is notified to the peer using
+ * the Operating Mode Notification/Spatial Multiplexing Power Save
+ * frame. The updated NSS value after the connection shall not be
+ * greater than the one negotiated during the connection. Any such
+ * higher value configuration shall be returned with a failure.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_NSS = 70,
+ /* 8-bit unsigned value to trigger Optimized Power Management:
+ * 1-Enable, 0-Disable
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_OPTIMIZED_POWER_MANAGEMENT = 71,
+
+ /* 8-bit unsigned value. This attribute takes the QoS/access category
+ * value represented by the enum qca_wlan_ac_type and expects the driver
+ * to upgrade the UDP frames to this access category. The value of
+ * QCA_WLAN_AC_ALL is invalid for this attribute. This will override the
+ * DSCP value configured in the frame with the intention to only upgrade
+ * the access category. That said, it is not intended to downgrade the
+ * access category for the frames.
+ * Set the value to QCA_WLAN_AC_BK if the QoS upgrade needs to be
+ * disabled, as BK is of the lowest priority and an upgrade to it does
+ * not result in any changes for the frames.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_UDP_QOS_UPGRADE = 72,
+
+ /* 8-bit unsigned value. This attribute is used to dynamically configure
+ * the number of chains to be used for transmitting data. This
+ * configuration is allowed only when in connected state and will be
+ * effective until disconnected. The driver rejects this configuration
+ * if the number of spatial streams being used in the current connection
+ * cannot be supported by this configuration.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_NUM_TX_CHAINS = 73,
+ /* 8-bit unsigned value. This attribute is used to dynamically configure
+ * the number of chains to be used for receiving data. This
+ * configuration is allowed only when in connected state and will be
+ * effective until disconnected. The driver rejects this configuration
+ * if the number of spatial streams being used in the current connection
+ * cannot be supported by this configuration.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_NUM_RX_CHAINS = 74,
+
+ /* 8-bit unsigned value to configure ANI setting type.
+ * See &enum qca_wlan_ani_setting for possible values.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANI_SETTING = 75,
+ /* 32-bit signed value to configure ANI level. This is used when
+ * ANI settings type is &QCA_WLAN_ANI_SETTING_FIXED.
+ * The set and get of ANI level with &QCA_WLAN_ANI_SETTING_AUTO
+ * is invalid, the driver will return a failure.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANI_LEVEL = 76,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =
@@ -2135,6 +2348,16 @@
QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_REPORT_FAIL
/**
+ * enum qca_wlan_ani_setting - ANI setting type
+ * @QCA_WLAN_ANI_SETTING_AUTO: Automatically determine ANI level
+ * @QCA_WLAN_ANI_SETTING_FIXED: Fix ANI level to the dBm parameter
+ */
+enum qca_wlan_ani_setting {
+ QCA_WLAN_ANI_SETTING_AUTO = 0,
+ QCA_WLAN_ANI_SETTING_FIXED = 1,
+};
+
+/**
* enum qca_wlan_vendor_attr_sap_config - Parameters for AP configuration
*
* @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL: Optional (u8)
@@ -2189,19 +2412,54 @@
/**
* enum qca_wlan_gpio_attr - Parameters for GPIO configuration
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND: Required (u32)
+ * value to specify the GPIO command. Please refer to enum qca_gpio_cmd_type
+ * for the available values.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM: Required (u32)
+ * value to specify the GPIO number.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG or %QCA_WLAN_VENDOR_GPIO_OUTPUT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE: Required (u32)
+ * value to specify the GPIO output level. Please refer to enum qca_gpio_value
+ * for the available values.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_OUTPUT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE: Required (u32)
+ * value to specify the GPIO pull type. Please refer to enum qca_gpio_pull_type
+ * for the available values.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE: Required (u32)
+ * value to specify the GPIO interrupt mode. Please refer to enum
+ * qca_gpio_interrupt_mode for the available values.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DIR: Required (u32)
+ * value to specify the GPIO direction. Please refer to enum qca_gpio_direction
+ * for the available values.
+ * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG.
*/
enum qca_wlan_gpio_attr {
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INVALID = 0,
/* Unsigned 32-bit attribute for GPIO command */
- QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND,
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND = 1,
/* Unsigned 32-bit attribute for GPIO PIN number to configure */
- QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM,
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM = 2,
/* Unsigned 32-bit attribute for GPIO value to configure */
- QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE,
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE = 3,
/* Unsigned 32-bit attribute for GPIO pull type */
- QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE,
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE = 4,
/* Unsigned 32-bit attribute for GPIO interrupt mode */
- QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE,
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE = 5,
+ /* Unsigned 32-bit attribute for GPIO direction to configure */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DIR = 6,
/* keep last */
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST,
@@ -2210,6 +2468,73 @@
};
/**
+ * enum gpio_cmd_type - GPIO configuration command type
+ * @QCA_WLAN_VENDOR_GPIO_CONFIG: Set GPIO configuration info
+ * @QCA_WLAN_VENDOR_GPIO_OUTPUT: Set GPIO output level
+ */
+enum qca_gpio_cmd_type {
+ QCA_WLAN_VENDOR_GPIO_CONFIG = 0,
+ QCA_WLAN_VENDOR_GPIO_OUTPUT = 1,
+};
+
+/**
+ * enum qca_gpio_pull_type - GPIO pull type
+ * @QCA_WLAN_GPIO_PULL_NONE: Set GPIO pull type to none
+ * @QCA_WLAN_GPIO_PULL_UP: Set GPIO pull up
+ * @QCA_WLAN_GPIO_PULL_DOWN: Set GPIO pull down
+ */
+enum qca_gpio_pull_type {
+ QCA_WLAN_GPIO_PULL_NONE = 0,
+ QCA_WLAN_GPIO_PULL_UP = 1,
+ QCA_WLAN_GPIO_PULL_DOWN = 2,
+ QCA_WLAN_GPIO_PULL_MAX,
+};
+
+/**
+ * enum qca_gpio_direction - GPIO direction
+ * @QCA_WLAN_GPIO_INPUT: Set GPIO as input mode
