[wpa_supplicant] cumilative patch from commit d3ed34ba
Bug: 289287296
Test: Connect to open, WPA2, WPA3 and passpoint network
Test: Establish P2P connection
Test: Basic SoftAp tests
Test: Regression test (b/289297084)
BYPASS_INCLUSIVE_LANGUAGE_REASON=Merged from open source
d3ed34bac Define a QCA vendor command to configure MLO link id for TDLS
8e16372cf Indicate link reconfiguration with QCA vendor interface
7b9070229 Indicate TID to link mapping changes with QCA vendor interface
4120f9d7a PASN: Introduce configuration option to allow/deny PASN-UNAUTH
fc681995c Increase MAX_NL80211_NOISE_FREQS in survey dump handler for 6 GHz
df2f22faf MLD STA: Use AP MLD address as previous BSSID for reassociation requests
199b44213 MLD STA: Allow auth frames without ML IE for failure status codes
57386a647 Add QCA vendor command to indicate STA MLD setup links removal
527cf095f Add QCA vendor command to notify TID-to-Link mapping changes
a1601aaa6 WPS: Fix multi-ap fronthaul association
288566031 Store pmk_r1_name derived with wpa_ft_local_derive_pmk_r1() properly
e978072ba Do prune_association only after the STA is authorized
a2c09eb95 Define a QCA vendor attribute to update the CTS channel width
e49c3df63 Add a new driver feature flag for enhanced audio experience over WLAN
cc8a09a48 Add vendor attributes for forcing MLO power save and STR TX
c0e12a518 Add vendor attributes for EHT OM control, EMLSR padding delay
386d59e00 Do not disconnect EAPOL-Logoff before authentication
733723220 wpa_supplicant: Skip scan before starting a BSS in AP mode
f45cf609c wpa_supplicant: Fix compiling without IEEE8021X_EAPOL
c62e94d79 Add missing driver entries to wpa_supplicant documentation
9122b60ff DPP: Remove argument requirement for DPP push button command
397d432f6 Add vendor attributes for MLO link active, EMLSR entry/exit
5d285040d Rename VHT elements to match the standard
8f8f68ba6 hostapd: Support channel switch to 320 MHz channels
4d0743d5e Fix file mode bits
d930211bd Select 6 GHz mode correctly for ACS cases
927dbfb45 Fix 40 MHz channel bringup with ACS on the 6 GHz band
8bc84fcee Allow MLO disabled connection to legacy open/WPA2-Personal-only AP MLDs
b9c3b57a9 Update AP RSNE/RSNXE to RSN state machine on driver-selected BSS cases
566ab39a7 tests: KDK derivation based on Secure LTF capability
6972b0fa2 OWE: Update transition mode information on selecting a new BSS
f54ce7433 Fix determining mode for 6 GHz band when using hw_mode=any
5b568b21a Add support to fetch link layer stats per MLO link
6422b0d72 Fix vendor attribute numbering and relocate attribute accordingly
c858a6360 Add a vendor specific roam status of background scan abort
b171c5e4d Update QCA LL_STATS vendor command
6002fe87d SAE: Fix expected AP MLD address info in a debug print
c70405cef MLD STA: Do not fail on unknown IEs in Authentication frames
f8931fcba hostapd: Restore the flow of set beacon and WPA key init
e8912452e Export wpa_supplicant config item 'he' for external configuration
9932ff30c Allowed frequency list configuration for AP operation
07a7bcd7e WMM: Advertise support for 16 PTKSA replay counters for non-AP STA
ac54b6127 nl80211: Support for RNR elements
5d06acefd RNR: Add elements by default for EMA AP
8f1d38419 RNR: Skip interfaces on the same radio for MBSSID
921f82cf1 Sync with wireless-next.git include/uapi/linux/nl80211.h
302d761a8 Add QCA vendor feature flag for allowed frequency list
44c38af04 Add QCA vendor interface to get connected channels utilization
bb4560252 Add QCA vendor attribute to configure list of allowed frequencies for AP
Change-Id: Ibb944a0a4fbb2ac4abdec8fb09ce2dab3b551c27
diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index 6c25816..2fcdfbe 100644
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -899,6 +899,61 @@
* configure and fetch the state information of the MLO links affiliated
* with the STA interface. The attributes used with this command are
* defined in enum qca_wlan_vendor_attr_mlo_link_state.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_CONNECTED_CHANNEL_STATS: Userspace can use this
+ * vendor subcommand to trigger channel utilization measurement on entire
+ * channel width of the connected channel(s). For MLO connection, connected
+ * channel utilization measurement shall be done on all the MLO links.
