Cumulative patch from commit 8960afa4bfa423774a8ca58cc21a4a7c1ab6089e
8960afa wpa_cli: Run action file in case of an AP event
1cece2f OpenSSL: Comment out tls_connection_get_eap_fast_key without EAP-FAST
7358170 TLS: Split tls_connection_prf() into two functions
f150db6 OpenSSL: Remove two more accesses of ssl_ctx->cert_store
6dc3206 scan: Fix a memory leak on an error path
9ce3e61 nl80211: Add TEST_FAIL() to nl80211_set_mac_addr()
8880240 scan: Clean up code a bit - phase1 is used in all WPS cases
e1ae287 scan: Clean up code a bit - ssid cannot be NULL here
a170394 Update ChangeLog files for v2.6
a26c9c2 Fix sending non-Public Action frames over P2P Device interface
4d916ed nl80211: Register for only for specific Action frames in AP mode
31d7fb1 P2PS: Allow P2P_CONNECT command for P2PS connection with/without PIN
467fc14 P2PS: Correct config_methods for different P2P cases
9d136b0 EAP-SAKE: Do not debug print result if eap_sake_compute_mic() fails
0884633 EAP-PAX: Do not debug print result if eap_pax_mac() fails
92abe37 EAP-FAST: Check sha1_t_prf() result in eap_fast_get_cmk()
636a238 WPS: Check sha256_vector() result in wps_build_oob_dev_pw()
2c3d95c Check md5_vector() result in decrypt_ms_key()
38eee0f Check hmac_md5() result in radius_msg_verify_msg_auth()
05dad94 Check md5_vector() result in radius_msg_verify()
aae125e WPS: Fix debug prints in wps_derive_psk() error case
7d1007a Fix external radio work debug printing on removal
b6317b4 wpa_supplicant: Add wps_disabled parameter to network block
23d71a0 Set wpa_psk_set in wpa_supplicant AP mode is PSK is available
6641954 Fix AP mode key_mgmt configuration in wpa_supplicant default case
ad6cee3 P2P: Do not enable P2P group processing for non-P2P AP mode
a185e9b tests/remote: Add hwsim wrapper
ff9bb8a tests/remote: Add test_example.py
a73fa13 tests/remote: Add utils file
ede4719 tests/remote: Add monitor.py
3b11ad3 Send CTRL-EVENT-REGDOM-CHANGE event on the parent interface
4de70e2 Add MGMT_RX_PROCESS test command for wpa_supplicant
f42c3ce mesh: Calculate MTK before sending it to MAC in case Open is dropped
baa1213 mesh: Add missing action to cancel timer
e8a1b6b D-Bus: Check driver capability for IBSS in Modes property of Capabilities
7a1887f wpa_cli: Add backspace key process for some terminal
3dd0e9e wpa_supplicant: Fix CONFIG_AP build without CTRL_IFACE
d58b60d drivers: Add NEED_RADIOTAP
6a9681e OpenSSL: Make dh5_init() match the generic implementation
46bac65 WPS: Fix segmentation fault in new DH key derivation
e447133 OpenSSL: BoringSSL has SSL_get_client_random(), etc.
