Cumulative patch from commit f51f54a007e0de1d413dee3523472d3bbeed2ecc

f51f54a nl80211: Resubscribe to nl80211 events on global nl_event socket
48ec694 Fix Linux packet socket workaround to not close the socket too easily
0d2030e Use estimated throughput to improve roaming selection
1d747e2 Add snr and est_throughput to the BSS entries
a1b790e Select AP based on estimated maximum throughput
ab647ff Add wpa_supplicant Makefile target libwpa_ctrl.a
abae2d1 trace: Initialize alloc_list even without os_program_init() call
891dfb3 Add helper function to clear and free wpa_psk list
71d77ad Update current BSS level when signal change event occurs
f1609f1 wpa_supplicant: Cancel sched_scan when stopping countermeasures
abb8d08 nl80211: Add support for configuring P2P GO CTWindow
0b8bcaa P2P: Allow configuring CTWindow when working as GO
c77ffc6 TDLS: Ignore extra padding in all packets
5ce6ac1 Inteworking: Add support to update the ANQP Capability List into the BSS
185ada4 HS 2.0: Add support to update the HS20 Capability List into the BSS
7fe7a3a wpa_gui: Debug enhancement
2b892d4 Add forgotten network profile parameters to config file writing
563ee18 IBSS: Add support for VHT80 configuration
ada157f Make hostapd_set_freq_params() common
98479dc IBSS: Update operating frequency if joining an existing IBSS
4d9e6fb IBSS: Add fixed_freq network parameter
6f5e1b0 Use priority list instead of global for PNO
97fc2dc Allow libnl-3.0 include path be specified
f92446f P2PS: Add P2PS interface info
59b416c Add optional reassoc-to-same-BSS optimization
c4da67d Fix passive_scan config parameter writing
715d5c4 hs20-osu-client: Ensure NULL checks are done before dereferencing
58d405f Fix OCSP debug messages
710dfb4 OpenSSL: Fix OCSP error path
bd7bb43 HTTP: Fix OCSP error path
946572c Android: Remove commented out non-Android build parameters
15ada7f Android: Remove libxml2 config defines
ebe8d3f Android: Silence unused function parameter warnings
dbd10da Android: Fix hs20-osu-client build on Android 5.0
a926295 HS 2.0R2: Fix permissions for SP/<fqdn> directory on Android
480994d nl80211: Allocate QCA vendor subcmds for DFS radar detected and CAC events
c165cb4 Drop all hostapd STA entries on interface disabled event
106fa1e nl80211: Indicate interface-down event only for the main netdev
eeb1cb2 VLAN: Clean up RTM_NEW/DELLINK processing
47e5fbd hostapd: Avoid sending client probe on removed client
3478273 Re-configure WPA2 group keys on hostapd interface re-enable
f33c860 Re-enable beaconing on interface disable+enable
fc99fab nl80211: Print a debug log entry on NL80211_CMD_PROBE_CLIENT failures
0d2f324 P2P: Fix send_action_in_progress clearing in corner cases
9ff8dda Add hostapd UPDATE_BEACON ctrl_iface command
e0761c5 nl80211: Allocate QCA vendor subcmd for DFS CAC Start event
1db718b nl80211: Test vendor command and event
10263dc Add control interface commands for fetching wpa_config values
f91a512 Add INTERWORKING_ADD_NETWORK command
c612ae9 AP: Do not reply to Probe Request frames with DS Params mismatch
5b74e08 P2P: Document P2P_CONNECT-auto
99650ca Add STOP_AP control interface command
6b00512 P2P: Add event messages for P2P_CONNECT-fallback-to-GO-Neg
b0e669b P2P: Fix P2P_CONNECT-auto fallback to GO Neg with group interface
bf51f4f mesh: Fix remaining BLOCKED state after SAE auth failure
79ddb20 mesh: Add a monitor event on SAE authentication getting blocked
dd2cbaf mesh: Add a monitor event for SAE authentication failure
0cb5f8d mesh: Fix inactivity timer for 32 bit system
11e2ddb mesh: Remove duplicated no_auto_peer update
1e52983 D-Bus: Fix network block type change
4fada12 Fix HT40 co-ex scanning issue on hostapd error path
23ed011 Fix Linux packat socket regression work around
663ae2f Don't write to wpa_supplicant.conf directly
d9a9bc0 IBSS: Do not enable HT with WEP or TKIP
0d7eb43 ACS: Accept channel if any (rather than all) survey results are valid
68fa00c ACS: Allow specific channels to be preferred
6f41a25 ACS: Use weighted average for 2.4 GHz adjacent channel interference

Change-Id: Ie1cabd28dcfdefafa02e81477e34badae6f7e629
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/src/ap/beacon.c b/src/ap/beacon.c
index b0a74e0..e575b65 100644
--- a/src/ap/beacon.c
+++ b/src/ap/beacon.c
@@ -15,6 +15,7 @@
 #include "utils/common.h"
 #include "common/ieee802_11_defs.h"
 #include "common/ieee802_11_common.h"
+#include "common/hw_features_common.h"
 #include "wps/wps_defs.h"
 #include "p2p/p2p.h"
 #include "hostapd.h"
@@ -579,6 +580,27 @@
 		return;
 	}
 
+	/*
+	 * No need to reply if the Probe Request frame was sent on an adjacent
+	 * channel. IEEE Std 802.11-2012 describes this as a requirement for an
+	 * AP with dot11RadioMeasurementActivated set to true, but strictly
+	 * speaking does not allow such ignoring of Probe Request frames if
+	 * dot11RadioMeasurementActivated is false. Anyway, this can help reduce
+	 * number of unnecessary Probe Response frames for cases where the STA
+	 * is less likely to see them (Probe Request frame sent on a
+	 * neighboring, but partially overlapping, channel).
+	 */
+	if (elems.ds_params && elems.ds_params_len == 1 &&
+	    hapd->iface->current_mode &&
+	    (hapd->iface->current_mode->mode == HOSTAPD_MODE_IEEE80211G ||
+	     hapd->iface->current_mode->mode == HOSTAPD_MODE_IEEE80211B) &&
+	    hapd->iconf->channel != elems.ds_params[0]) {
+		wpa_printf(MSG_DEBUG,
+			   "Ignore Probe Request due to DS Params mismatch: chan=%u != ds.chan=%u",
+			   hapd->iconf->channel, elems.ds_params[0]);
+		return;
+	}
+
 #ifdef CONFIG_P2P
 	if (hapd->p2p && elems.wps_ie) {
 		struct wpabuf *wps;
@@ -986,6 +1008,9 @@
 		params->hessid = hapd->conf->hessid;
 	params->access_network_type = hapd->conf->access_network_type;
 	params->ap_max_inactivity = hapd->conf->ap_max_inactivity;
+#ifdef CONFIG_P2P
+	params->p2p_go_ctwindow = hapd->iconf->p2p_go_ctwindow;
+#endif /* CONFIG_P2P */
 #ifdef CONFIG_HS20
 	params->disable_dgaf = hapd->conf->disable_dgaf;
 	if (hapd->conf->osen) {
@@ -1034,6 +1059,8 @@
 	params.beacon_ies = beacon;
 	params.proberesp_ies = proberesp;
 	params.assocresp_ies = assocresp;
+	params.reenable = hapd->reenable_beacon;
+	hapd->reenable_beacon = 0;
 
 	if (iface->current_mode &&
 	    hostapd_set_freq_params(&freq, iconf->hw_mode, iface->freq,