+ * The driver may use regular scan or wideband energy detection feature
+ * based on the hardware capability for connected channel(s) utilization
+ * measurement. The driver indicates the connected channel(s) utilization
+ * measurement completion as an asynchronous event with this command ID to
+ * userspace. Upon receiving this event, userspace can use
+ * %NL80211_CMD_GET_INTERFACE to determine the channel width of the current
+ * connected channel(s) and can derive the channel utilization percentage
+ * (CU) of each 20 MHz sub-channel of the entire connected channel using
+ * %NL80211_CMD_GET_SURVEY response.
+ * CU = %NL80211_SURVEY_INFO_TIME_BUSY * 100 / %NL80211_SURVEY_INFO_TIME.
+ * This command is only used for STA mode.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_TID_TO_LINK_MAP: This vendor subcommand is
+ * used as an event to notify the userspace of TID-to-link map changes
+ * negotiated by the driver or updated by associated AP MLD with Beacon,
+ * Probe Response, or Action frames. The attributes used with this command
+ * are defined in enum qca_wlan_vendor_attr_tid_to_link_map.
+ *
+ * Note that the attribute
+ * %QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_AP_MLD_ADDR may not correspond to
+ * the current connected AP MLD address.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_LINK_RECONFIG: Notify userspace about the removal
+ * of STA MLD setup links due to the AP MLD removing the corresponding
+ * affiliated APs with Multi-Link reconfiguration. If all the STA MLD setup
+ * links are removed during Multi-Link reconfiguration, the driver shall
+ * use %NL80211_CMD_DISCONNECT instead of this command since it is a
+ * connection drop. The attributes used with this command are defined in
+ * enum qca_wlan_vendor_attr_link_reconfig.
+ * Note that the attribute
+ * %QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_AP_MLD_ADDR may not correspond to
+ * the current connected AP MLD address.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_TDLS_DISC_RSP_EXT: Vendor command to configure
+ * the driver with MLO link id information on which to transmit the TDLS
+ * discovery response frame on the configured MLO BSS link when the
+ * local station is connected in MLO mode. This command is sent to the
+ * driver prior to the TDLS discovery response management transmit
+ * operation and is followed immediately by the TDLS discovery response
+ * management frame transmit command.
+ *
+ * The driver saves the configured MLO link id information and uses it for
+ * the following TDLS discovery response frame transmission on the
+ * configured MLO BSS link and the link id information is cleared in the
+ * driver after the TDLS discovery response frame is successfully
+ * transmitted. This behavior is indepent of the TDLS peer STA connection
+ * mode (MLO or non-MLO).
+ *
+ * Uses the attributes defined in
+ * enum qca_wlan_vendor_attr_tdls_disc_rsp_ext.
*/
enum qca_nl80211_vendor_subcmds {
QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
@@ -1110,6 +1165,10 @@
QCA_NL80211_VENDOR_SUBCMD_GET_MONITOR_MODE = 225,
QCA_NL80211_VENDOR_SUBCMD_ROAM_STATS = 226,
QCA_NL80211_VENDOR_SUBCMD_MLO_LINK_STATE = 227,
+ QCA_NL80211_VENDOR_SUBCMD_CONNECTED_CHANNEL_STATS = 228,
+ QCA_NL80211_VENDOR_SUBCMD_TID_TO_LINK_MAP = 229,
+ QCA_NL80211_VENDOR_SUBCMD_LINK_RECONFIG = 230,
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_DISC_RSP_EXT = 231,
};
/* Compatibility defines for previously used subcmd names.
@@ -1787,6 +1846,11 @@
* measurement management frames. If
* NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE is set, then
* QCA_WLAN_VENDOR_FEATURE_PROT_RANGE_NEGO_AND_MEASURE_AP will be ignored.
+ * @QCA_WLAN_VENDOR_FEATURE_AP_ALLOWED_FREQ_LIST: Flag indicates that the device
+ * in AP mode supports configuring allowed frequency list for AP operation
+ * with %QCA_WLAN_VENDOR_ATTR_CONFIG_AP_ALLOWED_FREQ_LIST.