03626e9 Skip connection attempt for non-RSN networks if PMF is set to required
2295004 Ignore pmf=1/2 parameter for non-RSN networks
2a3f565 Reject SET commands with newline characters in the string values
b166cd8 Reject SET_CRED commands with newline characters in the string values
0fe5a23 Remove newlines from wpa_supplicant config network output
73e4abb Reject psk parameter set with invalid passphrase character
ecbb0b3 WPS: Reject a Credential with invalid passphrase
f4830be nl80211: Try running without mgmt frame subscription (driver AP SME)
df5bde8 Android: Remove EAP-FAST option
60d9f67 WPS: Explicitly clear wpabuf memory with key information
9b377be P2P: Copy config from p2pdev when not using dedicated group interface
3c88d26 P2P: Fix wpas_p2p_nfc_auth_join()
2f19563 WNM: Fetch scan results before checking transition candidates
4ac3398 Use a shared helper function for parsing hostapd.conf IEs
a911227 Add assocresp_elements parameter for hostapd
49fe2ad OpenSSL: Support OpenSSL 1.1.0 DH opacity
b92d2a5 FT: Fix RRB for FT over-the-air case
9e5a5de systemd: Update service files according to D-Bus interface version
ac7aea8 Assign QCA vendor command/attributes for set/get wifi configuration
57b3888 P2P: Add P2P_GROUP_MEMBER command to fetch client interface address
0ee8925 P2P: Trigger event when invitation is accepted
bd86ea0 nl80211: Get rid of unused assignment warning
18ae3a6 bsd: Set level correctly for non FreeBSD systems
cf667c6 RRM: Modify the processing of a received neighbor report
00ed0aa SME: Add support for global RRM flag
b5d172e nl80211: Add support for global RRM flag
a7f0bb7 driver: Add global RRM support flag
864b952 nl80211: Register to receive Radio Measurement Request frames
4a74201 wpa_supplicant: Handle LCI request
220754c hostapd: Add FTM range request
f4f185a hostapd: Add LCI request
629e180 hostapd: Save RM enabled capability of station
2572df3 hostapd: Handle Neighbor Report Request frame
061269b hostapd: Add own neighbor report data to neighbor database
9b4b226 hostapd: Add a database of neighboring APs
0101821 hostapd: Extend the configuration of RRM capabilities
6a4f0ed Fix spelling of "neighbor" in a function name
d41a535 wpa_supplicant: Add LCI and civic request to Neighbor Report Request
624b8a0 utils: Add ssid_parse() function
e4fbc8d Add measurement and neighbor report definitions
9d955f7 utils: Rename hostapd_parse_bin to wpabuf_parse_bin and move it
74e982d hostapd: Set LCI and Location Civic information in configuration
1854eec Add POLL_STA command to check connectivity in AP mode
3dbfb28 Allow AP to disconnect STA without sending Deauth/Disassoc frame
de92314 Add inactive_msec into STA output
61c1011 Extend VENDOR_ELEM parameters to cover non-P2P Probe Request frame
6922d44 nl80211: Implement configure_data_frame_filters() callback
ece4ac5 HS 2.0: Add support for configuring frame filters
e42adb9 driver: Add a packet filtering function declaration
ae33239 AP: Pass station P2P PS capabilities info during station add/set
7405bb0 Sync with mac80211-next.git include/uapi/linux/nl80211.h
90f1496 wpa_supplicant: "don't care" value for pbss in ssid structure
e52a698 RADIUS: Fix a possible memory leak on an error path
f1863f2 RADIUS: Fix possible memory leak when parsing per-STA passphrase
3433721 P2P: Continue p2p_find after sending non-success Invitation Response
0f34665 Mark wpa_supplicant_{start,stop}_sched_scan() static
Also reverting:
c7f648c wpa_supplicant_8: Add a temporary hack to work around BoringSSL incompatibility
1e1c48d2 Update AP IE regardless WPA_DRIVER_FLAGS_BSS_SELECTION flag
Change-Id: Idb9bfa80e9d9a4d10323dab5ce2bb24f4baf550c
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index b7e0d16..4675be2 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -54,6 +54,13 @@
#define HOSTAPD_CHAN_VHT_130_30 0x04000000
#define HOSTAPD_CHAN_VHT_150_10 0x08000000
+/* Filter gratuitous ARP */
+#define WPA_DATA_FRAME_FILTER_FLAG_ARP BIT(0)
+/* Filter unsolicited Neighbor Advertisement */
+#define WPA_DATA_FRAME_FILTER_FLAG_NA BIT(1)
+/* Filter unicast IP packets encrypted using the GTK */
+#define WPA_DATA_FRAME_FILTER_FLAG_GTK BIT(2)
+
/**
* enum reg_change_initiator - Regulatory change initiator
*/
@@ -1365,6 +1372,12 @@
* offset, namely the 6th byte in the Action frame body.
*/
#define WPA_DRIVER_FLAGS_TX_POWER_INSERTION 0x00000008
+/**
+ * Driver supports RRM. With this support, the driver will accept to use RRM in
+ * (Re)Association Request frames, without supporting quiet period.
