[wpa_supplicant] Cumulative patch from fe468b071
Bug: 124017368
Test: Device boots up and connects to WPA3/OWE wifi networks, run traffic.
Test: Able to turn on/off softap, associate wifi STA, run traffic.
Test: DPP functional test.
Test: Regression test passed (Bug: 124301325)
fe468b071 HE: Fix set_he_cap() parsing of config options for MU EDCA Params
f3a841bbf Do not disassociate not-associated STA on timeout
91205c8eb OpenSSL: Fix uninitialized variable in CRL reloading corner case
092a19222 Use for_each_element() in ieee802_11_parse_elems()
b50a63896 common: Use for_each_element_id/_extid for get_ie/get_ie_ext/get_vendor_ie
b64479742 common: Use for_each_element_id() in mb_ies_info_by_ies()
9008048f0 common: Use for_each_element_id() in ieee802_11_vendor_ie_concat()
eb84238df common: Use for_each_element() in ieee802_11_ie_count()
0e0c31bdc common: Add strongly typed element iteration macros
525923b1d tests: EAPOL-Key fuzzing tool
02a0a2393 RSN: Do not start preauthentication timer without candidates
1e5506588 JSON: Fix string parsing when \\ escape is at the end of buffer
0dedcb315 JSON: Fix parsing of a number from the end of the buffer
79fa1b453 tests: JSON parser fuzzer
62269c8d8 TLS: Fix X.509 certificate name conversion into empty string
3eae9766b TLS: Fix ASN.1 parsing with no room for the header
fbc2123a1 TLS: Fix AlertDescription for missing partial processing case
1ac9c020b tests: TLS fuzzing tool
f3cca8b1e TLS server: Check credentials have been configured before using them
19dd7a736 TLS server: Local failure information on verify_data mismatch
f08ab18bf TLS server: Add internal callbacks get_failed, get_*_alerts
b642ab406 TLS server: More complete logging of ClientHello decode errors
fdd8a2f0b TLS client: Fix peer certificate event checking for probing
e5bffe1aa OpenSSL: Add more handshake message names to debug
21cd8f831 nl80211: Use wpa_ssid_txt() for debug messages more consistently
bbdb50146 Note HT overrides in debug log only if set
f2a6ac63e P2P: Update find_start timer only when p2p_scan is started.
c4e90da6d MBO: Move the WNM-Notification subtype definitions to common location
105b14f54 HS 2.0: Update the T&C Acceptance subtype value
65b487ae5 HS 2.0: Add QUIET=1 support for building hs20-osu-client
73f285dad Add FT-PSK to GET_CAPABILITY key_mgmt
6110753b1 nl80211: Clear PMKID add command message buffer
0fa33e05b nl80211: Clear connect command message buffer
b14e8ea1d nl80211: Request kernel to trim off payload of netlink requests from acks
789b48bb4 EAP peer: Clear temporary message buffers before freeing
8f99a3c26 Clear config item writing buffer before freeing it
a68e9b698 D-Bus: Fix P2P DeleteService dict iteration
0607346f1 D-Bus: Fix a memory leak in DeleteService handler
d05dda61d PEAP: Explicitly clear temporary keys from memory when using CMK
4e1cd3468 EAP-PEAP: Derive EMSK and use 128-octet derivation for MSK
d8c20ec59 DPP: Clear dpp_listen_freq on remain-on-channel failure
59fa20538 P2P: Allow the avoid channels for P2P discovery/negotiation
e34cd9f06 WNM: Fix WNM-Sleep Mode Request bounds checking
159a7fbde crl_reload_interval: Add CRL reloading support
83c860813 AP: Add wpa_psk_file reloading in runtime
ec5c39a55 AP: Allow identifying which passphrase station used with wpa_psk_file
b08c9ad0c AP: Expose PMK outside of wpa_auth module
89896c000 tests: Use python3 compatible print statement
bab493b90 tests: Use python3 compatible "except" statement
0dab47733 Write multi_ap_backhaul_sta to wpa_supplicant config
98251c6f2 dbus: Document more possible BSS/RSA/KeyMgmt values
1e591df06 Check supported types in wpas_mac_addr_rand_scan_set()
c85249aa1 Fix test compilation error related to sme_event_unprot_disconnect()
42d308635 SAE: Advertise Password Identifier use
59c693064 HS 2.0 server: Command line option to fetch the version information
2d1762fa4 HS 2.0 server: Alternative subrem updateNode for certificate credentials
d97cf2a11 HS 2.0 server: Use noMOUpdate in client certificate subrem
13a200a92 FILS: Remove notes about experimental implementation
86d4e0537 dbus: Expose support of SAE key management in BSS properties
Change-Id: Id507b73f1f4a2e356cbcd3bfcfb9dcd23c8fd9e0
diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
index 4f59160..1bd43b2 100644
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -907,6 +907,13 @@
# PMF required: ieee80211w=2 and key_mgmt=WPA-EAP-SHA256
# (and similarly for WPA-PSK and WPA-WPSK-SHA256 if WPA2-Personal is used)
#
+# ocv: whether operating channel validation is enabled
+# This is a countermeasure against multi-channel man-in-the-middle attacks.