+ * @QCA_WLAN_VENDOR_FEATURE_ENHANCED_AUDIO_EXPERIENCE_OVER_WLAN: Flag indicates
+ * that the device supports enhanced audio experience over WLAN feature.
* @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits
*/
enum qca_wlan_vendor_features {
@@ -1812,6 +1876,8 @@
QCA_WLAN_VENDOR_FEATURE_SECURE_RTT_AP = 19,
QCA_WLAN_VENDOR_FEATURE_PROT_RANGE_NEGO_AND_MEASURE_STA = 20,
QCA_WLAN_VENDOR_FEATURE_PROT_RANGE_NEGO_AND_MEASURE_AP = 21,
+ QCA_WLAN_VENDOR_FEATURE_AP_ALLOWED_FREQ_LIST = 22,
+ QCA_WLAN_VENDOR_FEATURE_ENHANCED_AUDIO_EXPERIENCE_OVER_WLAN = 23,
NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */
};
@@ -2839,6 +2905,9 @@
* 8-bit unsigned value. This attribute can be used to configure the
* data path mode to be followed for audio traffic. Possible values
* are defined in enum qca_wlan_audio_data_path.
+ *
+ * This attribute is used only when the driver advertises support for
+ * QCA_WLAN_VENDOR_FEATURE_ENHANCED_AUDIO_EXPERIENCE_OVER_WLAN.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_AUDIO_DATA_PATH = 82,
@@ -2917,6 +2986,57 @@
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_EHT_MLO_MODE = 90,
+ /* Nested attribute with frequencies in u32 attributes to configure a
+ * list of allowed 20 MHz channel center frequencies in MHz for AP
+ * operation. Whenever performing a channel selection operation, the
+ * driver shall generate a new list based on this provided list by
+ * filtering out channels that cannot be used at that time due to
+ * regulatory or other constraints. The resulting list is used as the
+ * list of all allowed channels, i.e., operation on any channel that is
+ * not included is not allowed, whenever performing operations like ACS
+ * and DFS.
+ *
+ * Userspace shall configure this before starting the AP and the
+ * configuration is valid only from the next BSS start and until the
+ * BSS is stopped. The driver shall clear this configuration when the
+ * AP is stopped and fall back to the default behavior for subsequent
+ * AP operation.
+ *
+ * The default behavior when this configuration is not applicable is the
+ * driver can choose any of the channels supported by the hardware
+ * except the channels that cannot be used due to regulatory or other
+ * constraints.
+ *
+ * The driver shall reject this configuration if done after the AP is
+ * started. This attribute can be used to specify user's choice of
+ * frequencies and static puncture channel list, etc.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_AP_ALLOWED_FREQ_LIST = 91,
+
+ /* Nested attribute to indicate EHT MLO links to be forced active.
+ * It contains link MAC address attributes. These nested attributes are
+ * of the type NL80211_ATTR_MAC and are used to force enabling of the
+ * MLO links corresponding to the indicated link MAC addresses.
+ * Subsequently, the links corresponding to the link MAC addresses that
+ * are not indicated are forced inactive.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_EHT_MLO_ACTIVE_LINKS = 92,
+
+ /* 8-bit unsigned value to configure EMLSR mode entry or exit.
+ * Uses enum qca_wlan_emlsr_mode values.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_EMLSR_MODE_SWITCH = 93,
+
+ /* 8-bit unsigned value to configure the channel bandwidth
+ * for CTS frame transmission during the dymamic bandwidth
+ * signaling CTS procedure referred in IEEE Std 802.11-2020,
+ * 10.3.2.9 CTS and DMG CTS procedure.
+ * This configuration is used for testing purposes.
+ *
+ * This uses values defined in enum nl80211_chan_width.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CTS_CHANNEL_WIDTH = 94,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =
@@ -3999,18 +4119,55 @@
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST - 1,
};
+/**
+ * qca_wlan_ll_stats_clr_req_bitmap - Represents the bitmap to clear LL STATS
+ * values for %QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_RADIO: Clear all radio statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_RADIO_CCA: Clear cca_busy_time within
+ * radio statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_RADIO_CHANNEL: Clear all channel
+ * statistics within radio statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_SCAN: Clear all scan statistics within
+ * radio statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE: Clear all interface statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_TXRATE: Clear all TX rate statistics
+ * within interface statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_AC: Clear all AC statistics within
+ * interface statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_CONTENTION: Clear all contention
+ * (min, max, avg) statistics within AC statistics.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_ALL_PEER: Clear all peer statistics
+ * on this interface.
