diff --git a/hostapd/Android.mk b/hostapd/Android.mk
index 59b71ab..df0dc95 100644
--- a/hostapd/Android.mk
+++ b/hostapd/Android.mk
@@ -581,6 +581,16 @@
 endif
 endif
 
+ifdef CONFIG_PASN
+L_CFLAGS += -DCONFIG_PASN
+L_CFLAGS += -DCONFIG_PTKSA_CACHE
+NEED_HMAC_SHA256_KDF=y
+NEED_HMAC_SHA384_KDF=y
+NEED_SHA256=y
+NEED_SHA384=y
+OBJS += src/common/ptksa_cache.c
+endif
+
 ifdef CONFIG_EAP_IKEV2
 L_CFLAGS += -DEAP_SERVER_IKEV2
 OBJS += src/eap_server/eap_server_ikev2.c src/eap_server/ikev2.c
diff --git a/hostapd/Makefile b/hostapd/Makefile
index 066bfae..ce7d215 100644
--- a/hostapd/Makefile
+++ b/hostapd/Makefile
@@ -599,6 +599,16 @@
 endif
 endif
 
+ifdef CONFIG_PASN
+CFLAGS += -DCONFIG_PASN
+CFLAGS += -DCONFIG_PTKSA_CACHE
+NEED_HMAC_SHA256_KDF=y
+NEED_HMAC_SHA384_KDF=y
+NEED_SHA256=y
+NEED_SHA384=y
+OBJS += ../src/common/ptksa_cache.o
+endif
+
 ifdef CONFIG_EAP_IKEV2
 CFLAGS += -DEAP_SERVER_IKEV2
 OBJS += ../src/eap_server/eap_server_ikev2.o ../src/eap_server/ikev2.o
diff --git a/hostapd/config_file.c b/hostapd/config_file.c
index efbfd80..03371e1 100644
--- a/hostapd/config_file.c
+++ b/hostapd/config_file.c
@@ -754,6 +754,10 @@
 		else if (os_strcmp(start, "OSEN") == 0)
 			val |= WPA_KEY_MGMT_OSEN;
 #endif /* CONFIG_HS20 */
+#ifdef CONFIG_PASN
+		else if (os_strcmp(start, "PASN") == 0)
+			val |= WPA_KEY_MGMT_PASN;
+#endif /* CONFIG_PASN */
 		else {
 			wpa_printf(MSG_ERROR, "Line %d: invalid key_mgmt '%s'",
 				   line, start);
@@ -1216,6 +1220,32 @@
 	return (u8) (mask & (val << find_bit_offset(mask)));
 }
 
+
+static int hostapd_parse_he_srg_bitmap(u8 *bitmap, char *val)
+{
+	int bitpos;
+	char *pos, *end;
+
+	os_memset(bitmap, 0, 8);
+	pos = val;
+	while (*pos != '\0') {
+		end = os_strchr(pos, ' ');
+		if (end)
+			*end = '\0';
+
+		bitpos = atoi(pos);
+		if (bitpos < 0 || bitpos > 64)
+			return -1;
+
+		bitmap[bitpos / 8] |= BIT(bitpos % 8);
+		if (!end)
+			break;
+		pos = end + 1;
+	}
+
+	return 0;
+}
+
 #endif /* CONFIG_IEEE80211AX */
 
 
@@ -3259,6 +3289,16 @@
 			}
 			conf->rate_type = BEACON_RATE_VHT;
 			conf->beacon_rate = val;
+		} else if (os_strncmp(pos, "he:", 3) == 0) {
+			val = atoi(pos + 3);
+			if (val < 0 || val > 11) {
+				wpa_printf(MSG_ERROR,
+					   "Line %d: invalid beacon_rate HE-MCS %d",
+					   line, val);
+				return 1;
+			}
+			conf->rate_type = BEACON_RATE_HE;
+			conf->beacon_rate = val;
 		} else {
 			val = atoi(pos);
 			if (val < 10 || val > 10000) {
@@ -3540,19 +3580,53 @@
 		conf->he_mu_edca.he_mu_ac_vo_param[HE_MU_AC_PARAM_TIMER_IDX] =
 			atoi(pos) & 0xff;
 	} else if (os_strcmp(buf, "he_spr_sr_control") == 0) {
-		conf->spr.sr_control = atoi(pos) & 0xff;
+		conf->spr.sr_control = atoi(pos) & 0x1f;
 	} else if (os_strcmp(buf, "he_spr_non_srg_obss_pd_max_offset") == 0) {
 		conf->spr.non_srg_obss_pd_max_offset = atoi(pos);
 	} else if (os_strcmp(buf, "he_spr_srg_obss_pd_min_offset") == 0) {
 		conf->spr.srg_obss_pd_min_offset = atoi(pos);
 	} else if (os_strcmp(buf, "he_spr_srg_obss_pd_max_offset") == 0) {
 		conf->spr.srg_obss_pd_max_offset = atoi(pos);
+	} else if (os_strcmp(buf, "he_spr_srg_bss_colors") == 0) {
+		if (hostapd_parse_he_srg_bitmap(
+			conf->spr.srg_bss_color_bitmap, pos)) {
+			wpa_printf(MSG_ERROR,
+				   "Line %d: Invalid srg bss colors list '%s'",
+				   line, pos);
+			return 1;
+		}
+	} else if (os_strcmp(buf, "he_spr_srg_partial_bssid") == 0) {
+		if (hostapd_parse_he_srg_bitmap(
+			conf->spr.srg_partial_bssid_bitmap, pos)) {
+			wpa_printf(MSG_ERROR,
+				   "Line %d: Invalid srg partial bssid list '%s'",
+				   line, pos);
+			return 1;
+		}
 	} else if (os_strcmp(buf, "he_oper_chwidth") == 0) {
 		conf->he_oper_chwidth = atoi(pos);
 	} else if (os_strcmp(buf, "he_oper_centr_freq_seg0_idx") == 0) {
 		conf->he_oper_centr_freq_seg0_idx = atoi(pos);
 	} else if (os_strcmp(buf, "he_oper_centr_freq_seg1_idx") == 0) {
 		conf->he_oper_centr_freq_seg1_idx = atoi(pos);
+	} else if (os_strcmp(buf, "he_6ghz_max_mpdu") == 0) {
+		conf->he_6ghz_max_mpdu = atoi(pos);
+	} else if (os_strcmp(buf, "he_6ghz_max_ampdu_len_exp") == 0) {
+		conf->he_6ghz_max_ampdu_len_exp = atoi(pos);
+	} else if (os_strcmp(buf, "he_6ghz_rx_ant_pat") == 0) {
+		conf->he_6ghz_rx_ant_pat = atoi(pos);
+	} else if (os_strcmp(buf, "he_6ghz_tx_ant_pat") == 0) {
+		conf->he_6ghz_tx_ant_pat = atoi(pos);
+	} else if (os_strcmp(buf, "unsol_bcast_probe_resp_interval") == 0) {
+		int val = atoi(pos);
+
+		if (val < 0 || val > 20) {
+			wpa_printf(MSG_ERROR,
+				   "Line %d: invalid unsol_bcast_probe_resp_interval value",
+				   line);
+			return 1;
+		}
+		bss->unsol_bcast_probe_resp_interval = val;
 #endif /* CONFIG_IEEE80211AX */
 	} else if (os_strcmp(buf, "max_listen_interval") == 0) {
 		bss->max_listen_interval = atoi(pos);
@@ -4363,11 +4437,17 @@
 		bss->dhcp_server_port = atoi(pos);
 	} else if (os_strcmp(buf, "dhcp_relay_port") == 0) {
 		bss->dhcp_relay_port = atoi(pos);
+	} else if (os_strcmp(buf, "fils_discovery_min_interval") == 0) {
+		bss->fils_discovery_min_int = atoi(pos);
+	} else if (os_strcmp(buf, "fils_discovery_max_interval") == 0) {
+		bss->fils_discovery_max_int = atoi(pos);
 #endif /* CONFIG_FILS */
 	} else if (os_strcmp(buf, "multicast_to_unicast") == 0) {
 		bss->multicast_to_unicast = atoi(pos);
 	} else if (os_strcmp(buf, "broadcast_deauth") == 0) {
 		bss->broadcast_deauth = atoi(pos);
+	} else if (os_strcmp(buf, "notify_mgmt_frames") == 0) {
+		bss->notify_mgmt_frames = atoi(pos);
 #ifdef CONFIG_DPP
 	} else if (os_strcmp(buf, "dpp_name") == 0) {
 		os_free(bss->dpp_name);
@@ -4454,6 +4534,8 @@
 		conf->rssi_reject_assoc_rssi = atoi(pos);
 	} else if (os_strcmp(buf, "rssi_reject_assoc_timeout") == 0) {
 		conf->rssi_reject_assoc_timeout = atoi(pos);
+	} else if (os_strcmp(buf, "rssi_ignore_probe_request") == 0) {
+		conf->rssi_ignore_probe_request = atoi(pos);
 	} else if (os_strcmp(buf, "pbss") == 0) {
 		bss->pbss = atoi(pos);
 	} else if (os_strcmp(buf, "transition_disable") == 0) {
@@ -4573,6 +4655,25 @@
 		}
 		bss->mka_psk_set |= MKA_PSK_SET_CKN;
 #endif /* CONFIG_MACSEC */
+	} else if (os_strcmp(buf, "disable_11n") == 0) {
+		bss->disable_11n = !!atoi(pos);
+	} else if (os_strcmp(buf, "disable_11ac") == 0) {
+		bss->disable_11ac = !!atoi(pos);
+	} else if (os_strcmp(buf, "disable_11ax") == 0) {
+		bss->disable_11ax = !!atoi(pos);
+#ifdef CONFIG_PASN
+#ifdef CONFIG_TESTING_OPTIONS
+	} else if (os_strcmp(buf, "force_kdk_derivation") == 0) {
+		bss->force_kdk_derivation = atoi(pos);
+#endif /* CONFIG_TESTING_OPTIONS */
+	} else if (os_strcmp(buf, "pasn_groups") == 0) {
+		if (hostapd_parse_intlist(&bss->pasn_groups, pos)) {
+			wpa_printf(MSG_ERROR,
+				   "Line %d: Invalid pasn_groups value '%s'",
+				   line, pos);
+			return 1;
+		}
+#endif /* CONFIG_PASN */
 	} else {
 		wpa_printf(MSG_ERROR,
 			   "Line %d: unknown configuration item '%s'",
diff --git a/hostapd/ctrl_iface.c b/hostapd/ctrl_iface.c
index 02b41fd..55f3da7 100644
--- a/hostapd/ctrl_iface.c
+++ b/hostapd/ctrl_iface.c
@@ -37,6 +37,7 @@
 #include "common/dpp.h"
 #endif /* CONFIG_DPP */
 #include "common/wpa_ctrl.h"
+#include "common/ptksa_cache.h"
 #include "crypto/tls.h"
 #include "drivers/driver.h"
 #include "eapol_auth/eapol_auth_sm.h"
@@ -1222,6 +1223,52 @@
 			return pos - buf;
 		pos += ret;
 	}
+
+	if (hapd->conf->multi_ap) {
+		struct hostapd_ssid *ssid = &hapd->conf->multi_ap_backhaul_ssid;
+
+		ret = os_snprintf(pos, end - pos, "multi_ap=%d\n",
+				  hapd->conf->multi_ap);
+		if (os_snprintf_error(end - pos, ret))
+			return pos - buf;
+		pos += ret;
+
+		if (ssid->ssid_len) {
+			ret = os_snprintf(pos, end - pos,
+					  "multi_ap_backhaul_ssid=%s\n",
+					  wpa_ssid_txt(ssid->ssid,
+						       ssid->ssid_len));
+			if (os_snprintf_error(end - pos, ret))
+				return pos - buf;
+			pos += ret;
+		}
+
+		if (hapd->conf->wps_state && hapd->conf->wpa &&
+			ssid->wpa_passphrase) {
+			ret = os_snprintf(pos, end - pos,
+					  "multi_ap_backhaul_wpa_passphrase=%s\n",
+					  ssid->wpa_passphrase);
+			if (os_snprintf_error(end - pos, ret))
+				return pos - buf;
+			pos += ret;
+		}
+
+		if (hapd->conf->wps_state && hapd->conf->wpa &&
+		    ssid->wpa_psk &&
+		    ssid->wpa_psk->group) {
+			char hex[PMK_LEN * 2 + 1];
+
+			wpa_snprintf_hex(hex, sizeof(hex), ssid->wpa_psk->psk,
+					 PMK_LEN);
+			ret = os_snprintf(pos, end - pos,
+					  "multi_ap_backhaul_wpa_psk=%s\n",
+					  hex);
+			forced_memzero(hex, sizeof(hex));
+			if (os_snprintf_error(end - pos, ret))
+				return pos - buf;
+			pos += ret;
+		}
+	}
 #endif /* CONFIG_WPS */
 
 	if (hapd->conf->wpa) {
@@ -1347,21 +1394,29 @@
 
 
 static int hostapd_ctrl_iface_set_band(struct hostapd_data *hapd,
-				       const char *band)
+				       const char *bands)
 {
 	union wpa_event_data event;
-	enum set_band setband;
+	u32 setband_mask = WPA_SETBAND_AUTO;
 
-	if (os_strcmp(band, "AUTO") == 0)
-		setband = WPA_SETBAND_AUTO;
-	else if (os_strcmp(band, "5G") == 0)
-		setband = WPA_SETBAND_5G;
-	else if (os_strcmp(band, "2G") == 0)
-		setband = WPA_SETBAND_2G;
-	else
-		return -1;
+	/*
+	 * For example:
+	 *  SET setband 2G,6G
+	 *  SET setband 5G
+	 *  SET setband AUTO
+	 */
+	if (!os_strstr(bands, "AUTO")) {
+		if (os_strstr(bands, "5G"))
+			setband_mask |= WPA_SETBAND_5G;
+		if (os_strstr(bands, "6G"))
+			setband_mask |= WPA_SETBAND_6G;
+		if (os_strstr(bands, "2G"))
+			setband_mask |= WPA_SETBAND_2G;
+		if (setband_mask == WPA_SETBAND_AUTO)
+			return -1;
+	}
 
-	if (hostapd_drv_set_band(hapd, setband) == 0) {
+	if (hostapd_drv_set_band(hapd, setband_mask) == 0) {
 		os_memset(&event, 0, sizeof(event));
 		event.channel_list_changed.initiator = REGDOM_SET_BY_USER;
 		event.channel_list_changed.type = REGDOM_TYPE_UNKNOWN;
@@ -2675,9 +2730,9 @@
 
 	for (i = 0; i < iface->num_bss; i++) {
 
-		/* Save CHAN_SWITCH VHT config */
-		hostapd_chan_switch_vht_config(
-			iface->bss[i], settings.freq_params.vht_enabled);
+		/* Save CHAN_SWITCH VHT and HE config */
+		hostapd_chan_switch_config(iface->bss[i],
+					   &settings.freq_params);
 
 		ret = hostapd_switch_channel(iface->bss[i], &settings);
 		if (ret) {
@@ -2711,13 +2766,17 @@
 				     char *buf, size_t buflen)
 {
 	int ret;
-	char *pos;
+	char *pos, *temp = NULL;
 	u8 *data = NULL;
 	unsigned int vendor_id, subcmd;
+	enum nested_attr nested_attr_flag = NESTED_ATTR_UNSPECIFIED;
 	struct wpabuf *reply;
 	size_t data_len = 0;
 
-	/* cmd: <vendor id> <subcommand id> [<hex formatted data>] */
+	/**
+	 * cmd: <vendor id> <subcommand id> [<hex formatted data>]
+	 * [nested=<0|1>]
+	 */
 	vendor_id = strtoul(cmd, &pos, 16);
 	if (!isblank((unsigned char) *pos))
 		return -EINVAL;
@@ -2727,7 +2786,9 @@
 	if (*pos != '\0') {
 		if (!isblank((unsigned char) *pos++))
 			return -EINVAL;
-		data_len = os_strlen(pos);
+
+		temp = os_strchr(pos, ' ');
+		data_len = temp ? (size_t) (temp - pos) : os_strlen(pos);
 	}
 
 	if (data_len) {
@@ -2744,6 +2805,11 @@
 		}
 	}
 
+	pos = os_strstr(cmd, "nested=");
+	if (pos)
+		nested_attr_flag = atoi(pos + 7) ? NESTED_ATTR_USED :
+			NESTED_ATTR_NOT_USED;
+
 	reply = wpabuf_alloc((buflen - 1) / 2);
 	if (!reply) {
 		os_free(data);
@@ -2751,7 +2817,7 @@
 	}
 
 	ret = hostapd_drv_vendor_cmd(hapd, vendor_id, subcmd, data, data_len,
-				     reply);
+				     nested_attr_flag, reply);
 
 	if (ret == 0)
 		ret = wpa_snprintf_hex(buf, buflen, wpabuf_head_u8(reply),
@@ -3619,16 +3685,17 @@
 		eloop_terminate();
 	} else if (os_strncmp(buf, "ACCEPT_ACL ", 11) == 0) {
 		if (os_strncmp(buf + 11, "ADD_MAC ", 8) == 0) {
-			if (!hostapd_ctrl_iface_acl_add_mac(
+			if (hostapd_ctrl_iface_acl_add_mac(
+				    &hapd->conf->accept_mac,
+				    &hapd->conf->num_accept_mac, buf + 19))
+				reply_len = -1;
+		} else if (os_strncmp((buf + 11), "DEL_MAC ", 8) == 0) {
+			if (!hostapd_ctrl_iface_acl_del_mac(
 				    &hapd->conf->accept_mac,
 				    &hapd->conf->num_accept_mac, buf + 19))
 				hostapd_disassoc_accept_mac(hapd);
 			else
 				reply_len = -1;
-		} else if (os_strncmp((buf + 11), "DEL_MAC ", 8) == 0) {
-			hostapd_ctrl_iface_acl_del_mac(
-				&hapd->conf->accept_mac,
-				&hapd->conf->num_accept_mac, buf + 19);
 		} else if (os_strcmp(buf + 11, "SHOW") == 0) {
 			reply_len = hostapd_ctrl_iface_acl_show_mac(
 				hapd->conf->accept_mac,
@@ -3637,6 +3704,7 @@
 			hostapd_ctrl_iface_acl_clear_list(
 				&hapd->conf->accept_mac,
 				&hapd->conf->num_accept_mac);
+			hostapd_disassoc_accept_mac(hapd);
 		}
 	} else if (os_strncmp(buf, "DENY_ACL ", 9) == 0) {
 		if (os_strncmp(buf + 9, "ADD_MAC ", 8) == 0) {
@@ -3644,10 +3712,13 @@
 				    &hapd->conf->deny_mac,
 				    &hapd->conf->num_deny_mac, buf + 17))
 				hostapd_disassoc_deny_mac(hapd);
+			else
+				reply_len = -1;
 		} else if (os_strncmp(buf + 9, "DEL_MAC ", 8) == 0) {
-			hostapd_ctrl_iface_acl_del_mac(
-				&hapd->conf->deny_mac,
-				&hapd->conf->num_deny_mac, buf + 17);
+			if (hostapd_ctrl_iface_acl_del_mac(
+				    &hapd->conf->deny_mac,
+				    &hapd->conf->num_deny_mac, buf + 17))
+				reply_len = -1;
 		} else if (os_strcmp(buf + 9, "SHOW") == 0) {
 			reply_len = hostapd_ctrl_iface_acl_show_mac(
 				hapd->conf->deny_mac,
@@ -3795,6 +3866,10 @@
 	} else if (os_strncmp(buf, "GET_CAPABILITY ", 15) == 0) {
 		reply_len = hostapd_ctrl_iface_get_capability(
 			hapd, buf + 15, reply, reply_size);
+#ifdef CONFIG_PASN
+	} else if (os_strcmp(buf, "PTKSA_CACHE_LIST") == 0) {
+		reply_len = ptksa_cache_list(hapd->ptksa, reply, reply_size);
+#endif /* CONFIG_PASN */
 	} else {
 		os_memcpy(reply, "UNKNOWN COMMAND\n", 16);
 		reply_len = 16;
diff --git a/hostapd/defconfig b/hostapd/defconfig
index 11eed99..d7626a2 100644
--- a/hostapd/defconfig
+++ b/hostapd/defconfig
@@ -400,3 +400,10 @@
 # build includes this to allow mixed mode WPA+WPA2 networks to be enabled, but
 # that functionality is subject to be removed in the future.
 #CONFIG_NO_TKIP=y
+
+# Pre-Association Security Negotiation (PASN)
+# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
+# design is still subject to change. As such, this should not yet be enabled in
+# production use.
+# This requires CONFIG_IEEE80211W=y to be enabled, too.
+#CONFIG_PASN=y
diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index bf89fbc..a3d28ef 100644
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -279,6 +279,8 @@
 #    beacon_rate=ht:<HT MCS>
 # VHT:
 #    beacon_rate=vht:<VHT MCS>
+# HE:
+#    beacon_rate=he:<HE MCS>
 #
 # For example, beacon_rate=10 for 1 Mbps or beacon_rate=60 for 6 Mbps (OFDM).
 #beacon_rate=10
@@ -571,6 +573,10 @@
 # Default: 1 (enabled)
 #broadcast_deauth=1
 
+# Get notifications for received Management frames on control interface
+# Default: 0 (disabled)
+#notify_mgmt_frames=0
+
 ##### IEEE 802.11n related configuration ######################################
 
 # ieee80211n: Whether IEEE 802.11n (HT) is enabled
@@ -580,6 +586,9 @@
 # Note: hw_mode=g (2.4 GHz) and hw_mode=a (5 GHz) is used to specify the band.
 #ieee80211n=1
 
+# disable_11n: Boolean (0/1) to disable HT for a specific BSS
+#disable_11n=0
+
 # ht_capab: HT capabilities (list of flags)
 # LDPC coding capability: [LDPC] = supported
 # Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary
@@ -632,6 +641,9 @@
 # Note: hw_mode=a is used to specify that 5 GHz band is used with VHT.
 #ieee80211ac=1
 
+# disable_11ac: Boolean (0/1) to disable VHT for a specific BSS
+#disable_11ac=0
+
 # vht_capab: VHT capabilities (list of flags)
 #
 # vht_max_mpdu_len: [MAX-MPDU-7991] [MAX-MPDU-11454]
@@ -786,6 +798,9 @@
 # 1 = enabled
 #ieee80211ax=1
 
+# disable_11ax: Boolean (0/1) to disable HE for a specific BSS
+#disable_11ax=0
+
 #he_su_beamformer: HE single user beamformer support
 # 0 = not supported (default)
 # 1 = supported
@@ -866,6 +881,65 @@
 #he_spr_non_srg_obss_pd_max_offset
 #he_spr_srg_obss_pd_min_offset
 #he_spr_srg_obss_pd_max_offset
+#
+# SPR SRG BSS Color
+# This config represents SRG BSS Color Bitmap field of Spatial Reuse Parameter
+# Set element that indicates the BSS color values used by members of the
+# SRG of which the transmitting STA is a member. The value is in range of 0-63.
+#he_spr_srg_bss_colors=1 2 10 63
+#
+# SPR SRG Partial BSSID
+# This config represents SRG Partial BSSID Bitmap field of Spatial Reuse
+# Parameter Set element that indicates the Partial BSSID values used by members
+# of the SRG of which the transmitting STA is a member. The value range
+# corresponds to one of the 64 possible values of BSSID[39:44], where the lowest
+# numbered bit corresponds to Partial BSSID value 0 and the highest numbered bit
+# corresponds to Partial BSSID value 63.
+#he_spr_srg_partial_bssid=0 1 3 63
+#
+#he_6ghz_max_mpdu: Maximum MPDU Length of HE 6 GHz band capabilities.
+# Indicates maximum MPDU length
+# 0 = 3895 octets
+# 1 = 7991 octets
+# 2 = 11454 octets (default)
+#he_6ghz_max_mpdu=2
+#
+#he_6ghz_max_ampdu_len_exp: Maximum A-MPDU Length Exponent of HE 6 GHz band
+# capabilities. Indicates the maximum length of A-MPDU pre-EOF padding that
+# the STA can receive. This field is an integer in the range of 0 to 7.
+# The length defined by this field is equal to
+# 2 pow(13 + Maximum A-MPDU Length Exponent) -1 octets
+# 0 = AMPDU length of 8k
+# 1 = AMPDU length of 16k
+# 2 = AMPDU length of 32k
+# 3 = AMPDU length of 65k
+# 4 = AMPDU length of 131k
+# 5 = AMPDU length of 262k
+# 6 = AMPDU length of 524k
+# 7 = AMPDU length of 1048k (default)
+#he_6ghz_max_ampdu_len_exp=7
+#
+#he_6ghz_rx_ant_pat: Rx Antenna Pattern Consistency of HE 6 GHz capability.
+# Indicates the possibility of Rx antenna pattern change
+# 0 = Rx antenna pattern might change during the lifetime of an association
+# 1 = Rx antenna pattern does not change during the lifetime of an association
+#     (default)
+#he_6ghz_rx_ant_pat=1
+#
+#he_6ghz_tx_ant_pat: Tx Antenna Pattern Consistency of HE 6 GHz capability.
+# Indicates the possibility of Tx antenna pattern change
+# 0 = Tx antenna pattern might change during the lifetime of an association
+# 1 = Tx antenna pattern does not change during the lifetime of an association
+#     (default)
+#he_6ghz_tx_ant_pat=1
+
+# Unsolicited broadcast Probe Response transmission settings
+# This is for the 6 GHz band only. If the interval is set to a non-zero value,
+# the AP schedules unsolicited broadcast Probe Response frames to be
+# transmitted for in-band discovery. Refer to
+# IEEE P802.11ax/D8.0 26.17.2.3.2, AP behavior for fast passive scanning.
+# Valid range: 0..20 TUs; default is 0 (disabled)
+#unsol_bcast_probe_resp_interval=0
 
 ##### IEEE 802.1X-2004 related configuration ##################################
 
@@ -1712,7 +1786,8 @@
 #group_mgmt_cipher=AES-128-CMAC
 
 # Beacon Protection (management frame protection for Beacon frames)
-# This depends on management frame protection being enabled (ieee80211w != 0).
+# This depends on management frame protection being enabled (ieee80211w != 0)
+# and beacon protection support indication from the driver.
 # 0 = disabled (default)
 # 1 = enabled
 #beacon_prot=0
@@ -1729,6 +1804,9 @@
 
 # ocv: Operating Channel Validation
 # This is a countermeasure against multi-channel man-in-the-middle attacks.
+# Enabling this depends on the driver's support for OCV when the driver SME is
+# used. If hostapd SME is used, this will be enabled just based on this
+# configuration.
 # Enabling this automatically also enables ieee80211w, if not yet enabled.
 # 0 = disabled (default)
 # 1 = enabled
@@ -1921,6 +1999,13 @@
 # default: 30 TUs (= 30.72 milliseconds)
 #fils_hlp_wait_time=30
 
+# FILS Discovery frame transmission minimum and maximum interval settings.
+# If fils_discovery_max_interval is non-zero, the AP enables FILS Discovery
+# frame transmission. These values use TUs as the unit and have allowed range
+# of 0-10000. fils_discovery_min_interval defaults to 20.
+#fils_discovery_min_interval=20
+#fils_discovery_max_interval=0
+
 # Transition Disable indication
 # The AP can notify authenticated stations to disable transition mode in their
 # network profiles when the network has completed transition steps, i.e., once
@@ -1938,6 +2023,14 @@
 # (default: 0 = do not include Transition Disable KDE)
 #transition_disable=0x01
 
+# PASN ECDH groups
+# PASN implementations are required to support group 19 (NIST P-256). If this
+# parameter is not set, only group 19 is supported by default. This
+# configuration parameter can be used to specify a limited set of allowed
+# groups. The group values are listed in the IANA registry:
+# http://www.iana.org/assignments/ipsec-registry/ipsec-registry.xml#ipsec-registry-10
+#pasn_groups=19 20 21
+
 ##### IEEE 802.11r configuration ##############################################
 
 # Mobility Domain identifier (dot11FTMobilityDomainID, MDID)
@@ -2726,6 +2819,10 @@
 # threshold (range: 0..255, default=30).
 #rssi_reject_assoc_timeout=30
 
+# Ignore Probe Request frames if RSSI is below given threshold (in dBm)
+# Allowed range: -60 to -90 dBm; default = 0 (rejection disabled)
+#rssi_ignore_probe_request=-75
+
 ##### Fast Session Transfer (FST) support #####################################
 #
 # The options in this section are only available when the build configuration
diff --git a/hostapd/hostapd_cli.c b/hostapd/hostapd_cli.c
index ad43981..249e466 100644
--- a/hostapd/hostapd_cli.c
+++ b/hostapd/hostapd_cli.c
@@ -1227,14 +1227,15 @@
 	char cmd[256];
 	int res;
 
-	if (argc < 2 || argc > 3) {
+	if (argc < 2 || argc > 4) {
 		printf("Invalid vendor command\n"
-		       "usage: <vendor id> <command id> [<hex formatted command argument>]\n");
+		       "usage: <vendor id> <command id> [<hex formatted command argument>] [nested=<0|1>]\n");
 		return -1;
 	}
 
-	res = os_snprintf(cmd, sizeof(cmd), "VENDOR %s %s %s", argv[0], argv[1],
-			  argc == 3 ? argv[2] : "");
+	res = os_snprintf(cmd, sizeof(cmd), "VENDOR %s %s %s%s%s", argv[0],
+			  argv[1], argc >= 3 ? argv[2] : "",
+			  argc == 4 ? " " : "", argc == 4 ? argv[3] : "");
 	if (os_snprintf_error(sizeof(cmd), res)) {
 		printf("Too long VENDOR command.\n");
 		return -1;
@@ -1474,6 +1475,20 @@
 
 #ifdef CONFIG_DPP2
 
+static int hostapd_cli_cmd_dpp_controller_start(struct wpa_ctrl *ctrl, int argc,
+						char *argv[])
+{
+	return hostapd_cli_cmd(ctrl, "DPP_CONTROLLER_START", 1, argc, argv);
+}
+
+
+static int hostapd_cli_cmd_dpp_controller_stop(struct wpa_ctrl *ctrl, int argc,
+					       char *argv[])
+{
+	return wpa_ctrl_command(ctrl, "DPP_CONTROLLER_STOP");
+}
+
+
 static int hostapd_cli_cmd_dpp_chirp(struct wpa_ctrl *ctrl, int argc,
 				     char *argv[])
 {
@@ -1697,6 +1712,10 @@
 	{ "dpp_pkex_remove", hostapd_cli_cmd_dpp_pkex_remove, NULL,
 	  "*|<id> = remove DPP pkex information" },
 #ifdef CONFIG_DPP2
+	{ "dpp_controller_start", hostapd_cli_cmd_dpp_controller_start, NULL,
+	  "[tcp_port=<port>] [role=..] = start DPP controller" },
+	{ "dpp_controller_stop", hostapd_cli_cmd_dpp_controller_stop, NULL,
+	  "= stop DPP controller" },
 	{ "dpp_chirp", hostapd_cli_cmd_dpp_chirp, NULL,
 	  "own=<BI ID> iter=<count> = start DPP chirp" },
 	{ "dpp_stop_chirp", hostapd_cli_cmd_dpp_stop_chirp, NULL,
diff --git a/src/ap/ap_config.c b/src/ap/ap_config.c
index f0e4236..b0d8ec8 100644
--- a/src/ap/ap_config.c
+++ b/src/ap/ap_config.c
@@ -131,6 +131,7 @@
 	bss->fils_hlp_wait_time = 30;
 	bss->dhcp_server_port = DHCP_SERVER_PORT;
 	bss->dhcp_relay_port = DHCP_SERVER_PORT;
+	bss->fils_discovery_min_int = 20;
 #endif /* CONFIG_FILS */
 
 	bss->broadcast_deauth = 1;
@@ -270,6 +271,10 @@
 	conf->he_op.he_bss_color_disabled = 1;
 	conf->he_op.he_bss_color_partial = 0;
 	conf->he_op.he_bss_color = 1;
+	conf->he_6ghz_max_mpdu = 2;
+	conf->he_6ghz_max_ampdu_len_exp = 7;
+	conf->he_6ghz_rx_ant_pat = 1;
+	conf->he_6ghz_tx_ant_pat = 1;
 #endif /* CONFIG_IEEE80211AX */
 
 	/* The third octet of the country string uses an ASCII space character
@@ -957,6 +962,10 @@
 	}
 #endif /* CONFIG_AIRTIME_POLICY */
 
+#ifdef CONFIG_PASN
+	os_free(conf->pasn_groups);
+#endif /* CONFIG_PASN */
+
 	os_free(conf);
 }
 
@@ -1152,10 +1161,54 @@
 #endif /* CONFIG_SAE_PK */
 
 
+static bool hostapd_config_check_bss_6g(struct hostapd_bss_config *bss)
+{
+	if (bss->wpa != WPA_PROTO_RSN) {
+		wpa_printf(MSG_ERROR,
+			   "Pre-RSNA security methods are not allowed in 6 GHz");
+		return false;
+	}
+
+	if (bss->ieee80211w != MGMT_FRAME_PROTECTION_REQUIRED) {
+		wpa_printf(MSG_ERROR,
+			   "Management frame protection is required in 6 GHz");
+		return false;
+	}
+
+	if (bss->wpa_key_mgmt & (WPA_KEY_MGMT_PSK |
+				 WPA_KEY_MGMT_FT_PSK |
+				 WPA_KEY_MGMT_PSK_SHA256)) {
+		wpa_printf(MSG_ERROR, "Invalid AKM suite for 6 GHz");
+		return false;
+	}
+
+	if (bss->rsn_pairwise & (WPA_CIPHER_WEP40 |
+				 WPA_CIPHER_WEP104 |
+				 WPA_CIPHER_TKIP)) {
+		wpa_printf(MSG_ERROR,
+			   "Invalid pairwise cipher suite for 6 GHz");
+		return false;
+	}
+
+	if (bss->wpa_group & (WPA_CIPHER_WEP40 |
+			      WPA_CIPHER_WEP104 |
+			      WPA_CIPHER_TKIP)) {
+		wpa_printf(MSG_ERROR, "Invalid group cipher suite for 6 GHz");
+		return false;
+	}
+
+	return true;
+}
+
+
 static int hostapd_config_check_bss(struct hostapd_bss_config *bss,
 				    struct hostapd_config *conf,
 				    int full_config)
 {
+	if (full_config && is_6ghz_op_class(conf->op_class) &&
+	    !hostapd_config_check_bss_6g(bss))
+		return -1;
+
 	if (full_config && bss->ieee802_1x && !bss->eap_server &&
 	    !bss->radius->auth_servers) {
 		wpa_printf(MSG_ERROR, "Invalid IEEE 802.1X configuration (no "
@@ -1231,7 +1284,7 @@
 
 	if (full_config && conf->ieee80211n &&
 	    conf->hw_mode == HOSTAPD_MODE_IEEE80211B) {
-		bss->disable_11n = 1;
+		bss->disable_11n = true;
 		wpa_printf(MSG_ERROR, "HT (IEEE 802.11n) in 11b mode is not "
 			   "allowed, disabling HT capabilities");
 	}
@@ -1239,7 +1292,7 @@
 #ifdef CONFIG_WEP
 	if (full_config && conf->ieee80211n &&
 	    bss->ssid.security_policy == SECURITY_STATIC_WEP) {
-		bss->disable_11n = 1;
+		bss->disable_11n = true;
 		wpa_printf(MSG_ERROR, "HT (IEEE 802.11n) with WEP is not "
 			   "allowed, disabling HT capabilities");
 	}
@@ -1250,7 +1303,7 @@
 	    !(bss->rsn_pairwise & (WPA_CIPHER_CCMP | WPA_CIPHER_GCMP |
 				   WPA_CIPHER_CCMP_256 | WPA_CIPHER_GCMP_256)))
 	{
-		bss->disable_11n = 1;
+		bss->disable_11n = true;
 		wpa_printf(MSG_ERROR, "HT (IEEE 802.11n) with WPA/WPA2 "
 			   "requires CCMP/GCMP to be enabled, disabling HT "
 			   "capabilities");
@@ -1260,7 +1313,7 @@
 #ifdef CONFIG_WEP
 	if (full_config && conf->ieee80211ac &&
 	    bss->ssid.security_policy == SECURITY_STATIC_WEP) {
-		bss->disable_11ac = 1;
+		bss->disable_11ac = true;
 		wpa_printf(MSG_ERROR,
 			   "VHT (IEEE 802.11ac) with WEP is not allowed, disabling VHT capabilities");
 	}
@@ -1271,12 +1324,33 @@
 	    !(bss->rsn_pairwise & (WPA_CIPHER_CCMP | WPA_CIPHER_GCMP |
 				   WPA_CIPHER_CCMP_256 | WPA_CIPHER_GCMP_256)))
 	{
-		bss->disable_11ac = 1;
+		bss->disable_11ac = true;
 		wpa_printf(MSG_ERROR,
 			   "VHT (IEEE 802.11ac) with WPA/WPA2 requires CCMP/GCMP to be enabled, disabling VHT capabilities");
 	}
 #endif /* CONFIG_IEEE80211AC */
 
+#ifdef CONFIG_IEEE80211AX
+#ifdef CONFIG_WEP
+	if (full_config && conf->ieee80211ax &&
+	    bss->ssid.security_policy == SECURITY_STATIC_WEP) {
+		bss->disable_11ax = true;
+		wpa_printf(MSG_ERROR,
+			   "HE (IEEE 802.11ax) with WEP is not allowed, disabling HE capabilities");
+	}
+#endif /* CONFIG_WEP */
+
+	if (full_config && conf->ieee80211ax && bss->wpa &&
+	    !(bss->wpa_pairwise & WPA_CIPHER_CCMP) &&
+	    !(bss->rsn_pairwise & (WPA_CIPHER_CCMP | WPA_CIPHER_GCMP |
+				   WPA_CIPHER_CCMP_256 | WPA_CIPHER_GCMP_256)))
+	{
+		bss->disable_11ax = true;
+		wpa_printf(MSG_ERROR,
+			   "HE (IEEE 802.11ax) with WPA/WPA2 requires CCMP/GCMP to be enabled, disabling HE capabilities");
+	}
+#endif /* CONFIG_IEEE80211AX */
+
 #ifdef CONFIG_WPS
 	if (full_config && bss->wps_state && bss->ignore_broadcast_ssid) {
 		wpa_printf(MSG_INFO, "WPS: ignore_broadcast_ssid "
diff --git a/src/ap/ap_config.h b/src/ap/ap_config.h
index 0cb4b52..e1b17f5 100644
--- a/src/ap/ap_config.h
+++ b/src/ap/ap_config.h
@@ -531,8 +531,9 @@
 #define TDLS_PROHIBIT BIT(0)
 #define TDLS_PROHIBIT_CHAN_SWITCH BIT(1)
 	int tdls;
-	int disable_11n;
-	int disable_11ac;
+	bool disable_11n;
+	bool disable_11ac;
+	bool disable_11ax;
 
 	/* IEEE 802.11v */
 	int time_advertisement;
@@ -729,12 +730,16 @@
 	unsigned int fils_hlp_wait_time;
 	u16 dhcp_server_port;
 	u16 dhcp_relay_port;
+	u32 fils_discovery_min_int;
+	u32 fils_discovery_max_int;
 #endif /* CONFIG_FILS */
 
 	int multicast_to_unicast;
 
 	int broadcast_deauth;
 
+	int notify_mgmt_frames;
+
 #ifdef CONFIG_DPP
 	char *dpp_name;
 	char *dpp_mud_url;
@@ -861,6 +866,20 @@
 	 */
 	u8 mka_psk_set;
 #endif /* CONFIG_MACSEC */
+
+#ifdef CONFIG_PASN
+#ifdef CONFIG_TESTING_OPTIONS
+	/*
+	 * Normally, KDK should be derived if and only if both sides support
+	 * secure LTF. Allow forcing KDK derivation for testing purposes.
+	 */
+	int force_kdk_derivation;
+#endif /* CONFIG_TESTING_OPTIONS */
+
+	int *pasn_groups;
+#endif /* CONFIG_PASN */
+
+	unsigned int unsol_bcast_probe_resp_interval;
 };
 
 /**
@@ -893,8 +912,8 @@
 	u8 non_srg_obss_pd_max_offset;
 	u8 srg_obss_pd_min_offset;
 	u8 srg_obss_pd_max_offset;
-	u8 srg_obss_color_bitmap;
-	u8 srg_obss_color_partial_bitmap;
+	u8 srg_bss_color_bitmap[8];
+	u8 srg_partial_bssid_bitmap[8];
 };
 
 /**
@@ -1031,6 +1050,10 @@
 	u8 he_oper_chwidth;
 	u8 he_oper_centr_freq_seg0_idx;
 	u8 he_oper_centr_freq_seg1_idx;
+	u8 he_6ghz_max_mpdu;
+	u8 he_6ghz_max_ampdu_len_exp;
+	u8 he_6ghz_rx_ant_pat;
+	u8 he_6ghz_tx_ant_pat;
 #endif /* CONFIG_IEEE80211AX */
 
 	/* VHT enable/disable config from CHAN_SWITCH */
@@ -1038,8 +1061,14 @@
 #define CH_SWITCH_VHT_DISABLED BIT(1)
 	unsigned int ch_switch_vht_config;
 
+	/* HE enable/disable config from CHAN_SWITCH */
+#define CH_SWITCH_HE_ENABLED BIT(0)
+#define CH_SWITCH_HE_DISABLED BIT(1)
+	unsigned int ch_switch_he_config;
+
 	int rssi_reject_assoc_rssi;
 	int rssi_reject_assoc_timeout;
+	int rssi_ignore_probe_request;
 
 #ifdef CONFIG_AIRTIME_POLICY
 	enum {
diff --git a/src/ap/ap_drv_ops.c b/src/ap/ap_drv_ops.c
index f157659..d1642d7 100644
--- a/src/ap/ap_drv_ops.c
+++ b/src/ap/ap_drv_ops.c
@@ -988,3 +988,11 @@
 	return hapd->driver->update_dh_ie(hapd->drv_priv, peer, reason_code,
 					  ie, ielen);
 }
+
+
+int hostapd_drv_dpp_listen(struct hostapd_data *hapd, bool enable)
+{
+	if (!hapd->driver || !hapd->driver->dpp_listen || !hapd->drv_priv)
+		return 0;
+	return hapd->driver->dpp_listen(hapd->drv_priv, enable);
+}
diff --git a/src/ap/ap_drv_ops.h b/src/ap/ap_drv_ops.h
index 5738c1c..582ab61 100644
--- a/src/ap/ap_drv_ops.h
+++ b/src/ap/ap_drv_ops.h
@@ -134,6 +134,7 @@
 int hostapd_drv_do_acs(struct hostapd_data *hapd);
 int hostapd_drv_update_dh_ie(struct hostapd_data *hapd, const u8 *peer,
 			     u16 reason_code, const u8 *ie, size_t ielen);
+int hostapd_drv_dpp_listen(struct hostapd_data *hapd, bool enable);
 
 
 #include "drivers/driver.h"
@@ -350,12 +351,13 @@
 static inline int hostapd_drv_vendor_cmd(struct hostapd_data *hapd,
 					 int vendor_id, int subcmd,
 					 const u8 *data, size_t data_len,
+					 enum nested_attr nested_attr_flag,
 					 struct wpabuf *buf)
 {
 	if (hapd->driver == NULL || hapd->driver->vendor_cmd == NULL)
 		return -1;
 	return hapd->driver->vendor_cmd(hapd->drv_priv, vendor_id, subcmd, data,
-					data_len, buf);
+					data_len, nested_attr_flag, buf);
 }
 
 static inline int hostapd_drv_stop_ap(struct hostapd_data *hapd)
@@ -384,11 +386,11 @@
 }
 
 static inline int
-hostapd_drv_set_band(struct hostapd_data *hapd, enum set_band band)
+hostapd_drv_set_band(struct hostapd_data *hapd, u32 band_mask)
 {
 	if (!hapd->driver || !hapd->drv_priv || !hapd->driver->set_band)
 		return -1;
-	return hapd->driver->set_band(hapd->drv_priv, band);
+	return hapd->driver->set_band(hapd->drv_priv, band_mask);
 }
 
 #endif /* AP_DRV_OPS */
diff --git a/src/ap/beacon.c b/src/ap/beacon.c
index b3b33b7..7d9e8b9 100644
--- a/src/ap/beacon.c
+++ b/src/ap/beacon.c
@@ -266,7 +266,7 @@
 }
 
 
-static const u8 * hostapd_wpa_ie(struct hostapd_data *hapd, u8 eid)
+const u8 * hostapd_wpa_ie(struct hostapd_data *hapd, u8 eid)
 {
 	const u8 *ies;
 	size_t ies_len;
@@ -458,7 +458,7 @@
 	}
 
 #ifdef CONFIG_IEEE80211AX
-	if (hapd->iconf->ieee80211ax) {
+	if (hapd->iconf->ieee80211ax && !hapd->conf->disable_11ax) {
 		buflen += 3 + sizeof(struct ieee80211_he_capabilities) +
 			3 + sizeof(struct ieee80211_he_operation) +
 			3 + sizeof(struct ieee80211_he_mu_edca_parameter_set) +
@@ -563,15 +563,21 @@
 	}
 #endif /* CONFIG_IEEE80211AC */
 
+#ifdef CONFIG_IEEE80211AX
+	if (hapd->iconf->ieee80211ax && !hapd->conf->disable_11ax &&
+	    is_6ghz_op_class(hapd->iconf->op_class))
+		pos = hostapd_eid_txpower_envelope(hapd, pos);
+#endif /* CONFIG_IEEE80211AX */
+
 	if ((hapd->iconf->ieee80211ac && !hapd->conf->disable_11ac) ||
-	    hapd->iconf->ieee80211ax)
+	    (hapd->iconf->ieee80211ax && !hapd->conf->disable_11ax))
 		pos = hostapd_eid_wb_chsw_wrapper(hapd, pos);
 
 	pos = hostapd_eid_fils_indic(hapd, pos, 0);
 	pos = hostapd_get_rsnxe(hapd, pos, epos - pos);
 
 #ifdef CONFIG_IEEE80211AX
-	if (hapd->iconf->ieee80211ax) {
+	if (hapd->iconf->ieee80211ax && !hapd->conf->disable_11ax) {
 		pos = hostapd_eid_he_capab(hapd, pos, IEEE80211_MODE_AP);
 		pos = hostapd_eid_he_operation(hapd, pos);
 		pos = hostapd_eid_spatial_reuse(hapd, pos);
@@ -818,6 +824,10 @@
 	size_t csa_offs_len;
 	struct radius_sta rad_info;
 
+	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
+	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
+		return;
+
 	if (len < IEEE80211_HDRLEN)
 		return;
 	ie = ((const u8 *) mgmt) + IEEE80211_HDRLEN;
@@ -1114,6 +1124,23 @@
 #endif /* NEED_AP_MLME */
 
 
+#ifdef CONFIG_IEEE80211AX
+/* Unsolicited broadcast Probe Response transmission, 6 GHz only */
+static u8 * hostapd_unsol_bcast_probe_resp(struct hostapd_data *hapd,
+					   struct wpa_driver_ap_params *params)
+{
+	if (!is_6ghz_op_class(hapd->iconf->op_class))
+		return NULL;
+
+	params->unsol_bcast_probe_resp_interval =
+		hapd->conf->unsol_bcast_probe_resp_interval;
+
+	return hostapd_gen_probe_resp(hapd, NULL, 0,
+				      &params->unsol_bcast_probe_resp_tmpl_len);
+}
+#endif /* CONFIG_IEEE80211AX */
+
+
 void sta_track_del(struct hostapd_sta_info *info)
 {
 #ifdef CONFIG_TAXONOMY
@@ -1124,6 +1151,243 @@
 }
 
 
+#ifdef CONFIG_FILS
+
+static u16 hostapd_fils_discovery_cap(struct hostapd_data *hapd)
+{
+	u16 cap_info, phy_index = 0;
+	u8 chwidth = FD_CAP_BSS_CHWIDTH_20, mcs_nss_size = 4;
+	struct hostapd_hw_modes *mode = hapd->iface->current_mode;
+
+	cap_info = FD_CAP_ESS;
+	if (hapd->conf->wpa)
+		cap_info |= FD_CAP_PRIVACY;
+
+	if (is_6ghz_op_class(hapd->iconf->op_class)) {
+		phy_index = FD_CAP_PHY_INDEX_HE;
+
+		switch (hapd->iconf->op_class) {
+		case 135:
+			mcs_nss_size += 4;
+			/* fallthrough */
+		case 134:
+			mcs_nss_size += 4;
+			chwidth = FD_CAP_BSS_CHWIDTH_160_80_80;
+			break;
+		case 133:
+			chwidth = FD_CAP_BSS_CHWIDTH_80;
+			break;
+		case 132:
+			chwidth = FD_CAP_BSS_CHWIDTH_40;
+			break;
+		}
+	} else {
+		switch (hostapd_get_oper_chwidth(hapd->iconf)) {
+		case CHANWIDTH_80P80MHZ:
+			mcs_nss_size += 4;
+			/* fallthrough */
+		case CHANWIDTH_160MHZ:
+			mcs_nss_size += 4;
+			chwidth = FD_CAP_BSS_CHWIDTH_160_80_80;
+			break;
+		case CHANWIDTH_80MHZ:
+			chwidth = FD_CAP_BSS_CHWIDTH_80;
+			break;
+		case CHANWIDTH_USE_HT:
+			if (hapd->iconf->secondary_channel)
+				chwidth = FD_CAP_BSS_CHWIDTH_40;
+			else
+				chwidth = FD_CAP_BSS_CHWIDTH_20;
+			break;
+		}
+
+#ifdef CONFIG_IEEE80211AX
+		if (hapd->iconf->ieee80211ax && !hapd->conf->disable_11ax)
+			phy_index = FD_CAP_PHY_INDEX_HE;
+#endif /* CONFIG_IEEE80211AX */
+#ifdef CONFIG_IEEE80211AC
+		if (!phy_index &&
+		    hapd->iconf->ieee80211ac && !hapd->conf->disable_11ac)
+			phy_index = FD_CAP_PHY_INDEX_VHT;
+#endif /* CONFIG_IEEE80211AC */
+		if (!phy_index &&
+		    hapd->iconf->ieee80211n && !hapd->conf->disable_11n)
+			phy_index = FD_CAP_PHY_INDEX_HT;
+	}
+
+	cap_info |= phy_index << FD_CAP_PHY_INDEX_SHIFT;
+	cap_info |= chwidth << FD_CAP_BSS_CHWIDTH_SHIFT;
+
+	if (mode) {
+		u16 *mcs = (u16 *) mode->he_capab[IEEE80211_MODE_AP].mcs;
+		int i;
+		u16 nss = 0;
+
+		for (i = 0; i < HE_NSS_MAX_STREAMS; i++) {
+			u16 nss_mask = 0x3 << (i * 2);
+
+			if (mcs_nss_size == 4 &&
+			    (((mcs[0] & nss_mask) == nss_mask) ||
+			     ((mcs[1] & nss_mask) == nss_mask)))
+				continue;
+
+			if (mcs_nss_size == 8 &&
+			    (((mcs[2] & nss_mask) == nss_mask) ||
+			     ((mcs[3] & nss_mask) == nss_mask)))
+				continue;
+
+			if (mcs_nss_size == 12 &&
+			    (((mcs[4] & nss_mask) == nss_mask) ||
+			     ((mcs[5] & nss_mask) == nss_mask)))
+				continue;
+
+			nss++;
+		}
+
+		if (nss > 4)
+			cap_info |= FD_CAP_NSS_5_8 << FD_CAP_NSS_SHIFT;
+		else if (nss)
+			cap_info |= (nss - 1) << FD_CAP_NSS_SHIFT;
+	}
+
+	return cap_info;
+}
+
+
+static u8 * hostapd_gen_fils_discovery(struct hostapd_data *hapd, size_t *len)
+{
+	struct ieee80211_mgmt *head;
+	const u8 *mobility_domain;
+	u8 *pos, *length_pos, buf[200];
+	u16 ctl = 0;
+	u8 fd_rsn_info[5];
+	size_t total_len, buf_len;
+
+	total_len = 24 + 2 + 12;
+
+	/* FILS Discovery Frame Control */
+	ctl = (sizeof(hapd->conf->ssid.short_ssid) - 1) |
+		FD_FRAME_CTL_SHORT_SSID_PRESENT |
+		FD_FRAME_CTL_LENGTH_PRESENT |
+		FD_FRAME_CTL_CAP_PRESENT;
+	total_len += 4 + 1 + 2;
+
+	/* Check for optional subfields and calculate length */
+	if (wpa_auth_write_fd_rsn_info(hapd->wpa_auth, fd_rsn_info)) {
+		ctl |= FD_FRAME_CTL_RSN_INFO_PRESENT;
+		total_len += sizeof(fd_rsn_info);
+	}
+
+	mobility_domain = hostapd_wpa_ie(hapd, WLAN_EID_MOBILITY_DOMAIN);
+	if (mobility_domain) {
+		ctl |= FD_FRAME_CTL_MD_PRESENT;
+		total_len += 3;
+	}
+
+	pos = hostapd_eid_fils_indic(hapd, buf, 0);
+	buf_len = pos - buf;
+	total_len += buf_len;
+
+	head = os_zalloc(total_len);
+	if (!head)
+		return NULL;
+
+	head->frame_control = IEEE80211_FC(WLAN_FC_TYPE_MGMT,
+					   WLAN_FC_STYPE_ACTION);
+	os_memset(head->da, 0xff, ETH_ALEN);
+	os_memcpy(head->sa, hapd->own_addr, ETH_ALEN);
+	os_memcpy(head->bssid, hapd->own_addr, ETH_ALEN);
+
+	head->u.action.category = WLAN_ACTION_PUBLIC;
+	head->u.action.u.public_action.action = WLAN_PA_FILS_DISCOVERY;
+
+	pos = &head->u.action.u.public_action.variable[0];
+
+	/* FILS Discovery Information field */
+
+	/* FILS Discovery Frame Control */
+	WPA_PUT_LE16(pos, ctl);
+	pos += 2;
+
+	/* Hardware or low-level driver will fill in the Timestamp value */
+	pos += 8;
+
+	/* Beacon Interval */
+	WPA_PUT_LE16(pos, hapd->iconf->beacon_int);
+	pos += 2;
+
+	/* Short SSID */
+	WPA_PUT_LE32(pos, hapd->conf->ssid.short_ssid);
+	pos += sizeof(hapd->conf->ssid.short_ssid);
+
+	/* Store position of FILS discovery information element Length field */
+	length_pos = pos++;
+
+	/* FD Capability */
+	WPA_PUT_LE16(pos, hostapd_fils_discovery_cap(hapd));
+	pos += 2;
+
+	/* Operating Class - not present */
+
+	/* Primary Channel - not present */
+
+	/* AP Configuration Sequence Number - not present */
+
+	/* Access Network Options - not present */
+
+	/* FD RSN Information */
+	if (ctl & FD_FRAME_CTL_RSN_INFO_PRESENT) {
+		os_memcpy(pos, fd_rsn_info, sizeof(fd_rsn_info));
+		pos += sizeof(fd_rsn_info);
+	}
+
+	/* Channel Center Frequency Segment 1 - not present */
+
+	/* Mobility Domain */
+	if (ctl & FD_FRAME_CTL_MD_PRESENT) {
+		os_memcpy(pos, &mobility_domain[2], 3);
+		pos += 3;
+	}
+
+	/* Fill in the Length field value */
+	*length_pos = pos - (length_pos + 1);
+
+	/* FILS Indication element */
+	if (buf_len) {
+		os_memcpy(pos, buf, buf_len);
+		pos += buf_len;
+	}
+
+	*len = pos - (u8 *) head;
+	wpa_hexdump(MSG_DEBUG, "FILS Discovery frame template",
+		    head, pos - (u8 *) head);
+	return (u8 *) head;
+}
+
+
+/* Configure FILS Discovery frame transmission parameters */
+static u8 * hostapd_fils_discovery(struct hostapd_data *hapd,
+				   struct wpa_driver_ap_params *params)
+{
+	params->fd_max_int = hapd->conf->fils_discovery_max_int;
+	if (is_6ghz_op_class(hapd->iconf->op_class) &&
+	    params->fd_max_int > FD_MAX_INTERVAL_6GHZ)
+		params->fd_max_int = FD_MAX_INTERVAL_6GHZ;
+
+	params->fd_min_int = hapd->conf->fils_discovery_min_int;
+	if (params->fd_min_int > params->fd_max_int)
+		params->fd_min_int = params->fd_max_int;
+
+	if (params->fd_max_int)
+		return hostapd_gen_fils_discovery(hapd,
+						  &params->fd_frame_tmpl_len);
+
+	return NULL;
+}
+
+#endif /* CONFIG_FILS */
+
+
 int ieee802_11_build_ap_params(struct hostapd_data *hapd,
 			       struct wpa_driver_ap_params *params)
 {
@@ -1163,7 +1427,7 @@
 #endif /* CONFIG_IEEE80211AC */
 
 #ifdef CONFIG_IEEE80211AX
-	if (hapd->iconf->ieee80211ax) {
+	if (hapd->iconf->ieee80211ax && !hapd->conf->disable_11ax) {
 		tail_len += 3 + sizeof(struct ieee80211_he_capabilities) +
 			3 + sizeof(struct ieee80211_he_operation) +
 			3 + sizeof(struct ieee80211_he_mu_edca_parameter_set) +
@@ -1280,22 +1544,29 @@
 #endif /* CONFIG_FST */
 
 #ifdef CONFIG_IEEE80211AC
-	if (hapd->iconf->ieee80211ac && !hapd->conf->disable_11ac) {
+	if (hapd->iconf->ieee80211ac && !hapd->conf->disable_11ac &&
+	    !is_6ghz_op_class(hapd->iconf->op_class)) {
 		tailpos = hostapd_eid_vht_capabilities(hapd, tailpos, 0);
 		tailpos = hostapd_eid_vht_operation(hapd, tailpos);
 		tailpos = hostapd_eid_txpower_envelope(hapd, tailpos);
 	}
 #endif /* CONFIG_IEEE80211AC */
 
+#ifdef CONFIG_IEEE80211AX
+	if (hapd->iconf->ieee80211ax && !hapd->conf->disable_11ax &&
+	    is_6ghz_op_class(hapd->iconf->op_class))
+		tailpos = hostapd_eid_txpower_envelope(hapd, tailpos);
+#endif /* CONFIG_IEEE80211AX */
+
 	if ((hapd->iconf->ieee80211ac && !hapd->conf->disable_11ac) ||
-	     hapd->iconf->ieee80211ax)
+	    (hapd->iconf->ieee80211ax && !hapd->conf->disable_11ax))
 		tailpos = hostapd_eid_wb_chsw_wrapper(hapd, tailpos);
 
 	tailpos = hostapd_eid_fils_indic(hapd, tailpos, 0);
 	tailpos = hostapd_get_rsnxe(hapd, tailpos, tailend - tailpos);
 
 #ifdef CONFIG_IEEE80211AX
-	if (hapd->iconf->ieee80211ax) {
+	if (hapd->iconf->ieee80211ax && !hapd->conf->disable_11ax) {
 		tailpos = hostapd_eid_he_capab(hapd, tailpos,
 					       IEEE80211_MODE_AP);
 		tailpos = hostapd_eid_he_operation(hapd, tailpos);
@@ -1461,6 +1732,14 @@
 	params->head = NULL;
 	os_free(params->proberesp);
 	params->proberesp = NULL;
+#ifdef CONFIG_FILS
+	os_free(params->fd_frame_tmpl);
+	params->fd_frame_tmpl = NULL;
+#endif /* CONFIG_FILS */
+#ifdef CONFIG_IEEE80211AX
+	os_free(params->unsol_bcast_probe_resp_tmpl);
+	params->unsol_bcast_probe_resp_tmpl = NULL;
+#endif /* CONFIG_IEEE80211AX */
 }
 
 
@@ -1493,11 +1772,17 @@
 	params.assocresp_ies = assocresp;
 	params.reenable = hapd->reenable_beacon;
 #ifdef CONFIG_IEEE80211AX
-	params.he_spr = !!hapd->iface->conf->spr.sr_control;
+	params.he_spr_ctrl = hapd->iface->conf->spr.sr_control;
+	params.he_spr_non_srg_obss_pd_max_offset =
+		hapd->iface->conf->spr.non_srg_obss_pd_max_offset;
 	params.he_spr_srg_obss_pd_min_offset =
 		hapd->iface->conf->spr.srg_obss_pd_min_offset;
 	params.he_spr_srg_obss_pd_max_offset =
 		hapd->iface->conf->spr.srg_obss_pd_max_offset;
+	os_memcpy(params.he_spr_bss_color_bitmap,
+		  hapd->iface->conf->spr.srg_bss_color_bitmap, 8);
+	os_memcpy(params.he_spr_partial_bssid_bitmap,
+		  hapd->iface->conf->spr.srg_partial_bssid_bitmap, 8);
 	params.he_bss_color_disabled =
 		hapd->iface->conf->he_op.he_bss_color_disabled;
 	params.he_bss_color_partial =
@@ -1505,8 +1790,17 @@
 	params.he_bss_color = hapd->iface->conf->he_op.he_bss_color;
 	params.twt_responder = hostapd_get_he_twt_responder(hapd,
 							    IEEE80211_MODE_AP);
+	params.unsol_bcast_probe_resp_tmpl =
+		hostapd_unsol_bcast_probe_resp(hapd, &params);
 #endif /* CONFIG_IEEE80211AX */
 	hapd->reenable_beacon = 0;
+#ifdef CONFIG_SAE
+	params.sae_pwe = hapd->conf->sae_pwe;
+#endif /* CONFIG_SAE */
+
+#ifdef CONFIG_FILS
+	params.fd_frame_tmpl = hostapd_fils_discovery(hapd, &params);
+#endif /* CONFIG_FILS */
 
 	if (cmode &&
 	    hostapd_set_freq_params(&freq, iconf->hw_mode, iface->freq,
diff --git a/src/ap/beacon.h b/src/ap/beacon.h
index a26e308..c320825 100644
--- a/src/ap/beacon.h
+++ b/src/ap/beacon.h
@@ -30,4 +30,6 @@
 void sta_track_claim_taxonomy_info(struct hostapd_iface *iface, const u8 *addr,
 				   struct wpabuf **probe_ie_taxonomy);
 
+const u8 * hostapd_wpa_ie(struct hostapd_data *hapd, u8 eid);
+
 #endif /* BEACON_H */
diff --git a/src/ap/ctrl_iface_ap.c b/src/ap/ctrl_iface_ap.c
index ef53a82..28e40ba 100644
--- a/src/ap/ctrl_iface_ap.c
+++ b/src/ap/ctrl_iface_ap.c
@@ -748,7 +748,8 @@
 			  iface->conf->ieee80211n && !hapd->conf->disable_11n,
 			  iface->conf->ieee80211ac &&
 			  !hapd->conf->disable_11ac,
-			  iface->conf->ieee80211ax,
+			  iface->conf->ieee80211ax &&
+			  !hapd->conf->disable_11ax,
 			  iface->conf->beacon_int,
 			  hapd->conf->dtim_period);
 	if (os_snprintf_error(buflen - len, ret))
@@ -756,7 +757,7 @@
 	len += ret;
 
 #ifdef CONFIG_IEEE80211AX
-	if (iface->conf->ieee80211ax) {
+	if (iface->conf->ieee80211ax && !hapd->conf->disable_11ax) {
 		ret = os_snprintf(buf + len, buflen - len,
 				  "he_oper_chwidth=%d\n"
 				  "he_oper_centr_freq_seg0_idx=%d\n"
@@ -908,6 +909,7 @@
 	SET_CSA_SETTING(sec_channel_offset);
 	settings->freq_params.ht_enabled = !!os_strstr(pos, " ht");
 	settings->freq_params.vht_enabled = !!os_strstr(pos, " vht");
+	settings->freq_params.he_enabled = !!os_strstr(pos, " he");
 	settings->block_tx = !!os_strstr(pos, " blocktx");
 #undef SET_CSA_SETTING
 
diff --git a/src/ap/dfs.c b/src/ap/dfs.c
index f04a00a..b990fb3 100644
--- a/src/ap/dfs.c
+++ b/src/ap/dfs.c
@@ -81,17 +81,17 @@
 	 * We will also choose this first channel as the control one.
 	 */
 	int allowed_40[] = { 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157,
-			     184, 192 };
+			     165, 173, 184, 192 };
 	/*
 	 * VHT80, valid channels based on center frequency:
-	 * 42, 58, 106, 122, 138, 155
+	 * 42, 58, 106, 122, 138, 155, 171
 	 */
-	int allowed_80[] = { 36, 52, 100, 116, 132, 149 };
+	int allowed_80[] = { 36, 52, 100, 116, 132, 149, 165 };
 	/*
 	 * VHT160 valid channels based on center frequency:
-	 * 50, 114
+	 * 50, 114, 163
 	 */
-	int allowed_160[] = { 36, 100 };
+	int allowed_160[] = { 36, 100, 149 };
 	int *allowed = allowed_40;
 	unsigned int i, allowed_no = 0;
 
@@ -1032,6 +1032,7 @@
 	int err = 1;
 	struct hostapd_hw_modes *cmode = iface->current_mode;
 	u8 current_vht_oper_chwidth = hostapd_get_oper_chwidth(iface->conf);
+	int ieee80211_mode = IEEE80211_MODE_AP;
 
 	wpa_printf(MSG_DEBUG, "%s called (CAC active: %s, CSA active: %s)",
 		   __func__, iface->cac_started ? "yes" : "no",
@@ -1069,8 +1070,16 @@
 						  &oper_centr_freq_seg0_idx,
 						  &oper_centr_freq_seg1_idx,
 						  &skip_radar);
-		if (!channel)
-			return err;
+		if (!channel) {
+			/*
+			 * Toggle interface state to enter DFS state
+			 * until NOP is finished.
+			 */
+			hostapd_disable_iface(iface);
+			hostapd_enable_iface(iface);
+			return 0;
+		}
+
 		if (!skip_radar) {
 			iface->freq = channel->freq;
 			iface->conf->channel = channel->chan;
@@ -1099,6 +1108,10 @@
 	os_memset(&csa_settings, 0, sizeof(csa_settings));
 	csa_settings.cs_count = 5;
 	csa_settings.block_tx = 1;
+#ifdef CONFIG_MESH
+	if (iface->mconf)
+		ieee80211_mode = IEEE80211_MODE_MESH;
+#endif /* CONFIG_MESH */
 	err = hostapd_set_freq_params(&csa_settings.freq_params,
 				      iface->conf->hw_mode,
 				      channel->freq,
@@ -1113,7 +1126,7 @@
 				      oper_centr_freq_seg0_idx,
 				      oper_centr_freq_seg1_idx,
 				      cmode->vht_capab,
-				      &cmode->he_capab[IEEE80211_MODE_AP]);
+				      &cmode->he_capab[ieee80211_mode]);
 
 	if (err) {
 		wpa_printf(MSG_ERROR, "DFS failed to calculate CSA freq params");
@@ -1335,12 +1348,16 @@
 		if (!(chan->flag & HOSTAPD_CHAN_RADAR))
 			continue;
 
+		if ((chan->flag & HOSTAPD_CHAN_DFS_MASK) ==
+		    HOSTAPD_CHAN_DFS_AVAILABLE)
+			continue;
+
 		if (center_freq - chan->freq < half_width &&
 		    chan->freq - center_freq < half_width)
 			res++;
 	}
 
-	wpa_printf(MSG_DEBUG, "DFS: (%d, %d): in range: %s",
+	wpa_printf(MSG_DEBUG, "DFS CAC required: (%d, %d): in range: %s",
 		   center_freq - half_width, center_freq + half_width,
 		   res ? "yes" : "no");
 
diff --git a/src/ap/dpp_hostapd.c b/src/ap/dpp_hostapd.c
index 6772a87..e1e5a3a 100644
--- a/src/ap/dpp_hostapd.c
+++ b/src/ap/dpp_hostapd.c
@@ -23,6 +23,8 @@
 
 
 static void hostapd_dpp_reply_wait_timeout(void *eloop_ctx, void *timeout_ctx);
+static void hostapd_dpp_auth_conf_wait_timeout(void *eloop_ctx,
+					       void *timeout_ctx);
 static void hostapd_dpp_auth_success(struct hostapd_data *hapd, int initiator);
 static void hostapd_dpp_init_timeout(void *eloop_ctx, void *timeout_ctx);
 static int hostapd_dpp_auth_init_next(struct hostapd_data *hapd);
@@ -246,6 +248,8 @@
 		eloop_cancel_timeout(hostapd_dpp_init_timeout, hapd, NULL);
 		eloop_cancel_timeout(hostapd_dpp_reply_wait_timeout,
 				     hapd, NULL);
+		eloop_cancel_timeout(hostapd_dpp_auth_conf_wait_timeout,
+				     hapd, NULL);
 		eloop_cancel_timeout(hostapd_dpp_auth_resp_retry_timeout, hapd,
 				     NULL);
 #ifdef CONFIG_DPP2
@@ -277,6 +281,17 @@
 		}
 	}
 