+ * @QCA_WLAN_GPIO_OUTPUT: Set GPIO as output mode
+ * @QCA_WLAN_GPIO_VALUE_MAX: Invalid value
+ */
+enum qca_gpio_direction {
+ QCA_WLAN_GPIO_INPUT = 0,
+ QCA_WLAN_GPIO_OUTPUT = 1,
+ QCA_WLAN_GPIO_DIR_MAX,
+};
+
+/**
+ * enum qca_gpio_value - GPIO Value
+ * @QCA_WLAN_GPIO_LEVEL_LOW: set gpio output level to low
+ * @QCA_WLAN_GPIO_LEVEL_HIGH: set gpio output level to high
+ * @QCA_WLAN_GPIO_LEVEL_MAX: Invalid value
+ */
+enum qca_gpio_value {
+ QCA_WLAN_GPIO_LEVEL_LOW = 0,
+ QCA_WLAN_GPIO_LEVEL_HIGH = 1,
+ QCA_WLAN_GPIO_LEVEL_MAX,
+};
+
+/**
+ * enum gpio_interrupt_mode - GPIO interrupt mode
+ * @QCA_WLAN_GPIO_INTMODE_DISABLE: Disable interrupt trigger
+ * @QCA_WLAN_GPIO_INTMODE_RISING_EDGE: Interrupt with GPIO rising edge trigger
+ * @QCA_WLAN_GPIO_INTMODE_FALLING_EDGE: Interrupt with GPIO falling edge trigger
+ * @QCA_WLAN_GPIO_INTMODE_BOTH_EDGE: Interrupt with GPIO both edge trigger
+ * @QCA_WLAN_GPIO_INTMODE_LEVEL_LOW: Interrupt with GPIO level low trigger
+ * @QCA_WLAN_GPIO_INTMODE_LEVEL_HIGH: Interrupt with GPIO level high trigger
+ * @QCA_WLAN_GPIO_INTMODE_MAX: Invalid value
+ */
+enum qca_gpio_interrupt_mode {
+ QCA_WLAN_GPIO_INTMODE_DISABLE = 0,
+ QCA_WLAN_GPIO_INTMODE_RISING_EDGE = 1,
+ QCA_WLAN_GPIO_INTMODE_FALLING_EDGE = 2,
+ QCA_WLAN_GPIO_INTMODE_BOTH_EDGE = 3,
+ QCA_WLAN_GPIO_INTMODE_LEVEL_LOW = 4,
+ QCA_WLAN_GPIO_INTMODE_LEVEL_HIGH = 5,
+ QCA_WLAN_GPIO_INTMODE_MAX,
+};
+
+/**
* qca_wlan_set_qdepth_thresh_attr - Parameters for setting
* MSDUQ depth threshold per peer per tid in the target
*
@@ -3297,7 +3622,7 @@
QCA_WLAN_VENDOR_ATTR_LL_STATS_NUM_RADIOS = 66,
/* Signifies the nested list of channel attributes
- * QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_*
+ * QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_*
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO = 67,
@@ -3359,6 +3684,17 @@
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_PENDING_MSDU = 83,
+ /* u32 value representing total time in milliseconds for which the radio
+ * is transmitting on this channel. This attribute will be nested
+ * within QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_TX_TIME = 84,
+ /* u32 value representing total time in milliseconds for which the radio
+ * is receiving all 802.11 frames intended for this device on this
+ * channel. This attribute will be nested within
+ * QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_RX_TIME = 85,
/* keep last */
QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_LL_STATS_MAX =
@@ -3706,6 +4042,30 @@
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_SCHEME_AFTER_LAST - 1,
};
+/**
+ * enum qca_roam_scan_scheme: Scan scheme
+ *
+ * @QCA_ROAM_SCAN_SCHEME_NO_SCAN: No frequencies specified to scan.
+ * Indicates the driver to not scan on a Roam Trigger scenario, but
+ * disconnect. E.g., on a BTM request from the AP the driver/firmware shall
+ * disconnect from the current connected AP by notifying a failure
+ * code in the BTM response.
+ *
+ * @QCA_ROAM_SCAN_SCHEME_PARTIAL_SCAN: Indicates the driver/firmware to
+ * trigger partial frequency scans. These frequencies are the ones learned
+ * or maintained by the driver based on the probability of finding the
+ * BSSIDs in the ESS for which the roaming is triggered.
+ *
+ * @QCA_ROAM_SCAN_SCHEME_FULL_SCAN: Indicates the driver/firmware to
+ * trigger the scan on all the valid frequencies to find better
+ * candidates to roam.
+ */
+enum qca_roam_scan_scheme {
+ QCA_ROAM_SCAN_SCHEME_NO_SCAN = 0,
+ QCA_ROAM_SCAN_SCHEME_PARTIAL_SCAN = 1,
+ QCA_ROAM_SCAN_SCHEME_FULL_SCAN = 2,
+};
+
/*
* enum qca_vendor_roam_triggers: Bitmap of roaming triggers
*
@@ -3726,6 +4086,18 @@
* when BTM Request frame is received from the connected AP.
* @QCA_ROAM_TRIGGER_REASON_BSS_LOAD: Set if the roam has to be triggered
* when the channel utilization is goes above the configured threshold.
+ * @QCA_ROAM_TRIGGER_REASON_USER_TRIGGER: Set if the roam has to be triggered
+ * based on the request from the user (space).
+ * @QCA_ROAM_TRIGGER_REASON_DEAUTH: Set if the roam has to be triggered when
+ * device receives Deauthentication/Disassociation frame from connected AP.
+ * @QCA_ROAM_TRIGGER_REASON_IDLE: Set if the roam has to be triggered when the
+ * device is in idle state (no TX/RX) and suspend mode, if the current RSSI
+ * is determined to be a poor one.
+ * @QCA_ROAM_TRIGGER_REASON_TX_FAILURES: Set if the roam has to be triggered
+ * based on continuous TX Data frame failures to the connected AP.
+ * @QCA_ROAM_TRIGGER_REASON_EXTERNAL_SCAN: Set if the roam has to be triggered
+ * based on the scan results obtained from an external scan (not triggered
+ * to aim roaming).
*
* Set the corresponding roam trigger reason bit to consider it for roam
* trigger.
@@ -3741,6 +4113,11 @@
QCA_ROAM_TRIGGER_REASON_DENSE = 1 << 5,
QCA_ROAM_TRIGGER_REASON_BTM = 1 << 6,
QCA_ROAM_TRIGGER_REASON_BSS_LOAD = 1 << 7,
+ QCA_ROAM_TRIGGER_REASON_USER_TRIGGER = 1 << 8,
+ QCA_ROAM_TRIGGER_REASON_DEAUTH = 1 << 9,
+ QCA_ROAM_TRIGGER_REASON_IDLE = 1 << 10,
+ QCA_ROAM_TRIGGER_REASON_TX_FAILURES = 1 << 11,
+ QCA_ROAM_TRIGGER_REASON_EXTERNAL_SCAN = 1 << 12,
};
/**
@@ -3897,6 +4274,40 @@
*
* Clears the selection criteria configured in the driver when specified
* with clear command.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME: Unsigned 32-bit value.
+ * Represents value of the scan frequency scheme from enum
+ * qca_roam_scan_scheme.
+ * It's an optional attribute. If this attribute is not configured, the
+ * driver shall proceed with default behavior.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_CONNECTED_RSSI_THRESHOLD: Signed 32-bit value in dBm,
+ * signifying the RSSI threshold of the current connected AP, indicating
+ * the driver to trigger roam only when the current connected AP's RSSI
+ * is less than this threshold.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD: Signed 32-bit value in dBm,
+ * signifying the RSSI threshold of the candidate AP, indicating
+ * the driver to trigger roam only to the candidate AP with RSSI
+ * better than this threshold.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_USER_REASON: Unsigned 32-bit value. Represents the
+ * user defined reason code to be sent to the AP in response to AP's
+ * request to trigger the roam if the roaming cannot be triggered.
+ * Applies to all the scenarios of AP assisted roaming (e.g., BTM).
+ *
+ * @QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS: Unsigned 32-bit value.
+ * Carries a bitmap of the roam triggers specified in
+ * enum qca_vendor_roam_triggers.