+ *
+ * @QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_PER_PEER: Clear particular peer
+ * statistics depending on the peer_mac.
+ */
+enum qca_wlan_ll_stats_clr_req_bitmap {
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_RADIO = BIT(0),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_RADIO_CCA = BIT(1),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_RADIO_CHANNELS = BIT(2),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_RADIO_SCAN = BIT(3),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE = BIT(4),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_TXRATE = BIT(5),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_AC = BIT(6),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_CONTENTION = BIT(7),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_ALL_PEER = BIT(8),
+ QCA_WLAN_LL_STATS_CLR_REQ_BITMAP_IFACE_PER_PEER = BIT(9),
+};
+
enum qca_wlan_vendor_attr_ll_stats_clr {
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_INVALID = 0,
- /* Unsigned 32bit bitmap for clearing statistics
- * All radio statistics 0x00000001
- * cca_busy_time (within radio statistics) 0x00000002
- * All channel stats (within radio statistics) 0x00000004
- * All scan statistics (within radio statistics) 0x00000008
- * All interface statistics 0x00000010
- * All tx rate statistics (within interface statistics) 0x00000020
- * All ac statistics (with in interface statistics) 0x00000040
- * All contention (min, max, avg) statistics (within ac statisctics)
- * 0x00000080.
+ /* Unsigned 32bit bitmap for clearing statistics, specified
+ * in the enum qca_wlan_ll_stats_clr_req_bitmap.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK = 1,
/* Unsigned 8 bit value: Request to stop statistics collection */
@@ -4030,6 +4187,25 @@
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST - 1,
};
+/**
+ * qca_wlan_ll_stats_get_req_bitmap - Represents the bitmap to request LL STATS
+ * values for %QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK.
+ *
+ * @QCA_WLAN_LL_STATS_GET_REQ_BITMAP_RADIO: Request all radio statistics.
+ *
+ * @QCA_WLAN_LL_STATS_GET_REQ_BITMAP_IFACE: Request interface statistics.
+ *
+ * @QCA_WLAN_LL_STATS_GET_REQ_BITMAP_ALL_PEER: Request all peer statistics.
+ *
+ * @QCA_WLAN_LL_STATS_GET_REQ_BITMAP_PER_PEER: Request per peer statistics.
+ */
+enum qca_wlan_ll_stats_get_req_bitmap {
+ QCA_WLAN_LL_STATS_GET_REQ_BITMAP_RADIO = BIT(0),
+ QCA_WLAN_LL_STATS_GET_REQ_BITMAP_IFACE = BIT(1),
+ QCA_WLAN_LL_STATS_GET_REQ_BITMAP_ALL_PEER = BIT(2),
+ QCA_WLAN_LL_STATS_GET_REQ_BITMAP_PER_PEER = BIT(3),
+};
+
enum qca_wlan_vendor_attr_ll_stats_get {
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_INVALID = 0,
/* Unsigned 32 bit value provided by the caller issuing the GET stats
@@ -4038,11 +4214,8 @@
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_ID = 1,
/* Unsigned 32 bit value - bit mask to identify what statistics are
- * requested for retrieval.
- * Radio Statistics 0x00000001
- * Interface Statistics 0x00000020
- * All Peer Statistics 0x00000040
- * Peer Statistics 0x00000080
+ * requested for retrieval specified in the enum
+ * qca_wlan_ll_stats_get_req_bitmap
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK = 2,
/* keep last */
@@ -4053,24 +4226,65 @@
enum qca_wlan_vendor_attr_ll_stats_results {
QCA_WLAN_VENDOR_ATTR_LL_STATS_INVALID = 0,
+
+ /*
+ * For Multi Link Operation (MLO) connection, per-link statistics will
+ * be sent inside of %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and
+ * cumulative statistics will be sent outside of
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK to maintain backward
+ * compatibility with legacy user space. Attributes which don't have
+ * explicit documentation for MLO will be sent only outside of
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK, such attributes values
+ * don't depend on whether the connection is MLO capable or not, e.g.,
+ * radio and channel specific attributes.