+	if (auth->waiting_auth_conf &&
+	    auth->auth_resp_status == DPP_STATUS_OK) {
+		/* Make sure we do not get stuck waiting for Auth Confirm
+		 * indefinitely after successfully transmitted Auth Response to
+		 * allow new authentication exchanges to be started. */
+		eloop_cancel_timeout(hostapd_dpp_auth_conf_wait_timeout, hapd,
+				     NULL);
+		eloop_register_timeout(1, 0, hostapd_dpp_auth_conf_wait_timeout,
+				       hapd, NULL);
+	}
+
 	if (!is_broadcast_ether_addr(dst) && auth->waiting_auth_resp && ok) {
 		/* Allow timeout handling to stop iteration if no response is
 		 * received from a peer that has ACKed a request. */
@@ -377,6 +392,25 @@
 }
 
 
+static void hostapd_dpp_auth_conf_wait_timeout(void *eloop_ctx,
+					       void *timeout_ctx)
+{
+	struct hostapd_data *hapd = eloop_ctx;
+	struct dpp_authentication *auth = hapd->dpp_auth;
+
+	if (!auth || !auth->waiting_auth_conf)
+		return;
+
+	wpa_printf(MSG_DEBUG,
+		   "DPP: Terminate authentication exchange due to Auth Confirm timeout");
+	wpa_msg(hapd->msg_ctx, MSG_INFO, DPP_EVENT_FAIL
+		"No Auth Confirm received");
+	hostapd_drv_send_action_cancel_wait(hapd);
+	dpp_auth_deinit(auth);
+	hapd->dpp_auth = NULL;
+}
+
+
 static void hostapd_dpp_set_testing_options(struct hostapd_data *hapd,
 					    struct dpp_authentication *auth)
 {
@@ -461,7 +495,9 @@
 	freq = auth->freq[auth->freq_idx++];
 	auth->curr_freq = freq;
 
-	if (is_zero_ether_addr(auth->peer_bi->mac_addr))
+	if (!is_zero_ether_addr(auth->peer_mac_addr))
+		dst = auth->peer_mac_addr;
+	else if (is_zero_ether_addr(auth->peer_bi->mac_addr))
 		dst = broadcast;
 	else
 		dst = auth->peer_bi->mac_addr;
@@ -594,6 +630,8 @@
 		eloop_cancel_timeout(hostapd_dpp_init_timeout, hapd, NULL);
 		eloop_cancel_timeout(hostapd_dpp_reply_wait_timeout,
 				     hapd, NULL);
+		eloop_cancel_timeout(hostapd_dpp_auth_conf_wait_timeout,
+				     hapd, NULL);
 		eloop_cancel_timeout(hostapd_dpp_auth_resp_retry_timeout, hapd,
 				     NULL);
 #ifdef CONFIG_DPP2
@@ -661,12 +699,14 @@
 		return -1;
 	}
 
+	hostapd_drv_dpp_listen(hapd, true);
 	return 0;
 }
 
 
 void hostapd_dpp_listen_stop(struct hostapd_data *hapd)
 {
+	hostapd_drv_dpp_listen(hapd, false);
 	/* TODO: Stop listen operation on non-operating channel */
 }
 
@@ -1261,8 +1301,9 @@
 
 	auth->neg_freq = freq;
 
-	if (!is_zero_ether_addr(peer_bi->mac_addr))
-		os_memcpy(auth->peer_mac_addr, peer_bi->mac_addr, ETH_ALEN);
+	/* The source address of the Presence Announcement frame overrides any
+	 * MAC address information from the bootstrapping information. */
+	os_memcpy(auth->peer_mac_addr, src, ETH_ALEN);
 
 	hapd->dpp_auth = auth;
 	if (hostapd_dpp_auth_init_next(hapd) < 0) {
@@ -1962,6 +2003,7 @@
 	wpa_printf(MSG_DEBUG, "DPP: Configuration exchange completed (ok=%d)",
 		   ok);
 	eloop_cancel_timeout(hostapd_dpp_reply_wait_timeout, hapd, NULL);
+	eloop_cancel_timeout(hostapd_dpp_auth_conf_wait_timeout, hapd, NULL);
 	eloop_cancel_timeout(hostapd_dpp_auth_resp_retry_timeout, hapd, NULL);
 #ifdef CONFIG_DPP2
 		eloop_cancel_timeout(hostapd_dpp_reconfig_reply_wait_timeout,
@@ -2207,6 +2249,7 @@
 	if (!hapd->dpp_init_done)
 		return;
 	eloop_cancel_timeout(hostapd_dpp_reply_wait_timeout, hapd, NULL);
+	eloop_cancel_timeout(hostapd_dpp_auth_conf_wait_timeout, hapd, NULL);
 	eloop_cancel_timeout(hostapd_dpp_init_timeout, hapd, NULL);
 	eloop_cancel_timeout(hostapd_dpp_auth_resp_retry_timeout, hapd, NULL);
 #ifdef CONFIG_DPP2
diff --git a/src/ap/drv_callbacks.c b/src/ap/drv_callbacks.c
index 9af5445..53082f5 100644
--- a/src/ap/drv_callbacks.c
+++ b/src/ap/drv_callbacks.c
@@ -870,9 +870,10 @@
 
 	hostapd_logger(hapd, NULL, HOSTAPD_MODULE_IEEE80211,
 		       HOSTAPD_LEVEL_INFO,
-		       "driver %s channel switch: freq=%d, ht=%d, vht_ch=0x%x, offset=%d, width=%d (%s), cf1=%d, cf2=%d",
+		       "driver %s channel switch: freq=%d, ht=%d, vht_ch=0x%x, he_ch=0x%x, offset=%d, width=%d (%s), cf1=%d, cf2=%d",
 		       finished ? "had" : "starting",
-		       freq, ht, hapd->iconf->ch_switch_vht_config, offset,
+		       freq, ht, hapd->iconf->ch_switch_vht_config,
+		       hapd->iconf->ch_switch_he_config, offset,
 		       width, channel_width_to_string(width), cf1, cf2);
 
 	if (!hapd->iface->current_mode) {
@@ -944,8 +945,17 @@
 		else if (hapd->iconf->ch_switch_vht_config &
 			 CH_SWITCH_VHT_DISABLED)
 			hapd->iconf->ieee80211ac = 0;
+	} else if (hapd->iconf->ch_switch_he_config) {
+		/* CHAN_SWITCH HE config */
+		if (hapd->iconf->ch_switch_he_config &
+		    CH_SWITCH_HE_ENABLED)
+			hapd->iconf->ieee80211ax = 1;
+		else if (hapd->iconf->ch_switch_he_config &
+			 CH_SWITCH_HE_DISABLED)
+			hapd->iconf->ieee80211ax = 0;
 	}
 	hapd->iconf->ch_switch_vht_config = 0;
+	hapd->iconf->ch_switch_he_config = 0;
 
 	hapd->iconf->secondary_channel = offset;
 	hostapd_set_oper_chwidth(hapd->iconf, chwidth);
diff --git a/src/ap/hostapd.c b/src/ap/hostapd.c
index b37f49f..e257174 100644
--- a/src/ap/hostapd.c
+++ b/src/ap/hostapd.c
@@ -354,7 +354,7 @@
 #endif /* CONFIG_WEP */
 
 
-static void hostapd_free_hapd_data(struct hostapd_data *hapd)
+void hostapd_free_hapd_data(struct hostapd_data *hapd)
 {
 	os_free(hapd->probereq_cb);
 	hapd->probereq_cb = NULL;
@@ -434,6 +434,8 @@
 #ifdef CONFIG_MESH
 	wpabuf_free(hapd->mesh_pending_auth);
 	hapd->mesh_pending_auth = NULL;
+	/* handling setup failure is already done */
+	hapd->setup_complete_cb = NULL;
 #endif /* CONFIG_MESH */
 
 	hostapd_clean_rrm(hapd);
@@ -496,7 +498,7 @@
 }
 
 
-static void hostapd_cleanup_iface_partial(struct hostapd_iface *iface)
+void hostapd_cleanup_iface_partial(struct hostapd_iface *iface)
 {
 	wpa_printf(MSG_DEBUG, "%s(%p)", __func__, iface);
 #ifdef NEED_AP_MLME
@@ -624,7 +626,7 @@
 }
 
 
-static void hostapd_bss_deinit_no_free(struct hostapd_data *hapd)
+void hostapd_bss_deinit_no_free(struct hostapd_data *hapd)
 {
 	hostapd_free_stas(hapd);
 	hostapd_flush_old_stations(hapd, WLAN_REASON_DEAUTH_LEAVING);
@@ -1701,6 +1703,9 @@
 		ret = hostapd_check_edmg_capab(iface);
 		if (ret < 0)
 			goto fail;
+		ret = hostapd_check_he_6ghz_capab(iface);
+		if (ret < 0)
+			goto fail;
 		ret = hostapd_check_ht_capab(iface);
 		if (ret < 0)
 			goto fail;
@@ -2156,6 +2161,13 @@
 	if (hapd->setup_complete_cb)
 		hapd->setup_complete_cb(hapd->setup_complete_cb_ctx);
 
+#ifdef CONFIG_MESH
+	if (delay_apply_cfg && !iface->mconf) {
+		wpa_printf(MSG_ERROR, "Error while completing mesh init");
+		goto fail;
+	}
+#endif /* CONFIG_MESH */
+
 	wpa_printf(MSG_DEBUG, "%s: Setup of interface done.",
 		   iface->bss[0]->conf->iface);
 	if (iface->interfaces && iface->interfaces->terminate_on_error > 0)
@@ -2299,7 +2311,7 @@
 	ret = setup_interface(iface);
 	if (ret) {
 		wpa_printf(MSG_ERROR, "%s: Unable to setup interface.",
-			   iface->bss[0]->conf->iface);
+			   iface->conf ? iface->conf->bss[0]->iface : "N/A");
 		return -1;
 	}
 
@@ -2681,6 +2693,12 @@
 {
 	size_t j;
 
+	if (!hapd_iface)
+		return -1;
+
+	if (hapd_iface->enable_iface_cb)
+		return hapd_iface->enable_iface_cb(hapd_iface);
+
 	if (hapd_iface->bss[0]->drv_priv != NULL) {
 		wpa_printf(MSG_ERROR, "Interface %s already enabled",
 			   hapd_iface->conf->bss[0]->iface);
@@ -2742,6 +2760,9 @@
 	if (hapd_iface == NULL)
 		return -1;
 
+	if (hapd_iface->disable_iface_cb)
+		return hapd_iface->disable_iface_cb(hapd_iface);
+
 	if (hapd_iface->bss[0]->drv_priv == NULL) {
 		wpa_printf(MSG_INFO, "Interface %s already disabled",
 			   hapd_iface->conf->bss[0]->iface);
@@ -3539,15 +3560,23 @@
 }
 
 
-void hostapd_chan_switch_vht_config(struct hostapd_data *hapd, int vht_enabled)
+void hostapd_chan_switch_config(struct hostapd_data *hapd,
+				struct hostapd_freq_params *freq_params)
 {
-	if (vht_enabled)
+	if (freq_params->he_enabled)
+		hapd->iconf->ch_switch_he_config |= CH_SWITCH_HE_ENABLED;
+	else
+		hapd->iconf->ch_switch_he_config |= CH_SWITCH_HE_DISABLED;
+
+	if (freq_params->vht_enabled)
 		hapd->iconf->ch_switch_vht_config |= CH_SWITCH_VHT_ENABLED;
 	else
 		hapd->iconf->ch_switch_vht_config |= CH_SWITCH_VHT_DISABLED;
 
 	hostapd_logger(hapd, NULL, HOSTAPD_MODULE_IEEE80211,
-		       HOSTAPD_LEVEL_INFO, "CHAN_SWITCH VHT CONFIG 0x%x",
+		       HOSTAPD_LEVEL_INFO,
+		       "CHAN_SWITCH HE config 0x%x VHT config 0x%x",
+		       hapd->iconf->ch_switch_he_config,
 		       hapd->iconf->ch_switch_vht_config);
 }
 
diff --git a/src/ap/hostapd.h b/src/ap/hostapd.h
index 9d3c85d..591996a 100644
--- a/src/ap/hostapd.h
+++ b/src/ap/hostapd.h
@@ -370,6 +370,8 @@
 
 	int dhcp_sock; /* UDP socket used with the DHCP server */
 
+	struct ptksa_cache *ptksa;
+
 #ifdef CONFIG_DPP
 	int dpp_init_done;
 	struct dpp_authentication *dpp_auth;
@@ -590,6 +592,9 @@
 
 	/* Previous WMM element information */
 	struct hostapd_wmm_ac_params prev_wmm[WMM_AC_NUM];
+
+	int (*enable_iface_cb)(struct hostapd_iface *iface);
+	int (*disable_iface_cb)(struct hostapd_iface *iface);
 };
 
 /* hostapd.c */
@@ -618,13 +623,17 @@
 int hostapd_enable_iface(struct hostapd_iface *hapd_iface);
 int hostapd_reload_iface(struct hostapd_iface *hapd_iface);
 int hostapd_disable_iface(struct hostapd_iface *hapd_iface);
+void hostapd_bss_deinit_no_free(struct hostapd_data *hapd);
+void hostapd_free_hapd_data(struct hostapd_data *hapd);
+void hostapd_cleanup_iface_partial(struct hostapd_iface *iface);
 int hostapd_add_iface(struct hapd_interfaces *ifaces, char *buf);
 int hostapd_remove_iface(struct hapd_interfaces *ifaces, char *buf);
 void hostapd_channel_list_updated(struct hostapd_iface *iface, int initiator);
 void hostapd_set_state(struct hostapd_iface *iface, enum hostapd_iface_state s);
 const char * hostapd_state_text(enum hostapd_iface_state s);
 int hostapd_csa_in_progress(struct hostapd_iface *iface);
-void hostapd_chan_switch_vht_config(struct hostapd_data *hapd, int vht_enabled);
+void hostapd_chan_switch_config(struct hostapd_data *hapd,
+				struct hostapd_freq_params *freq_params);
 int hostapd_switch_channel(struct hostapd_data *hapd,
 			   struct csa_settings *settings);
 void
diff --git a/src/ap/hs20.c b/src/ap/hs20.c
index 543fa33..05e9b9d 100644
--- a/src/ap/hs20.c
+++ b/src/ap/hs20.c
@@ -86,7 +86,9 @@
 			capab |= WPA_CAPABILITY_MFPR;
 	}
 #ifdef CONFIG_OCV
-	if (hapd->conf->ocv)
+	if (hapd->conf->ocv &&
+	    (hapd->iface->drv_flags2 &
+	     (WPA_DRIVER_FLAGS2_AP_SME | WPA_DRIVER_FLAGS2_OCV)))
 		capab |= WPA_CAPABILITY_OCVC;
 #endif /* CONFIG_OCV */
 	WPA_PUT_LE16(eid, capab);
diff --git a/src/ap/hw_features.c b/src/ap/hw_features.c
index f6e6903..7849be1 100644
--- a/src/ap/hw_features.c
+++ b/src/ap/hw_features.c
@@ -313,7 +313,7 @@
 {
 	struct wpa_scan_results *scan_res;
 	int oper40;
-	int res;
+	int res = 0;
 
 	/* Check list of neighboring BSSes (from scan) to see whether 40 MHz is
 	 * allowed per IEEE Std 802.11-2012, 10.15.3.2 */
@@ -349,7 +349,24 @@
 		}
 	}
 
-	res = ieee80211n_allowed_ht40_channel_pair(iface);
+#ifdef CONFIG_IEEE80211AX
+	if (iface->conf->secondary_channel &&
+	    iface->current_mode->mode == HOSTAPD_MODE_IEEE80211G &&
+	    iface->conf->ieee80211ax) {
+		struct he_capabilities *he_cap;
+
+		he_cap = &iface->current_mode->he_capab[IEEE80211_MODE_AP];
+		if (!(he_cap->phy_cap[HE_PHYCAP_CHANNEL_WIDTH_SET_IDX] &
+		      HE_PHYCAP_CHANNEL_WIDTH_SET_40MHZ_IN_2G)) {
+			wpa_printf(MSG_DEBUG,
+				   "HE: 40 MHz channel width is not supported in 2.4 GHz; clear secondary channel configuration");
+			iface->conf->secondary_channel = 0;
+		}
+	}
+#endif /* CONFIG_IEEE80211AX */
+
+	if (iface->conf->secondary_channel)
+		res = ieee80211n_allowed_ht40_channel_pair(iface);
 	if (!res) {
 		iface->conf->secondary_channel = 0;
 		hostapd_set_oper_centr_freq_seg0_idx(iface->conf, 0);
@@ -732,6 +749,51 @@
 }
 
 
+int hostapd_check_he_6ghz_capab(struct hostapd_iface *iface)
+{
+#ifdef CONFIG_IEEE80211AX
+	struct he_capabilities *he_cap;
+	u16 hw;
+
+	if (!iface->current_mode || !is_6ghz_freq(iface->freq))
+		return 0;
+
+	he_cap = &iface->current_mode->he_capab[IEEE80211_MODE_AP];
+	hw = he_cap->he_6ghz_capa;
+	if (iface->conf->he_6ghz_max_mpdu >
+	    ((hw & HE_6GHZ_BAND_CAP_MAX_MPDU_LEN_MASK) >>
+	     HE_6GHZ_BAND_CAP_MAX_MPDU_LEN_SHIFT)) {
+		wpa_printf(MSG_ERROR,
+			   "The driver does not support the configured HE 6 GHz Max MPDU length");
+		return -1;
+	}
+
+	if (iface->conf->he_6ghz_max_ampdu_len_exp >
+	    ((hw & HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_MASK) >>
+	     HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_SHIFT)) {
+		wpa_printf(MSG_ERROR,
+			   "The driver does not support the configured HE 6 GHz Max AMPDU Length Exponent");
+		return -1;
+	}
+
+	if (iface->conf->he_6ghz_rx_ant_pat &&
+	    !(hw & HE_6GHZ_BAND_CAP_RX_ANTPAT_CONS)) {
+		wpa_printf(MSG_ERROR,
+			   "The driver does not support the configured HE 6 GHz Rx Antenna Pattern");
+		return -1;
+	}
+
+	if (iface->conf->he_6ghz_tx_ant_pat &&
+	    !(hw & HE_6GHZ_BAND_CAP_TX_ANTPAT_CONS)) {
+		wpa_printf(MSG_ERROR,
+			   "The driver does not support the configured HE 6 GHz Tx Antenna Pattern");
+		return -1;
+	}
+#endif /* CONFIG_IEEE80211AX */
+	return 0;
+}
+
+
 static int hostapd_is_usable_chan(struct hostapd_iface *iface,
 				  int frequency, int primary)
 {
@@ -949,9 +1011,9 @@
 	hostapd_logger(iface->bss[0], NULL,
 		       HOSTAPD_MODULE_IEEE80211,
 		       HOSTAPD_LEVEL_WARNING,
-		       "Configured channel (%d) or frequency (%d) not found from the channel list of the current mode (%d) %s",
+		       "Configured channel (%d) or frequency (%d) (secondary_channel=%d) not found from the channel list of the current mode (%d) %s",
 		       iface->conf->channel,
-		       iface->freq,
+		       iface->freq, iface->conf->secondary_channel,
 		       iface->current_mode->mode,
 		       hostapd_hw_mode_txt(iface->current_mode->mode));
 	hostapd_logger(iface->bss[0], NULL, HOSTAPD_MODULE_IEEE80211,
@@ -1029,12 +1091,13 @@
 	iface->current_mode = NULL;
 	for (i = 0; i < iface->num_hw_features; i++) {
 		struct hostapd_hw_modes *mode = &iface->hw_features[i];
+		int chan;
+
 		if (mode->mode == iface->conf->hw_mode) {
 			if (iface->freq > 0 &&
-			    !hw_get_chan(mode->mode, iface->freq,
-					 iface->hw_features,
-					 iface->num_hw_features))
+			    !hw_mode_get_channel(mode, iface->freq, &chan))
 				continue;
+
 			iface->current_mode = mode;
 			break;
 		}
diff --git a/src/ap/hw_features.h b/src/ap/hw_features.h
index dd24f95..ad0ddf7 100644
--- a/src/ap/hw_features.h
+++ b/src/ap/hw_features.h
@@ -22,6 +22,7 @@
 int hostapd_hw_get_channel(struct hostapd_data *hapd, int freq);
 int hostapd_check_ht_capab(struct hostapd_iface *iface);
 int hostapd_check_edmg_capab(struct hostapd_iface *iface);
+int hostapd_check_he_6ghz_capab(struct hostapd_iface *iface);
 int hostapd_prepare_rates(struct hostapd_iface *iface,
 			  struct hostapd_hw_modes *mode);
 void hostapd_stop_setup_timers(struct hostapd_iface *iface);
@@ -85,6 +86,11 @@
 	return 0;
 }
 
+static inline int hostapd_check_he_6ghz_capab(struct hostapd_iface *iface)
+{
+	return 0;
+}
+
 #endif /* NEED_AP_MLME */
 
 #endif /* HW_FEATURES_H */
diff --git a/src/ap/ieee802_11.c b/src/ap/ieee802_11.c
index a872893..40d4a33 100644
--- a/src/ap/ieee802_11.c
+++ b/src/ap/ieee802_11.c
@@ -25,6 +25,7 @@
 #include "common/ocv.h"
 #include "common/wpa_common.h"
 #include "common/wpa_ctrl.h"
+#include "common/ptksa_cache.h"
 #include "radius/radius.h"
 #include "radius/radius_client.h"
 #include "p2p/p2p.h"
@@ -65,6 +66,23 @@
 		       const u8 *msk, size_t msk_len,
 		       int *is_pub);
 #endif /* CONFIG_FILS */
+
+#ifdef CONFIG_PASN
+
+static int handle_auth_pasn_resp(struct hostapd_data *hapd,
+				 struct sta_info *sta,
+				 struct rsn_pmksa_cache_entry *pmksa,
+				 u16 status);
+#ifdef CONFIG_FILS
+
+static void pasn_fils_auth_resp(struct hostapd_data *hapd,
+				struct sta_info *sta, u16 status,
+				struct wpabuf *erp_resp,
+				const u8 *msk, size_t msk_len);
+
+#endif /* CONFIG_FILS */
+#endif /* CONFIG_PASN */
+
 static void handle_auth(struct hostapd_data *hapd,
 			const struct ieee80211_mgmt *mgmt, size_t len,
 			int rssi, int from_queue);
@@ -469,6 +487,49 @@
 }
 
 
+static const char * sae_get_password(struct hostapd_data *hapd,
+				     struct sta_info *sta,
+				     const char *rx_id,
+				     struct sae_password_entry **pw_entry,
+				     struct sae_pt **s_pt,
+				     const struct sae_pk **s_pk)
+{
+	const char *password = NULL;
+	struct sae_password_entry *pw;
+	struct sae_pt *pt = NULL;
+	const struct sae_pk *pk = NULL;
+
+	for (pw = hapd->conf->sae_passwords; pw; pw = pw->next) {
+		if (!is_broadcast_ether_addr(pw->peer_addr) &&
+		    os_memcmp(pw->peer_addr, sta->addr, ETH_ALEN) != 0)
+			continue;
+		if ((rx_id && !pw->identifier) || (!rx_id && pw->identifier))
+			continue;
+		if (rx_id && pw->identifier &&
+		    os_strcmp(rx_id, pw->identifier) != 0)
+			continue;
+		password = pw->password;
+		pt = pw->pt;
+		if (!(hapd->conf->mesh & MESH_ENABLED))
+			pk = pw->pk;
+		break;
+	}
+	if (!password) {
+		password = hapd->conf->ssid.wpa_passphrase;
+		pt = hapd->conf->ssid.pt;
+	}
+
+	if (pw_entry)
+		*pw_entry = pw;
+	if (s_pt)
+		*s_pt = pt;
+	if (s_pk)
+		*s_pk = pk;
+
+	return password;
+}
+
+
 static struct wpabuf * auth_build_sae_commit(struct hostapd_data *hapd,
 					     struct sta_info *sta, int update,
 					     int status_code)
@@ -498,25 +559,7 @@
 		 status_code == WLAN_STATUS_SAE_PK)
 		use_pt = 1;
 
-	for (pw = hapd->conf->sae_passwords; pw; pw = pw->next) {
-		if (!is_broadcast_ether_addr(pw->peer_addr) &&
-		    os_memcmp(pw->peer_addr, sta->addr, ETH_ALEN) != 0)
-			continue;
-		if ((rx_id && !pw->identifier) || (!rx_id && pw->identifier))
-			continue;
-		if (rx_id && pw->identifier &&
-		    os_strcmp(rx_id, pw->identifier) != 0)
-			continue;
-		password = pw->password;
-		pt = pw->pt;
-		if (!(hapd->conf->mesh & MESH_ENABLED))
-			pk = pw->pk;
-		break;
-	}
-	if (!password) {
-		password = hapd->conf->ssid.wpa_passphrase;
-		pt = hapd->conf->ssid.pt;
-	}
+	password = sae_get_password(hapd, sta, rx_id, &pw, &pt, &pk);
 	if (!password || (use_pt && !pt)) {
 		wpa_printf(MSG_DEBUG, "SAE: No password available");
 		return NULL;
@@ -1149,6 +1192,7 @@
 {
 	int sae_pwe = hapd->conf->sae_pwe;
 	int id_in_use;
+	bool sae_pk = false;
 
 	id_in_use = hostapd_sae_pw_id_in_use(hapd->conf);
 	if (id_in_use == 2 && sae_pwe != 3)
@@ -1156,7 +1200,8 @@
 	else if (id_in_use == 1 && sae_pwe == 0)
 		sae_pwe = 2;
 #ifdef CONFIG_SAE_PK
-	if (sae_pwe == 0 && hostapd_sae_pk_in_use(hapd->conf))
+	sae_pk = hostapd_sae_pk_in_use(hapd->conf);
+	if (sae_pwe == 0 && sae_pk)
 		sae_pwe = 2;
 #endif /* CONFIG_SAE_PK */
 
@@ -1164,11 +1209,11 @@
 		status_code == WLAN_STATUS_SUCCESS) ||
 		(sae_pwe == 1 &&
 		 (status_code == WLAN_STATUS_SAE_HASH_TO_ELEMENT ||
-		  status_code == WLAN_STATUS_SAE_PK)) ||
+		  (sae_pk && status_code == WLAN_STATUS_SAE_PK))) ||
 		(sae_pwe == 2 &&
 		 (status_code == WLAN_STATUS_SUCCESS ||
 		  status_code == WLAN_STATUS_SAE_HASH_TO_ELEMENT ||
-		  status_code == WLAN_STATUS_SAE_PK));
+		  (sae_pk && status_code == WLAN_STATUS_SAE_PK)));
 }
 
 
@@ -1232,6 +1277,7 @@
 	int default_groups[] = { 19, 0 };
 	const u8 *pos, *end;
 	int sta_removed = 0;
+	bool success_status;
 
 	if (!groups)
 		groups = default_groups;
@@ -1517,9 +1563,12 @@
 	}
 
 remove_sta:
+	if (auth_transaction == 1)
+		success_status = sae_status_success(hapd, status_code);
+	else
+		success_status = status_code == WLAN_STATUS_SUCCESS;
 	if (!sta_removed && sta->added_unassoc &&
-	    (resp != WLAN_STATUS_SUCCESS ||
-	     status_code != WLAN_STATUS_SUCCESS)) {
+	    (resp != WLAN_STATUS_SUCCESS || !success_status)) {
 		hostapd_drv_sta_remove(hapd, sta->addr);
 		sta->added_unassoc = 0;
 	}
@@ -2183,23 +2232,35 @@
 				 struct wpabuf *erp_resp,
 				 const u8 *msk, size_t msk_len)
 {
-	struct wpabuf *data;
-	int pub = 0;
 	u16 resp;
+	u32 flags = sta->flags;
 
-	sta->flags &= ~WLAN_STA_PENDING_FILS_ERP;
+	sta->flags &= ~(WLAN_STA_PENDING_FILS_ERP |
+			WLAN_STA_PENDING_PASN_FILS_ERP);
 
-	if (!sta->fils_pending_cb)
-		return;
 	resp = success ? WLAN_STATUS_SUCCESS : WLAN_STATUS_UNSPECIFIED_FAILURE;
-	data = prepare_auth_resp_fils(hapd, sta, &resp, NULL, erp_resp,
-				      msk, msk_len, &pub);
-	if (!data) {
-		wpa_printf(MSG_DEBUG,
-			   "%s: prepare_auth_resp_fils() returned failure",
-			   __func__);
+
+	if (flags & WLAN_STA_PENDING_FILS_ERP) {
+		struct wpabuf *data;
+		int pub = 0;
+
+		if (!sta->fils_pending_cb)
+			return;
+
+		data = prepare_auth_resp_fils(hapd, sta, &resp, NULL, erp_resp,
+					      msk, msk_len, &pub);
+		if (!data) {
+			wpa_printf(MSG_DEBUG,
+				   "%s: prepare_auth_resp_fils() failure",
+				   __func__);
+		}
+		sta->fils_pending_cb(hapd, sta, resp, data, pub);
+#ifdef CONFIG_PASN
+	} else if (flags & WLAN_STA_PENDING_PASN_FILS_ERP) {
+		pasn_fils_auth_resp(hapd, sta, resp, erp_resp,
+				    msk, msk_len);
+#endif /* CONFIG_PASN */
 	}
-	sta->fils_pending_cb(hapd, sta, resp, data, pub);
 }
 
 #endif /* CONFIG_FILS */
@@ -2294,6 +2355,1065 @@
 }
 
 
+#ifdef CONFIG_PASN
+#ifdef CONFIG_SAE
+
+static int pasn_wd_handle_sae_commit(struct hostapd_data *hapd,
+				     struct sta_info *sta,
+				     struct wpabuf *wd)
+{
+	struct pasn_data *pasn = sta->pasn;
+	const char *password = NULL;
+	const u8 *data;
+	size_t buf_len;
+	u16 res, alg, seq, status;
+	int groups[] = { pasn->group, 0 };
+	int ret;
+
+	if (!wd)
+		return -1;
+
+	data = wpabuf_head_u8(wd);
+	buf_len = wpabuf_len(wd);
+
+	if (buf_len < 6) {
+		wpa_printf(MSG_DEBUG, "PASN: SAE buffer too short. len=%lu",
+			   buf_len);
+		return -1;
+	}
+
+	alg = WPA_GET_LE16(data);
+	seq = WPA_GET_LE16(data + 2);
+	status = WPA_GET_LE16(data + 4);
+
+	wpa_printf(MSG_DEBUG, "PASN: SAE commit: alg=%u, seq=%u, status=%u",
+		   alg, seq, status);
+
+	/* TODO: SAE H2E */
+	if (alg != WLAN_AUTH_SAE || seq != 1 || status != WLAN_STATUS_SUCCESS) {
+		wpa_printf(MSG_DEBUG, "PASN: Dropping peer SAE commit");
+		return -1;
+	}
+
+	sae_clear_data(&pasn->sae);
+	pasn->sae.state = SAE_NOTHING;
+
+	ret = sae_set_group(&pasn->sae, pasn->group);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to set SAE group");
+		return -1;
+	}
+
+	password = sae_get_password(hapd, sta, NULL, NULL, NULL, NULL);
+	if (!password) {
+		wpa_printf(MSG_DEBUG, "PASN: No SAE password found");
+		return -1;
+	}
+
+	ret = sae_prepare_commit(hapd->own_addr, sta->addr,
+				 (const u8 *) password, os_strlen(password), 0,
+				 &pasn->sae);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to prepare SAE commit");
+		return -1;
+	}
+
+	res = sae_parse_commit(&pasn->sae, data + 6, buf_len - 6, NULL, 0,
+			       groups, 0);
+	if (res != WLAN_STATUS_SUCCESS) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed parsing SAE commit");
+		return -1;
+	}
+
+	/* Process the commit message and derive the PMK */
+	ret = sae_process_commit(&pasn->sae);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "SAE: Failed to process peer commit");
+		return -1;
+	}
+
+	pasn->sae.state = SAE_COMMITTED;
+
+	return 0;
+}
+
+
+static int pasn_wd_handle_sae_confirm(struct hostapd_data *hapd,
+				      struct sta_info *sta,
+				      struct wpabuf *wd)
+{
+	struct pasn_data *pasn = sta->pasn;
+	const u8 *data;
+	size_t buf_len;
+	u16 res, alg, seq, status;
+
+	if (!wd)
+		return -1;
+
+	data = wpabuf_head_u8(wd);
+	buf_len = wpabuf_len(wd);
+
+	if (buf_len < 6) {
+		wpa_printf(MSG_DEBUG, "PASN: SAE buffer too short. len=%lu",
+			   buf_len);
+		return -1;
+	}
+
+	alg = WPA_GET_LE16(data);
+	seq = WPA_GET_LE16(data + 2);
+	status = WPA_GET_LE16(data + 4);
+
+	wpa_printf(MSG_DEBUG, "PASN: SAE confirm: alg=%u, seq=%u, status=%u",
+		   alg, seq, status);
+
+	if (alg != WLAN_AUTH_SAE || seq != 2 || status != WLAN_STATUS_SUCCESS) {
+		wpa_printf(MSG_DEBUG, "PASN: Dropping peer SAE confirm");
+		return -1;
+	}
+
+	res = sae_check_confirm(&pasn->sae, data + 6, buf_len - 6);
+	if (res != WLAN_STATUS_SUCCESS) {
+		wpa_printf(MSG_DEBUG, "PASN: SAE failed checking confirm");
+		return -1;
+	}
+
+	pasn->sae.state = SAE_ACCEPTED;
+
+	/*
+	 * TODO: Based on on IEEE P802.11az/D2.6, the PMKSA derived with
+	 * PASN/SAE should only be allowed with future PASN only. For now do not
+	 * restrict this only for PASN.
+	 */
+	wpa_auth_pmksa_add_sae(hapd->wpa_auth, sta->addr,
+			       pasn->sae.pmk, pasn->sae.pmkid);
+	return 0;
+}
+
+
+static struct wpabuf * pasn_get_sae_wd(struct hostapd_data *hapd,
+				       struct sta_info *sta)
+{
+	struct pasn_data *pasn = sta->pasn;
+	struct wpabuf *buf = NULL;
+	u8 *len_ptr;
+	size_t len;
+
+	/* Need to add the entire Authentication frame body */
+	buf = wpabuf_alloc(8 + SAE_COMMIT_MAX_LEN + 8 + SAE_CONFIRM_MAX_LEN);
+	if (!buf) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to allocate SAE buffer");
+		return NULL;
+	}
+
+	/* Need to add the entire authentication frame body for the commit */
+	len_ptr = wpabuf_put(buf, 2);
+	wpabuf_put_le16(buf, WLAN_AUTH_SAE);
+	wpabuf_put_le16(buf, 1);
+	wpabuf_put_le16(buf, WLAN_STATUS_SUCCESS);
+
+	/* Write the actual commit and update the length accordingly */
+	sae_write_commit(&pasn->sae, buf, NULL, 0);
+	len = wpabuf_len(buf);
+	WPA_PUT_LE16(len_ptr, len - 2);
+
+	/* Need to add the entire Authentication frame body for the confirm */
+	len_ptr = wpabuf_put(buf, 2);
+	wpabuf_put_le16(buf, WLAN_AUTH_SAE);
+	wpabuf_put_le16(buf, 2);
+	wpabuf_put_le16(buf, WLAN_STATUS_SUCCESS);
+
+	sae_write_confirm(&pasn->sae, buf);
+	WPA_PUT_LE16(len_ptr, wpabuf_len(buf) - len - 2);
+
+	pasn->sae.state = SAE_CONFIRMED;
+
+	return buf;
+}
+
+#endif /* CONFIG_SAE */
+
+
+#ifdef CONFIG_FILS
+
+static struct wpabuf * pasn_get_fils_wd(struct hostapd_data *hapd,
+					struct sta_info *sta)
+{
+	struct pasn_data *pasn = sta->pasn;
+	struct pasn_fils_data *fils = &pasn->fils;
+	struct wpabuf *buf = NULL;
+
+	if (!fils->erp_resp) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Missing erp_resp");
+		return NULL;
+	}
+
+	buf = wpabuf_alloc(1500);
+	if (!buf)
+		return NULL;
+
+	/* Add the authentication algorithm */
+	wpabuf_put_le16(buf, WLAN_AUTH_FILS_SK);
+
+	/* Authentication Transaction seq# */
+	wpabuf_put_le16(buf, 2);
+
+	/* Status Code */
+	wpabuf_put_le16(buf, WLAN_STATUS_SUCCESS);
+
+	/* Own RSNE */
+	wpa_pasn_add_rsne(buf, NULL, pasn->akmp, pasn->cipher);
+
+	/* FILS Nonce */
+	wpabuf_put_u8(buf, WLAN_EID_EXTENSION);
+	wpabuf_put_u8(buf, 1 + FILS_NONCE_LEN);
+	wpabuf_put_u8(buf, WLAN_EID_EXT_FILS_NONCE);
+	wpabuf_put_data(buf, fils->anonce, FILS_NONCE_LEN);
+
+	/* FILS Session */
+	wpabuf_put_u8(buf, WLAN_EID_EXTENSION);
+	wpabuf_put_u8(buf, 1 + FILS_SESSION_LEN);
+	wpabuf_put_u8(buf, WLAN_EID_EXT_FILS_SESSION);
+	wpabuf_put_data(buf, fils->session, FILS_SESSION_LEN);
+
+	/* Wrapped Data */
+	wpabuf_put_u8(buf, WLAN_EID_EXTENSION);
+	wpabuf_put_u8(buf, 1 + wpabuf_len(fils->erp_resp));
+	wpabuf_put_u8(buf, WLAN_EID_EXT_WRAPPED_DATA);
+	wpabuf_put_buf(buf, fils->erp_resp);
+
+	return buf;
+}
+
+
+static void pasn_fils_auth_resp(struct hostapd_data *hapd,
+				struct sta_info *sta, u16 status,
+				struct wpabuf *erp_resp,
+				const u8 *msk, size_t msk_len)
+{
+	struct pasn_data *pasn = sta->pasn;
+	struct pasn_fils_data *fils = &pasn->fils;
+	u8 pmk[PMK_LEN_MAX];
+	size_t pmk_len;
+	int ret;
+
+	wpa_printf(MSG_DEBUG, "PASN: FILS: Handle AS response - status=%u",
+		   status);
+
+	if (status != WLAN_STATUS_SUCCESS)
+		goto fail;
+
+	if (!pasn->secret) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Missing secret");
+		goto fail;
+	}
+
+	if (random_get_bytes(fils->anonce, FILS_NONCE_LEN) < 0) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Failed to get ANonce");
+		goto fail;
+	}
+
+	wpa_hexdump(MSG_DEBUG, "RSN: Generated FILS ANonce",
+		    fils->anonce, FILS_NONCE_LEN);
+
+	ret = fils_rmsk_to_pmk(pasn->akmp, msk, msk_len, fils->nonce,
+			       fils->anonce, NULL, 0, pmk, &pmk_len);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "FILS: Failed to derive PMK");
+		goto fail;
+	}
+
+	ret = pasn_pmk_to_ptk(pmk, pmk_len, sta->addr, hapd->own_addr,
+			      wpabuf_head(pasn->secret),
+			      wpabuf_len(pasn->secret),
+			      &sta->pasn->ptk, sta->pasn->akmp,
+			      sta->pasn->cipher, WPA_KDK_MAX_LEN);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Failed to derive PTK");
+		goto fail;
+	}
+
+	wpa_printf(MSG_DEBUG, "PASN: PTK successfully derived");
+
+	wpabuf_free(pasn->secret);
+	pasn->secret = NULL;
+
+	fils->erp_resp = erp_resp;
+	ret = handle_auth_pasn_resp(hapd, sta, NULL, WLAN_STATUS_SUCCESS);
+	fils->erp_resp = NULL;
+
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Failed to send response");
+		goto fail;
+	}
+
+	fils->state = PASN_FILS_STATE_COMPLETE;
+	return;
+fail:
+	ap_free_sta(hapd, sta);
+}
+
+
+static int pasn_wd_handle_fils(struct hostapd_data *hapd, struct sta_info *sta,
+			       struct wpabuf *wd)
+{
+	struct pasn_data *pasn = sta->pasn;
+	struct pasn_fils_data *fils = &pasn->fils;
+	struct ieee802_11_elems elems;
+	struct wpa_ie_data rsne_data;
+	struct wpabuf *fils_wd;
+	const u8 *data;
+	size_t buf_len;
+	u16 alg, seq, status;
+	int ret;
+
+	if (fils->state != PASN_FILS_STATE_NONE) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Not expecting wrapped data");
+		return -1;
+	}
+
+	if (!wd) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: No wrapped data");
+		return -1;
+	}
+
+	data = wpabuf_head_u8(wd);
+	buf_len = wpabuf_len(wd);
+
+	if (buf_len < 6) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Buffer too short. len=%lu",
+			   buf_len);
+		return -1;
+	}
+
+	alg = WPA_GET_LE16(data);
+	seq = WPA_GET_LE16(data + 2);
+	status = WPA_GET_LE16(data + 4);
+
+	wpa_printf(MSG_DEBUG, "PASN: FILS: alg=%u, seq=%u, status=%u",
+		   alg, seq, status);
+
+	if (alg != WLAN_AUTH_FILS_SK || seq != 1 ||
+	    status != WLAN_STATUS_SUCCESS) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: FILS: Dropping peer authentication");
+		return -1;
+	}
+
+	data += 6;
+	buf_len -= 6;
+
+	if (ieee802_11_parse_elems(data, buf_len, &elems, 1) == ParseFailed) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Could not parse elements");
+		return -1;
+	}
+
+	if (!elems.rsn_ie || !elems.fils_nonce || !elems.fils_nonce ||
+	    !elems.wrapped_data) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Missing IEs");
+		return -1;
+	}
+
+	ret = wpa_parse_wpa_ie_rsn(elems.rsn_ie - 2, elems.rsn_ie_len + 2,
+				   &rsne_data);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Failed parsing RNSE");
+		return -1;
+	}
+
+	ret = wpa_pasn_validate_rsne(&rsne_data);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Failed validating RSNE");
+		return -1;
+	}
+
+	if (rsne_data.num_pmkid) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: FILS: Not expecting PMKID in RSNE");
+		return -1;
+	}
+
+	wpa_hexdump(MSG_DEBUG, "PASN: FILS: Nonce", elems.fils_nonce,
+		    FILS_NONCE_LEN);
+	os_memcpy(fils->nonce, elems.fils_nonce, FILS_NONCE_LEN);
+
+	wpa_hexdump(MSG_DEBUG, "PASN: FILS: Session", elems.fils_session,
+		    FILS_SESSION_LEN);
+	os_memcpy(fils->session, elems.fils_session, FILS_SESSION_LEN);
+
+#ifdef CONFIG_NO_RADIUS
+	wpa_printf(MSG_DEBUG, "PASN: FILS: RADIUS is not configured. Fail");
+	return -1;
+#endif /* CONFIG_NO_RADIUS */
+
+	fils_wd = ieee802_11_defrag(&elems, WLAN_EID_EXTENSION,
+				    WLAN_EID_EXT_WRAPPED_DATA);
+
+	if (!fils_wd) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Missing wrapped data");
+		return -1;
+	}
+
+	if (!sta->eapol_sm)
+		sta->eapol_sm = ieee802_1x_alloc_eapol_sm(hapd, sta);
+
+	wpa_printf(MSG_DEBUG,
+		   "PASN: FILS: Forward EAP-Initiate/Re-auth to AS");
+
+	ieee802_1x_encapsulate_radius(hapd, sta, wpabuf_head(fils_wd),
+				      wpabuf_len(fils_wd));
+
+	sta->flags |= WLAN_STA_PENDING_PASN_FILS_ERP;
+
+	fils->state = PASN_FILS_STATE_PENDING_AS;
+
+	/*
+	 * Calculate pending PMKID here so that we do not need to maintain a
+	 * copy of the EAP-Initiate/Reautt message.
+	 */
+	fils_pmkid_erp(pasn->akmp, wpabuf_head(fils_wd), wpabuf_len(fils_wd),
+		       fils->erp_pmkid);
+
+	wpabuf_free(fils_wd);
+	return 0;
+}
+
+#endif /* CONFIG_FILS */
+
+
+static struct wpabuf * pasn_get_wrapped_data(struct hostapd_data *hapd,
+					     struct sta_info *sta)
+{
+	switch (sta->pasn->akmp) {
+	case WPA_KEY_MGMT_PASN:
+		/* no wrapped data */
+		return NULL;
+	case WPA_KEY_MGMT_SAE:
+#ifdef CONFIG_SAE
+		return pasn_get_sae_wd(hapd, sta);
+#else /* CONFIG_SAE */
+		wpa_printf(MSG_ERROR,
+			   "PASN: SAE: Cannot derive wrapped data");
+		return NULL;
+#endif /* CONFIG_SAE */
+	case WPA_KEY_MGMT_FILS_SHA256:
+	case WPA_KEY_MGMT_FILS_SHA384:
+#ifdef CONFIG_FILS
+		return pasn_get_fils_wd(hapd, sta);
+#endif /* CONFIG_FILS */
+		/* fall through */
+	case WPA_KEY_MGMT_FT_PSK:
+	case WPA_KEY_MGMT_FT_IEEE8021X:
+	case WPA_KEY_MGMT_FT_IEEE8021X_SHA384:
+	default:
+		wpa_printf(MSG_ERROR,
+			   "PASN: TODO: Wrapped data for akmp=0x%x",
+			   sta->pasn->akmp);
+		return NULL;
+	}
+}
+
+
+static int
+pasn_derive_keys(struct hostapd_data *hapd, struct sta_info *sta,
+		 const u8 *cached_pmk, size_t cached_pmk_len,
+		 struct wpa_pasn_params_data *pasn_data,
+		 struct wpabuf *wrapped_data,
+		 struct wpabuf *secret)
+{
+	static const u8 pasn_default_pmk[] = {'P', 'M', 'K', 'z'};
+	u8 pmk[PMK_LEN_MAX];
+	u8 pmk_len;
+	int ret;
+
+	os_memset(pmk, 0, sizeof(pmk));
+	pmk_len = 0;
+
+	if (!cached_pmk || !cached_pmk_len)
+		wpa_printf(MSG_DEBUG, "PASN: No valid PMKSA entry");
+
+	if (sta->pasn->akmp == WPA_KEY_MGMT_PASN) {
+		wpa_printf(MSG_DEBUG, "PASN: Using default PMK");
+
+		pmk_len = WPA_PASN_PMK_LEN;
+		os_memcpy(pmk, pasn_default_pmk, sizeof(pasn_default_pmk));
+	} else if (cached_pmk && cached_pmk_len) {
+		wpa_printf(MSG_DEBUG, "PASN: Using PMKSA entry");
+
+		pmk_len = cached_pmk_len;
+		os_memcpy(pmk, cached_pmk, cached_pmk_len);
+	} else {
+		switch (sta->pasn->akmp) {
+#ifdef CONFIG_SAE
+		case WPA_KEY_MGMT_SAE:
+			if (sta->pasn->sae.state == SAE_COMMITTED) {
+				pmk_len = PMK_LEN;
+				os_memcpy(pmk, sta->pasn->sae.pmk, PMK_LEN);
+				break;
+			}
+#endif /* CONFIG_SAE */
+			/* fall through */
+		default:
+			/* TODO: Derive PMK based on wrapped data */
+			wpa_printf(MSG_DEBUG,
+				   "PASN: Missing PMK derivation");
+			return -1;
+		}
+	}
+
+	ret = pasn_pmk_to_ptk(pmk, pmk_len, sta->addr, hapd->own_addr,
+			      wpabuf_head(secret), wpabuf_len(secret),
+			      &sta->pasn->ptk, sta->pasn->akmp,
+			      sta->pasn->cipher, WPA_KDK_MAX_LEN);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to derive PTK");
+		return -1;
+	}
+
+	wpa_printf(MSG_DEBUG, "PASN: PTK successfully derived");
+	return 0;
+}
+
+
+static int handle_auth_pasn_resp(struct hostapd_data *hapd,
+				 struct sta_info *sta,
+				 struct rsn_pmksa_cache_entry *pmksa,
+				 u16 status)
+{
+	struct wpabuf *buf, *pubkey = NULL, *wrapped_data_buf = NULL;
+	u8 mic[WPA_PASN_MAX_MIC_LEN];
+	u8 mic_len, frame_len, data_len;
+	u8 *ptr;
+	const u8 *frame, *data, *rsn_ie, *rsnxe_ie;
+	u8 *data_buf = NULL;
+	size_t rsn_ie_len;
+	int ret;
+
+	wpa_printf(MSG_DEBUG, "PASN: Building frame 2: status=%u", status);
+
+	buf = wpabuf_alloc(1500);
+	if (!buf)
+		goto fail;
+
+	wpa_pasn_build_auth_header(buf, hapd->own_addr, hapd->own_addr,
+				   sta->addr, 2, status);
+
+	if (status != WLAN_STATUS_SUCCESS)
+		goto done;
+
+	if (wpa_pasn_add_rsne(buf, pmksa ? pmksa->pmkid : NULL,
+			      sta->pasn->akmp, sta->pasn->cipher) < 0)
+		goto fail;
+
+	/* No need to derive PMK if PMKSA is given */
+	if (!pmksa)
+		wrapped_data_buf = pasn_get_wrapped_data(hapd, sta);
+	else
+		sta->pasn->wrapped_data_format = WPA_PASN_WRAPPED_DATA_NO;
+
+	/* Get public key */
+	pubkey = crypto_ecdh_get_pubkey(sta->pasn->ecdh, 0);
+	pubkey = wpabuf_zeropad(pubkey,
+				crypto_ecdh_prime_len(sta->pasn->ecdh));
+	if (!pubkey) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to get pubkey");
+		goto fail;
+	}
+
+	wpa_pasn_add_parameter_ie(buf, sta->pasn->group,
+				  sta->pasn->wrapped_data_format,
+				  pubkey, NULL, 0);
+
+	if (wpa_pasn_add_wrapped_data(buf, wrapped_data_buf) < 0)
+		goto fail;
+
+	wpabuf_free(wrapped_data_buf);
+	wrapped_data_buf = NULL;
+	wpabuf_free(pubkey);
+	pubkey = NULL;
+
+	/* Add RSNXE if needed */
+	rsnxe_ie = hostapd_wpa_ie(hapd, WLAN_EID_RSNX);
+	if (rsnxe_ie)
+		wpabuf_put_data(buf, rsnxe_ie, 2 + rsnxe_ie[1]);
+
+	/* Add the mic */
+	mic_len = pasn_mic_len(sta->pasn->akmp, sta->pasn->cipher);
+	wpabuf_put_u8(buf, WLAN_EID_MIC);
+	wpabuf_put_u8(buf, mic_len);
+	ptr = wpabuf_put(buf, mic_len);
+
+	os_memset(ptr, 0, mic_len);
+
+	frame = wpabuf_head_u8(buf) + IEEE80211_HDRLEN;
+	frame_len = wpabuf_len(buf) - IEEE80211_HDRLEN;
+
+	rsn_ie = wpa_auth_get_wpa_ie(hapd->wpa_auth, &rsn_ie_len);
+	if (!rsn_ie || !rsn_ie_len)
+		goto fail;
+
+	/*
+	 * Note: wpa_auth_get_wpa_ie() might return not only the RSNE but also
+	 * MDE, etc. Thus, do not use the returned length but instead use the
+	 * length specified in the IE header.
+	 */
+	data_len = rsn_ie[1] + 2;
+	if (rsnxe_ie) {
+		data_buf = os_zalloc(rsn_ie[1] + 2 + rsnxe_ie[1] + 2);
+		if (!data_buf)
+			goto fail;
+
+		os_memcpy(data_buf, rsn_ie, rsn_ie[1] + 2);
+		os_memcpy(data_buf + rsn_ie[1] + 2, rsnxe_ie, rsnxe_ie[1] + 2);
+		data_len += rsnxe_ie[1] + 2;
+		data = data_buf;
+	} else {
+		data = rsn_ie;
+	}
+
+	ret = pasn_mic(sta->pasn->ptk.kck, sta->pasn->akmp, sta->pasn->cipher,
+		       hapd->own_addr, sta->addr, data, data_len,
+		       frame, frame_len, mic);
+	os_free(data_buf);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Frame 3: Failed MIC calculation");
+		goto fail;
+	}
+
+	os_memcpy(ptr, mic, mic_len);
+
+done:
+	wpa_printf(MSG_DEBUG,
+		   "PASN: Building frame 2: success; resp STA=" MACSTR,
+		   MAC2STR(sta->addr));
+
+	ret = hostapd_drv_send_mlme(hapd, wpabuf_head(buf), wpabuf_len(buf), 0,
+				    NULL, 0, 0);
+	if (ret)
+		wpa_printf(MSG_INFO, "send_auth_reply: Send failed");
+
+	wpabuf_free(buf);
+	return ret;
+fail:
+	wpabuf_free(wrapped_data_buf);
+	wpabuf_free(pubkey);
+	wpabuf_free(buf);
+	return -1;
+}
+
+
+static void handle_auth_pasn_1(struct hostapd_data *hapd, struct sta_info *sta,
+			       const struct ieee80211_mgmt *mgmt, size_t len)
+{
+	struct ieee802_11_elems elems;
+	struct wpa_ie_data rsn_data;
+	struct wpa_pasn_params_data pasn_params;
+	struct rsn_pmksa_cache_entry *pmksa = NULL;
+	const u8 *cached_pmk = NULL;
+	size_t cached_pmk_len = 0;
+#ifdef CONFIG_IEEE80211R_AP
+	u8 pmk_r1[PMK_LEN_MAX];
+	size_t pmk_r1_len;
+#endif /* CONFIG_IEEE80211R_AP */
+	struct wpabuf *wrapped_data = NULL, *secret = NULL;
+	const int *groups = hapd->conf->pasn_groups;
+	static const int default_groups[] = { 19, 0 };
+	u16 status = WLAN_STATUS_SUCCESS;
+	int ret;
+	bool derive_keys;
+	u32 i;
+
+	if (!groups)
+		groups = default_groups;
+
+	if (ieee802_11_parse_elems(mgmt->u.auth.variable,
+				   len - offsetof(struct ieee80211_mgmt,
+						  u.auth.variable),
+				   &elems, 0) == ParseFailed) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Failed parsing Authentication frame");
+		status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+		goto send_resp;
+	}
+
+	ret = wpa_parse_wpa_ie_rsn(elems.rsn_ie - 2, elems.rsn_ie_len + 2,
+				   &rsn_data);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed parsing RNSE");
+		status = WLAN_STATUS_INVALID_RSNIE;
+		goto send_resp;
+	}
+
+	ret = wpa_pasn_validate_rsne(&rsn_data);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed validating RSNE");
+		status = WLAN_STATUS_INVALID_RSNIE;
+		goto send_resp;
+	}
+
+	if (!(rsn_data.key_mgmt & hapd->conf->wpa_key_mgmt) ||
+	    !(rsn_data.pairwise_cipher & hapd->conf->rsn_pairwise)) {
+		wpa_printf(MSG_DEBUG, "PASN: Mismatch in AKMP/cipher");
+		status = WLAN_STATUS_INVALID_RSNIE;
+		goto send_resp;
+	}
+
+	sta->pasn->akmp = rsn_data.key_mgmt;
+	sta->pasn->cipher = rsn_data.pairwise_cipher;
+
+	if (!elems.pasn_params || !elems.pasn_params_len) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: No PASN Parameters element found");
+		status = WLAN_STATUS_INVALID_PARAMETERS;
+		goto send_resp;
+	}
+
+	ret = wpa_pasn_parse_parameter_ie(elems.pasn_params - 3,
+					  elems.pasn_params_len + 3,
+					  false, &pasn_params);
+	if (ret) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Failed validation of PASN Parameters IE");
+		status = WLAN_STATUS_INVALID_PARAMETERS;
+		goto send_resp;
+	}
+
+	for (i = 0; groups[i] > 0 && groups[i] != pasn_params.group; i++)
+		;
+
+	if (!pasn_params.group || groups[i] != pasn_params.group) {
+		wpa_printf(MSG_DEBUG, "PASN: Requested group=%hu not allowed",
+			   pasn_params.group);
+		status = WLAN_STATUS_FINITE_CYCLIC_GROUP_NOT_SUPPORTED;
+		goto send_resp;
+	}
+
+	if (!pasn_params.pubkey || !pasn_params.pubkey_len) {
+		wpa_printf(MSG_DEBUG, "PASN: Invalid public key");
+		status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+		goto send_resp;
+	}
+
+	sta->pasn->ecdh = crypto_ecdh_init(pasn_params.group);
+	if (!sta->pasn->ecdh) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to init ECDH");
+		status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+		goto send_resp;
+	}
+
+	sta->pasn->group = pasn_params.group;
+
+	secret = crypto_ecdh_set_peerkey(sta->pasn->ecdh, 0,
+					 pasn_params.pubkey,
+					 pasn_params.pubkey_len);
+	if (!secret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to derive shared secret");
+		status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+		goto send_resp;
+	}
+
+	derive_keys = true;
+	if (pasn_params.wrapped_data_format != WPA_PASN_WRAPPED_DATA_NO) {
+		wrapped_data = ieee802_11_defrag(&elems,
+						 WLAN_EID_EXTENSION,
+						 WLAN_EID_EXT_WRAPPED_DATA);
+		if (!wrapped_data) {
+			wpa_printf(MSG_DEBUG, "PASN: Missing wrapped data");
+			status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+			goto send_resp;
+		}
+
+#ifdef CONFIG_SAE
+		if (sta->pasn->akmp == WPA_KEY_MGMT_SAE) {
+			ret = pasn_wd_handle_sae_commit(hapd, sta,
+							wrapped_data);
+			if (ret) {
+				wpa_printf(MSG_DEBUG,
+					   "PASN: Failed processing SAE commit");
+				status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+				goto send_resp;
+			}
+		}
+#endif /* CONFIG_SAE */
+#ifdef CONFIG_FILS
+		if (sta->pasn->akmp == WPA_KEY_MGMT_FILS_SHA256 ||
+		    sta->pasn->akmp == WPA_KEY_MGMT_FILS_SHA384) {
+			ret = pasn_wd_handle_fils(hapd, sta, wrapped_data);
+			if (ret) {
+				wpa_printf(MSG_DEBUG,
+					   "PASN: Failed processing FILS wrapped data");
+				status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+				goto send_resp;
+			}
+
+			wpa_printf(MSG_DEBUG,
+				   "PASN: FILS: Pending AS response");
+
+			/*
+			 * With PASN/FILS, keys can be derived only after a
+			 * response from the AS is processed.
+			 */
+			derive_keys = false;
+		}
+#endif /* CONFIG_FILS */
+	}
+
+	sta->pasn->wrapped_data_format = pasn_params.wrapped_data_format;
+
+	ret = pasn_auth_frame_hash(sta->pasn->akmp, sta->pasn->cipher,
+				   ((const u8 *) mgmt) + IEEE80211_HDRLEN,
+				   len - IEEE80211_HDRLEN, sta->pasn->hash);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to compute hash");
+		status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+		goto send_resp;
+	}
+
+	if (!derive_keys) {
+		wpa_printf(MSG_DEBUG, "PASN: Storing secret");
+		sta->pasn->secret = secret;
+		wpabuf_free(wrapped_data);
+		return;
+	}
+
+	if (rsn_data.num_pmkid) {
+		if (wpa_key_mgmt_ft(sta->pasn->akmp)) {
+#ifdef CONFIG_IEEE80211R_AP
+			wpa_printf(MSG_DEBUG, "PASN: FT: Fetch PMK-R1");
+
+			ret = wpa_ft_fetch_pmk_r1(hapd->wpa_auth, sta->addr,
+						  rsn_data.pmkid,
+						  pmk_r1, &pmk_r1_len, NULL,
+						  NULL, NULL, NULL,
+						  NULL, NULL, NULL);
+			if (ret) {
+				wpa_printf(MSG_DEBUG,
+					   "PASN: FT: Failed getting PMK-R1");
+				status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+				goto send_resp;
+			}
+			cached_pmk = pmk_r1;
+			cached_pmk_len = pmk_r1_len;
+#else /* CONFIG_IEEE80211R_AP */
+			wpa_printf(MSG_DEBUG, "PASN: FT: Not supported");
+			status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+			goto send_resp;
+#endif /* CONFIG_IEEE80211R_AP */
+		} else {
+			wpa_printf(MSG_DEBUG, "PASN: Try to find PMKSA entry");
+
+			pmksa = wpa_auth_pmksa_get(hapd->wpa_auth, sta->addr,
+						   rsn_data.pmkid);
+			if (pmksa) {
+				cached_pmk = pmksa->pmk;
+				cached_pmk_len = pmksa->pmk_len;
+			}
+		}
+	} else {
+		wpa_printf(MSG_DEBUG, "PASN: No PMKID specified");
+	}
+
+	ret = pasn_derive_keys(hapd, sta, cached_pmk, cached_pmk_len,
+			       &pasn_params, wrapped_data, secret);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to derive keys");
+		status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+		goto send_resp;
+	}
+
+	ret = pasn_auth_frame_hash(sta->pasn->akmp, sta->pasn->cipher,
+				   ((const u8 *) mgmt) + IEEE80211_HDRLEN,
+				   len - IEEE80211_HDRLEN, sta->pasn->hash);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to compute hash");
+		status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+	}
+
+send_resp:
+	ret = handle_auth_pasn_resp(hapd, sta, pmksa, status);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to send response");
+		status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+	} else {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Success handling transaction == 1");
+	}
+
+	wpabuf_free(secret);
+	wpabuf_free(wrapped_data);
+
+	if (status != WLAN_STATUS_SUCCESS)
+		ap_free_sta(hapd, sta);
+}
+
+
+static void handle_auth_pasn_3(struct hostapd_data *hapd, struct sta_info *sta,
+			       const struct ieee80211_mgmt *mgmt, size_t len)
+{
+	struct ieee802_11_elems elems;
+	struct wpa_pasn_params_data pasn_params;
+	struct wpabuf *wrapped_data = NULL;
+	u8 mic[WPA_PASN_MAX_MIC_LEN], out_mic[WPA_PASN_MAX_MIC_LEN];
+	u8 mic_len;
+	int ret;
+
+	if (ieee802_11_parse_elems(mgmt->u.auth.variable,
+				   len - offsetof(struct ieee80211_mgmt,
+						  u.auth.variable),
+				   &elems, 0) == ParseFailed) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Failed parsing Authentication frame");
+		goto fail;
+	}
+
+	/* Check that the MIC IE exists. Save it and zero out the memory. */
+	mic_len = pasn_mic_len(sta->pasn->akmp, sta->pasn->cipher);
+	if (!elems.mic || elems.mic_len != mic_len) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Invalid MIC. Expecting len=%u", mic_len);
+		goto fail;
+	} else {
+		os_memcpy(mic, elems.mic, mic_len);
+		/* TODO: Clean this up.. Should not modify received frame
+		 * buffer. */
+		os_memset((u8 *) elems.mic, 0, mic_len);
+	}
+
+	if (!elems.pasn_params || !elems.pasn_params_len) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: No PASN Parameters element found");
+		goto fail;
+	}
+
+	ret = wpa_pasn_parse_parameter_ie(elems.pasn_params - 3,
+					  elems.pasn_params_len + 3,
+					  false, &pasn_params);
+	if (ret) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Failed validation of PASN Parameters IE");
+		goto fail;
+	}
+
+	if (pasn_params.pubkey || pasn_params.pubkey_len) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Public key should not be included");
+		goto fail;
+	}
+
+	/* Verify the MIC */
+	ret = pasn_mic(sta->pasn->ptk.kck, sta->pasn->akmp, sta->pasn->cipher,
+		       sta->addr, hapd->own_addr,
+		       sta->pasn->hash, mic_len * 2,
+		       (u8 *) &mgmt->u.auth,
+		       len - offsetof(struct ieee80211_mgmt, u.auth),
+		       out_mic);
+
+	wpa_hexdump_key(MSG_DEBUG, "PASN: Frame MIC", mic, mic_len);
+	if (ret || os_memcmp(mic, out_mic, mic_len) != 0) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed MIC verification");
+		goto fail;
+	}
+
+	if (pasn_params.wrapped_data_format != WPA_PASN_WRAPPED_DATA_NO) {
+		wrapped_data = ieee802_11_defrag(&elems,
+						 WLAN_EID_EXTENSION,
+						 WLAN_EID_EXT_WRAPPED_DATA);
+
+		if (!wrapped_data) {
+			wpa_printf(MSG_DEBUG, "PASN: Missing wrapped data");
+			goto fail;
+		}
+
+#ifdef CONFIG_SAE
+		if (sta->pasn->akmp == WPA_KEY_MGMT_SAE) {
+			ret = pasn_wd_handle_sae_confirm(hapd, sta,
+							 wrapped_data);
+			if (ret) {
+				wpa_printf(MSG_DEBUG,
+					   "PASN: Failed processing SAE confirm");
+				wpabuf_free(wrapped_data);
+				goto fail;
+			}
+		}
+#endif /* CONFIG_SAE */
+#ifdef CONFIG_FILS
+		if (sta->pasn->akmp == WPA_KEY_MGMT_FILS_SHA256 ||
+		    sta->pasn->akmp == WPA_KEY_MGMT_FILS_SHA384) {
+			if (wrapped_data) {
+				wpa_printf(MSG_DEBUG,
+					   "PASN: FILS: Ignore wrapped data");
+			}
+		}
+#endif /* CONFIG_FILS */
+		wpabuf_free(wrapped_data);
+	}
+
+	wpa_printf(MSG_INFO,
+		   "PASN: Success handling transaction == 3. Store PTK");
+
+	ptksa_cache_add(hapd->ptksa, sta->addr, sta->pasn->cipher, 43200,
+			&sta->pasn->ptk);
+fail:
+	ap_free_sta(hapd, sta);
+}
+
+
+static void handle_auth_pasn(struct hostapd_data *hapd, struct sta_info *sta,
+			     const struct ieee80211_mgmt *mgmt, size_t len,
+			     u16 trans_seq, u16 status)
+{
+	if (hapd->conf->wpa != WPA_PROTO_RSN) {
+		wpa_printf(MSG_INFO, "PASN: RSN is not configured");
+		return;
+	}
+
+	wpa_printf(MSG_INFO, "PASN authentication: sta=" MACSTR,
+		   MAC2STR(sta->addr));
+
+	if (trans_seq == 1) {
+		if (sta->pasn) {
+			wpa_printf(MSG_DEBUG,
+				   "PASN: Not expecting transaction == 1");
+			return;
+		}
+
+		if (status != WLAN_STATUS_SUCCESS) {
+			wpa_printf(MSG_DEBUG,
+				   "PASN: Failure status in transaction == 1");
+			return;
+		}
+
+		sta->pasn = os_zalloc(sizeof(*sta->pasn));
+		if (!sta->pasn) {
+			wpa_printf(MSG_DEBUG,
+				   "PASN: Failed to allocate PASN context");
+			return;
+		}
+
+		handle_auth_pasn_1(hapd, sta, mgmt, len);
+	} else if (trans_seq == 3) {
+		if (!sta->pasn) {
+			wpa_printf(MSG_DEBUG,
+				   "PASN: Not expecting transaction == 3");
+			return;
+		}
+
+		if (status != WLAN_STATUS_SUCCESS) {
+			wpa_printf(MSG_DEBUG,
+				   "PASN: Failure status in transaction == 3");
+			ap_free_sta_pasn(hapd, sta);
+			return;
+		}
+
+		handle_auth_pasn_3(hapd, sta, mgmt, len);
+	} else {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Invalid transaction %u - ignore", trans_seq);
+	}
+}
+
+#endif /* CONFIG_PASN */
+
+
 static void handle_auth(struct hostapd_data *hapd,
 			const struct ieee80211_mgmt *mgmt, size_t len,
 			int rssi, int from_queue)
@@ -2380,6 +3500,11 @@
 	       hapd->conf->fils_dh_group &&
 	       auth_alg == WLAN_AUTH_FILS_SK_PFS) ||
 #endif /* CONFIG_FILS */
+#ifdef CONFIG_PASN
+	      (hapd->conf->wpa &&
+	       (hapd->conf->wpa_key_mgmt & WPA_KEY_MGMT_PASN) &&
+	       auth_alg == WLAN_AUTH_PASN) ||
+#endif /* CONFIG_PASN */
 	      ((hapd->conf->auth_algs & WPA_AUTH_ALG_SHARED) &&
 	       auth_alg == WLAN_AUTH_SHARED_KEY))) {
 		wpa_printf(MSG_INFO, "Unsupported authentication algorithm (%d)",
@@ -2389,6 +3514,9 @@
 	}
 
 	if (!(auth_transaction == 1 || auth_alg == WLAN_AUTH_SAE ||
+#ifdef CONFIG_PASN
+	      (auth_alg == WLAN_AUTH_PASN && auth_transaction == 3) ||
+#endif /* CONFIG_PASN */
 	      (auth_alg == WLAN_AUTH_SHARED_KEY && auth_transaction == 3))) {
 		wpa_printf(MSG_INFO, "Unknown authentication transaction number (%d)",
 			   auth_transaction);
@@ -2510,6 +3638,15 @@
 			return;
 		}
 #endif /* CONFIG_MESH */
+#ifdef CONFIG_PASN
+		if (auth_alg == WLAN_AUTH_PASN &&
+		    (sta->flags & WLAN_STA_ASSOC)) {
+			wpa_printf(MSG_DEBUG,
+				   "PASN: auth: Existing station: " MACSTR,
+				   MAC2STR(sta->addr));
+			return;
+		}
+#endif /* CONFIG_PASN */
 	} else {
 #ifdef CONFIG_MESH
 		if (hapd->conf->mesh & MESH_ENABLED) {
@@ -2570,11 +3707,14 @@
 	 * to allow the original connection work until the attempt can complete
 	 * (re)association, so that unprotected Authentication frame cannot be
 	 * used to bypass PMF protection.
+	 *
+	 * PASN authentication does not require adding/removing station to the
+	 * driver so skip this flow in case of PASN authentication.
 	 */
 	if (FULL_AP_CLIENT_STATE_SUPP(hapd->iface->drv_flags) &&
 	    (!(sta->flags & WLAN_STA_MFP) || !ap_sta_is_authorized(sta)) &&
 	    !(hapd->conf->mesh & MESH_ENABLED) &&
-	    !(sta->added_unassoc)) {
+	    !(sta->added_unassoc) && auth_alg != WLAN_AUTH_PASN) {
 		if (ap_sta_re_add(hapd, sta) < 0) {
 			resp = WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA;
 			goto fail;
@@ -2661,6 +3801,12 @@
 				 handle_auth_fils_finish);
 		return;
 #endif /* CONFIG_FILS */
+#ifdef CONFIG_PASN
+	case WLAN_AUTH_PASN:
+		handle_auth_pasn(hapd, sta, mgmt, len, auth_transaction,
+				 status_code);
+		return;
+#endif /* CONFIG_PASN */
 	}
 
  fail:
@@ -3252,7 +4398,7 @@
 	}
 #endif /* CONFIG_IEEE80211AC */
 #ifdef CONFIG_IEEE80211AX
-	if (hapd->iconf->ieee80211ax) {
+	if (hapd->iconf->ieee80211ax && !hapd->conf->disable_11ax) {
 		resp = copy_sta_he_capab(hapd, sta, IEEE80211_MODE_AP,
 					 elems.he_capabilities,
 					 elems.he_capabilities_len);
@@ -3868,7 +5014,7 @@
 #endif /* CONFIG_IEEE80211AC */
 