+ */
+#define WPA_DRIVER_FLAGS_SUPPORT_RRM 0x00000010
+
u32 rrm_flags;
/* Driver concurrency capabilities */
@@ -1419,6 +1432,7 @@
size_t supp_channels_len;
const u8 *supp_oper_classes;
size_t supp_oper_classes_len;
+ int support_p2p_ps;
};
struct mac_address {
@@ -3537,6 +3551,15 @@
* Returns 0 on success, -1 on failure
*/
int (*abort_scan)(void *priv);
+
+ /**
+ * configure_data_frame_filters - Request to configure frame filters
+ * @priv: Private driver interface data
+ * @filter_flags: The type of frames to filter (bitfield of
+ * WPA_DATA_FRAME_FILTER_FLAG_*)
+ * Returns: 0 on success or -1 on failure
+ */
+ int (*configure_data_frame_filters)(void *priv, u32 filter_flags);
};
diff --git a/src/drivers/driver_bsd.c b/src/drivers/driver_bsd.c
index fd73f2e..2afd7df 100644
--- a/src/drivers/driver_bsd.c
+++ b/src/drivers/driver_bsd.c
@@ -1376,11 +1376,16 @@
result->caps = sr->isr_capinfo;
result->qual = sr->isr_rssi;
result->noise = sr->isr_noise;
+
+#ifdef __FreeBSD__
/*
* the rssi value reported by the kernel is in 0.5dB steps relative to
* the reported noise floor. see ieee80211_node.h for details.
*/
result->level = sr->isr_rssi / 2 + sr->isr_noise;
+#else
+ result->level = sr->isr_rssi;
+#endif
pos = (u8 *)(result + 1);
diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index 798e694..12a417b 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -1989,6 +1989,10 @@
if (nl80211_register_action_frame(bss, (u8 *) "\x05\x05", 2) < 0)
ret = -1;
+ /* Radio Measurement - Radio Measurement Request */
+ if (nl80211_register_action_frame(bss, (u8 *) "\x05\x00", 2) < 0)
+ ret = -1;
+
/* Radio Measurement - Link Measurement Request */
if ((drv->capa.rrm_flags & WPA_DRIVER_FLAGS_TX_POWER_INSERTION) &&
(nl80211_register_action_frame(bss, (u8 *) "\x05\x02", 2) < 0))
@@ -2050,6 +2054,49 @@
}
+static int nl80211_action_subscribe_ap(struct i802_bss *bss)
+{
+ int ret = 0;
+
+ /* Public Action frames */
+ if (nl80211_register_action_frame(bss, (u8 *) "\x04", 1) < 0)
+ ret = -1;
+ /* RRM Measurement Report */
+ if (nl80211_register_action_frame(bss, (u8 *) "\x05\x01", 2) < 0)
+ ret = -1;
+ /* RRM Neighbor Report Request */
+ if (nl80211_register_action_frame(bss, (u8 *) "\x05\x04", 2) < 0)
+ ret = -1;
+ /* FT Action frames */
+ if (nl80211_register_action_frame(bss, (u8 *) "\x06", 1) < 0)
+ ret = -1;
+#ifdef CONFIG_IEEE80211W
+ /* SA Query */
+ if (nl80211_register_action_frame(bss, (u8 *) "\x08", 1) < 0)
+ ret = -1;
+#endif /* CONFIG_IEEE80211W */
+ /* Protected Dual of Public Action */
+ if (nl80211_register_action_frame(bss, (u8 *) "\x09", 1) < 0)
+ ret = -1;
+ /* WNM */
+ if (nl80211_register_action_frame(bss, (u8 *) "\x0a", 1) < 0)
+ ret = -1;
+ /* WMM */
+ if (nl80211_register_action_frame(bss, (u8 *) "\x11", 1) < 0)
+ ret = -1;
+#ifdef CONFIG_FST
+ /* FST Action frames */
+ if (nl80211_register_action_frame(bss, (u8 *) "\x12", 1) < 0)
+ ret = -1;
+#endif /* CONFIG_FST */
+ /* Vendor-specific */
+ if (nl80211_register_action_frame(bss, (u8 *) "\x7f", 1) < 0)