+ */
+
/* Unsigned 32bit value. Used by the driver; must match the request id
* provided with the QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET command.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_REQ_ID = 1,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_BEACON_RX = 2,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_RX = 3,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_RX = 4,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_TX = 5,
- /* Signed 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_MGMT = 6,
- /* Signed 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_DATA = 7,
- /* Signed 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_ACK = 8,
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_* are
@@ -4094,7 +4308,8 @@
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_CAPABILITIES = 13,
/* NULL terminated SSID. An array of 33 Unsigned 8bit values */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_SSID = 14,
- /* BSSID. An array of 6 unsigned 8 bit values */
+ /* For non-MLO connection, BSSID of the AP. For MLO connection, MLD
+ * address of the AP. An array of 6 unsigned 8 bit values */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_BSSID = 15,
/* Country string advertised by AP. An array of 3 unsigned 8 bit
* values.
@@ -4107,6 +4322,15 @@
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_* could
* be nested within the interface stats.
+ * For an MLO connection, all %QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_*
+ * attributes except %QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_*
+ * indicate the aggregate of all links outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_* attributes
+ * indicate value of the MLO link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ * These attributes indicate the link specific value inside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
*/
/* Type = enum wifi_traffic_ac, e.g., V0, VI, BE and BK */
@@ -4209,6 +4433,12 @@
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_LONG = 48,
+ /* Unsigned 32 bit value. This is used to indicate radio ID of the radio
+ * statistics when %QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE is
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_RADIO. This is also used
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK to indicate radio ID
+ * of the MLO link.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ID = 49,
/* Unsigned 32 bit value. Total number of msecs the radio is awake
* accruing over time.
@@ -4255,7 +4485,13 @@
/* Type = enum wifi_channel_width. Channel width, e.g., 20, 40, 80 */
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_WIDTH = 60,
- /* Unsigned 32 bit value. Primary 20 MHz channel. */
+ /* Unsigned 32 bit value. Primary 20 MHz channel. This is used to
+ * indicate the primary frequency of the channel when
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE is
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE_RADIO. This is also used inside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK to indicate the frequency
+ * on which the MLO link is operating.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ = 61,
/* Unsigned 32 bit value. Center frequency (MHz) first segment. */
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ0 = 62,
@@ -4285,7 +4521,9 @@
QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO = 67,
/* Signifies the nested list of peer info attributes
- * QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_*
+ * QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_*. For MLO connection,
+ * this also contains %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK_ID to
+ * indicate on which link the peer is connected.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO = 68,
@@ -4306,16 +4544,32 @@
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_MORE_DATA = 71,
- /* Unsigned 64 bit value */
+ /* Unsigned 64 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_AVERAGE_TSF_OFFSET = 72,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_DETECTED = 73,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_AVG_NUM_FRAMES_LEAKED = 74,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_GUARD_TIME = 75,
/* Unsigned 32 bit value */
@@ -4328,13 +4582,29 @@
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME_PER_LEVEL = 78,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_SUCC_CNT = 79,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_FAIL_CNT = 80,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_SUCC_CNT = 81,
- /* Unsigned 32 bit value */
+ /* Unsigned 32 bit value. For an MLO connection, indicates the value of
+ * the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
+ */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_FAIL_CNT = 82,
/* Unsigned int 32 value.
@@ -4358,12 +4628,18 @@
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_LOAD_PERCENTAGE = 86,
/* u8 value representing the time slicing duty cycle percentage.
- * Possible values are 0-100.
+ * Possible values are 0-100. For an MLO connection, indicates the value
+ * of the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_TS_DUTY_CYCLE = 87,
/* Unsigned 32 bit value. The number of Beacon frames which are received
* from the associated AP and indicate buffered unicast frame(s) for us
- * in the TIM element.
+ * in the TIM element. For an MLO connection, indicates the value of the
+ * link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_TIM_BEACON = 88,
/* Unsigned 32 bit value. The total number of Beacon frames received
@@ -4374,16 +4650,46 @@
* doesn’t receive any unicast data after this beacon.
* 2) The related TIM element is still set in the beacon for STA
* after STA has indicated power save exit by QoS Null Data frame.