 #ifdef CONFIG_IEEE80211AX
-	if (hapd->iconf->ieee80211ax) {
+	if (hapd->iconf->ieee80211ax && !hapd->conf->disable_11ax) {
 		p = hostapd_eid_he_capab(hapd, p, IEEE80211_MODE_AP);
 		p = hostapd_eid_he_operation(hapd, p);
 		p = hostapd_eid_spatial_reuse(hapd, p);
@@ -4882,6 +6028,31 @@
 
 
 /**
+ * notify_mgmt_frame - Notify of Management frames on the control interface
+ * @hapd: hostapd BSS data structure (the BSS to which the Management frame was
+ * sent to)
+ * @buf: Management frame data (starting from the IEEE 802.11 header)
+ * @len: Length of frame data in octets
+ *
+ * Notify the control interface of any received Management frame.
+ */
+static void notify_mgmt_frame(struct hostapd_data *hapd, const u8 *buf,
+			      size_t len)
+{
+
+	int hex_len = len * 2 + 1;
+	char *hex = os_malloc(hex_len);
+
+	if (hex) {
+		wpa_snprintf_hex(hex, hex_len, buf, len);
+		wpa_msg_ctrl(hapd->msg_ctx, MSG_INFO,
+			     AP_MGMT_FRAME_RECEIVED "buf=%s", hex);
+		os_free(hex);
+	}
+}
+
+
+/**
  * ieee802_11_mgmt - process incoming IEEE 802.11 management frames
  * @hapd: hostapd BSS data structure (the BSS to which the management frame was
  * sent to)
@@ -4971,6 +6142,9 @@
 	if (hapd->iconf->track_sta_max_num)
 		sta_track_add(hapd->iface, mgmt->sa, ssi_signal);
 
+	if (hapd->conf->notify_mgmt_frames)
+		notify_mgmt_frame(hapd, buf, len);
+
 	switch (stype) {
 	case WLAN_FC_STYPE_AUTH:
 		wpa_printf(MSG_DEBUG, "mgmt::auth");
@@ -5018,18 +6192,7 @@
 {
 	u16 auth_alg, auth_transaction, status_code;
 	struct sta_info *sta;
-
-	if (len < IEEE80211_HDRLEN + sizeof(mgmt->u.auth)) {
-		wpa_printf(MSG_INFO, "handle_auth_cb - too short payload (len=%lu)",
-			   (unsigned long) len);
-
-		/*
-		 * Initialize status_code here because we are not able to read
-		 * it from the short payload.
-		 */
-		status_code = WLAN_STATUS_UNSPECIFIED_FAILURE;
-		goto fail;
-	}
+	bool success_status;
 
 	sta = ap_get_sta(hapd, mgmt->da);
 	if (!sta) {
@@ -5039,6 +6202,15 @@
 		return;
 	}
 
+	if (len < IEEE80211_HDRLEN + sizeof(mgmt->u.auth)) {
+		wpa_printf(MSG_INFO, "handle_auth_cb - too short payload (len=%lu)",
+			   (unsigned long) len);
+		auth_alg = 0;
+		auth_transaction = 0;
+		status_code = WLAN_STATUS_UNSPECIFIED_FAILURE;
+		goto fail;
+	}
+
 	auth_alg = le_to_host16(mgmt->u.auth.auth_alg);
 	auth_transaction = le_to_host16(mgmt->u.auth.auth_transaction);
 	status_code = le_to_host16(mgmt->u.auth.status_code);
@@ -5062,7 +6234,12 @@
 	}
 
 fail:
-	if (status_code != WLAN_STATUS_SUCCESS && sta->added_unassoc) {
+	success_status = status_code == WLAN_STATUS_SUCCESS;
+#ifdef CONFIG_SAE
+	if (auth_alg == WLAN_AUTH_SAE && auth_transaction == 1)
+		success_status = sae_status_success(hapd, status_code);
+#endif /* CONFIG_SAE */
+	if (!success_status && sta->added_unassoc) {
 		hostapd_drv_sta_remove(hapd, sta->addr);
 		sta->added_unassoc = 0;
 	}
@@ -5592,6 +6769,118 @@
 }
 
 
+u8 * hostapd_eid_txpower_envelope(struct hostapd_data *hapd, u8 *eid)
+{
+	struct hostapd_iface *iface = hapd->iface;
+	struct hostapd_config *iconf = iface->conf;
+	struct hostapd_hw_modes *mode = iface->current_mode;
+	struct hostapd_channel_data *chan;
+	int dfs, i;
+	u8 channel, tx_pwr_count, local_pwr_constraint;
+	int max_tx_power;
+	u8 tx_pwr;
+
+	if (!mode)
+		return eid;
+
+	if (ieee80211_freq_to_chan(iface->freq, &channel) == NUM_HOSTAPD_MODES)
+		return eid;
+
+	for (i = 0; i < mode->num_channels; i++) {
+		if (mode->channels[i].freq == iface->freq)
+			break;
+	}
+	if (i == mode->num_channels)
+		return eid;
+
+	switch (hostapd_get_oper_chwidth(iconf)) {
+	case CHANWIDTH_USE_HT:
+		if (iconf->secondary_channel == 0) {
+			/* Max Transmit Power count = 0 (20 MHz) */
+			tx_pwr_count = 0;
+		} else {
+			/* Max Transmit Power count = 1 (20, 40 MHz) */
+			tx_pwr_count = 1;
+		}
+		break;
+	case CHANWIDTH_80MHZ:
+		/* Max Transmit Power count = 2 (20, 40, and 80 MHz) */
+		tx_pwr_count = 2;
+		break;
+	case CHANWIDTH_80P80MHZ:
+	case CHANWIDTH_160MHZ:
+		/* Max Transmit Power count = 3 (20, 40, 80, 160/80+80 MHz) */
+		tx_pwr_count = 3;
+		break;
+	default:
+		return eid;
+	}
+
+	/*
+	 * Below local_pwr_constraint logic is referred from
+	 * hostapd_eid_pwr_constraint.
+	 *
+	 * Check if DFS is required by regulatory.
+	 */
+	dfs = hostapd_is_dfs_required(hapd->iface);
+	if (dfs < 0)
+		dfs = 0;
+
+	/*
+	 * In order to meet regulations when TPC is not implemented using
+	 * a transmit power that is below the legal maximum (including any
+	 * mitigation factor) should help. In this case, indicate 3 dB below
+	 * maximum allowed transmit power.
+	 */
+	if (hapd->iconf->local_pwr_constraint == -1)
+		local_pwr_constraint = (dfs == 0) ? 0 : 3;
+	else
+		local_pwr_constraint = hapd->iconf->local_pwr_constraint;
+
+	/*
+	 * A STA that is not an AP shall use a transmit power less than or
+	 * equal to the local maximum transmit power level for the channel.
+	 * The local maximum transmit power can be calculated from the formula:
+	 * local max TX pwr = max TX pwr - local pwr constraint
+	 * Where max TX pwr is maximum transmit power level specified for
+	 * channel in Country element and local pwr constraint is specified
+	 * for channel in this Power Constraint element.
+	 */
+	chan = &mode->channels[i];
+	max_tx_power = chan->max_tx_power - local_pwr_constraint;
+
+	/*
+	 * Local Maximum Transmit power is encoded as two's complement
+	 * with a 0.5 dB step.
+	 */
+	max_tx_power *= 2; /* in 0.5 dB steps */
+	if (max_tx_power > 127) {
+		/* 63.5 has special meaning of 63.5 dBm or higher */
+		max_tx_power = 127;
+	}
+	if (max_tx_power < -128)
+		max_tx_power = -128;
+	if (max_tx_power < 0)
+		tx_pwr = 0x80 + max_tx_power + 128;
+	else
+		tx_pwr = max_tx_power;
+
+	*eid++ = WLAN_EID_TRANSMIT_POWER_ENVELOPE;
+	*eid++ = 2 + tx_pwr_count;
+
+	/*
+	 * Max Transmit Power count and
+	 * Max Transmit Power units = 0 (EIRP)
+	 */
+	*eid++ = tx_pwr_count;
+
+	for (i = 0; i <= tx_pwr_count; i++)
+		*eid++ = tx_pwr;
+
+	return eid;
+}
+
+
 u8 * hostapd_eid_wb_chsw_wrapper(struct hostapd_data *hapd, u8 *eid)
 {
 	u8 bw, chan1, chan2 = 0;
diff --git a/src/ap/ieee802_11_he.c b/src/ap/ieee802_11_he.c
index 85b7140..c27bb1f 100644
--- a/src/ap/ieee802_11_he.c
+++ b/src/ap/ieee802_11_he.c
@@ -304,6 +304,11 @@
 	if (spr->sr_ctrl & SPATIAL_REUSE_SRG_INFORMATION_PRESENT) {
 		*spr_param++ = hapd->iface->conf->spr.srg_obss_pd_min_offset;
 		*spr_param++ = hapd->iface->conf->spr.srg_obss_pd_max_offset;
+		os_memcpy(spr_param,
+			  hapd->iface->conf->spr.srg_bss_color_bitmap, 8);
+		spr_param += 8;
+		os_memcpy(spr_param,
+			  hapd->iface->conf->spr.srg_partial_bssid_bitmap, 8);
 		pos += 18;
 	}
 
@@ -313,6 +318,7 @@
 
 u8 * hostapd_eid_he_6ghz_band_cap(struct hostapd_data *hapd, u8 *eid)
 {
+	struct hostapd_config *conf = hapd->iface->conf;
 	struct hostapd_hw_modes *mode = hapd->iface->current_mode;
 	struct he_capabilities *he_cap;
 	struct ieee80211_he_6ghz_band_cap *cap;
@@ -324,8 +330,18 @@
 		return eid;
 
 	he_cap = &mode->he_capab[IEEE80211_MODE_AP];
-	capab = he_cap->he_6ghz_capa;
+	capab = he_cap->he_6ghz_capa & HE_6GHZ_BAND_CAP_MIN_MPDU_START;
+	capab |= (conf->he_6ghz_max_ampdu_len_exp <<
+		  HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_SHIFT) &
+		HE_6GHZ_BAND_CAP_MAX_AMPDU_LEN_EXP_MASK;
+	capab |= (conf->he_6ghz_max_mpdu <<
+		  HE_6GHZ_BAND_CAP_MAX_MPDU_LEN_SHIFT) &
+		HE_6GHZ_BAND_CAP_MAX_MPDU_LEN_MASK;
 	capab |= HE_6GHZ_BAND_CAP_SMPS_DISABLED;
+	if (conf->he_6ghz_rx_ant_pat)
+		capab |= HE_6GHZ_BAND_CAP_RX_ANTPAT_CONS;
+	if (conf->he_6ghz_tx_ant_pat)
+		capab |= HE_6GHZ_BAND_CAP_TX_ANTPAT_CONS;
 
 	pos = eid;
 	*pos++ = WLAN_EID_EXTENSION;
@@ -419,6 +435,7 @@
 		      size_t he_capab_len)
 {
 	if (!he_capab || !hapd->iconf->ieee80211ax ||
+	    hapd->conf->disable_11ax ||
 	    !check_valid_he_mcs(hapd, he_capab, opmode) ||
 	    ieee80211_invalid_he_cap_size(he_capab, he_capab_len) ||
 	    he_capab_len > sizeof(struct ieee80211_he_capabilities)) {
@@ -448,6 +465,7 @@
 			   const u8 *he_6ghz_capab)
 {
 	if (!he_6ghz_capab || !hapd->iconf->ieee80211ax ||
+	    hapd->conf->disable_11ax ||
 	    !is_6ghz_op_class(hapd->iconf->op_class)) {
 		sta->flags &= ~WLAN_STA_6GHZ;
 		os_free(sta->he_6ghz_capab);
diff --git a/src/ap/ieee802_11_shared.c b/src/ap/ieee802_11_shared.c
index 17003d5..a429b5d 100644
--- a/src/ap/ieee802_11_shared.c
+++ b/src/ap/ieee802_11_shared.c
@@ -425,7 +425,9 @@
 					       * Identifiers Used Exclusively */
 		}
 #endif /* CONFIG_SAE */
-		if (hapd->conf->beacon_prot)
+		if (hapd->conf->beacon_prot &&
+		    (hapd->iface->drv_flags &
+		     WPA_DRIVER_FLAGS_BEACON_PROTECTION))
 			*pos |= 0x10; /* Bit 84 - Beacon Protection Enabled */
 		break;
 	case 11: /* Bits 88-95 */
@@ -494,7 +496,8 @@
 	    hostapd_sae_pw_id_in_use(hapd->conf))
 		len = 11;
 #endif /* CONFIG_SAE */
-	if (len < 11 && hapd->conf->beacon_prot)
+	if (len < 11 && hapd->conf->beacon_prot &&
+	    (hapd->iface->drv_flags & WPA_DRIVER_FLAGS_BEACON_PROTECTION))
 		len = 11;
 #ifdef CONFIG_SAE_PK
 	if (len < 12 && hapd->conf->wpa &&
@@ -1097,29 +1100,45 @@
 {
 	u8 *pos = eid;
 	bool sae_pk = false;
+	u16 capab = 0;
+	size_t flen;
+
+	if (!(hapd->conf->wpa & WPA_PROTO_RSN))
+		return eid;
 
 #ifdef CONFIG_SAE_PK
 	sae_pk = hostapd_sae_pk_in_use(hapd->conf);
 #endif /* CONFIG_SAE_PK */
 
-	if (!(hapd->conf->wpa & WPA_PROTO_RSN) ||
-	    !wpa_key_mgmt_sae(hapd->conf->wpa_key_mgmt) ||
-	    (hapd->conf->sae_pwe != 1 && hapd->conf->sae_pwe != 2 &&
-	     !hostapd_sae_pw_id_in_use(hapd->conf) && !sae_pk) ||
-	    hapd->conf->sae_pwe == 3 ||
-	    len < 3)
-		return pos;
+	if (wpa_key_mgmt_sae(hapd->conf->wpa_key_mgmt) &&
+	    (hapd->conf->sae_pwe == 1 || hapd->conf->sae_pwe == 2 ||
+	     hostapd_sae_pw_id_in_use(hapd->conf) || sae_pk) &&
+	    hapd->conf->sae_pwe != 3) {
+		capab |= BIT(WLAN_RSNX_CAPAB_SAE_H2E);
+#ifdef CONFIG_SAE_PK
+		if (sae_pk)
+			capab |= BIT(WLAN_RSNX_CAPAB_SAE_PK);
+#endif /* CONFIG_SAE_PK */
+	}
+
+	if (hapd->iface->drv_flags2 & WPA_DRIVER_FLAGS2_SEC_LTF)
+		capab |= BIT(WLAN_RSNX_CAPAB_SECURE_LTF);
+	if (hapd->iface->drv_flags2 & WPA_DRIVER_FLAGS2_SEC_RTT)
+		capab |= BIT(WLAN_RSNX_CAPAB_SECURE_RTT);
+	if (hapd->iface->drv_flags2 & WPA_DRIVER_FLAGS2_PROT_RANGE_NEG)
+		capab |= BIT(WLAN_RSNX_CAPAB_PROT_RANGE_NEG);
+
+	flen = (capab & 0xff00) ? 2 : 1;
+	if (len < 2 + flen || !capab)
+		return eid; /* no supported extended RSN capabilities */
+	capab |= flen - 1; /* bit 0-3 = Field length (n - 1) */
 
 	*pos++ = WLAN_EID_RSNX;
-	*pos++ = 1;
-	/* bits 0-3 = 0 since only one octet of Extended RSN Capabilities is
-	 * used for now */
-	*pos = BIT(WLAN_RSNX_CAPAB_SAE_H2E);
-#ifdef CONFIG_SAE_PK
-	if (sae_pk)
-		*pos |= BIT(WLAN_RSNX_CAPAB_SAE_PK);
-#endif /* CONFIG_SAE_PK */
-	pos++;
+	*pos++ = flen;
+	*pos++ = capab & 0x00ff;
+	capab >>= 8;
+	if (capab)
+		*pos++ = capab;
 
 	return pos;
 }
diff --git a/src/ap/ieee802_11_vht.c b/src/ap/ieee802_11_vht.c
index c925bf1..d037022 100644
--- a/src/ap/ieee802_11_vht.c
+++ b/src/ap/ieee802_11_vht.c
@@ -167,118 +167,6 @@
 }
 
 
-u8 * hostapd_eid_txpower_envelope(struct hostapd_data *hapd, u8 *eid)
-{
-	struct hostapd_iface *iface = hapd->iface;
-	struct hostapd_config *iconf = iface->conf;
-	struct hostapd_hw_modes *mode = iface->current_mode;
-	struct hostapd_channel_data *chan;
-	int dfs, i;
-	u8 channel, tx_pwr_count, local_pwr_constraint;
-	int max_tx_power;
-	u8 tx_pwr;
-
-	if (!mode)
-		return eid;
-
-	if (ieee80211_freq_to_chan(iface->freq, &channel) == NUM_HOSTAPD_MODES)
-		return eid;
-
-	for (i = 0; i < mode->num_channels; i++) {
-		if (mode->channels[i].freq == iface->freq)
-			break;
-	}
-	if (i == mode->num_channels)
-		return eid;
-
-	switch (iface->conf->vht_oper_chwidth) {
-	case CHANWIDTH_USE_HT:
-		if (iconf->secondary_channel == 0) {
-			/* Max Transmit Power count = 0 (20 MHz) */
-			tx_pwr_count = 0;
-		} else {
-			/* Max Transmit Power count = 1 (20, 40 MHz) */
-			tx_pwr_count = 1;
-		}
-		break;
-	case CHANWIDTH_80MHZ:
-		/* Max Transmit Power count = 2 (20, 40, and 80 MHz) */
-		tx_pwr_count = 2;
-		break;
-	case CHANWIDTH_80P80MHZ:
-	case CHANWIDTH_160MHZ:
-		/* Max Transmit Power count = 3 (20, 40, 80, 160/80+80 MHz) */
-		tx_pwr_count = 3;
-		break;
-	default:
-		return eid;
-	}
-
-	/*
-	 * Below local_pwr_constraint logic is referred from
-	 * hostapd_eid_pwr_constraint.
-	 *
-	 * Check if DFS is required by regulatory.
-	 */
-	dfs = hostapd_is_dfs_required(hapd->iface);
-	if (dfs < 0)
-		dfs = 0;
-
-	/*
-	 * In order to meet regulations when TPC is not implemented using
-	 * a transmit power that is below the legal maximum (including any
-	 * mitigation factor) should help. In this case, indicate 3 dB below
-	 * maximum allowed transmit power.
-	 */
-	if (hapd->iconf->local_pwr_constraint == -1)
-		local_pwr_constraint = (dfs == 0) ? 0 : 3;
-	else
-		local_pwr_constraint = hapd->iconf->local_pwr_constraint;
-
-	/*
-	 * A STA that is not an AP shall use a transmit power less than or
-	 * equal to the local maximum transmit power level for the channel.
-	 * The local maximum transmit power can be calculated from the formula:
-	 * local max TX pwr = max TX pwr - local pwr constraint
-	 * Where max TX pwr is maximum transmit power level specified for
-	 * channel in Country element and local pwr constraint is specified
-	 * for channel in this Power Constraint element.
-	 */
-	chan = &mode->channels[i];
-	max_tx_power = chan->max_tx_power - local_pwr_constraint;
-
-	/*
-	 * Local Maximum Transmit power is encoded as two's complement
-	 * with a 0.5 dB step.
-	 */
-	max_tx_power *= 2; /* in 0.5 dB steps */
-	if (max_tx_power > 127) {
-		/* 63.5 has special meaning of 63.5 dBm or higher */
-		max_tx_power = 127;
-	}
-	if (max_tx_power < -128)
-		max_tx_power = -128;
-	if (max_tx_power < 0)
-		tx_pwr = 0x80 + max_tx_power + 128;
-	else
-		tx_pwr = max_tx_power;
-
-	*eid++ = WLAN_EID_VHT_TRANSMIT_POWER_ENVELOPE;
-	*eid++ = 2 + tx_pwr_count;
-
-	/*
-	 * Max Transmit Power count and
-	 * Max Transmit Power units = 0 (EIRP)
-	 */
-	*eid++ = tx_pwr_count;
-
-	for (i = 0; i <= tx_pwr_count; i++)
-		*eid++ = tx_pwr;
-
-	return eid;
-}
-
-
 u16 copy_sta_vht_capab(struct hostapd_data *hapd, struct sta_info *sta,
 		       const u8 *vht_capab)
 {
diff --git a/src/ap/ieee802_1x.c b/src/ap/ieee802_1x.c
index ee095f6..753c883 100644
--- a/src/ap/ieee802_1x.c
+++ b/src/ap/ieee802_1x.c
@@ -2067,7 +2067,8 @@
 
 #ifdef CONFIG_FILS
 #ifdef NEED_AP_MLME
-	if (sta->flags & WLAN_STA_PENDING_FILS_ERP) {
+	if (sta->flags &
+	    (WLAN_STA_PENDING_FILS_ERP | WLAN_STA_PENDING_PASN_FILS_ERP)) {
 		/* TODO: Add a PMKSA entry on success? */
 		ieee802_11_finish_fils_auth(
 			hapd, sta, hdr->code == RADIUS_CODE_ACCESS_ACCEPT,
diff --git a/src/ap/neighbor_db.c b/src/ap/neighbor_db.c
index 01bf886..2bbe318 100644
--- a/src/ap/neighbor_db.c
+++ b/src/ap/neighbor_db.c
@@ -220,7 +220,7 @@
 	u16 capab = hostapd_own_capab_info(hapd);
 	int ht = hapd->iconf->ieee80211n && !hapd->conf->disable_11n;
 	int vht = hapd->iconf->ieee80211ac && !hapd->conf->disable_11ac;
-	int he = hapd->iconf->ieee80211ax;
+	int he = hapd->iconf->ieee80211ax && !hapd->conf->disable_11ax;
 	struct wpa_ssid_value ssid;
 	u8 channel, op_class;
 	u8 center_freq1_idx = 0, center_freq2_idx = 0;
diff --git a/src/ap/sta_info.c b/src/ap/sta_info.c
index 67b5e98..ccd1ed9 100644
--- a/src/ap/sta_info.c
+++ b/src/ap/sta_info.c
@@ -156,6 +156,37 @@
 }
 
 
+#ifdef CONFIG_PASN
+
+void ap_free_sta_pasn(struct hostapd_data *hapd, struct sta_info *sta)
+{
+	if (sta->pasn) {
+		wpa_printf(MSG_DEBUG, "PASN: Free PASN context: " MACSTR,
+			   MAC2STR(sta->addr));
+
+		if (sta->pasn->ecdh)
+			crypto_ecdh_deinit(sta->pasn->ecdh);
+
+		wpabuf_free(sta->pasn->secret);
+		sta->pasn->secret = NULL;
+
+#ifdef CONFIG_SAE
+		sae_clear_data(&sta->pasn->sae);
+#endif /* CONFIG_SAE */
+
+#ifdef CONFIG_FILS
+		/* In practice this pointer should be NULL */
+		wpabuf_free(sta->pasn->fils.erp_resp);
+		sta->pasn->fils.erp_resp = NULL;
+#endif /* CONFIG_FILS */
+
+		bin_clear_free(sta->pasn, sizeof(*sta->pasn));
+		sta->pasn = NULL;
+	}
+}
+
+#endif /* CONFIG_PASN */
+
 void ap_free_sta(struct hostapd_data *hapd, struct sta_info *sta)
 {
 	int set_beacon = 0;
@@ -371,6 +402,10 @@
 	eloop_cancel_timeout(ap_sta_reset_steer_flag_timer, hapd, sta);
 #endif /* CONFIG_WNM_AP */
 
+#ifdef CONFIG_PASN
+	ap_free_sta_pasn(hapd, sta);
+#endif /* CONFIG_PASN */
+
 	os_free(sta->ifname_wds);
 
 #ifdef CONFIG_TESTING_OPTIONS
diff --git a/src/ap/sta_info.h b/src/ap/sta_info.h
index ef48561..efa48e7 100644
--- a/src/ap/sta_info.h
+++ b/src/ap/sta_info.h
@@ -14,6 +14,8 @@
 #include "vlan.h"
 #include "common/wpa_common.h"
 #include "common/ieee802_11_defs.h"
+#include "common/sae.h"
+#include "crypto/sha384.h"
 
 /* STA flags */
 #define WLAN_STA_AUTH BIT(0)
@@ -39,6 +41,7 @@
 #define WLAN_STA_MULTI_AP BIT(23)
 #define WLAN_STA_HE BIT(24)
 #define WLAN_STA_6GHZ BIT(25)
+#define WLAN_STA_PENDING_PASN_FILS_ERP BIT(26)
 #define WLAN_STA_PENDING_DISASSOC_CB BIT(29)
 #define WLAN_STA_PENDING_DEAUTH_CB BIT(30)
 #define WLAN_STA_NONERP BIT(31)
@@ -63,6 +66,42 @@
 	struct os_reltime rx_time;
 };
 
+enum pasn_fils_state {
+	PASN_FILS_STATE_NONE = 0,
+	PASN_FILS_STATE_PENDING_AS,
+	PASN_FILS_STATE_COMPLETE
+};
+
+struct pasn_fils_data {
+	u8 state;
+	u8 nonce[FILS_NONCE_LEN];
+	u8 anonce[FILS_NONCE_LEN];
+	u8 session[FILS_SESSION_LEN];
+	u8 erp_pmkid[PMKID_LEN];
+
+	struct wpabuf *erp_resp;
+};
+
+struct pasn_data {
+	int akmp;
+	int cipher;
+	u16 group;
+	u8 trans_seq;
+	u8 wrapped_data_format;
+
+	u8 hash[SHA384_MAC_LEN];
+	struct wpa_ptk ptk;
+	struct crypto_ecdh *ecdh;
+
+	struct wpabuf *secret;
+#ifdef CONFIG_SAE
+	struct sae_data sae;
+#endif /* CONFIG_SAE */
+#ifdef CONFIG_FILS
+	struct pasn_fils_data fils;
+#endif /* CONFIG_FILS */
+};
+
 struct sta_info {
 	struct sta_info *next; /* next entry in sta list */
 	struct sta_info *hnext; /* next entry in hash table list */
@@ -286,6 +325,10 @@
 	unsigned int airtime_weight;
 	struct os_reltime backlogged_until;
 #endif /* CONFIG_AIRTIME_POLICY */
+
+#ifdef CONFIG_PASN
+	struct pasn_data *pasn;
+#endif /* CONFIG_PASN */
 };
 
 
@@ -363,4 +406,6 @@
 						   struct sta_info *sta);
 int ap_sta_re_add(struct hostapd_data *hapd, struct sta_info *sta);
 
+void ap_free_sta_pasn(struct hostapd_data *hapd, struct sta_info *sta);
+
 #endif /* STA_INFO_H */
diff --git a/src/ap/wnm_ap.c b/src/ap/wnm_ap.c
index be81797..d32967e 100644
--- a/src/ap/wnm_ap.c
+++ b/src/ap/wnm_ap.c
@@ -169,7 +169,9 @@
 		pos += igtk_elem_len;
 		wpa_printf(MSG_DEBUG, "Pass 4 igtk_len = %d",
 			   (int) igtk_elem_len);
-		if (hapd->conf->beacon_prot) {
+		if (hapd->conf->beacon_prot &&
+		    (hapd->iface->drv_flags &
+		     WPA_DRIVER_FLAGS_BEACON_PROTECTION)) {
 			res = wpa_wnmsleep_bigtk_subelem(sta->wpa_sm, pos);
 			if (res < 0)
 				goto fail;
@@ -537,7 +539,8 @@
 {
 	struct sta_info *sta;
 
-	if (!hapd->conf->beacon_prot)
+	if (!hapd->conf->beacon_prot ||
+	    !(hapd->iface->drv_flags & WPA_DRIVER_FLAGS_BEACON_PROTECTION))
 		return;
 
 	sta = ap_get_sta(hapd, addr);
diff --git a/src/ap/wpa_auth.c b/src/ap/wpa_auth.c
index e48894f..e2e6e1f 100644
--- a/src/ap/wpa_auth.c
+++ b/src/ap/wpa_auth.c
@@ -228,6 +228,23 @@
 }
 
 
+void wpa_auth_store_ptksa(struct wpa_authenticator *wpa_auth,
+			  const u8 *addr, int cipher,
+			  u32 life_time, const struct wpa_ptk *ptk)
+{
+	if (wpa_auth->cb->store_ptksa)
+		wpa_auth->cb->store_ptksa(wpa_auth->cb_ctx, addr, cipher,
+					  life_time, ptk);
+}
+
+
+void wpa_auth_remove_ptksa(struct wpa_authenticator *wpa_auth,
+			   const u8 *addr, int cipher)
+{
+	if (wpa_auth->cb->clear_ptksa)
+		wpa_auth->cb->clear_ptksa(wpa_auth->cb_ctx, addr, cipher);
+}
+
 void wpa_auth_logger(struct wpa_authenticator *wpa_auth, const u8 *addr,
 		     logger_level level, const char *txt)
 {
@@ -1748,6 +1765,9 @@
 {
 	sm->PTK_valid = false;
 	os_memset(&sm->PTK, 0, sizeof(sm->PTK));
+
+	wpa_auth_remove_ptksa(sm->wpa_auth, sm->addr, sm->pairwise);
+
 	if (wpa_auth_set_key(sm->wpa_auth, 0, WPA_ALG_NONE, sm->addr, 0, NULL,
 			     0, KEY_FLAG_PAIRWISE))
 		wpa_printf(MSG_DEBUG,
@@ -2267,9 +2287,17 @@
 			  struct wpa_ptk *ptk, int force_sha256)
 {
 	const u8 *z = NULL;
-	size_t z_len = 0;
+	size_t z_len = 0, kdk_len;
 	int akmp;
 
+	if (sm->wpa_auth->conf.force_kdk_derivation ||
+	    (sm->wpa_auth->conf.secure_ltf &&
+	     sm->rsnxe && sm->rsnxe_len >= 4 &&
+	     sm->rsnxe[3] & BIT(WLAN_RSNX_CAPAB_SECURE_LTF - 8)))
+		kdk_len = WPA_KDK_MAX_LEN;
+	else
+		kdk_len = 0;
+
 #ifdef CONFIG_IEEE80211R_AP
 	if (wpa_key_mgmt_ft(sm->wpa_key_mgmt)) {
 		if (sm->ft_completed) {
@@ -2281,7 +2309,8 @@
 						 sm->pmk_r1_name,
 						 ptk, ptk_name,
 						 sm->wpa_key_mgmt,
-						 sm->pairwise);
+						 sm->pairwise,
+						 kdk_len);
 		}
 		return wpa_auth_derive_ptk_ft(sm, ptk);
 	}
@@ -2299,7 +2328,7 @@
 		akmp |= WPA_KEY_MGMT_PSK_SHA256;
 	return wpa_pmk_to_ptk(pmk, pmk_len, "Pairwise key expansion",
 			      sm->wpa_auth->addr, sm->addr, sm->ANonce, snonce,
-			      ptk, akmp, sm->pairwise, z, z_len);
+			      ptk, akmp, sm->pairwise, z, z_len, kdk_len);
 }
 
 
@@ -2314,13 +2343,21 @@
 	size_t ick_len;
 	int res;
 	u8 fils_ft[FILS_FT_MAX_LEN];
-	size_t fils_ft_len = 0;
+	size_t fils_ft_len = 0, kdk_len;
+
+	if (sm->wpa_auth->conf.force_kdk_derivation ||
+	    (sm->wpa_auth->conf.secure_ltf &&
+	     sm->rsnxe && sm->rsnxe_len >= 4 &&
+	     sm->rsnxe[3] & BIT(WLAN_RSNX_CAPAB_SECURE_LTF - 8)))
+		kdk_len = WPA_KDK_MAX_LEN;
+	else
+		kdk_len = 0;
 
 	res = fils_pmk_to_ptk(pmk, pmk_len, sm->addr, sm->wpa_auth->addr,
 			      snonce, anonce, dhss, dhss_len,
 			      &sm->PTK, ick, &ick_len,
 			      sm->wpa_key_mgmt, sm->pairwise,
-			      fils_ft, &fils_ft_len);
+			      fils_ft, &fils_ft_len, kdk_len);
 	if (res < 0)
 		return res;
 	sm->PTK_valid = true;
@@ -2828,6 +2865,9 @@
 	}
 	sm->tk_already_set = true;
 
+	wpa_auth_store_ptksa(sm->wpa_auth, sm->addr, sm->pairwise,
+			     dot11RSNAConfigPMKLifetime, &sm->PTK);
+
 	return 0;
 }
 
@@ -3154,7 +3194,7 @@
 	sm->pending_1_of_4_timeout = 0;
 	eloop_cancel_timeout(wpa_send_eapol_timeout, sm->wpa_auth, sm);
 
-	if (wpa_key_mgmt_wpa_psk(sm->wpa_key_mgmt)) {
+	if (wpa_key_mgmt_wpa_psk(sm->wpa_key_mgmt) && sm->PMK != pmk) {
 		/* PSK may have changed from the previous choice, so update
 		 * state machine data based on whatever PSK was selected here.
 		 */
@@ -3362,6 +3402,8 @@
 	    wpa_ie_len > wpa_ie[1] + 2U && wpa_ie[0] == WLAN_EID_RSN) {
 		/* WPA-only STA, remove RSN IE and possible MDIE */
 		wpa_ie = wpa_ie + wpa_ie[1] + 2;
+		if (wpa_ie[0] == WLAN_EID_RSNX)
+			wpa_ie = wpa_ie + wpa_ie[1] + 2;
 		if (wpa_ie[0] == WLAN_EID_MOBILITY_DOMAIN)
 			wpa_ie = wpa_ie + wpa_ie[1] + 2;
 		wpa_ie_len = wpa_ie[1] + 2;
@@ -3616,6 +3658,8 @@
 		sm->pairwise_set = true;
 
 		wpa_auth_set_ptk_rekey_timer(sm);
+		wpa_auth_store_ptksa(sm->wpa_auth, sm->addr, sm->pairwise,
+				     dot11RSNAConfigPMKLifetime, &sm->PTK);
 
 		if (wpa_key_mgmt_wpa_psk(sm->wpa_key_mgmt) ||
 		    sm->wpa_key_mgmt == WPA_KEY_MGMT_DPP ||
@@ -5364,6 +5408,8 @@
 	    wpa_ie_len > wpa_ie[1] + 2 && wpa_ie[0] == WLAN_EID_RSN) {
 		/* WPA-only STA, remove RSN IE and possible MDIE */
 		wpa_ie = wpa_ie + wpa_ie[1] + 2;
+		if (wpa_ie[0] == WLAN_EID_RSNX)
+			wpa_ie = wpa_ie + wpa_ie[1] + 2;
 		if (wpa_ie[0] == WLAN_EID_MOBILITY_DOMAIN)
 			wpa_ie = wpa_ie + wpa_ie[1] + 2;
 		wpa_ie_len = wpa_ie[1] + 2;
diff --git a/src/ap/wpa_auth.h b/src/ap/wpa_auth.h
index ff90464..70c13f6 100644
--- a/src/ap/wpa_auth.h
+++ b/src/ap/wpa_auth.h
@@ -259,11 +259,22 @@
 #endif /* CONFIG_FILS */
 	int sae_pwe;
 	bool sae_pk;
+
+	unsigned int secure_ltf:1;
+	unsigned int secure_rtt:1;
+	unsigned int prot_range_neg:1;
+
 	int owe_ptk_workaround;
 	u8 transition_disable;
 #ifdef CONFIG_DPP2
 	int dpp_pfs;
 #endif /* CONFIG_DPP2 */
+
+	/*
+	 * If set Key Derivation Key should be derived as part of PMK to
+	 * PTK derivation regardless of advertised capabilities.
+	 */
+	bool force_kdk_derivation;
 };
 
 typedef enum {
@@ -308,6 +319,9 @@
 	int (*get_sta_tx_params)(void *ctx, const u8 *addr,
 				 int ap_max_chanwidth, int ap_seg1_idx,
 				 int *bandwidth, int *seg1_idx);
+	void (*store_ptksa)(void *ctx, const u8 *addr, int cipher,
+			    u32 life_time, const struct wpa_ptk *ptk);
+	void (*clear_ptksa)(void *ctx, const u8 *addr, int cipher);
 #ifdef CONFIG_IEEE80211R_AP
 	struct wpa_state_machine * (*add_sta)(void *ctx, const u8 *sta_addr);
 	int (*add_sta_ft)(void *ctx, const u8 *sta_addr);
@@ -461,6 +475,14 @@
 void wpa_ft_push_pmk_r1(struct wpa_authenticator *wpa_auth, const u8 *addr);
 void wpa_ft_deinit(struct wpa_authenticator *wpa_auth);
 void wpa_ft_sta_deinit(struct wpa_state_machine *sm);
+int wpa_ft_fetch_pmk_r1(struct wpa_authenticator *wpa_auth,
+			const u8 *spa, const u8 *pmk_r1_name,
+			u8 *pmk_r1, size_t *pmk_r1_len, int *pairwise,
+			struct vlan_description *vlan,
+			const u8 **identity, size_t *identity_len,
+			const u8 **radius_cui, size_t *radius_cui_len,
+			int *session_timeout);
+
 #endif /* CONFIG_IEEE80211R_AP */
 
 void wpa_wnmsleep_rekey_gtk(struct wpa_state_machine *sm);
@@ -517,6 +539,8 @@
 u8 * wpa_auth_write_assoc_resp_fils(struct wpa_state_machine *sm,
 				    u8 *pos, size_t max_len,
 				    const u8 *req_ies, size_t req_ies_len);
+bool wpa_auth_write_fd_rsn_info(struct wpa_authenticator *wpa_auth,
+				u8 *fd_rsn_info);
 void wpa_auth_set_auth_alg(struct wpa_state_machine *sm, u16 auth_alg);
 void wpa_auth_set_dpp_z(struct wpa_state_machine *sm, const struct wpabuf *z);
 void wpa_auth_set_transition_disable(struct wpa_authenticator *wpa_auth,
diff --git a/src/ap/wpa_auth_ft.c b/src/ap/wpa_auth_ft.c
index 5aa363e..32b7456 100644
--- a/src/ap/wpa_auth_ft.c
+++ b/src/ap/wpa_auth_ft.c
@@ -1473,13 +1473,13 @@
 }
 
 
-static int wpa_ft_fetch_pmk_r1(struct wpa_authenticator *wpa_auth,
-			       const u8 *spa, const u8 *pmk_r1_name,
-			       u8 *pmk_r1, size_t *pmk_r1_len, int *pairwise,
-			       struct vlan_description *vlan,
-			       const u8 **identity, size_t *identity_len,
-			       const u8 **radius_cui, size_t *radius_cui_len,
-			       int *session_timeout)
+int wpa_ft_fetch_pmk_r1(struct wpa_authenticator *wpa_auth,
+			const u8 *spa, const u8 *pmk_r1_name,
+			u8 *pmk_r1, size_t *pmk_r1_len, int *pairwise,
+			struct vlan_description *vlan,
+			const u8 **identity, size_t *identity_len,
+			const u8 **radius_cui, size_t *radius_cui_len,
+			int *session_timeout)
 {
 	struct wpa_ft_pmk_cache *cache = wpa_auth->ft_pmk_cache;
 	struct wpa_ft_pmk_r1_sa *r1;
@@ -2147,7 +2147,8 @@
 
 	return wpa_pmk_r1_to_ptk(pmk_r1, pmk_r1_len, sm->SNonce, sm->ANonce,
 				 sm->addr, sm->wpa_auth->addr, sm->pmk_r1_name,
-				 ptk, ptk_name, sm->wpa_key_mgmt, sm->pairwise);
+				 ptk, ptk_name, sm->wpa_key_mgmt, sm->pairwise,
+				 0);
 }
 
 
@@ -3065,7 +3066,7 @@
 	const u8 *identity, *radius_cui;
 	size_t identity_len = 0, radius_cui_len = 0;
 	int use_sha384;
-	size_t pmk_r1_len;
+	size_t pmk_r1_len, kdk_len;
 
 	*resp_ies = NULL;
 	*resp_ies_len = 0;
@@ -3195,10 +3196,18 @@
 	wpa_hexdump(MSG_DEBUG, "FT: Generated ANonce",
 		    sm->ANonce, WPA_NONCE_LEN);
 
+	if (sm->wpa_auth->conf.force_kdk_derivation ||
+	    (sm->wpa_auth->conf.secure_ltf &&
+	     sm->rsnxe && sm->rsnxe_len >= 4 &&
+	     sm->rsnxe[3] & BIT(WLAN_RSNX_CAPAB_SECURE_LTF - 8)))
+		kdk_len = WPA_KDK_MAX_LEN;
+	else
+		kdk_len = 0;
+
 	if (wpa_pmk_r1_to_ptk(pmk_r1, pmk_r1_len, sm->SNonce, sm->ANonce,
 			      sm->addr, sm->wpa_auth->addr, pmk_r1_name,
 			      &sm->PTK, ptk_name, sm->wpa_key_mgmt,
-			      pairwise) < 0)
+			      pairwise, kdk_len) < 0)
 		return WLAN_STATUS_UNSPECIFIED_FAILURE;
 
 	sm->pairwise = pairwise;
diff --git a/src/ap/wpa_auth_glue.c b/src/ap/wpa_auth_glue.c
index bb44c7a..e755018 100644
--- a/src/ap/wpa_auth_glue.c
+++ b/src/ap/wpa_auth_glue.c
@@ -14,6 +14,7 @@
 #include "common/ieee802_11_defs.h"
 #include "common/sae.h"
 #include "common/wpa_ctrl.h"
+#include "common/ptksa_cache.h"
 #include "crypto/sha1.h"
 #include "eapol_auth/eapol_auth_sm.h"
 #include "eapol_auth/eapol_auth_sm_i.h"
@@ -210,6 +211,11 @@
 #ifdef CONFIG_DPP2
 	wconf->dpp_pfs = conf->dpp_pfs;
 #endif /* CONFIG_DPP2 */
+#ifdef CONFIG_PASN
+#ifdef CONFIG_TESTING_OPTIONS
+	wconf->force_kdk_derivation = conf->force_kdk_derivation;
+#endif /* CONFIG_TESTING_OPTIONS */
+#endif /* CONFIG_PASN */
 }
 
 
@@ -914,6 +920,27 @@
 }
 
 
+#ifdef CONFIG_PASN
+
+static void hostapd_store_ptksa(void *ctx, const u8 *addr,int cipher,
+				u32 life_time, const struct wpa_ptk *ptk)
+{
+	struct hostapd_data *hapd = ctx;
+
+	ptksa_cache_add(hapd->ptksa, addr, cipher, life_time, ptk);
+}
+
+
+static void hostapd_clear_ptksa(void *ctx, const u8 *addr, int cipher)
+{
+	struct hostapd_data *hapd = ctx;
+
+	ptksa_cache_flush(hapd->ptksa, addr, cipher);
+}
+
+#endif /* CONFIG_PASN */
+
+
 static int hostapd_wpa_auth_update_vlan(void *ctx, const u8 *addr, int vlan_id)
 {
 #ifndef CONFIG_NO_VLAN
@@ -1439,6 +1466,11 @@
 		.send_oui = hostapd_wpa_auth_send_oui,
 		.channel_info = hostapd_channel_info,
 		.update_vlan = hostapd_wpa_auth_update_vlan,
+#ifdef CONFIG_PASN
+		.store_ptksa = hostapd_store_ptksa,
+		.clear_ptksa = hostapd_clear_ptksa,
+#endif /* CONFIG_PASN */
+
 #ifdef CONFIG_OCV
 		.get_sta_tx_params = hostapd_get_sta_tx_params,
 #endif /* CONFIG_OCV */
@@ -1482,6 +1514,22 @@
 	else
 		_conf.extended_key_id = 0;
 
+	if (!(hapd->iface->drv_flags & WPA_DRIVER_FLAGS_BEACON_PROTECTION))
+		_conf.beacon_prot = 0;
+
+#ifdef CONFIG_OCV
+	if (!(hapd->iface->drv_flags2 &
+	      (WPA_DRIVER_FLAGS2_AP_SME | WPA_DRIVER_FLAGS2_OCV)))
+		_conf.ocv = 0;
+#endif /* CONFIG_OCV */
+
+	_conf.secure_ltf =
+		!!(hapd->iface->drv_flags2 & WPA_DRIVER_FLAGS2_SEC_LTF);
+	_conf.secure_rtt =
+		!!(hapd->iface->drv_flags2 & WPA_DRIVER_FLAGS2_SEC_RTT);
+	_conf.prot_range_neg =
+		!!(hapd->iface->drv_flags2 & WPA_DRIVER_FLAGS2_PROT_RANGE_NEG);
+
 	hapd->wpa_auth = wpa_init(hapd->own_addr, &_conf, &cb, hapd);
 	if (hapd->wpa_auth == NULL) {
 		wpa_printf(MSG_ERROR, "WPA initialization failed.");
@@ -1507,6 +1555,12 @@
 		return -1;
 	}
 
+	hapd->ptksa = ptksa_cache_init();
+	if (!hapd->ptksa) {
+		wpa_printf(MSG_ERROR, "Failed to allocate PTKSA cache");
+		return -1;
+	}
+
 #ifdef CONFIG_IEEE80211R_AP
 	if (!hostapd_drv_none(hapd) &&
 	    wpa_key_mgmt_ft(hapd->conf->wpa_key_mgmt)) {
@@ -1546,6 +1600,9 @@
 void hostapd_deinit_wpa(struct hostapd_data *hapd)
 {
 	ieee80211_tkip_countermeasures_deinit(hapd);
+	ptksa_cache_deinit(hapd->ptksa);
+	hapd->ptksa = NULL;
+
 	rsn_preauth_iface_deinit(hapd);
 	if (hapd->wpa_auth) {
 		wpa_deinit(hapd->wpa_auth);
diff --git a/src/ap/wpa_auth_ie.c b/src/ap/wpa_auth_ie.c
index 3704fc0..d471031 100644
--- a/src/ap/wpa_auth_ie.c
+++ b/src/ap/wpa_auth_ie.c
@@ -88,13 +88,42 @@
 }
 
 
+static u16 wpa_own_rsn_capab(struct wpa_auth_config *conf)
+{
+	u16 capab = 0;
+
+	if (conf->rsn_preauth)
+		capab |= WPA_CAPABILITY_PREAUTH;
+	if (conf->wmm_enabled) {
+		/* 4 PTKSA replay counters when using WMM */
+		capab |= (RSN_NUM_REPLAY_COUNTERS_16 << 2);
+	}
+	if (conf->ieee80211w != NO_MGMT_FRAME_PROTECTION) {
+		capab |= WPA_CAPABILITY_MFPC;
+		if (conf->ieee80211w == MGMT_FRAME_PROTECTION_REQUIRED)
+			capab |= WPA_CAPABILITY_MFPR;
+	}
+#ifdef CONFIG_OCV
+	if (conf->ocv)
+		capab |= WPA_CAPABILITY_OCVC;
+#endif /* CONFIG_OCV */
+#ifdef CONFIG_RSN_TESTING
+	if (rsn_testing)
+		capab |= BIT(8) | BIT(15);
+#endif /* CONFIG_RSN_TESTING */
+	if (conf->extended_key_id)
+		capab |= WPA_CAPABILITY_EXT_KEY_ID_FOR_UNICAST;
+
+	return capab;
+}
+
+
 int wpa_write_rsn_ie(struct wpa_auth_config *conf, u8 *buf, size_t len,
 		     const u8 *pmkid)
 {
 	struct rsn_ie_hdr *hdr;
 	int num_suites, res;
 	u8 *pos, *count;
-	u16 capab;
 	u32 suite;
 
 	hdr = (struct rsn_ie_hdr *) buf;
@@ -260,6 +289,13 @@
 		num_suites++;
 	}
 #endif /* CONFIG_HS20 */
+#ifdef CONFIG_PASN
+	if (conf->wpa_key_mgmt & WPA_KEY_MGMT_PASN) {
+		RSN_SELECTOR_PUT(pos, RSN_AUTH_KEY_MGMT_PASN);
+		pos += RSN_SELECTOR_LEN;
+		num_suites++;
+	}
+#endif /* CONFIG_PASN */
 
 #ifdef CONFIG_RSN_TESTING
 	if (rsn_testing) {
@@ -277,29 +313,7 @@
 	WPA_PUT_LE16(count, num_suites);
 
 	/* RSN Capabilities */
-	capab = 0;
-	if (conf->rsn_preauth)
-		capab |= WPA_CAPABILITY_PREAUTH;
-	if (conf->wmm_enabled) {
-		/* 4 PTKSA replay counters when using WMM */
-		capab |= (RSN_NUM_REPLAY_COUNTERS_16 << 2);
-	}
-	if (conf->ieee80211w != NO_MGMT_FRAME_PROTECTION) {
-		capab |= WPA_CAPABILITY_MFPC;
-		if (conf->ieee80211w == MGMT_FRAME_PROTECTION_REQUIRED)
-			capab |= WPA_CAPABILITY_MFPR;
-	}
-#ifdef CONFIG_OCV
-	if (conf->ocv)
-		capab |= WPA_CAPABILITY_OCVC;
-#endif /* CONFIG_OCV */
-#ifdef CONFIG_RSN_TESTING
-	if (rsn_testing)
-		capab |= BIT(8) | BIT(15);
-#endif /* CONFIG_RSN_TESTING */
-	if (conf->extended_key_id)
-		capab |= WPA_CAPABILITY_EXT_KEY_ID_FOR_UNICAST;
-	WPA_PUT_LE16(pos, capab);
+	WPA_PUT_LE16(pos, wpa_own_rsn_capab(conf));
 	pos += 2;
 
 	if (pmkid) {
@@ -377,23 +391,38 @@
 int wpa_write_rsnxe(struct wpa_auth_config *conf, u8 *buf, size_t len)
 {
 	u8 *pos = buf;
+	u16 capab = 0;
+	size_t flen;
 
-	if (conf->sae_pwe != 1 && conf->sae_pwe != 2 && !conf->sae_pk)
+	if (wpa_key_mgmt_sae(conf->wpa_key_mgmt) &&
+	    (conf->sae_pwe == 1 || conf->sae_pwe == 2 || conf->sae_pk)) {
+		capab |= BIT(WLAN_RSNX_CAPAB_SAE_H2E);
+#ifdef CONFIG_SAE_PK
+		if (conf->sae_pk)
+			capab |= BIT(WLAN_RSNX_CAPAB_SAE_PK);
+#endif /* CONFIG_SAE_PK */
+	}
+
+	if (conf->secure_ltf)
+		capab |= BIT(WLAN_RSNX_CAPAB_SECURE_LTF);
+	if (conf->secure_rtt)
+		capab |= BIT(WLAN_RSNX_CAPAB_SECURE_RTT);
+	if (conf->prot_range_neg)
+		capab |= BIT(WLAN_RSNX_CAPAB_PROT_RANGE_NEG);
+
+	flen = (capab & 0xff00) ? 2 : 1;
+	if (!capab)
 		return 0; /* no supported extended RSN capabilities */
-
-	if (len < 3)
+	if (len < 2 + flen)
 		return -1;
+	capab |= flen - 1; /* bit 0-3 = Field length (n - 1) */
 
 	*pos++ = WLAN_EID_RSNX;
-	*pos++ = 1;
-	/* bits 0-3 = 0 since only one octet of Extended RSN Capabilities is
-	 * used for now */
-	*pos = BIT(WLAN_RSNX_CAPAB_SAE_H2E);
-#ifdef CONFIG_SAE_PK
-	if (conf->sae_pk)
-		*pos |= BIT(WLAN_RSNX_CAPAB_SAE_PK);
-#endif /* CONFIG_SAE_PK */
-	pos++;
+	*pos++ = flen;
+	*pos++ = capab & 0x00ff;
+	capab >>= 8;
+	if (capab)
+		*pos++ = capab;
 
 	return pos - buf;
 }
@@ -1096,6 +1125,7 @@
 
 
 #ifdef CONFIG_FILS
+
 u8 * wpa_auth_write_assoc_resp_fils(struct wpa_state_machine *sm,
 				    u8 *pos, size_t max_len,
 				    const u8 *req_ies, size_t req_ies_len)
@@ -1112,4 +1142,91 @@
 		return pos;
 	return pos + res;
 }
+
+
+bool wpa_auth_write_fd_rsn_info(struct wpa_authenticator *wpa_auth,
+				u8 *fd_rsn_info)
+{
+	struct wpa_auth_config *conf;
+	u32 selectors = 0;
+	u8 *pos = fd_rsn_info;
+	int i, res;
+	u32 cipher, suite, selector, mask;
+	u8 tmp[10 * RSN_SELECTOR_LEN];
+
+	if (!wpa_auth)
+		return false;
+	conf = &wpa_auth->conf;
+
+	if (!(conf->wpa & WPA_PROTO_RSN))
+		return false;
+
+	/* RSN Capability (B0..B15) */
+	WPA_PUT_LE16(pos, wpa_own_rsn_capab(conf));
+	pos += 2;
+
+	/* Group Data Cipher Suite Selector (B16..B21) */
+	suite = wpa_cipher_to_suite(WPA_PROTO_RSN, conf->wpa_group);
+	if (suite == RSN_CIPHER_SUITE_NO_GROUP_ADDRESSED)
+		cipher = 63; /* No cipher suite selected */
+	if ((suite >> 8) == 0x000fac && ((suite & 0xff) <= 13))
+		cipher = suite & 0xff;
+	else
+		cipher = 62; /* vendor specific */
+	selectors |= cipher;
+
+	/* Group Management Cipher Suite Selector (B22..B27) */
+	cipher = 63; /* Default to no cipher suite selected */
+	if (conf->ieee80211w != NO_MGMT_FRAME_PROTECTION) {
+		switch (conf->group_mgmt_cipher) {
+		case WPA_CIPHER_AES_128_CMAC:
+			cipher = RSN_CIPHER_SUITE_AES_128_CMAC & 0xff;
+			break;
+		case WPA_CIPHER_BIP_GMAC_128:
+			cipher = RSN_CIPHER_SUITE_BIP_GMAC_128 & 0xff;
+			break;
+		case WPA_CIPHER_BIP_GMAC_256:
+			cipher = RSN_CIPHER_SUITE_BIP_GMAC_256 & 0xff;
+			break;
+		case WPA_CIPHER_BIP_CMAC_256:
+			cipher = RSN_CIPHER_SUITE_BIP_CMAC_256 & 0xff;
+			break;
+		}
+	}
+	selectors |= cipher << 6;
+
+	/* Pairwise Cipher Suite Selector (B28..B33) */
+	cipher = 63; /* Default to no cipher suite selected */
+	res = rsn_cipher_put_suites(tmp, conf->rsn_pairwise);
+	if (res == 1 && tmp[0] == 0x00 && tmp[1] == 0x0f && tmp[2] == 0xac &&
+	    tmp[3] <= 13)
+		cipher = tmp[3];
+	selectors |= cipher << 12;
+
+	/* AKM Suite Selector (B34..B39) */
+	selector = 0; /* default to AKM from RSNE in Beacon/Probe Response */
+	mask = WPA_KEY_MGMT_FILS_SHA256 | WPA_KEY_MGMT_FILS_SHA384 |
+		WPA_KEY_MGMT_FT_FILS_SHA384;
+	if ((conf->wpa_key_mgmt & mask) && (conf->wpa_key_mgmt & ~mask) == 0) {
+		suite = conf->wpa_key_mgmt & mask;
+		if (suite == WPA_KEY_MGMT_FILS_SHA256)
+			selector = 1; /* 00-0f-ac:14 */
+		else if (suite == WPA_KEY_MGMT_FILS_SHA384)
+			selector = 2; /* 00-0f-ac:15 */
+		else if (suite == (WPA_KEY_MGMT_FILS_SHA256 |
+				   WPA_KEY_MGMT_FILS_SHA384))
+			selector = 3; /* 00-0f-ac:14 or 00-0f-ac:15 */
+		else if (suite == WPA_KEY_MGMT_FT_FILS_SHA384)
+			selector = 4; /* 00-0f-ac:17 */
+	}
+	selectors |= selector << 18;
+
+	for (i = 0; i < 3; i++) {
+		*pos++ = selectors & 0xff;
+		selectors >>= 8;
+	}
+
+	return true;
+}
+
 #endif /* CONFIG_FILS */
diff --git a/src/ap/wps_hostapd.c b/src/ap/wps_hostapd.c
index dc8aa8f..e97dbf9 100644
--- a/src/ap/wps_hostapd.c
+++ b/src/ap/wps_hostapd.c
@@ -1376,6 +1376,48 @@
 }
 
 
+static int hostapd_wps_update_multi_ap(struct hostapd_data *hapd,
+				       struct wps_registrar *reg)
+{
+	struct hostapd_bss_config *conf = hapd->conf;
+	u8 *multi_ap_backhaul_network_key = NULL;
+	size_t multi_ap_backhaul_network_key_len = 0;
+	int ret;
+
+	if (!(conf->multi_ap & FRONTHAUL_BSS) ||
+	    !conf->multi_ap_backhaul_ssid.ssid_len)
+		return 0;
+
+	if (conf->multi_ap_backhaul_ssid.wpa_passphrase) {
+		multi_ap_backhaul_network_key =
+			(u8 *) os_strdup(
+				conf->multi_ap_backhaul_ssid.wpa_passphrase);
+		if (!multi_ap_backhaul_network_key)
+			return -1;
+		multi_ap_backhaul_network_key_len =
+			os_strlen(conf->multi_ap_backhaul_ssid.wpa_passphrase);
+	} else if (conf->multi_ap_backhaul_ssid.wpa_psk) {
+		multi_ap_backhaul_network_key = os_malloc(2 * PMK_LEN + 1);
+		if (!multi_ap_backhaul_network_key)
+			return -1;
+		wpa_snprintf_hex((char *) multi_ap_backhaul_network_key,
+				 2 * PMK_LEN + 1,
+				 conf->multi_ap_backhaul_ssid.wpa_psk->psk,
+				 PMK_LEN);
+		multi_ap_backhaul_network_key_len = 2 * PMK_LEN;
+	}
+
+	ret = wps_registrar_update_multi_ap(
+		reg, conf->multi_ap_backhaul_ssid.ssid,
+		conf->multi_ap_backhaul_ssid.ssid_len,
+		multi_ap_backhaul_network_key,
+		multi_ap_backhaul_network_key_len);
+	os_free(multi_ap_backhaul_network_key);
+
+	return ret;
+}
+
+
 void hostapd_deinit_wps(struct hostapd_data *hapd)
 {
 	eloop_cancel_timeout(hostapd_wps_reenable_ap_pin, hapd, NULL);
@@ -1398,22 +1440,65 @@
 
 void hostapd_update_wps(struct hostapd_data *hapd)
 {
-	if (hapd->wps == NULL)
+	struct wps_context *wps = hapd->wps;
+	struct hostapd_bss_config *conf = hapd->conf;
+
+	if (!wps)
 		return;
 
 #ifdef CONFIG_WPS_UPNP
-	hapd->wps->friendly_name = hapd->conf->friendly_name;
-	hapd->wps->manufacturer_url = hapd->conf->manufacturer_url;
-	hapd->wps->model_description = hapd->conf->model_description;
-	hapd->wps->model_url = hapd->conf->model_url;
-	hapd->wps->upc = hapd->conf->upc;
+	wps->friendly_name = conf->friendly_name;
+	wps->manufacturer_url = conf->manufacturer_url;
+	wps->model_description = conf->model_description;
+	wps->model_url = conf->model_url;
+	wps->upc = conf->upc;
 #endif /* CONFIG_WPS_UPNP */
 
-	hostapd_wps_set_vendor_ext(hapd, hapd->wps);
-	hostapd_wps_set_application_ext(hapd, hapd->wps);
+	os_memcpy(wps->ssid, conf->ssid.ssid, conf->ssid.ssid_len);
+	wps->ssid_len = conf->ssid.ssid_len;
 
-	if (hapd->conf->wps_state)
-		wps_registrar_update_ie(hapd->wps->registrar);
+	/* Clear WPS settings, then fill them again */
+	os_free(wps->network_key);
+	wps->network_key = NULL;
+	wps->network_key_len = 0;
+	wps->psk_set = 0;
+	if (conf->ssid.wpa_psk_file) {
+		/* Use per-device PSKs */
+	} else if (conf->ssid.wpa_passphrase) {
+		wps->network_key = (u8 *) os_strdup(conf->ssid.wpa_passphrase);
+		if (!wps->network_key)
+			return;
+		wps->network_key_len = os_strlen(conf->ssid.wpa_passphrase);
+	} else if (conf->ssid.wpa_psk) {
+		wps->network_key = os_malloc(2 * PMK_LEN + 1);
+		if (!wps->network_key)
+			return;
+		wpa_snprintf_hex((char *) wps->network_key, 2 * PMK_LEN + 1,
+				 conf->ssid.wpa_psk->psk, PMK_LEN);
+		wps->network_key_len = 2 * PMK_LEN;
+#ifdef CONFIG_WEP
+	} else if (conf->ssid.wep.keys_set && conf->ssid.wep.key[0]) {
+		wps->network_key = os_malloc(conf->ssid.wep.len[0]);
+		if (!wps->network_key)
+			return;
+		os_memcpy(wps->network_key, conf->ssid.wep.key[0],
+			  conf->ssid.wep.len[0]);
+		wps->network_key_len = conf->ssid.wep.len[0];
+#endif /* CONFIG_WEP */
+	}
+
+	if (conf->ssid.wpa_psk) {
+		os_memcpy(wps->psk, conf->ssid.wpa_psk->psk, PMK_LEN);
+		wps->psk_set = 1;
+	}
+
+	hostapd_wps_update_multi_ap(hapd, wps->registrar);
+
+	hostapd_wps_set_vendor_ext(hapd, wps);
+	hostapd_wps_set_application_ext(hapd, wps);
+
+	if (conf->wps_state)
+		wps_registrar_update_ie(wps->registrar);
 	else
 		hostapd_deinit_wps(hapd);
 }
diff --git a/src/common/Makefile b/src/common/Makefile
index 59ba6c5..e2c5f03 100644
--- a/src/common/Makefile
+++ b/src/common/Makefile
@@ -3,12 +3,14 @@
 CFLAGS += -DCONFIG_SAE
 CFLAGS += -DCONFIG_SUITE
 CFLAGS += -DCONFIG_SUITEB
+CFLAGS += -DCONFIG_PTKSA_CACHE
 
 LIB_OBJS= \
 	gas.o \
 	hw_features_common.o \
 	ieee802_11_common.o \
 	sae.o \
+	ptksa_cache.o \
 	wpa_common.o
 
 include ../lib.rules
diff --git a/src/common/common_module_tests.c b/src/common/common_module_tests.c
index 00308d4..50ce192 100644
--- a/src/common/common_module_tests.c
+++ b/src/common/common_module_tests.c
@@ -637,6 +637,178 @@
 }
 