+ ret = -1;
+
+ return ret;
+}
+
+
static int nl80211_mgmt_subscribe_ap(struct i802_bss *bss)
{
static const int stypes[] = {
@@ -2058,7 +2105,6 @@
WLAN_FC_STYPE_REASSOC_REQ,
WLAN_FC_STYPE_DISASSOC,
WLAN_FC_STYPE_DEAUTH,
- WLAN_FC_STYPE_ACTION,
WLAN_FC_STYPE_PROBE_REQ,
/* Beacon doesn't work as mac80211 doesn't currently allow
* it, but it wouldn't really be the right thing anyway as
@@ -2083,6 +2129,9 @@
}
}
+ if (nl80211_action_subscribe_ap(bss))
+ goto out_err;
+
if (nl80211_register_spurious_class3(bss))
goto out_err;
@@ -2105,10 +2154,7 @@
wpa_printf(MSG_DEBUG, "nl80211: Subscribe to mgmt frames with AP "
"handle %p (device SME)", bss->nl_mgmt);
- if (nl80211_register_frame(bss, bss->nl_mgmt,
- (WLAN_FC_TYPE_MGMT << 2) |
- (WLAN_FC_STYPE_ACTION << 4),
- NULL, 0) < 0)
+ if (nl80211_action_subscribe_ap(bss))
goto out_err;
nl80211_mgmt_handle_register_eloop(bss);
@@ -3877,6 +3923,13 @@
params->ext_capab_len, params->ext_capab))
goto fail;
}
+
+ if (is_ap_interface(drv->nlmode) &&
+ nla_put_u8(msg, NL80211_ATTR_STA_SUPPORT_P2P_PS,
+ params->support_p2p_ps ?
+ NL80211_P2P_PS_SUPPORTED :
+ NL80211_P2P_PS_UNSUPPORTED))
+ goto fail;
}
if (!params->set) {
if (params->aid) {
@@ -4291,7 +4344,8 @@
if (drv->device_ap_sme && !drv->use_monitor)
if (nl80211_mgmt_subscribe_ap_dev_sme(bss))
- return -1;
+ wpa_printf(MSG_DEBUG,
+ "nl80211: Failed to subscribe for mgmt frames from SME driver - trying to run without it");
if (!drv->device_ap_sme && drv->use_monitor &&
nl80211_create_monitor_interface(drv) &&
@@ -4822,9 +4876,10 @@
if (params->rrm_used) {
u32 drv_rrm_flags = drv->capa.rrm_flags;
- if (!(drv_rrm_flags &
- WPA_DRIVER_FLAGS_DS_PARAM_SET_IE_IN_PROBES) ||
- !(drv_rrm_flags & WPA_DRIVER_FLAGS_QUIET) ||
+ if ((!((drv_rrm_flags &
+ WPA_DRIVER_FLAGS_DS_PARAM_SET_IE_IN_PROBES) &&
+ (drv_rrm_flags & WPA_DRIVER_FLAGS_QUIET)) &&
+ !(drv_rrm_flags & WPA_DRIVER_FLAGS_SUPPORT_RRM)) ||
nla_put_flag(msg, NL80211_ATTR_USE_RRM))
return -1;
}
@@ -8249,6 +8304,9 @@
struct wpa_driver_nl80211_data *drv = bss->drv;
int new_addr = addr != NULL;
+ if (TEST_FAIL())
+ return -1;
+
if (!addr)
addr = drv->perm_addr;
@@ -9053,6 +9111,97 @@
#endif /* CONFIG_DRIVER_NL80211_QCA */
+static int nl80211_write_to_file(const char *name, unsigned int val)
+{
+ int fd, len;
+ char tmp[128];
+
+ fd = open(name, O_RDWR);
+ if (fd < 0) {
+ wpa_printf(MSG_ERROR, "nl80211: Failed to open %s: %s",
+ name, strerror(errno));
+ return fd;
+ }
+
+ len = os_snprintf(tmp, sizeof(tmp), "%u\n", val);
+ len = write(fd, tmp, len);
+ if (len < 0)
+ wpa_printf(MSG_ERROR, "nl80211: Failed to write to %s: %s",
+ name, strerror(errno));
+ close(fd);
+
+ return 0;
+}
+
+
+static int nl80211_configure_data_frame_filters(void *priv, u32 filter_flags)
+{
+ struct i802_bss *bss = priv;
+ char path[128];
+ int ret;
+
+ wpa_printf(MSG_DEBUG, "nl80211: Data frame filter flags=0x%x",
+ filter_flags);
+
+ /* Configure filtering of unicast frame encrypted using GTK */
+ ret = os_snprintf(path, sizeof(path),