+ * For an MLO connection, indicates the value of the link with the best
+ * RSSI outside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link
+ * specific value inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_TIM_BEACON_ERR = 89,
- /* Attribute used for padding for 64-bit alignment */
- QCA_WLAN_VENDOR_ATTR_LL_STATS_PAD = 90,
/* Signed 32 bit value. It represents the noise floor calibration value.
- * Possible values are -120~-50 dBm.
+ * Possible values are -120~-50 dBm. For an MLO connection, indicates
+ * the value of the link with the best RSSI outside
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK and the link specific value
+ * inside %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NF_CAL_VAL = 90,
+ /* Attribute used for padding for 64-bit alignment */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_PAD = 91,
+
+ /* Unsigned u8 value, link ID of an MLO link. Used inside nested
+ * attribute %QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK to represent the
+ * link ID of the MLO link for which the statistics are embedded in the
+ * nested attribute. Used inside nested attribute
+ * %QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO to represent the connected
+ * link ID of the peer.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK_ID = 92,
+
+ /* A nested array of attributes for each MLO link, each containing
+ * per-link statistics of a multi link connection. The attributes used
+ * inside this nested attribute are defined in enum
+ * qca_wlan_vendor_attr_ll_stats_results.
+ *
+ * For non-MLO connection, this attribute is not present and the
+ * statistics will be sent outside this attribute (without nesting).
+ *
+ * For MLO connection, this attribute is present and also cumulative
+ * statistics of all the links will be sent outside of this attribute
+ * to be compatible with legacy user space.
+ */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK = 93,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_LL_STATS_MAX =
@@ -4865,6 +5171,8 @@
* @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT: WPA3-SAE pre-authentication times
* out.
* @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL: WPA3-SAE pre-authentication fails.
+ * @QCA_ROAM_FAIL_REASON_CURR_AP_STILL_OK: Roam scan did not happen since the
+ * current network conditions are fine.
*/
enum qca_vendor_roam_fail_reasons {
QCA_ROAM_FAIL_REASON_NONE = 0,
@@ -4897,6 +5205,7 @@
QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID = 27,
QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT = 28,
QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL = 29,
+ QCA_ROAM_FAIL_REASON_CURR_AP_STILL_OK = 30,
};
/*
@@ -8558,9 +8867,19 @@
};
/**
- * enum qca_wlan_vendor_attr_he_omi_tx: Represents attributes for
- * HE operating mode control transmit request. These attributes are
- * sent as part of QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX and
+ * enum qca_wlan_emlsr_mode: Enhanced Multi-link Single Radio mode configuration
+ * @QCA_WLAN_EMLSR_MODE_ENTER: Enter EMLSR mode
+ * @QCA_WLAN_EMLSR_MODE_EXIT: Exit EMLSR mode
+ */
+enum qca_wlan_emlsr_mode {
+ QCA_WLAN_EMLSR_MODE_ENTER = 0,
+ QCA_WLAN_EMLSR_MODE_EXIT = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_omi_tx: Represents attributes for HE and
+ * EHT operating mode control transmit request. These attributes are
+ * sent as part of QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OMI_TX and
* QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
*
* @QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS: Mandatory 8-bit unsigned value
@@ -8590,21 +8909,48 @@
* 1 - Determine which HE TB PPDU types are allowed by the STA if UL MU disable
* bit is not set, else UL MU Tx is suspended.
*
+ * @QCA_WLAN_VENDOR_ATTR_EHT_OMI_RX_NSS_EXTN: 8-bit unsigned value in the EHT OM
+ * Control subfield combined with the Rx NSS subfield in the OM Control subfield
+ * indicates NSS - 1, where NSS is the maximum number of spatial streams that
+ * STA supports in reception for PPDU bandwidths less than or equal to 80 MHz.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EHT_OMI_CH_BW_EXTN: 8-bit unsigned value indicates
+ * 320 MHz operating channel width supported by the EHT STA for both reception
+ * and transmission.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EHT_OMI_TX_NSS_EXTN: 8-bit unsigned value in the EHT OM
+ * Control subfield combined with the Tx NSTS subfield in OM Control subfield
+ * indicates NSTS - 1, where NSTS is the maximum number of space-time streams
+ * that the STA supports in transmission for PPDU bandwidths less than or equal
+ * to 80 MHz.