+ * Represents the roam triggers for which the specific scan scheme from
+ * enum qca_roam_scan_scheme has to be applied.
+ * It's an optional attribute. If this attribute is not configured, but
+ * QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME is specified, the scan scheme
+ * specified through QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME is applicable for
+ * all the roams.
+ * If both QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME and
+ * QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS are not specified, the
+ * driver shall proceed with the default behavior.
*/
enum qca_vendor_attr_roam_control {
QCA_ATTR_ROAM_CONTROL_ENABLE = 1,
@@ -3907,6 +4318,11 @@
QCA_ATTR_ROAM_CONTROL_FULL_SCAN_PERIOD = 6,
QCA_ATTR_ROAM_CONTROL_TRIGGERS = 7,
QCA_ATTR_ROAM_CONTROL_SELECTION_CRITERIA = 8,
+ QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME = 9,
+ QCA_ATTR_ROAM_CONTROL_CONNECTED_RSSI_THRESHOLD = 10,
+ QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD = 11,
+ QCA_ATTR_ROAM_CONTROL_USER_REASON = 12,
+ QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS = 13,
/* keep last */
QCA_ATTR_ROAM_CONTROL_AFTER_LAST,
@@ -3926,7 +4342,7 @@
* Represents the Request ID for the specific set of commands.
* This also helps to map specific set of commands to the respective
* ID / client. e.g., helps to identify the user entity configuring the
- * Blacklist BSSID and accordingly clear the respective ones with the
+ * ignored BSSIDs and accordingly clear the respective ones with the
* matching ID.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS: Unsigned
@@ -3993,17 +4409,18 @@
* the BSSID for the purpose of comparing it with other roam candidate.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS: Nested attribute,
- * represents the BSSIDs to get blacklisted for roaming.
+ * represents the BSSIDs to get ignored for roaming.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID: Unsigned
- * 32-bit value, represents the number of blacklisted BSSIDs.
+ * 32-bit value, represents the number of ignored BSSIDs.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID: 6-byte MAC
- * address representing the Blacklisted BSSID.
+ * address representing the ignored BSSID.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_HINT: Flag attribute,
- * indicates this BSSID blacklist as a hint to the driver. The driver can
- * select this BSSID in the worst case (when no other BSSIDs are better).
+ * indicates this request to ignore the BSSID as a hint to the driver. The
+ * driver can select this BSSID in the worst case (when no other BSSIDs are
+ * better).
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL: Nested attribute to
* set/get/clear the roam control config as
@@ -4038,11 +4455,11 @@
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID = 16,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER = 17,
- /* Attribute for set_blacklist bssid params */
+ /* Attribute for setting ignored BSSID parameters */
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS = 18,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID = 19,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID = 20,
- /* Flag attribute indicates this BSSID blacklist as a hint */
+ /* Flag attribute indicates this entry as a hint */
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_HINT = 21,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL = 22,
@@ -4078,9 +4495,9 @@
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS to set the BSSID
* preference.
*
- * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID: Sets the Blacklist
- * BSSIDs. Refers QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS to
- * set the same.
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID: Sets the list of BSSIDs
+ * to ignore in roaming decision. Uses
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS to set the list.
*
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET: Command to set the
* roam control config to the driver with the attribute
@@ -4742,9 +5159,9 @@
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_ADHOC = 1 << 6,
/* Station only channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_HOSTAP = 1 << 7,
- /* DFS radar history for slave device (STA mode) */
+ /* DFS radar history for client device (STA mode) */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_HISTORY_RADAR = 1 << 8,
- /* DFS CAC valid for slave device (STA mode) */
+ /* DFS CAC valid for client device (STA mode) */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CAC_VALID = 1 << 9,
};
@@ -6471,8 +6888,9 @@
/**
* enum qca_wlan_vendor_thermal_level - Defines various thermal levels
- * configured by userspace to the driver/firmware. The values will be
- * encapsulated in QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL attribute.
+ * configured by userspace to the driver/firmware.
+ * The values can be encapsulated in QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL or
+ * QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_LEVEL attribute.
* The driver/firmware takes actions requested by userspace such as throttling
* wifi TX etc. in order to mitigate high temperature.
*
@@ -6506,8 +6924,9 @@
*/
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE = 1,
/* Userspace uses this attribute to configure thermal level to the
- * driver/firmware. Used in request, u32 attribute, possible values
- * are defined in enum qca_wlan_vendor_thermal_level.
+ * driver/firmware, or get thermal level from the driver/firmware.
+ * Used in request or response, u32 attribute,
+ * possible values are defined in enum qca_wlan_vendor_thermal_level.
*/
QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL = 2,
/* Userspace uses this attribute to configure the time in which the
@@ -6545,6 +6964,9 @@
* resume action.
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL: Configure thermal level to
* the driver/firmware.
+ * @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_LEVEL: Request to get the current
+ * thermal level from the driver/firmware. The driver should respond with a
+ * thermal level defined in enum qca_wlan_vendor_thermal_level.
*/
enum qca_wlan_vendor_attr_thermal_cmd_type {
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_PARAMS,
@@ -6552,6 +6974,7 @@
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SUSPEND,
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_RESUME,
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_LEVEL,
};
/**
@@ -6634,6 +7057,11 @@
* NLA_FLAG attribute.
*/
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_RESUME_COMPLETE,
+ /* Thermal level from the driver.
+ * u32 attribute. Possible values are defined in
+ * enum qca_wlan_vendor_thermal_level.
+ */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_LEVEL = 3,
/* keep last */
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_AFTER_LAST,
@@ -6847,6 +7275,72 @@
QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST - 1,
};
+ /**
+ * enum qca_wlan_vendor_phy_mode - Different PHY modes
+ * These values are used with %QCA_WLAN_VENDOR_ATTR_CONFIG_PHY_MODE.