 
+#ifdef CONFIG_PASN
+
+static int pasn_test_pasn_auth(void)
+{
+	/* Test vector taken from IEEE P802.11az/D2.6, J.12 */
+	const u8 pmk[] = {
+		0xde, 0xf4, 0x3e, 0x55, 0x67, 0xe0, 0x1c, 0xa6,
+		0x64, 0x92, 0x65, 0xf1, 0x9a, 0x29, 0x0e, 0xef,
+		0xf8, 0xbd, 0x88, 0x8f, 0x6c, 0x1d, 0x9c, 0xc9,
+		0xd1, 0x0f, 0x04, 0xbd, 0x37, 0x8f, 0x3c, 0xad
+	};
+
+	const u8 spa_addr[] = {
+		0x00, 0x90, 0x4c, 0x01, 0xc1, 0x07
+	};
+	const u8 bssid[] = {
+		0xc0, 0xff, 0xd4, 0xa8, 0xdb, 0xc1
+	};
+	const u8 dhss[] = {
+		0xf8, 0x7b, 0x20, 0x8e, 0x7e, 0xd2, 0xb7, 0x37,
+		0xaf, 0xdb, 0xc2, 0xe1, 0x3e, 0xae, 0x78, 0xda,
+		0x30, 0x01, 0x23, 0xd4, 0xd8, 0x4b, 0xa8, 0xb0,
+		0xea, 0xfe, 0x90, 0xc4, 0x8c, 0xdf, 0x1f, 0x93
+	};
+	const u8 kck[] = {
+		0x7b, 0xb8, 0x21, 0xac, 0x0a, 0xa5, 0x90, 0x9d,
+		0xd6, 0x54, 0xa5, 0x60, 0x65, 0xad, 0x7c, 0x77,
+		0xeb, 0x88, 0x9c, 0xbe, 0x29, 0x05, 0xbb, 0xf0,
+		0x5a, 0xbb, 0x1e, 0xea, 0xc8, 0x8b, 0xa3, 0x06
+	};
+	const u8 tk[] = {
+		0x67, 0x3e, 0xab, 0x46, 0xb8, 0x32, 0xd5, 0xa8,
+		0x0c, 0xbc, 0x02, 0x43, 0x01, 0x6e, 0x20, 0x7e
+	};
+	const u8 kdk[] = {
+		0x2d, 0x0f, 0x0e, 0x82, 0xc7, 0x0d, 0xd2, 0x6b,
+		0x79, 0x06, 0x1a, 0x46, 0x81, 0xe8, 0xdb, 0xb2,
+		0xea, 0x83, 0xbe, 0xa3, 0x99, 0x84, 0x4b, 0xd5,
+		0x89, 0x4e, 0xb3, 0x20, 0xf6, 0x9d, 0x7d, 0xd6
+	};
+	struct wpa_ptk ptk;
+	int ret;
+
+	ret = pasn_pmk_to_ptk(pmk, sizeof(pmk),
+			      spa_addr, bssid,
+			      dhss, sizeof(dhss),
+			      &ptk, WPA_KEY_MGMT_PASN, WPA_CIPHER_CCMP,
+			      WPA_KDK_MAX_LEN);
+
+	if (ret)
+		return ret;
+
+	if (ptk.kck_len != sizeof(kck) ||
+	    os_memcmp(kck, ptk.kck, sizeof(kck)) != 0) {
+		wpa_printf(MSG_ERROR, "PASN: Mismatched KCK");
+		return -1;
+	}
+
+	if (ptk.tk_len != sizeof(tk) ||
+	    os_memcmp(tk, ptk.tk, sizeof(tk)) != 0) {
+		wpa_printf(MSG_ERROR, "PASN: Mismatched TK");
+		return -1;
+	}
+
+	if (ptk.kdk_len != sizeof(kdk) ||
+	    os_memcmp(kdk, ptk.kdk, sizeof(kdk)) != 0) {
+		wpa_printf(MSG_ERROR, "PASN: Mismatched KDK");
+		return -1;
+	}
+
+	return 0;
+}
+
+
+static int pasn_test_no_pasn_auth(void)
+{
+	/* Test vector taken from IEEE P802.11az/D2.6, J.13 */
+	const u8 pmk[] = {
+		0xde, 0xf4, 0x3e, 0x55, 0x67, 0xe0, 0x1c, 0xa6,
+		0x64, 0x92, 0x65, 0xf1, 0x9a, 0x29, 0x0e, 0xef,
+		0xf8, 0xbd, 0x88, 0x8f, 0x6c, 0x1d, 0x9c, 0xc9,
+		0xd1, 0x0f, 0x04, 0xbd, 0x37, 0x8f, 0x3c, 0xad
+	};
+	const u8 aa[] = {
+		0xc0, 0xff, 0xd4, 0xa8, 0xdb, 0xc1
+	};
+	const u8 spa[] = {
+		0x00, 0x90, 0x4c, 0x01, 0xc1, 0x07
+	};
+	const u8 anonce[] = {
+		0xbe, 0x7a, 0x1c, 0xa2, 0x84, 0x34, 0x7b, 0x5b,
+		0xd6, 0x7d, 0xbd, 0x2d, 0xfd, 0xb4, 0xd9, 0x9f,
+		0x1a, 0xfa, 0xe0, 0xb8, 0x8b, 0xa1, 0x8e, 0x00,
+		0x87, 0x18, 0x41, 0x7e, 0x4b, 0x27, 0xef, 0x5f
+	};
+	const u8 snonce[] = {
+		0x40, 0x4b, 0x01, 0x2f, 0xfb, 0x43, 0xed, 0x0f,
+		0xb4, 0x3e, 0xa1, 0xf2, 0x87, 0xc9, 0x1f, 0x25,
+		0x06, 0xd2, 0x1b, 0x4a, 0x92, 0xd7, 0x4b, 0x5e,
+		0xa5, 0x0c, 0x94, 0x33, 0x50, 0xce, 0x86, 0x71
+	};
+	const u8 kck[] = {
+		0xcd, 0x7b, 0x9e, 0x75, 0x55, 0x36, 0x2d, 0xf0,
+		0xb6, 0x35, 0x68, 0x48, 0x4a, 0x81, 0x12, 0xf5
+	};
+	const u8 kek[] = {
+		0x99, 0xca, 0xd3, 0x58, 0x8d, 0xa0, 0xf1, 0xe6,
+		0x3f, 0xd1, 0x90, 0x19, 0x10, 0x39, 0xbb, 0x4b
+	};
+	const u8 tk[] = {
+		0x9e, 0x2e, 0x93, 0x77, 0xe7, 0x53, 0x2e, 0x73,
+		0x7a, 0x1b, 0xc2, 0x50, 0xfe, 0x19, 0x4a, 0x03
+	};
+	const u8 kdk[] = {
+		0x6c, 0x7f, 0xb9, 0x7c, 0xeb, 0x55, 0xb0, 0x1a,
+		0xcf, 0xf0, 0x0f, 0x07, 0x09, 0x42, 0xbd, 0xf5,
+		0x29, 0x1f, 0xeb, 0x4b, 0xee, 0x38, 0xe0, 0x36,
+		0x5b, 0x25, 0xa2, 0x50, 0xbb, 0x2a, 0xc9, 0xff
+	};
+	struct wpa_ptk ptk;
+	int ret;
+
+	ret = wpa_pmk_to_ptk(pmk, sizeof(pmk),
+			     "Pairwise key expansion",
+			     spa, aa, snonce, anonce,
+			     &ptk, WPA_KEY_MGMT_SAE, WPA_CIPHER_CCMP,
+			     NULL, 0, WPA_KDK_MAX_LEN);
+
+	if (ret)
+		return ret;
+
+	if (ptk.kck_len != sizeof(kck) ||
+	    os_memcmp(kck, ptk.kck, sizeof(kck)) != 0) {
+		wpa_printf(MSG_ERROR, "KDK no PASN auth: Mismatched KCK");
+		return -1;
+	}
+
+	if (ptk.kek_len != sizeof(kek) ||
+	    os_memcmp(kek, ptk.kek, sizeof(kek)) != 0) {
+		wpa_printf(MSG_ERROR, "KDK no PASN auth: Mismatched KEK");
+		return -1;
+	}
+
+	if (ptk.tk_len != sizeof(tk) ||
+	    os_memcmp(tk, ptk.tk, sizeof(tk)) != 0) {
+		wpa_printf(MSG_ERROR, "KDK no PASN auth: Mismatched TK");
+		return -1;
+	}
+
+	if (ptk.kdk_len != sizeof(kdk) ||
+	    os_memcmp(kdk, ptk.kdk, sizeof(kdk)) != 0) {
+		wpa_printf(MSG_ERROR, "KDK no PASN auth: Mismatched KDK");
+		return -1;
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_PASN */
+
+
+static int pasn_tests(void)
+{
+#ifdef CONFIG_PASN
+	if (pasn_test_pasn_auth() ||
+	    pasn_test_no_pasn_auth())
+		return -1;
+#endif /* CONFIG_PASN */
+	return 0;
+}
+
+
 int common_module_tests(void)
 {
 	int ret = 0;
@@ -647,6 +819,7 @@
 	    gas_tests() < 0 ||
 	    sae_tests() < 0 ||
 	    sae_pk_tests() < 0 ||
+	    pasn_tests() < 0 ||
 	    rsn_ie_parse_tests() < 0)
 		ret = -1;
 
diff --git a/src/common/defs.h b/src/common/defs.h
index bbe3120..f43bdb5 100644
--- a/src/common/defs.h
+++ b/src/common/defs.h
@@ -49,6 +49,8 @@
 #define WPA_KEY_MGMT_OWE BIT(22)
 #define WPA_KEY_MGMT_DPP BIT(23)
 #define WPA_KEY_MGMT_FT_IEEE8021X_SHA384 BIT(24)
+#define WPA_KEY_MGMT_PASN BIT(25)
+
 
 #define WPA_KEY_MGMT_FT (WPA_KEY_MGMT_FT_PSK | \
 			 WPA_KEY_MGMT_FT_IEEE8021X | \
@@ -388,9 +390,10 @@
 };
 
 enum set_band {
-	WPA_SETBAND_AUTO,
-	WPA_SETBAND_5G,
-	WPA_SETBAND_2G
+	WPA_SETBAND_AUTO = 0,
+	WPA_SETBAND_5G = BIT(0),
+	WPA_SETBAND_2G = BIT(1),
+	WPA_SETBAND_6G = BIT(2),
 };
 
 enum wpa_radio_work_band {
@@ -402,7 +405,8 @@
 enum beacon_rate_type {
 	BEACON_RATE_LEGACY,
 	BEACON_RATE_HT,
-	BEACON_RATE_VHT
+	BEACON_RATE_VHT,
+	BEACON_RATE_HE
 };
 
 enum eap_proxy_sim_state {
diff --git a/src/common/dpp.c b/src/common/dpp.c
index 67b8f07..e8697c5 100644
--- a/src/common/dpp.c
+++ b/src/common/dpp.c
@@ -4195,7 +4195,7 @@
 	}
 
 	if (ppkey) {
-		pp_key_len = os_strlen(key) / 2;
+		pp_key_len = os_strlen(ppkey) / 2;
 		pp_key = os_malloc(pp_key_len);
 		if (!pp_key ||
 		    hexstr2bin(ppkey, pp_key, pp_key_len) < 0)
diff --git a/src/common/dpp.h b/src/common/dpp.h
index 99a1ca7..6e397c3 100644
--- a/src/common/dpp.h
+++ b/src/common/dpp.h
@@ -35,7 +35,7 @@
 #endif /* CONFIG_TESTING_OPTIONS */
 
 #define DPP_HDR_LEN (4 + 2) /* OUI, OUI Type, Crypto Suite, DPP frame type */
-#define DPP_TCP_PORT 7871
+#define DPP_TCP_PORT 8908
 
 enum dpp_public_action_frame_type {
 	DPP_PA_AUTHENTICATION_REQ = 0,
@@ -349,6 +349,7 @@
 	struct wpabuf *cacert;
 	struct wpabuf *certbag;
 	void *cert_resp_ctx;
+	void *gas_server_ctx;
 #ifdef CONFIG_TESTING_OPTIONS
 	char *config_obj_override;
 	char *discovery_override;
diff --git a/src/common/dpp_auth.c b/src/common/dpp_auth.c
index f79cfef..0cabd64 100644
--- a/src/common/dpp_auth.c
+++ b/src/common/dpp_auth.c
@@ -251,6 +251,7 @@
 	u8 *attr_start, *attr_end, *pos;
 
 	auth->waiting_auth_conf = 1;
+	auth->auth_resp_status = status;
 	auth->auth_resp_tries = 0;
 
 	/* Build DPP Authentication Response frame attributes */
diff --git a/src/common/dpp_crypto.c b/src/common/dpp_crypto.c
index 7c48015..c75fc78 100644
--- a/src/common/dpp_crypto.c
+++ b/src/common/dpp_crypto.c
@@ -2305,13 +2305,15 @@
 	/* M = { cR + pR } * CI */
 	cR = EVP_PKEY_get0_EC_KEY(own_key);
 	pR = EVP_PKEY_get0_EC_KEY(auth->own_protocol_key);
+	if (!pR)
+		goto fail;
 	group = EC_KEY_get0_group(pR);
 	bnctx = BN_CTX_new();
 	sum = BN_new();
 	mx = BN_new();
 	q = BN_new();
 	m = EC_POINT_new(group);
-	if (!cR || !pR || !bnctx || !sum || !mx || !q || !m)
+	if (!cR || !bnctx || !sum || !mx || !q || !m)
 		goto fail;
 	cR_bn = EC_KEY_get0_private_key(cR);
 	pR_bn = EC_KEY_get0_private_key(pR);
@@ -2866,6 +2868,7 @@
 	res = BIO_read(out, wpabuf_put(pem, 0), rlen);
 	if (res <= 0) {
 		wpabuf_free(pem);
+		pem = NULL;
 		goto fail;
 	}
 	wpabuf_put(pem, res);
diff --git a/src/common/dpp_tcp.c b/src/common/dpp_tcp.c
index 7e330d6..609c243 100644
--- a/src/common/dpp_tcp.c
+++ b/src/common/dpp_tcp.c
@@ -1279,7 +1279,7 @@
 	const u8 *pos, *end, *next, *adv_proto;
 	u16 status, slen, comeback_delay;
 
-	if (len < 5 + 2 + (comeback ? 1 : 0))
+	if (len < (size_t) (5 + 2 + (comeback ? 1 : 0)))
 		return -1;
 
 	wpa_printf(MSG_DEBUG,
diff --git a/src/common/gas_server.c b/src/common/gas_server.c
index c000aeb..5f44ffe 100644
--- a/src/common/gas_server.c
+++ b/src/common/gas_server.c
@@ -489,6 +489,21 @@
 }
 
 
+bool gas_server_response_sent(struct gas_server *gas, void *resp_ctx)
+{
+	struct gas_server_response *tmp;
+
+	dl_list_for_each(tmp, &gas->responses, struct gas_server_response,
+			 list) {
+		if (tmp == resp_ctx)
+			return tmp->resp &&
+				tmp->offset == wpabuf_len(tmp->resp);
+	}
+
+	return false;
+}
+
+
 struct gas_server * gas_server_init(void *ctx,
 				    void (*tx)(void *ctx, int freq,
 					       const u8 *da,
diff --git a/src/common/gas_server.h b/src/common/gas_server.h
index 2611dde..db00f87 100644
--- a/src/common/gas_server.h
+++ b/src/common/gas_server.h
@@ -36,6 +36,7 @@
 			  size_t data_len, int ack);
 int gas_server_set_resp(struct gas_server *gas, void *resp_ctx,
 			struct wpabuf *resp);
+bool gas_server_response_sent(struct gas_server *gas, void *resp_ctx);
 
 #else /* CONFIG_GAS_SERVER */
 
diff --git a/src/common/hw_features_common.c b/src/common/hw_features_common.c
index 511e68f..b8b886f 100644
--- a/src/common/hw_features_common.c
+++ b/src/common/hw_features_common.c
@@ -41,10 +41,30 @@
 
 
 struct hostapd_channel_data *
+hw_mode_get_channel(struct hostapd_hw_modes *mode, int freq, int *chan)
+{
+	int i;
+
+	for (i = 0; i < mode->num_channels; i++) {
+		struct hostapd_channel_data *ch = &mode->channels[i];
+
+		if (ch->freq == freq) {
+			if (chan)
+				*chan = ch->chan;
+			return ch;
+		}
+	}
+
+	return NULL;
+}
+
+
+struct hostapd_channel_data *
 hw_get_channel_freq(enum hostapd_hw_mode mode, int freq, int *chan,
 		    struct hostapd_hw_modes *hw_features, int num_hw_features)
 {
-	int i, j;
+	struct hostapd_channel_data *chan_data;
+	int i;
 
 	if (chan)
 		*chan = 0;
@@ -52,21 +72,15 @@
 	if (!hw_features)
 		return NULL;
 
-	for (j = 0; j < num_hw_features; j++) {
-		struct hostapd_hw_modes *curr_mode = &hw_features[j];
+	for (i = 0; i < num_hw_features; i++) {
+		struct hostapd_hw_modes *curr_mode = &hw_features[i];
 
 		if (curr_mode->mode != mode)
 			continue;
-		for (i = 0; i < curr_mode->num_channels; i++) {
-			struct hostapd_channel_data *ch =
-				&curr_mode->channels[i];
 
-			if (ch->freq == freq) {
-				if (chan)
-					*chan = ch->chan;
-				return ch;
-			}
-		}
+		chan_data = hw_mode_get_channel(curr_mode, freq, chan);
+		if (chan_data)
+			return chan_data;
 	}
 
 	return NULL;
@@ -580,6 +594,8 @@
 				center_segment0 = 138;
 			else if (channel <= 161)
 				center_segment0 = 155;
+			else if (channel <= 177)
+				center_segment0 = 171;
 			data->center_freq1 = 5000 + center_segment0 * 5;
 		} else {
 			/*
diff --git a/src/common/hw_features_common.h b/src/common/hw_features_common.h
index e57a8d6..ddde36b 100644
--- a/src/common/hw_features_common.h
+++ b/src/common/hw_features_common.h
@@ -15,6 +15,9 @@
 struct hostapd_channel_data * hw_get_channel_chan(struct hostapd_hw_modes *mode,
 						  int chan, int *freq);
 struct hostapd_channel_data *
+hw_mode_get_channel(struct hostapd_hw_modes *mode, int freq, int *chan);
+
+struct hostapd_channel_data *
 hw_get_channel_freq(enum hostapd_hw_mode mode, int freq, int *chan,
 		    struct hostapd_hw_modes *hw_features, int num_hw_features);
 
diff --git a/src/common/ieee802_11_common.c b/src/common/ieee802_11_common.c
index 72d7dda..fa39761 100644
--- a/src/common/ieee802_11_common.c
+++ b/src/common/ieee802_11_common.c
@@ -307,6 +307,10 @@
 			break;
 		elems->he_6ghz_band_cap = pos;
 		break;
+	case WLAN_EID_EXT_PASN_PARAMS:
+		elems->pasn_params = pos;
+		elems->pasn_params_len = elen;
+		break;
 	default:
 		if (show_errors) {
 			wpa_printf(MSG_MSGDUMP,
@@ -570,6 +574,11 @@
 			elems->dils = pos;
 			elems->dils_len = elen;
 			break;
+		case WLAN_EID_S1G_CAPABILITIES:
+			if (elen < 15)
+				break;
+			elems->s1g_capab = pos;
+			break;
 		case WLAN_EID_FRAGMENT:
 			ieee802_11_parse_fragment(&elems->frag_ies, pos, elen);
 			break;
@@ -876,7 +885,7 @@
 
 /**
  * ieee80211_freq_to_channel_ext - Convert frequency into channel info
- * for HT40 and VHT. DFS channels are not covered.
+ * for HT40, VHT, and HE. DFS channels are not covered.
  * @freq: Frequency (MHz) to convert
  * @sec_channel: 0 = non-HT40, 1 = sec. channel above, -1 = sec. channel below
  * @chanwidth: VHT/EDMG channel width (CHANWIDTH_*)
@@ -987,8 +996,8 @@
 		return HOSTAPD_MODE_IEEE80211A;
 	}
 
-	/* 5 GHz, channels 149..169 */
-	if (freq >= 5745 && freq <= 5845) {
+	/* 5 GHz, channels 149..177 */
+	if (freq >= 5745 && freq <= 5885) {
 		if ((freq - 5000) % 5)
 			return NUM_HOSTAPD_MODES;
 
@@ -1036,15 +1045,28 @@
 	}
 
 	if (freq > 5950 && freq <= 7115) {
-		int bw;
-		u8 idx = (freq - 5950) / 5;
-
-		bw = center_idx_to_bw_6ghz(idx);
-		if (bw < 0)
+		if ((freq - 5950) % 5)
 			return NUM_HOSTAPD_MODES;
 
-		*channel = idx;
-		*op_class = 131 + bw;
+		switch (chanwidth) {
+		case CHANWIDTH_80MHZ:
+			*op_class = 133;
+			break;
+		case CHANWIDTH_160MHZ:
+			*op_class = 134;
+			break;
+		case CHANWIDTH_80P80MHZ:
+			*op_class = 135;
+			break;
+		default:
+			if (sec_channel)
+				*op_class = 132;
+			else
+				*op_class = 131;
+			break;
+		}
+
+		*channel = (freq - 5950) / 5;
 		return HOSTAPD_MODE_IEEE80211A;
 	}
 
@@ -1405,22 +1427,22 @@
 			return -1;
 		return 5000 + 5 * chan;
 	case 124: /* channels 149,153,157,161 */
-	case 126: /* channels 149,157; 40 MHz */
-	case 127: /* channels 153,161; 40 MHz */
 		if (chan < 149 || chan > 161)
 			return -1;
 		return 5000 + 5 * chan;
-	case 125: /* channels 149,153,157,161,165,169 */
-		if (chan < 149 || chan > 169)
+	case 125: /* channels 149,153,157,161,165,169,173,177 */
+	case 126: /* channels 149,157,165,173; 40 MHz */
+	case 127: /* channels 153,161,169,177; 40 MHz */
+		if (chan < 149 || chan > 177)
 			return -1;
 		return 5000 + 5 * chan;
-	case 128: /* center freqs 42, 58, 106, 122, 138, 155; 80 MHz */
-	case 130: /* center freqs 42, 58, 106, 122, 138, 155; 80 MHz */
-		if (chan < 36 || chan > 161)
+	case 128: /* center freqs 42, 58, 106, 122, 138, 155, 171; 80 MHz */
+	case 130: /* center freqs 42, 58, 106, 122, 138, 155, 171; 80 MHz */
+		if (chan < 36 || chan > 177)
 			return -1;
 		return 5000 + 5 * chan;
-	case 129: /* center freqs 50, 114; 160 MHz */
-		if (chan < 36 || chan > 128)
+	case 129: /* center freqs 50, 114, 163; 160 MHz */
+		if (chan < 36 || chan > 177)
 			return -1;
 		return 5000 + 5 * chan;
 	case 131: /* UHB channels, 20 MHz: 1, 5, 9.. */
@@ -1865,21 +1887,26 @@
 	{ HOSTAPD_MODE_IEEE80211A, 122, 100, 132, 8, BW40PLUS, NO_P2P_SUPP },
 	{ HOSTAPD_MODE_IEEE80211A, 123, 104, 136, 8, BW40MINUS, NO_P2P_SUPP },
 	{ HOSTAPD_MODE_IEEE80211A, 124, 149, 161, 4, BW20, P2P_SUPP },
-	{ HOSTAPD_MODE_IEEE80211A, 125, 149, 169, 4, BW20, P2P_SUPP },
-	{ HOSTAPD_MODE_IEEE80211A, 126, 149, 157, 8, BW40PLUS, P2P_SUPP },
-	{ HOSTAPD_MODE_IEEE80211A, 127, 153, 161, 8, BW40MINUS, P2P_SUPP },
+	{ HOSTAPD_MODE_IEEE80211A, 125, 149, 177, 4, BW20, P2P_SUPP },
+	{ HOSTAPD_MODE_IEEE80211A, 126, 149, 173, 8, BW40PLUS, P2P_SUPP },
+	{ HOSTAPD_MODE_IEEE80211A, 127, 153, 177, 8, BW40MINUS, P2P_SUPP },
 
 	/*
-	 * IEEE P802.11ac/D7.0 Table E-4 actually talks about channel center
-	 * frequency index 42, 58, 106, 122, 138, 155 with channel spacing of
-	 * 80 MHz, but currently use the following definition for simplicity
+	 * IEEE P802.11ax/D8.0 Table E-4 actually talks about channel center
+	 * frequency index 42, 58, 106, 122, 138, 155, 171 with channel spacing
+	 * of 80 MHz, but currently use the following definition for simplicity
 	 * (these center frequencies are not actual channels, which makes
-	 * wpas_p2p_allow_channel() fail). wpas_p2p_verify_80mhz() should take
+	 * wpas_p2p_verify_channel() fail). wpas_p2p_verify_80mhz() should take
 	 * care of removing invalid channels.
 	 */
-	{ HOSTAPD_MODE_IEEE80211A, 128, 36, 161, 4, BW80, P2P_SUPP },
-	{ HOSTAPD_MODE_IEEE80211A, 129, 50, 114, 16, BW160, P2P_SUPP },
-	{ HOSTAPD_MODE_IEEE80211A, 131, 1, 233, 4, BW20, P2P_SUPP },
+	{ HOSTAPD_MODE_IEEE80211A, 128, 36, 177, 4, BW80, P2P_SUPP },
+	{ HOSTAPD_MODE_IEEE80211A, 129, 36, 177, 4, BW160, P2P_SUPP },
+	{ HOSTAPD_MODE_IEEE80211A, 131, 1, 233, 4, BW20, NO_P2P_SUPP },
+	{ HOSTAPD_MODE_IEEE80211A, 132, 1, 233, 8, BW40, NO_P2P_SUPP },
+	{ HOSTAPD_MODE_IEEE80211A, 133, 1, 233, 16, BW80, NO_P2P_SUPP },
+	{ HOSTAPD_MODE_IEEE80211A, 134, 1, 233, 32, BW160, NO_P2P_SUPP },
+	{ HOSTAPD_MODE_IEEE80211A, 135, 1, 233, 16, BW80P80, NO_P2P_SUPP },
+	{ HOSTAPD_MODE_IEEE80211A, 136, 2, 2, 4, BW20, NO_P2P_SUPP },
 
 	/*
 	 * IEEE Std 802.11ad-2012 and P802.ay/D5.0 60 GHz operating classes.
@@ -1895,7 +1922,7 @@
 	 * the OneHundredAndThirty Delimiter value used in the Supported
 	 * Operating Classes element to indicate the end of the Operating
 	 * Classes field. */
-	{ HOSTAPD_MODE_IEEE80211A, 130, 36, 161, 4, BW80P80, P2P_SUPP },
+	{ HOSTAPD_MODE_IEEE80211A, 130, 36, 177, 4, BW80P80, P2P_SUPP },
 	{ -1, 0, 0, 0, 0, BW20, NO_P2P_SUPP }
 };
 
@@ -2193,6 +2220,7 @@
 	switch (map->bw) {
 	case BW20:
 		return 20;
+	case BW40:
 	case BW40PLUS:
 	case BW40MINUS:
 		return 40;
@@ -2228,44 +2256,44 @@
 }
 
 
-int is_6ghz_freq(int freq)
+bool is_6ghz_freq(int freq)
 {
 	if (freq < 5935 || freq > 7115)
-		return 0;
+		return false;
 
 	if (freq == 5935)
-		return 1;
+		return true;
 
 	if (center_idx_to_bw_6ghz((freq - 5950) / 5) < 0)
-		return 0;
+		return false;
 
-	return 1;
+	return true;
 }
 
 
-int is_6ghz_op_class(u8 op_class)
+bool is_6ghz_op_class(u8 op_class)
 {
 	return op_class >= 131 && op_class <= 136;
 }
 
 
-int is_6ghz_psc_frequency(int freq)
+bool is_6ghz_psc_frequency(int freq)
 {
 	int i;
 
 	if (!is_6ghz_freq(freq) || freq == 5935)
-		return 0;
+		return false;
 	if ((((freq - 5950) / 5) & 0x3) != 0x1)
-		return 0;
+		return false;
 
 	i = (freq - 5950 + 55) % 80;
 	if (i == 0)
 		i = (freq - 5950 + 55) / 80;
 
 	if (i >= 1 && i <= 15)
-		return 1;
+		return true;
 
-	return 0;
+	return false;
 }
 
 
@@ -2476,16 +2504,16 @@
 	case 123: /* channels 104-136; 40 MHz */
 		return 40;
 	case 124: /* channels 149,153,157,161 */
-	case 125: /* channels 149,153,157,161,165,169 */
+	case 125: /* channels 149,153,157,161,165,169,173,177 */
 		return 20;
-	case 126: /* channels 149,157; 40 MHz */
-	case 127: /* channels 153,161; 40 MHz */
+	case 126: /* channels 149,157,161,165,169,173; 40 MHz */
+	case 127: /* channels 153..177; 40 MHz */
 		return 40;
-	case 128: /* center freqs 42, 58, 106, 122, 138, 155; 80 MHz */
+	case 128: /* center freqs 42, 58, 106, 122, 138, 155, 171; 80 MHz */
 		return 80;
-	case 129: /* center freqs 50, 114; 160 MHz */
+	case 129: /* center freqs 50, 114, 163; 160 MHz */
 		return 160;
-	case 130: /* center freqs 42, 58, 106, 122, 138, 155; 80+80 MHz */
+	case 130: /* center freqs 42, 58, 106, 122, 138, 155, 171; 80+80 MHz */
 		return 80;
 	case 131: /* UHB channels, 20 MHz: 1, 5, 9.. */
 		return 20;
@@ -2537,16 +2565,16 @@
 	case 123: /* channels 104-136; 40 MHz */
 		return CHANWIDTH_USE_HT;
 	case 124: /* channels 149,153,157,161 */
-	case 125: /* channels 149,153,157,161,165,169 */
+	case 125: /* channels 149,153,157,161,165,169,171 */
 		return CHANWIDTH_USE_HT;
-	case 126: /* channels 149,157; 40 MHz */
-	case 127: /* channels 153,161; 40 MHz */
+	case 126: /* channels 149,157,165, 173; 40 MHz */
+	case 127: /* channels 153,161,169,177; 40 MHz */
 		return CHANWIDTH_USE_HT;
-	case 128: /* center freqs 42, 58, 106, 122, 138, 155; 80 MHz */
+	case 128: /* center freqs 42, 58, 106, 122, 138, 155, 171; 80 MHz */
 		return CHANWIDTH_80MHZ;
-	case 129: /* center freqs 50, 114; 160 MHz */
+	case 129: /* center freqs 50, 114, 163; 160 MHz */
 		return CHANWIDTH_160MHZ;
-	case 130: /* center freqs 42, 58, 106, 122, 138, 155; 80+80 MHz */
+	case 130: /* center freqs 42, 58, 106, 122, 138, 155, 171; 80+80 MHz */
 		return CHANWIDTH_80P80MHZ;
 	case 131: /* UHB channels, 20 MHz: 1, 5, 9.. */
 		return CHANWIDTH_USE_HT;
diff --git a/src/common/ieee802_11_common.h b/src/common/ieee802_11_common.h
index 98a55ec..e4992b3 100644
--- a/src/common/ieee802_11_common.h
+++ b/src/common/ieee802_11_common.h
@@ -115,6 +115,8 @@
 	const u8 *short_ssid_list;
 	const u8 *he_6ghz_band_cap;
 	const u8 *sae_pk;
+	const u8 *s1g_capab;
+	const u8 *pasn_params;
 
 	u8 ssid_len;
 	u8 supp_rates_len;
@@ -168,6 +170,7 @@
 	u8 he_operation_len;
 	u8 short_ssid_list_len;
 	u8 sae_pk_len;
+	u8 pasn_params_len;
 
 	struct mb_ies_info mb_ies;
 	struct frag_ies_info frag_ies;
@@ -232,8 +235,8 @@
 	u8 min_chan;
 	u8 max_chan;
 	u8 inc;
-	enum { BW20, BW40PLUS, BW40MINUS, BW80, BW2160, BW160, BW80P80, BW4320,
-	       BW6480, BW8640} bw;
+	enum { BW20, BW40PLUS, BW40MINUS, BW40, BW80, BW2160, BW160, BW80P80,
+	       BW4320, BW6480, BW8640} bw;
 	enum { P2P_SUPP, NO_P2P_SUPP } p2p;
 };
 
@@ -258,9 +261,9 @@
 const struct oper_class_map * get_oper_class(const char *country, u8 op_class);
 int oper_class_bw_to_int(const struct oper_class_map *map);
 int center_idx_to_bw_6ghz(u8 idx);
-int is_6ghz_freq(int freq);
-int is_6ghz_op_class(u8 op_class);
-int is_6ghz_psc_frequency(int freq);
+bool is_6ghz_freq(int freq);
+bool is_6ghz_op_class(u8 op_class);
+bool is_6ghz_psc_frequency(int freq);
 
 int ieee802_11_parse_candidate_list(const char *pos, u8 *nei_rep,
 				    size_t nei_rep_len);
diff --git a/src/common/ieee802_11_defs.h b/src/common/ieee802_11_defs.h
index de41d7f..c385923 100644
--- a/src/common/ieee802_11_defs.h
+++ b/src/common/ieee802_11_defs.h
@@ -50,6 +50,7 @@
 #define WLAN_FC_STYPE_AUTH		11
 #define WLAN_FC_STYPE_DEAUTH		12
 #define WLAN_FC_STYPE_ACTION		13
+#define WLAN_FC_STYPE_ACTION_NO_ACK	14
 
 /* control */
 #define WLAN_FC_STYPE_PSPOLL		10
@@ -84,6 +85,7 @@
 #define WLAN_AUTH_FILS_SK		4
 #define WLAN_AUTH_FILS_SK_PFS		5
 #define WLAN_AUTH_FILS_PK		6
+#define WLAN_AUTH_PASN			7
 #define WLAN_AUTH_LEAP			128
 
 #define WLAN_AUTH_CHALLENGE_LEN 128
@@ -432,7 +434,7 @@
 #define WLAN_EID_VHT_OPERATION 192
 #define WLAN_EID_VHT_EXTENDED_BSS_LOAD 193
 #define WLAN_EID_VHT_WIDE_BW_CHSWITCH  194
-#define WLAN_EID_VHT_TRANSMIT_POWER_ENVELOPE 195
+#define WLAN_EID_TRANSMIT_POWER_ENVELOPE 195
 #define WLAN_EID_VHT_CHANNEL_SWITCH_WRAPPER 196
 #define WLAN_EID_VHT_AID 197
 #define WLAN_EID_VHT_QUIET_CHANNEL 198
@@ -443,7 +445,10 @@
 #define WLAN_EID_DEVICE_LOCATION 204
 #define WLAN_EID_WHITE_SPACE_MAP 205
 #define WLAN_EID_FTM_PARAMETERS 206
+#define WLAN_EID_S1G_BCN_COMPAT 213
+#define WLAN_EID_S1G_CAPABILITIES 217
 #define WLAN_EID_VENDOR_SPECIFIC 221
+#define WLAN_EID_S1G_OPERATION 232
 #define WLAN_EID_CAG_NUMBER 237
 #define WLAN_EID_AP_CSN 239
 #define WLAN_EID_FILS_INDICATION 240
@@ -482,6 +487,7 @@
 #define WLAN_EID_EXT_TCLAS_MASK 89
 #define WLAN_EID_EXT_REJECTED_GROUPS 92
 #define WLAN_EID_EXT_ANTI_CLOGGING_TOKEN 93
+#define WLAN_EID_EXT_PASN_PARAMS 100
 
 /* Extended Capabilities field */
 #define WLAN_EXT_CAPAB_20_40_COEX 0
@@ -525,7 +531,6 @@
 #define WLAN_EXT_CAPAB_TDLS_PROHIBITED 38
 #define WLAN_EXT_CAPAB_TDLS_CHANNEL_SWITCH_PROHIBITED 39
 #define WLAN_EXT_CAPAB_REJECT_UNADMITTED_FRAME 40
-#define WLAN_EXT_CAPAB_
 /* 41-43 - Service Interval Granularity */
 #define WLAN_EXT_CAPAB_IDENTIFIER_LOCATION 44
 #define WLAN_EXT_CAPAB_U_APSD_COEX 45
@@ -546,7 +551,6 @@
 #define WLAN_EXT_CAPAB_PROT_QLOAD_REPORT 60
 #define WLAN_EXT_CAPAB_TDLS_WIDER_BW 61
 #define WLAN_EXT_CAPAB_OPMODE_NOTIF 62
-#define WLAN_EXT_CAPAB_
 /* 63-64 - Max Number of MSDUs In A-MSDU */
 #define WLAN_EXT_CAPAB_CHANNEL_SCHEDULE_MGMT 65
 #define WLAN_EXT_CAPAB_GEODB_INBAND_ENABLING_SIGNAL 66
@@ -572,6 +576,9 @@
 #define WLAN_RSNX_CAPAB_PROTECTED_TWT 4
 #define WLAN_RSNX_CAPAB_SAE_H2E 5
 #define WLAN_RSNX_CAPAB_SAE_PK 6
+#define WLAN_RSNX_CAPAB_SECURE_LTF 8
+#define WLAN_RSNX_CAPAB_SECURE_RTT 9
+#define WLAN_RSNX_CAPAB_PROT_RANGE_NEG 10
 
 /* Action frame categories (IEEE Std 802.11-2016, 9.4.1.11, Table 9-76) */
 #define WLAN_ACTION_SPECTRUM_MGMT 0
@@ -597,6 +604,7 @@
 #define WLAN_ACTION_UNPROTECTED_DMG 20
 #define WLAN_ACTION_VHT 21
 #define WLAN_ACTION_FILS 26
+#define WLAN_ACTION_PROTECTED_FTM 34
 #define WLAN_ACTION_VENDOR_SPECIFIC_PROTECTED 126
 #define WLAN_ACTION_VENDOR_SPECIFIC 127
 /* Note: 128-255 used to report errors by setting category | 0x80 */
@@ -637,6 +645,7 @@
 #define WLAN_PA_FTM_REQUEST 32
 #define WLAN_PA_FTM 33
 #define WLAN_PA_FILS_DISCOVERY 34
+#define WLAN_PA_LOCATION_MEASUREMENT_REPORT 47
 
 /* Protected Dual of Public Action frames (IEEE Std 802.11-2016, 9.6.11,
  * Table 9-332) */
@@ -694,6 +703,11 @@
 #define WLAN_RRM_NEIGHBOR_REPORT_REQUEST 4
 #define WLAN_RRM_NEIGHBOR_REPORT_RESPONSE 5
 
+/* Protected Fine Timing Frame Action Field value */
+#define WLAN_PROT_FTM_REQUEST 1
+#define WLAN_PROT_FTM 2
+#define WLAN_PROT_FTM_REPORT 3
+
 /* Radio Measurement capabilities (from RM Enabled Capabilities element)
  * IEEE Std 802.11-2016, 9.4.2.45, Table 9-157 */
 /* byte 1 (out of 5) */
@@ -2392,4 +2406,51 @@
 	MCSC_SUBELEM_STATUS = 1,
 };
 
+/*
+ * IEEE Std 802.11ai-2016, 9.6.8.36 FILS Discovery frame format,
+ * Figure 9-687b - FILS Discovery Frame Control subfield format
+ */
+#define FD_FRAME_CTL_CAP_PRESENT			((u16) BIT(5))
+#define FD_FRAME_CTL_SHORT_SSID_PRESENT			((u16) BIT(6))
+#define FD_FRAME_CTL_AP_CSN_PRESENT			((u16) BIT(7))
+#define FD_FRAME_CTL_ANO_PRESENT			((u16) BIT(8))
+#define FD_FRAME_CTL_FREQ_SEG1_PRESENT			((u16) BIT(9))
+#define FD_FRAME_CTL_PRI_CHAN_PRESENT			((u16) BIT(10))
+#define FD_FRAME_CTL_RSN_INFO_PRESENT			((u16) BIT(11))
+#define FD_FRAME_CTL_LENGTH_PRESENT			((u16) BIT(12))
+#define FD_FRAME_CTL_MD_PRESENT				((u16) BIT(13))
+
+/*
+ * IEEE Std 802.11ai-2016, 9.6.8.36 FILS Discovery frame format,
+ * Figure 9-687c - FD Capability subfield format
+ */
+#define FD_CAP_ESS					BIT(0)
+#define FD_CAP_PRIVACY					BIT(1)
+#define FD_CAP_MULTI_BSSID_PRESENT			BIT(9)
+
+#define FD_CAP_BSS_CHWIDTH_20				0
+#define FD_CAP_BSS_CHWIDTH_40				1
+#define FD_CAP_BSS_CHWIDTH_80				2
+#define FD_CAP_BSS_CHWIDTH_160_80_80			3
+#define FD_CAP_BSS_CHWIDTH_SHIFT			2
+
+#define FD_CAP_NSS_1					0
+#define FD_CAP_NSS_2					1
+#define FD_CAP_NSS_3					2
+#define FD_CAP_NSS_4					3
+#define FD_CAP_NSS_5_8					4
+#define FD_CAP_NSS_SHIFT				5
+
+#define FD_CAP_PHY_INDEX_HR_DSSS			0
+#define FD_CAP_PHY_INDEX_ERP_OFDM			1
+#define FD_CAP_PHY_INDEX_HT				2
+#define FD_CAP_PHY_INDEX_VHT				3
+#define FD_CAP_PHY_INDEX_HE				4 /* P802.11ax */
+#define FD_CAP_PHY_INDEX_SHIFT				10
+
+/*
+ * IEEE P802.11ax/D8.0 26.17.2.3.2, AP behavior for fast passive scanning
+ */
+#define FD_MAX_INTERVAL_6GHZ                  20 /* TUs */
+
 #endif /* IEEE802_11_DEFS_H */
diff --git a/src/common/ocv.c b/src/common/ocv.c
index 4bc2749..c9dc14f 100644
--- a/src/common/ocv.c
+++ b/src/common/ocv.c
@@ -45,6 +45,8 @@
 		oci->sec_channel = 1;
 	else if (op_class_map->bw == BW40MINUS)
 		oci->sec_channel = -1;
+	else if (op_class_map->bw == BW40)
+		oci->sec_channel = (((oci->channel - 1) / 4) % 2) ? -1 : 1;
 
 	return 0;
 }
diff --git a/src/common/ptksa_cache.c b/src/common/ptksa_cache.c
new file mode 100644
index 0000000..6a053d6
--- /dev/null
+++ b/src/common/ptksa_cache.c
@@ -0,0 +1,321 @@
+/*
+ * RSN PTKSA cache implementation
+ *
+ * Copyright (C) 2019 Intel Corporation
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include "includes.h"
+#include "utils/common.h"
+#include "eloop.h"
+#include "common/ptksa_cache.h"
+
+#define PTKSA_CACHE_MAX_ENTRIES 16
+
+struct ptksa_cache {
+	struct dl_list ptksa;
+	unsigned int n_ptksa;
+};
+
+static void ptksa_cache_set_expiration(struct ptksa_cache *ptksa);
+
+
+static void ptksa_cache_free_entry(struct ptksa_cache *ptksa,
+				   struct ptksa_cache_entry *entry)
+{
+	ptksa->n_ptksa--;
+
+	dl_list_del(&entry->list);
+	bin_clear_free(entry, sizeof(*entry));
+}
+
+
+static void ptksa_cache_expire(void *eloop_ctx, void *timeout_ctx)
+{
+	struct ptksa_cache *ptksa = eloop_ctx;
+	struct ptksa_cache_entry *e, *next;
+	struct os_reltime now;
+
+	if (!ptksa)
+		return;
+
+	os_get_reltime(&now);
+
+	dl_list_for_each_safe(e, next, &ptksa->ptksa,
+			      struct ptksa_cache_entry, list) {
+		if (e->expiration > now.sec)
+			continue;
+
+		wpa_printf(MSG_DEBUG, "Expired PTKSA cache entry for " MACSTR,
+			   MAC2STR(e->addr));
+
+		ptksa_cache_free_entry(ptksa, e);
+	}
+
+	ptksa_cache_set_expiration(ptksa);
+}
+
+
+static void ptksa_cache_set_expiration(struct ptksa_cache *ptksa)
+{
+	struct ptksa_cache_entry *e;
+	int sec;
+	struct os_reltime now;
+
+	eloop_cancel_timeout(ptksa_cache_expire, ptksa, NULL);
+
+	if (!ptksa || !ptksa->n_ptksa)
+		return;
+
+	e = dl_list_first(&ptksa->ptksa, struct ptksa_cache_entry, list);
+	if (!e)
+		return;
+
+	os_get_reltime(&now);
+	sec = e->expiration - now.sec;
+	if (sec < 0)
+		sec = 0;
+
+	eloop_register_timeout(sec + 1, 0, ptksa_cache_expire, ptksa, NULL);
+}
+
+
+/*
+ * ptksa_cache_init - Initialize PTKSA cache
+ *
+ * Returns: Pointer to PTKSA cache data or %NULL on failure
+ */
+struct ptksa_cache * ptksa_cache_init(void)
+{
+	struct ptksa_cache *ptksa = os_zalloc(sizeof(struct ptksa_cache));
+
+	wpa_printf(MSG_DEBUG, "PTKSA: Initializing");
+
+	if (ptksa)
+		dl_list_init(&ptksa->ptksa);
+
+	return ptksa;
+}
+
+
+/*
+ * ptksa_cache_deinit - Free all entries in PTKSA cache
+ * @ptksa: Pointer to PTKSA cache data from ptksa_cache_init()
+ */
+void ptksa_cache_deinit(struct ptksa_cache *ptksa)
+{
+	struct ptksa_cache_entry *e, *next;
+
+	if (!ptksa)
+		return;
+
+	wpa_printf(MSG_DEBUG, "PTKSA: Deinit. n_ptksa=%u", ptksa->n_ptksa);
+
+	dl_list_for_each_safe(e, next, &ptksa->ptksa,
+			      struct ptksa_cache_entry, list)
+		ptksa_cache_free_entry(ptksa, e);
+
+	eloop_cancel_timeout(ptksa_cache_expire, ptksa, NULL);
+	os_free(ptksa);
+}
+
+
+/*
+ * ptksa_cache_get - Fetch a PTKSA cache entry
+ * @ptksa: Pointer to PTKSA cache data from ptksa_cache_init()
+ * @addr: Peer address or %NULL to match any
+ * @cipher: Specific cipher suite to search for or WPA_CIPHER_NONE for any
+ * Returns: Pointer to PTKSA cache entry or %NULL if no match was found
+ */
+struct ptksa_cache_entry * ptksa_cache_get(struct ptksa_cache *ptksa,
+					   const u8 *addr, u32 cipher)
+{
+	struct ptksa_cache_entry *e;
+
+	if (!ptksa)
+		return NULL;
+
+	dl_list_for_each(e, &ptksa->ptksa, struct ptksa_cache_entry, list) {
+		if ((!addr || os_memcmp(e->addr, addr, ETH_ALEN) == 0) &&
+		    (cipher == WPA_CIPHER_NONE || cipher == e->cipher))
+			return e;
+	}
+
+	return NULL;
+}
+
+
+/*
+ * ptksa_cache_list - Dump text list of entries in PTKSA cache
+ * @ptksa: Pointer to PTKSA cache data from ptksa_cache_init()
+ * @buf: Buffer for the list
+ * @len: Length of the buffer
+ * Returns: Number of bytes written to buffer
+ *
+ * This function is used to generate a text format representation of the
+ * current PTKSA cache contents for the ctrl_iface PTKSA command.
+ */
+int ptksa_cache_list(struct ptksa_cache *ptksa, char *buf, size_t len)
+{
+	struct ptksa_cache_entry *e;
+	int i = 0, ret;
+	char *pos = buf;
+	struct os_reltime now;
+
+	if (!ptksa)
+		return 0;
+
+	os_get_reltime(&now);
+
+	ret = os_snprintf(pos, buf + len - pos,
+			  "Index / ADDR / Cipher / expiration (secs) / TK / KDK\n");
+	if (os_snprintf_error(buf + len - pos, ret))
+		return pos - buf;
+	pos += ret;
+
+	dl_list_for_each(e, &ptksa->ptksa, struct ptksa_cache_entry, list) {
+		ret = os_snprintf(pos, buf + len - pos, "%u " MACSTR,
+				  i, MAC2STR(e->addr));
+		if (os_snprintf_error(buf + len - pos, ret))
+			return pos - buf;
+		pos += ret;
+
+		ret = os_snprintf(pos, buf + len - pos, " %s %lu ",
+				  wpa_cipher_txt(e->cipher),
+				  e->expiration - now.sec);
+		if (os_snprintf_error(buf + len - pos, ret))
+			return pos - buf;
+		pos += ret;
+
+		ret = wpa_snprintf_hex(pos, buf + len - pos, e->ptk.tk,
+				       e->ptk.tk_len);
+		if (os_snprintf_error(buf + len - pos, ret))
+			return pos - buf;
+		pos += ret;
+
+		ret = os_snprintf(pos, buf + len - pos, " ");
+		if (os_snprintf_error(buf + len - pos, ret))
+			return pos - buf;
+		pos += ret;
+
+		ret = wpa_snprintf_hex(pos, buf + len - pos, e->ptk.kdk,
+				       e->ptk.kdk_len);
+		if (os_snprintf_error(buf + len - pos, ret))
+			return pos - buf;
+		pos += ret;
+
+		ret = os_snprintf(pos, buf + len - pos, "\n");
+		if (os_snprintf_error(buf + len - pos, ret))
+			return pos - buf;
+		pos += ret;
+
+		i++;
+	}
+
+	return pos - buf;
+}
+
+
+/*
+ * ptksa_cache_flush - Flush PTKSA cache entries
+ *
+ * @ptksa: Pointer to PTKSA cache data from ptksa_cache_init()
+ * @addr: Peer address or %NULL to match any
+ * @cipher: Specific cipher suite to search for or WPA_CIPHER_NONE for any
+ */
+void ptksa_cache_flush(struct ptksa_cache *ptksa, const u8 *addr, u32 cipher)
+{
+	struct ptksa_cache_entry *e, *next;
+	bool removed = false;
+
+	if (!ptksa)
+		return;
+
+	dl_list_for_each_safe(e, next, &ptksa->ptksa, struct ptksa_cache_entry,
+			      list) {
+		if ((!addr || os_memcmp(e->addr, addr, ETH_ALEN) == 0) &&
+		    (cipher == WPA_CIPHER_NONE || cipher == e->cipher)) {
+			wpa_printf(MSG_DEBUG,
+				   "Flush PTKSA cache entry for " MACSTR,
+				   MAC2STR(e->addr));
+
+			ptksa_cache_free_entry(ptksa, e);
+			removed = true;
+		}
+	}
+
+	if (removed)
+		ptksa_cache_set_expiration(ptksa);
+}
+
+
+/*
+ * ptksa_cache_add - Add a PTKSA cache entry
+ * @ptksa: Pointer to PTKSA cache data from ptksa_cache_init()
+ * @addr: Peer address
+ * @cipher: The cipher used
+ * @life_time: The PTK life time in seconds
+ * @ptk: The PTK
+ * Returns: Pointer to the added PTKSA cache entry or %NULL on error
+ *
+ * This function creates a PTKSA entry and adds it to the PTKSA cache.
+ * If an old entry is already in the cache for the same peer and cipher
+ * this entry will be replaced with the new entry.
+ */
+struct ptksa_cache_entry * ptksa_cache_add(struct ptksa_cache *ptksa,
+					   const u8 *addr, u32 cipher,
+					   u32 life_time,
+					   const struct wpa_ptk *ptk)
+{
+	struct ptksa_cache_entry *entry, *tmp;
+	struct os_reltime now;
+
+	if (!ptksa || !ptk || !addr || !life_time || cipher == WPA_CIPHER_NONE)
+		return NULL;
+
+	/* remove a previous entry if present */
+	ptksa_cache_flush(ptksa, addr, cipher);
+
+	/* no place to add another entry */
+	if (ptksa->n_ptksa >= PTKSA_CACHE_MAX_ENTRIES)
+		return NULL;
+
+	entry = os_zalloc(sizeof(*entry));
+	if (!entry)
+		return NULL;
+
+	dl_list_init(&entry->list);
+	os_memcpy(entry->addr, addr, ETH_ALEN);
+	entry->cipher = cipher;
+
+	os_memcpy(&entry->ptk, ptk, sizeof(entry->ptk));
+
+	os_get_reltime(&now);
+	entry->expiration = now.sec + life_time;
+
+	dl_list_for_each(tmp, &ptksa->ptksa, struct ptksa_cache_entry, list) {
+		if (tmp->expiration > entry->expiration)
+			break;
+	}
+
+	/*
+	 * If the list was empty add to the head; otherwise if the expiration is
+	 * later then all other entries, add it to the end of the list;
+	 * otherwise add it before the relevant entry.
+	 */
+	if (!tmp)
+		dl_list_add(&ptksa->ptksa, &entry->list);
+	else if (tmp->expiration < entry->expiration)
+		dl_list_add(&tmp->list, &entry->list);
+	else
+		dl_list_add_tail(&tmp->list, &entry->list);
+
+	ptksa->n_ptksa++;
+	wpa_printf(MSG_DEBUG,
+		   "Added PTKSA cache entry addr=" MACSTR " cipher=%u",
+		   MAC2STR(addr), cipher);
+
+	return entry;
+}
diff --git a/src/common/ptksa_cache.h b/src/common/ptksa_cache.h
new file mode 100644
index 0000000..28ef291
--- /dev/null
+++ b/src/common/ptksa_cache.h
@@ -0,0 +1,79 @@
+/*
+ * RSN PTKSA cache interface
+ *
+ * Copyright (C) 2019 Intel Corporation
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef PTKSA_CACHE_H
+#define PTKSA_CACHE_H
+
+#include "wpa_common.h"
+#include "defs.h"
+#include "list.h"
+
+/**
+ * struct ptksa_cache_entry - PTKSA cache entry
+ */
+struct ptksa_cache_entry {
+	struct dl_list list;
+	struct wpa_ptk ptk;
+	os_time_t expiration;
+	u32 cipher;
+	u8 addr[ETH_ALEN];
+};
+
+#ifdef CONFIG_PTKSA_CACHE
+
+struct ptksa_cache;
+
+struct ptksa_cache * ptksa_cache_init(void);
+void ptksa_cache_deinit(struct ptksa_cache *ptksa);
+struct ptksa_cache_entry * ptksa_cache_get(struct ptksa_cache *ptksa,
+					   const u8 *addr, u32 cipher);
+int ptksa_cache_list(struct ptksa_cache *ptksa, char *buf, size_t len);
+struct ptksa_cache_entry * ptksa_cache_add(struct ptksa_cache *ptksa,
+					   const u8 *addr, u32 cipher,
+					   u32 life_time,
+					   const struct wpa_ptk *ptk);
+void ptksa_cache_flush(struct ptksa_cache *ptksa, const u8 *addr, u32 cipher);
+
+#else /* CONFIG_PTKSA_CACHE */
+
+static inline struct ptksa_cache * ptksa_cache_init(void)
+{
+	return (struct ptksa_cache *) 1;
+}
+
+static inline void ptksa_cache_deinit(struct ptksa_cache *ptksa)
+{
+}
+
+static inline struct ptksa_cache_entry *
+ptksa_cache_get(struct ptksa_cache *ptksa, const u8 *addr, u32 cipher)
+{
+	return NULL;
+}
+
+static inline int ptksa_cache_list(struct ptksa_cache *ptksa,
+				   char *buf, size_t len)
+{
+	return -1;
+}
+
+static inline struct ptksa_cache_entry *
+ptksa_cache_add(struct ptksa_cache *ptksa, const u8 *addr, u32 cipher,
+		u32 life_time, const struct wpa_ptk *ptk)
+{
+	return NULL;
+}
+
+static inline void ptksa_cache_flush(struct ptksa_cache *ptksa,
+				     const u8 *addr, u32 cipher)
+{
+}
+
+#endif /* CONFIG_PTKSA_CACHE */
+#endif /* PTKSA_CACHE_H */
diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index eb6a2c1..f7e5571 100644
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -1445,6 +1445,25 @@
  *	%QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL and
  *	%QCA_WLAN_VENDOR_ATTR_THERMAL_COMPLETION_WINDOW attributes from
  *	userspace.
+ * @QCA_WLAN_VENDOR_FEATURE_ADAPTIVE_11R: Device supports Adaptive 11r.
+ *	With Adaptive 11r feature, access points advertise the vendor
+ *	specific IEs and MDE but do not include FT AKM in the RSNE.
+ *	The Adaptive 11r supported stations are expected to identify
+ *	such vendor specific IEs and connect to the AP in FT mode though
+ *	the profile is configured in non-FT mode.
+ *	The driver-based SME cases also need to have this support for
+ *	Adaptive 11r to handle the connection and roaming scenarios.
+ *	This flag indicates the support for the same to the user space.
+ * @QCA_WLAN_VENDOR_FEATURE_CONCURRENT_BAND_SESSIONS: Device supports
+ *	concurrent network sessions on different Wi-Fi bands. This feature
+ *	capability is attributed to the hardware's capability to support
+ *	the same (e.g., DBS).
+ * @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT: Flag indicating whether the
+ *	responses for the respective TWT operations are asynchronous (separate
+ *	event message) from the driver. If not specified, the responses are
+ *	synchronous (in vendor command reply) to the request. Each TWT
+ *	operation is specifically mentioned (against its respective
+ *	documentation) to support either of these or both modes.
  * @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits
  */
 enum qca_wlan_vendor_features {
@@ -1460,6 +1479,9 @@
 	QCA_WLAN_VENDOR_FEATURE_11AX			= 9,
 	QCA_WLAN_VENDOR_FEATURE_6GHZ_SUPPORT		= 10,
 	QCA_WLAN_VENDOR_FEATURE_THERMAL_CONFIG		= 11,
+	QCA_WLAN_VENDOR_FEATURE_ADAPTIVE_11R		= 12,
+	QCA_WLAN_VENDOR_FEATURE_CONCURRENT_BAND_SESSIONS = 13,
+	QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT	= 14,
 	NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */
 };
 
@@ -2285,6 +2307,10 @@
 	 * frame. The updated NSS value after the connection shall not be
 	 * greater than the one negotiated during the connection. Any such
 	 * higher value configuration shall be returned with a failure.
+	 * Only symmetric NSS configuration (such as 2X2 or 1X1) can be done
+	 * using this attribute. QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS and
+	 * QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS attributes shall be used to
+	 * configure the asymmetric NSS configuration (such as 1X2).
 	 */
 	QCA_WLAN_VENDOR_ATTR_CONFIG_NSS = 70,
 	/* 8-bit unsigned value to trigger Optimized Power Management:
@@ -2333,6 +2359,46 @@
 	 */
 	QCA_WLAN_VENDOR_ATTR_CONFIG_ANI_LEVEL = 76,
 
+	/* 8-bit unsigned value. This attribute is used to dynamically configure
+	 * the number of spatial streams used for transmitting the data. When
+	 * configured in the disconnected state, the configured value will
+	 * be considered for the following connection attempt.
+	 * If the NSS is updated after the connection, the updated NSS value
+	 * is notified to the peer using the Operating Mode Notification/Spatial
+	 * Multiplexing Power Save frame.
+	 * The TX NSS value configured after the connection shall not be greater
+	 * than the value negotiated during the connection. Any such higher
+	 * value configuration shall be treated as invalid configuration by
+	 * the driver. This attribute shall be configured along with
+	 * QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS attribute to define the symmetric
+	 * configuration (such as 2X2 or 1X1) or the asymmetric
+	 * configuration (such as 1X2).
+	 * If QCA_WLAN_VENDOR_ATTR_CONFIG_NSS attribute is also provided along
+	 * with this QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS attribute the driver
+	 * will update the TX NSS based on QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS.
+	 */
+	QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS = 77,
+
+	/* 8-bit unsigned value. This attribute is used to dynamically configure
+	 * the number of spatial streams used for receiving the data. When
+	 * configured in the disconnected state, the configured value will
+	 * be considered for the following connection attempt.
+	 * If the NSS is updated after the connection, the updated NSS value
+	 * is notified to the peer using the Operating Mode Notification/Spatial
+	 * Multiplexing Power Save frame.
+	 * The RX NSS value configured after the connection shall not be greater
+	 * than the value negotiated during the connection. Any such higher
+	 * value configuration shall be treated as invalid configuration by
+	 * the driver. This attribute shall be configured along with
+	 * QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS attribute to define the symmetric
+	 * configuration (such as 2X2 or 1X1) or the asymmetric
+	 * configuration (such as 1X2).
+	 * If QCA_WLAN_VENDOR_ATTR_CONFIG_NSS attribute is also provided along
+	 * with this QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS attribute the driver
+	 * will update the RX NSS based on QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS.
+	 */
+	QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS = 78,
+
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
 	QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =
@@ -2428,23 +2494,50 @@
  * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
  * %QCA_WLAN_VENDOR_GPIO_OUTPUT.
  *
- * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE: Required (u32)
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE: Optional (u32)
  * value to specify the GPIO pull type. Please refer to enum qca_gpio_pull_type
  * for the available values.
  * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
- * %QCA_WLAN_VENDOR_GPIO_CONFIG.
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG and
+ * %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG attribute is not present.
+ * Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG
+ * attribute is present.
  *
- * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE: Required (u32)
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE: Optional (u32)
  * value to specify the GPIO interrupt mode. Please refer to enum
  * qca_gpio_interrupt_mode for the available values.
  * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
- * %QCA_WLAN_VENDOR_GPIO_CONFIG.
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG and
+ * %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG attribute is not present.
+ * Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG
+ * attribute is present.
  *
- * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DIR: Required (u32)
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DIR: Optional (u32)
  * value to specify the GPIO direction. Please refer to enum qca_gpio_direction
  * for the available values.
  * This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
- * %QCA_WLAN_VENDOR_GPIO_CONFIG.
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG and
+ * %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG attribute is not present.
+ * Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG
+ * attribute is present.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MUX_CONFIG: Optional (u32)
+ * Value to specify the mux config. Meaning of a given value is dependent
+ * on the target chipset and GPIO pin. Must be of the range 0-15.
+ * Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG. Defaults to 0.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DRIVE: Optional (u32)
+ * Value to specify the drive, refer to enum qca_gpio_drive.
+ * Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG. Defaults to QCA_WLAN_GPIO_DRIVE_2MA(0).
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG: Optional (flag)
+ * Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is
+ * %QCA_WLAN_VENDOR_GPIO_CONFIG. When present this attribute signals that all
+ * other parameters for the given GPIO will be obtained from internal
+ * configuration. Only %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM must be
+ * specified to indicate the GPIO pin being configured.
  */
 enum qca_wlan_gpio_attr {
 	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INVALID = 0,
@@ -2460,6 +2553,12 @@
 	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE = 5,
 	/* Unsigned 32-bit attribute for GPIO direction to configure */
 	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DIR = 6,
+	/* Unsigned 32-bit attribute for GPIO mux config */
+	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MUX_CONFIG = 7,
+	/* Unsigned 32-bit attribute for GPIO drive */
+	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DRIVE = 8,
+	/* Flag attribute for using internal GPIO configuration */
+	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG = 9,
 
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST,
@@ -2535,6 +2634,30 @@
 };
 
 /**
+ * enum qca_gpio_drive - GPIO drive
+ * @QCA_WLAN_GPIO_DRIVE_2MA: drive 2MA
+ * @QCA_WLAN_GPIO_DRIVE_4MA: drive 4MA
+ * @QCA_WLAN_GPIO_DRIVE_6MA: drive 6MA
+ * @QCA_WLAN_GPIO_DRIVE_8MA: drive 8MA
+ * @QCA_WLAN_GPIO_DRIVE_10MA: drive 10MA
+ * @QCA_WLAN_GPIO_DRIVE_12MA: drive 12MA
+ * @QCA_WLAN_GPIO_DRIVE_14MA: drive 14MA
+ * @QCA_WLAN_GPIO_DRIVE_16MA: drive 16MA
+ * @QCA_WLAN_GPIO_DRIVE_MAX: invalid GPIO drive
+ */
+enum qca_gpio_drive {
+	QCA_WLAN_GPIO_DRIVE_2MA = 0,
+	QCA_WLAN_GPIO_DRIVE_4MA = 1,
+	QCA_WLAN_GPIO_DRIVE_6MA = 2,
+	QCA_WLAN_GPIO_DRIVE_8MA = 3,
+	QCA_WLAN_GPIO_DRIVE_10MA = 4,
+	QCA_WLAN_GPIO_DRIVE_12MA = 5,
+	QCA_WLAN_GPIO_DRIVE_14MA = 6,
+	QCA_WLAN_GPIO_DRIVE_16MA = 7,
+	QCA_WLAN_GPIO_DRIVE_MAX,
+};
+
+/**
  * qca_wlan_set_qdepth_thresh_attr - Parameters for setting
  * MSDUQ depth threshold per peer per tid in the target
  *
@@ -4120,6 +4243,139 @@
 	QCA_ROAM_TRIGGER_REASON_EXTERNAL_SCAN	= 1 << 12,
 };
 
+/*
+ * enum qca_vendor_roam_fail_reasons: Defines the various roam
+ * fail reasons. This enum value is used in
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON attribute.
+ *
+ * @QCA_ROAM_FAIL_REASON_SCAN_NOT_ALLOWED: Roam module in the firmware is not
+ * able to trigger the scan.
+ * @QCA_ROAM_FAIL_REASON_NO_AP_FOUND: No roamable APs found during roam scan.
+ * @QCA_ROAM_FAIL_REASON_NO_CAND_AP_FOUND: No candidate APs found during roam
+ * scan.
+ * @QCA_ROAM_FAIL_REASON_HOST: Roam fail due to disconnect issued from host.
+ * @QCA_ROAM_FAIL_REASON_AUTH_SEND: Unable to send Authentication frame.
+ * @QCA_ROAM_FAIL_REASON_AUTH_RECV: Received Authentication frame with error
+ * status code.
+ * @QCA_ROAM_FAIL_REASON_NO_AUTH_RESP: Authentication frame not received.
+ * @QCA_ROAM_FAIL_REASON_REASSOC_SEND: Unable to send Reassociation Request
+ * frame.
+ * @QCA_ROAM_FAIL_REASON_REASSOC_RECV: Received Reassociation Response frame
+ * with error status code.
+ * @QCA_ROAM_FAIL_REASON_NO_REASSOC_RESP: Reassociation Response frame not
+ * received.
+ * @QCA_ROAM_FAIL_REASON_SCAN_FAIL: Scan module not able to start scan.
+ * @QCA_ROAM_FAIL_REASON_AUTH_NO_ACK: No ACK is received for Authentication
+ * frame.
+ * @QCA_ROAM_FAIL_REASON_AUTH_INTERNAL_DROP: Authentication frame is dropped
+ * internally before transmission.
+ * @QCA_ROAM_FAIL_REASON_REASSOC_NO_ACK: No ACK is received for Reassociation
+ * Request frame.
+ * @QCA_ROAM_FAIL_REASON_REASSOC_INTERNAL_DROP: Reassociation Request frame is
+ * dropped internally.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M1_TIMEOUT: EAPOL-Key M1 is not received and
+ * times out.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M2_SEND: Unable to send EAPOL-Key M2 frame.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M2_INTERNAL_DROP: EAPOL-Key M2 frame dropped
+ * internally.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M2_NO_ACK: No ACK is received for EAPOL-Key
+ * M2 frame.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M3_TIMEOUT: EAPOL-Key M3 frame is not received.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M4_SEND: Unable to send EAPOL-Key M4 frame.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M4_INTERNAL_DROP: EAPOL-Key M4 frame dropped
+ * internally.
+ * @QCA_ROAM_FAIL_REASON_EAPOL_M4_NO_ACK: No ACK is received for EAPOL-Key M4
+ * frame.
+ * @QCA_ROAM_FAIL_REASON_NO_SCAN_FOR_FINAL_BEACON_MISS: Roam scan is not
+ * started for final beacon miss case.
+ * @QCA_ROAM_FAIL_REASON_DISCONNECT: Deauthentication or Disassociation frame
+ * received from the AP during roaming handoff.
+ * @QCA_ROAM_FAIL_REASON_RESUME_ABORT: Firmware roams to the AP when the Apps
+ * or host is suspended and gives the indication of the last roamed AP only
+ * when the Apps is resumed. If the Apps is resumed while the roaming is in
+ * progress, this ongoing roaming is aborted and the last roamed AP is
+ * indicated to host.
+ * @QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID: WPA3-SAE invalid PMKID.
+ * @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT: WPA3-SAE pre-authentication times
+ * out.
+ * @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL: WPA3-SAE pre-authentication fails.
+ */
+enum qca_vendor_roam_fail_reasons {
+	QCA_ROAM_FAIL_REASON_NONE = 0,
+	QCA_ROAM_FAIL_REASON_SCAN_NOT_ALLOWED = 1,
+	QCA_ROAM_FAIL_REASON_NO_AP_FOUND = 2,
+	QCA_ROAM_FAIL_REASON_NO_CAND_AP_FOUND = 3,
+	QCA_ROAM_FAIL_REASON_HOST = 4,
+	QCA_ROAM_FAIL_REASON_AUTH_SEND = 5,
+	QCA_ROAM_FAIL_REASON_AUTH_RECV = 6,
+	QCA_ROAM_FAIL_REASON_NO_AUTH_RESP = 7,
+	QCA_ROAM_FAIL_REASON_REASSOC_SEND = 8,
+	QCA_ROAM_FAIL_REASON_REASSOC_RECV = 9,
+	QCA_ROAM_FAIL_REASON_NO_REASSOC_RESP = 10,
+	QCA_ROAM_FAIL_REASON_SCAN_FAIL = 11,
+	QCA_ROAM_FAIL_REASON_AUTH_NO_ACK = 12,
+	QCA_ROAM_FAIL_REASON_AUTH_INTERNAL_DROP = 13,
+	QCA_ROAM_FAIL_REASON_REASSOC_NO_ACK = 14,
+	QCA_ROAM_FAIL_REASON_REASSOC_INTERNAL_DROP = 15,
+	QCA_ROAM_FAIL_REASON_EAPOL_M1_TIMEOUT = 16,
+	QCA_ROAM_FAIL_REASON_EAPOL_M2_SEND = 17,
+	QCA_ROAM_FAIL_REASON_EAPOL_M2_INTERNAL_DROP = 18,
+	QCA_ROAM_FAIL_REASON_EAPOL_M2_NO_ACK = 19,
+	QCA_ROAM_FAIL_REASON_EAPOL_M3_TIMEOUT = 20,
+	QCA_ROAM_FAIL_REASON_EAPOL_M4_SEND = 21,
+	QCA_ROAM_FAIL_REASON_EAPOL_M4_INTERNAL_DROP = 22,
+	QCA_ROAM_FAIL_REASON_EAPOL_M4_NO_ACK = 23,
+	QCA_ROAM_FAIL_REASON_NO_SCAN_FOR_FINAL_BEACON_MISS = 24,
+	QCA_ROAM_FAIL_REASON_DISCONNECT = 25,
+	QCA_ROAM_FAIL_REASON_RESUME_ABORT = 26,
+	QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID = 27,
+	QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT = 28,
+	QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL = 29,
+};
+
+/*
+ * enum qca_vendor_roam_invoke_fail_reasons: Defines the various roam
+ * invoke fail reasons. This enum value is used in
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON attribute.
+ *
+ * @QCA_ROAM_INVOKE_STATUS_IFACE_INVALID: Invalid interface ID is passed
+ * in roam invoke command.
+ * @QCA_ROAM_INVOKE_STATUS_OFFLOAD_DISABLE: Roam offload in firmware is not
+ * enabled.
+ * @QCA_ROAM_INVOKE_STATUS_AP_SSID_LENGTH_INVALID: Connected AP profile SSID
+ * length is invalid.
+ * @QCA_ROAM_INVOKE_STATUS_ROAM_DISALLOW: Firmware internal roaming is already
+ * in progress.
+ * @QCA_ROAM_INVOKE_STATUS_NON_ROAMABLE_AP: Host sends the Beacon/Probe Response
+ * of the AP in the roam invoke command to firmware. This reason is sent by the
+ * firmware when the given AP is configured to be ignored or SSID/security
+ * does not match.
+ * @QCA_ROAM_INVOKE_STATUS_ROAM_INTERNAL_FAIL: Roam handoff failed because of
+ * firmware internal reasons.
+ * @QCA_ROAM_INVOKE_STATUS_DISALLOW: Roam invoke trigger is not enabled.
+ * @QCA_ROAM_INVOKE_STATUS_SCAN_FAIL: Scan start fail for roam invoke.
+ * @QCA_ROAM_INVOKE_STATUS_START_ROAM_FAIL: Roam handoff start fail.
+ * @QCA_ROAM_INVOKE_STATUS_INVALID_PARAMS: Roam invoke parameters are invalid.
+ * @QCA_ROAM_INVOKE_STATUS_NO_CAND_AP: No candidate AP found to roam to.
+ * @QCA_ROAM_INVOKE_STATUS_ROAM_FAIL: Roam handoff failed.
+ */
+enum qca_vendor_roam_invoke_fail_reasons {
+	QCA_ROAM_INVOKE_STATUS_NONE = 0,
+	QCA_ROAM_INVOKE_STATUS_IFACE_INVALID = 1,
+	QCA_ROAM_INVOKE_STATUS_OFFLOAD_DISABLE = 2,
+	QCA_ROAM_INVOKE_STATUS_AP_SSID_LENGTH_INVALID = 3,
+	QCA_ROAM_INVOKE_STATUS_ROAM_DISALLOW = 4,
+	QCA_ROAM_INVOKE_STATUS_NON_ROAMABLE_AP = 5,
+	QCA_ROAM_INVOKE_STATUS_ROAM_INTERNAL_FAIL = 6,
+	QCA_ROAM_INVOKE_STATUS_DISALLOW = 7,
+	QCA_ROAM_INVOKE_STATUS_SCAN_FAIL = 8,
+	QCA_ROAM_INVOKE_STATUS_START_ROAM_FAIL = 9,
+	QCA_ROAM_INVOKE_STATUS_INVALID_PARAMS = 10,
+	QCA_ROAM_INVOKE_STATUS_NO_CAND_AP = 11,
+	QCA_ROAM_INVOKE_STATUS_ROAM_FAIL = 12,
+
+};
+
 /**
  * enum qca_vendor_attr_roam_candidate_selection_criteria:
  *
@@ -6222,6 +6478,14 @@
 	 * the FW on a specific VDEV.
 	 */
 	QCA_WLAN_HANG_VDEV_PEER_DELETE_ALL_RESPONSE_TIMED_OUT = 22,
+	/* WMI sequence mismatch between WMI command and Tx completion */
+	QCA_WLAN_HANG_WMI_BUF_SEQUENCE_MISMATCH = 23,
+	/* Write to Device HAL register failed */
+	QCA_WLAN_HANG_REG_WRITE_FAILURE = 24,
+	/* No credit left to send the wow_wakeup_from_sleep to firmware */
+	QCA_WLAN_HANG_SUSPEND_NO_CREDIT = 25,
+	/* Bus failure */
+	QCA_WLAN_HANG_BUS_FAILURE = 26,
 };
 