*/
-enum qca_wlan_vendor_attr_he_omi_tx {
+enum qca_wlan_vendor_attr_omi_tx {
QCA_WLAN_VENDOR_ATTR_HE_OMI_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS = 1,
QCA_WLAN_VENDOR_ATTR_HE_OMI_CH_BW = 2,
QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DISABLE = 3,
QCA_WLAN_VENDOR_ATTR_HE_OMI_TX_NSTS = 4,
QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DATA_DISABLE = 5,
+ QCA_WLAN_VENDOR_ATTR_EHT_OMI_RX_NSS_EXTN = 6,
+ QCA_WLAN_VENDOR_ATTR_EHT_OMI_CH_BW_EXTN = 7,
+ QCA_WLAN_VENDOR_ATTR_EHT_OMI_TX_NSS_EXTN = 8,
/* keep last */
- QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST,
- QCA_WLAN_VENDOR_ATTR_HE_OMI_MAX =
- QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST - 1,
+ QCA_WLAN_VENDOR_ATTR_OMI_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OMI_MAX =
+ QCA_WLAN_VENDOR_ATTR_OMI_AFTER_LAST - 1,
};
+/* deprecated legacy names */
+#define QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX \
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OMI_TX
+#define qca_wlan_vendor_attr_he_omi_tx \
+ qca_wlan_vendor_attr_omi_tx
+#define QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST \
+ QCA_WLAN_VENDOR_ATTR_OMI_AFTER_LAST
+#define QCA_WLAN_VENDOR_ATTR_HE_OMI_MAX \
+ QCA_WLAN_VENDOR_ATTR_OMI_MAX
+
/**
* enum qca_wlan_vendor_phy_mode - Different PHY modes
* These values are used with %QCA_WLAN_VENDOR_ATTR_CONFIG_PHY_MODE.
@@ -8922,10 +9268,10 @@
* channel bandwidth, Tx Nsts and UL MU disable attributes.
* These nested attributes are used to send HE operating mode control
* with configured values.
- * Uses the enum qca_wlan_vendor_attr_he_omi_tx attributes.
+ * Uses the enum qca_wlan_vendor_attr_omi_tx attributes.
* This attribute is used to configure the testbed device.
*/
- QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX = 33,
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OMI_TX = 33,
/* 8-bit unsigned value to configure +HTC_HE support to indicate the
* support for the reception of a frame that carries an HE variant
@@ -9207,6 +9553,46 @@
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_EHT_TB_SOUNDING_FB_RL = 66,
+ /* 8-bit unsigned value to configure the support for receiving an MPDU
+ * that contains an EHT operating mode control subfield.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_EHT_OM_CTRL_SUPPORT = 67,
+
+ /* 8-bit unsigned value to configure the driver with EMLSR padding delay
+ * subfield value.
+ *
+ * 0 - 0 us
+ * 1 - 32 us
+ * 2 - 64 us
+ * 3 - 128 us
+ * 4 - 256 us
+ * 5-255 - Reserved
+ *
+ * This attribute is used for testing purposes.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_EMLSR_PADDING_DELAY = 68,
+
+ /*
+ * 8-bit unsigned value to indicate the firmware to force the active MLO
+ * links to power save mode for the configured number of beacon periods.
+ * This allows the firmware to suspend STA links for X beacon periods
+ * and remain asleep even if the AP advertises TIM as opposed to regular
+ * power save mode where STA links wake up if the AP indicates that it
+ * has buffered data to send.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FORCE_MLO_POWER_SAVE_BCN_PERIOD = 69,
+
+ /*
+ * 8-bit unsigned value to indicate the firmware to be in STR MLMR mode
+ * to enable simultaneous transmission of PPDUs on all active links.
+ * 0 - Default behavior
+ * 1 - Enter STR mode for simultaneous data transmission on all links
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_EHT_MLO_STR_TX = 70,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =
@@ -12194,9 +12580,13 @@
*
* @QCA_WLAN_CONCURRENT_AP_POLICY_GAMING_AUDIO: Select interface concurrencies
* to meet gaming audio latency requirements.
+ * This policy is used only when the driver advertises support for
+ * QCA_WLAN_VENDOR_FEATURE_ENHANCED_AUDIO_EXPERIENCE_OVER_WLAN.