+ *
+ * @QCA_WLAN_VENDOR_PHY_MODE_AUTO: autoselect
+ * @QCA_WLAN_VENDOR_PHY_MODE_2G_AUTO: 2.4 GHz 802.11b/g/n/ax autoselect
+ * @QCA_WLAN_VENDOR_PHY_MODE_5G_AUTO: 5 GHz 802.11a/n/ac/ax autoselect
+ * @QCA_WLAN_VENDOR_PHY_MODE_11A: 5 GHz, OFDM
+ * @QCA_WLAN_VENDOR_PHY_MODE_11B: 2.4 GHz, CCK
+ * @QCA_WLAN_VENDOR_PHY_MODE_11G: 2.4 GHz, OFDM
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AGN: Support 802.11n in both 2.4 GHz and 5 GHz
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NG_HT20: 2.4 GHz, HT20
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40PLUS: 2.4 GHz, HT40 (ext ch +1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40MINUS: 2.4 GHz, HT40 (ext ch -1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40: 2.4 GHz, Auto HT40
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NA_HT20: 5 GHz, HT20
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40PLUS: 5 GHz, HT40 (ext ch +1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40MINUS: 5 GHz, HT40 (ext ch -1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40: 5 GHz, Auto HT40
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT20: 5 GHz, VHT20
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40PLUS: 5 GHz, VHT40 (Ext ch +1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40MINUS: 5 GHz VHT40 (Ext ch -1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40: 5 GHz, VHT40
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT80: 5 GHz, VHT80
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT80P80: 5 GHz, VHT80+80
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT160: 5 GHz, VHT160
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE20: HE20
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40: HE40
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40PLUS: HE40 (ext ch +1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40MINUS: HE40 (ext ch -1)
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE80: HE80
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE80P80: HE 80P80
+ * @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE160: HE160
+ */
+enum qca_wlan_vendor_phy_mode {
+ QCA_WLAN_VENDOR_PHY_MODE_AUTO = 0,
+ QCA_WLAN_VENDOR_PHY_MODE_2G_AUTO = 1,
+ QCA_WLAN_VENDOR_PHY_MODE_5G_AUTO = 2,
+ QCA_WLAN_VENDOR_PHY_MODE_11A = 3,
+ QCA_WLAN_VENDOR_PHY_MODE_11B = 4,
+ QCA_WLAN_VENDOR_PHY_MODE_11G = 5,
+ QCA_WLAN_VENDOR_PHY_MODE_11AGN = 6,
+ QCA_WLAN_VENDOR_PHY_MODE_11NG_HT20 = 7,
+ QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40PLUS = 8,
+ QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40MINUS = 9,
+ QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40 = 10,
+ QCA_WLAN_VENDOR_PHY_MODE_11NA_HT20 = 11,
+ QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40PLUS = 12,
+ QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40MINUS = 13,
+ QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40 = 14,
+ QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT20 = 15,
+ QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40PLUS = 16,
+ QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40MINUS = 17,
+ QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40 = 18,
+ QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT80 = 19,
+ QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT80P80 = 20,
+ QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT160 = 21,
+ QCA_WLAN_VENDOR_PHY_MODE_11AX_HE20 = 22,
+ QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40 = 23,
+ QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40PLUS = 24,
+ QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40MINUS = 25,
+ QCA_WLAN_VENDOR_PHY_MODE_11AX_HE80 = 26,
+ QCA_WLAN_VENDOR_PHY_MODE_11AX_HE80P80 = 27,
+ QCA_WLAN_VENDOR_PHY_MODE_11AX_HE160 = 28,
+};
+
/* Attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION
*/
@@ -7130,6 +7624,67 @@
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TWT_REQ_SUPPORT = 37,
+ /* 8-bit unsigned value to configure protection for Management
+ * frames when PMF is enabled for the association.
+ * This attribute is used to configure the testbed device.
+ * 0-use the correct key, 1-use an incorrect key, 2-disable protection.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_PMF_PROTECTION = 38,
+
+ /* Flag attribute to inject Disassociation frame to the connected AP.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_DISASSOC_TX = 39,
+
+ /* 8-bit unsigned value to configure an override for the RSNXE Used
+ * subfield in the MIC control field of the FTE in FT Reassociation
+ * Request frame.
+ * 0 - Default behavior, 1 - override with 1, 2 - override with 0.
+ * This attribute is used to configure the testbed device.
+ * This attribute can be configured only when STA is in associated state
+ * and the configuration is valid until the disconnection.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FT_REASSOCREQ_RSNXE_USED = 40,
+
+ /* 8-bit unsigned value to configure the driver to ignore CSA (Channel
+ * Switch Announcement) when STA is in connected state.
+ * 0 - Default behavior, 1 - Ignore CSA.
+ * This attribute is used to configure the testbed device.
+ * This attribute can be configured only when STA is in associated state
+ * and the configuration is valid until the disconnection.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_IGNORE_CSA = 41,
+
+ /* Nested attribute values required to configure OCI (Operating Channel
+ * Information). Attributes defined in enum
+ * qca_wlan_vendor_attr_oci_override are nested within this attribute.
+ * This attribute is used to configure the testbed device.
+ * This attribute can be configured only when STA is in associated state
+ * and the configuration is valid until the disconnection.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OCI_OVERRIDE = 42,
+
+ /* 8-bit unsigned value to configure the driver/firmware to ignore SA
+ * Query timeout. If this configuration is enabled STA shall not send
+ * Deauthentication frmae when SA Query times out (mainly, after a
+ * channel switch when OCV is enabled).
+ * 0 - Default behavior, 1 - Ignore SA Query timeout.
+ * This attribute is used to configure the testbed device.
+ * This attribute can be configured only when STA is in associated state
+ * and the configuration is valid until the disconnection.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_IGNORE_SA_QUERY_TIMEOUT = 43,
+
+ /* 8-bit unsigned value to configure the driver/firmware to start or
+ * stop transmitting FILS discovery frames.
+ * 0 - Stop transmitting FILS discovery frames
+ * 1 - Start transmitting FILS discovery frames
+ * This attribute is used to configure the testbed device.
+ * This attribute can be configured only in AP mode and the
+ * configuration is valid until AP restart.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FILS_DISCOVERY_FRAMES_TX = 44,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =
@@ -7137,6 +7692,63 @@
};
/**
+ * enum qca_wlan_twt_operation - Operation of the config TWT request
+ * Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION.
+ *
+ * @QCA_WLAN_TWT_SET: Setup a TWT session. Required parameters are configured
+ * through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
+ * qca_wlan_vendor_attr_twt_setup.
+ *
+ * @QCA_WLAN_TWT_GET: Get the configured TWT parameters. Required parameters are
+ * obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
+ * qca_wlan_vendor_attr_twt_setup.
+ *
+ * @QCA_WLAN_TWT_TERMINATE: Terminate the TWT session. Required parameters are
+ * obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
+ * qca_wlan_vendor_attr_twt_setup. Valid only after the TWT session is setup.
+ *
+ * @QCA_WLAN_TWT_SUSPEND: Suspend the TWT session. Required parameters are
+ * obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
+ * qca_wlan_vendor_attr_twt_setup. Valid only after the TWT session is setup.
+ *
+ * @QCA_WLAN_TWT_RESUME: Resume the TWT session. Required parameters are
+ * configured through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
+ * qca_wlan_vendor_attr_twt_resume. Valid only after the TWT session is setup.
+ */
+enum qca_wlan_twt_operation {
+ QCA_WLAN_TWT_SET = 0,
+ QCA_WLAN_TWT_GET = 1,
+ QCA_WLAN_TWT_TERMINATE = 2,
+ QCA_WLAN_TWT_SUSPEND = 3,
+ QCA_WLAN_TWT_RESUME = 4,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_config_twt: Defines attributes used by
+ * %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION: u8 attribute. Specify the TWT
+ * operation of this request. Possible values are defined in enum
+ * qca_wlan_twt_operation. The parameters for the respective operation is
+ * specified through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS: Nested attribute representing the
+ * parameters configured for TWT. These parameters are represented by
+ * enum qca_wlan_vendor_attr_twt_setup or enum qca_wlan_vendor_attr_twt_resume
+ * based on the operation.
+ */
+enum qca_wlan_vendor_attr_config_twt {
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION = 1,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_MAX =
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_AFTER_LAST - 1,
+};
+
+/**
* enum qca_wlan_vendor_attr_bss_filter - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER.