+ "/proc/sys/net/ipv4/conf/%s/drop_unicast_in_l2_multicast",
+ bss->ifname);
+ if (os_snprintf_error(sizeof(path), ret))
+ return -1;
+
+ ret = nl80211_write_to_file(path,
+ !!(filter_flags &
+ WPA_DATA_FRAME_FILTER_FLAG_GTK));
+ if (ret) {
+ wpa_printf(MSG_ERROR,
+ "nl80211: Failed to set IPv4 unicast in multicast filter");
+ return ret;
+ }
+
+ os_snprintf(path, sizeof(path),
+ "/proc/sys/net/ipv6/conf/%s/drop_unicast_in_l2_multicast",
+ bss->ifname);
+ ret = nl80211_write_to_file(path,
+ !!(filter_flags &
+ WPA_DATA_FRAME_FILTER_FLAG_GTK));
+
+ if (ret) {
+ wpa_printf(MSG_ERROR,
+ "nl80211: Failed to set IPv6 unicast in multicast filter");
+ return ret;
+ }
+
+ /* Configure filtering of unicast frame encrypted using GTK */
+ os_snprintf(path, sizeof(path),
+ "/proc/sys/net/ipv4/conf/%s/drop_gratuitous_arp",
+ bss->ifname);
+ ret = nl80211_write_to_file(path,
+ !!(filter_flags &
+ WPA_DATA_FRAME_FILTER_FLAG_ARP));
+ if (ret) {
+ wpa_printf(MSG_ERROR,
+ "nl80211: Failed set gratuitous ARP filter");
+ return ret;
+ }
+
+ /* Configure filtering of IPv6 NA frames */
+ os_snprintf(path, sizeof(path),
+ "/proc/sys/net/ipv6/conf/%s/drop_unsolicited_na",
+ bss->ifname);
+ ret = nl80211_write_to_file(path,
+ !!(filter_flags &
+ WPA_DATA_FRAME_FILTER_FLAG_NA));
+ if (ret) {
+ wpa_printf(MSG_ERROR,
+ "nl80211: Failed to set unsolicited NA filter");
+ return ret;
+ }
+
+ return 0;
+}
+
+
const struct wpa_driver_ops wpa_driver_nl80211_ops = {
.name = "nl80211",
.desc = "Linux nl80211/cfg80211",
@@ -9169,4 +9318,5 @@
.get_pref_freq_list = nl80211_get_pref_freq_list,
.set_prob_oper_freq = nl80211_set_prob_oper_freq,
#endif /* CONFIG_DRIVER_NL80211_QCA */
+ .configure_data_frame_filters = nl80211_configure_data_frame_filters,
};
diff --git a/src/drivers/driver_nl80211_capa.c b/src/drivers/driver_nl80211_capa.c
index 14a93a0..fc0f95a 100644
--- a/src/drivers/driver_nl80211_capa.c
+++ b/src/drivers/driver_nl80211_capa.c
@@ -352,13 +352,20 @@
struct nlattr *tb)
{
struct wpa_driver_capa *capa = info->capa;
+ u8 *ext_features;
+ int len;
if (tb == NULL)
return;
- if (ext_feature_isset(nla_data(tb), nla_len(tb),
- NL80211_EXT_FEATURE_VHT_IBSS))
+ ext_features = nla_data(tb);
+ len = nla_len(tb);
+
+ if (ext_feature_isset(ext_features, len, NL80211_EXT_FEATURE_VHT_IBSS))
capa->flags |= WPA_DRIVER_FLAGS_VHT_IBSS;
+
+ if (ext_feature_isset(ext_features, len, NL80211_EXT_FEATURE_RRM))
+ capa->rrm_flags |= WPA_DRIVER_FLAGS_SUPPORT_RRM;
}
diff --git a/src/drivers/drivers.mak b/src/drivers/drivers.mak
index c1bfff1..c6d3f81 100644
--- a/src/drivers/drivers.mak
+++ b/src/drivers/drivers.mak
@@ -29,7 +29,6 @@
DRV_OBJS += ../src/drivers/driver_nl80211_event.o
DRV_OBJS += ../src/drivers/driver_nl80211_monitor.o
DRV_OBJS += ../src/drivers/driver_nl80211_scan.o
-DRV_OBJS += ../src/utils/radiotap.o
ifdef CONFIG_DRIVER_NL80211_QCA
DRV_CFLAGS += -DCONFIG_DRIVER_NL80211_QCA
endif
@@ -38,6 +37,7 @@
NEED_NETLINK=y
NEED_LINUX_IOCTL=y
NEED_RFKILL=y
+NEED_RADIOTAP=y
ifdef CONFIG_LIBNL32
DRV_LIBS += -lnl-3