 /**
@@ -7685,6 +7949,46 @@
 	 */
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FILS_DISCOVERY_FRAMES_TX = 44,
 
+	/* 8-bit unsigned value to configure the driver/firmware to enable or
+	 * disable full bandwidth UL MU-MIMO subfield in the HE PHY capabilities
+	 * information field.
+	 * 0 - Disable full bandwidth UL MU-MIMO subfield
+	 * 1 - Enable full bandwidth UL MU-MIMO subfield
+	 * This attribute is used to configure the testbed device.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FULL_BW_UL_MU_MIMO = 45,
+
+	/* 16-bit unsigned value to configure the driver with a specific BSS
+	 * max idle period to advertise in the BSS Max Idle Period element
+	 * (IEEE Std 802.11-2016, 9.4.2.79) in (Re)Association Request frames.
+	 * This attribute is used to configure the testbed device.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_BSS_MAX_IDLE_PERIOD = 46,
+
+	/* 8-bit unsigned value to configure the driver to use only RU 242 tone
+	 * for data transmission.
+	 * 0 - Default behavior, 1 - Configure RU 242 tone for data Tx.
+	 * This attribute is used to configure the testbed device.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_RU_242_TONE_TX = 47,
+
+	/* 8-bit unsigned value to configure the driver to disable data and
+	 * management response frame transmission to test the BSS max idle
+	 * feature.
+	 * 0 - Default behavior, 1 - Disable data and management response Tx.
+	 * This attribute is used to configure the testbed device.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_DISABLE_DATA_MGMT_RSP_TX = 48,
+
+	/* 8-bit unsigned value to configure the driver/firmware to enable or
+	 * disable Punctured Preamble Rx subfield in the HE PHY capabilities
+	 * information field.
+	 * 0 - Disable Punctured Preamble Rx subfield
+	 * 1 - Enable Punctured Preamble Rx subfield
+	 * This attribute is used to configure the testbed device.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_PUNCTURED_PREAMBLE_RX = 49,
+
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =
@@ -7694,26 +7998,69 @@
 /**
  * enum qca_wlan_twt_operation - Operation of the config TWT request
  * Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION.
+ * The response for the respective operations can be either synchronous or
+ * asynchronous (wherever specified). If synchronous, the response to this
+ * operation is obtained in the corresponding vendor command reply to the user
+ * space. For the asynchronous case the response is obtained as an event with
+ * the same operation type.
+ *
+ * Drivers shall support either of these modes but not both simultaneously.
+ * This support for asynchronous mode is advertised through the flag
+ * QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT. If this flag is not advertised,
+ * the driver shall support synchronous mode.
  *
  * @QCA_WLAN_TWT_SET: Setup a TWT session. Required parameters are configured
  * through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
- * qca_wlan_vendor_attr_twt_setup.
+ * qca_wlan_vendor_attr_twt_setup. Depending upon the
+ * @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT capability, this is either a
+ * synchronous or asynchronous operation.
  *
  * @QCA_WLAN_TWT_GET: Get the configured TWT parameters. Required parameters are
  * obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
- * qca_wlan_vendor_attr_twt_setup.
+ * qca_wlan_vendor_attr_twt_setup. This is a synchronous operation.
  *
  * @QCA_WLAN_TWT_TERMINATE: Terminate the TWT session. Required parameters are
  * obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
  * qca_wlan_vendor_attr_twt_setup. Valid only after the TWT session is setup.
+ * This terminate can either get triggered by the user space or can as well be
+ * a notification from the firmware if it initiates a terminate.
+ * Depending upon the @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT capability,
+ * the request from user space can either be a synchronous or asynchronous
+ * operation.
  *
  * @QCA_WLAN_TWT_SUSPEND: Suspend the TWT session. Required parameters are
  * obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
  * qca_wlan_vendor_attr_twt_setup. Valid only after the TWT session is setup.
+ * Depending upon the @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT capability,
+ * this is either a synchronous or asynchronous operation.
  *
  * @QCA_WLAN_TWT_RESUME: Resume the TWT session. Required parameters are
  * configured through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum
  * qca_wlan_vendor_attr_twt_resume. Valid only after the TWT session is setup.
+ * This can as well be a notification from the firmware on a QCA_WLAN_TWT_NUDGE
+ * request. Depending upon the @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT
+ * capability, this is either a synchronous or asynchronous operation.
+ *
+ * @QCA_WLAN_TWT_NUDGE: Suspend and resume the TWT session. TWT nudge is a
+ * combination of suspend and resume in a single request. Required parameters
+ * are configured through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the
+ * enum qca_wlan_vendor_attr_twt_nudge. Valid only after the TWT session is
+ * setup. Depending upon the @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT
+ * capability, this is either a synchronous or asynchronous operation.
+ *
+ * @QCA_WLAN_TWT_GET_STATS: Get the TWT session traffic statistics information.
+ * Refers the enum qca_wlan_vendor_attr_twt_stats. Valid only after the TWT
+ * session is setup. It's a synchronous operation.
+ *
+ * @QCA_WLAN_TWT_CLEAR_STATS: Clear TWT session traffic statistics information.
+ * Valid only after the TWT session is setup. It's a synchronous operation.
+ *
+ * @QCA_WLAN_TWT_GET_CAPABILITIES: Get TWT capabilities of this device and its
+ * peer. Refers the enum qca_wlan_vendor_attr_twt_capability. It's a synchronous
+ * operation.
+ *
+ * @QCA_WLAN_TWT_SETUP_READY_NOTIFY: Notify userspace that the firmare is
+ * ready for a new TWT session setup after it issued a TWT teardown.
  */
 enum qca_wlan_twt_operation {
 	QCA_WLAN_TWT_SET = 0,
@@ -7721,6 +8068,11 @@
 	QCA_WLAN_TWT_TERMINATE = 2,
 	QCA_WLAN_TWT_SUSPEND = 3,
 	QCA_WLAN_TWT_RESUME = 4,
+	QCA_WLAN_TWT_NUDGE = 5,
+	QCA_WLAN_TWT_GET_STATS = 6,
+	QCA_WLAN_TWT_CLEAR_STATS = 7,
+	QCA_WLAN_TWT_GET_CAPABILITIES = 8,
+	QCA_WLAN_TWT_SETUP_READY_NOTIFY = 9,
 };
 
 /**
@@ -7734,8 +8086,8 @@
  *
  * @QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS: Nested attribute representing the
  * parameters configured for TWT. These parameters are represented by
- * enum qca_wlan_vendor_attr_twt_setup or enum qca_wlan_vendor_attr_twt_resume
- * based on the operation.
+ * enum qca_wlan_vendor_attr_twt_setup, enum qca_wlan_vendor_attr_twt_resume,
+ * or enum qca_wlan_vendor_attr_twt_stats based on the operation.
  */
 enum qca_wlan_vendor_attr_config_twt {
 	QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_INVALID = 0,
@@ -7896,6 +8248,19 @@
 };
 
 /**
+ * qca_wlan_twt_setup_state: Represents the TWT session states.
+ *
+ * QCA_WLAN_TWT_SETUP_STATE_NOT_ESTABLISHED: TWT session not established.
+ * QCA_WLAN_TWT_SETUP_STATE_ACTIVE: TWT session is active.
+ * QCA_WLAN_TWT_SETUP_STATE_SUSPEND: TWT session is in suspended state.
+ */
+enum qca_wlan_twt_setup_state {
+	QCA_WLAN_TWT_SETUP_STATE_NOT_ESTABLISHED = 0,
+	QCA_WLAN_TWT_SETUP_STATE_ACTIVE = 1,
+	QCA_WLAN_TWT_SETUP_STATE_SUSPEND = 2,
+};
+
+/**
  * enum qca_wlan_vendor_attr_twt_setup: Represents attributes for
  * TWT (Target Wake Time) setup request. These attributes are sent as part of
  * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP and
@@ -7945,6 +8310,14 @@
  * 2. TWT GET Request and Response
  * 3. TWT TERMINATE Request and Response
  * 4. TWT SUSPEND Request and Response
+ * Flow ID values from 0 to 254 represent a single TWT session
+ * Flow ID value of 255 represents all TWT sessions for the following
+ * 1. TWT TERMINATE Request and Response
+ * 2. TWT SUSPEND Request and Response
+ * 4. TWT CLEAR STATISTICS request
+ * 5. TWT GET STATISTICS request and response
+ * If an invalid dialog ID is provided, status
+ * QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST will be returned.
  *
  * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP: Required (u8)
  * This attribute (exp) is used along with the mantissa to derive the
@@ -7995,6 +8368,7 @@
  * 2. TWT TERMINATE Response
  * 3. TWT SUSPEND Response
  * 4. TWT RESUME Response
+ * 5. TWT NUDGE Response
  *
  * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_RESP_TYPE: Required (u8)
  * This field is applicable for TWT response only.
@@ -8031,6 +8405,23 @@
  * 4. TWT SUSPEND Request
  * In STA mode, this is an optional parameter in request and response for
  * the above four TWT operations.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MIN_WAKE_INTVL: Optional (u32)
+ * Minimum tolerance limit of wake interval parameter in microseconds.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX_WAKE_INTVL: Optional (u32)
+ * Maximum tolerance limit of wake interval parameter in microseconds.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MIN_WAKE_DURATION: Optional (u32)
+ * Minimum tolerance limit of wake duration parameter in microseconds.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX_WAKE_DURATION: Optional (u32)
+ * Maximum tolerance limit of wake duration parameter in microseconds.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_STATE: Optional (u32)
+ * TWT state for the given dialog id. The values for this are represented
+ * by enum qca_wlan_twt_setup_state.
+ * This is obtained through TWT GET operation.
  */
 enum qca_wlan_vendor_attr_twt_setup {
 	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_INVALID = 0,
@@ -8052,6 +8443,11 @@
 	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TWT_INFO_ENABLED = 14,
 
 	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAC_ADDR = 15,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MIN_WAKE_INTVL = 16,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX_WAKE_INTVL = 17,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MIN_WAKE_DURATION = 18,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX_WAKE_DURATION = 19,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_STATE = 20,
 
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST,
@@ -8081,6 +8477,16 @@
  * unknown reason
  * @QCA_WLAN_VENDOR_TWT_STATUS_ALREADY_SUSPENDED: TWT session already in
  * suspend state
+ * @QCA_WLAN_VENDOR_TWT_STATUS_IE_INVALID: FW has dropped the frame due to
+ * invalid IE in the received TWT frame
+ * @QCA_WLAN_VENDOR_TWT_STATUS_PARAMS_NOT_IN_RANGE: Parameters received from
+ * the responder are not in the specified range
+ * @QCA_WLAN_VENDOR_TWT_STATUS_PEER_INITIATED_TERMINATE: FW terminated the TWT
+ * session due to request from the responder. Used on the TWT_TERMINATE
+ * notification from the firmware.
+ * @QCA_WLAN_VENDOR_TWT_STATUS_ROAM_INITIATED_TERMINATE: FW terminated the TWT
+ * session due to roaming. Used on the TWT_TERMINATE notification from the
+ * firmware.
  */
 enum qca_wlan_vendor_twt_status {
 	QCA_WLAN_VENDOR_TWT_STATUS_OK = 0,
@@ -8097,6 +8503,10 @@
 	QCA_WLAN_VENDOR_TWT_STATUS_DENIED = 11,
 	QCA_WLAN_VENDOR_TWT_STATUS_UNKNOWN_ERROR = 12,
 	QCA_WLAN_VENDOR_TWT_STATUS_ALREADY_SUSPENDED = 13,
+	QCA_WLAN_VENDOR_TWT_STATUS_IE_INVALID = 14,
+	QCA_WLAN_VENDOR_TWT_STATUS_PARAMS_NOT_IN_RANGE = 15,
+	QCA_WLAN_VENDOR_TWT_STATUS_PEER_INITIATED_TERMINATE = 16,
+	QCA_WLAN_VENDOR_TWT_STATUS_ROAM_INITIATED_TERMINATE = 17,
 };
 
 /**
@@ -8123,6 +8533,10 @@
  * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_FLOW_ID: Required (u8).
  * Flow ID is the unique identifier for each TWT session. This attribute
  * represents the respective TWT session to resume.
+ * Flow ID values from 0 to 254 represent a single TWT session
+ * Flow ID value of 255 represents all TWT sessions.
+ * If an invalid dialog id is provided, status
+ * QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST will be returned.
  *
  * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_MAC_ADDR: 6-byte MAC address
  * Represents the MAC address of the peer to which TWT Resume is
@@ -8145,6 +8559,210 @@
 };
 
 /**
+ * enum qca_wlan_vendor_attr_twt_nudge - Represents attributes for
+ * TWT (Target Wake Time) nudge request. TWT nudge is a combination of suspend
+ * and resume in a single request. These attributes are sent as part of
+ * %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_FLOW_ID: Required (u8)
+ * Flow ID is the unique identifier for each TWT session. This attribute
+ * represents the respective TWT session to suspend and resume.
+ * Flow ID values from 0 to 254 represent a single TWT session
+ * Flow ID value of 255 represents all TWT sessions in TWT NUDGE request
+ * and response.
+ * If an invalid dialog id is provided, status
+ * QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST will be returned.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME: Required (u32)
+ * This attribute is used as the SP offset which is the offset from
+ * TSF after which the wake happens. The units are in microseconds.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_NEXT_TWT_SIZE: Required (u32)
+ * This attribute represents the next TWT subfield size.
+ * Value 0 represents 0 bits, 1 represents 32 bits, 2 for 48 bits,
+ * and 4 for 64 bits.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_MAC_ADDR: 6-byte MAC address
+ * Represents the MAC address of the peer to which TWT Suspend and Resume is
+ * being sent. This is used in AP mode to represent the respective
+ * client and is a required parameter. In STA mode, this is an optional
+ * parameter.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME_TSF: Optional (u64)
+ * This field contains absolute TSF value of the time at which the TWT
+ * session will be resumed.
+ */
+enum qca_wlan_vendor_attr_twt_nudge {
+	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_FLOW_ID = 1,
+	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME = 2,
+	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_NEXT_TWT_SIZE = 3,
+	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_MAC_ADDR = 4,
+	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME_TSF = 5,
+
+	/* keep last */
+	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_MAX =
+	QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_twt_stats: Represents attributes for
+ * TWT (Target Wake Time) get statistics and clear statistics request.
+ * These attributes are sent as part of
+ * %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_FLOW_ID: Required (u8)
+ * Flow ID is the unique identifier for each TWT session. This attribute
+ * represents the respective TWT session for get and clear TWT statistics.
+ * Flow ID values from 0 to 254 represent a single TWT session
+ * Flow ID value of 255 represents all TWT sessions in
+ * 1) TWT GET STATISTICS request and response
+ * 2) TWT CLEAR STATISTICS request
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAC_ADDR: 6-byte MAC address
+ * Represents the MAC address of the peer for which TWT Statistics
+ * is required.
+ * In AP mode this is used to represent the respective
+ * client and is a required parameter for
+ * 1) TWT GET STATISTICS request and response
+ * 2) TWT CLEAR STATISTICS request and response
+ * In STA mode, this is an optional parameter.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_SESSION_WAKE_DURATION: Required (u32)
+ * This is the duration of the service period in microseconds.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVG_WAKE_DURATION: Required (u32)
+ * Average of the actual wake duration observed so far. Unit is microseconds.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS: Required (u32)
+ * The number of TWT service periods elapsed so far.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_MIN_WAKE_DURATION: Required (u32)
+ * This is the minimum value of the wake duration observed across
+ * QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS. Unit is
+ * microseconds.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAX_WAKE_DURATION: Required (u32)
+ * This is the maximum value of wake duration observed across
+ * QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS. Unit is
+ * microseconds.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_TX_MPDU: Required (u32)
+ * Average number of MPDUs transmitted successfully across
+ * QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_RX_MPDU: Required (u32)
+ * Average number of MPDUs received successfully across
+ * QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_TX_PACKET_SIZE: Required (u32)
+ * Average number of bytes transmitted successfully across
+ * QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_RX_PACKET_SIZE: Required (u32)
+ * Average number of bytes received successfully across
+ * QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS.
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_STATS_STATUS: Required (u32)
+ * Status of the TWT GET STATISTICS request.
+ * This contains status values in enum qca_wlan_vendor_twt_status
+ * Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware.
+ */
+enum qca_wlan_vendor_attr_twt_stats {
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_FLOW_ID = 1,
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAC_ADDR = 2,
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_SESSION_WAKE_DURATION = 3,
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVG_WAKE_DURATION = 4,
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS = 5,
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_MIN_WAKE_DURATION = 6,
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAX_WAKE_DURATION = 7,
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_TX_MPDU = 8,
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_RX_MPDU = 9,
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_TX_PACKET_SIZE = 10,
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_RX_PACKET_SIZE = 11,
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_STATUS = 12,
+
+	/* keep last */
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAX =
+	QCA_WLAN_VENDOR_ATTR_TWT_STATS_AFTER_LAST - 1,
+};
+
+/**
+ * qca_wlan_twt_get_capa  - Represents the bitmap of TWT capabilities
+ * supported by the device and the peer.
+ * Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_GET_CAPABILITIES
+ *
+ * @QCA_WLAN_TWT_CAPA_REQUESTOR: TWT requestor support is advertised by
+ * TWT non-scheduling STA. This capability is advertised in the HE
+ * Capability/Extended Capabilities information element in the
+ * Association Request frame by the device.
+ *
+ * @QCA_WLAN_TWT_CAPA_RESPONDER: TWT responder support is advertised by
+ * the TWT scheduling AP. This capability is advertised in the Extended
+ * Capabilities/HE Capabilities information element.
+ *
+ * @QCA_WLAN_TWT_CAPA_BROADCAST: On the requestor side, this indicates support
+ * for the broadcast TWT functionality. On the responder side, this indicates
+ * support for the role of broadcast TWT scheduling functionality. This
+ * capability is advertised in the HE Capabilities information element.
+ *
+ * @QCA_WLAN_TWT_CAPA_TWT_FLEXIBLE: The device supports flexible TWT schedule.
+ * This capability is advertised in the HE Capabilities information element.
+ *
+ * @QCA_WLAN_TWT_CAPA_REQUIRED: The TWT Required is advertised by AP to indicate
+ * that it mandates the associated HE STAs to support TWT. This capability is
+ * advertised by AP in the HE Operation Parameters field of the HE Operation
+ * information element.
+ */
+enum qca_wlan_twt_capa {
+	QCA_WLAN_TWT_CAPA_REQUESTOR = BIT(0),
+	QCA_WLAN_TWT_CAPA_RESPONDER = BIT(1),
+	QCA_WLAN_TWT_CAPA_BROADCAST = BIT(2),
+	QCA_WLAN_TWT_CAPA_FLEXIBLE =  BIT(3),
+	QCA_WLAN_TWT_CAPA_REQUIRED =  BIT(4),
+};
+
+/**
+ * enum qca_wlan_vendor_attr_twt_capability  - Represents attributes for TWT
+ * get capabilities request type. Used by QCA_WLAN_TWT_GET_CAPABILITIES TWT
+ * operation.
+ * @QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_MAC_ADDR: 6-byte MAC address
+ * Represents the MAC address of the peer for which the TWT capabilities
+ * are being queried. This is used in AP mode to represent the respective
+ * client. In STA mode, this is an optional parameter.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_SELF: (u16).
+ * Self TWT capabilities. Carries a bitmap of TWT capabilities specified in
+ * enum qca_wlan_twt_capa.
+ * @QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_PEER: (u16).
+ * Peer TWT capabilities. Carries a bitmap of TWT capabilities specified in
+ * enum qca_wlan_twt_capa.
+ */
+enum qca_wlan_vendor_attr_twt_capability {
+	QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_MAC_ADDR = 1,
+	QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_SELF = 2,
+	QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_PEER = 3,
+
+	/* keep last */
+	QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_MAX =
+	QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_AFTER_LAST - 1,
+};
+
+/**
  * enum qca_wlan_vendor_twt_setup_resp_type - Represents the response type by
  * the TWT responder
  *
@@ -9488,6 +10106,40 @@
  * include this attribute in response to the
  * QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO command if there is no connection
  * failure observed in the last attempted connection.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_RATE: u32, latest TX rate (Kbps)
+ * used by the station in its last TX frame while communicating to the AP in the
+ * connected state. When queried in the disconnected state, this represents the
+ * rate used by the STA in the last TX frame to the AP when it was connected.
+ * This attribute is used for STA mode only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_RIX: u32, used in STA mode only.
+ * This represents the rate index used by the STA for the last TX frame to the
+ * AP. When queried in the disconnected state, this gives the last RIX used by
+ * the STA in the last TX frame to the AP when it was connected.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TSF_OUT_OF_SYNC_COUNT: u32, used in STA
+ * mode only. This represents the number of times the STA TSF goes out of sync
+ * from the AP after the connection. If queried in the disconnected state, this
+ * gives the count of TSF out of sync for the last connection.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_TRIGGER_REASON: u32, used in STA
+ * mode only. This represents the roam trigger reason for the last roaming
+ * attempted by the firmware. This can be queried either in connected state or
+ * disconnected state. Each bit of this attribute represents the different
+ * roam trigger reason code which are defined in enum qca_vendor_roam_triggers.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON: u32, used in STA mode
+ * only. This represents the roam fail reason for the last failed roaming
+ * attempt by the firmware. Different roam failure reason codes are specified
+ * in enum qca_vendor_roam_fail_reasons. This can be queried either in
+ * connected state or disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON: u32, used in
+ * STA mode only. This represents the roam invoke fail reason for the last
+ * failed roam invoke. Different roam invoke failure reason codes
+ * are specified in enum qca_vendor_roam_invoke_fail_reasons. This can be
+ * queried either in connected state or disconnected state.
  */
 enum qca_wlan_vendor_attr_get_sta_info {
 	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_INVALID = 0,
@@ -9534,6 +10186,12 @@
 	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_MIC_ERROR_COUNT = 41,
 	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_REPLAY_COUNT = 42,
 	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE = 43,
+	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_RATE = 44,
+	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_RIX = 45,
+	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TSF_OUT_OF_SYNC_COUNT = 46,
+	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_TRIGGER_REASON = 47,
+	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON = 48,
+	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON = 49,
 
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST,
diff --git a/src/common/sae.c b/src/common/sae.c
index 057e1ce..372905d 100644
--- a/src/common/sae.c
+++ b/src/common/sae.c
@@ -1609,18 +1609,26 @@
 	 * octets). */
 	crypto_bignum_to_bin(tmp, val, sizeof(val), sae->tmp->order_len);
 	wpa_hexdump(MSG_DEBUG, "SAE: PMKID", val, SAE_PMKID_LEN);
-	if (!sae->pk &&
-	    sae_kdf_hash(hash_len, keyseed, "SAE KCK and PMK",
+
+#ifdef CONFIG_SAE_PK
+	if (sae->pk) {
+		if (sae_kdf_hash(hash_len, keyseed, "SAE-PK keys",
+				 val, sae->tmp->order_len,
+				 keys, 2 * hash_len + SAE_PMK_LEN) < 0)
+			goto fail;
+	} else {
+		if (sae_kdf_hash(hash_len, keyseed, "SAE KCK and PMK",
+				 val, sae->tmp->order_len,
+				 keys, hash_len + SAE_PMK_LEN) < 0)
+			goto fail;
+	}
+#else /* CONFIG_SAE_PK */
+	if (sae_kdf_hash(hash_len, keyseed, "SAE KCK and PMK",
 			 val, sae->tmp->order_len,
 			 keys, hash_len + SAE_PMK_LEN) < 0)
 		goto fail;
-#ifdef CONFIG_SAE_PK
-	if (sae->pk &&
-	    sae_kdf_hash(hash_len, keyseed, "SAE-PK keys",
-			 val, sae->tmp->order_len,
-			 keys, 2 * hash_len + SAE_PMK_LEN) < 0)
-		goto fail;
-#endif /* CONFIG_SAE_PK */
+#endif /* !CONFIG_SAE_PK */
+
 	forced_memzero(keyseed, sizeof(keyseed));
 	os_memcpy(sae->tmp->kck, keys, hash_len);
 	sae->tmp->kck_len = hash_len;
diff --git a/src/common/wpa_common.c b/src/common/wpa_common.c
index 82a5a17..2b8c7f6 100644
--- a/src/common/wpa_common.c
+++ b/src/common/wpa_common.c
@@ -333,6 +333,7 @@
  * @ptk: Buffer for pairwise transient key
  * @akmp: Negotiated AKM
  * @cipher: Negotiated pairwise cipher
+ * @kdk_len: The length in octets that should be derived for KDK
  * Returns: 0 on success, -1 on failure
  *
  * IEEE Std 802.11i-2004 - 8.5.1.2 Pairwise key hierarchy
@@ -348,12 +349,13 @@
 		   const u8 *addr1, const u8 *addr2,
 		   const u8 *nonce1, const u8 *nonce2,
 		   struct wpa_ptk *ptk, int akmp, int cipher,
-		   const u8 *z, size_t z_len)
+		   const u8 *z, size_t z_len, size_t kdk_len)
 {
 #define MAX_Z_LEN 66 /* with NIST P-521 */
 	u8 data[2 * ETH_ALEN + 2 * WPA_NONCE_LEN + MAX_Z_LEN];
 	size_t data_len = 2 * ETH_ALEN + 2 * WPA_NONCE_LEN;
-	u8 tmp[WPA_KCK_MAX_LEN + WPA_KEK_MAX_LEN + WPA_TK_MAX_LEN];
+	u8 tmp[WPA_KCK_MAX_LEN + WPA_KEK_MAX_LEN + WPA_TK_MAX_LEN +
+		WPA_KDK_MAX_LEN];
 	size_t ptk_len;
 #ifdef CONFIG_OWE
 	int owe_ptk_workaround = 0;
@@ -395,16 +397,24 @@
 		data_len += z_len;
 	}
 
+	if (kdk_len > WPA_KDK_MAX_LEN) {
+		wpa_printf(MSG_ERROR,
+			   "WPA: KDK len=%zu exceeds max supported len",
+			   kdk_len);
+		return -1;
+	}
+
 	ptk->kck_len = wpa_kck_len(akmp, pmk_len);
 	ptk->kek_len = wpa_kek_len(akmp, pmk_len);
 	ptk->tk_len = wpa_cipher_key_len(cipher);
+	ptk->kdk_len = kdk_len;
 	if (ptk->tk_len == 0) {
 		wpa_printf(MSG_ERROR,
 			   "WPA: Unsupported cipher (0x%x) used in PTK derivation",
 			   cipher);
 		return -1;
 	}
-	ptk_len = ptk->kck_len + ptk->kek_len + ptk->tk_len;
+	ptk_len = ptk->kck_len + ptk->kek_len + ptk->tk_len + ptk->kdk_len;
 
 	if (wpa_key_mgmt_sha384(akmp)) {
 #if defined(CONFIG_SUITEB192) || defined(CONFIG_FILS)
@@ -488,6 +498,12 @@
 	os_memcpy(ptk->tk, tmp + ptk->kck_len + ptk->kek_len, ptk->tk_len);
 	wpa_hexdump_key(MSG_DEBUG, "WPA: TK", ptk->tk, ptk->tk_len);
 
+	if (kdk_len) {
+		os_memcpy(ptk->kdk, tmp + ptk->kck_len + ptk->kek_len +
+			  ptk->tk_len, ptk->kdk_len);
+		wpa_hexdump_key(MSG_DEBUG, "WPA: KDK", ptk->kdk, ptk->kdk_len);
+	}
+
 	ptk->kek2_len = 0;
 	ptk->kck2_len = 0;
 
@@ -576,15 +592,16 @@
 		    const u8 *snonce, const u8 *anonce, const u8 *dhss,
 		    size_t dhss_len, struct wpa_ptk *ptk,
 		    u8 *ick, size_t *ick_len, int akmp, int cipher,
-		    u8 *fils_ft, size_t *fils_ft_len)
+		    u8 *fils_ft, size_t *fils_ft_len, size_t kdk_len)
 {
 	u8 *data, *pos;
 	size_t data_len;
 	u8 tmp[FILS_ICK_MAX_LEN + WPA_KEK_MAX_LEN + WPA_TK_MAX_LEN +
-	       FILS_FT_MAX_LEN];
+	       FILS_FT_MAX_LEN + WPA_KDK_MAX_LEN];
 	size_t key_data_len;
 	const char *label = "FILS PTK Derivation";
 	int ret = -1;
+	size_t offset;
 
 	/*
 	 * FILS-Key-Data = PRF-X(PMK, "FILS PTK Derivation",
@@ -595,6 +612,9 @@
 	 * If doing FT initial mobility domain association:
 	 * FILS-FT = L(FILS-Key-Data, ICK_bits + KEK_bits + TK_bits,
 	 *             FILS-FT_bits)
+	 * When a KDK is derived:
+	 * KDK = L(FILS-Key-Data, ICK_bits + KEK_bits + TK_bits + FILS-FT_bits,
+	 *	   KDK_bits)
 	 */
 	data_len = 2 * ETH_ALEN + 2 * FILS_NONCE_LEN + dhss_len;
 	data = os_malloc(data_len);
@@ -623,6 +643,19 @@
 		goto err;
 	key_data_len = *ick_len + ptk->kek_len + ptk->tk_len;
 
+	if (kdk_len) {
+		if (kdk_len > WPA_KDK_MAX_LEN) {
+			wpa_printf(MSG_ERROR, "FILS: KDK len=%zu too big",
+				   kdk_len);
+			goto err;
+		}
+
+		ptk->kdk_len = kdk_len;
+		key_data_len += kdk_len;
+	} else {
+		ptk->kdk_len = 0;
+	}
+
 	if (fils_ft && fils_ft_len) {
 		if (akmp == WPA_KEY_MGMT_FT_FILS_SHA256) {
 			*fils_ft_len = 32;
@@ -657,19 +690,27 @@
 	wpa_hexdump_key(MSG_DEBUG, "FILS: FILS-Key-Data", tmp, key_data_len);
 
 	os_memcpy(ick, tmp, *ick_len);
+	offset = *ick_len;
 	wpa_hexdump_key(MSG_DEBUG, "FILS: ICK", ick, *ick_len);
 
-	os_memcpy(ptk->kek, tmp + *ick_len, ptk->kek_len);
+	os_memcpy(ptk->kek, tmp + offset, ptk->kek_len);
 	wpa_hexdump_key(MSG_DEBUG, "FILS: KEK", ptk->kek, ptk->kek_len);
+	offset += ptk->kek_len;
 
-	os_memcpy(ptk->tk, tmp + *ick_len + ptk->kek_len, ptk->tk_len);
+	os_memcpy(ptk->tk, tmp + offset, ptk->tk_len);
 	wpa_hexdump_key(MSG_DEBUG, "FILS: TK", ptk->tk, ptk->tk_len);
+	offset += ptk->tk_len;
 
 	if (fils_ft && fils_ft_len) {
-		os_memcpy(fils_ft, tmp + *ick_len + ptk->kek_len + ptk->tk_len,
-			  *fils_ft_len);
+		os_memcpy(fils_ft, tmp + offset, *fils_ft_len);
 		wpa_hexdump_key(MSG_DEBUG, "FILS: FILS-FT",
 				fils_ft, *fils_ft_len);
+		offset += *fils_ft_len;
+	}
+
+	if (ptk->kdk_len) {
+		os_memcpy(ptk->kdk, tmp + offset, ptk->kdk_len);
+		wpa_hexdump_key(MSG_DEBUG, "FILS: KDK", ptk->kdk, ptk->kdk_len);
 	}
 
 	ptk->kek2_len = 0;
@@ -1127,6 +1168,266 @@
 #endif /* CONFIG_IEEE80211R */
 
 
+#ifdef CONFIG_PASN
+
+/*
+ * pasn_use_sha384 - Should SHA384 be used or SHA256
+ *
+ * @akmp: Authentication and key management protocol
+ * @cipher: The cipher suite
+ *
+ * According to IEEE P802.11az/D2.7, 12.12.7, the hash algorithm to use is the
+ * hash algorithm defined for the Base AKM (see Table 9-151 (AKM suite
+ * selectors)). When there is no Base AKM, the hash algorithm is selected based
+ * on the pairwise cipher suite provided in the RSNE by the AP in the second
+ * PASN frame. SHA-256 is used as the hash algorithm, except for the ciphers
+ * 00-0F-AC:9 and 00-0F-AC:10 for which SHA-384 is used.
+ */
+static bool pasn_use_sha384(int akmp, int cipher)
+{
+	return (akmp == WPA_KEY_MGMT_PASN && (cipher == WPA_CIPHER_CCMP_256 ||
+					      cipher == WPA_CIPHER_GCMP_256)) ||
+		wpa_key_mgmt_sha384(akmp);
+}
+
+
+/**
+ * pasn_pmk_to_ptk - Calculate PASN PTK from PMK, addresses, etc.
+ * @pmk: Pairwise master key
+ * @pmk_len: Length of PMK
+ * @spa: Suppplicant address
+ * @bssid: AP BSSID
+ * @dhss: Is the shared secret (DHss) derived from the PASN ephemeral key
+ *	exchange encoded as an octet string
+ * @dhss_len: The length of dhss in octets
+ * @ptk: Buffer for pairwise transient key
+ * @akmp: Negotiated AKM
+ * @cipher: Negotiated pairwise cipher
+ * @kdk_len: the length in octets that should be derived for HTLK. Can be zero.
+ * Returns: 0 on success, -1 on failure
+ */
+int pasn_pmk_to_ptk(const u8 *pmk, size_t pmk_len,
+		    const u8 *spa, const u8 *bssid,
+		    const u8 *dhss, size_t dhss_len,
+		    struct wpa_ptk *ptk, int akmp, int cipher,
+		    size_t kdk_len)
+{
+	u8 tmp[WPA_KCK_MAX_LEN + WPA_TK_MAX_LEN + WPA_KDK_MAX_LEN];
+	u8 *data;
+	size_t data_len, ptk_len;
+	int ret = -1;
+	const char *label = "PASN PTK Derivation";
+
+	if (!pmk || !pmk_len) {
+		wpa_printf(MSG_ERROR, "PASN: No PMK set for PTK derivation");
+		return -1;
+	}
+
+	if (!dhss || !dhss_len) {
+		wpa_printf(MSG_ERROR, "PASN: No DHss set for PTK derivation");
+		return -1;
+	}
+
+	/*
+	 * PASN-PTK = KDF(PMK, “PASN PTK Derivation”, SPA || BSSID || DHss)
+	 *
+	 * KCK = L(PASN-PTK, 0, 256)
+	 * TK = L(PASN-PTK, 256, TK_bits)
+	 * KDK = L(PASN-PTK, 256 + TK_bits, kdk_len * 8)
+	 */
+	data_len = 2 * ETH_ALEN + dhss_len;
+	data = os_zalloc(data_len);
+	if (!data)
+		return -1;
+
+	os_memcpy(data, spa, ETH_ALEN);
+	os_memcpy(data + ETH_ALEN, bssid, ETH_ALEN);
+	os_memcpy(data + 2 * ETH_ALEN, dhss, dhss_len);
+
+	ptk->kck_len = WPA_PASN_KCK_LEN;
+	ptk->tk_len = wpa_cipher_key_len(cipher);
+	ptk->kdk_len = kdk_len;
+	ptk->kek_len = 0;
+	ptk->kek2_len = 0;
+	ptk->kck2_len = 0;
+
+	if (ptk->tk_len == 0) {
+		wpa_printf(MSG_ERROR,
+			   "PASN: Unsupported cipher (0x%x) used in PTK derivation",
+			   cipher);
+		goto err;
+	}
+
+	ptk_len = ptk->kck_len + ptk->tk_len + ptk->kdk_len;
+	if (ptk_len > sizeof(tmp))
+		goto err;
+
+	if (pasn_use_sha384(akmp, cipher)) {
+		wpa_printf(MSG_DEBUG, "PASN: PTK derivation using SHA384");
+
+		if (sha384_prf(pmk, pmk_len, label, data, data_len, tmp,
+			       ptk_len) < 0)
+			goto err;
+	} else {
+		wpa_printf(MSG_DEBUG, "PASN: PTK derivation using SHA256");
+
+		if (sha256_prf(pmk, pmk_len, label, data, data_len, tmp,
+			       ptk_len) < 0)
+			goto err;
+	}
+
+	wpa_printf(MSG_DEBUG,
+		   "PASN: PTK derivation: SPA=" MACSTR " BSSID=" MACSTR,
+		   MAC2STR(spa), MAC2STR(bssid));
+
+	wpa_hexdump_key(MSG_DEBUG, "PASN: DHss", dhss, dhss_len);
+	wpa_hexdump_key(MSG_DEBUG, "PASN: PMK", pmk, pmk_len);
+	wpa_hexdump_key(MSG_DEBUG, "PASN: PASN-PTK", tmp, ptk_len);
+
+	os_memcpy(ptk->kck, tmp, WPA_PASN_KCK_LEN);
+	wpa_hexdump_key(MSG_DEBUG, "PASN: KCK:", ptk->kck, WPA_PASN_KCK_LEN);
+
+	os_memcpy(ptk->tk, tmp + WPA_PASN_KCK_LEN, ptk->tk_len);
+	wpa_hexdump_key(MSG_DEBUG, "PASN: TK:", ptk->tk, ptk->tk_len);
+
+	if (kdk_len) {
+		os_memcpy(ptk->kdk, tmp + WPA_PASN_KCK_LEN + ptk->tk_len,
+			  ptk->kdk_len);
+		wpa_hexdump_key(MSG_DEBUG, "PASN: KDK:",
+				ptk->kdk, ptk->kdk_len);
+	}
+
+	forced_memzero(tmp, sizeof(tmp));
+	ret = 0;
+err:
+	bin_clear_free(data, data_len);
+	return ret;
+}
+
+
+/*
+ * pasn_mic_len - Returns the MIC length for PASN authentication
+ */
+u8 pasn_mic_len(int akmp, int cipher)
+{
+	if (pasn_use_sha384(akmp, cipher))
+		return 24;
+
+	return 16;
+}
+
+
+/**
+ * pasn_mic - Calculate PASN MIC
+ * @kck: The key confirmation key for the PASN PTKSA
+ * @akmp: Negotiated AKM
+ * @cipher: Negotiated pairwise cipher
+ * @addr1: For the 2nd PASN frame supplicant address; for the 3rd frame the
+ *	BSSID
+ * @addr2: For the 2nd PASN frame the BSSID; for the 3rd frame the supplicant
+ *	address
+ * @data: For calculating the MIC for the 2nd PASN frame, this should hold the
+ *	Beacon frame RSNE + RSNXE. For calculating the MIC for the 3rd PASN
+ *	frame, this should hold the hash of the body of the PASN 1st frame.
+ * @data_len: The length of data
+ * @frame: The body of the PASN frame including the MIC element with the octets
+ *	in the MIC field of the MIC element set to 0.
+ * @frame_len: The length of frame
+ * @mic: Buffer to hold the MIC on success. Should be big enough to handle the
+ *	maximal MIC length
+ * Returns: 0 on success, -1 on failure
+ */
+int pasn_mic(const u8 *kck, int akmp, int cipher,
+	     const u8 *addr1, const u8 *addr2,
+	     const u8 *data, size_t data_len,
+	     const u8 *frame, size_t frame_len, u8 *mic)
+{
+	u8 *buf;
+	u8 hash[SHA384_MAC_LEN];
+	size_t buf_len = 2 * ETH_ALEN + data_len + frame_len;
+	int ret = -1;
+
+	if (!kck) {
+		wpa_printf(MSG_ERROR, "PASN: No KCK for MIC calculation");
+		return -1;
+	}
+
+	if (!data || !data_len) {
+		wpa_printf(MSG_ERROR, "PASN: invalid data for MIC calculation");
+		return -1;
+	}
+
+	if (!frame || !frame_len) {
+		wpa_printf(MSG_ERROR, "PASN: invalid data for MIC calculation");
+		return -1;
+	}
+
+	buf = os_zalloc(buf_len);
+	if (!buf)
+		return -1;
+
+	os_memcpy(buf, addr1, ETH_ALEN);
+	os_memcpy(buf + ETH_ALEN, addr2, ETH_ALEN);
+
+	wpa_hexdump_key(MSG_DEBUG, "PASN: MIC: data", data, data_len);
+	os_memcpy(buf + 2 * ETH_ALEN, data, data_len);
+
+	wpa_hexdump_key(MSG_DEBUG, "PASN: MIC: frame", frame, frame_len);
+	os_memcpy(buf + 2 * ETH_ALEN + data_len, frame, frame_len);
+
+	wpa_hexdump_key(MSG_DEBUG, "PASN: MIC: KCK", kck, WPA_PASN_KCK_LEN);
+	wpa_hexdump_key(MSG_DEBUG, "PASN: MIC: buf", buf, buf_len);
+
+	if (pasn_use_sha384(akmp, cipher)) {
+		wpa_printf(MSG_DEBUG, "PASN: MIC using HMAC-SHA384");
+
+		if (hmac_sha384(kck, WPA_PASN_KCK_LEN, buf, buf_len, hash))
+			goto err;
+
+		os_memcpy(mic, hash, 24);
+		wpa_hexdump_key(MSG_DEBUG, "PASN: MIC: mic: ", mic, 24);
+	} else {
+		wpa_printf(MSG_DEBUG, "PASN: MIC using HMAC-SHA256");
+
+		if (hmac_sha256(kck, WPA_PASN_KCK_LEN, buf, buf_len, hash))
+			goto err;
+
+		os_memcpy(mic, hash, 16);
+		wpa_hexdump_key(MSG_DEBUG, "PASN: MIC: mic: ", mic, 16);
+	}
+
+	ret = 0;
+err:
+	bin_clear_free(buf, buf_len);
+	return ret;
+}
+
+
+/**
+ * pasn_auth_frame_hash - Computes a hash of an Authentication frame body
+ * @akmp: Negotiated AKM
+ * @cipher: Negotiated pairwise cipher
+ * @data: Pointer to the Authentication frame body
+ * @len: Length of the Authentication frame body
+ * @hash: On return would hold the computed hash. Should be big enough to handle
+ *	SHA384.
+ * Returns: 0 on success, -1 on failure
+ */
+int pasn_auth_frame_hash(int akmp, int cipher, const u8 *data, size_t len,
+			 u8 *hash)
+{
+	if (pasn_use_sha384(akmp, cipher)) {
+		wpa_printf(MSG_DEBUG, "PASN: Frame hash using SHA-384");
+		return sha384_vector(1, &data, &len, hash);
+	} else {
+		wpa_printf(MSG_DEBUG, "PASN: Frame hash using SHA-256");
+		return sha256_vector(1, &data, &len, hash);
+	}
+}
+
+#endif /* CONFIG_PASN */
+
+
 static int rsn_selector_to_bitfield(const u8 *s)
 {
 	if (RSN_SELECTOR_GET(s) == RSN_CIPHER_SUITE_NONE)
@@ -1203,6 +1504,10 @@
 #endif /* CONFIG_DPP */
 	if (RSN_SELECTOR_GET(s) == RSN_AUTH_KEY_MGMT_OSEN)
 		return WPA_KEY_MGMT_OSEN;
+#ifdef CONFIG_PASN
+	if (RSN_SELECTOR_GET(s) == RSN_AUTH_KEY_MGMT_PASN)
+		return WPA_KEY_MGMT_PASN;
+#endif /* CONFIG_PASN */
 	return 0;
 }
 
@@ -1216,7 +1521,8 @@
 
 int wpa_cipher_valid_mgmt_group(int cipher)
 {
-	return cipher == WPA_CIPHER_AES_128_CMAC ||
+	return cipher == WPA_CIPHER_GTK_NOT_USED ||
+		cipher == WPA_CIPHER_AES_128_CMAC ||
 		cipher == WPA_CIPHER_BIP_GMAC_128 ||
 		cipher == WPA_CIPHER_BIP_GMAC_256 ||
 		cipher == WPA_CIPHER_BIP_CMAC_256;
@@ -1733,16 +2039,25 @@
 		      const u8 *snonce, const u8 *anonce,
 		      const u8 *sta_addr, const u8 *bssid,
 		      const u8 *pmk_r1_name,
-		      struct wpa_ptk *ptk, u8 *ptk_name, int akmp, int cipher)
+		      struct wpa_ptk *ptk, u8 *ptk_name, int akmp, int cipher,
+		      size_t kdk_len)
 {
 	u8 buf[2 * WPA_NONCE_LEN + 2 * ETH_ALEN];
 	u8 *pos, hash[32];
 	const u8 *addr[6];
 	size_t len[6];
-	u8 tmp[2 * WPA_KCK_MAX_LEN + 2 * WPA_KEK_MAX_LEN + WPA_TK_MAX_LEN];
+	u8 tmp[2 * WPA_KCK_MAX_LEN + 2 * WPA_KEK_MAX_LEN + WPA_TK_MAX_LEN +
+	       WPA_KDK_MAX_LEN];
 	size_t ptk_len, offset;
 	int use_sha384 = wpa_key_mgmt_sha384(akmp);
 
+	if (kdk_len > WPA_KDK_MAX_LEN) {
+		wpa_printf(MSG_ERROR,
+			   "FT: KDK len=%zu exceeds max supported len",
+			   kdk_len);
+		return -1;
+	}
+
 	/*
 	 * PTK = KDF-PTKLen(PMK-R1, "FT-PTK", SNonce || ANonce ||
 	 *                  BSSID || STA-ADDR)
@@ -1769,8 +2084,9 @@
 	ptk->kek_len = wpa_kek_len(akmp, PMK_LEN);
 	ptk->kek2_len = wpa_kek2_len(akmp);
 	ptk->tk_len = wpa_cipher_key_len(cipher);
+	ptk->kdk_len = kdk_len;
 	ptk_len = ptk->kck_len + ptk->kek_len + ptk->tk_len +
-		ptk->kck2_len + ptk->kek2_len;
+		ptk->kck2_len + ptk->kek2_len + ptk->kdk_len;
 
 #ifdef CONFIG_SHA384
 	if (use_sha384) {
@@ -1829,6 +2145,8 @@
 	os_memcpy(ptk->kck2, tmp + offset, ptk->kck2_len);
 	offset += ptk->kck2_len;
 	os_memcpy(ptk->kek2, tmp + offset, ptk->kek2_len);
+	offset += ptk->kek2_len;
+	os_memcpy(ptk->kdk, tmp + offset, ptk->kdk_len);
 
 	wpa_hexdump_key(MSG_DEBUG, "FT: KCK", ptk->kck, ptk->kck_len);
 	wpa_hexdump_key(MSG_DEBUG, "FT: KEK", ptk->kek, ptk->kek_len);
@@ -1838,6 +2156,9 @@
 	if (ptk->kek2_len)
 		wpa_hexdump_key(MSG_DEBUG, "FT: KEK2",
 				ptk->kek2, ptk->kek2_len);
+	if (ptk->kdk_len)
+		wpa_hexdump_key(MSG_DEBUG, "FT: KDK", ptk->kdk, ptk->kdk_len);
+
 	wpa_hexdump_key(MSG_DEBUG, "FT: TK", ptk->tk, ptk->tk_len);
 	wpa_hexdump(MSG_DEBUG, "FT: PTKName", ptk_name, WPA_PMK_NAME_LEN);
 
@@ -2071,6 +2392,8 @@
 		return "OWE";
 	case WPA_KEY_MGMT_DPP:
 		return "DPP";
+	case WPA_KEY_MGMT_PASN:
+		return "PASN";
 	default:
 		return "UNKNOWN";
 	}
@@ -2942,3 +3265,451 @@
 
 	return ret;
 }
+
+
+#ifdef CONFIG_PASN
+
+/*
+ * wpa_pasn_build_auth_header - Add the MAC header and initialize Authentication
+ * frame for PASN
+ *
+ * @buf: Buffer in which the header will be added
+ * @bssid: The BSSID of the AP
+ * @src: Source address
+ * @dst: Destination address
+ * @trans_seq: Authentication transaction sequence number
+ * @status: Authentication status
+ */
+void wpa_pasn_build_auth_header(struct wpabuf *buf, const u8 *bssid,
+				const u8 *src, const u8 *dst,
+				u8 trans_seq, u16 status)
+{
+	struct ieee80211_mgmt *auth;
+
+	wpa_printf(MSG_DEBUG, "PASN: Add authentication header. trans_seq=%u",
+		   trans_seq);
+
+	auth = wpabuf_put(buf, offsetof(struct ieee80211_mgmt,
+					u.auth.variable));
+
+	auth->frame_control = host_to_le16((WLAN_FC_TYPE_MGMT << 2) |
+					   (WLAN_FC_STYPE_AUTH << 4));
+
+	os_memcpy(auth->da, dst, ETH_ALEN);
+	os_memcpy(auth->sa, src, ETH_ALEN);
+	os_memcpy(auth->bssid, bssid, ETH_ALEN);
+	auth->seq_ctrl = 0;
+
+	auth->u.auth.auth_alg = host_to_le16(WLAN_AUTH_PASN);
+	auth->u.auth.auth_transaction = host_to_le16(trans_seq);
+	auth->u.auth.status_code = host_to_le16(status);
+}
+
+
+/*
+ * wpa_pasn_add_rsne - Add an RSNE for PASN authentication
+ * @buf: Buffer in which the IE will be added
+ * @pmkid: Optional PMKID. Can be NULL.
+ * @akmp: Authentication and key management protocol
+ * @cipher: The cipher suite
+ */
+int wpa_pasn_add_rsne(struct wpabuf *buf, const u8 *pmkid, int akmp, int cipher)
+{
+	struct rsn_ie_hdr *hdr;
+	u32 suite;
+	u16 capab;
+	u8 *pos;
+	u8 rsne_len;
+
+	wpa_printf(MSG_DEBUG, "PASN: Add RSNE");
+
+	rsne_len = sizeof(*hdr) + RSN_SELECTOR_LEN +
+		2 + RSN_SELECTOR_LEN + 2 + RSN_SELECTOR_LEN +
+		2 + RSN_SELECTOR_LEN + 2 + (pmkid ? PMKID_LEN : 0);
+
+	if (wpabuf_tailroom(buf) < rsne_len)
+		return -1;
+	hdr = wpabuf_put(buf, rsne_len);
+	hdr->elem_id = WLAN_EID_RSN;
+	hdr->len = rsne_len - 2;
+	WPA_PUT_LE16(hdr->version, RSN_VERSION);
+	pos = (u8 *) (hdr + 1);
+
+	/* Group addressed data is not allowed */
+	RSN_SELECTOR_PUT(pos, RSN_CIPHER_SUITE_NO_GROUP_ADDRESSED);
+	pos += RSN_SELECTOR_LEN;
+
+	/* Add the pairwise cipher */
+	WPA_PUT_LE16(pos, 1);
+	pos += 2;
+	suite = wpa_cipher_to_suite(WPA_PROTO_RSN, cipher);
+	RSN_SELECTOR_PUT(pos, suite);
+	pos += RSN_SELECTOR_LEN;
+
+	/* Add the AKM suite */
+	WPA_PUT_LE16(pos, 1);
+	pos += 2;
+
+	switch (akmp) {
+	case WPA_KEY_MGMT_PASN:
+		RSN_SELECTOR_PUT(pos, RSN_AUTH_KEY_MGMT_PASN);
+		break;
+#ifdef CONFIG_SAE
+	case WPA_KEY_MGMT_SAE:
+		RSN_SELECTOR_PUT(pos, RSN_AUTH_KEY_MGMT_SAE);
+		break;
+#endif /* CONFIG_SAE */
+#ifdef CONFIG_FILS
+	case WPA_KEY_MGMT_FILS_SHA256:
+		RSN_SELECTOR_PUT(pos, RSN_AUTH_KEY_MGMT_FILS_SHA256);
+		break;
+	case WPA_KEY_MGMT_FILS_SHA384:
+		RSN_SELECTOR_PUT(pos, RSN_AUTH_KEY_MGMT_FILS_SHA384);
+		break;
+#endif /* CONFIG_FILS */
+#ifdef CONFIG_IEEE80211R
+	case WPA_KEY_MGMT_FT_PSK:
+		RSN_SELECTOR_PUT(pos, RSN_AUTH_KEY_MGMT_FT_PSK);
+		break;
+	case WPA_KEY_MGMT_FT_IEEE8021X:
+		RSN_SELECTOR_PUT(pos, RSN_AUTH_KEY_MGMT_FT_802_1X);
+		break;
+	case WPA_KEY_MGMT_FT_IEEE8021X_SHA384:
+		RSN_SELECTOR_PUT(pos, RSN_AUTH_KEY_MGMT_FT_802_1X_SHA384);
+		break;
+#endif /* CONFIG_IEEE80211R */
+	default:
+		wpa_printf(MSG_ERROR, "PASN: Invalid AKMP=0x%x", akmp);
+		return -1;
+	}
+	pos += RSN_SELECTOR_LEN;
+
+	/* RSN Capabilities: PASN mandates both MFP capable and required */
+	capab = WPA_CAPABILITY_MFPC | WPA_CAPABILITY_MFPR;
+	WPA_PUT_LE16(pos, capab);
+	pos += 2;
+
+	if (pmkid) {
+		wpa_printf(MSG_DEBUG, "PASN: Adding PMKID");
+
+		WPA_PUT_LE16(pos, 1);
+		pos += 2;
+		os_memcpy(pos, pmkid, PMKID_LEN);
+		pos += PMKID_LEN;
+	} else {
+		WPA_PUT_LE16(pos, 0);
+		pos += 2;
+	}
+
+	/* Group addressed management is not allowed */
+	RSN_SELECTOR_PUT(pos, RSN_CIPHER_SUITE_NO_GROUP_ADDRESSED);
+
+	return 0;
+}
+
+
+/*
+ * wpa_pasn_add_parameter_ie - Add PASN Parameters IE for PASN authentication
+ * @buf: Buffer in which the IE will be added
+ * @pasn_group: Finite Cyclic Group ID for PASN authentication
+ * @wrapped_data_format: Format of the data in the Wrapped Data IE
+ * @pubkey: A buffer holding the local public key. Can be NULL
+ * @comeback: A buffer holding the comeback token. Can be NULL
+ * @after: If comeback is set, defined the comeback time in seconds. -1 to not
+ *	include the Comeback After field (frames from non-AP STA).
+ */
+void wpa_pasn_add_parameter_ie(struct wpabuf *buf, u16 pasn_group,
+			       u8 wrapped_data_format,
+			       struct wpabuf *pubkey,
+			       struct wpabuf *comeback, int after)
+{
+	struct pasn_parameter_ie *params;
+
+	wpa_printf(MSG_DEBUG, "PASN: Add PASN Parameters element");
+
+	params = wpabuf_put(buf, sizeof(*params));
+
+	params->id = WLAN_EID_EXTENSION;
+	params->len = sizeof(*params) - 2;
+	params->id_ext = WLAN_EID_EXT_PASN_PARAMS;
+	params->control = 0;
+	params->wrapped_data_format = wrapped_data_format;
+
+	if (comeback) {
+		wpa_printf(MSG_DEBUG, "PASN: Adding comeback data");
+
+		/*
+		 * 2 octets for the 'after' field + 1 octet for the length +
+		 * actual cookie data
+		 */
+		if (after >= 0)
+			params->len += 2;
+		params->len += 1 + wpabuf_len(comeback);
+		params->control |= WPA_PASN_CTRL_COMEBACK_INFO_PRESENT;
+
+		if (after >= 0)
+			wpabuf_put_le16(buf, after);
+		wpabuf_put_u8(buf, wpabuf_len(comeback));
+		wpabuf_put_buf(buf, comeback);
+	}
+
+	if (pubkey) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Adding public key and group ID %u",
+			   pasn_group);
+
+		/*
+		 * 2 octets for the finite cyclic group + 2 octets public key
+		 * length + the actual key
+		 */
+		params->len += 2 + 1 + wpabuf_len(pubkey);
+		params->control |= WPA_PASN_CTRL_GROUP_AND_KEY_PRESENT;
+
+		wpabuf_put_le16(buf, pasn_group);
+		wpabuf_put_u8(buf, wpabuf_len(pubkey));
+		wpabuf_put_buf(buf, pubkey);
+	}
+}
+
+/*
+ * wpa_pasn_add_wrapped_data - Add a Wrapped Data IE to PASN Authentication
+ * frame. If needed, the Wrapped Data IE would be fragmented.
+ *
+ * @buf: Buffer in which the IE will be added
+ * @wrapped_data_buf: Buffer holding the wrapped data
+ */
+int wpa_pasn_add_wrapped_data(struct wpabuf *buf,
+			      struct wpabuf *wrapped_data_buf)
+{
+	const u8 *data;
+	size_t data_len;
+	u8 len;
+
+	if (!wrapped_data_buf)
+		return 0;
+
+	wpa_printf(MSG_DEBUG, "PASN: Add wrapped data");
+
+	data = wpabuf_head_u8(wrapped_data_buf);
+	data_len = wpabuf_len(wrapped_data_buf);
+
+	/* nothing to add */
+	if (!data_len)
+		return 0;
+
+	if (data_len <= 254)
+		len = 1 + data_len;
+	else
+		len = 255;
+
+	if (wpabuf_tailroom(buf) < 3 + data_len)
+		return -1;
+
+	wpabuf_put_u8(buf, WLAN_EID_EXTENSION);
+	wpabuf_put_u8(buf, len);
+	wpabuf_put_u8(buf, WLAN_EID_EXT_WRAPPED_DATA);
+	wpabuf_put_data(buf, data, len - 1);
+
+	data += len - 1;
+	data_len -= len - 1;
+
+	while (data_len) {
+		if (wpabuf_tailroom(buf) < 1 + data_len)
+			return -1;
+		wpabuf_put_u8(buf, WLAN_EID_FRAGMENT);
+		len = data_len > 255 ? 255 : data_len;
+		wpabuf_put_u8(buf, len);
+		wpabuf_put_data(buf, data, len);
+		data += len;
+		data_len -= len;
+	}
+
+	return 0;
+}
+
+
+/*
+ * wpa_pasn_validate_rsne - Validate PSAN specific data of RSNE
+ * @data: Parsed representation of an RSNE
+ * Returns -1 for invalid data; otherwise 0
+ */
+int wpa_pasn_validate_rsne(const struct wpa_ie_data *data)
+{
+	u16 capab = WPA_CAPABILITY_MFPC | WPA_CAPABILITY_MFPR;
+
+	if (data->proto != WPA_PROTO_RSN)
+		return -1;
+
+	if ((data->capabilities & capab) != capab) {
+		wpa_printf(MSG_DEBUG, "PASN: Invalid RSNE capabilities");
+		return -1;
+	}
+
+	if (!data->has_group || data->group_cipher != WPA_CIPHER_GTK_NOT_USED) {
+		wpa_printf(MSG_DEBUG, "PASN: Invalid group data cipher");
+		return -1;
+	}
+
+	if (!data->has_pairwise || !data->pairwise_cipher ||
+	    (data->pairwise_cipher & (data->pairwise_cipher - 1))) {
+		wpa_printf(MSG_DEBUG, "PASN: No valid pairwise suite");
+		return -1;
+	}
+
+	switch (data->key_mgmt) {
+#ifdef CONFIG_SAE
+	case WPA_KEY_MGMT_SAE:
+	/* fall through */
+#endif /* CONFIG_SAE */
+#ifdef CONFIG_FILS
+	case WPA_KEY_MGMT_FILS_SHA256:
+	case WPA_KEY_MGMT_FILS_SHA384:
+	/* fall through */
+#endif /* CONFIG_FILS */
+#ifdef CONFIG_IEEE80211R
+	case WPA_KEY_MGMT_FT_PSK:
+	case WPA_KEY_MGMT_FT_IEEE8021X:
+	case WPA_KEY_MGMT_FT_IEEE8021X_SHA384:
+	/* fall through */
+#endif /* CONFIG_IEEE80211R */
+	case WPA_KEY_MGMT_PASN:
+		break;
+	default:
+		wpa_printf(MSG_ERROR, "PASN: invalid key_mgmt: 0x%0x",
+			   data->key_mgmt);
+		return -1;
+	}
+
+	if (data->mgmt_group_cipher != WPA_CIPHER_GTK_NOT_USED) {
+		wpa_printf(MSG_DEBUG, "PASN: Invalid group mgmt cipher");
+		return -1;
+	}
+
+	if (data->num_pmkid > 1) {
+		wpa_printf(MSG_DEBUG, "PASN: Invalid number of PMKIDs");
+		return -1;
+	}
+
+	return 0;
+}
+
+
+/*
+ * wpa_pasn_parse_parameter_ie - Validates PASN Parameters IE
+ * @data: Pointer to the PASN Parameters IE (starting with the EID).
+ * @len: Length of the data in the PASN Parameters IE
+ * @from_ap: Whether this was received from an AP
+ * @pasn_params: On successful return would hold the parsed PASN parameters.
+ * Returns: -1 for invalid data; otherwise 0
+ *
+ * Note: On successful return, the pointers in &pasn_params point to the data in
+ * the IE and are not locally allocated (so they should not be freed etc.).
+ */
+int wpa_pasn_parse_parameter_ie(const u8 *data, u8 len, bool from_ap,
+				struct wpa_pasn_params_data *pasn_params)
+{
+	struct pasn_parameter_ie *params = (struct pasn_parameter_ie *) data;
+	const u8 *pos = (const u8 *) (params + 1);
+
+	if (!pasn_params) {
+		wpa_printf(MSG_DEBUG, "PASN: Invalid params");
+		return -1;
+	}
+
+	if (!params || ((size_t) (params->len + 2) < sizeof(*params)) ||
+	    len < sizeof(*params) || params->len + 2 != len) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Invalid parameters IE. len=(%u, %u)",
+			   params ? params->len : 0, len);
+		return -1;
+	}
+
+	os_memset(pasn_params, 0, sizeof(*pasn_params));
+
+	switch (params->wrapped_data_format) {
+	case WPA_PASN_WRAPPED_DATA_NO:
+	case WPA_PASN_WRAPPED_DATA_SAE:
+	case WPA_PASN_WRAPPED_DATA_FILS_SK:
+	case WPA_PASN_WRAPPED_DATA_FT:
+		break;
+	default:
+		wpa_printf(MSG_DEBUG, "PASN: Invalid wrapped data format");
+		return -1;
+	}
+
+	pasn_params->wrapped_data_format = params->wrapped_data_format;
+
+	len -= sizeof(*params);
+
+	if (params->control & WPA_PASN_CTRL_COMEBACK_INFO_PRESENT) {
+		if (from_ap) {
+			if (len < 2) {
+				wpa_printf(MSG_DEBUG,
+					   "PASN: Invalid Parameters IE: Truncated Comeback After");
+				return -1;
+			}
+			pasn_params->after = WPA_GET_LE16(pos);
+			pos += 2;
+			len -= 2;
+		}
+
+		if (len < 1 || len < 1 + *pos) {
+			wpa_printf(MSG_DEBUG,
+				   "PASN: Invalid Parameters IE: comeback len");
+			return -1;
+		}
+
+		pasn_params->comeback_len = *pos++;
+		len--;
+		pasn_params->comeback = pos;
+		len -=  pasn_params->comeback_len;
+		pos += pasn_params->comeback_len;
+	}
+
+	if (params->control & WPA_PASN_CTRL_GROUP_AND_KEY_PRESENT) {
+		if (len < 3 || len < 3 + pos[2]) {
+			wpa_printf(MSG_DEBUG,
+				   "PASN: Invalid Parameters IE: group and key");
+			return -1;
+		}
+
+		pasn_params->group = WPA_GET_LE16(pos);
+		pos += 2;
+		len -= 2;
+		pasn_params->pubkey_len = *pos++;
+		len--;
+		pasn_params->pubkey = pos;
+		len -= pasn_params->pubkey_len;
+		pos += pasn_params->pubkey_len;
+	}
+
+	if (len) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Invalid Parameters IE. Bytes left=%u", len);
+		return -1;
+	}
+
+	return 0;
+}
+
+
+void wpa_pasn_add_rsnxe(struct wpabuf *buf, u16 capab)
+{
+	size_t flen;
+
+	flen = (capab & 0xff00) ? 2 : 1;
+	if (!capab)
+		return; /* no supported extended RSN capabilities */
+	if (wpabuf_tailroom(buf) < 2 + flen)
+		return;
+	capab |= flen - 1; /* bit 0-3 = Field length (n - 1) */
+
+	wpabuf_put_u8(buf, WLAN_EID_RSNX);
+	wpabuf_put_u8(buf, flen);
+	wpabuf_put_u8(buf, capab & 0x00ff);
+	capab >>= 8;
+	if (capab)
+		wpabuf_put_u8(buf, capab);
+}
+
+#endif /* CONFIG_PASN */
diff --git a/src/common/wpa_common.h b/src/common/wpa_common.h
index 065dc71..c31e1a0 100644
--- a/src/common/wpa_common.h
+++ b/src/common/wpa_common.h
@@ -19,6 +19,9 @@
 #define WPA_KEY_RSC_LEN 8
 #define WPA_GMK_LEN 32
 #define WPA_GTK_MAX_LEN 32
+#define WPA_PASN_PMK_LEN 32
+#define WPA_PASN_MAX_MIC_LEN 24
+#define WPA_MAX_RSNXE_LEN 4
 
 #define OWE_DH_GROUP 19
 
@@ -78,6 +81,9 @@
 #define RSN_AUTH_KEY_MGMT_FT_FILS_SHA256 RSN_SELECTOR(0x00, 0x0f, 0xac, 16)
 #define RSN_AUTH_KEY_MGMT_FT_FILS_SHA384 RSN_SELECTOR(0x00, 0x0f, 0xac, 17)
 #define RSN_AUTH_KEY_MGMT_OWE RSN_SELECTOR(0x00, 0x0f, 0xac, 18)
+
+#define RSN_AUTH_KEY_MGMT_PASN RSN_SELECTOR(0x00, 0x0f, 0xac, 21)
+
 #define RSN_AUTH_KEY_MGMT_CCKM RSN_SELECTOR(0x00, 0x40, 0x96, 0x00)
 #define RSN_AUTH_KEY_MGMT_OSEN RSN_SELECTOR(0x50, 0x6f, 0x9a, 0x01)
 #define RSN_AUTH_KEY_MGMT_DPP RSN_SELECTOR(0x50, 0x6f, 0x9a, 0x02)
@@ -211,8 +217,11 @@
 #define WPA_KCK_MAX_LEN 32
 #define WPA_KEK_MAX_LEN 64
 #define WPA_TK_MAX_LEN 32
+#define WPA_KDK_MAX_LEN 32
 #define FILS_ICK_MAX_LEN 48
 #define FILS_FT_MAX_LEN 48
+#define WPA_PASN_KCK_LEN 32
+#define WPA_PASN_MIC_MAX_LEN 24
 