* The user can add/delete the filter by specifying the BSSID/STA MAC address in
@@ -7287,7 +7899,8 @@
* enum qca_wlan_vendor_attr_twt_setup: Represents attributes for
* TWT (Target Wake Time) setup request. These attributes are sent as part of
* %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP and
- * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
+ * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. Also used by
+ * attributes through %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST: Flag attribute.
* Disable (flag attribute not present) - Individual TWT
@@ -7297,10 +7910,13 @@
* STA and AP.
* Broadcast means the session is across multiple STAs and an AP. The
* configuration parameters are announced in Beacon frames by the AP.
+ * This is used in
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE: Required (u8).
* Unsigned 8-bit qca_wlan_vendor_twt_setup_req_type to
- * specify the TWT request type
+ * specify the TWT request type. This is used in TWT SET operation.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER: Flag attribute
* Enable (flag attribute present) - TWT with trigger support.
@@ -7308,40 +7924,113 @@
* Trigger means the AP will send the trigger frame to allow STA to send data.
* Without trigger, the STA will wait for the MU EDCA timer before
* transmitting the data.
+ * This is used in
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE: Required (u8)
* 0 - Announced TWT - In this mode, STA may skip few service periods to
* save more power. If STA wants to wake up, it will send a PS-POLL/QoS
* NULL frame to AP.
* 1 - Unannounced TWT - The STA will wakeup during every SP.
+ * This is a required parameter for
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID: Optional (u8)
* Flow ID is the unique identifier for each TWT session.
- * Currently this is not required and dialog ID will be set to zero.
+ * If not provided then dialog ID will be set to zero.
+ * This is an optional parameter for
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Request and Response
+ * 3. TWT TERMINATE Request and Response
+ * 4. TWT SUSPEND Request and Response
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP: Required (u8)
* This attribute (exp) is used along with the mantissa to derive the
* wake interval using the following formula:
* pow(2,exp) = wake_intvl_us/wake_intvl_mantis
* Wake interval is the interval between 2 successive SP.
+ * This is a required parameter for
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION: Flag attribute
* Enable (flag attribute present) - Protection required.
* Disable (flag attribute not present) - Protection not required.
* If protection is enabled, then the AP will use protection
* mechanism using RTS/CTS to self to reserve the airtime.
+ * This is used in
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME: Optional (u32)
* This attribute is used as the SP offset which is the offset from
* TSF after which the wake happens. The units are in microseconds. If
* this attribute is not provided, then the value will be set to zero.
+ * This is an optional parameter for
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION: Required (u32)
- * This is the duration of the service period. The units are in TU.
+ * This is the duration of the service period. This is specified as
+ * multiples of 256 microseconds. Valid values are 0x1 to 0xFF.
+ * This is a required parameter for
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA: Required (u32)
* This attribute is used to configure wake interval mantissa.
* The units are in TU.
+ * This is a required parameter for
+ * 1. TWT SET Request and Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_STATUS: Required (u8)
+ * This field is applicable for TWT response only.
+ * This contains status values in enum qca_wlan_vendor_twt_status
+ * and is passed to the userspace. This is used in TWT SET operation.
+ * This is a required parameter for
+ * 1. TWT SET Response
+ * 2. TWT TERMINATE Response
+ * 3. TWT SUSPEND Response
+ * 4. TWT RESUME Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_RESP_TYPE: Required (u8)
+ * This field is applicable for TWT response only.
+ * This field contains response type from the TWT responder and is
+ * passed to the userspace. The values for this field are defined in
+ * enum qca_wlan_vendor_twt_setup_resp_type. This is used in TWT SET
+ * response.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME_TSF: Required (u64)
+ * This field is applicable for TWT response only.
+ * This field contains absolute TSF value of the wake time received
+ * from the TWT responder and is passed to the userspace.
+ * This is a required parameter for
+ * 1. TWT SET Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TWT_INFO_ENABLED: Flag attribute.
+ * Enable (flag attribute present) - Indicates that the TWT responder
+ * supports reception of TWT information frame from the TWT requestor.
+ * Disable (flag attribute not present) - Indicates that the responder
+ * doesn't support reception of TWT information frame from requestor.
+ * This is used in
+ * 1. TWT SET Response
+ * 2. TWT GET Response
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAC_ADDR: 6-byte MAC address
+ * Represents the MAC address of the peer for which the TWT session
+ * is being configured. This is used in AP mode to represent the respective
+ * client. In AP mode, this is an optional parameter for response and is
+ * a required parameter for
+ * 1. TWT SET Request
+ * 2. TWT GET Request
+ * 3. TWT TERMINATE Request
+ * 4. TWT SUSPEND Request
+ * In STA mode, this is an optional parameter in request and response for
+ * the above four TWT operations.
*/
enum qca_wlan_vendor_attr_twt_setup {
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_INVALID = 0,
@@ -7356,6 +8045,14 @@
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION = 9,
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA = 10,
+ /* TWT Response only attributes */
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_STATUS = 11,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_RESP_TYPE = 12,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME_TSF = 13,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TWT_INFO_ENABLED = 14,
+
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAC_ADDR = 15,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX =
@@ -7363,24 +8060,83 @@
};
/**
- * enum qca_wlan_vendor_attr_twt_resume: Represents attributes for
+ * enum qca_wlan_vendor_twt_status - Represents the status of the requested
+ * TWT operation
+ *
+ * @QCA_WLAN_VENDOR_TWT_STATUS_OK: TWT request successfully completed
+ * @QCA_WLAN_VENDOR_TWT_STATUS_TWT_NOT_ENABLED: TWT not enabled
+ * @QCA_WLAN_VENDOR_TWT_STATUS_USED_DIALOG_ID: TWT dialog ID is already used
+ * @QCA_WLAN_VENDOR_TWT_STATUS_SESSION_BUSY: TWT session is busy
+ * @QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST: TWT session does not exist
+ * @QCA_WLAN_VENDOR_TWT_STATUS_NOT_SUSPENDED: TWT session not in suspend state
+ * @QCA_WLAN_VENDOR_TWT_STATUS_INVALID_PARAM: Invalid parameters
+ * @QCA_WLAN_VENDOR_TWT_STATUS_NOT_READY: FW not ready
+ * @QCA_WLAN_VENDOR_TWT_STATUS_NO_RESOURCE: FW resource exhausted
+ * @QCA_WLAN_VENDOR_TWT_STATUS_NO_ACK: Peer AP/STA did not ACK the
+ * request/response frame
+ * @QCA_WLAN_VENDOR_TWT_STATUS_NO_RESPONSE: Peer AP did not send the response
+ * frame
+ * @QCA_WLAN_VENDOR_TWT_STATUS_DENIED: AP did not accept the request
+ * @QCA_WLAN_VENDOR_TWT_STATUS_UNKNOWN_ERROR: Adding TWT dialog failed due to an
+ * unknown reason
+ * @QCA_WLAN_VENDOR_TWT_STATUS_ALREADY_SUSPENDED: TWT session already in
+ * suspend state
+ */
+enum qca_wlan_vendor_twt_status {
+ QCA_WLAN_VENDOR_TWT_STATUS_OK = 0,
+ QCA_WLAN_VENDOR_TWT_STATUS_TWT_NOT_ENABLED = 1,
+ QCA_WLAN_VENDOR_TWT_STATUS_USED_DIALOG_ID = 2,
+ QCA_WLAN_VENDOR_TWT_STATUS_SESSION_BUSY = 3,
+ QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST = 4,
+ QCA_WLAN_VENDOR_TWT_STATUS_NOT_SUSPENDED = 5,
+ QCA_WLAN_VENDOR_TWT_STATUS_INVALID_PARAM = 6,
+ QCA_WLAN_VENDOR_TWT_STATUS_NOT_READY = 7,
+ QCA_WLAN_VENDOR_TWT_STATUS_NO_RESOURCE = 8,
+ QCA_WLAN_VENDOR_TWT_STATUS_NO_ACK = 9,
+ QCA_WLAN_VENDOR_TWT_STATUS_NO_RESPONSE = 10,
+ QCA_WLAN_VENDOR_TWT_STATUS_DENIED = 11,
+ QCA_WLAN_VENDOR_TWT_STATUS_UNKNOWN_ERROR = 12,
+ QCA_WLAN_VENDOR_TWT_STATUS_ALREADY_SUSPENDED = 13,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_twt_resume - Represents attributes for
* TWT (Target Wake Time) resume request. These attributes are sent as part of
* %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME and
- * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
+ * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. Also used by
+ * attributes through %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT: Optional (u8)
- * This attribute is used as the SP offset which is the offset from
- * TSF after which the wake happens. The units are in microseconds.
