Cumulative patch from commit c0333c8dd59b9e254d3fc725c984b1c0cd3d496a
c0333c8 Check rx_mgmt::frame more consistently against NULL
d6c6b1f Make sta NULL-check easier for static analyzers
0bceb8d Make dl_list_first() and dl_list_last() uses easier for static analyzers
5f693cb WPS HTTP: Remove unused assignment
ee4fefc Remove duplicated variable zeroing
4a9d0eb Make PMKID check easier for static analyzers
06df2aa Remove floating constant suffix 'd' from test coee
9670f87 ACS: Clean up ifdef CONFIG_ACS to avoid unreachable code
ece88f7 Make last_scan_res update easier for static analyzers
d06e9ac P2P: Verify operating channel validity for NFC connection handover
13a524a nl80211: Remove unnecessary wpa_driver_nl80211_set_freq() wrapper
e87ef75 nl80211: Add support for changing AP mode channel bandwidth
3057518 Sync with mac80211-next.git nl80211.h
5f0bca7 Retry initial 20/40 MHz co-ex scan if the driver is busy
587d60d Add AP mode support for HT 20/40 co-ex Action frame
9c47f6a hostapd: Extend support for HT 20/40 coexistence feature
196c9c7 Make channel parameters available in set_ap() driver operation
b7a6702 Indicate disconnection event on interface disabled
b89962b Fix wpa_config_read() with existing config block
27b4187 WPS: Print setsockopt() failure in debug log
52cb207 trace: Replace demangle.h with internal defines
0e80ea2 nl80211: Fix some coding style issues
a26582c Make qca-vendor.h independent of other header files
4a64d5a nl80211: Allocate QCA vendor subcmd for extended statistics
Change-Id: Ibabee77b2b87f04f99d6b1ca0f1ac741cb9222c0
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index 1ba9d62..406010d 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -1579,6 +1579,10 @@
* @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
* As specified in the &enum nl80211_tdls_peer_capability.
*
+ * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface
+ * creation then the new interface will be owned by the netlink socket
+ * that created it and will be destroyed when the socket is closed
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1914,6 +1918,8 @@
NL80211_ATTR_TDLS_PEER_CAPABILITY,
+ NL80211_ATTR_IFACE_SOCKET_OWNER,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2336,9 +2342,34 @@
* using this channel as the primary or any of the secondary channels
* isn't possible
* @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
+ * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this
+ * channel. A channel that has the INDOOR_ONLY attribute can only be
+ * used when there is a clear assessment that the device is operating in
+ * an indoor surroundings, i.e., it is connected to AC power (and not
+ * through portable DC inverters) or is under the control of a master
+ * that is acting as an AP and is connected to AC power.
+ * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this
+ * channel if it's connected concurrently to a BSS on the same channel on
+ * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
+ * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a
+ * channel that has the GO_CONCURRENT attribute set can be done when there
+ * is a clear assessment that the device is operating under the guidance of
+ * an authorized master, i.e., setting up a GO while the device is also
+ * connected to an AP with DFS and radar detection on the UNII band (it is
+ * up to user-space, i.e., wpa_supplicant to perform the required
+ * verifications)
+ * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
+ * on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
* currently defined
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
+ *
+ * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
+ * for more information on the FCC description of the relaxations allowed
+ * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
+ * NL80211_FREQUENCY_ATTR_GO_CONCURRENT.
*/
enum nl80211_frequency_attr {
__NL80211_FREQUENCY_ATTR_INVALID,
@@ -2355,6 +2386,10 @@
NL80211_FREQUENCY_ATTR_NO_80MHZ,
NL80211_FREQUENCY_ATTR_NO_160MHZ,
NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
+ NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
+ NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
+ NL80211_FREQUENCY_ATTR_NO_20MHZ,
+ NL80211_FREQUENCY_ATTR_NO_10MHZ,
/* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -2573,10 +2608,13 @@
* present has been registered with the wireless core that
* has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
* supported feature.
+ * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the
+ * platform is operating in an indoor environment.
*/
enum nl80211_user_reg_hint_type {
NL80211_USER_REG_HINT_USER = 0,
NL80211_USER_REG_HINT_CELL_BASE = 1,
+ NL80211_USER_REG_HINT_INDOOR = 2,
};
/**
@@ -3891,6 +3929,9 @@
* interface. An active monitor interface behaves like a normal monitor
* interface, but gets added to the driver. It ensures that incoming
* unicast packets directed at the configured interface address get ACKed.
+ * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic
+ * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the
+ * lifetime of a BSS.
*/
enum nl80211_feature_flags {
NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
@@ -3911,6 +3952,7 @@
NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15,
NL80211_FEATURE_USERSPACE_MPM = 1 << 16,
NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17,
+ NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18,
};
/**