 /**
  * struct wpa_ptk - WPA Pairwise Transient Key
@@ -224,11 +233,13 @@
 	u8 tk[WPA_TK_MAX_LEN]; /* Temporal Key (TK) */
 	u8 kck2[WPA_KCK_MAX_LEN]; /* FT reasoc Key Confirmation Key (KCK2) */
 	u8 kek2[WPA_KEK_MAX_LEN]; /* FT reassoc Key Encryption Key (KEK2) */
+	u8 kdk[WPA_KDK_MAX_LEN]; /* Key Derivation Key */
 	size_t kck_len;
 	size_t kek_len;
 	size_t tk_len;
 	size_t kck2_len;
 	size_t kek2_len;
+	size_t kdk_len;
 	int installed; /* 1 if key has already been installed to driver */
 };
 
@@ -378,7 +389,7 @@
 		   const u8 *addr1, const u8 *addr2,
 		   const u8 *nonce1, const u8 *nonce2,
 		   struct wpa_ptk *ptk, int akmp, int cipher,
-		   const u8 *z, size_t z_len);
+		   const u8 *z, size_t z_len, size_t kdk_len);
 int fils_rmsk_to_pmk(int akmp, const u8 *rmsk, size_t rmsk_len,
 		     const u8 *snonce, const u8 *anonce, const u8 *dh_ss,
 		     size_t dh_ss_len, u8 *pmk, size_t *pmk_len);
@@ -388,7 +399,7 @@
 		    const u8 *snonce, const u8 *anonce, const u8 *dhss,
 		    size_t dhss_len, struct wpa_ptk *ptk,
 		    u8 *ick, size_t *ick_len, int akmp, int cipher,
-		    u8 *fils_ft, size_t *fils_ft_len);
+		    u8 *fils_ft, size_t *fils_ft_len, size_t kdk_len);
 int fils_key_auth_sk(const u8 *ick, size_t ick_len, const u8 *snonce,
 		     const u8 *anonce, const u8 *sta_addr, const u8 *bssid,
 		     const u8 *g_sta, size_t g_sta_len,
@@ -419,7 +430,8 @@
 int wpa_pmk_r1_to_ptk(const u8 *pmk_r1, size_t pmk_r1_len, const u8 *snonce,
 		      const u8 *anonce, const u8 *sta_addr, const u8 *bssid,
 		      const u8 *pmk_r1_name,
-		      struct wpa_ptk *ptk, u8 *ptk_name, int akmp, int cipher);
+		      struct wpa_ptk *ptk, u8 *ptk_name, int akmp, int cipher,
+		      size_t kdk_len);
 #endif /* CONFIG_IEEE80211R */
 
 struct wpa_ie_data {
@@ -507,6 +519,33 @@
 	size_t rsnxe_len;
 };
 
+/* IEEE P802.11az/D2.6 - 9.4.2.303 PASN Parameters element */
+#define WPA_PASN_CTRL_COMEBACK_INFO_PRESENT BIT(0)
+#define WPA_PASN_CTRL_GROUP_AND_KEY_PRESENT BIT(1)
+
+#define WPA_PASN_WRAPPED_DATA_NO      0
+#define WPA_PASN_WRAPPED_DATA_FT      1
+#define WPA_PASN_WRAPPED_DATA_FILS_SK 2
+#define WPA_PASN_WRAPPED_DATA_SAE     3
+
+struct pasn_parameter_ie {
+	u8 id;
+	u8 len;
+	u8 id_ext;
+	u8 control; /* WPA_PASN_CTRL_* */
+	u8 wrapped_data_format; /* WPA_PASN_WRAPPED_DATA_* */
+} STRUCT_PACKED;
+
+struct wpa_pasn_params_data {
+	u8 wrapped_data_format;
+	u16 after;
+	u8 comeback_len;
+	const u8 *comeback;
+	u16 group;
+	u8 pubkey_len;
+	const u8 *pubkey;
+};
+
 int wpa_ft_parse_ies(const u8 *ies, size_t ies_len, struct wpa_ft_ies *parse,
 		     int use_sha384);
 
@@ -591,4 +630,41 @@
 int wpa_use_aes_key_wrap(int akmp);
 int fils_domain_name_hash(const char *domain, u8 *hash);
 
+int pasn_pmk_to_ptk(const u8 *pmk, size_t pmk_len,
+		    const u8 *spa, const u8 *bssid,
+		    const u8 *dhss, size_t dhss_len,
+		    struct wpa_ptk *ptk, int akmp, int cipher,
+		    size_t kdk_len);
+
+u8 pasn_mic_len(int akmp, int cipher);
+
+int pasn_mic(const u8 *kck, int akmp, int cipher,
+	     const u8 *addr1, const u8 *addr2,
+	     const u8 *data, size_t data_len,
+	     const u8 *frame, size_t frame_len, u8 *mic);
+
+int pasn_auth_frame_hash(int akmp, int cipher, const u8 *data, size_t len,
+			 u8 *hash);
+
+void wpa_pasn_build_auth_header(struct wpabuf *buf, const u8 *bssid,
+				const u8 *src, const u8 *dst,
+				u8 trans_seq, u16 status);
+
+int wpa_pasn_add_rsne(struct wpabuf *buf, const u8 *pmkid,
+		      int akmp, int cipher);
+
+void wpa_pasn_add_parameter_ie(struct wpabuf *buf, u16 pasn_group,
+			       u8 wrapped_data_format,
+			       struct wpabuf *pubkey,
+			       struct wpabuf *comeback, int after);
+
+int wpa_pasn_add_wrapped_data(struct wpabuf *buf,
+			      struct wpabuf *wrapped_data_buf);
+
+int wpa_pasn_validate_rsne(const struct wpa_ie_data *data);
+int wpa_pasn_parse_parameter_ie(const u8 *data, u8 len, bool from_ap,
+				struct wpa_pasn_params_data *pasn_params);
+
+void wpa_pasn_add_rsnxe(struct wpabuf *buf, u16 capab);
+
 #endif /* WPA_COMMON_H */
diff --git a/src/common/wpa_ctrl.h b/src/common/wpa_ctrl.h
index acc2d6c..126a789 100644
--- a/src/common/wpa_ctrl.h
+++ b/src/common/wpa_ctrl.h
@@ -271,7 +271,7 @@
 #define P2P_EVENT_P2PS_PROVISION_DONE "P2PS-PROV-DONE "
 
 #define INTERWORKING_AP "INTERWORKING-AP "
-#define INTERWORKING_BLACKLISTED "INTERWORKING-BLACKLISTED "
+#define INTERWORKING_EXCLUDED "INTERWORKING-BLACKLISTED "
 #define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH "
 #define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED "
 #define INTERWORKING_SELECTED "INTERWORKING-SELECTED "
@@ -404,10 +404,16 @@
  * frame=<saqueryreq/saqueryresp> error=<error string> */
 #define OCV_FAILURE "OCV-FAILURE "
 
+/* Event triggered for received management frame */
+#define AP_MGMT_FRAME_RECEIVED "AP-MGMT-FRAME-RECEIVED "
+
 #ifndef BIT
 #define BIT(x) (1U << (x))
 #endif
 
+/* PASN authentication status */
+#define PASN_AUTH_STATUS "PASN-AUTH-STATUS "
+
 /* BSS command information masks */
 
 #define WPA_BSS_MASK_ALL		0xFFFDFFFF
diff --git a/src/crypto/tls_openssl.c b/src/crypto/tls_openssl.c
index a789455..928cc97 100644
--- a/src/crypto/tls_openssl.c
+++ b/src/crypto/tls_openssl.c
@@ -1059,6 +1059,8 @@
 	SSL_CTX_set_options(ssl, SSL_OP_NO_SSLv2);
 	SSL_CTX_set_options(ssl, SSL_OP_NO_SSLv3);
 
+	SSL_CTX_set_mode(ssl, SSL_MODE_AUTO_RETRY);
+
 #ifdef SSL_MODE_NO_AUTO_CHAIN
 	/* Number of deployed use cases assume the default OpenSSL behavior of
 	 * auto chaining the local certificate is in use. BoringSSL removed this
@@ -4561,10 +4563,18 @@
 		return NULL;
 	res = SSL_read(conn->ssl, wpabuf_mhead(buf), wpabuf_size(buf));
 	if (res < 0) {
-		tls_show_errors(MSG_INFO, __func__,
-				"Decryption failed - SSL_read");
-		wpabuf_free(buf);
-		return NULL;
+		int err = SSL_get_error(conn->ssl, res);
+
+		if (err == SSL_ERROR_WANT_READ) {
+			wpa_printf(MSG_DEBUG,
+				   "SSL: SSL_connect - want more data");
+			res = 0;
+		} else {
+			tls_show_errors(MSG_INFO, __func__,
+					"Decryption failed - SSL_read");
+			wpabuf_free(buf);
+			return NULL;
+		}
 	}
 	wpabuf_put(buf, res);
 
@@ -5341,6 +5351,9 @@
 	ASN1_INTEGER *ser;
 	char serial_num[128];
 
+	if (!cert)
+		return;
+
 	X509_NAME_oneline(X509_get_subject_name(cert), buf, sizeof(buf));
 
 	ser = X509_get_serialNumber(cert);
diff --git a/src/crypto/tls_wolfssl.c b/src/crypto/tls_wolfssl.c
index b8a7665..cf482bf 100644
--- a/src/crypto/tls_wolfssl.c
+++ b/src/crypto/tls_wolfssl.c
@@ -469,7 +469,7 @@
 	if (client_cert_blob) {
 		if (wolfSSL_use_certificate_chain_buffer_format(
 			    conn->ssl, client_cert_blob, blob_len,
-			    SSL_FILETYPE_ASN1) < 0) {
+			    SSL_FILETYPE_ASN1) != SSL_SUCCESS) {
 			wpa_printf(MSG_INFO,
 				   "SSL: use client cert DER blob failed");
 			return -1;
@@ -479,13 +479,13 @@
 	}
 
 	if (client_cert) {
-		if (wolfSSL_use_certificate_chain_file(conn->ssl,
-						       client_cert) < 0) {
+		if (wolfSSL_use_certificate_chain_file(
+			    conn->ssl, client_cert) != SSL_SUCCESS) {
 			wpa_printf(MSG_INFO,
 				   "SSL: use client cert PEM file failed");
 			if (wolfSSL_use_certificate_chain_file_format(
 				    conn->ssl, client_cert,
-				    SSL_FILETYPE_ASN1) < 0) {
+				    SSL_FILETYPE_ASN1) != SSL_SUCCESS) {
 				wpa_printf(MSG_INFO,
 					   "SSL: use client cert DER file failed");
 				return -1;
@@ -534,7 +534,7 @@
 	if (private_key_blob) {
 		if (wolfSSL_use_PrivateKey_buffer(conn->ssl,
 						  private_key_blob, blob_len,
-						  SSL_FILETYPE_ASN1) < 0) {
+						  SSL_FILETYPE_ASN1) <= 0) {
 			wpa_printf(MSG_INFO,
 				   "SSL: use private DER blob failed");
 		} else {
@@ -545,11 +545,11 @@
 
 	if (!ok && private_key) {
 		if (wolfSSL_use_PrivateKey_file(conn->ssl, private_key,
-						SSL_FILETYPE_PEM) < 0) {
+						SSL_FILETYPE_PEM) <= 0) {
 			wpa_printf(MSG_INFO,
 				   "SSL: use private key PEM file failed");
 			if (wolfSSL_use_PrivateKey_file(conn->ssl, private_key,
-							SSL_FILETYPE_ASN1) < 0)
+							SSL_FILETYPE_ASN1) <= 0)
 			{
 				wpa_printf(MSG_INFO,
 					   "SSL: use private key DER file failed");
diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index e8defab..5b2c71c 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -1189,6 +1189,14 @@
 	 * fils_erp_rrk_len - Length of fils_erp_rrk in bytes
 	 */
 	size_t fils_erp_rrk_len;
+
+	/**
+	 * sae_pwe - SAE mechanism for PWE derivation
+	 * 0 = hunting-and-pecking loop only
+	 * 1 = hash-to-element only
+	 * 2 = both hunting-and-pecking loop and hash-to-element enabled
+	 */
+	int sae_pwe;
 };
 
 enum hide_ssid {
@@ -1256,14 +1264,14 @@
 	 *
 	 * This parameter can be used to set a specific Beacon frame data rate
 	 * for the BSS. The interpretation of this value depends on the
-	 * rate_type (legacy: in 100 kbps units, HT: HT-MCS, VHT: VHT-MCS). If
-	 * beacon_rate == 0 and rate_type == 0 (BEACON_RATE_LEGACY), the default
-	 * Beacon frame data rate is used.
+	 * rate_type (legacy: in 100 kbps units, HT: HT-MCS, VHT: VHT-MCS,
+	 * HE: HE-MCS). If beacon_rate == 0 and rate_type == 0
+	 * (BEACON_RATE_LEGACY), the default Beacon frame data rate is used.
 	 */
 	unsigned int beacon_rate;
 
 	/**
-	 * beacon_rate_type: Beacon data rate type (legacy/HT/VHT)
+	 * beacon_rate_type: Beacon data rate type (legacy/HT/VHT/HE)
 	 */
 	enum beacon_rate_type rate_type;
 
@@ -1475,19 +1483,36 @@
 	const struct wpabuf *civic;
 
 	/**
-	 * he_spr - Whether Spatial Reuse is enabled
+	 * he_spr_ctrl - Spatial Reuse control field of SPR element
 	 */
-	 int he_spr;
+	u8 he_spr_ctrl;
+
+	/**
+	 * he_spr_non_srg_obss_pd_max_offset - Non-SRG Maximum TX power offset
+	 */
+	u8 he_spr_non_srg_obss_pd_max_offset;
 
 	/**
 	 * he_spr_srg_obss_pd_min_offset - Minimum TX power offset
 	 */
-	 int he_spr_srg_obss_pd_min_offset;
+	u8 he_spr_srg_obss_pd_min_offset;
 
 	/**
 	 * he_spr_srg_obss_pd_max_offset - Maximum TX power offset
 	 */
-	 int he_spr_srg_obss_pd_max_offset;
+	u8 he_spr_srg_obss_pd_max_offset;
+
+	/**
+	 * he_spr_bss_color_bitmap - BSS color values used by members of the
+	 * SRG.
+	 */
+	u8 he_spr_bss_color_bitmap[8];
+
+	/**
+	 * he_spr_partial_bssid_bitmap - Partial BSSID values used by members
+	 * of the SRG.
+	 */
+	u8 he_spr_partial_bssid_bitmap[8];
 
 	/**
 	 * he_bss_color - Whether the BSS Color is disabled
@@ -1508,6 +1533,49 @@
 	 * twt_responder - Whether Target Wait Time responder is enabled
 	 */
 	int twt_responder;
+
+	/**
+	 * sae_pwe - SAE mechanism for PWE derivation
+	 * 0 = hunting-and-pecking loop only
+	 * 1 = hash-to-element only
+	 * 2 = both hunting-and-pecking loop and hash-to-element enabled
+	 */
+	int sae_pwe;
+
+	/**
+	 * FILS Discovery frame minimum interval in TUs
+	 */
+	u32 fd_min_int;
+
+	/**
+	 * FILS Discovery frame maximum interval in TUs (0 = FD frame disabled)
+	 */
+	u32 fd_max_int;
+
+	/**
+	 * FILS Discovery frame template data
+	 */
+	u8 *fd_frame_tmpl;
+
+	/**
+	 * FILS Discovery frame template length
+	 */
+	size_t fd_frame_tmpl_len;
+
+	/**
+	 * Unsolicited broadcast Probe Response interval in TUs
+	 */
+	unsigned int unsol_bcast_probe_resp_interval;
+
+	/**
+	 * Unsolicited broadcast Probe Response template data
+	 */
+	u8 *unsol_bcast_probe_resp_tmpl;
+
+	/**
+	 * Unsolicited broadcast Probe Response template length
+	 */
+	size_t unsol_bcast_probe_resp_tmpl_len;
 };
 
 struct wpa_driver_mesh_bss_params {
@@ -1543,6 +1611,7 @@
 #define WPA_DRIVER_MESH_FLAG_SAE_AUTH	0x00000004
 #define WPA_DRIVER_MESH_FLAG_AMPE	0x00000008
 	unsigned int flags;
+	bool handle_dfs;
 };
 
 struct wpa_driver_set_key_params {
@@ -1933,6 +2002,23 @@
 #define WPA_DRIVER_FLAGS2_CONTROL_PORT_RX	0x0000000000000001ULL
 /** Driver supports TX status reports for EAPOL frames through control port */
 #define WPA_DRIVER_FLAGS2_CONTROL_PORT_TX_STATUS 0x0000000000000002ULL
+/** Driver supports secure LTF */
+#define WPA_DRIVER_FLAGS2_SEC_LTF		0x0000000000000004ULL
+/** Driver supports secure RTT measurement exchange */
+#define WPA_DRIVER_FLAGS2_SEC_RTT		0x0000000000000008ULL
+/**
+ * Driver supports protection of range negotiation and measurement management
+ * frames
+ */
+#define WPA_DRIVER_FLAGS2_PROT_RANGE_NEG	0x0000000000000010ULL
+/** Driver supports Beacon frame TX rate configuration (HE rates) */
+#define WPA_DRIVER_FLAGS2_BEACON_RATE_HE	0x0000000000000020ULL
+/** Driver supports Beacon protection only in client mode */
+#define WPA_DRIVER_FLAGS2_BEACON_PROTECTION_CLIENT 0x0000000000000040ULL
+/** Driver supports Operating Channel Validation */
+#define WPA_DRIVER_FLAGS2_OCV			0x0000000000000080ULL
+/** Driver expects user space implementation of SME in AP mode */
+#define WPA_DRIVER_FLAGS2_AP_SME		0x0000000000000100ULL
 	u64 flags2;
 
 #define FULL_AP_CLIENT_STATE_SUPP(drv_flags) \
@@ -2432,6 +2518,13 @@
 	const u8 *pmkid;
 };
 
+/* enum nested_attr - Used to specify if subcommand uses nested attributes */
+enum nested_attr {
+	NESTED_ATTR_NOT_USED = 0,
+	NESTED_ATTR_USED = 1,
+	NESTED_ATTR_UNSPECIFIED = 2,
+};
+
 /**
  * struct wpa_driver_ops - Driver interface API definition
  *
@@ -3717,6 +3810,8 @@
 	 * @priv: Private driver interface data
 	 * @vendor_id: Vendor id
 	 * @subcmd: Vendor command id
+	 * @nested_attr_flag: Specifies if vendor subcommand uses nested
+	 *	attributes or not
 	 * @data: Vendor command parameters (%NULL if no parameters)
 	 * @data_len: Data length
 	 * @buf: Return buffer (%NULL to ignore reply)
@@ -3724,9 +3819,10 @@
 	 *
 	 * This function handles vendor specific commands that are passed to
 	 * the driver/device. The command is identified by vendor id and
-	 * command id. Parameters can be passed as argument to the command
-	 * in the data buffer. Reply (if any) will be filled in the supplied
-	 * return buffer.
+	 * command id. The nested_attr_flag specifies whether the subcommand
+	 * uses nested attributes or not. Parameters can be passed
+	 * as argument to the command in the data buffer. Reply (if any) will be
+	 * filled in the supplied return buffer.
 	 *
 	 * The exact driver behavior is driver interface and vendor specific. As
 	 * an example, this will be converted to a vendor specific cfg80211
@@ -3734,6 +3830,7 @@
 	 */
 	int (*vendor_cmd)(void *priv, unsigned int vendor_id,
 			  unsigned int subcmd, const u8 *data, size_t data_len,
+			  enum nested_attr nested_attr_flag,
 			  struct wpabuf *buf);
 
 	/**
@@ -4249,12 +4346,12 @@
 	int (*do_acs)(void *priv, struct drv_acs_params *params);
 
 	/**
-	 * set_band - Notify driver of band selection
+	 * set_band - Notify driver of band(s) selection
 	 * @priv: Private driver interface data
-	 * @band: The selected band(s)
+	 * @band_mask: The selected band(s) bit mask (from enum set_band)
 	 * Returns 0 on success, -1 on failure
 	 */
-	int (*set_band)(void *priv, enum set_band band);
+	int (*set_band)(void *priv, u32 band_mask);
 
 	/**
 	 * get_pref_freq_list - Get preferred frequency list for an interface
@@ -5051,6 +5148,34 @@
 #define SURVEY_HAS_CHAN_TIME_RX BIT(3)
 #define SURVEY_HAS_CHAN_TIME_TX BIT(4)
 
+/**
+ * enum sta_connect_fail_reason_codes - STA connect failure reason code values
+ * @STA_CONNECT_FAIL_REASON_UNSPECIFIED: No reason code specified for
+ *	connection failure.
+ * @STA_CONNECT_FAIL_REASON_NO_BSS_FOUND: No Probe Response frame received
+ *	for unicast Probe Request frame.
+ * @STA_CONNECT_FAIL_REASON_AUTH_TX_FAIL: STA failed to send auth request.
+ * @STA_CONNECT_FAIL_REASON_AUTH_NO_ACK_RECEIVED: AP didn't send ACK for
+ *	auth request.
+ * @STA_CONNECT_FAIL_REASON_AUTH_NO_RESP_RECEIVED: Auth response is not
+ *	received from AP.
+ * @STA_CONNECT_FAIL_REASON_ASSOC_REQ_TX_FAIL: STA failed to send
+ *	Association Request frame.
+ * @STA_CONNECT_FAIL_REASON_ASSOC_NO_ACK_RECEIVED: AP didn't send ACK for
+ *	Association Request frame.
+ * @STA_CONNECT_FAIL_REASON_ASSOC_NO_RESP_RECEIVED: Association Response
+ *	frame is not received from AP.
+ */
+enum sta_connect_fail_reason_codes {
+	STA_CONNECT_FAIL_REASON_UNSPECIFIED = 0,
+	STA_CONNECT_FAIL_REASON_NO_BSS_FOUND = 1,
+	STA_CONNECT_FAIL_REASON_AUTH_TX_FAIL = 2,
+	STA_CONNECT_FAIL_REASON_AUTH_NO_ACK_RECEIVED = 3,
+	STA_CONNECT_FAIL_REASON_AUTH_NO_RESP_RECEIVED = 4,
+	STA_CONNECT_FAIL_REASON_ASSOC_REQ_TX_FAIL = 5,
+	STA_CONNECT_FAIL_REASON_ASSOC_NO_ACK_RECEIVED = 6,
+	STA_CONNECT_FAIL_REASON_ASSOC_NO_RESP_RECEIVED = 7,
+};
 
 /**
  * union wpa_event_data - Additional data for wpa_supplicant_event() calls
@@ -5452,6 +5577,11 @@
 		 * FILS ERP messages
 		 */
 		u16 fils_erp_next_seq_num;
+
+		/**
+		 * reason_code - Connection failure reason code from the driver
+		 */
+		enum sta_connect_fail_reason_codes reason_code;
 	} assoc_reject;
 
 	struct timeout_event {
diff --git a/src/drivers/driver_bsd.c b/src/drivers/driver_bsd.c
index a29d2c8..00d970a 100644
--- a/src/drivers/driver_bsd.c
+++ b/src/drivers/driver_bsd.c
@@ -16,7 +16,9 @@
 #include "common/ieee802_11_defs.h"
 #include "common/wpa_common.h"
 
+#include <ifaddrs.h>
 #include <net/if.h>
+#include <net/if_dl.h>
 #include <net/if_media.h>
 
 #ifdef __NetBSD__
@@ -615,6 +617,108 @@
 	return 0;
 }
 
+#ifdef SO_RERROR
+static void
+bsd_route_overflow(int sock, void *ctx, struct bsd_driver_global *global)
+{
+	char event_buf[2048]; /* max size of a single route(4) msg */
+	int n;
+	struct ifaddrs *ifaddrs, *ifa;
+	struct bsd_driver_data *drv;
+	struct sockaddr_dl *sdl;
+	union wpa_event_data event;
+
+	/* We need to match the system state, so drain the route
+	 * socket to avoid stale messages. */
+	do {
+		n = read(sock, event_buf, sizeof(event_buf));
+	} while (n != -1 || errno == ENOBUFS);
+
+	if (getifaddrs(&ifaddrs) == -1) {
+		wpa_printf(MSG_ERROR, "%s getifaddrs() failed: %s",
+			   __func__, strerror(errno));
+		return;
+	}
+
+	/* add or update existing interfaces */
+	for (ifa = ifaddrs; ifa != NULL; ifa = ifa->ifa_next) {
+		if (ifa->ifa_addr == NULL ||
+		    ifa->ifa_addr->sa_family != AF_LINK)
+			continue;
+		sdl = (struct sockaddr_dl *) (void *) ifa->ifa_addr;
+		drv = bsd_get_drvname(global, ifa->ifa_name);
+		if (drv != NULL &&
+		    (drv->ifindex != sdl->sdl_index || drv->if_removed)) {
+			wpa_printf(MSG_DEBUG,
+				   "RTM_IFANNOUNCE: Interface '%s' added",
+				   drv->ifname);
+			drv->ifindex = sdl->sdl_index;
+			drv->if_removed = 0;
+			event.interface_status.ievent = EVENT_INTERFACE_ADDED;
+			os_strlcpy(event.interface_status.ifname, ifa->ifa_name,
+				   sizeof(event.interface_status.ifname));
+			wpa_supplicant_event(drv->ctx, EVENT_INTERFACE_STATUS,
+					     &event);
+		}
+		if (!drv &&
+		    (drv = bsd_get_drvindex(global, sdl->sdl_index)) != NULL) {
+			/* Driver name is invalid */
+			wpa_printf(MSG_DEBUG,
+				   "RTM_IFANNOUNCE: Interface '%s' removed",
+				   drv->ifname);
+			drv->if_removed = 1;
+			event.interface_status.ievent = EVENT_INTERFACE_REMOVED;
+			os_strlcpy(event.interface_status.ifname, drv->ifname,
+				   sizeof(event.interface_status.ifname));
+			wpa_supplicant_event(drv->ctx, EVENT_INTERFACE_STATUS,
+					     &event);
+		}
+	}
+
+	/* punt missing interfaces and update flags */
+	dl_list_for_each(drv, &global->ifaces, struct bsd_driver_data, list) {
+		for (ifa = ifaddrs; ifa != NULL; ifa = ifa->ifa_next) {
+			if (ifa->ifa_addr == NULL ||
+			    ifa->ifa_addr->sa_family != AF_LINK)
+				continue;
+			sdl = (struct sockaddr_dl *) (void *) ifa->ifa_addr;
+			if (os_strcmp(drv->ifname, ifa->ifa_name) == 0)
+				break;
+		}
+		if (ifa == NULL && !drv->if_removed) {
+			wpa_printf(MSG_DEBUG,
+				   "RTM_IFANNOUNCE: Interface '%s' removed",
+				   drv->ifname);
+			drv->if_removed = 1;
+			event.interface_status.ievent = EVENT_INTERFACE_REMOVED;
+			os_strlcpy(event.interface_status.ifname, drv->ifname,
+				   sizeof(event.interface_status.ifname));
+			wpa_supplicant_event(drv->ctx, EVENT_INTERFACE_STATUS,
+					     &event);
+		}
+		if (!ifa)
+			continue;
+
+		if ((ifa->ifa_flags & IFF_UP) == 0 &&
+		    (drv->flags & IFF_UP) != 0) {
+			wpa_printf(MSG_DEBUG, "RTM_IFINFO: Interface '%s' DOWN",
+				   drv->ifname);
+			wpa_supplicant_event(drv->ctx, EVENT_INTERFACE_DISABLED,
+					     NULL);
+		} else if ((ifa->ifa_flags & IFF_UP) != 0 &&
+			   (drv->flags & IFF_UP) == 0) {
+			wpa_printf(MSG_DEBUG, "RTM_IFINFO: Interface '%s' UP",
+				   drv->ifname);
+			wpa_supplicant_event(drv->ctx, EVENT_INTERFACE_ENABLED,
+					     NULL);
+		}
+		drv->flags = ifa->ifa_flags;
+	}
+
+	freeifaddrs(ifaddrs);
+}
+#endif /* SO_RERROR */
+
 static void
 bsd_wireless_event_receive(int sock, void *ctx, void *sock_ctx)
 {
@@ -635,6 +739,10 @@
 		if (errno != EINTR && errno != EAGAIN)
 			wpa_printf(MSG_ERROR, "%s read() failed: %s",
 				   __func__, strerror(errno));
+#ifdef SO_RERROR
+		if (errno == ENOBUFS)
+			bsd_route_overflow(sock, ctx, sock_ctx);
+#endif /* SO_RERROR */
 		return;
 	}
 
@@ -1568,14 +1676,15 @@
 	global->ctx = ctx;
 	dl_list_init(&global->ifaces);
 
-	global->sock = socket(PF_INET, SOCK_DGRAM, 0);
+	global->sock = socket(PF_INET, SOCK_DGRAM | SOCK_CLOEXEC, 0);
 	if (global->sock < 0) {
 		wpa_printf(MSG_ERROR, "socket[PF_INET,SOCK_DGRAM]: %s",
 			   strerror(errno));
 		goto fail1;
 	}
 
-	global->route = socket(PF_ROUTE, SOCK_RAW, 0);
+	global->route = socket(PF_ROUTE,
+			       SOCK_RAW | SOCK_CLOEXEC | SOCK_NONBLOCK, 0);
 	if (global->route < 0) {
 		wpa_printf(MSG_ERROR, "socket[PF_ROUTE,SOCK_RAW]: %s",
 			   strerror(errno));
diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index 170c367..ba2599e 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -469,8 +469,8 @@
 	}
  out:
 	nl_cb_put(cb);
-	if (!valid_handler && valid_data == (void *) -1)
-		nl80211_nlmsg_clear(msg);
+	/* Always clear the message as it can potentially contain keys */
+	nl80211_nlmsg_clear(msg);
 	nlmsg_free(msg);
 	return err;
 }
@@ -504,6 +504,9 @@
 							      void *),
 				    void *ack_data)
 {
+	if (!msg)
+		return -ENOMEM;
+
 	/* Control port over nl80211 needs the flags and attributes below.
 	 *
 	 * The Linux kernel has initial checks for them (in nl80211.c) like:
@@ -674,6 +677,7 @@
 	int wiphy_idx;
 	enum nl80211_iftype nlmode;
 	u8 *macaddr;
+	u8 use_4addr;
 };
 
 
@@ -696,6 +700,9 @@
 		os_memcpy(info->macaddr, nla_data(tb[NL80211_ATTR_MAC]),
 			  ETH_ALEN);
 
+	if (tb[NL80211_ATTR_4ADDR])
+		info->use_4addr = nla_get_u8(tb[NL80211_ATTR_4ADDR]);
+
 	return NL_SKIP;
 }
 
@@ -751,6 +758,21 @@
 }
 
 
+static int nl80211_get_4addr(struct i802_bss *bss)
+{
+	struct nl_msg *msg;
+	struct wiphy_idx_data data = {
+		.use_4addr = 0,
+	};
+
+	if (!(msg = nl80211_cmd_msg(bss, 0, NL80211_CMD_GET_INTERFACE)) ||
+	    send_and_recv_msgs(bss->drv, msg, netdev_info_handler, &data,
+			       NULL, NULL))
+		return -1;
+	return data.use_4addr;
+}
+
+
 static int nl80211_register_beacons(struct wpa_driver_nl80211_data *drv,
 				    struct nl80211_wiphy_data *w)
 {
@@ -2329,6 +2351,14 @@
 				       (u8 *) "\x03\x00", 2, false);
 	}
 
+#ifdef CONFIG_PASN
+	/* register for PASN Authentication frames */
+	if ((drv->capa.flags & WPA_DRIVER_FLAGS_SME) &&
+	    nl80211_register_frame(bss, bss->nl_mgmt, type,
+				   (u8 *) "\x07\x00", 2, false))
+		ret = -1;
+#endif /* CONFIG_PASN */
+
 #ifdef CONFIG_INTERWORKING
 	/* QoS Map Configure */
 	if (nl80211_register_action_frame(bss, (u8 *) "\x01\x04", 2) < 0)
@@ -2978,6 +3008,7 @@
 	os_free(drv->filter_ssids);
 
 	os_free(drv->auth_ie);
+	os_free(drv->auth_data);
 
 	if (drv->in_interface_list)
 		dl_list_del(&drv->list);
@@ -2989,6 +3020,9 @@
 		os_free(drv->iface_ext_capa[i].ext_capa_mask);
 	}
 	os_free(drv->first_bss);
+#ifdef CONFIG_DRIVER_NL80211_QCA
+	os_free(drv->pending_roam_data);
+#endif /* CONFIG_DRIVER_NL80211_QCA */
 	os_free(drv);
 }
 
@@ -3228,7 +3262,7 @@
 		nlmsg_free(msg);
 		return -1;
 	}
-	ret = send_and_recv_msgs(drv, msg, NULL, (void *) -1, NULL, NULL);
+	ret = send_and_recv_msgs(drv, msg, NULL, NULL, NULL, NULL);
 	if (ret) {
 		wpa_printf(MSG_DEBUG,
 			   "nl80211: Key management set key failed: ret=%d (%s)",
@@ -3298,7 +3332,7 @@
 		return -ENOBUFS;
 	}
 
-	ret = send_and_recv_msgs(drv, msg, NULL, (void *) -1, NULL, NULL);
+	ret = send_and_recv_msgs(drv, msg, NULL, NULL, NULL, NULL);
 	if (ret) {
 		wpa_printf(MSG_DEBUG, "nl80211: Set PMK failed: ret=%d (%s)",
 			   ret, strerror(-ret));
@@ -3470,8 +3504,7 @@
 			goto fail;
 	}
 
-	ret = send_and_recv_msgs(drv, msg, NULL, key ? (void *) -1 : NULL,
-				 NULL, NULL);
+	ret = send_and_recv_msgs(drv, msg, NULL, NULL, NULL, NULL);
 	if ((ret == -ENOENT || ret == -ENOLINK) && alg == WPA_ALG_NONE)
 		ret = 0;
 	if (ret)
@@ -3756,6 +3789,16 @@
 		}
 	}
 
+	os_free(drv->auth_data);
+	drv->auth_data = NULL;
+	drv->auth_data_len = 0;
+	if (params->auth_data) {
+		drv->auth_data = os_memdup(params->auth_data,
+					   params->auth_data_len);
+		if (drv->auth_data)
+			drv->auth_data_len = params->auth_data_len;
+	}
+
 	for (i = 0; i < 4; i++) {
 		if (params->wep_key[i] && params->wep_key_len[i] &&
 		    params->wep_key_len[i] <= 16) {
@@ -4009,6 +4052,8 @@
 
 	params.ie = drv->auth_ie;
 	params.ie_len = drv->auth_ie_len;
+	params.auth_data = drv->auth_data;
+	params.auth_data_len = drv->auth_data_len;
 
 	for (i = 0; i < 4; i++) {
 		if (drv->auth_wep_key_len[i]) {
@@ -4090,15 +4135,26 @@
 			encrypt = 0;
 	}
 
-	if (freq == 0 && drv->nlmode == NL80211_IFTYPE_STATION &&
-	    (drv->capa.flags & WPA_DRIVER_FLAGS_SAE) &&
-	    !(drv->capa.flags & WPA_DRIVER_FLAGS_SME) &&
+	if (is_sta_interface(drv->nlmode) &&
 	    WLAN_FC_GET_TYPE(fc) == WLAN_FC_TYPE_MGMT &&
 	    WLAN_FC_GET_STYPE(fc) == WLAN_FC_STYPE_AUTH) {
-		freq = nl80211_get_assoc_freq(drv);
-		wpa_printf(MSG_DEBUG,
-			   "nl80211: send_mlme - Use assoc_freq=%u for external auth",
-			   freq);
+		if (freq == 0 &&
+		    (drv->capa.flags & WPA_DRIVER_FLAGS_SAE) &&
+		    !(drv->capa.flags & WPA_DRIVER_FLAGS_SME)) {
+			freq = nl80211_get_assoc_freq(drv);
+			wpa_printf(MSG_DEBUG,
+				   "nl80211: send_mlme - Use assoc_freq=%u for external auth",
+				   freq);
+		}
+
+		/* Allow off channel for PASN authentication */
+		if (data_len >= IEEE80211_HDRLEN + 2 &&
+		    WPA_GET_LE16(data + IEEE80211_HDRLEN) == WLAN_AUTH_PASN &&
+		    !offchanok) {
+			wpa_printf(MSG_DEBUG,
+				   "nl80211: send_mlme: allow off channel for PASN");
+			offchanok = 1;
+		}
 	}
 
 	if (freq == 0 && drv->nlmode == NL80211_IFTYPE_ADHOC) {
@@ -4294,11 +4350,12 @@
 #endif /* CONFIG_MESH */
 
 
-static int nl80211_put_beacon_rate(struct nl_msg *msg, const u64 flags,
+static int nl80211_put_beacon_rate(struct nl_msg *msg, u64 flags, u64 flags2,
 				   struct wpa_driver_ap_params *params)
 {
 	struct nlattr *bands, *band;
 	struct nl80211_txrate_vht vht_rate;
+	struct nl80211_txrate_he he_rate;
 
 	if (!params->freq ||
 	    (params->beacon_rate == 0 &&
@@ -4315,7 +4372,10 @@
 		band = nla_nest_start(msg, NL80211_BAND_2GHZ);
 		break;
 	case HOSTAPD_MODE_IEEE80211A:
-		band = nla_nest_start(msg, NL80211_BAND_5GHZ);
+		if (is_6ghz_freq(params->freq->freq))
+			band = nla_nest_start(msg, NL80211_BAND_6GHZ);
+		else
+			band = nla_nest_start(msg, NL80211_BAND_5GHZ);
 		break;
 	case HOSTAPD_MODE_IEEE80211AD:
 		band = nla_nest_start(msg, NL80211_BAND_60GHZ);
@@ -4328,6 +4388,7 @@
 		return -1;
 
 	os_memset(&vht_rate, 0, sizeof(vht_rate));
+	os_memset(&he_rate, 0, sizeof(he_rate));
 
 	switch (params->rate_type) {
 	case BEACON_RATE_LEGACY:
@@ -4380,6 +4441,22 @@
 		wpa_printf(MSG_DEBUG, " * beacon_rate = VHT-MCS %u",
 			   params->beacon_rate);
 		break;
+	case BEACON_RATE_HE:
+		if (!(flags2 & WPA_DRIVER_FLAGS2_BEACON_RATE_HE)) {
+			wpa_printf(MSG_INFO,
+				   "nl80211: Driver does not support setting Beacon frame rate (HE)");
+			return -1;
+		}
+		he_rate.mcs[0] = BIT(params->beacon_rate);
+		if (nla_put(msg, NL80211_TXRATE_LEGACY, 0, NULL) ||
+		    nla_put(msg, NL80211_TXRATE_HT, 0, NULL) ||
+		    nla_put(msg, NL80211_TXRATE_VHT, sizeof(vht_rate),
+			    &vht_rate) ||
+		    nla_put(msg, NL80211_TXRATE_HE, sizeof(he_rate), &he_rate))
+			return -1;
+		wpa_printf(MSG_DEBUG, " * beacon_rate = HE-MCS %u",
+			   params->beacon_rate);
+		break;
 	}
 
 	nla_nest_end(msg, band);
@@ -4435,6 +4512,93 @@
 }
 
 
+#ifdef CONFIG_SAE
+static int nl80211_put_sae_pwe(struct nl_msg *msg, int pwe)
+{
+	u8 sae_pwe;
+
+	wpa_printf(MSG_DEBUG, "nl802111: sae_pwe=%d", pwe);
+	if (pwe == 0)
+		sae_pwe = NL80211_SAE_PWE_HUNT_AND_PECK;
+	else if (pwe == 1)
+		sae_pwe = NL80211_SAE_PWE_HASH_TO_ELEMENT;
+	else if (pwe == 2)
+		sae_pwe = NL80211_SAE_PWE_BOTH;
+	else if (pwe == 3)
+		return 0; /* special test mode */
+	else
+		return -1;
+	if (nla_put_u8(msg, NL80211_ATTR_SAE_PWE, sae_pwe))
+		return -1;
+
+	return 0;
+}
+#endif /* CONFIG_SAE */
+
+
+#ifdef CONFIG_FILS
+static int nl80211_fils_discovery(struct i802_bss *bss, struct nl_msg *msg,
+				  struct wpa_driver_ap_params *params)
+{
+	struct nlattr *attr;
+
+	if (!bss->drv->fils_discovery) {
+		wpa_printf(MSG_ERROR,
+			   "nl80211: Driver does not support FILS Discovery frame transmission for %s",
+			   bss->ifname);
+		return -1;
+	}
+
+	attr = nla_nest_start(msg, NL80211_ATTR_FILS_DISCOVERY);
+	if (!attr ||
+	    nla_put_u32(msg, NL80211_FILS_DISCOVERY_ATTR_INT_MIN,
+			params->fd_min_int) ||
+	    nla_put_u32(msg, NL80211_FILS_DISCOVERY_ATTR_INT_MAX,
+			params->fd_max_int) ||
+	    (params->fd_frame_tmpl &&
+	     nla_put(msg, NL80211_FILS_DISCOVERY_ATTR_TMPL,
+		     params->fd_frame_tmpl_len, params->fd_frame_tmpl)))
+		return -1;
+
+	nla_nest_end(msg, attr);
+	return 0;
+}
+#endif /* CONFIG_FILS */
+
+
+#ifdef CONFIG_IEEE80211AX
+static int nl80211_unsol_bcast_probe_resp(struct i802_bss *bss,
+					  struct nl_msg *msg,
+					  struct wpa_driver_ap_params *params)
+{
+	struct nlattr *attr;
+
+	if (!bss->drv->unsol_bcast_probe_resp) {
+		wpa_printf(MSG_ERROR,
+			   "nl80211: Driver does not support unsolicited broadcast Probe Response frame transmission for %s",
+			   bss->ifname);
+		return -1;
+	}
+
+	wpa_printf(MSG_DEBUG,
+		   "nl80211: Unsolicited broadcast Probe Response frame interval: %u",
+		   params->unsol_bcast_probe_resp_interval);
+	attr = nla_nest_start(msg, NL80211_ATTR_UNSOL_BCAST_PROBE_RESP);
+	if (!attr ||
+	    nla_put_u32(msg, NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT,
+			params->unsol_bcast_probe_resp_interval) ||
+	    (params->unsol_bcast_probe_resp_tmpl &&
+	     nla_put(msg, NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL,
+		     params->unsol_bcast_probe_resp_tmpl_len,
+		     params->unsol_bcast_probe_resp_tmpl)))
+		return -1;
+
+	nla_nest_end(msg, attr);
+	return 0;
+}
+#endif /* CONFIG_IEEE80211AX */
+
+
 static int wpa_driver_nl80211_set_ap(void *priv,
 				     struct wpa_driver_ap_params *params)
 {
@@ -4478,7 +4642,8 @@
 	    nla_put(msg, NL80211_ATTR_BEACON_TAIL, params->tail_len,
 		    params->tail) ||
 	    nl80211_put_beacon_int(msg, params->beacon_int) ||
-	    nl80211_put_beacon_rate(msg, drv->capa.flags, params) ||
+	    nl80211_put_beacon_rate(msg, drv->capa.flags, drv->capa.flags2,
+				    params) ||
 	    nl80211_put_dtim_period(msg, params->dtim_period) ||
 	    nla_put(msg, NL80211_ATTR_SSID, params->ssid_len, params->ssid))
 		goto fail;
@@ -4656,17 +4821,34 @@
 	}
 
 #ifdef CONFIG_IEEE80211AX
-	if (params->he_spr) {
+	if (params->he_spr_ctrl) {
 		struct nlattr *spr;
 
 		spr = nla_nest_start(msg, NL80211_ATTR_HE_OBSS_PD);
-		wpa_printf(MSG_DEBUG, "nl80211: he_spr=%d", params->he_spr);
+		wpa_printf(MSG_DEBUG, "nl80211: he_spr_ctrl=0x%x",
+			   params->he_spr_ctrl);
 
 		if (!spr ||
-		    nla_put_u8(msg, NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET,
-			       params->he_spr_srg_obss_pd_min_offset) ||
-		    nla_put_u8(msg, NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET,
-			       params->he_spr_srg_obss_pd_max_offset))
+		    nla_put_u8(msg, NL80211_HE_OBSS_PD_ATTR_SR_CTRL,
+			       params->he_spr_ctrl) ||
+		    ((params->he_spr_ctrl &
+		      SPATIAL_REUSE_NON_SRG_OFFSET_PRESENT) &&
+		     nla_put_u8(msg, NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET,
+				params->he_spr_non_srg_obss_pd_max_offset)))
+			goto fail;
+
+		if ((params->he_spr_ctrl &
+		     SPATIAL_REUSE_SRG_INFORMATION_PRESENT) &&
+		    (nla_put_u8(msg, NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET,
+				params->he_spr_srg_obss_pd_min_offset) ||
+		     nla_put_u8(msg, NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET,
+				params->he_spr_srg_obss_pd_max_offset) ||
+		     nla_put(msg, NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP,
+			     sizeof(params->he_spr_bss_color_bitmap),
+			     params->he_spr_bss_color_bitmap) ||
+		     nla_put(msg, NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP,
+			     sizeof(params->he_spr_partial_bssid_bitmap),
+			     params->he_spr_partial_bssid_bitmap)))
 			goto fail;
 
 		nla_nest_end(msg, spr);
@@ -4693,8 +4875,24 @@
 		if (nla_put_flag(msg, NL80211_ATTR_TWT_RESPONDER))
 			goto fail;
 	}
+
+	if (params->unsol_bcast_probe_resp_interval &&
+	    nl80211_unsol_bcast_probe_resp(bss, msg, params) < 0)
+		goto fail;
 #endif /* CONFIG_IEEE80211AX */
 
+#ifdef CONFIG_SAE
+	if (((params->key_mgmt_suites & WPA_KEY_MGMT_SAE) ||
+	     (params->key_mgmt_suites & WPA_KEY_MGMT_FT_SAE)) &&
+	    nl80211_put_sae_pwe(msg, params->sae_pwe) < 0)
+		goto fail;
+#endif /* CONFIG_SAE */
+
+#ifdef CONFIG_FILS
+	if (params->fd_max_int && nl80211_fils_discovery(bss, msg, params) < 0)
+		goto fail;
+#endif /* CONFIG_FILS */
+
 	ret = send_and_recv_msgs_owner(drv, msg, get_connect_handle(bss), 1,
 				       NULL, NULL, NULL, NULL);
 	if (ret) {
@@ -4995,6 +5193,16 @@
 				goto fail;
 		}
 
+		if (params->he_6ghz_capab) {
+			wpa_hexdump(MSG_DEBUG, "  * he_6ghz_capab",
+				    params->he_6ghz_capab,
+				    sizeof(*params->he_6ghz_capab));
+			if (nla_put(msg, NL80211_ATTR_HE_6GHZ_CAPABILITY,
+				    sizeof(*params->he_6ghz_capab),
+				    params->he_6ghz_capab))
+				goto fail;
+		}
+
 		if (params->ext_capab) {
 			wpa_hexdump(MSG_DEBUG, "  * ext_capab",
 				    params->ext_capab, params->ext_capab_len);
@@ -5326,6 +5534,10 @@
 	if (nla_put_flag(msg, NL80211_ATTR_IFACE_SOCKET_OWNER))
 		goto fail;
 
+	if ((addr && iftype == NL80211_IFTYPE_P2P_DEVICE) &&
+	    nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, addr))
+		goto fail;
+
 	ret = send_and_recv_msgs(drv, msg, handler, arg, NULL, NULL);
 	msg = NULL;
 	if (ret) {
@@ -6245,6 +6457,13 @@
 	    nla_put_u32(msg, NL80211_ATTR_USE_MFP, NL80211_MFP_OPTIONAL))
 		goto fail;
 
+#ifdef CONFIG_SAE
+	if ((params->key_mgmt_suite == WPA_KEY_MGMT_SAE ||
+	     params->key_mgmt_suite == WPA_KEY_MGMT_FT_SAE) &&
+	    nl80211_put_sae_pwe(msg, params->sae_pwe) < 0)
+		goto fail;
+#endif /* CONFIG_SAE */
+
 	algs = 0;
 	if (params->auth_alg & WPA_AUTH_ALG_OPEN)
 		algs++;
@@ -6274,12 +6493,15 @@
 		goto fail;
 
 	ret = send_and_recv_msgs_owner(drv, msg, nl_connect, 1, NULL,
-				       (void *) -1, NULL, NULL);
+				       NULL, NULL, NULL);
 	msg = NULL;
 	if (ret) {
 		wpa_printf(MSG_DEBUG, "nl80211: MLME connect failed: ret=%d "
 			   "(%s)", ret, strerror(-ret));
 	} else {
+#ifdef CONFIG_DRIVER_NL80211_QCA
+		drv->roam_indication_done = false;
+#endif /* CONFIG_DRIVER_NL80211_QCA */
 		wpa_printf(MSG_DEBUG,
 			   "nl80211: Connect request send successfully");
 	}
@@ -8045,6 +8267,28 @@
 		os_memset(bss->rand_addr, 0, ETH_ALEN);
 	}
 
+#ifdef CONFIG_MESH
+	if (is_mesh_interface(drv->nlmode)) {
+		struct hostapd_hw_modes *modes;
+		u16 num_modes, flags;
+		u8 dfs_domain;
+		int i;
+
+		modes = nl80211_get_hw_feature_data(bss, &num_modes,
+						    &flags, &dfs_domain);
+		if (dfs_domain != HOSTAPD_DFS_REGION_ETSI &&
+		    ieee80211_is_dfs(bss->freq, modes, num_modes))
+			offchanok = 0;
+		if (modes) {
+			for (i = 0; i < num_modes; i++) {
+				os_free(modes[i].channels);
+				os_free(modes[i].rates);
+			}
+			os_free(modes);
+		}
+	}
+#endif /* CONFIG_MESH */
+
 	if (is_ap_interface(drv->nlmode) &&
 	    (!(drv->capa.flags & WPA_DRIVER_FLAGS_OFFCHANNEL_TX) ||
 	     (int) freq == bss->freq || drv->device_ap_sme ||
@@ -8601,7 +8845,7 @@
 		return -ENOBUFS;
 	}
 
-	return send_and_recv_msgs(bss->drv, msg, NULL, (void *) -1, NULL, NULL);
+	return send_and_recv_msgs(bss->drv, msg, NULL, NULL, NULL, NULL);
 }
 
 
@@ -8871,7 +9115,7 @@
 
 	nla_nest_end(msg, replay_nested);
 
-	ret = send_and_recv_msgs(drv, msg, NULL, (void *) -1, NULL, NULL);
+	ret = send_and_recv_msgs(drv, msg, NULL, NULL, NULL, NULL);
 	if (ret == -EOPNOTSUPP) {
 		wpa_printf(MSG_DEBUG,
 			   "nl80211: Driver does not support rekey offload");
@@ -9837,14 +10081,35 @@
 }
 
 
+static bool is_cmd_with_nested_attrs(unsigned int vendor_id,
+				     unsigned int subcmd)
+{
+	if (vendor_id != OUI_QCA)
+		return true;
+
+	switch (subcmd) {
+	case QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY:
+	case QCA_NL80211_VENDOR_SUBCMD_STATS_EXT:
+	case QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI:
+	case QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY:
+	case QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS:
+	case QCA_NL80211_VENDOR_SUBCMD_NAN:
+		return false;
+	default:
+		return true;
+	}
+}
+
+
 static int nl80211_vendor_cmd(void *priv, unsigned int vendor_id,
 			      unsigned int subcmd, const u8 *data,
-			      size_t data_len, struct wpabuf *buf)
+			      size_t data_len, enum nested_attr nested_attr,
+			      struct wpabuf *buf)
 {
 	struct i802_bss *bss = priv;
 	struct wpa_driver_nl80211_data *drv = bss->drv;
 	struct nl_msg *msg;
-	int ret;
+	int ret, nla_flag;
 
 #ifdef CONFIG_TESTING_OPTIONS
 	if (vendor_id == 0xffffffff) {
@@ -9870,11 +10135,20 @@
 	}
 #endif /* CONFIG_TESTING_OPTIONS */
 
+	if (nested_attr == NESTED_ATTR_USED)
+		nla_flag = NLA_F_NESTED;
+	else if (nested_attr == NESTED_ATTR_UNSPECIFIED &&
+		 is_cmd_with_nested_attrs(vendor_id, subcmd))
+		nla_flag = NLA_F_NESTED;
+	else
+		nla_flag = 0;
+
 	if (!(msg = nl80211_cmd_msg(bss, 0, NL80211_CMD_VENDOR)) ||
 	    nla_put_u32(msg, NL80211_ATTR_VENDOR_ID, vendor_id) ||
 	    nla_put_u32(msg, NL80211_ATTR_VENDOR_SUBCMD, subcmd) ||
 	    (data &&
-	     nla_put(msg, NL80211_ATTR_VENDOR_DATA, data_len, data)))
+	     nla_put(msg, nla_flag | NL80211_ATTR_VENDOR_DATA,
+		     data_len, data)))
 		goto fail;
 
 	ret = send_and_recv_msgs(drv, msg, vendor_reply_handler, buf,
@@ -10324,6 +10598,9 @@
 
 	wpa_printf(MSG_DEBUG, "  * flags=%08X", params->flags);
 
+	if (params->handle_dfs && nla_put_flag(msg, NL80211_ATTR_HANDLE_DFS))
+		goto fail;
+
 	container = nla_nest_start(msg, NL80211_ATTR_MESH_SETUP);
 	if (!container)
 		goto fail;
@@ -10869,38 +11146,49 @@
 }
 
 
-static int nl80211_set_band(void *priv, enum set_band band)
+static int nl80211_set_band(void *priv, u32 band_mask)
 {
 	struct i802_bss *bss = priv;
 	struct wpa_driver_nl80211_data *drv = bss->drv;
 	struct nl_msg *msg;
 	struct nlattr *data;
 	int ret;
-	enum qca_set_band qca_band;
+	enum qca_set_band qca_band_value;
+	u32 qca_band_mask = QCA_SETBAND_AUTO;
 
-	if (!drv->setband_vendor_cmd_avail)
+	if (!drv->setband_vendor_cmd_avail ||
+	    (band_mask > (WPA_SETBAND_2G | WPA_SETBAND_5G | WPA_SETBAND_6G)))
 		return -1;
 
-	switch (band) {
-	case WPA_SETBAND_AUTO:
-		qca_band = QCA_SETBAND_AUTO;
-		break;
-	case WPA_SETBAND_5G:
-		qca_band = QCA_SETBAND_5G;
-		break;
-	case WPA_SETBAND_2G:
-		qca_band = QCA_SETBAND_2G;
-		break;
-	default:
-		return -1;
-	}
+	if (band_mask & WPA_SETBAND_5G)
+		qca_band_mask |= QCA_SETBAND_5G;
+	if (band_mask & WPA_SETBAND_2G)
+		qca_band_mask |= QCA_SETBAND_2G;
+	if (band_mask & WPA_SETBAND_6G)
+		qca_band_mask |= QCA_SETBAND_6G;
+
+	/*
+	 * QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE is a legacy interface hence make
+	 * it suite to its values (AUTO/5G/2G) for backwards compatibility.
+	 */
+	qca_band_value = ((qca_band_mask & QCA_SETBAND_5G) &&
+			  (qca_band_mask & QCA_SETBAND_2G)) ?
+				QCA_SETBAND_AUTO :
+				qca_band_mask & ~QCA_SETBAND_6G;
+
+	wpa_printf(MSG_DEBUG,
+		   "nl80211: QCA_BAND_MASK = 0x%x, QCA_BAND_VALUE = %d",
+		   qca_band_mask, qca_band_value);
 
 	if (!(msg = nl80211_drv_msg(drv, 0, NL80211_CMD_VENDOR)) ||
 	    nla_put_u32(msg, NL80211_ATTR_VENDOR_ID, OUI_QCA) ||
 	    nla_put_u32(msg, NL80211_ATTR_VENDOR_SUBCMD,
 			QCA_NL80211_VENDOR_SUBCMD_SETBAND) ||
 	    !(data = nla_nest_start(msg, NL80211_ATTR_VENDOR_DATA)) ||
-	    nla_put_u32(msg, QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE, qca_band)) {
+	    nla_put_u32(msg, QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE,
+			qca_band_value) ||
+	    nla_put_u32(msg, QCA_WLAN_VENDOR_ATTR_SETBAND_MASK,
+			qca_band_mask)) {
 		nlmsg_free(msg);
 		return -ENOBUFS;
 	}
@@ -11531,6 +11819,10 @@
 	char path[128];
 	int ret;
 
+	/* P2P-Device has no netdev that can (or should) be configured here */
+	if (nl80211_get_ifmode(bss) == NL80211_IFTYPE_P2P_DEVICE)
+		return 0;
+
 	wpa_printf(MSG_DEBUG, "nl80211: Data frame filter flags=0x%x",
 		   filter_flags);
 
@@ -11756,6 +12048,11 @@
 
 	ret = send_and_recv_msgs(drv, msg, NULL, NULL, NULL, NULL);
 	msg = NULL;
+	if (ret && val && nl80211_get_4addr(bss) == 1) {
+		wpa_printf(MSG_DEBUG,
+			   "nl80211: 4addr mode was already enabled");
+		ret = 0;
+	}
 	if (!ret) {
 		if (bridge_ifname[0] && val &&
 		    i802_check_bridge(drv, bss, bridge_ifname, bss->ifname) < 0)
diff --git a/src/drivers/driver_nl80211.h b/src/drivers/driver_nl80211.h
index 4688924..e7fe180 100644
--- a/src/drivers/driver_nl80211.h
+++ b/src/drivers/driver_nl80211.h
@@ -174,6 +174,9 @@
 	unsigned int control_port_ap:1;
 	unsigned int multicast_registrations:1;
 	unsigned int no_rrm:1;
+	unsigned int get_sta_info_vendor_cmd_avail:1;
+	unsigned int fils_discovery:1;
+	unsigned int unsol_bcast_probe_resp:1;
 
 	u64 vendor_scan_cookie;
 	u64 remain_on_chan_cookie;
@@ -208,6 +211,8 @@
 	int auth_alg;
 	u8 *auth_ie;
 	size_t auth_ie_len;
+	u8 *auth_data;
+	size_t auth_data_len;
 	u8 auth_wep_key[4][16];
 	size_t auth_wep_key_len[4];
 	int auth_wep_tx_keyidx;
@@ -223,6 +228,12 @@
 #ifdef CONFIG_DRIVER_NL80211_BRCM
 	unsigned int vendor_set_pmk:1; /* for legacy set_pmk method before NL80211_CMD_SET_PMK */
 #endif /* CONFIG_DRIVER_NL80211_BRCM */
+#ifdef CONFIG_DRIVER_NL80211_QCA
+	bool roam_indication_done;
+	u8 *pending_roam_data;
+	size_t pending_roam_data_len;
+	struct os_reltime pending_roam_ind_time;
+#endif /* CONFIG_DRIVER_NL80211_QCA */
 };
 
 struct nl_msg;
@@ -291,6 +302,10 @@
 int android_pno_stop(struct i802_bss *bss);
 extern int wpa_driver_nl80211_driver_cmd(void *priv, char *cmd, char *buf,
 					 size_t buf_len);
+extern int wpa_driver_nl80211_driver_event(struct wpa_driver_nl80211_data *drv,
+					   u32 vendor_id, u32 subcmd,
+					   u8 *data, size_t len);
+
 
 #ifdef ANDROID_P2P
 int wpa_driver_set_p2p_noa(void *priv, u8 count, int start, int duration);
diff --git a/src/drivers/driver_nl80211_capa.c b/src/drivers/driver_nl80211_capa.c
index 0e038db..8208762 100644
--- a/src/drivers/driver_nl80211_capa.c
+++ b/src/drivers/driver_nl80211_capa.c
@@ -561,6 +561,10 @@
 		capa->flags |= WPA_DRIVER_FLAGS_BEACON_RATE_VHT;
 
 	if (ext_feature_isset(ext_features, len,
+			      NL80211_EXT_FEATURE_BEACON_RATE_HE))
+		capa->flags2 |= WPA_DRIVER_FLAGS2_BEACON_RATE_HE;
+
+	if (ext_feature_isset(ext_features, len,
 			      NL80211_EXT_FEATURE_SET_SCAN_DWELL))
 		capa->rrm_flags |= WPA_DRIVER_FLAGS_SUPPORT_SET_SCAN_DWELL;
 
@@ -646,6 +650,22 @@
 	if (ext_feature_isset(ext_features, len,
 			      NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS))
 		info->drv->multicast_registrations = 1;
+
+	if (ext_feature_isset(ext_features, len,
+			      NL80211_EXT_FEATURE_FILS_DISCOVERY))
+		info->drv->fils_discovery = 1;
+
+	if (ext_feature_isset(ext_features, len,
+			      NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP))
+		info->drv->unsol_bcast_probe_resp = 1;
+
+	if (ext_feature_isset(ext_features, len,
+			      NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT))
+		capa->flags2 |= WPA_DRIVER_FLAGS2_BEACON_PROTECTION_CLIENT;
+
+	if (ext_feature_isset(ext_features, len,
+			      NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION))
+		capa->flags2 |= WPA_DRIVER_FLAGS2_OCV;
 }
 
 
@@ -996,6 +1016,9 @@
 				case QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE:
 					drv->add_sta_node_vendor_cmd_avail = 1;
 					break;
+				case QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO:
+					drv->get_sta_info_vendor_cmd_avail = 1;
+					break;
 #endif /* CONFIG_DRIVER_NL80211_QCA */
 				}
 			}
@@ -1386,6 +1409,7 @@
 
 	if (!info.device_ap_sme) {
 		drv->capa.flags |= WPA_DRIVER_FLAGS_DEAUTH_TX_STATUS;
+		drv->capa.flags2 |= WPA_DRIVER_FLAGS2_AP_SME;
 
 		/*
 		 * No AP SME is currently assumed to also indicate no AP MLME
@@ -1982,6 +2006,24 @@
 			modes[m].mode = HOSTAPD_MODE_IEEE80211A;
 	}
 
+	/* Remove unsupported bands */
+	m = 0;
+	while (m < *num_modes) {
+		if (modes[m].mode == NUM_HOSTAPD_MODES) {
+			wpa_printf(MSG_DEBUG,
+				   "nl80211: Remove unsupported mode");
+			os_free(modes[m].channels);
+			os_free(modes[m].rates);
+			if (m + 1 < *num_modes)
+				os_memmove(&modes[m], &modes[m + 1],
+					   sizeof(struct hostapd_hw_modes) *
+					   (*num_modes - (m + 1)));
+			(*num_modes)--;
+			continue;
+		}
+		m++;
+	}
+
 	/* If only 802.11g mode is included, use it to construct matching
 	 * 802.11b mode data. */
 
diff --git a/src/drivers/driver_nl80211_event.c b/src/drivers/driver_nl80211_event.c
index 6e73b90..81f688a 100644
--- a/src/drivers/driver_nl80211_event.c
+++ b/src/drivers/driver_nl80211_event.c
@@ -298,6 +298,94 @@
 }
 
 
+#ifdef CONFIG_DRIVER_NL80211_QCA
+
+static int qca_drv_connect_fail_reason_code_handler(struct nl_msg *msg,
+						    void *arg)
+{
+	struct nlattr *tb[NL80211_ATTR_MAX + 1];
+	struct nlattr *tb_sta_info[QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX + 1];
+	struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg));
+	u32 *reason_code = arg;
+
+	*reason_code = 0;
+	nla_parse(tb, NL80211_ATTR_MAX, genlmsg_attrdata(gnlh, 0),
+		  genlmsg_attrlen(gnlh, 0), NULL);
+
+	if (!tb[NL80211_ATTR_VENDOR_DATA]) {
+		wpa_printf(MSG_ERROR, "%s: Vendor data not found", __func__);
+		return NL_SKIP;
+	}
+
+	nla_parse(tb_sta_info, QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX,
+		  nla_data(tb[NL80211_ATTR_VENDOR_DATA]),
+		  nla_len(tb[NL80211_ATTR_VENDOR_DATA]), NULL);
+
+	if (!tb_sta_info[QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE]) {
+		wpa_printf(MSG_INFO, "%s: Vendor attr not found", __func__);
+		return NL_SKIP;
+	}
+
+	*reason_code = nla_get_u32(tb_sta_info[QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE]);
+
+	return NL_SKIP;
+}
+
+
+static enum qca_sta_connect_fail_reason_codes
+drv_get_connect_fail_reason_code(struct wpa_driver_nl80211_data *drv)
+{
+	enum qca_sta_connect_fail_reason_codes reason_code;
+	struct nl_msg *msg;
+	int ret;
+
+	msg = nl80211_drv_msg(drv, 0, NL80211_CMD_VENDOR);
+	if (!msg || nla_put_u32(msg, NL80211_ATTR_VENDOR_ID, OUI_QCA) ||
+	    nla_put_u32(msg, NL80211_ATTR_VENDOR_SUBCMD,
+			QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO)) {
+		nlmsg_free(msg);
+		return 0;
+	}
+
+	ret = send_and_recv_msgs(drv, msg,
+				 qca_drv_connect_fail_reason_code_handler,
+				 &reason_code, NULL, NULL);
+	if (ret)
+		wpa_printf(MSG_DEBUG,
+			   "nl80211: Get connect fail reason_code failed: ret=%d (%s)",
+			   ret, strerror(-ret));
+
+	return reason_code;
+}
+
+
+static enum sta_connect_fail_reason_codes
+convert_connect_fail_reason_codes(enum qca_sta_connect_fail_reason_codes
+				  reason_code)
+{
+	switch (reason_code) {
+	case QCA_STA_CONNECT_FAIL_REASON_NO_BSS_FOUND:
+		return STA_CONNECT_FAIL_REASON_NO_BSS_FOUND;
+	case QCA_STA_CONNECT_FAIL_REASON_AUTH_TX_FAIL:
+		return STA_CONNECT_FAIL_REASON_AUTH_TX_FAIL;
+	case QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_ACK_RECEIVED:
+		return STA_CONNECT_FAIL_REASON_AUTH_NO_ACK_RECEIVED;
+	case QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_RESP_RECEIVED:
+		return STA_CONNECT_FAIL_REASON_AUTH_NO_RESP_RECEIVED;
+	case QCA_STA_CONNECT_FAIL_REASON_ASSOC_REQ_TX_FAIL:
+		return STA_CONNECT_FAIL_REASON_ASSOC_REQ_TX_FAIL;
+	case QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_ACK_RECEIVED:
+		return STA_CONNECT_FAIL_REASON_ASSOC_NO_ACK_RECEIVED;
+	case QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_RESP_RECEIVED:
+		return STA_CONNECT_FAIL_REASON_ASSOC_NO_RESP_RECEIVED;
+	default:
+		return STA_CONNECT_FAIL_REASON_UNSPECIFIED;
+	}
+}
+
+#endif /* CONFIG_DRIVER_NL80211_QCA */
+
+
 static void mlme_event_connect(struct wpa_driver_nl80211_data *drv,
 			       enum nl80211_commands cmd, struct nlattr *status,
 			       struct nlattr *addr, struct nlattr *req_ie,
@@ -387,6 +475,17 @@
 		if (fils_erp_next_seq_num)
 			event.assoc_reject.fils_erp_next_seq_num =
 				nla_get_u16(fils_erp_next_seq_num);
+
+#ifdef CONFIG_DRIVER_NL80211_QCA
+		if (drv->get_sta_info_vendor_cmd_avail) {
+			enum qca_sta_connect_fail_reason_codes reason_code;
+
+			reason_code = drv_get_connect_fail_reason_code(drv);
+			event.assoc_reject.reason_code =
+				convert_connect_fail_reason_codes(reason_code);
+		}
+#endif /* CONFIG_DRIVER_NL80211_QCA */
+
 		wpa_supplicant_event(drv->ctx, EVENT_ASSOC_REJECT, &event);
 		return;
 	}
@@ -1286,7 +1385,6 @@
 	struct nlattr *cqm[NL80211_ATTR_CQM_MAX + 1];
 	enum nl80211_cqm_rssi_threshold_event event;
 	union wpa_event_data ed;
-	struct wpa_signal_info sig;
 	int res;
 
 	if (tb[NL80211_ATTR_CQM] == NULL ||
@@ -1353,19 +1451,27 @@
 		return;
 	}
 
-	res = nl80211_get_link_signal(drv, &sig);
+	/*
+	 * nl80211_get_link_signal() and nl80211_get_link_noise() set default
+	 * values in case querying the driver fails.
+	 */
+	res = nl80211_get_link_signal(drv, &ed.signal_change);
 	if (res == 0) {
-		ed.signal_change.current_signal = sig.current_signal;
-		ed.signal_change.current_txrate = sig.current_txrate;
 		wpa_printf(MSG_DEBUG, "nl80211: Signal: %d dBm  txrate: %d",
-			   sig.current_signal, sig.current_txrate);
+			   ed.signal_change.current_signal,
+			   ed.signal_change.current_txrate);
+	} else {
+		wpa_printf(MSG_DEBUG,
+			   "nl80211: Querying the driver for signal info failed");
 	}
 