- * If this attribute is not provided, then the value will be set to
- * zero.
+ * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT2_TWT: Optional (u32)
+ * These attributes are used as the SP offset which is the offset from TSF after
+ * which the wake happens. The units are in microseconds. Please note that
+ * _NEXT_TWT is limited to u8 whereas _NEXT2_TWT takes the u32 data.
+ * _NEXT2_TWT takes the precedence over _NEXT_TWT and thus the recommendation
+ * is to use _NEXT2_TWT. If neither of these attributes is provided, the value
+ * will be set to zero.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE: Required (u32)
* This attribute represents the next TWT subfield size.
+ * Value 0 represents 0 bits, 1 represents 32 bits, 2 for 48 bits,
+ * and 4 for 64 bits.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_FLOW_ID: Required (u8).
+ * Flow ID is the unique identifier for each TWT session. This attribute
+ * represents the respective TWT session to resume.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_MAC_ADDR: 6-byte MAC address
+ * Represents the MAC address of the peer to which TWT Resume is
+ * being sent. This is used in AP mode to represent the respective
+ * client and is a required parameter. In STA mode, this is an optional
+ * parameter
*/
enum qca_wlan_vendor_attr_twt_resume {
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT = 1,
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE = 2,
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_FLOW_ID = 3,
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT2_TWT = 4,
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_MAC_ADDR = 5,
/* keep last */
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST,
@@ -7389,6 +8145,28 @@
};
/**
+ * enum qca_wlan_vendor_twt_setup_resp_type - Represents the response type by
+ * the TWT responder
+ *
+ * @QCA_WLAN_VENDOR_TWT_RESP_ALTERNATE: TWT responder suggests TWT
+ * parameters that are different from TWT requesting STA suggested
+ * or demanded TWT parameters
+ * @QCA_WLAN_VENDOR_TWT_RESP_DICTATE: TWT responder demands TWT
+ * parameters that are different from TWT requesting STA TWT suggested
+ * or demanded parameters
+ * @QCA_WLAN_VENDOR_TWT_RESP_REJECT: TWT responder rejects TWT
+ * setup
+ * @QCA_WLAN_VENDOR_TWT_RESP_ACCEPT: TWT responder accepts the TWT
+ * setup.
+ */
+enum qca_wlan_vendor_twt_setup_resp_type {
+ QCA_WLAN_VENDOR_TWT_RESP_ALTERNATE = 1,
+ QCA_WLAN_VENDOR_TWT_RESP_DICTATE = 2,
+ QCA_WLAN_VENDOR_TWT_RESP_REJECT = 3,
+ QCA_WLAN_VENDOR_TWT_RESP_ACCEPT = 4,
+};
+
+/**
* enum qca_wlan_vendor_twt_setup_req_type - Required (u8)
* Represents the setup type being requested for TWT.
* @QCA_WLAN_VENDOR_TWT_SETUP_REQUEST: STA is not specifying all the TWT
@@ -8321,10 +9099,14 @@
* enum qca_wlan_vendor_attr_oem_data_params - Used by the vendor command/event
* QCA_NL80211_VENDOR_SUBCMD_OEM_DATA.
*
- * @QCA_WLAN_VENDOR_ATTR_OEM_DATA_CMD_DATA: The binary blob for the vendor
- * command/event QCA_NL80211_VENDOR_SUBCMD_OEM_DATA are carried through this
- * attribute.
- * NLA_BINARY attribute, the max size is 1024 bytes.
+ * @QCA_WLAN_VENDOR_ATTR_OEM_DATA_CMD_DATA: This NLA_BINARY attribute is
+ * used to set/query the data to/from the firmware. On query, the same
+ * attribute is used to carry the respective data in the reply sent by the
+ * driver to userspace. The request to set/query the data and the format of the
+ * respective data from the firmware are embedded in the attribute. The
+ * maximum size of the attribute payload is 1024 bytes.
+ * Userspace has to set the QCA_WLAN_VENDOR_ATTR_OEM_DATA_RESPONSE_EXPECTED
+ * attribute when the data is queried from the firmware.
*
* @QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO: The binary blob will be routed
* based on this field. This optional attribute is included to specify whether
@@ -8333,11 +9115,16 @@
* command/event.
* This u8 attribute is used to carry information for the device type using
* values defined by enum qca_vendor_oem_device_type.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OEM_DATA_RESPONSE_EXPECTED: This NLA_FLAG attribute
+ * is set when the userspace queries data from the firmware. This attribute
+ * should not be set when userspace sets the OEM data to the firmware.
*/
enum qca_wlan_vendor_attr_oem_data_params {
QCA_WLAN_VENDOR_ATTR_OEM_DATA_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_OEM_DATA_CMD_DATA = 1,
QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO = 2,
+ QCA_WLAN_VENDOR_ATTR_OEM_DATA_RESPONSE_EXPECTED = 3,
/* keep last */
QCA_WLAN_VENDOR_ATTR_OEM_DATA_PARAMS_AFTER_LAST,
@@ -8671,6 +9458,36 @@
* disconnect reason for the last disconnection if the disconnection is
* triggered from the host driver. The values are referred from
* enum qca_disconnect_reason_codes.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BIP_MIC_ERROR_COUNT: u32, used in STA mode
+ * only. This represents the number of group addressed robust management frames
+ * received from this station with an invalid MIC or a missing MME when PMF is
+ * enabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BIP_REPLAY_COUNT: u32, used in STA mode
+ * only. This represents the number of group addressed robust management frames
+ * received from this station with the packet number less than or equal to the
+ * last received packet number when PMF is enabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_MIC_ERROR_COUNT: u32, used in STA
+ * mode only. This represents the number of Beacon frames received from this
+ * station with an invalid MIC or a missing MME when beacon protection is
+ * enabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_REPLAY_COUNT: u32, used in STA mode
+ * only. This represents number of Beacon frames received from this station with
+ * the packet number less than or equal to the last received packet number when
+ * beacon protection is enabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE: u32, used in
+ * STA mode only. The driver uses this attribute to populate the connection
+ * failure reason codes and the values are defined in
+ * enum qca_sta_connect_fail_reason_codes. Userspace applications can send
+ * QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO vendor command after receiving
+ * a connection failure indication from the driver. The driver shall not
+ * include this attribute in response to the
+ * QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO command if there is no connection
+ * failure observed in the last attempted connection.