@@ -164,6 +164,10 @@
DRV_OBJS += ../src/drivers/rfkill.o
endif
+ifdef NEED_RADIOTAP
+DRV_OBJS += ../src/utils/radiotap.o
+endif
+
ifdef CONFIG_VLAN_NETLINK
ifdef CONFIG_FULL_DYNAMIC_VLAN
ifdef CONFIG_LIBNL32
diff --git a/src/drivers/drivers.mk b/src/drivers/drivers.mk
index 0444e52..c6fe4c2 100644
--- a/src/drivers/drivers.mk
+++ b/src/drivers/drivers.mk
@@ -25,7 +25,6 @@
DRV_OBJS += src/drivers/driver_nl80211_event.c
DRV_OBJS += src/drivers/driver_nl80211_monitor.c
DRV_OBJS += src/drivers/driver_nl80211_scan.c
-DRV_OBJS += src/utils/radiotap.c
ifdef CONFIG_DRIVER_NL80211_QCA
DRV_CFLAGS += -DCONFIG_DRIVER_NL80211_QCA
endif
@@ -34,6 +33,7 @@
NEED_NETLINK=y
NEED_LINUX_IOCTL=y
NEED_RFKILL=y
+NEED_RADIOTAP=y
ifdef CONFIG_LIBNL32
DRV_LIBS += -lnl-3
@@ -149,6 +149,10 @@
DRV_OBJS += src/drivers/rfkill.c
endif
+ifdef NEED_RADIOTAP
+DRV_OBJS += src/utils/radiotap.c
+endif
+
ifdef CONFIG_DRIVER_CUSTOM
DRV_CFLAGS += -DCONFIG_DRIVER_CUSTOM
endif
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index 7758969..b460628 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -322,7 +322,9 @@
* @NL80211_CMD_GET_SCAN: get scan results
* @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
* %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- * probe requests at CCK rate or not.
+ * probe requests at CCK rate or not. %NL80211_ATTR_MAC can be used to
+ * specify a BSSID to scan for; if not included, the wildcard BSSID will
+ * be used.
* @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
* NL80211_CMD_GET_SCAN and on the "scan" multicast group)
* @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
@@ -427,7 +429,11 @@
* @NL80211_CMD_ASSOCIATE: association request and notification; like
* NL80211_CMD_AUTHENTICATE but for Association and Reassociation
* (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
- * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
+ * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The
+ * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
+ * request is for the initial association to an ESS (that attribute not
+ * included) or for reassociation within the ESS (that attribute is
+ * included).
* @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
* NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
* MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
@@ -477,6 +483,9 @@
* set of BSSID,frequency parameters is used (i.e., either the enforcing
* %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
* %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
+ * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within
+ * the ESS in case the device is already associated and an association with
+ * a different BSS is desired.
* Background scan period can optionally be
* specified in %NL80211_ATTR_BG_SCAN_PERIOD,
* if not specified default background scan configuration
@@ -1285,8 +1294,11 @@
* @NL80211_ATTR_RESP_IE: (Re)association response information elements as
* sent by peer, for ROAM and successful CONNECT events.