-	res = nl80211_get_link_noise(drv, &sig);
+	res = nl80211_get_link_noise(drv, &ed.signal_change);
 	if (res == 0) {
-		ed.signal_change.current_noise = sig.current_noise;
 		wpa_printf(MSG_DEBUG, "nl80211: Noise: %d dBm",
-			   sig.current_noise);
+			   ed.signal_change.current_noise);
+	} else {
+		wpa_printf(MSG_DEBUG,
+			   "nl80211: Querying the driver for noise info failed");
 	}
 
 	wpa_supplicant_event(drv->ctx, EVENT_SIGNAL_CHANGE, &ed);
@@ -1929,7 +2035,7 @@
 		return 2407 + 5 * chan;
 	if (chan == 14)
 		return 2484;
-	if (chan >= 36 && chan <= 169)
+	if (chan >= 36 && chan <= 177)
 		return 5000 + 5 * chan;
 
 	return 0;
@@ -2057,6 +2163,27 @@
 }
 
 
+static void
+qca_nl80211_key_mgmt_auth_handler(struct wpa_driver_nl80211_data *drv,
+				  const u8 *data, size_t len)
+{
+	if (!drv->roam_indication_done) {
+		wpa_printf(MSG_DEBUG,
+			   "nl80211: Pending roam indication, delay processing roam+auth vendor event");
+		os_get_reltime(&drv->pending_roam_ind_time);
+
+		os_free(drv->pending_roam_data);
+		drv->pending_roam_data = os_memdup(data, len);
+		if (!drv->pending_roam_data)
+			return;
+		drv->pending_roam_data_len = len;
+		return;
+	}
+	drv->roam_indication_done = false;
+	qca_nl80211_key_mgmt_auth(drv, data, len);
+}
+
+
 static void qca_nl80211_dfs_offload_radar_event(
 	struct wpa_driver_nl80211_data *drv, u32 subcmd, u8 *msg, int length)
 {
@@ -2314,7 +2441,7 @@
 		qca_nl80211_avoid_freq(drv, data, len);
 		break;
 	case QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH:
-		qca_nl80211_key_mgmt_auth(drv, data, len);
+		qca_nl80211_key_mgmt_auth_handler(drv, data, len);
 		break;
 	case QCA_NL80211_VENDOR_SUBCMD_DO_ACS:
 		qca_nl80211_acs_select_ch(drv, data, len);
@@ -2379,6 +2506,12 @@
 		return;
 	}
 
+#ifdef ANDROID
+#ifdef ANDROID_LIB_EVENT
+       wpa_driver_nl80211_driver_event(drv, vendor_id, subcmd, data, len);
+#endif /* ANDROID_LIB_EVENT */
+#endif /* ANDROID */
+
 	switch (vendor_id) {
 	case OUI_QCA:
 		nl80211_vendor_event_qca(drv, subcmd, data, len);
@@ -2711,17 +2844,36 @@
 	wpa_printf(MSG_DEBUG, "nl80211: Drv Event %d (%s) received for %s",
 		   cmd, nl80211_command_to_string(cmd), bss->ifname);
 
+#ifdef CONFIG_DRIVER_NL80211_QCA
 	if (cmd == NL80211_CMD_ROAM &&
 	    (drv->capa.flags & WPA_DRIVER_FLAGS_KEY_MGMT_OFFLOAD)) {
+		if (drv->pending_roam_data) {
+			struct os_reltime now, age;
+
+			os_get_reltime(&now);
+			os_reltime_sub(&now, &drv->pending_roam_ind_time, &age);
+			if (age.sec == 0 && age.usec < 100000) {
+				wpa_printf(MSG_DEBUG,
+					   "nl80211: Process pending roam+auth vendor event");
+				qca_nl80211_key_mgmt_auth(
+					drv, drv->pending_roam_data,
+					drv->pending_roam_data_len);
+			}
+			os_free(drv->pending_roam_data);
+			drv->pending_roam_data = NULL;
+			return;
+		}
 		/*
 		 * Device will use roam+auth vendor event to indicate
 		 * roaming, so ignore the regular roam event.
 		 */
+		drv->roam_indication_done = true;
 		wpa_printf(MSG_DEBUG,
 			   "nl80211: Ignore roam event (cmd=%d), device will use vendor event roam+auth",
 			   cmd);
 		return;
 	}
+#endif /* CONFIG_DRIVER_NL80211_QCA */
 
 	if (drv->ap_scan_as_station != NL80211_IFTYPE_UNSPECIFIED &&
 	    (cmd == NL80211_CMD_NEW_SCAN_RESULTS ||
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index dad8c8f..ac78da9 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -183,18 +183,27 @@
  *
  * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers
  * can indicate they support offloading EAPOL handshakes for WPA/WPA2
- * preshared key authentication. In %NL80211_CMD_CONNECT the preshared
- * key should be specified using %NL80211_ATTR_PMK. Drivers supporting
- * this offload may reject the %NL80211_CMD_CONNECT when no preshared
- * key material is provided, for example when that driver does not
- * support setting the temporal keys through %CMD_NEW_KEY.
+ * preshared key authentication in station mode. In %NL80211_CMD_CONNECT
+ * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers
+ * supporting this offload may reject the %NL80211_CMD_CONNECT when no
+ * preshared key material is provided, for example when that driver does
+ * not support setting the temporal keys through %NL80211_CMD_NEW_KEY.
  *
  * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be
  * set by drivers indicating offload support of the PTK/GTK EAPOL
- * handshakes during 802.1X authentication. In order to use the offload
- * the %NL80211_CMD_CONNECT should have %NL80211_ATTR_WANT_1X_4WAY_HS
- * attribute flag. Drivers supporting this offload may reject the
- * %NL80211_CMD_CONNECT when the attribute flag is not present.
+ * handshakes during 802.1X authentication in station mode. In order to
+ * use the offload the %NL80211_CMD_CONNECT should have
+ * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this
+ * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is
+ * not present.
+ *
+ * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag drivers
+ * can indicate they support offloading EAPOL handshakes for WPA/WPA2
+ * preshared key authentication in AP mode. In %NL80211_CMD_START_AP
+ * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers
+ * supporting this offload may reject the %NL80211_CMD_START_AP when no
+ * preshared key material is provided, for example when that driver does
+ * not support setting the temporal keys through %NL80211_CMD_NEW_KEY.
  *
  * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK
  * using %NL80211_CMD_SET_PMK. For offloaded FT support also
@@ -243,9 +252,13 @@
  * DOC: SAE authentication offload
  *
  * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they
- * support offloading SAE authentication for WPA3-Personal networks. In
- * %NL80211_CMD_CONNECT the password for SAE should be specified using
- * %NL80211_ATTR_SAE_PASSWORD.
+ * support offloading SAE authentication for WPA3-Personal networks in station
+ * mode. Similarly @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag can be set by
+ * drivers indicating the offload support in AP mode.
+ *
+ * The password for SAE should be specified using %NL80211_ATTR_SAE_PASSWORD in
+ * %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP for station and AP mode
+ * respectively.
  */
 
 /**
@@ -363,7 +376,7 @@
  * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
  *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
- *	the interface identified by %NL80211_ATTR_IFINDEX.
+ *	interface identified by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
  *	or, if no MAC address given, all stations, on the interface identified
  *	by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and
@@ -383,7 +396,7 @@
  * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
  *	%NL80211_ATTR_MAC.
  * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
- *	the interface identified by %NL80211_ATTR_IFINDEX.
+ *	interface identified by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
  *	or, if no MAC address given, all mesh paths, on the interface identified
  *	by %NL80211_ATTR_IFINDEX.
@@ -638,13 +651,9 @@
  *	authentication/association or not receiving a response from the AP.
  *	Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
  *	well to remain backwards compatible.
- *	When establishing a security association, drivers that support 4 way
- *	handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when
- *	the 4 way handshake is completed successfully.
  * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself.
- *	When a security association was established with the new AP (e.g. if
- *	the FT protocol was used for roaming or the driver completed the 4 way
- *	handshake), this event should be followed by an
+ *	When a security association was established on an 802.1X network using
+ *	fast transition, this event should be followed by an
  *	%NL80211_CMD_PORT_AUTHORIZED event.
  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
  *	userspace that a connection was dropped by the AP or due to other
@@ -748,7 +757,8 @@
  *	of any other interfaces, and other interfaces will again take
  *	precedence when they are used.
  *
- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface
+ *	(no longer supported).
  *
  * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
  *	multicast to unicast conversion. When enabled, all multicast packets
@@ -794,7 +804,7 @@
  *	various triggers. These triggers can be configured through this
  *	command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
  *	more background information, see
- *	http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ *	https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN.
  *	The @NL80211_CMD_SET_WOWLAN command can also be used as a notification
  *	from the driver reporting the wakeup reason. In this case, the
  *	@NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
@@ -934,7 +944,7 @@
  * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules.
  *
  * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the
- *	the new channel information (Channel Switch Announcement - CSA)
+ *	new channel information (Channel Switch Announcement - CSA)
  *	in the beacon for some time (as defined in the
  *	%NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the
  *	new channel. Userspace provides the new channel information (using
@@ -1058,13 +1068,11 @@
  * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
  *	configured PMK for the authenticator address identified by
  *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
- *	handshake was completed successfully by the driver. The BSSID is
- *	specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake
- *	offload should send this event after indicating 802.11 association with
- *	%NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed
- *	%NL80211_CMD_DISCONNECT should be indicated instead.
- *
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was
+ *	completed successfully. Drivers that support 4 way handshake offload
+ *	should send this event after indicating 802.1X FT assocation with
+ *	%NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT
+ *	should be indicated instead.
  * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
  *	and RX notification.  This command is used both as a request to transmit
  *	a control port frame and as a notification that a control port frame
@@ -1113,7 +1121,7 @@
  *	randomization may be enabled and configured by specifying the
  *	%NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes.
  *	If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute.
- *	A u64 cookie for further %NL80211_ATTR_COOKIE use is is returned in
+ *	A u64 cookie for further %NL80211_ATTR_COOKIE use is returned in
  *	the netlink extended ack message.
  *
  *	To cancel a measurement, close the socket that requested it.
@@ -1170,6 +1178,10 @@
  *	includes the contents of the frame. %NL80211_ATTR_ACK flag is included
  *	if the recipient acknowledged the frame.
  *
+ * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is
+ *	passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
+ *	specify the wiphy index to be applied to.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1400,6 +1412,8 @@
 
 	NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
 
+	NL80211_CMD_SET_SAR_SPECS,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1511,7 +1525,7 @@
  *	rates as defined by IEEE 802.11 7.3.2.2 but without the length
  *	restriction (at most %NL80211_MAX_SUPP_RATES).
  * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
- *	to, or the AP interface the station was originally added to to.
+ *	to, or the AP interface the station was originally added to.
  * @NL80211_ATTR_STA_INFO: information about a station, part of station info
  *	given for %NL80211_CMD_GET_STATION, nested attribute containing
  *	info as possible, see &enum nl80211_sta_info.
@@ -1743,8 +1757,9 @@
  *	specify just a single bitrate, which is to be used for the beacon.
  *	The driver must also specify support for this with the extended
  *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
- *	NL80211_EXT_FEATURE_BEACON_RATE_HT and
- *	NL80211_EXT_FEATURE_BEACON_RATE_VHT.
+ *	NL80211_EXT_FEATURE_BEACON_RATE_HT,
+ *	NL80211_EXT_FEATURE_BEACON_RATE_VHT and
+ *	NL80211_EXT_FEATURE_BEACON_RATE_HE.
  *
  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
  *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
@@ -1948,8 +1963,15 @@
  * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
  *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
  *	to be filled by the FW.
- * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
- *      this feature.  Currently, only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
+ *      this feature during association. This is a flag attribute.
+ *	Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable
+ *      this feature during association. This is a flag attribute.
+ *	Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
+ *      this feature during association. This is a flag attribute.
+ *	Currently only supported in mac80211 drivers.
  * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
  *      ATTR_HT_CAPABILITY to which attention should be paid.
  *      Currently, only mac80211 NICs support this feature.
@@ -2070,13 +2092,14 @@
  *	until the channel switch event.
  * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
  *	must be blocked on the current channel (before the channel switch
- *	operation).
+ *	operation). Also included in the channel switch started event if quiet
+ *	was requested by the AP.
  * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
  *	for the time while performing a channel switch.
- * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel
- *	switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
- * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel
- *	switch counters in the probe response (%NL80211_ATTR_PROBE_RESP).
+ * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
+ *	switch or color change counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
+ * @NL80211_ATTR_CNTDWN_OFFS_PRESP: An array of offsets (u16) to the channel
+ *	switch or color change counters in the probe response (%NL80211_ATTR_PROBE_RESP).
  *
  * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
  *	As specified in the &enum nl80211_rxmgmt_flags.
@@ -2084,7 +2107,7 @@
  * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels.
  *
  * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported
- *      supported operating classes.
+ *      operating classes.
  *
  * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space
  *	controls DFS operation in IBSS mode. If the flag is included in
@@ -2362,10 +2385,11 @@
  *
  * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
  *	%NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID.
- *	For %NL80211_CMD_CONNECT it is used to provide PSK for offloading 4-way
- *	handshake for WPA/WPA2-PSK networks. For 802.1X authentication it is
- *	used with %NL80211_CMD_SET_PMK. For offloaded FT support this attribute
- *	specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME is included as well.
+ *	For %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP it is used to provide
+ *	PSK for offloading 4-way handshake for WPA/WPA2-PSK networks. For 802.1X
+ *	authentication it is used with %NL80211_CMD_SET_PMK. For offloaded FT
+ *	support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME
+ *	is included as well.
  *
  * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
  *	indicate that it supports multiple active scheduled scan requests.
@@ -2395,7 +2419,7 @@
  *      nl80211_txq_stats)
  * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy.
  *      The smaller of this and the memory limit is enforced.
- * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory memory limit (in bytes) for the
+ * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory limit (in bytes) for the
  *      TXQ queues for this phy. The smaller of this and the packet limit is
  *      enforced.
  * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes
@@ -2505,6 +2529,34 @@
  * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
  *	association request when used with NL80211_CMD_NEW_STATION).
  *
+ * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS
+ *	discovery. It is a nested attribute, see
+ *	&enum nl80211_fils_discovery_attributes.
+ *
+ * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure
+ *	unsolicited broadcast probe response. It is a nested attribute, see
+ *	&enum nl80211_unsol_bcast_probe_resp_attributes.
+ *
+ * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from
+ *	association request when used with NL80211_CMD_NEW_STATION)
+ * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element
+ *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
+ *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE
+ *	derivation in WPA3-Personal networks which are using SAE authentication.
+ *	This is a u8 attribute that encapsulates one of the values from
+ *	&enum nl80211_sae_pwe_mechanism.
+ *
+ * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
+ *	used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields
+ *	of %nl80211_sar_attrs which specifies the sar type and related
+ *	sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.
+ *
+ * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
+ *	disassoc events to indicate that an immediate reconnect to the AP
+ *	is desired.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2811,8 +2863,8 @@
 	NL80211_ATTR_CH_SWITCH_COUNT,
 	NL80211_ATTR_CH_SWITCH_BLOCK_TX,
 	NL80211_ATTR_CSA_IES,
-	NL80211_ATTR_CSA_C_OFF_BEACON,
-	NL80211_ATTR_CSA_C_OFF_PRESP,
+	NL80211_ATTR_CNTDWN_OFFS_BEACON,
+	NL80211_ATTR_CNTDWN_OFFS_PRESP,
 
 	NL80211_ATTR_RXMGMT_FLAGS,
 
@@ -2987,6 +3039,21 @@
 
 	NL80211_ATTR_HE_6GHZ_CAPABILITY,
 
+	NL80211_ATTR_FILS_DISCOVERY,
+
+	NL80211_ATTR_UNSOL_BCAST_PROBE_RESP,
+
+	NL80211_ATTR_S1G_CAPABILITY,
+	NL80211_ATTR_S1G_CAPABILITY_MASK,
+
+	NL80211_ATTR_SAE_PWE,
+
+	NL80211_ATTR_RECONNECT_REQUESTED,
+
+	NL80211_ATTR_SAR_SPEC,
+
+	NL80211_ATTR_DISABLE_HE,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2999,6 +3066,8 @@
 #define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
 #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
 #define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA
+#define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON
+#define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP
 
 /*
  * Allow user space programs to use #ifdef on new attributes by defining them
@@ -3177,6 +3246,18 @@
 };
 
 /**
+ * enum nl80211_he_ltf - HE long training field
+ * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec
+ * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec
+ * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec
+ */
+enum nl80211_he_ltf {
+	NL80211_RATE_INFO_HE_1XLTF,
+	NL80211_RATE_INFO_HE_2XLTF,
+	NL80211_RATE_INFO_HE_4XLTF,
+};
+
+/**
  * enum nl80211_he_ru_alloc - HE RU allocation values
  * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation
  * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation
@@ -3370,6 +3451,8 @@
  * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station
  * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds)
  *	of STA's association
+ * @NL80211_STA_INFO_CONNECTED_TO_AS: set to true if STA has a path to a
+ *	authentication server (u8, 0 or 1)
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -3417,6 +3500,7 @@
 	NL80211_STA_INFO_AIRTIME_WEIGHT,
 	NL80211_STA_INFO_AIRTIME_LINK_METRIC,
 	NL80211_STA_INFO_ASSOC_AT_BOOTTIME,
+	NL80211_STA_INFO_CONNECTED_TO_AS,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -3712,6 +3796,16 @@
  * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
  *	in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz
+ * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed
+ *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -3743,6 +3837,11 @@
 	NL80211_FREQUENCY_ATTR_WMM,
 	NL80211_FREQUENCY_ATTR_NO_HE,
 	NL80211_FREQUENCY_ATTR_OFFSET,
+	NL80211_FREQUENCY_ATTR_1MHZ,
+	NL80211_FREQUENCY_ATTR_2MHZ,
+	NL80211_FREQUENCY_ATTR_4MHZ,
+	NL80211_FREQUENCY_ATTR_8MHZ,
+	NL80211_FREQUENCY_ATTR_16MHZ,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4036,6 +4135,7 @@
  *	receiving frames destined to the local BSS
  * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
  *	currently defined
+ * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz
  * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
  */
 enum nl80211_survey_info {
@@ -4051,6 +4151,7 @@
 	NL80211_SURVEY_INFO_TIME_SCAN,
 	NL80211_SURVEY_INFO_PAD,
 	NL80211_SURVEY_INFO_TIME_BSS_RX,
+	NL80211_SURVEY_INFO_FREQUENCY_OFFSET,
 
 	/* keep last */
 	__NL80211_SURVEY_INFO_AFTER_LAST,
@@ -4236,6 +4337,16 @@
  *	field.  If left unset then the mesh formation field will only
  *	advertise such if there is an active root mesh path.
  *
+ * @NL80211_MESHCONF_NOLEARN: Try to avoid multi-hop path discovery (e.g.
+ *      PREQ/PREP for HWMP) if the destination is a direct neighbor. Note that
+ *      this might not be the optimal decision as a multi-hop route might be
+ *      better. So if using this setting you will likely also want to disable
+ *      dot11MeshForwarding and use another mesh routing protocol on top.
+ *
+ * @NL80211_MESHCONF_CONNECTED_TO_AS: If set to true then this mesh STA
+ *	will advertise that it is connected to a authentication server
+ *	in the mesh formation field.
+ *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
@@ -4269,6 +4380,8 @@
 	NL80211_MESHCONF_AWAKE_WINDOW,
 	NL80211_MESHCONF_PLINK_TIMEOUT,
 	NL80211_MESHCONF_CONNECTED_TO_GATE,
+	NL80211_MESHCONF_NOLEARN,
+	NL80211_MESHCONF_CONNECTED_TO_AS,
 
 	/* keep last */
 	__NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -4437,6 +4550,11 @@
  *	attribute must be provided as well
  * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel
  * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_1: 1 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_2: 2 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel
  */
 enum nl80211_chan_width {
 	NL80211_CHAN_WIDTH_20_NOHT,
@@ -4447,6 +4565,11 @@
 	NL80211_CHAN_WIDTH_160,
 	NL80211_CHAN_WIDTH_5,
 	NL80211_CHAN_WIDTH_10,
+	NL80211_CHAN_WIDTH_1,
+	NL80211_CHAN_WIDTH_2,
+	NL80211_CHAN_WIDTH_4,
+	NL80211_CHAN_WIDTH_8,
+	NL80211_CHAN_WIDTH_16,
 };
 
 /**
@@ -4457,11 +4580,15 @@
  * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible
  * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide
  * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide
+ * @NL80211_BSS_CHAN_WIDTH_1: control channel is 1 MHz wide
+ * @NL80211_BSS_CHAN_WIDTH_2: control channel is 2 MHz wide
  */
 enum nl80211_bss_scan_width {
 	NL80211_BSS_CHAN_WIDTH_20,
 	NL80211_BSS_CHAN_WIDTH_10,
 	NL80211_BSS_CHAN_WIDTH_5,
+	NL80211_BSS_CHAN_WIDTH_1,
+	NL80211_BSS_CHAN_WIDTH_2,
 };
 
 /**
@@ -4702,6 +4829,10 @@
  * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
  *	see &struct nl80211_txrate_vht
  * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
+ * @NL80211_TXRATE_HE: HE rates allowed for TX rate selection,
+ *	see &struct nl80211_txrate_he
+ * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us.
+ * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF.
  * @__NL80211_TXRATE_AFTER_LAST: internal
  * @NL80211_TXRATE_MAX: highest TX rate attribute
  */
@@ -4711,6 +4842,9 @@
 	NL80211_TXRATE_HT,
 	NL80211_TXRATE_VHT,
 	NL80211_TXRATE_GI,
+	NL80211_TXRATE_HE,
+	NL80211_TXRATE_HE_GI,
+	NL80211_TXRATE_HE_LTF,
 
 	/* keep last */
 	__NL80211_TXRATE_AFTER_LAST,
@@ -4728,6 +4862,15 @@
 	__u16 mcs[NL80211_VHT_NSS_MAX];
 };
 
+#define NL80211_HE_NSS_MAX		8
+/**
+ * struct nl80211_txrate_he - HE MCS/NSS txrate bitmap
+ * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)
+ */
+struct nl80211_txrate_he {
+	__u16 mcs[NL80211_HE_NSS_MAX];
+};
+
 enum nl80211_txrate_gi {
 	NL80211_TXRATE_DEFAULT_GI,
 	NL80211_TXRATE_FORCE_SGI,
@@ -4740,6 +4883,7 @@
  * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
  * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
  * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
+ * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs
  * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
  *	since newer kernel versions may support more bands
  */
@@ -4748,6 +4892,7 @@
 	NL80211_BAND_5GHZ,
 	NL80211_BAND_60GHZ,
 	NL80211_BAND_6GHZ,
+	NL80211_BAND_S1GHZ,
 
 	NUM_NL80211_BANDS,
 };
@@ -5636,7 +5781,7 @@
  * enum nl80211_ext_feature_index - bit index of extended features.
  * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
  * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can
- *	can request to use RRM (see %NL80211_ATTR_USE_RRM) with
+ *	request to use RRM (see %NL80211_ATTR_USE_RRM) with
  *	%NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
  *	the ASSOC_REQ_USE_RRM flag in the association request even if
  *	NL80211_FEATURE_QUIET is not advertized.
@@ -5773,6 +5918,25 @@
  * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver
  *	can report tx status for control port over nl80211 tx operations.
  *
+ * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating
+ *	Channel Validation (OCV) when using driver's SME for RSNA handshakes.
+ *
+ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK: Device wants to do 4-way
+ *	handshake with PSK in AP mode (PSK is passed as part of the start AP
+ *	command).
+ *
+ * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication
+ *	in AP mode (SAE password is passed as part of the start AP command).
+ *
+ * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery
+ *	frames transmission
+ *
+ * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
+ *	unsolicited broadcast probe response transmission
+ *
+ * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
+ *	configuration (AP/mesh) with HE rates.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -5828,6 +5992,12 @@
 	NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT,
 	NL80211_EXT_FEATURE_SCAN_FREQ_KHZ,
 	NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS,
+	NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION,
+	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK,
+	NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
+	NL80211_EXT_FEATURE_FILS_DISCOVERY,
+	NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
+	NL80211_EXT_FEATURE_BEACON_RATE_HE,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -5942,6 +6112,8 @@
  * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with
  *	%NL80211_ATTR_SCAN_FREQ_KHZ. This also means
  *	%NL80211_ATTR_SCAN_FREQUENCIES will not be included.
+ * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by
+ *	2.4/5 GHz APs
  */
 enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
@@ -5958,6 +6130,7 @@
 	NL80211_SCAN_FLAG_RANDOM_SN				= 1<<11,
 	NL80211_SCAN_FLAG_MIN_PREQ_CONTENT			= 1<<12,
 	NL80211_SCAN_FLAG_FREQ_KHZ				= 1<<13,
+	NL80211_SCAN_FLAG_COLOCATED_6GHZ			= 1<<14,
 };
 
 /**
@@ -6045,7 +6218,7 @@
 };
 
 /**
- * enum enum nl80211_protocol_features - nl80211 protocol features
+ * enum nl80211_protocol_features - nl80211 protocol features
  * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting
  *	wiphy dumps (if requested by the application with the attribute
  *	%NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the
@@ -6860,6 +7033,13 @@
  *
  * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset.
  * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset.
+ * @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum
+ *	tx power offset.
+ * @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color
+ *	values used by members of the SRG.
+ * @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial
+ *	BSSID values used by members of the SRG.
+ * @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element.
  *
  * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal
  * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
@@ -6869,6 +7049,10 @@
 
 	NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET,
 	NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET,
+	NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET,
+	NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP,
+	NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP,
+	NL80211_HE_OBSS_PD_ATTR_SR_CTRL,
 
 	/* keep last */
 	__NL80211_HE_OBSS_PD_ATTR_LAST,
@@ -6922,4 +7106,175 @@
 	NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1,
 };
 
+/**
+ * enum nl80211_fils_discovery_attributes - FILS discovery configuration
+ * from IEEE Std 802.11ai-2016, Annex C.3 MIB detail.
+ *
+ * @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid
+ *
+ * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU).
+ *	Allowed range: 0..10000 (TU = Time Unit)
+ * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU).
+ *	Allowed range: 0..10000 (TU = Time Unit)
+ * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action
+ *	frame including the headers.
+ *
+ * @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal
+ * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute
+ */
+enum nl80211_fils_discovery_attributes {
+	__NL80211_FILS_DISCOVERY_ATTR_INVALID,
+
+	NL80211_FILS_DISCOVERY_ATTR_INT_MIN,
+	NL80211_FILS_DISCOVERY_ATTR_INT_MAX,
+	NL80211_FILS_DISCOVERY_ATTR_TMPL,
+
+	/* keep last */
+	__NL80211_FILS_DISCOVERY_ATTR_LAST,
+	NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 1
+};
+
+/*
+ * FILS discovery template minimum length with action frame headers and
+ * mandatory fields.
+ */
+#define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 42
+
+/**
+ * enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe
+ *	response configuration. Applicable only in 6GHz.
+ *
+ * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid
+ *
+ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU).
+ *	Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0
+ *	26.17.2.3.2 (AP behavior for fast passive scanning).
+ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response
+ *	frame template (binary).
+ *
+ * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal
+ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute
+ */
+enum nl80211_unsol_bcast_probe_resp_attributes {
+	__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID,
+
+	NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT,
+	NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL,
+
+	/* keep last */
+	__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST,
+	NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
+		__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
+};
+
+/**
+ * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE
+ *	derivation. Applicable only when WPA3-Personal SAE authentication is
+ *	used.
+ *
+ * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that
+ *	attribute is not present from userspace.
+ * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only
+ * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only
+ * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element
+ *	can be used.
+ */
+enum nl80211_sae_pwe_mechanism {
+	NL80211_SAE_PWE_UNSPECIFIED,
+	NL80211_SAE_PWE_HUNT_AND_PECK,
+	NL80211_SAE_PWE_HASH_TO_ELEMENT,
+	NL80211_SAE_PWE_BOTH,
+};
+
+/**
+ * enum nl80211_sar_type - type of SAR specs
+ *
+ * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
+ *
+ */
+enum nl80211_sar_type {
+	NL80211_SAR_TYPE_POWER,
+
+	/* add new type here */
+
+	/* Keep last */
+	NUM_NL80211_SAR_TYPE,
+};
+
+/**
+ * enum nl80211_sar_attrs - Attributes for SAR spec
+ *
+ * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
+ *
+ * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
+ *	limit specifications. Each specification contains a set
+ *	of %nl80211_sar_specs_attrs.
+ *
+ *	For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER
+ *	and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX.
+ *
+ *	For sar_capa dump, it contains array of
+ *	%NL80211_SAR_ATTR_SPECS_START_FREQ
+ *	and %NL80211_SAR_ATTR_SPECS_END_FREQ.
+ *
+ * @__NL80211_SAR_ATTR_LAST: Internal
+ * @NL80211_SAR_ATTR_MAX: highest sar attribute
+ *
+ * These attributes are used with %NL80211_CMD_SET_SAR_SPEC
+ */
+enum nl80211_sar_attrs {
+	__NL80211_SAR_ATTR_INVALID,
+
+	NL80211_SAR_ATTR_TYPE,
+	NL80211_SAR_ATTR_SPECS,
+
+	__NL80211_SAR_ATTR_LAST,
+	NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
+ *
+ * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
+ *	power limit value in units of 0.25 dBm if type is
+ *	NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
+ *	0 means userspace doesn't have SAR limitation on this associated range.
+ *
+ * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the
+ *	index of exported freq range table and the associated power limitation
+ *	is applied to this range.
+ *
+ *	Userspace isn't required to set all the ranges advertised by WLAN driver,
+ *	and userspace can skip some certain ranges. These skipped ranges don't
+ *	have SAR limitations, and they are same as setting the
+ *	%NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any
+ *	value higher than regulatory allowed value just means SAR power
+ *	limitation is removed, but it's required to set at least one range.
+ *	It's not allowed to set duplicated range in one SET operation.
+ *
+ *	Every SET operation overwrites previous SET operation.
+ *
+ * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start
+ *	frequency of this range edge when registering SAR capability to wiphy.
+ *	It's not a channel center frequency. The unit is kHz.
+ *
+ * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end
+ *	frequency of this range edge when registering SAR capability to wiphy.
+ *	It's not a channel center frequency. The unit is kHz.
+ *
+ * @__NL80211_SAR_ATTR_SPECS_LAST: Internal
+ * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
+ */
+enum nl80211_sar_specs_attrs {
+	__NL80211_SAR_ATTR_SPECS_INVALID,
+
+	NL80211_SAR_ATTR_SPECS_POWER,
+	NL80211_SAR_ATTR_SPECS_RANGE_INDEX,
+	NL80211_SAR_ATTR_SPECS_START_FREQ,
+	NL80211_SAR_ATTR_SPECS_END_FREQ,
+
+	__NL80211_SAR_ATTR_SPECS_LAST,
+	NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/src/eap_peer/eap_aka.c b/src/eap_peer/eap_aka.c
index e57461a..8c475f1 100644
--- a/src/eap_peer/eap_aka.c
+++ b/src/eap_peer/eap_aka.c
@@ -442,19 +442,28 @@
 
 
 static int eap_aka_add_id_msg(struct eap_aka_data *data,
-			      const struct wpabuf *msg)
+			      const struct wpabuf *msg1,
+			      const struct wpabuf *msg2)
 {
-	if (msg == NULL)
-		return -1;
+	size_t len;
 
-	if (data->id_msgs == NULL) {
-		data->id_msgs = wpabuf_dup(msg);
-		return data->id_msgs == NULL ? -1 : 0;
+	if (!msg1)
+		return -1;
+	len = wpabuf_len(msg1);
+	if (msg2)
+		len += wpabuf_len(msg2);
+
+	if (!data->id_msgs) {
+		data->id_msgs = wpabuf_alloc(len);
+		if (!data->id_msgs)
+			return -1;
+	} else if (wpabuf_resize(&data->id_msgs, len) < 0) {
+		return -1;
 	}
 
-	if (wpabuf_resize(&data->id_msgs, wpabuf_len(msg)) < 0)
-		return -1;
-	wpabuf_put_buf(data->id_msgs, msg);
+	wpabuf_put_buf(data->id_msgs, msg1);
+	if (msg2)
+		wpabuf_put_buf(data->id_msgs, msg2);
 
 	return 0;
 }
@@ -799,8 +808,13 @@
 	buf = eap_aka_response_identity(sm, data, id, attr->id_req);
 
 	if (data->prev_id != id) {
-		eap_aka_add_id_msg(data, reqData);
-		eap_aka_add_id_msg(data, buf);
+		if (eap_aka_add_id_msg(data, reqData, buf) < 0) {
+			wpa_printf(MSG_INFO,
+				   "EAP-AKA: Failed to store ID messages");
+			wpabuf_free(buf);
+			return eap_aka_client_error(
+				data, id, EAP_AKA_UNABLE_TO_PROCESS_PACKET);
+		}
 		data->prev_id = id;
 	}
 
diff --git a/src/eap_peer/eap_peap.c b/src/eap_peer/eap_peap.c
index 7c37043..12e30df 100644
--- a/src/eap_peer/eap_peap.c
+++ b/src/eap_peer/eap_peap.c
@@ -803,6 +803,10 @@
 	res = eap_peer_tls_decrypt(sm, &data->ssl, in_data, &in_decrypted);
 	if (res)
 		return res;
+	if (wpabuf_len(in_decrypted) == 0) {
+		wpabuf_free(in_decrypted);
+		return 1;
+	}
 
 continue_req:
 	wpa_hexdump_buf(MSG_DEBUG, "EAP-PEAP: Decrypted Phase 2 EAP",
@@ -1081,7 +1085,11 @@
 		}
 
 		if (tls_connection_established(sm->ssl_ctx, data->ssl.conn)) {
-			char *label;
+			const char *label;
+			const u8 eap_tls13_context[1] = { EAP_TYPE_PEAP };
+			const u8 *context = NULL;
+			size_t context_len = 0;
+
 			wpa_printf(MSG_DEBUG,
 				   "EAP-PEAP: TLS done, proceed to Phase 2");
 			eap_peap_free_key(data);
@@ -1091,16 +1099,25 @@
 			 * PEAPv1 implementations seem to be using the old
 			 * label, "client EAP encryption", instead. Use the old
 			 * label by default, but allow it to be configured with
-			 * phase1 parameter peaplabel=1. */
-			if (data->force_new_label)
+			 * phase1 parameter peaplabel=1.
+			 *
+			 * When using TLS 1.3, draft-ietf-emu-tls-eap-types
+			 * defines a new set of label and context parameters.
+			 */
+			if (data->ssl.tls_v13) {
+				label = "EXPORTER_EAP_TLS_Key_Material";
+				context = eap_tls13_context;
+				context_len = sizeof(eap_tls13_context);
+			} else if (data->force_new_label) {
 				label = "client PEAP encryption";
-			else
+			} else {
 				label = "client EAP encryption";
+			}
 			wpa_printf(MSG_DEBUG, "EAP-PEAP: using label '%s' in "
 				   "key derivation", label);
 			data->key_data =
 				eap_peer_tls_derive_key(sm, &data->ssl, label,
-							NULL, 0,
+							context, context_len,
 							EAP_TLS_KEY_LEN +
 							EAP_EMSK_LEN);
 			if (data->key_data) {
diff --git a/src/eap_peer/eap_tls.c b/src/eap_peer/eap_tls.c
index ad079a7..0d479f1 100644
--- a/src/eap_peer/eap_tls.c
+++ b/src/eap_peer/eap_tls.c
@@ -302,15 +302,11 @@
 		return NULL;
 	}
 
-	if (res == 2) {
-		/* Application data included in the handshake message (used by
-		 * EAP-TLS 1.3 to indicate conclusion of the exchange). */
-		wpa_hexdump_buf(MSG_DEBUG, "EAP-TLS: Received Application Data",
-				resp);
-		wpa_hexdump_buf(MSG_DEBUG, "EAP-TLS: Remaining tls_out data",
-				data->ssl.tls_out);
+	/* draft-ietf-emu-eap-tls13-13 Section 2.5 */
+	if (res == 2 && data->ssl.tls_v13 && wpabuf_len(resp) == 1 &&
+	    *wpabuf_head_u8(resp) == 0) {
+		wpa_printf(MSG_DEBUG, "EAP-TLS: ACKing Commitment Message");
 		eap_peer_tls_reset_output(&data->ssl);
-		/* Send an ACK to allow the server to complete exchange */
 		res = 1;
 	}
 
diff --git a/src/eap_peer/eap_tls_common.c b/src/eap_peer/eap_tls_common.c
index ab10678..c1837db 100644
--- a/src/eap_peer/eap_tls_common.c
+++ b/src/eap_peer/eap_tls_common.c
@@ -413,9 +413,9 @@
 	struct tls_random keys;
 	u8 *out;
 
-	if (eap_type == EAP_TYPE_TLS && data->tls_v13) {
+	if (data->tls_v13) {
 		u8 *id, *method_id;
-		const u8 context[] = { EAP_TYPE_TLS };
+		const u8 context[] = { eap_type };
 
 		/* Session-Id = <EAP-Type> || Method-Id
 		 * Method-Id = TLS-Exporter("EXPORTER_EAP_TLS_Method-Id",
diff --git a/src/eap_peer/eap_ttls.c b/src/eap_peer/eap_ttls.c
index 642d179..c401915 100644
--- a/src/eap_peer/eap_ttls.c
+++ b/src/eap_peer/eap_ttls.c
@@ -268,10 +268,22 @@
 static int eap_ttls_v0_derive_key(struct eap_sm *sm,
 				  struct eap_ttls_data *data)
 {
+	const char *label;
+	const u8 eap_tls13_context[1] = { EAP_TYPE_TTLS };
+	const u8 *context = NULL;
+	size_t context_len = 0;
+
+	if (data->ssl.tls_v13) {
+		label = "EXPORTER_EAP_TLS_Key_Material";
+		context = eap_tls13_context;
+		context_len = sizeof(eap_tls13_context);
+	} else {
+		label = "ttls keying material";
+	}
+
 	eap_ttls_free_key(data);
-	data->key_data = eap_peer_tls_derive_key(sm, &data->ssl,
-						 "ttls keying material",
-						 NULL, 0,
+	data->key_data = eap_peer_tls_derive_key(sm, &data->ssl, label,
+						 context, context_len,
 						 EAP_TLS_KEY_LEN +
 						 EAP_EMSK_LEN);
 	if (!data->key_data) {
@@ -1441,6 +1453,7 @@
 
 	if ((in_data == NULL || wpabuf_len(in_data) == 0) &&
 	    data->phase2_start) {
+start:
 		return eap_ttls_phase2_start(sm, data, ret, identifier,
 					     out_data);
 	}
@@ -1455,6 +1468,20 @@
 	retval = eap_peer_tls_decrypt(sm, &data->ssl, in_data, &in_decrypted);
 	if (retval)
 		goto done;
+	if (wpabuf_len(in_decrypted) == 0) {
+		wpabuf_free(in_decrypted);
+		goto start;
+	}
+
+	/* draft-ietf-emu-eap-tls13-13 Section 2.5 */
+	if (data->ssl.tls_v13 && wpabuf_len(in_decrypted) == 1 &&
+	    *wpabuf_head_u8(in_decrypted) == 0) {
+		wpa_printf(MSG_DEBUG,
+			   "EAP-TTLS: ACKing EAP-TLS Commitment Message");
+		eap_peer_tls_reset_output(&data->ssl);
+		wpabuf_free(in_decrypted);
+		return 1;
+	}
 
 continue_req:
 	data->phase2_start = 0;
diff --git a/src/eap_peer/ikev2.c b/src/eap_peer/ikev2.c
index 7bd97b1..c2e6c5d 100644
--- a/src/eap_peer/ikev2.c
+++ b/src/eap_peer/ikev2.c
@@ -201,7 +201,8 @@
 				const u8 *pos, const u8 *end)
 {
 	const u8 *pend, *ppos;
-	int proposal_len, i;
+	int proposal_len;
+	unsigned int i, num;
 	const struct ikev2_proposal *p;
 
 	if (end - pos < (int) sizeof(*p)) {
@@ -269,12 +270,13 @@
 		return -1;
 	}
 
-	if (p->num_transforms == 0) {
+	num = p->num_transforms;
+	if (num == 0 || num > 255) {
 		wpa_printf(MSG_INFO, "IKEV2: At least one transform required");
 		return -1;
 	}
 
-	for (i = 0; i < (int) p->num_transforms; i++) {
+	for (i = 0; i < num; i++) {
 		int tlen = ikev2_parse_transform(prop, ppos, pend);
 		if (tlen < 0)
 			return -1;
@@ -411,7 +413,7 @@
 
 	wpa_hexdump_buf(MSG_DEBUG, "IKEV2: KEi Diffie-Hellman Public Value",
 			data->i_dh_public);
-	
+
 	return 0;
 }
 
diff --git a/src/eap_server/eap_server_peap.c b/src/eap_server/eap_server_peap.c
index f234f6f..f526e8b 100644
--- a/src/eap_server/eap_server_peap.c
+++ b/src/eap_server/eap_server_peap.c
@@ -325,13 +325,27 @@
 	u8 *tk;
 	u8 isk[32], imck[60];
 	int res;
+	const char *label;
+	const u8 eap_tls13_context[1] = { EAP_TYPE_PEAP };
+	const u8 *context = NULL;
+	size_t context_len = 0;
+
+	if (data->ssl.tls_v13) {
+		label = "EXPORTER_EAP_TLS_Key_Material";
+		context = eap_tls13_context;
+		context_len = sizeof(eap_tls13_context);
+	} else {
+		/* TODO: PEAPv1 - different label in some cases */
+		label = "client EAP encryption";
+	}
 
 	/*
 	 * Tunnel key (TK) is the first 60 octets of the key generated by
 	 * phase 1 of PEAP (based on TLS).
 	 */
-	tk = eap_server_tls_derive_key(sm, &data->ssl, "client EAP encryption",
-				       NULL, 0, EAP_TLS_KEY_LEN);
+	tk = eap_server_tls_derive_key(sm, &data->ssl, label,
+				       context, context_len,
+				       EAP_TLS_KEY_LEN);
 	if (tk == NULL)
 		return -1;
 	wpa_hexdump_key(MSG_DEBUG, "EAP-PEAP: TK", tk, 60);
@@ -498,7 +512,25 @@
 	encr_req = eap_server_tls_encrypt(sm, &data->ssl, &msgbuf);
 	os_free(hdr);
 
-	return encr_req;
+	if (!data->ssl.tls_v13 ||
+	    !tls_connection_resumed(sm->cfg->ssl_ctx, data->ssl.conn)) {
+		wpabuf_free(data->ssl.tls_out);
+		data->ssl.tls_out_pos = 0;
+		return encr_req;
+	}
+
+	if (wpabuf_resize(&data->ssl.tls_out, wpabuf_len(encr_req)) < 0) {
+		wpa_printf(MSG_INFO,
+			   "EAP-PEAP: Failed to resize output buffer");
+		wpabuf_free(encr_req);
+		return NULL;
+	}
+	wpabuf_put_buf(data->ssl.tls_out, encr_req);
+	wpa_hexdump_buf(MSG_DEBUG,
+			"EAP-PEAP: Data appended to the message", encr_req);
+	os_free(encr_req);
+
+	return data->ssl.tls_out;
 }
 
 
@@ -547,8 +579,6 @@
 		data->ssl.tls_out = eap_peap_build_phase2_tlv(sm, data, id);
 		break;
 	case SUCCESS_REQ:
-		wpabuf_free(data->ssl.tls_out);
-		data->ssl.tls_out_pos = 0;
 		data->ssl.tls_out = eap_peap_build_phase2_term(sm, data, id,
 							       1);
 		break;
@@ -1300,6 +1330,10 @@
 {
 	struct eap_peap_data *data = priv;
 	u8 *eapKeyData;
+	const char *label;
+	const u8 eap_tls13_context[1] = { EAP_TYPE_PEAP };
+	const u8 *context = NULL;
+	size_t context_len = 0;
 
 	if (data->state != SUCCESS)
 		return NULL;
@@ -1332,9 +1366,17 @@
 		return eapKeyData;
 	}
 
-	/* TODO: PEAPv1 - different label in some cases */
+	if (data->ssl.tls_v13) {
+		label = "EXPORTER_EAP_TLS_Key_Material";
+		context = eap_tls13_context;
+		context_len = sizeof(eap_tls13_context);
+	} else {
+		/* TODO: PEAPv1 - different label in some cases */
+		label = "client EAP encryption";
+	}
+
 	eapKeyData = eap_server_tls_derive_key(sm, &data->ssl,
-					       "client EAP encryption", NULL, 0,
+					       label, context, context_len,
 					       EAP_TLS_KEY_LEN + EAP_EMSK_LEN);
 	if (eapKeyData) {
 		os_memset(eapKeyData + EAP_TLS_KEY_LEN, 0, EAP_EMSK_LEN);
@@ -1353,6 +1395,10 @@
 {
 	struct eap_peap_data *data = priv;
 	u8 *eapKeyData, *emsk;
+	const char *label;
+	const u8 eap_tls13_context[1] = { EAP_TYPE_PEAP };
+	const u8 *context = NULL;
+	size_t context_len = 0;
 
 	if (data->state != SUCCESS)
 		return NULL;
@@ -1362,9 +1408,17 @@
 		return NULL;
 	}
 
-	/* TODO: PEAPv1 - different label in some cases */
+	if (data->ssl.tls_v13) {
+		label = "EXPORTER_EAP_TLS_Key_Material";
+		context = eap_tls13_context;
+		context_len = sizeof(eap_tls13_context);
+	} else {
+		/* TODO: PEAPv1 - different label in some cases */
+		label = "client EAP encryption";
+	}
+
 	eapKeyData = eap_server_tls_derive_key(sm, &data->ssl,
-					       "client EAP encryption", NULL, 0,
+					       label, context, context_len,
 					       EAP_TLS_KEY_LEN + EAP_EMSK_LEN);
 	if (eapKeyData) {
 		emsk = os_memdup(eapKeyData + EAP_TLS_KEY_LEN, EAP_EMSK_LEN);
diff --git a/src/eap_server/eap_server_tls.c b/src/eap_server/eap_server_tls.c
index 769fd1f..00a496f 100644
--- a/src/eap_server/eap_server_tls.c
+++ b/src/eap_server/eap_server_tls.c
@@ -266,39 +266,6 @@
 		eap_tls_state(data, FAILURE);
 		return;
 	}
-
-	if (data->ssl.tls_v13 &&
-	    tls_connection_established(sm->cfg->ssl_ctx, data->ssl.conn)) {
-		struct wpabuf *plain, *encr;
-
-		wpa_printf(MSG_DEBUG,
-			   "EAP-TLS: Send empty application data to indicate end of exchange");
-		/* FIX: This should be an empty application data based on
-		 * draft-ietf-emu-eap-tls13-05, but OpenSSL does not allow zero
-		 * length payload (SSL_write() documentation explicitly
-		 * describes this as not allowed), so work around that for now
-		 * by sending out a payload of one octet. Hopefully the draft
-		 * specification will change to allow this so that no crypto
-		 * library changes are needed. */
-		plain = wpabuf_alloc(1);
-		if (!plain)
-			return;
-		wpabuf_put_u8(plain, 0);
-		encr = eap_server_tls_encrypt(sm, &data->ssl, plain);
-		wpabuf_free(plain);
-		if (!encr)
-			return;
-		if (wpabuf_resize(&data->ssl.tls_out, wpabuf_len(encr)) < 0) {
-			wpa_printf(MSG_INFO,
-				   "EAP-TLS: Failed to resize output buffer");
-			wpabuf_free(encr);
-			return;
-		}
-		wpabuf_put_buf(data->ssl.tls_out, encr);
-		wpa_hexdump_buf(MSG_DEBUG,
-				"EAP-TLS: Data appended to the message", encr);
-		wpabuf_free(encr);
-	}
 }
 
 
diff --git a/src/eap_server/eap_server_tls_common.c b/src/eap_server/eap_server_tls_common.c
index b38f1e0..a9b53b1 100644
--- a/src/eap_server/eap_server_tls_common.c
+++ b/src/eap_server/eap_server_tls_common.c
@@ -146,10 +146,10 @@
 {
 	struct tls_random keys;
 	u8 *out;
-	const u8 context[] = { EAP_TYPE_TLS };
 
-	if (eap_type == EAP_TYPE_TLS && data->tls_v13) {
+	if (data->tls_v13) {
 		u8 *id, *method_id;
+		const u8 context[] = { eap_type };
 
 		/* Session-Id = <EAP-Type> || Method-Id
 		 * Method-Id = TLS-Exporter("EXPORTER_EAP_TLS_Method-Id",
@@ -366,6 +366,56 @@
 		sm->serial_num = tls_connection_peer_serial_num(
 			sm->cfg->ssl_ctx, data->conn);
 
+	/*
+	 * https://tools.ietf.org/html/draft-ietf-emu-eap-tls13#section-2.5
+	 *
+	 * We need to signal the other end that TLS negotiation is done. We
+	 * can't send a zero-length application data message, so we send
+	 * application data which is one byte of zero.
+	 *
+	 * Note this is only done for when there is no application data to be
+	 * sent. So this is done always for EAP-TLS but notibly not for PEAP
+	 * even on resumption.
+	 */
+	if (data->tls_v13 &&
+	    tls_connection_established(sm->cfg->ssl_ctx, data->conn)) {
+		struct wpabuf *plain, *encr;
+
+		switch (sm->currentMethod) {
+		case EAP_TYPE_PEAP:
+			break;
+		default:
+			if (!tls_connection_resumed(sm->cfg->ssl_ctx,
+						    data->conn))
+				break;
+			/* fallthrough */
+		case EAP_TYPE_TLS:
+			wpa_printf(MSG_DEBUG,
+				   "EAP-TLS: Send Commitment Message");
+
+			plain = wpabuf_alloc(1);
+			if (!plain)
+				return -1;
+			wpabuf_put_u8(plain, 0);
+			encr = eap_server_tls_encrypt(sm, data, plain);
+			wpabuf_free(plain);
+			if (!encr)
+				return -1;
+			if (wpabuf_resize(&data->tls_out, wpabuf_len(encr)) < 0)
+			{
+				wpa_printf(MSG_INFO,
+					   "EAP-TLS: Failed to resize output buffer");
+				wpabuf_free(encr);
+				return -1;
+			}
+			wpabuf_put_buf(data->tls_out, encr);
+			wpa_hexdump_buf(MSG_DEBUG,
+					"EAP-TLS: Data appended to the message",
+					encr);
+			wpabuf_free(encr);
+		}
+	}
+
 	return 0;
 }
 
diff --git a/src/eap_server/eap_server_ttls.c b/src/eap_server/eap_server_ttls.c
index 2f0c041..b893522 100644
--- a/src/eap_server/eap_server_ttls.c
+++ b/src/eap_server/eap_server_ttls.c
@@ -1271,13 +1271,25 @@
 {
 	struct eap_ttls_data *data = priv;
 	u8 *eapKeyData;
+	const char *label;
+	const u8 eap_tls13_context[1] = { EAP_TYPE_TTLS };
+	const u8 *context = NULL;
+	size_t context_len = 0;
 
 	if (data->state != SUCCESS)
 		return NULL;
 
+	if (data->ssl.tls_v13) {
+		label = "EXPORTER_EAP_TLS_Key_Material";
+		context = eap_tls13_context;
+		context_len = sizeof(eap_tls13_context);
+	} else {
+		label = "ttls keying material";
+	}
+
 	eapKeyData = eap_server_tls_derive_key(sm, &data->ssl,
-					       "ttls keying material", NULL, 0,
-					       EAP_TLS_KEY_LEN);
+					       label, context, context_len,
+					       EAP_TLS_KEY_LEN + EAP_EMSK_LEN);
 	if (eapKeyData) {
 		*len = EAP_TLS_KEY_LEN;
 		wpa_hexdump_key(MSG_DEBUG, "EAP-TTLS: Derived key",
@@ -1313,12 +1325,24 @@
 {
 	struct eap_ttls_data *data = priv;
 	u8 *eapKeyData, *emsk;
+	const char *label;
+	const u8 eap_tls13_context[1] = { EAP_TYPE_TTLS };
+	const u8 *context = NULL;
+	size_t context_len = 0;
 
 	if (data->state != SUCCESS)
 		return NULL;
 
+	if (data->ssl.tls_v13) {
+		label = "EXPORTER_EAP_TLS_Key_Material";
+		context = eap_tls13_context;
+		context_len = sizeof(eap_tls13_context);
+	} else {
+		label = "ttls keying material";
+	}
+
 	eapKeyData = eap_server_tls_derive_key(sm, &data->ssl,
-					       "ttls keying material", NULL, 0,
+					       label, context, context_len,
 					       EAP_TLS_KEY_LEN + EAP_EMSK_LEN);
 	if (eapKeyData) {
 		emsk = os_malloc(EAP_EMSK_LEN);
diff --git a/src/p2p/p2p.c b/src/p2p/p2p.c
index 360ca60..8b443d6 100644
--- a/src/p2p/p2p.c
+++ b/src/p2p/p2p.c
@@ -668,6 +668,8 @@
 		if (wpabuf_resize(&dev->info.vendor_elems, 2 + len) < 0)
 			break;
 		wpabuf_put_data(dev->info.vendor_elems, pos - 2, 2 + len);
+		if (wpabuf_size(dev->info.vendor_elems) > 2000)
+			break;
 	}
 }
 
@@ -2923,6 +2925,14 @@
 }
 
 
+bool is_p2p_6ghz_disabled(struct p2p_data *p2p)
+{
+	if (p2p)
+		return p2p->cfg->p2p_6ghz_disable;
+	return false;
+}
+
+
 struct p2p_data * p2p_init(const struct p2p_config *cfg)
 {
 	struct p2p_data *p2p;
@@ -3512,12 +3522,17 @@
 }
 
 
-void p2p_scan_res_handled(struct p2p_data *p2p)
+void p2p_scan_res_handled(struct p2p_data *p2p, unsigned int delay)
 {
 	if (!p2p->p2p_scan_running) {
 		p2p_dbg(p2p, "p2p_scan was not running, but scan results received");
 	}
 	p2p->p2p_scan_running = 0;
+
+	/* Use this delay only when p2p_find doesn't set it */
+	if (!p2p->search_delay)
+		p2p->search_delay = delay;
+
 	eloop_cancel_timeout(p2p_scan_timeout, p2p, NULL);
 
 	if (p2p_run_after_scan(p2p))
diff --git a/src/p2p/p2p.h b/src/p2p/p2p.h
index 2dae6c6..762bd40 100644
--- a/src/p2p/p2p.h
+++ b/src/p2p/p2p.h
@@ -501,6 +501,11 @@
 	struct p2p_channel *pref_chan;
 
 	/**
+	 * p2p_6ghz_disable - Disable 6GHz for P2P operations
+	 */
+	bool p2p_6ghz_disable;
+
+	/**
 	 * pri_dev_type - Primary Device Type (see WPS)
 	 */
 	u8 pri_dev_type[8];
@@ -1620,6 +1625,7 @@
 /**
  * p2p_scan_res_handled - Indicate end of scan results
  * @p2p: P2P module context from p2p_init()
+ * @delay: Search delay for next scan in ms
  *
  * This function is called to indicate that all P2P scan results from a scan
  * have been reported with zero or more calls to p2p_scan_res_handler(). This
@@ -1627,7 +1633,7 @@
  * struct p2p_config::p2p_scan() call if none of the p2p_scan_res_handler()
  * calls stopped iteration.
  */
-void p2p_scan_res_handled(struct p2p_data *p2p);
+void p2p_scan_res_handled(struct p2p_data *p2p, unsigned int delay);
 
 enum p2p_send_action_result {
 	P2P_SEND_ACTION_SUCCESS /* Frame was send and acknowledged */,
@@ -2100,6 +2106,8 @@
 			     const struct p2p_channels *chan,
 			     const struct p2p_channels *cli_chan);
 
+bool is_p2p_6ghz_disabled(struct p2p_data *p2p);
+
 /**
  * p2p_set_best_channels - Update best channel information
  * @p2p: P2P module context from p2p_init()
diff --git a/src/radius/radius.h b/src/radius/radius.h
index 630c0f9..fb81481 100644
--- a/src/radius/radius.h
+++ b/src/radius/radius.h
@@ -225,6 +225,9 @@
 /* Default size to be allocated for attribute array */
 #define RADIUS_DEFAULT_ATTR_COUNT 16
 
+/* Maximum message length for incoming RADIUS messages, as stated in RFC 2865
+ * Section 3 ("Packet Format").*/
+#define RADIUS_MAX_MSG_LEN 4096
 
 /* MAC address ASCII format for IEEE 802.1X use
  * (draft-congdon-radius-8021x-20.txt) */
diff --git a/src/radius/radius_client.c b/src/radius/radius_client.c
index 2b7a604..bfcb944 100644
--- a/src/radius/radius_client.c
+++ b/src/radius/radius_client.c
@@ -816,7 +816,9 @@
 	struct hostapd_radius_servers *conf = radius->conf;
 	RadiusType msg_type = (RadiusType) sock_ctx;
 	int len, roundtrip;
-	unsigned char buf[3000];
+	unsigned char buf[RADIUS_MAX_MSG_LEN];
+	struct msghdr msghdr = {0};
+	struct iovec iov;
 	struct radius_msg *msg;
 	struct radius_hdr *hdr;
 	struct radius_rx_handler *handlers;
@@ -836,15 +838,22 @@
 		rconf = conf->auth_server;
 	}
 
-	len = recv(sock, buf, sizeof(buf), MSG_DONTWAIT);
+	iov.iov_base = buf;
+	iov.iov_len = RADIUS_MAX_MSG_LEN;
+	msghdr.msg_iov = &iov;
+	msghdr.msg_iovlen = 1;
+	msghdr.msg_flags = 0;
+	len = recvmsg(sock, &msghdr, MSG_DONTWAIT);
 	if (len < 0) {
-		wpa_printf(MSG_INFO, "recv[RADIUS]: %s", strerror(errno));
+		wpa_printf(MSG_INFO, "recvmsg[RADIUS]: %s", strerror(errno));
 		return;
 	}
+
 	hostapd_logger(radius->ctx, NULL, HOSTAPD_MODULE_RADIUS,
 		       HOSTAPD_LEVEL_DEBUG, "Received %d bytes from RADIUS "
 		       "server", len);
-	if (len == sizeof(buf)) {
+
+	if (msghdr.msg_flags & MSG_TRUNC) {
 		wpa_printf(MSG_INFO, "RADIUS: Possibly too long UDP frame for our buffer - dropping it");
 		return;
 	}
diff --git a/src/radius/radius_server.c b/src/radius/radius_server.c
index 971fe91..e02c215 100644
--- a/src/radius/radius_server.c
+++ b/src/radius/radius_server.c
@@ -35,11 +35,6 @@
  */
 #define RADIUS_MAX_SESSION 1000
 
-/**
- * RADIUS_MAX_MSG_LEN - Maximum message length for incoming RADIUS messages
- */
-#define RADIUS_MAX_MSG_LEN 3000
-
 static const struct eapol_callbacks radius_server_eapol_cb;
 
 struct radius_client;
diff --git a/src/rsn_supp/tdls.c b/src/rsn_supp/tdls.c
index eff8cd8..7c4ef19 100644
--- a/src/rsn_supp/tdls.c
+++ b/src/rsn_supp/tdls.c
@@ -1155,7 +1155,7 @@
 	rbuf = os_zalloc(buf_len + 1);
 	if (rbuf == NULL) {
 		wpa_tdls_peer_free(sm, peer);
-		return -1;
+		return -2;
 	}
 	pos = rbuf;
 
@@ -1174,7 +1174,7 @@
 			"TDLS: Failed to get random data for initiator Nonce");
 		os_free(rbuf);
 		wpa_tdls_peer_free(sm, peer);
-		return -1;
+		return -2;
 	}
 	peer->tk_set = 0; /* A new nonce results in a new TK */
 	wpa_hexdump(MSG_DEBUG, "TDLS: Initiator Nonce for TPK handshake",
@@ -1926,7 +1926,10 @@
 		peer->initiator = 1;
 		wpa_sm_tdls_peer_addset(sm, peer->addr, 1, 0, 0, NULL, 0, NULL,
 					NULL, 0, 0, NULL, 0, NULL, 0, NULL, 0);
-		wpa_tdls_send_tpk_m1(sm, peer);
+		if (wpa_tdls_send_tpk_m1(sm, peer) == -2) {
+			peer = NULL;
+			goto error;
+		}
 	}
 
 	if ((tdls_testing & TDLS_TESTING_IGNORE_AP_PROHIBIT) &&
@@ -2654,6 +2657,7 @@
 {
 	struct wpa_tdls_peer *peer;
 	int tdls_prohibited = sm->tdls_prohibited;
+	int res;
 
 	if (sm->tdls_disabled || !sm->tdls_supported)
 		return -1;
@@ -2693,8 +2697,10 @@
 
 	peer->tpk_in_progress = 1;
 
-	if (wpa_tdls_send_tpk_m1(sm, peer) < 0) {
-		wpa_tdls_disable_peer_link(sm, peer);
+	res = wpa_tdls_send_tpk_m1(sm, peer);
+	if (res < 0) {
+		if (res != -2)
+			wpa_tdls_disable_peer_link(sm, peer);
 		return -1;
 	}
 
diff --git a/src/rsn_supp/wpa.c b/src/rsn_supp/wpa.c
index d028e95..64a6ccb 100644
--- a/src/rsn_supp/wpa.c
+++ b/src/rsn_supp/wpa.c
@@ -579,7 +579,7 @@
 			  const struct wpa_eapol_key *key, struct wpa_ptk *ptk)
 {
 	const u8 *z = NULL;
-	size_t z_len = 0;
+	size_t z_len = 0, kdk_len;
 	int akmp;
 
 #ifdef CONFIG_IEEE80211R
@@ -603,10 +603,19 @@
 		akmp |= WPA_KEY_MGMT_PSK_SHA256;
 	}
 #endif /* CONFIG_OWE */
+
+	if (sm->force_kdk_derivation ||
+	    (sm->secure_ltf && sm->ap_rsnxe && sm->ap_rsnxe_len >= 4 &&
+	     sm->ap_rsnxe[3] & BIT(WLAN_RSNX_CAPAB_SECURE_LTF - 8)))
+		kdk_len = WPA_KDK_MAX_LEN;
+	else
+		kdk_len = 0;
+
 	return wpa_pmk_to_ptk(sm->pmk, sm->pmk_len, "Pairwise key expansion",
 			      sm->own_addr, sm->bssid, sm->snonce,
 			      key->key_nonce, ptk, akmp,
-			      sm->pairwise_cipher, z, z_len);
+			      sm->pairwise_cipher, z, z_len,
+			      kdk_len);
 }
 
 
@@ -948,6 +957,9 @@
 		return -1;
 	}
 
+	wpa_sm_store_ptk(sm, sm->bssid, sm->pairwise_cipher,
+			 sm->dot11RSNAConfigPMKLifetime, &sm->ptk);
+
 	/* TK is not needed anymore in supplicant */
 	os_memset(sm->ptk.tk, 0, WPA_TK_MAX_LEN);
 	sm->ptk.tk_len = 0;
@@ -1306,7 +1318,8 @@
 {
 	size_t len;
 
-	if (!wpa_cipher_valid_mgmt_group(sm->mgmt_group_cipher))
+	if (!wpa_cipher_valid_mgmt_group(sm->mgmt_group_cipher) ||
+	    sm->mgmt_group_cipher == WPA_CIPHER_GTK_NOT_USED)
 		return 0;
 
 	if (ie->igtk) {
@@ -1559,11 +1572,12 @@
 		return -1;
 	}
 
-	if ((sm->ap_rsnxe && !ie->rsnxe) ||
-	    (!sm->ap_rsnxe && ie->rsnxe) ||
-	    (sm->ap_rsnxe && ie->rsnxe &&
-	     (sm->ap_rsnxe_len != ie->rsnxe_len ||
-	      os_memcmp(sm->ap_rsnxe, ie->rsnxe, sm->ap_rsnxe_len) != 0))) {
+	if (sm->proto == WPA_PROTO_RSN &&
+	    ((sm->ap_rsnxe && !ie->rsnxe) ||
+	     (!sm->ap_rsnxe && ie->rsnxe) ||
+	     (sm->ap_rsnxe && ie->rsnxe &&
+	      (sm->ap_rsnxe_len != ie->rsnxe_len ||
+	       os_memcmp(sm->ap_rsnxe, ie->rsnxe, sm->ap_rsnxe_len) != 0)))) {
 		wpa_msg(sm->ctx->msg_ctx, MSG_INFO,
 			"WPA: RSNXE mismatch between Beacon/ProbeResp and EAPOL-Key msg 3/4");
 		wpa_hexdump(MSG_INFO, "RSNXE in Beacon/ProbeResp",
@@ -1665,6 +1679,7 @@
 	}
 
 	if (ie.igtk &&
+	    sm->mgmt_group_cipher != WPA_CIPHER_GTK_NOT_USED &&
 	    wpa_cipher_valid_mgmt_group(sm->mgmt_group_cipher) &&
 	    ie.igtk_len != WPA_IGTK_KDE_PREFIX_LEN +
 	    (unsigned int) wpa_cipher_key_len(sm->mgmt_group_cipher)) {
@@ -1836,6 +1851,7 @@
 {
 	int maxkeylen;
 	struct wpa_eapol_ie_parse ie;
+	u16 gtk_len;
 
 	wpa_hexdump_key(MSG_DEBUG, "RSN: msg 1/2 key data",
 			keydata, keydatalen);
@@ -1851,7 +1867,20 @@
 			"WPA: No GTK IE in Group Key msg 1/2");
 		return -1;
 	}
-	maxkeylen = gd->gtk_len = ie.gtk_len - 2;
+	gtk_len = ie.gtk_len;
+	if (gtk_len < 2) {
+		wpa_msg(sm->ctx->msg_ctx, MSG_INFO,
+			"RSN: Invalid GTK KDE length (%u) in Group Key msg 1/2",
+			gtk_len);
+		return -1;
+	}
+	gtk_len -= 2;
+	if (gtk_len > sizeof(gd->gtk)) {
+		wpa_msg(sm->ctx->msg_ctx, MSG_INFO,
+			"RSN: Too long GTK in GTK KDE (len=%u)", gtk_len);
+		return -1;
+	}
+	maxkeylen = gd->gtk_len = gtk_len;
 
 #ifdef CONFIG_OCV
 	if (wpa_sm_ocv_enabled(sm)) {
@@ -1875,22 +1904,16 @@
 #endif /* CONFIG_OCV */
 
 	if (wpa_supplicant_check_group_cipher(sm, sm->group_cipher,
-					      gd->gtk_len, maxkeylen,
+					      gtk_len, maxkeylen,
 					      &gd->key_rsc_len, &gd->alg))
 		return -1;
 
 	wpa_hexdump_key(MSG_DEBUG, "RSN: received GTK in group key handshake",
-			ie.gtk, ie.gtk_len);
+			ie.gtk, 2 + gtk_len);
 	gd->keyidx = ie.gtk[0] & 0x3;
 	gd->tx = wpa_supplicant_gtk_tx_bit_workaround(sm,
 						      !!(ie.gtk[0] & BIT(2)));
-	if (ie.gtk_len - 2 > sizeof(gd->gtk)) {
-		wpa_msg(sm->ctx->msg_ctx, MSG_INFO,
-			"RSN: Too long GTK in GTK IE (len=%lu)",
-			(unsigned long) ie.gtk_len - 2);
-		return -1;
-	}
-	os_memcpy(gd->gtk, ie.gtk + 2, ie.gtk_len - 2);
+	os_memcpy(gd->gtk, ie.gtk + 2, gtk_len);
 
 	if (ieee80211w_set_keys(sm, &ie) < 0)
 		wpa_msg(sm->ctx->msg_ctx, MSG_INFO,
@@ -3174,6 +3197,7 @@
 		sm->p2p = config->p2p;
 		sm->wpa_rsc_relaxation = config->wpa_rsc_relaxation;
 		sm->owe_ptk_workaround = config->owe_ptk_workaround;
+		sm->force_kdk_derivation = config->force_kdk_derivation;
 #ifdef CONFIG_FILS
 		if (config->fils_cache_id) {
 			sm->fils_cache_id_set = 1;
@@ -3196,6 +3220,7 @@
 		sm->wpa_rsc_relaxation = 0;
 		sm->owe_ptk_workaround = 0;
 		sm->beacon_prot = 0;
+		sm->force_kdk_derivation = false;
 	}
 }
 
@@ -3773,6 +3798,16 @@
 }
 
 
+struct rsn_pmksa_cache_entry * wpa_sm_pmksa_cache_get(struct wpa_sm *sm,
+						      const u8 *aa,
+						      const u8 *pmkid,
+						      const void *network_ctx,
+						      int akmp)
+{
+	return pmksa_cache_get(sm->pmksa, aa, pmkid, network_ctx, akmp);
+}
+
+
 void wpa_sm_drop_sa(struct wpa_sm *sm)
 {
 	wpa_dbg(sm->ctx->msg_ctx, MSG_DEBUG, "WPA: Clear old PMK and PTK");
@@ -3793,6 +3828,11 @@
 	sm->pmk_r0_len = 0;
 	os_memset(sm->pmk_r1, 0, sizeof(sm->pmk_r1));
 	sm->pmk_r1_len = 0;
+#ifdef CONFIG_PASN
+	os_free(sm->pasn_r1kh);
+	sm->pasn_r1kh = NULL;
+	sm->n_pasn_r1kh = 0;
+#endif /* CONFIG_PASN */
 #endif /* CONFIG_IEEE80211R */
 }
 