*/
enum qca_wlan_vendor_attr_get_sta_info {
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_INVALID = 0,
@@ -8712,6 +9529,11 @@
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_IES = 36,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_PROBE_RESP_IES = 37,
QCA_WLAN_VENDOR_ATTR_GET_STA_DRIVER_DISCONNECT_REASON = 38,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BIP_MIC_ERROR_COUNT = 39,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BIP_REPLAY_COUNT = 40,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_MIC_ERROR_COUNT = 41,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_REPLAY_COUNT = 42,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE = 43,
/* keep last */
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST,
@@ -8841,4 +9663,352 @@
QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_AFTER_LAST - 1,
};
+/**
+ * enum qca_wlan_tspec_operation - Operation of the config TSPEC request
+ *
+ * Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_OPERATION.
+ */
+enum qca_wlan_tspec_operation {
+ QCA_WLAN_TSPEC_ADD = 0,
+ QCA_WLAN_TSPEC_DEL = 1,
+ QCA_WLAN_TSPEC_GET = 2,
+};
+
+/**
+ * enum qca_wlan_tspec_direction - Direction in TSPEC
+ * As what is defined in IEEE Std 802.11-2016, Table 9-139.
+ *
+ * Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_DIRECTION.
+ */
+enum qca_wlan_tspec_direction {
+ QCA_WLAN_TSPEC_DIRECTION_UPLINK = 0,
+ QCA_WLAN_TSPEC_DIRECTION_DOWNLINK = 1,
+ QCA_WLAN_TSPEC_DIRECTION_DIRECT = 2,
+ QCA_WLAN_TSPEC_DIRECTION_BOTH = 3,
+};
+
+/**
+ * enum qca_wlan_tspec_ack_policy - MAC acknowledgement policy in TSPEC
+ * As what is defined in IEEE Std 802.11-2016, Table 9-141.
+ *
+ * Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_ACK_POLICY.
+ */
+enum qca_wlan_tspec_ack_policy {
+ QCA_WLAN_TSPEC_NORMAL_ACK = 0,
+ QCA_WLAN_TSPEC_NO_ACK = 1,
+ /* Reserved */
+ QCA_WLAN_TSPEC_BLOCK_ACK = 3,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_config_tspec - Defines attributes
+ * used by %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_OPERATION:
+ * u8 attribute. Specify the TSPEC operation of this request. Possible values
+ * are defined in enum qca_wlan_tspec_operation.
+ * Mandatory attribute for all kinds of config TSPEC requests.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_TSID:
+ * u8 attribute. TS ID. Possible values are 0-7.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD, QCA_WLAN_TSPEC_DEL,
+ * QCA_WLAN_TSPEC_GET. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_DIRECTION:
+ * u8 attribute. Direction of data carried by the TS. Possible values are
+ * defined in enum qca_wlan_tspec_direction.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_APSD:
+ * Flag attribute. Indicate whether APSD is enabled for the traffic associated
+ * with the TS. set - enabled, not set - disabled.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_USER_PRIORITY:
+ * u8 attribute. User priority to be used for the transport of MSDUs/A-MSDUs
+ * belonging to this TS. Possible values are 0-7.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_ACK_POLICY:
+ * u8 attribute. Indicate whether MAC acknowledgements are required for
+ * MPDUs/A-MSDUs belonging to this TS and the form of those acknowledgements.
+ * Possible values are defined in enum qca_wlan_tspec_ack_policy.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_NOMINAL_MSDU_SIZE:
+ * u16 attribute. Specify the nominal size in bytes of MSDUs/A-MSDUs
+ * belonging to this TS.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAXIMUM_MSDU_SIZE:
+ * u16 attribute. Specify the maximum size in bytes of MSDUs/A-MSDUs
+ * belonging to this TS.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MIN_SERVICE_INTERVAL:
+ * u32 attribute. Specify the minimum interval in microseconds between the
+ * start of two successive SPs.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAX_SERVICE_INTERVAL:
+ * u32 attribute. Specify the maximum interval in microseconds between the
+ * start of two successive SPs.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_INACTIVITY_INTERVAL:
+ * u32 attribute. Specify the minimum interval in microseconds that can elapse
+ * without arrival or transfer of an MPDU belonging to the TS before this TS
+ * is deleted by the MAC entity at the HC.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SUSPENSION_INTERVAL:
+ * u32 attribute. Specify the minimum interval in microseconds that can elapse
+ * without arrival or transfer of an MSDU belonging to the TS before the
+ * generation of successive QoS(+)CF-Poll is stopped for this TS. A value of
+ * 0xFFFFFFFF disables the suspension interval. The value of the suspension
+ * interval is always less than or equal to the inactivity interval.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_DATA_RATE:
+ * u32 attribute. Indicate the lowest data rate in bps specified at the MAC
+ * SAP for transport of MSDUs or A-MSDUs belonging to this TS within the
+ * bounds of this TSPEC.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MEAN_DATA_RATE:
+ * u32 attribute. Indicate the average data rate in bps specified at the MAC
+ * SAP for transport of MSDUs or A-MSDUs belonging to this TS within the
+ * bounds of this TSPEC.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_PEAK_DATA_RATE:
+ * u32 attribute. Indicate the maximum allowable data rate in bps specified at
+ * the MAC SAP for transport of MSDUs or A-MSDUs belonging to this TS within
+ * the bounds of this TSPEC.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_BURST_SIZE:
+ * u32 attribute. Specify the maximum burst size in bytes of the MSDUs/A-MSDUs
+ * belonging to this TS that arrive at the MAC SAP at the peak data rate. A
+ * value of 0 indicates that there are no bursts.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_PHY_RATE:
+ * u32 attribute. Indicate the minimum PHY rate in bps for transport of
+ * MSDUs/A-MSDUs belonging to this TS within the bounds of this TSPEC.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SURPLUS_BANDWIDTH_ALLOWANCE:
+ * u16 attribute. Specify the excess allocation of time (and bandwidth) over
+ * and above the stated application rates required to transport an MSDU/A-MSDU
+ * belonging to the TS in this TSPEC.
+ * Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute.