+# Enabling this automatically also enables ieee80211w, if not yet enabled.
+# 0 = disabled (default)
+# 1 = enabled
+#ocv=1
+#
# auth_alg: list of allowed IEEE 802.11 authentication algorithms
# OPEN = Open System authentication (required for WPA/WPA2)
# SHARED = Shared Key authentication (requires static WEP keys)
@@ -987,6 +994,22 @@
# 0: Encrypt traffic (default)
# 1: Integrity only
#
+# macsec_replay_protect: IEEE 802.1X/MACsec replay protection
+# This setting applies only when MACsec is in use, i.e.,
+# - macsec_policy is enabled
+# - the key server has decided to enable MACsec
+# 0: Replay protection disabled (default)
+# 1: Replay protection enabled
+#
+# macsec_replay_window: IEEE 802.1X/MACsec replay protection window
+# This determines a window in which replay is tolerated, to allow receipt
+# of frames that have been misordered by the network.
+# This setting applies only when MACsec replay protection active, i.e.,
+# - macsec_replay_protect is enabled
+# - the key server has decided to enable MACsec
+# 0: No replay window, strict check (default)
+# 1..2^32-1: number of packets that could be misordered
+#
# macsec_port: IEEE 802.1X/MACsec port
# Port component of the SCI
# Range: 1-65534 (default: 1)
@@ -995,9 +1018,10 @@
# This allows to configure MACsec with a pre-shared key using a (CAK,CKN) pair.
# In this mode, instances of wpa_supplicant can act as MACsec peers. The peer
# with lower priority will become the key server and start distributing SAKs.
-# mka_cak (CAK = Secure Connectivity Association Key) takes a 16-bytes (128 bit)
-# hex-string (32 hex-digits)
-# mka_ckn (CKN = CAK Name) takes a 32-bytes (256 bit) hex-string (64 hex-digits)
+# mka_cak (CAK = Secure Connectivity Association Key) takes a 16-byte (128-bit)
+# hex-string (32 hex-digits) or a 32-byte (256-bit) hex-string (64 hex-digits)
+# mka_ckn (CKN = CAK Name) takes a 1..32-bytes (8..256 bit) hex-string
+# (2..64 hex-digits)
# mka_priority (Priority of MKA Actor) is in 0..255 range with 255 being
# default priority
#
@@ -1216,12 +1240,19 @@
# For EAP-FAST, this must be set to 0 (or left unconfigured for the
# default value to be used automatically).
# tls_disable_tlsv1_0=1 - disable use of TLSv1.0
+# tls_disable_tlsv1_0=0 - explicitly enable use of TLSv1.0 (this allows
+# systemwide TLS policies to be overridden)
# tls_disable_tlsv1_1=1 - disable use of TLSv1.1 (a workaround for AAA servers
# that have issues interoperating with updated TLS version)
+# tls_disable_tlsv1_1=0 - explicitly enable use of TLSv1.1 (this allows
+# systemwide TLS policies to be overridden)
# tls_disable_tlsv1_2=1 - disable use of TLSv1.2 (a workaround for AAA servers
# that have issues interoperating with updated TLS version)
+# tls_disable_tlsv1_2=0 - explicitly enable use of TLSv1.2 (this allows
+# systemwide TLS policies to be overridden)
# tls_disable_tlsv1_3=1 - disable use of TLSv1.3 (a workaround for AAA servers
# that have issues interoperating with updated TLS version)
+# tls_disable_tlsv1_3=0 - enable TLSv1.3 (experimental - disabled by default)
# tls_ext_cert_check=0 - No external server certificate validation (default)
# tls_ext_cert_check=1 - External server certificate validation enabled; this
# requires an external program doing validation of server certificate
@@ -1381,6 +1412,20 @@
# Treated as hint by the kernel.
# -1 = Do not make any changes.
# 0-3 = Set AMPDU density (aka factor) to specified value.
+#
+# tx_stbc: Allow overriding STBC support for TX streams
+# Value: 0-1, see IEEE Std 802.11-2016, 9.4.2.56.2.
+# -1 = Do not make any changes (default)
+# 0 = Set if not supported
+# 1 = Set if supported
+#
+# rx_stbc: Allow overriding STBC support for RX streams
+# Value: 0-3, see IEEE Std 802.11-2016, 9.4.2.56.2.
+# -1 = Do not make any changes (default)
+# 0 = Set if not supported
+# 1 = Set for support of one spatial stream
+# 2 = Set for support of one and two spatial streams
+# 3 = Set for support of one, two and three spatial streams
# disable_vht: Whether VHT should be disabled.
# 0 = VHT enabled (if AP supports it)
@@ -1396,6 +1441,13 @@
# 2: MCS 0-9
# 3: not supported
+# multi_ap_backhaul_sta: Multi-AP backhaul STA functionality
+# 0 = normal STA (default)
+# 1 = backhaul STA
+# A backhaul STA sends the Multi-AP IE, fails to associate if the AP does not
+# support Multi-AP, and sets 4-address mode if it does. Thus, the netdev can be
+# added to a bridge to allow forwarding frames over this backhaul link.
+
##### Fast Session Transfer (FST) support #####################################
#
# The options in this section are only available when the build configuration