*
- * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
- * commands to specify using a reassociate frame
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT
+ * commands to specify a request to reassociate within an ESS, i.e., to use
+ * Reassociate Request frame (with the value of this attribute in the
+ * Current AP address field) instead of Association Request frame which is
+ * used for the initial association to an ESS.
*
* @NL80211_ATTR_KEY: key information in a nested attribute with
* %NL80211_KEY_* sub-attributes
@@ -1727,6 +1739,8 @@
* underlying device supports these minimal RRM features:
* %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,
* %NL80211_FEATURE_QUIET,
+ * Or, if global RRM is supported, see:
+ * %NL80211_EXT_FEATURE_RRM
* If this flag is used, driver must add the Power Capabilities IE to the
* association request. In addition, it must also set the RRM capability
* flag in the association request's Capability Info field.
@@ -1793,6 +1807,15 @@
* in a PBSS. Specified in %NL80211_CMD_CONNECT to request
* connecting to a PCP, and in %NL80211_CMD_START_AP to start
* a PCP instead of AP. Relevant for DMG networks only.
+ * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
+ * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains
+ * attributes according &enum nl80211_bss_select_attr to indicate what
+ * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT
+ * it contains the behaviour-specific attribute containing the parameters for
+ * BSS selection to be done by driver and/or firmware.
+ *
+ * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
+ * or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2170,6 +2193,10 @@
NL80211_ATTR_PBSS,
+ NL80211_ATTR_BSS_SELECT,
+
+ NL80211_ATTR_STA_SUPPORT_P2P_PS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2313,6 +2340,20 @@
NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
};
+/**
+ * enum nl80211_sta_p2p_ps_status - station support of P2P PS
+ *
+ * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
+ * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
+ * @NUM_NL80211_P2P_PS_STATUS: number of values
+ */
+enum nl80211_sta_p2p_ps_status {
+ NL80211_P2P_PS_UNSUPPORTED = 0,
+ NL80211_P2P_PS_SUPPORTED,
+
+ NUM_NL80211_P2P_PS_STATUS,
+};
+
#define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER
/**
@@ -4402,12 +4443,18 @@
/**
* enum nl80211_ext_feature_index - bit index of extended features.
* @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
+ * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can
+ * can request to use RRM (see %NL80211_ATTR_USE_RRM) with
+ * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
+ * the ASSOC_REQ_USE_RRM flag in the association request even if
+ * NL80211_FEATURE_QUIET is not advertized.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_VHT_IBSS,
+ NL80211_EXT_FEATURE_RRM,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -4657,4 +4704,48 @@
__NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
};
+/**
+ * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
+ *
+ * @band: band of BSS that must match for RSSI value adjustment.
+ * @delta: value used to adjust the RSSI value of matching BSS.
+ */
+struct nl80211_bss_select_rssi_adjust {
+ __u8 band;
+ __s8 delta;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_bss_select_attr - attributes for bss selection.
+ *
+ * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved.
+ * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection
+ * is requested.
+ * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
+ * selection should be done such that the specified band is preferred.
+ * When there are multiple BSS-es in the preferred band, the driver
+ * shall use RSSI-based BSS selection as a second step. The value of
+ * this attribute is according to &enum nl80211_band (u32).
+ * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for
+ * BSS-es in the specified band is to be adjusted before doing
+ * RSSI-based BSS selection. The attribute value is a packed structure
+ * value as specified by &struct nl80211_bss_select_rssi_adjust.
+ * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
+ * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use.
+ *
+ * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT
+ * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour
+ * which the driver shall use.
+ */
+enum nl80211_bss_select_attr {
+ __NL80211_BSS_SELECT_ATTR_INVALID,
+ NL80211_BSS_SELECT_ATTR_RSSI,
+ NL80211_BSS_SELECT_ATTR_BAND_PREF,
+ NL80211_BSS_SELECT_ATTR_RSSI_ADJUST,
+
+ /* keep last */
+ __NL80211_BSS_SELECT_ATTR_AFTER_LAST,
+ NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
+};
+
#endif /* __LINUX_NL80211_H */