+ */
+enum qca_wlan_vendor_attr_config_tspec {
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_OPERATION = 1,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_TSID = 2,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_DIRECTION = 3,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_APSD = 4,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_USER_PRIORITY = 5,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_ACK_POLICY = 6,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_NOMINAL_MSDU_SIZE = 7,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAXIMUM_MSDU_SIZE = 8,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MIN_SERVICE_INTERVAL = 9,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAX_SERVICE_INTERVAL = 10,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_INACTIVITY_INTERVAL = 11,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SUSPENSION_INTERVAL = 12,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_DATA_RATE = 13,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MEAN_DATA_RATE = 14,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_PEAK_DATA_RATE = 15,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_BURST_SIZE = 16,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_PHY_RATE = 17,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SURPLUS_BANDWIDTH_ALLOWANCE = 18,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAX =
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_oci_override_frame_type - OCI override frame type
+ * @QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_SA_QUERY_REQ: SA Query Request frame
+ * @QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_SA_QUERY_RESP: SA Query Response frame
+ * @QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_FT_REASSOC_REQ: FT Reassociation Request
+ * frame
+ * @QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_FILS_REASSOC_REQ: FILS Reassociation
+ * Request frame.
+ */
+enum qca_wlan_vendor_oci_override_frame_type {
+ QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_SA_QUERY_REQ = 1,
+ QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_SA_QUERY_RESP = 2,
+ QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_FT_REASSOC_REQ = 3,
+ QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_FILS_REASSOC_REQ = 4,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_oci_override: Represents attributes for
+ * OCI override request. These attributes are used inside nested attribute
+ * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OCI_OVERRIDE in QCA vendor command
+ * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_FRAME_TYPE: Required attribute, u8.
+ * Values from enum qca_wlan_vendor_oci_override_frame_type used in this
+ * attribute to specify the frame type in which the OCI is to be overridden.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_FREQUENCY: Required (u32)
+ * OCI frequency (in MHz) to override in the specified frame type.
+ */
+enum qca_wlan_vendor_attr_oci_override {
+ QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_FRAME_TYPE = 1,
+ QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_FREQUENCY = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_MAX =
+ QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_medium_assess_type - Type of medium assess request
+ *
+ * Values for %QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TYPE.
+ */
+enum qca_wlan_medium_assess_type {
+ QCA_WLAN_MEDIUM_ASSESS_CCA = 0,
+ QCA_WLAN_MEDIUM_ASSESS_CONGESTION_REPORT = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_medium_assess - Attributes used by
+ * %QCA_NL80211_VENDOR_SUBCMD_MEDIUM_ASSESS vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TYPE:
+ * u8 attribute. Mandatory in all kinds of medium assess requests/responses.
+ * Specify the type of medium assess request and indicate its type in response.
+ * Possible values are defined in enum qca_wlan_medium_assess_type.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_PERIOD:
+ * u32 attribute. Mandatory in CCA request.
+ * Specify the assessment period in terms of seconds. Assessment result will be
+ * sent as the response to the CCA request after the assessment period.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TOTAL_CYCLE_COUNT:
+ * u32 attribute. Mandatory in response to CCA request.
+ * Total timer tick count of the assessment cycle.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_IDLE_COUNT:
+ * u32 attribute. Mandatory in response to CCA request.
+ * Timer tick count of idle time in the assessment cycle.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_IBSS_RX_COUNT:
+ * u32 attribute. Mandatory in response to CCA request.
+ * Timer tick count of Intra BSS traffic RX time in the assessment cycle.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_OBSS_RX_COUNT:
+ * u32 attribute. Mandatory in response to CCA request.
+ * Timer tick count of Overlapping BSS traffic RX time in the assessment cycle.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MAX_IBSS_RSSI:
+ * s32 attribute. Mandatory in response to CCA request.
+ * Maximum RSSI of Intra BSS traffic in the assessment cycle.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MIN_IBSS_RSSI:
+ * s32 attribute. Mandatory in response to CCA request.
+ * Minimum RSSI of Intra BSS traffic in the assessment cycle.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_ENABLE:
+ * u8 attribute. Mandatory in congestion report request.
+ * 1-enable 0-disable.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_THRESHOLD:
+ * u8 attribute. Mandatory in congestion report enable request and will be
+ * ignored if present in congestion report disable request. Possible values are
+ * 0-100. A vendor event QCA_NL80211_VENDOR_SUBCMD_MEDIUM_ASSESS with the type
+ * QCA_WLAN_MEDIUM_ASSESS_CONGESTION_REPORT will be sent to userspace if
+ * congestion percentage reaches the configured threshold.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_INTERVAL:
+ * u8 attribute. Optional in congestion report enable request and will be
+ * ignored if present in congestion report disable request.
+ * Specify the interval of congestion report event in terms of seconds. Possible
+ * values are 1-255. Default value 1 will be used if this attribute is omitted
+ * or using invalid values.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_PERCENTAGE:
+ * u8 attribute. Mandatory in congestion report event.
+ * Indicate the actual congestion percentage. Possible values are 0-100.
+ */
+enum qca_wlan_vendor_attr_medium_assess {
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TYPE = 1,
+
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_PERIOD = 2,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TOTAL_CYCLE_COUNT = 3,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_IDLE_COUNT = 4,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_IBSS_RX_COUNT = 5,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_OBSS_RX_COUNT = 6,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MAX_IBSS_RSSI = 7,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MIN_IBSS_RSSI = 8,
+
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_ENABLE = 9,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_THRESHOLD = 10,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_INTERVAL = 11,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_PERCENTAGE = 12,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MAX =
+ QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_mbssid_tx_vdev_status - Defines attributes
+ * used by QCA_NL80211_VENDOR_SUBCMD_MBSSID_TX_VDEV_STATUS vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_VAL:
+ * u8 attribute. Notify the TX VDEV status. Possible values 0, 1
+ * belonging to MBSSID/EMA_AP configuration. 0 means Non-Tx VDEV,
+ * 1 means Tx VDEV. Mandatory attribute for all MBSSID VDEV status events.
+ */
+enum qca_wlan_vendor_attr_mbssid_tx_vdev_status {
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_VAL = 1,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_MAX =
+ QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_sta_connect_fail_reason_codes - Defines values carried
+ * by QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE vendor
+ * attribute.
+ * @QCA_STA_CONNECT_FAIL_REASON_NO_BSS_FOUND: No Probe Response frame received
+ * for unicast Probe Request frame.
+ * @QCA_STA_CONNECT_FAIL_REASON_AUTH_TX_FAIL: STA failed to send auth request.
+ * @QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_ACK_RECEIVED: AP didn't send ACK for
+ * auth request.
+ * @QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_RESP_RECEIVED: Auth response is not
+ * received from AP.
+ * @QCA_STA_CONNECT_FAIL_REASON_ASSOC_REQ_TX_FAIL: STA failed to send
+ * Association Request frame.
+ * @QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_ACK_RECEIVED: AP didn't send ACK for
+ * Association Request frame.
+ * @QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_RESP_RECEIVED: Association Response
+ * frame is not received from AP.
+ */
+enum qca_sta_connect_fail_reason_codes {
+ QCA_STA_CONNECT_FAIL_REASON_NO_BSS_FOUND = 1,
+ QCA_STA_CONNECT_FAIL_REASON_AUTH_TX_FAIL = 2,
+ QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_ACK_RECEIVED = 3,
+ QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_RESP_RECEIVED = 4,
+ QCA_STA_CONNECT_FAIL_REASON_ASSOC_REQ_TX_FAIL = 5,
+ QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_ACK_RECEIVED = 6,
+ QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_RESP_RECEIVED = 7,
+};
+
#endif /* QCA_VENDOR_H */