*
* @QCA_WLAN_CONCURRENT_AP_POLICY_LOSSLESS_AUDIO_STREAMING: Select interface
* concurrencies to meet lossless audio streaming requirements.
+ * This policy is used only when the driver advertises support for
+ * QCA_WLAN_VENDOR_FEATURE_ENHANCED_AUDIO_EXPERIENCE_OVER_WLAN.
*
* @QCA_WLAN_CONCURRENT_AP_POLICY_XR: Select interface concurrencies to meet
* XR (eXtended Reality) requirements.
@@ -15117,4 +15507,100 @@
QCA_WLAN_VENDOR_ATTR_LINK_STATE_AFTER_LAST - 1,
};
+/**
+ * enum qca_wlan_vendor_attr_tid_link_map_status - Definition of attributes used
+ * inside nested attribute %QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_STATUS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_UPLINK: Required u16 attribute
+ * within nested attribute %QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_STATUS.
+ * Indicates the link mapping bitmap of a TID for uplink traffic. It is a
+ * bitmask of the link IDs in which a bit set means that the TID is mapped with
+ * that link ID in uplink traffic. Otherwise, the TID is not mapped to uplink
+ * traffic for that link.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_DOWNLINK: Required u16 attribute
+ * within nested attribute %QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_STATUS.
+ * Indicates the link mapping bitmap of a TID for downlink traffic. It is a
+ * bitmask of the link IDs in which a bit set means that the TID is mapped with
+ * that link ID in downlink traffic. Otherwise, the TID is not mapped to
+ * downlink traffic for that link.
+ */
+enum qca_wlan_vendor_attr_tid_link_map_status {
+ QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_UPLINK = 1,
+ QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_DOWNLINK = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_MAX =
+ QCA_WLAN_VENDOR_ATTR_LINK_TID_MAP_STATUS_AFTER_LAST - 1,
+};
+
+/*
+ * enum qca_wlan_vendor_attr_tid_to_link_map: Definition of attributes used with
+ * %QCA_NL80211_VENDOR_SUBCMD_TID_TO_LINK_MAP event.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_AP_MLD_ADDR: Required attribute. 6-byte
+ * AP MLD address with which this TID-to-link negotiation mapping is
+ * established/updated.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_STATUS: Optional attribute. Array of
+ * nested attributes containing TID-to-links mapping information. This will have
+ * TID-to-link mapping for TID0 to TID7, each containing the uplink and downlink
+ * map information. If this attribute is not present the default TID-to-link
+ * mapping is in use, i.e., all TIDs are mapped to all links for both uplink and
+ * downlink traffic.
+ * See enum qca_wlan_vendor_attr_tid_link_map_status for the nested attributes.
+ */
+enum qca_wlan_vendor_attr_tid_to_link_map {
+ QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_AP_MLD_ADDR = 1,
+ QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_STATUS = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_MAX =
+ QCA_WLAN_VENDOR_ATTR_TID_TO_LINK_MAP_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_link_reconfig: Definition of attributes used
+ * with %QCA_NL80211_VENDOR_SUBCMD_LINK_RECONFIG event.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_AP_MLD_ADDR: Required attribute.
+ * 6-byte AP MLD address of the AP which indicated the link reconfiguration.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_REMOVED_LINKS: Required u16 attribute.
+ * A bitmap of the removed setup links link IDs.
+ */
+enum qca_wlan_vendor_attr_link_reconfig {
+
+ QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_AP_MLD_ADDR = 1,
+ QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_REMOVED_LINKS = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_LINK_RECONFIG_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_tdls_disc_rsp_ext - Attributes used by
+ * %QCA_NL80211_VENDOR_SUBCMD_TDLS_DISC_RSP_EXT vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TDLS_DISC_RSP_EXT_TX_LINK: u8 attribute.
+ * Indicates the MLO link id on which the TDLS discovery response
+ * frame is to be transmitted.
+ */
+enum qca_wlan_vendor_attr_tdls_disc_rsp_ext {
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISC_RSP_EXT_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISC_RSP_EXT_TX_LINK = 1,
+
+ /* Keep last */
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISC_RSP_EXT_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISC_RSP_EXT_MAX =
+ QCA_WLAN_VENDOR_ATTR_TDLS_DISC_RSP_EXT_AFTER_LAST - 1,
+};
+
#endif /* QCA_VENDOR_H */