@@ -4117,7 +4157,7 @@
 	const u8 *g_sta = NULL;
 	size_t g_sta_len = 0;
 	const u8 *g_ap = NULL;
-	size_t g_ap_len = 0;
+	size_t g_ap_len = 0, kdk_len;
 	struct wpabuf *pub = NULL;
 
 	os_memcpy(sm->bssid, bssid, ETH_ALEN);
@@ -4345,13 +4385,21 @@
 		goto fail;
 	}
 
+	if (sm->force_kdk_derivation ||
+	    (sm->secure_ltf && sm->ap_rsnxe && sm->ap_rsnxe_len >= 4 &&
+	     sm->ap_rsnxe[3] & BIT(WLAN_RSNX_CAPAB_SECURE_LTF - 8)))
+		kdk_len = WPA_KDK_MAX_LEN;
+	else
+		kdk_len = 0;
+
 	if (fils_pmk_to_ptk(sm->pmk, sm->pmk_len, sm->own_addr, sm->bssid,
 			    sm->fils_nonce, sm->fils_anonce,
 			    dh_ss ? wpabuf_head(dh_ss) : NULL,
 			    dh_ss ? wpabuf_len(dh_ss) : 0,
 			    &sm->ptk, ick, &ick_len,
 			    sm->key_mgmt, sm->pairwise_cipher,
-			    sm->fils_ft, &sm->fils_ft_len) < 0) {
+			    sm->fils_ft, &sm->fils_ft_len,
+			    kdk_len) < 0) {
 		wpa_printf(MSG_DEBUG, "FILS: Failed to derive PTK");
 		goto fail;
 	}
@@ -4906,6 +4954,9 @@
 		goto fail;
 	}
 
+	wpa_sm_store_ptk(sm, sm->bssid, sm->pairwise_cipher,
+			 sm->dot11RSNAConfigPMKLifetime, &sm->ptk);
+
 	/* TODO: TK could be cleared after auth frame exchange now that driver
 	 * takes care of association frame encryption/decryption. */
 	/* TK is not needed anymore in supplicant */
@@ -5178,3 +5229,14 @@
 	}
 }
 #endif /* CONFIG_DPP2 */
+
+
+#ifdef CONFIG_PASN
+void wpa_pasn_pmksa_cache_add(struct wpa_sm *sm, const u8 *pmk, size_t pmk_len,
+			      const u8 *pmkid, const u8 *bssid, int key_mgmt)
+{
+	sm->cur_pmksa = pmksa_cache_add(sm->pmksa, pmk, pmk_len, pmkid, NULL, 0,
+					bssid, sm->own_addr, NULL,
+					key_mgmt, 0);
+}
+#endif /* CONFIG_PASN */
diff --git a/src/rsn_supp/wpa.h b/src/rsn_supp/wpa.h
index 5fc7ed6..541ef5a 100644
--- a/src/rsn_supp/wpa.h
+++ b/src/rsn_supp/wpa.h
@@ -87,6 +87,8 @@
 			    const u8 *pkt, size_t pkt_len);
 	int (*channel_info)(void *ctx, struct wpa_channel_info *ci);
 	void (*transition_disable)(void *ctx, u8 bitmap);
+	void (*store_ptk)(void *ctx, u8 *addr, int cipher,
+			  u32 life_time, const struct wpa_ptk *ptk);
 };
 
 
@@ -130,6 +132,7 @@
 	int owe_ptk_workaround;
 	const u8 *fils_cache_id;
 	int beacon_prot;
+	bool force_kdk_derivation;
 };
 
 #ifndef CONFIG_NO_WPA
@@ -189,6 +192,11 @@
 int wpa_sm_pmksa_exists(struct wpa_sm *sm, const u8 *bssid,
 			const void *network_ctx);
 void wpa_sm_drop_sa(struct wpa_sm *sm);
+struct rsn_pmksa_cache_entry * wpa_sm_pmksa_cache_get(struct wpa_sm *sm,
+						      const u8 *aa,
+						      const u8 *pmkid,
+						      const void *network_ctx,
+						      int akmp);
 int wpa_sm_has_ptk(struct wpa_sm *sm);
 int wpa_sm_has_ptk_installed(struct wpa_sm *sm);
 
@@ -369,6 +377,13 @@
 {
 }
 
+static inline struct rsn_pmksa_cache_entry *
+wpa_sm_pmksa_cache_get(struct wpa_sm *sm, const u8 *aa, const u8 *pmkid,
+		       const void *network_ctx, int akmp)
+{
+	return NULL;
+}
+
 static inline int wpa_sm_has_ptk(struct wpa_sm *sm)
 {
 	return 0;
@@ -420,6 +435,13 @@
 int wpa_ft_start_over_ds(struct wpa_sm *sm, const u8 *target_ap,
 			 const u8 *mdie);
 
+#ifdef CONFIG_PASN
+
+int wpa_pasn_ft_derive_pmk_r1(struct wpa_sm *sm, int akmp, const u8 *r1kh_id,
+			      u8 *pmk_r1, size_t *pmk_r1_len, u8 *pmk_r1_name);
+
+#endif /* CONFIG_PASN */
+
 #else /* CONFIG_IEEE80211R */
 
 static inline int
@@ -467,6 +489,16 @@
 	return -1;
 }
 
+#ifdef CONFIG_PASN
+
+int wpa_pasn_ft_derive_pmk_r1(struct wpa_sm *sm, int akmp, const u8 *r1kh_id,
+			      u8 *pmk_r1, size_t *pmk_r1_len, u8 *pmk_r1_name)
+{
+	return -1;
+}
+
+#endif /* CONFIG_PASN */
+
 #endif /* CONFIG_IEEE80211R */
 
 
@@ -515,5 +547,7 @@
 void wpa_sm_set_reset_fils_completed(struct wpa_sm *sm, int set);
 void wpa_sm_set_fils_cache_id(struct wpa_sm *sm, const u8 *fils_cache_id);
 void wpa_sm_set_dpp_z(struct wpa_sm *sm, const struct wpabuf *z);
+void wpa_pasn_pmksa_cache_add(struct wpa_sm *sm, const u8 *pmk, size_t pmk_len,
+			      const u8 *pmkid, const u8 *bssid, int key_mgmt);
 
 #endif /* WPA_H */
diff --git a/src/rsn_supp/wpa_ft.c b/src/rsn_supp/wpa_ft.c
index d7e3685..c517c41 100644
--- a/src/rsn_supp/wpa_ft.c
+++ b/src/rsn_supp/wpa_ft.c
@@ -24,6 +24,15 @@
 
 #ifdef CONFIG_IEEE80211R
 
+#ifdef CONFIG_PASN
+static void wpa_ft_pasn_store_r1kh(struct wpa_sm *sm, const u8 *bssid);
+#else /* CONFIG_PASN */
+static void wpa_ft_pasn_store_r1kh(struct wpa_sm *sm, const u8 *bssid)
+{
+}
+#endif /* CONFIG_PASN */
+
+
 int wpa_derive_ptk_ft(struct wpa_sm *sm, const unsigned char *src_addr,
 		      const struct wpa_eapol_key *key, struct wpa_ptk *ptk)
 {
@@ -31,7 +40,7 @@
 	const u8 *anonce = key->key_nonce;
 	int use_sha384 = wpa_key_mgmt_sha384(sm->key_mgmt);
 	const u8 *mpmk;
-	size_t mpmk_len;
+	size_t mpmk_len, kdk_len;
 
 	if (sm->xxkey_len > 0) {
 		mpmk = sm->xxkey;
@@ -56,9 +65,20 @@
 			      sm->r1kh_id, sm->own_addr, sm->pmk_r1,
 			      sm->pmk_r1_name) < 0)
 		return -1;
+
+	wpa_ft_pasn_store_r1kh(sm, src_addr);
+
+	if (sm->force_kdk_derivation ||
+	    (sm->secure_ltf && sm->ap_rsnxe && sm->ap_rsnxe_len >= 4 &&
+	     sm->ap_rsnxe[3] & BIT(WLAN_RSNX_CAPAB_SECURE_LTF - 8)))
+		kdk_len = WPA_KDK_MAX_LEN;
+	else
+		kdk_len = 0;
+
 	return wpa_pmk_r1_to_ptk(sm->pmk_r1, sm->pmk_r1_len, sm->snonce, anonce,
 				 sm->own_addr, sm->bssid, sm->pmk_r1_name, ptk,
-				 ptk_name, sm->key_mgmt, sm->pairwise_cipher);
+				 ptk_name, sm->key_mgmt, sm->pairwise_cipher,
+				 kdk_len);
 }
 
 
@@ -448,6 +468,8 @@
 		return -1;
 	}
 
+	wpa_sm_store_ptk(sm, sm->bssid, sm->pairwise_cipher,
+			 sm->dot11RSNAConfigPMKLifetime, &sm->ptk);
 	return 0;
 }
 
@@ -524,7 +546,7 @@
 	int ret;
 	const u8 *bssid;
 	const u8 *kck;
-	size_t kck_len;
+	size_t kck_len, kdk_len;
 	int use_sha384 = wpa_key_mgmt_sha384(sm->key_mgmt);
 	const u8 *anonce, *snonce;
 
@@ -646,10 +668,21 @@
 	sm->pmk_r1_len = sm->pmk_r0_len;
 
 	bssid = target_ap;
+
+	wpa_ft_pasn_store_r1kh(sm, bssid);
+
+	if (sm->force_kdk_derivation ||
+	    (sm->secure_ltf && sm->ap_rsnxe && sm->ap_rsnxe_len >= 4 &&
+	     sm->ap_rsnxe[3] & BIT(WLAN_RSNX_CAPAB_SECURE_LTF - 8)))
+		kdk_len = WPA_KDK_MAX_LEN;
+	else
+		kdk_len = 0;
+
 	if (wpa_pmk_r1_to_ptk(sm->pmk_r1, sm->pmk_r1_len, sm->snonce,
 			      anonce, sm->own_addr, bssid,
 			      sm->pmk_r1_name, &sm->ptk, ptk_name, sm->key_mgmt,
-			      sm->pairwise_cipher) < 0)
+			      sm->pairwise_cipher,
+			      kdk_len) < 0)
 		return -1;
 
 	if (wpa_key_mgmt_fils(sm->key_mgmt)) {
@@ -1244,4 +1277,88 @@
 	return 0;
 }
 
+
+#ifdef CONFIG_PASN
+
+static struct pasn_ft_r1kh * wpa_ft_pasn_get_r1kh(struct wpa_sm *sm,
+						  const u8 *bssid)
+{
+	size_t i;
+
+	for (i = 0; i < sm->n_pasn_r1kh; i++)
+		if (os_memcmp(sm->pasn_r1kh[i].bssid, bssid, ETH_ALEN) == 0)
+			return &sm->pasn_r1kh[i];
+
+	return NULL;
+}
+
+
+static void wpa_ft_pasn_store_r1kh(struct wpa_sm *sm, const u8 *bssid)
+{
+	struct pasn_ft_r1kh *tmp = wpa_ft_pasn_get_r1kh(sm, bssid);
+
+	if (tmp)
+		return;
+
+	tmp = os_realloc_array(sm->pasn_r1kh, sm->n_pasn_r1kh + 1,
+			       sizeof(*tmp));
+	if (!tmp) {
+		wpa_printf(MSG_DEBUG, "PASN: FT: Failed to store R1KH");
+		return;
+	}
+
+	sm->pasn_r1kh = tmp;
+	tmp = &sm->pasn_r1kh[sm->n_pasn_r1kh];
+
+	wpa_printf(MSG_DEBUG, "PASN: FT: Store R1KH for " MACSTR,
+		   MAC2STR(bssid));
+
+	os_memcpy(tmp->bssid, bssid, ETH_ALEN);
+	os_memcpy(tmp->r1kh_id, sm->r1kh_id, FT_R1KH_ID_LEN);
+
+	sm->n_pasn_r1kh++;
+}
+
+
+int wpa_pasn_ft_derive_pmk_r1(struct wpa_sm *sm, int akmp, const u8 *bssid,
+			      u8 *pmk_r1, size_t *pmk_r1_len, u8 *pmk_r1_name)
+{
+	struct pasn_ft_r1kh *r1kh_entry;
+
+	if (sm->key_mgmt != (unsigned int) akmp) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: FT: Key management mismatch: %u != %u",
+			   sm->key_mgmt, akmp);
+		return -1;
+	}
+
+	r1kh_entry = wpa_ft_pasn_get_r1kh(sm, bssid);
+	if (!r1kh_entry) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: FT: Cannot find R1KH-ID for " MACSTR,
+			   MAC2STR(bssid));
+		return -1;
+	}
+
+	/*
+	 * Note: PMK R0 etc. were already derived and are maintained by the
+	 * state machine, and as the same key hierarchy is used, there is no
+	 * need to derive them again, so only derive PMK R1 etc.
+	 */
+	if (wpa_derive_pmk_r1(sm->pmk_r0, sm->pmk_r0_len, sm->pmk_r0_name,
+			      r1kh_entry->r1kh_id, sm->own_addr, pmk_r1,
+			      pmk_r1_name) < 0)
+		return -1;
+
+	*pmk_r1_len = sm->pmk_r0_len;
+
+	wpa_hexdump_key(MSG_DEBUG, "PASN: FT: PMK-R1", pmk_r1, sm->pmk_r0_len);
+	wpa_hexdump(MSG_DEBUG, "PASN: FT: PMKR1Name", pmk_r1_name,
+		    WPA_PMK_NAME_LEN);
+
+	return 0;
+}
+
+#endif /* CONFIG_PASN */
+
 #endif /* CONFIG_IEEE80211R */
diff --git a/src/rsn_supp/wpa_i.h b/src/rsn_supp/wpa_i.h
index 96b07fc..1dc9639 100644
--- a/src/rsn_supp/wpa_i.h
+++ b/src/rsn_supp/wpa_i.h
@@ -14,6 +14,11 @@
 struct wpa_tdls_peer;
 struct wpa_eapol_key;
 
+struct pasn_ft_r1kh {
+	u8 bssid[ETH_ALEN];
+	u8 r1kh_id[FT_R1KH_ID_LEN];
+};
+
 /**
  * struct wpa_sm - Internal WPA state machine data
  */
@@ -73,6 +78,12 @@
 			     * to be used */
 	int keyidx_active; /* Key ID for the active TK */
 
+	/*
+	 * If set Key Derivation Key should be derived as part of PMK to
+	 * PTK derivation regardless of advertised capabilities.
+	 */
+	bool force_kdk_derivation;
+
 	u8 own_addr[ETH_ALEN];
 	const char *ifname;
 	const char *bridge_ifname;
@@ -95,7 +106,11 @@
 	int mfp; /* 0 = disabled, 1 = optional, 2 = mandatory */
 	int ocv; /* Operating Channel Validation */
 	int sae_pwe; /* SAE PWE generation options */
-	int sae_pk; /* whether SAE-PK is used */
+
+	unsigned int sae_pk:1; /* whether SAE-PK is used */
+	unsigned int secure_ltf:1;
+	unsigned int secure_rtt:1;
+	unsigned int prot_range_neg:1;
 
 	u8 *assoc_wpa_ie; /* Own WPA/RSN IE from (Re)AssocReq */
 	size_t assoc_wpa_ie_len;
@@ -146,6 +161,17 @@
 	u8 mdie_ft_capab; /* FT Capability and Policy from target AP MDIE */
 	u8 *assoc_resp_ies; /* MDIE and FTIE from (Re)Association Response */
 	size_t assoc_resp_ies_len;
+#ifdef CONFIG_PASN
+	/*
+	 * Currently, the WPA state machine stores the PMK-R1, PMK-R1-Name and
+	 * R1KH-ID only for the current association. As PMK-R1 is required to
+	 * perform PASN authentication with FT, store the R1KH-ID for previous
+	 * associations, which would later be used to derive the PMK-R1 as part
+	 * of the PASN authentication flow.
+	 */
+	struct pasn_ft_r1kh *pasn_r1kh;
+	unsigned int n_pasn_r1kh;
+#endif /* CONFIG_PASN */
 #endif /* CONFIG_IEEE80211R */
 
 #ifdef CONFIG_P2P
@@ -441,6 +467,14 @@
 		sm->ctx->transition_disable(sm->ctx->ctx, bitmap);
 }
 
+static inline void wpa_sm_store_ptk(struct wpa_sm *sm,
+				    u8 *addr, int cipher,
+				    u32 life_time, struct wpa_ptk *ptk)
+{
+	if (sm->ctx->store_ptk)
+		sm->ctx->store_ptk(sm->ctx->ctx, addr, cipher, life_time,
+				   ptk);
+}
 
 int wpa_eapol_key_send(struct wpa_sm *sm, struct wpa_ptk *ptk,
 		       int ver, const u8 *dest, u16 proto,
diff --git a/src/rsn_supp/wpa_ie.c b/src/rsn_supp/wpa_ie.c
index 20fdd69..3ba722f 100644
--- a/src/rsn_supp/wpa_ie.c
+++ b/src/rsn_supp/wpa_ie.c
@@ -354,25 +354,38 @@
 int wpa_gen_rsnxe(struct wpa_sm *sm, u8 *rsnxe, size_t rsnxe_len)
 {
 	u8 *pos = rsnxe;
+	u16 capab = 0;
+	size_t flen;
 
-	if (!wpa_key_mgmt_sae(sm->key_mgmt))
-		return 0; /* SAE not in use */
-	if (sm->sae_pwe != 1 && sm->sae_pwe != 2 && !sm->sae_pk)
+	if (wpa_key_mgmt_sae(sm->key_mgmt) &&
+	    (sm->sae_pwe == 1 || sm->sae_pwe == 2 || sm->sae_pk)) {
+		capab |= BIT(WLAN_RSNX_CAPAB_SAE_H2E);
+#ifdef CONFIG_SAE_PK
+		if (sm->sae_pk)
+			capab |= BIT(WLAN_RSNX_CAPAB_SAE_PK);
+#endif /* CONFIG_SAE_PK */
+	}
+
+	if (sm->secure_ltf)
+		capab |= BIT(WLAN_RSNX_CAPAB_SECURE_LTF);
+	if (sm->secure_rtt)
+		capab |= BIT(WLAN_RSNX_CAPAB_SECURE_RTT);
+	if (sm->prot_range_neg)
+		capab |= BIT(WLAN_RSNX_CAPAB_PROT_RANGE_NEG);
+
+	flen = (capab & 0xff00) ? 2 : 1;
+	if (!capab)
 		return 0; /* no supported extended RSN capabilities */
-
-	if (rsnxe_len < 3)
+	if (rsnxe_len < 2 + flen)
 		return -1;
+	capab |= flen - 1; /* bit 0-3 = Field length (n - 1) */
 
 	*pos++ = WLAN_EID_RSNX;
-	*pos++ = 1;
-	/* bits 0-3 = 0 since only one octet of Extended RSN Capabilities is
-	 * used for now */
-	*pos = BIT(WLAN_RSNX_CAPAB_SAE_H2E);
-#ifdef CONFIG_SAE_PK
-	if (sm->sae_pk)
-		*pos |= BIT(WLAN_RSNX_CAPAB_SAE_PK);
-#endif /* CONFIG_SAE_PK */
-	pos++;
+	*pos++ = flen;
+	*pos++ = capab & 0x00ff;
+	capab >>= 8;
+	if (capab)
+		*pos++ = capab;
 
 	return pos - rsnxe;
 }
diff --git a/src/tls/rsa.c b/src/tls/rsa.c
index 3525eb9..1b01f58 100644
--- a/src/tls/rsa.c
+++ b/src/tls/rsa.c
@@ -285,7 +285,7 @@
 
 	if (use_private) {
 		/*
-		 * Decrypt (or sign) using Chinese remainer theorem to speed
+		 * Decrypt (or sign) using Chinese remainder theorem to speed
 		 * up calculation. This is equivalent to tmp = tmp^d mod n
 		 * (which would require more CPU to calculate directly).
 		 *
diff --git a/src/utils/Makefile b/src/utils/Makefile
index e8ad997..d995b81 100644
--- a/src/utils/Makefile
+++ b/src/utils/Makefile
@@ -6,6 +6,7 @@
 	base64.o \
 	bitfield.o \
 	common.o \
+	config.o \
 	crc32.o \
 	ip_addr.o \
 	json.o \
diff --git a/src/utils/config.c b/src/utils/config.c
new file mode 100644
index 0000000..22aa221
--- /dev/null
+++ b/src/utils/config.c
@@ -0,0 +1,97 @@
+/*
+ * Configuration parsing
+ * Copyright (c) 2003-2019, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include "includes.h"
+
+#include "utils/config.h"
+#include "common.h"
+
+
+static int newline_terminated(const char *buf, size_t buflen)
+{
+	size_t len = os_strlen(buf);
+	if (len == 0)
+		return 0;
+	if (len == buflen - 1 && buf[buflen - 1] != '\r' &&
+	    buf[len - 1] != '\n')
+		return 0;
+	return 1;
+}
+
+
+static void skip_line_end(FILE *stream)
+{
+	char buf[100];
+	while (fgets(buf, sizeof(buf), stream)) {
+		buf[sizeof(buf) - 1] = '\0';
+		if (newline_terminated(buf, sizeof(buf)))
+			return;
+	}
+}
+
+
+char * wpa_config_get_line(char *s, int size, FILE *stream, int *line,
+			   char **_pos)
+{
+	char *pos, *end, *sstart;
+
+	while (fgets(s, size, stream)) {
+		(*line)++;
+		s[size - 1] = '\0';
+		if (!newline_terminated(s, size)) {
+			/*
+			 * The line was truncated - skip rest of it to avoid
+			 * confusing error messages.
+			 */
+			wpa_printf(MSG_INFO, "Long line in configuration file "
+				   "truncated");
+			skip_line_end(stream);
+		}
+		pos = s;
+
+		/* Skip white space from the beginning of line. */
+		while (*pos == ' ' || *pos == '\t' || *pos == '\r')
+			pos++;
+
+		/* Skip comment lines and empty lines */
+		if (*pos == '#' || *pos == '\n' || *pos == '\0')
+			continue;
+
+		/*
+		 * Remove # comments unless they are within a double quoted
+		 * string.
+		 */
+		sstart = os_strchr(pos, '"');
+		if (sstart)
+			sstart = os_strrchr(sstart + 1, '"');
+		if (!sstart)
+			sstart = pos;
+		end = os_strchr(sstart, '#');
+		if (end)
+			*end-- = '\0';
+		else
+			end = pos + os_strlen(pos) - 1;
+
+		/* Remove trailing white space. */
+		while (end > pos &&
+		       (*end == '\n' || *end == ' ' || *end == '\t' ||
+			*end == '\r'))
+			*end-- = '\0';
+
+		if (*pos == '\0')
+			continue;
+
+		if (_pos)
+			*_pos = pos;
+		return pos;
+	}
+
+	if (_pos)
+		*_pos = NULL;
+	return NULL;
+}
diff --git a/src/utils/config.h b/src/utils/config.h
new file mode 100644
index 0000000..074a88a
--- /dev/null
+++ b/src/utils/config.h
@@ -0,0 +1,29 @@
+/*
+ * Configuration parsing
+ * Copyright (c) 2003-2019, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef UTILS_CONFIG_H
+#define UTILS_CONFIG_H
+
+/**
+ * wpa_config_get_line - Read the next configuration file line
+ * @s: Buffer for the line
+ * @size: The buffer length
+ * @stream: File stream to read from
+ * @line: Pointer to a variable storing the file line number
+ * @_pos: Buffer for the pointer to the beginning of data on the text line or
+ * %NULL if not needed (returned value used instead)
+ * Returns: Pointer to the beginning of data on the text line or %NULL if no
+ * more text lines are available.
+ *
+ * This function reads the next non-empty line from the configuration file and
+ * removes comments. The returned string is guaranteed to be null-terminated.
+ */
+char * wpa_config_get_line(char *s, int size, FILE *stream, int *line,
+			   char **_pos);
+
+#endif /* UTILS_CONFIG_H */
diff --git a/src/utils/ext_password.c b/src/utils/ext_password.c
index 5615bd7..cbf92de 100644
--- a/src/utils/ext_password.c
+++ b/src/utils/ext_password.c
@@ -20,6 +20,9 @@
 #ifdef CONFIG_EXT_PASSWORD_TEST
 	&ext_password_test,
 #endif /* CONFIG_EXT_PASSWORD_TEST */
+#ifdef CONFIG_EXT_PASSWORD_FILE
+	&ext_password_file,
+#endif /* CONFIG_EXT_PASSWORD_FILE */
 	NULL
 };
 
diff --git a/src/utils/ext_password_file.c b/src/utils/ext_password_file.c
new file mode 100644
index 0000000..4bb0095
--- /dev/null
+++ b/src/utils/ext_password_file.c
@@ -0,0 +1,136 @@
+/*
+ * External backend for file-backed passwords
+ * Copyright (c) 2021, Patrick Steinhardt <ps@pks.im>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include "includes.h"
+
+#include "utils/common.h"
+#include "utils/config.h"
+#include "ext_password_i.h"
+
+
+/**
+ * Data structure for the file-backed password backend.
+ */
+struct ext_password_file_data {
+	char *path; /* path of the password file */
+};
+
+
+/**
+ * ext_password_file_init - Initialize file-backed password backend
+ * @params: Parameters passed by the user.
+ * Returns: Pointer to the initialized backend.
+ *
+ * This function initializes a new file-backed password backend. The user is
+ * expected to initialize this backend with the parameters being the path of
+ * the file that contains the passwords.
+ */
+static void * ext_password_file_init(const char *params)
+{
+	struct ext_password_file_data *data;
+
+	if (!params) {
+		wpa_printf(MSG_ERROR, "EXT PW FILE: no path given");
+		return NULL;
+	}
+
+	data = os_zalloc(sizeof(*data));
+	if (!data)
+		return NULL;
+
+	data->path = os_strdup(params);
+	if (!data->path) {
+		os_free(data);
+		return NULL;
+	}
+
+	return data;
+}
+
+
+/**
+ * ext_password_file_deinit - Deinitialize file-backed password backend
+ * @ctx: The file-backed password backend
+ *
+ * This function frees all data associated with the file-backed password
+ * backend.
+ */
+static void ext_password_file_deinit(void *ctx)
+{
+	struct ext_password_file_data *data = ctx;
+
+	str_clear_free(data->path);
+	os_free(data);
+}
+
+/**
+ * ext_password_file_get - Retrieve password from the file-backed password backend
+ * @ctx: The file-backed password backend
+ * @name: Name of the password to retrieve
+ * Returns: Buffer containing the password if one was found or %NULL.
+ *
+ * This function tries to find a password identified by name in the password
+ * file. The password is expected to be stored in `NAME=PASSWORD` format.
+ * Comments and empty lines in the file are ignored. Invalid lines will cause
+ * an error message, but will not cause the function to fail.
+ */
+static struct wpabuf * ext_password_file_get(void *ctx, const char *name)
+{
+	struct ext_password_file_data *data = ctx;
+	struct wpabuf *password = NULL;
+	char buf[512], *pos;
+	int line = 0;
+	FILE *f;
+
+	f = fopen(data->path, "r");
+	if (!f) {
+		wpa_printf(MSG_ERROR,
+			   "EXT PW FILE: could not open file '%s': %s",
+			   data->path, strerror(errno));
+		return NULL;
+	}
+
+	wpa_printf(MSG_DEBUG, "EXT PW FILE: get(%s)", name);
+
+	while (wpa_config_get_line(buf, sizeof(buf), f, &line, &pos)) {
+		char *sep = os_strchr(pos, '=');
+
+		if (!sep) {
+			wpa_printf(MSG_ERROR, "Invalid password line %d.",
+				   line);
+			continue;
+		}
+
+		if (!sep[1]) {
+			wpa_printf(MSG_ERROR, "No password for line %d.", line);
+			continue;
+
+		}
+
+		if (os_strncmp(name, pos, sep - pos) != 0)
+			continue;
+
+		password = wpabuf_alloc_copy(sep + 1, os_strlen(sep + 1));
+		goto done;
+	}
+
+	wpa_printf(MSG_ERROR, "Password for '%s' was not found.", name);
+
+done:
+	forced_memzero(buf, sizeof(buf));
+	fclose(f);
+	return password;
+}
+
+
+const struct ext_password_backend ext_password_file = {
+	.name = "file",
+	.init = ext_password_file_init,
+	.deinit = ext_password_file_deinit,
+	.get = ext_password_file_get,
+};
diff --git a/src/utils/ext_password_i.h b/src/utils/ext_password_i.h
index 948eaf5..872ccd1 100644
--- a/src/utils/ext_password_i.h
+++ b/src/utils/ext_password_i.h
@@ -26,4 +26,8 @@
 extern const struct ext_password_backend ext_password_test;
 #endif /* CONFIG_EXT_PASSWORD_TEST */
 
+#ifdef CONFIG_EXT_PASSWORD_FILE
+extern const struct ext_password_backend ext_password_file;
+#endif /* CONFIG_EXT_PASSWORD_FILE */
+
 #endif /* EXT_PASSWORD_I_H */
diff --git a/src/utils/list.h b/src/utils/list.h
index 5298c26..aa62c08 100644
--- a/src/utils/list.h
+++ b/src/utils/list.h
@@ -76,8 +76,8 @@
 	 dl_list_entry((list)->prev, type, member))
 
 #define dl_list_for_each(item, list, type, member) \
-	for (item = dl_list_first((list), type, member); \
-	     item && item != dl_list_entry((list), type, member); \
+	for (item = dl_list_entry((list)->next, type, member); \
+	     &item->member != (list); \
 	     item = dl_list_entry(item->member.next, type, member))
 
 #define dl_list_for_each_safe(item, n, list, type, member) \
diff --git a/src/utils/os_unix.c b/src/utils/os_unix.c
index ae2f802..a90428f 100644
--- a/src/utils/os_unix.c
+++ b/src/utils/os_unix.c
@@ -41,7 +41,7 @@
 
 struct os_alloc_trace {
 	unsigned int magic;
-	struct dl_list list;
+	struct dl_list list __attribute__((aligned(16)));
 	size_t len;
 	WPA_TRACE_INFO
 } __attribute__((aligned(16)));
diff --git a/src/utils/platform.h b/src/utils/platform.h
index 813987e..b2ad856 100644
--- a/src/utils/platform.h
+++ b/src/utils/platform.h
@@ -1,21 +1,18 @@
+/*
+ * Platform definitions for Radiotap parser
+ * Copyright (c) 2021, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
 #ifndef PLATFORM_H
 #define PLATFORM_H
 
 #include "includes.h"
 #include "common.h"
 
-#define le16_to_cpu		le_to_host16
-#define le32_to_cpu		le_to_host32
-
-#define get_unaligned(p)					\
-({								\
-	struct packed_dummy_struct {				\
-		typeof(*(p)) __val;				\
-	} __attribute__((packed)) *__ptr = (void *) (p);	\
-								\
-	__ptr->__val;						\
-})
-#define get_unaligned_le16(p)	le16_to_cpu(get_unaligned((le16 *)(p)))
-#define get_unaligned_le32(p)	le32_to_cpu(get_unaligned((le32 *)(p)))
+#define get_unaligned_le16(p)	WPA_GET_LE16((void *) (p))
+#define get_unaligned_le32(p)	WPA_GET_LE32((void *) (p))
 
 #endif /* PLATFORM_H */
diff --git a/src/utils/radiotap.c b/src/utils/radiotap.c
index 71996eb..6dfe298 100644
--- a/src/utils/radiotap.c
+++ b/src/utils/radiotap.c
@@ -8,10 +8,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Alternatively, this software may be distributed under the terms of BSD
- * license.
- *
- * See COPYING for more details.
+ * Alternatively, this software may be distributed under the terms of ISC
+ * license, see COPYING for more details.
  */
 #include "platform.h"
 #include "radiotap_iter.h"
@@ -39,6 +37,8 @@
 	[IEEE80211_RADIOTAP_DATA_RETRIES] = { .align = 1, .size = 1, },
 	[IEEE80211_RADIOTAP_MCS] = { .align = 1, .size = 3, },
 	[IEEE80211_RADIOTAP_AMPDU_STATUS] = { .align = 4, .size = 8, },
+	[IEEE80211_RADIOTAP_VHT] = { .align = 2, .size = 12, },
+	[IEEE80211_RADIOTAP_TIMESTAMP] = { .align = 8, .size = 12, },
 	/*
 	 * add more here as they are defined in radiotap.h
 	 */
@@ -111,7 +111,7 @@
 	iterator->_arg = (uint8_t *)radiotap_header + sizeof(*radiotap_header);
 	iterator->_next_ns_data = NULL;
 	iterator->_reset_on_ext = 0;
-	iterator->_next_bitmap = &radiotap_header->it_present;
+	iterator->_next_bitmap = (le32 *) (((u8 *) radiotap_header) + offsetof(struct ieee80211_radiotap_header, it_present));
 	iterator->_next_bitmap++;
 	iterator->_vns = vns;
 	iterator->current_namespace = &radiotap_ns;
@@ -222,7 +222,7 @@
  * present fields.  @this_arg can be changed by the caller (eg,
  * incremented to move inside a compound argument like
  * IEEE80211_RADIOTAP_CHANNEL).  The args pointed to are in
- * little-endian format whatever the endianess of your CPU.
+ * little-endian format whatever the endianness of your CPU.
  *
  * Alignment Gotcha:
  * You must take care when dereferencing iterator.this_arg
diff --git a/src/utils/radiotap.h b/src/utils/radiotap.h
index 460af23..488d5a3 100644
--- a/src/utils/radiotap.h
+++ b/src/utils/radiotap.h
@@ -1,190 +1,51 @@
-/*-
- * Copyright (c) 2003, 2004 David Young.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of David Young may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
- * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL DAVID
- * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- */
-
 /*
- * Modifications to fit into the linux IEEE 802.11 stack,
- * Mike Kershaw (dragorn@kismetwireless.net)
- */
-
-#ifndef IEEE80211RADIOTAP_H
-#define IEEE80211RADIOTAP_H
-
-#include <stdint.h>
-
-/* Base version of the radiotap packet header data */
-#define PKTHDR_RADIOTAP_VERSION		0
-
-/* A generic radio capture format is desirable. There is one for
- * Linux, but it is neither rigidly defined (there were not even
- * units given for some fields) nor easily extensible.
+ * Copyright (c) 2017		Intel Deutschland GmbH
  *
- * I suggest the following extensible radio capture format. It is
- * based on a bitmap indicating which fields are present.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
  *
- * I am trying to describe precisely what the application programmer
- * should expect in the following, and for that reason I tell the
- * units and origin of each measurement (where it applies), or else I
- * use sufficiently weaselly language ("is a monotonically nondecreasing
- * function of...") that I cannot set false expectations for lawyerly
- * readers.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
+#ifndef __RADIOTAP_H
+#define __RADIOTAP_H
 
-/* The radio capture header precedes the 802.11 header.
- * All data in the header is little endian on all platforms.
+/**
+ * struct ieee82011_radiotap_header - base radiotap header
  */
 struct ieee80211_radiotap_header {
-	uint8_t it_version;	/* Version 0. Only increases
-				 * for drastic changes,
-				 * introduction of compatible
-				 * new fields does not count.
-				 */
-	uint8_t it_pad;
-	le16 it_len;		/* length of the whole
-				 * header in bytes, including
-				 * it_version, it_pad,
-				 * it_len, and data fields.
-				 */
-	le32 it_present;	/* A bitmap telling which
-				 * fields are present. Set bit 31
-				 * (0x80000000) to extend the
-				 * bitmap by another 32 bits.
-				 * Additional extensions are made
-				 * by setting bit 31.
-				 */
-};
+	/**
+	 * @it_version: radiotap version, always 0
+	 */
+	uint8_t it_version;
 
-/* Name                                 Data type    Units
- * ----                                 ---------    -----
- *
- * IEEE80211_RADIOTAP_TSFT              __le64       microseconds
- *
- *      Value in microseconds of the MAC's 64-bit 802.11 Time
- *      Synchronization Function timer when the first bit of the
- *      MPDU arrived at the MAC. For received frames, only.
- *
- * IEEE80211_RADIOTAP_CHANNEL           2 x uint16_t   MHz, bitmap
- *
- *      Tx/Rx frequency in MHz, followed by flags (see below).
- *
- * IEEE80211_RADIOTAP_FHSS              uint16_t       see below
- *
- *      For frequency-hopping radios, the hop set (first byte)
- *      and pattern (second byte).
- *
- * IEEE80211_RADIOTAP_RATE              u8           500kb/s
- *
- *      Tx/Rx data rate
- *
- * IEEE80211_RADIOTAP_DBM_ANTSIGNAL     s8           decibels from
- *                                                   one milliwatt (dBm)
- *
- *      RF signal power at the antenna, decibel difference from
- *      one milliwatt.
- *
- * IEEE80211_RADIOTAP_DBM_ANTNOISE      s8           decibels from
- *                                                   one milliwatt (dBm)
- *
- *      RF noise power at the antenna, decibel difference from one
- *      milliwatt.
- *
- * IEEE80211_RADIOTAP_DB_ANTSIGNAL      u8           decibel (dB)
- *
- *      RF signal power at the antenna, decibel difference from an
- *      arbitrary, fixed reference.
- *
- * IEEE80211_RADIOTAP_DB_ANTNOISE       u8           decibel (dB)
- *
- *      RF noise power at the antenna, decibel difference from an
- *      arbitrary, fixed reference point.
- *
- * IEEE80211_RADIOTAP_LOCK_QUALITY      uint16_t       unitless
- *
- *      Quality of Barker code lock. Unitless. Monotonically
- *      nondecreasing with "better" lock strength. Called "Signal
- *      Quality" in datasheets.  (Is there a standard way to measure
- *      this?)
- *
- * IEEE80211_RADIOTAP_TX_ATTENUATION    uint16_t       unitless
- *
- *      Transmit power expressed as unitless distance from max
- *      power set at factory calibration.  0 is max power.
- *      Monotonically nondecreasing with lower power levels.
- *
- * IEEE80211_RADIOTAP_DB_TX_ATTENUATION uint16_t       decibels (dB)
- *
- *      Transmit power expressed as decibel distance from max power
- *      set at factory calibration.  0 is max power.  Monotonically
- *      nondecreasing with lower power levels.
- *
- * IEEE80211_RADIOTAP_DBM_TX_POWER      s8           decibels from
- *                                                   one milliwatt (dBm)
- *
- *      Transmit power expressed as dBm (decibels from a 1 milliwatt
- *      reference). This is the absolute power level measured at
- *      the antenna port.
- *
- * IEEE80211_RADIOTAP_FLAGS             u8           bitmap
- *
- *      Properties of transmitted and received frames. See flags
- *      defined below.
- *
- * IEEE80211_RADIOTAP_ANTENNA           u8           antenna index
- *
- *      Unitless indication of the Rx/Tx antenna for this packet.
- *      The first antenna is antenna 0.
- *
- * IEEE80211_RADIOTAP_RX_FLAGS          uint16_t       bitmap
- *
- *     Properties of received frames. See flags defined below.
- *
- * IEEE80211_RADIOTAP_TX_FLAGS          uint16_t       bitmap
- *
- *     Properties of transmitted frames. See flags defined below.
- *
- * IEEE80211_RADIOTAP_RTS_RETRIES       u8           data
- *
- *     Number of rts retries a transmitted frame used.
- *
- * IEEE80211_RADIOTAP_DATA_RETRIES      u8           data
- *
- *     Number of unicast retries a transmitted frame used.
- *
- * IEEE80211_RADIOTAP_MCS	u8, u8, u8		unitless
- *
- *     Contains a bitmap of known fields/flags, the flags, and
- *     the MCS index.
- *
- * IEEE80211_RADIOTAP_AMPDU_STATUS	u32, u16, u8, u8	unitlesss
- *
- *	Contains the AMPDU information for the subframe.
- */
-enum ieee80211_radiotap_type {
+	/**
+	 * @it_pad: padding (or alignment)
+	 */
+	uint8_t it_pad;
+
+	/**
+	 * @it_len: overall radiotap header length
+	 */
+	le16 it_len;
+
+	/**
+	 * @it_present: (first) present word
+	 */
+	le32 it_present;
+} STRUCT_PACKED;
+
+/* version is always 0 */
+#define PKTHDR_RADIOTAP_VERSION	0
+
+/* see the radiotap website for the descriptions */
+enum ieee80211_radiotap_presence {
 	IEEE80211_RADIOTAP_TSFT = 0,
 	IEEE80211_RADIOTAP_FLAGS = 1,
 	IEEE80211_RADIOTAP_RATE = 2,
@@ -203,9 +64,11 @@
 	IEEE80211_RADIOTAP_TX_FLAGS = 15,
 	IEEE80211_RADIOTAP_RTS_RETRIES = 16,
 	IEEE80211_RADIOTAP_DATA_RETRIES = 17,
-
+	/* 18 is XChannel, but it's not defined yet */
 	IEEE80211_RADIOTAP_MCS = 19,
 	IEEE80211_RADIOTAP_AMPDU_STATUS = 20,
+	IEEE80211_RADIOTAP_VHT = 21,
+	IEEE80211_RADIOTAP_TIMESTAMP = 22,
 
 	/* valid in every it_present bitmap, even vendor namespaces */
 	IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE = 29,
@@ -213,79 +76,125 @@
 	IEEE80211_RADIOTAP_EXT = 31
 };
 
-/* Channel flags. */
-#define	IEEE80211_CHAN_TURBO	0x0010	/* Turbo channel */
-#define	IEEE80211_CHAN_CCK	0x0020	/* CCK channel */
-#define	IEEE80211_CHAN_OFDM	0x0040	/* OFDM channel */
-#define	IEEE80211_CHAN_2GHZ	0x0080	/* 2 GHz spectrum channel. */
-#define	IEEE80211_CHAN_5GHZ	0x0100	/* 5 GHz spectrum channel */
-#define	IEEE80211_CHAN_PASSIVE	0x0200	/* Only passive scan allowed */
-#define	IEEE80211_CHAN_DYN	0x0400	/* Dynamic CCK-OFDM channel */
-#define	IEEE80211_CHAN_GFSK	0x0800	/* GFSK channel (FHSS PHY) */
+/* for IEEE80211_RADIOTAP_FLAGS */
+enum ieee80211_radiotap_flags {
+	IEEE80211_RADIOTAP_F_CFP = 0x01,
+	IEEE80211_RADIOTAP_F_SHORTPRE = 0x02,
+	IEEE80211_RADIOTAP_F_WEP = 0x04,
+	IEEE80211_RADIOTAP_F_FRAG = 0x08,
+	IEEE80211_RADIOTAP_F_FCS = 0x10,
+	IEEE80211_RADIOTAP_F_DATAPAD = 0x20,
+	IEEE80211_RADIOTAP_F_BADFCS = 0x40,
+};
 
-/* For IEEE80211_RADIOTAP_FLAGS */
-#define	IEEE80211_RADIOTAP_F_CFP	0x01	/* sent/received
-						 * during CFP
-						 */
-#define	IEEE80211_RADIOTAP_F_SHORTPRE	0x02	/* sent/received
-						 * with short
-						 * preamble
-						 */
-#define	IEEE80211_RADIOTAP_F_WEP	0x04	/* sent/received
-						 * with WEP encryption
-						 */
-#define	IEEE80211_RADIOTAP_F_FRAG	0x08	/* sent/received
-						 * with fragmentation
-						 */
-#define	IEEE80211_RADIOTAP_F_FCS	0x10	/* frame includes FCS */
-#define	IEEE80211_RADIOTAP_F_DATAPAD	0x20	/* frame has padding between
-						 * 802.11 header and payload
-						 * (to 32-bit boundary)
-						 */
-#define IEEE80211_RADIOTAP_F_BADFCS	0x40	/* frame failed FCS check */
+/* for IEEE80211_RADIOTAP_CHANNEL */
+enum ieee80211_radiotap_channel_flags {
+	IEEE80211_CHAN_CCK = 0x0020,
+	IEEE80211_CHAN_OFDM = 0x0040,
+	IEEE80211_CHAN_2GHZ = 0x0080,
+	IEEE80211_CHAN_5GHZ = 0x0100,
+	IEEE80211_CHAN_DYN = 0x0400,
+	IEEE80211_CHAN_HALF = 0x4000,
+	IEEE80211_CHAN_QUARTER = 0x8000,
+};
 
-/* For IEEE80211_RADIOTAP_RX_FLAGS */
-#define IEEE80211_RADIOTAP_F_RX_BADPLCP	0x0002 /* bad PLCP */
+/* for IEEE80211_RADIOTAP_RX_FLAGS */
+enum ieee80211_radiotap_rx_flags {
+	IEEE80211_RADIOTAP_F_RX_BADPLCP = 0x0002,
+};
 
-/* For IEEE80211_RADIOTAP_TX_FLAGS */
-#define IEEE80211_RADIOTAP_F_TX_FAIL	0x0001	/* failed due to excessive
-						 * retries */
-#define IEEE80211_RADIOTAP_F_TX_CTS	0x0002	/* used cts 'protection' */
-#define IEEE80211_RADIOTAP_F_TX_RTS	0x0004	/* used rts/cts handshake */
-#define IEEE80211_RADIOTAP_F_TX_NOACK	0x0008	/* don't expect an ACK */
+/* for IEEE80211_RADIOTAP_TX_FLAGS */
+enum ieee80211_radiotap_tx_flags {
+	IEEE80211_RADIOTAP_F_TX_FAIL = 0x0001,
+	IEEE80211_RADIOTAP_F_TX_CTS = 0x0002,
+	IEEE80211_RADIOTAP_F_TX_RTS = 0x0004,
+	IEEE80211_RADIOTAP_F_TX_NOACK = 0x0008,
+};
 
-/* For IEEE80211_RADIOTAP_AMPDU_STATUS */
-#define IEEE80211_RADIOTAP_AMPDU_REPORT_ZEROLEN		0x0001
-#define IEEE80211_RADIOTAP_AMPDU_IS_ZEROLEN		0x0002
-#define IEEE80211_RADIOTAP_AMPDU_LAST_KNOWN		0x0004
-#define IEEE80211_RADIOTAP_AMPDU_IS_LAST		0x0008
-#define IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_ERR		0x0010
-#define IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_KNOWN	0x0020
+/* for IEEE80211_RADIOTAP_MCS "have" flags */
+enum ieee80211_radiotap_mcs_have {
+	IEEE80211_RADIOTAP_MCS_HAVE_BW = 0x01,
+	IEEE80211_RADIOTAP_MCS_HAVE_MCS = 0x02,
+	IEEE80211_RADIOTAP_MCS_HAVE_GI = 0x04,
+	IEEE80211_RADIOTAP_MCS_HAVE_FMT = 0x08,
+	IEEE80211_RADIOTAP_MCS_HAVE_FEC = 0x10,
+	IEEE80211_RADIOTAP_MCS_HAVE_STBC = 0x20,
+};
 
-/* For IEEE80211_RADIOTAP_MCS */
-#define IEEE80211_RADIOTAP_MCS_HAVE_BW		0x01
-#define IEEE80211_RADIOTAP_MCS_HAVE_MCS		0x02
-#define IEEE80211_RADIOTAP_MCS_HAVE_GI		0x04
-#define IEEE80211_RADIOTAP_MCS_HAVE_FMT		0x08
-#define IEEE80211_RADIOTAP_MCS_HAVE_FEC		0x10
-#define IEEE80211_RADIOTAP_MCS_HAVE_STBC	0x20
-#define IEEE80211_RADIOTAP_MCS_HAVE_NESS	0x40
-#define IEEE80211_RADIOTAP_MCS_NESS_BIT1	0x80
+enum ieee80211_radiotap_mcs_flags {
+	IEEE80211_RADIOTAP_MCS_BW_MASK = 0x03,
+	IEEE80211_RADIOTAP_MCS_BW_20 = 0,
+	IEEE80211_RADIOTAP_MCS_BW_40 = 1,
+	IEEE80211_RADIOTAP_MCS_BW_20L = 2,
+	IEEE80211_RADIOTAP_MCS_BW_20U = 3,
 
+	IEEE80211_RADIOTAP_MCS_SGI = 0x04,
+	IEEE80211_RADIOTAP_MCS_FMT_GF = 0x08,
+	IEEE80211_RADIOTAP_MCS_FEC_LDPC = 0x10,
+	IEEE80211_RADIOTAP_MCS_STBC_MASK = 0x60,
+	IEEE80211_RADIOTAP_MCS_STBC_1 = 1,
+	IEEE80211_RADIOTAP_MCS_STBC_2 = 2,
+	IEEE80211_RADIOTAP_MCS_STBC_3 = 3,
+	IEEE80211_RADIOTAP_MCS_STBC_SHIFT = 5,
+};
 
-#define IEEE80211_RADIOTAP_MCS_BW_MASK		0x03
-#define		IEEE80211_RADIOTAP_MCS_BW_20	0
-#define		IEEE80211_RADIOTAP_MCS_BW_40	1
-#define		IEEE80211_RADIOTAP_MCS_BW_20L	2
-#define		IEEE80211_RADIOTAP_MCS_BW_20U	3
-#define IEEE80211_RADIOTAP_MCS_SGI		0x04
-#define IEEE80211_RADIOTAP_MCS_FMT_GF		0x08
-#define IEEE80211_RADIOTAP_MCS_FEC_LDPC		0x10
-#define IEEE80211_RADIOTAP_MCS_STBC_MASK	0x60
-#define IEEE80211_RADIOTAP_MCS_STBC_SHIFT	5
-#define		IEEE80211_RADIOTAP_MCS_STBC_1	1
-#define		IEEE80211_RADIOTAP_MCS_STBC_2	2
-#define		IEEE80211_RADIOTAP_MCS_STBC_3	3
-#define IEEE80211_RADIOTAP_MCS_NESS_BIT0	0x80
+/* for IEEE80211_RADIOTAP_AMPDU_STATUS */
+enum ieee80211_radiotap_ampdu_flags {
+	IEEE80211_RADIOTAP_AMPDU_REPORT_ZEROLEN = 0x0001,
+	IEEE80211_RADIOTAP_AMPDU_IS_ZEROLEN = 0x0002,
+	IEEE80211_RADIOTAP_AMPDU_LAST_KNOWN = 0x0004,
+	IEEE80211_RADIOTAP_AMPDU_IS_LAST = 0x0008,
+	IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_ERR = 0x0010,
+	IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_KNOWN = 0x0020,
+};
 
-#endif				/* IEEE80211_RADIOTAP_H */
+/* for IEEE80211_RADIOTAP_VHT */
+enum ieee80211_radiotap_vht_known {
+	IEEE80211_RADIOTAP_VHT_KNOWN_STBC = 0x0001,
+	IEEE80211_RADIOTAP_VHT_KNOWN_TXOP_PS_NA = 0x0002,
+	IEEE80211_RADIOTAP_VHT_KNOWN_GI = 0x0004,
+	IEEE80211_RADIOTAP_VHT_KNOWN_SGI_NSYM_DIS = 0x0008,
+	IEEE80211_RADIOTAP_VHT_KNOWN_LDPC_EXTRA_OFDM_SYM = 0x0010,
+	IEEE80211_RADIOTAP_VHT_KNOWN_BEAMFORMED = 0x0020,
+	IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH = 0x0040,
+	IEEE80211_RADIOTAP_VHT_KNOWN_GROUP_ID = 0x0080,
+	IEEE80211_RADIOTAP_VHT_KNOWN_PARTIAL_AID = 0x0100,
+};
+
+enum ieee80211_radiotap_vht_flags {
+	IEEE80211_RADIOTAP_VHT_FLAG_STBC = 0x01,
+	IEEE80211_RADIOTAP_VHT_FLAG_TXOP_PS_NA = 0x02,
+	IEEE80211_RADIOTAP_VHT_FLAG_SGI = 0x04,
+	IEEE80211_RADIOTAP_VHT_FLAG_SGI_NSYM_M10_9 = 0x08,
+	IEEE80211_RADIOTAP_VHT_FLAG_LDPC_EXTRA_OFDM_SYM = 0x10,
+	IEEE80211_RADIOTAP_VHT_FLAG_BEAMFORMED = 0x20,
+};
+
+enum ieee80211_radiotap_vht_coding {
+	IEEE80211_RADIOTAP_CODING_LDPC_USER0 = 0x01,
+	IEEE80211_RADIOTAP_CODING_LDPC_USER1 = 0x02,
+	IEEE80211_RADIOTAP_CODING_LDPC_USER2 = 0x04,
+	IEEE80211_RADIOTAP_CODING_LDPC_USER3 = 0x08,
+};
+
+/* for IEEE80211_RADIOTAP_TIMESTAMP */
+enum ieee80211_radiotap_timestamp_unit_spos {
+	IEEE80211_RADIOTAP_TIMESTAMP_UNIT_MASK = 0x000F,
+	IEEE80211_RADIOTAP_TIMESTAMP_UNIT_MS = 0x0000,
+	IEEE80211_RADIOTAP_TIMESTAMP_UNIT_US = 0x0001,
+	IEEE80211_RADIOTAP_TIMESTAMP_UNIT_NS = 0x0003,
+	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_MASK = 0x00F0,
+	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_BEGIN_MDPU = 0x0000,
+	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_PLCP_SIG_ACQ = 0x0010,
+	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_PPDU = 0x0020,
+	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_MPDU = 0x0030,
+	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_UNKNOWN = 0x00F0,
+};
+
+enum ieee80211_radiotap_timestamp_flags {
+	IEEE80211_RADIOTAP_TIMESTAMP_FLAG_64BIT = 0x00,
+	IEEE80211_RADIOTAP_TIMESTAMP_FLAG_32BIT = 0x01,
+	IEEE80211_RADIOTAP_TIMESTAMP_FLAG_ACCURACY = 0x02,
+};
+
+#endif /* __RADIOTAP_H */
diff --git a/src/wps/wps.h b/src/wps/wps.h
index 93888b0..6a12255 100644
--- a/src/wps/wps.h
+++ b/src/wps/wps.h
@@ -873,6 +873,11 @@
 					 const u8 *oob_dev_pw,
 					 size_t oob_dev_pw_len);
 void wps_registrar_flush(struct wps_registrar *reg);
+int wps_registrar_update_multi_ap(struct wps_registrar *reg,
+				  const u8 *multi_ap_backhaul_ssid,
+				  size_t multi_ap_backhaul_ssid_len,
+				  const u8 *multi_ap_backhaul_network_key,
+				  size_t multi_ap_backhaul_network_key_len);
 
 int wps_build_credential_wrap(struct wpabuf *msg,
 			      const struct wps_credential *cred);
diff --git a/src/wps/wps_registrar.c b/src/wps/wps_registrar.c
index 9e1ee36..0db9367 100644
--- a/src/wps/wps_registrar.c
+++ b/src/wps/wps_registrar.c
@@ -3669,6 +3669,35 @@
 }
 
 
+int wps_registrar_update_multi_ap(struct wps_registrar *reg,
+				  const u8 *multi_ap_backhaul_ssid,
+				  size_t multi_ap_backhaul_ssid_len,
+				  const u8 *multi_ap_backhaul_network_key,
+				  size_t multi_ap_backhaul_network_key_len)
+{
+	if (multi_ap_backhaul_ssid) {
+		os_memcpy(reg->multi_ap_backhaul_ssid,
+			  multi_ap_backhaul_ssid, multi_ap_backhaul_ssid_len);
+		reg->multi_ap_backhaul_ssid_len = multi_ap_backhaul_ssid_len;
+	}
+
+	os_free(reg->multi_ap_backhaul_network_key);
+	reg->multi_ap_backhaul_network_key = NULL;
+	reg->multi_ap_backhaul_network_key_len = 0;
+	if (multi_ap_backhaul_network_key) {
+		reg->multi_ap_backhaul_network_key =
+			os_memdup(multi_ap_backhaul_network_key,
+				  multi_ap_backhaul_network_key_len);
+		if (!reg->multi_ap_backhaul_network_key)
+			return -1;
+		reg->multi_ap_backhaul_network_key_len =
+			multi_ap_backhaul_network_key_len;
+	}
+
+	return 0;
+}
+
+
 #ifdef CONFIG_WPS_NFC
 
 int wps_registrar_add_nfc_pw_token(struct wps_registrar *reg,
diff --git a/wpa_supplicant/Android.mk b/wpa_supplicant/Android.mk
index 2a171f6..553302c 100644
--- a/wpa_supplicant/Android.mk
+++ b/wpa_supplicant/Android.mk
@@ -60,6 +60,10 @@
 L_CFLAGS += -DANDROID_LIB_STUB
 endif
 
+ifneq ($(BOARD_WPA_SUPPLICANT_PRIVATE_LIB_EVENT),)
+L_CFLAGS += -DANDROID_LIB_EVENT
+endif
+
 # Disable roaming in wpa_supplicant
 ifdef CONFIG_NO_ROAMING
 L_CFLAGS += -DCONFIG_NO_ROAMING
@@ -121,6 +125,7 @@
 OBJS += bss.c
 OBJS += eap_register.c
 OBJS += src/utils/common.c
+OBJS += src/utils/config.c
 OBJS += src/utils/wpa_debug.c
 OBJS += src/utils/wpabuf.c
 OBJS += src/utils/bitfield.c
@@ -402,6 +407,17 @@
 OBJS += wifi_display.c
 endif
 
+ifdef CONFIG_PASN
+L_CFLAGS += -DCONFIG_PASN
+L_CFLAGS += -DCONFIG_PTKSA_CACHE
+NEED_HMAC_SHA256_KDF=y
+NEED_HMAC_SHA384_KDF=y
+NEED_SHA256=y
+NEED_SHA384=y
+OBJS += src/common/ptksa_cache.c
+OBJS += pasn_supplicant.c
+endif
+
 ifdef CONFIG_HS20
 OBJS += hs20_supplicant.c
 L_CFLAGS += -DCONFIG_HS20
@@ -1638,6 +1654,12 @@
 NEED_EXT_PASSWORD=y
 endif
 
+ifdef CONFIG_EXT_PASSWORD_FILE
+OBJS += src/utils/ext_password_file.c
+L_CFLAGS += -DCONFIG_EXT_PASSWORD_FILE
+NEED_EXT_PASSWORD=y
+endif
+
 ifdef NEED_EXT_PASSWORD
 OBJS += src/utils/ext_password.c
 L_CFLAGS += -DCONFIG_EXT_PASSWORD
@@ -1668,7 +1690,7 @@
 
 OBJS += src/drivers/driver_common.c
 
-OBJS += wpa_supplicant.c events.c blacklist.c wpas_glue.c scan.c
+OBJS += wpa_supplicant.c events.c bssid_ignore.c wpas_glue.c scan.c
 OBJS_t := $(OBJS) $(OBJS_l2) eapol_test.c
 OBJS_t += src/radius/radius_client.c
 OBJS_t += src/radius/radius.c
diff --git a/wpa_supplicant/ChangeLog b/wpa_supplicant/ChangeLog
index f82e5e0..a06a93b 100644
--- a/wpa_supplicant/ChangeLog
+++ b/wpa_supplicant/ChangeLog
@@ -533,7 +533,7 @@
 	* fixed MSCHAP UTF-8 to UCS-2 conversion for three-byte encoding;
 	  this fixes password with include UTF-8 characters that use
 	  three-byte encoding EAP methods that use NtPasswordHash
-	* fixed couple of sequencies where radio work items could get stuck,
+	* fixed couple of sequences where radio work items could get stuck,
 	  e.g., when rfkill blocking happens during scanning or when
 	  scan-for-auth workaround is used
 	* P2P enhancements/fixes
@@ -627,7 +627,7 @@
 	* added 'dup_network <id_s> <id_d> <name>' command; this can be used to
 	  clone the psk field without having toextract it from wpa_supplicant
 	* fixed GSM authentication on USIM
-	* added support for usin epoll in eloop (CONFIG_ELOOP_EPOLL=y)
+	* added support for using epoll in eloop (CONFIG_ELOOP_EPOLL=y)
 	* fixed some concurrent virtual interface cases with dedicated P2P
 	  management interface to not catch events from removed interface (this
 	  could result in the management interface getting disabled)
@@ -1113,7 +1113,7 @@
 	    workarounds.
 	  - Add support for AuthorizedMACs attribute.
 	* TDLS:
-	  - Propogate TDLS related nl80211 capability flags from kernel and
+	  - Propagate TDLS related nl80211 capability flags from kernel and
 	    add them as driver capability flags. If the driver doesn't support
 	    capabilities, assume TDLS is supported internally. When TDLS is
 	    explicitly not supported, disable all user facing TDLS operations.
@@ -2221,7 +2221,7 @@
 	* added support for EAP-SIM pseudonyms and fast re-authentication
 	* added support for EAP-TLS/PEAP/TTLS fast re-authentication (TLS
 	  session resumption)
-	* added support for EAP-SIM with two challanges
+	* added support for EAP-SIM with two challenges
 	  (phase1="sim_min_num_chal=3" can be used to require three challenges)
 	* added support for configuring DH/DSA parameters for an ephemeral DH
 	  key exchange (EAP-TLS/PEAP/TTLS) using new configuration parameters
@@ -2332,7 +2332,7 @@
 	  ctrl_interface_group can be used to select which group gets access to
 	  the control interface;
 	  wpa_cli: by default, try to connect to the first interface available
-	  in /var/run/wpa_supplicant; this path can be overriden with -p option
+	  in /var/run/wpa_supplicant; this path can be overridden with -p option
 	  and an interface can be selected with -i option (i.e., in most common
 	  cases, wpa_cli does not need to get any arguments)
 	* added support for LEAP
diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile
index 08522de..87db2cd 100644
--- a/wpa_supplicant/Makefile
+++ b/wpa_supplicant/Makefile
@@ -83,6 +83,7 @@
 OBJS += bss.o
 OBJS += eap_register.o
 OBJS += ../src/utils/common.o
+OBJS += ../src/utils/config.o
 OBJS += ../src/utils/wpa_debug.o
 OBJS += ../src/utils/wpabuf.o
 OBJS += ../src/utils/bitfield.o
@@ -394,6 +395,17 @@
 OBJS += wifi_display.o
 endif
 
+ifdef CONFIG_PASN
+CFLAGS += -DCONFIG_PASN
+CFLAGS += -DCONFIG_PTKSA_CACHE
+NEED_HMAC_SHA256_KDF=y
+NEED_HMAC_SHA384_KDF=y
+NEED_SHA256=y
+NEED_SHA384=y
+OBJS += ../src/common/ptksa_cache.o
+OBJS += pasn_supplicant.o
+endif
+
 ifdef CONFIG_HS20
 OBJS += hs20_supplicant.o
 CFLAGS += -DCONFIG_HS20
@@ -1743,6 +1755,12 @@
 NEED_EXT_PASSWORD=y
 endif
 
+ifdef CONFIG_EXT_PASSWORD_FILE
+OBJS += ../src/utils/ext_password_file.o
+CFLAGS += -DCONFIG_EXT_PASSWORD_FILE
+NEED_EXT_PASSWORD=y
+endif
+
 ifdef NEED_EXT_PASSWORD
 OBJS += ../src/utils/ext_password.o
 CFLAGS += -DCONFIG_EXT_PASSWORD
@@ -1785,7 +1803,7 @@
 OBJS += ../src/drivers/driver_common.o
 OBJS_priv += ../src/drivers/driver_common.o
 
-OBJS += wpa_supplicant.o events.o blacklist.o wpas_glue.o scan.o
+OBJS += wpa_supplicant.o events.o bssid_ignore.o wpas_glue.o scan.o
 OBJS_t := $(OBJS) $(OBJS_l2) eapol_test.o
 OBJS_t += ../src/radius/radius_client.o
 OBJS_t += ../src/radius/radius.o
diff --git a/wpa_supplicant/README b/wpa_supplicant/README
index bbc86b1..391912e 100644
--- a/wpa_supplicant/README
+++ b/wpa_supplicant/README
@@ -383,7 +383,7 @@
 You will need to make a configuration file, e.g.,
 /etc/wpa_supplicant.conf, with network configuration for the networks
 you are going to use. Configuration file section below includes
-explanation fo the configuration file format and includes various
+explanation of the configuration file format and includes various
 examples. Once the configuration is ready, you can test whether the
 configuration work by first running wpa_supplicant with following
 command to start it on foreground with debugging enabled:
@@ -778,7 +778,7 @@
   disconnect = disconnect and wait for reassociate command before connecting
   scan = request new BSS scan
   scan_results = get latest scan results
-  get_capability <eap/pairwise/group/key_mgmt/proto/auth_alg> = get capabilies
+  get_capability <eap/pairwise/group/key_mgmt/proto/auth_alg> = get capabilities
   terminate = terminate wpa_supplicant
   quit = exit wpa_cli
 
diff --git a/wpa_supplicant/README-HS20 b/wpa_supplicant/README-HS20
index 3342871..484e4cb 100644
--- a/wpa_supplicant/README-HS20
+++ b/wpa_supplicant/README-HS20
@@ -78,7 +78,7 @@
 
 # Parameters for controlling scanning
 
-# Homogenous ESS identifier
+# Homogeneous ESS identifier
 # If this is set, scans will be used to request response only from BSSes
 # belonging to the specified Homogeneous ESS. This is used only if interworking
 # is enabled.
diff --git a/wpa_supplicant/ap.c b/wpa_supplicant/ap.c
index ac88a7d..cfefa48 100644
--- a/wpa_supplicant/ap.c
+++ b/wpa_supplicant/ap.c
@@ -44,6 +44,7 @@
 #endif /* CONFIG_WPS */
 
 
+#ifdef CONFIG_P2P
 static bool is_chanwidth160_supported(struct hostapd_hw_modes *mode,
 				      struct hostapd_config *conf)
 {
@@ -63,6 +64,7 @@
 		return true;
 	return false;
 }
+#endif /* CONFIG_P2P */
 
 
 static void wpas_conf_ap_vht(struct wpa_supplicant *wpa_s,
@@ -264,6 +266,16 @@
 				wpa_printf(MSG_DEBUG,
 					   "HT secondary channel offset %d for P2P group",
 					   conf->secondary_channel);
+			} else if (ssid->p2p_group && conf->secondary_channel &&
+				   conf->hw_mode != HOSTAPD_MODE_IEEE80211A) {
+				/* This ended up trying to configure invalid
+				 * 2.4 GHz channels (e.g., HT40+ on channel 11)
+				 * in some cases, so clear the secondary channel
+				 * configuration now to avoid such cases that
+				 * would lead to group formation failures. */
+				wpa_printf(MSG_DEBUG,
+					   "Disable HT secondary channel for P2P group on 2.4 GHz");
+				conf->secondary_channel = 0;
 			}
 #endif /* CONFIG_P2P */
 
diff --git a/wpa_supplicant/blacklist.c b/wpa_supplicant/blacklist.c
deleted file mode 100644
index 2f32644..0000000
--- a/wpa_supplicant/blacklist.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * wpa_supplicant - Temporary BSSID blacklist
- * Copyright (c) 2003-2007, Jouni Malinen <j@w1.fi>
- *
- * This software may be distributed under the terms of the BSD license.
- * See README for more details.
- */
-
-#include "includes.h"
-
-#include "common.h"
-#include "wpa_supplicant_i.h"
-#include "blacklist.h"
-
-/**
- * wpa_blacklist_get - Get the blacklist entry for a BSSID
- * @wpa_s: Pointer to wpa_supplicant data
- * @bssid: BSSID
- * Returns: Matching blacklist entry for the BSSID or %NULL if not found
- */
-struct wpa_blacklist * wpa_blacklist_get(struct wpa_supplicant *wpa_s,
-					 const u8 *bssid)
-{
-	struct wpa_blacklist *e;
-
-	if (wpa_s == NULL || bssid == NULL)
-		return NULL;
-
-	if (wpa_s->current_ssid &&
-	    wpa_s->current_ssid->was_recently_reconfigured) {
-		wpa_blacklist_clear(wpa_s);
-		wpa_s->current_ssid->was_recently_reconfigured = false;
-		return NULL;
-	}
-
-	wpa_blacklist_update(wpa_s);
-
-	e = wpa_s->blacklist;
-	while (e) {
-		if (os_memcmp(e->bssid, bssid, ETH_ALEN) == 0)
-			return e;
-		e = e->next;
-	}
-
-	return NULL;
-}
-
-
-/**
- * wpa_blacklist_add - Add an BSSID to the blacklist
- * @wpa_s: Pointer to wpa_supplicant data
- * @bssid: BSSID to be added to the blacklist
- * Returns: Current blacklist count on success, -1 on failure
- *
- * This function adds the specified BSSID to the blacklist or increases the
- * blacklist count if the BSSID was already listed. It should be called when
- * an association attempt fails either due to the selected BSS rejecting
- * association or due to timeout.
- *
- * This blacklist is used to force %wpa_supplicant to go through all available
- * BSSes before retrying to associate with an BSS that rejected or timed out
- * association. It does not prevent the listed BSS from being used; it only
- * changes the order in which they are tried.
- */
-int wpa_blacklist_add(struct wpa_supplicant *wpa_s, const u8 *bssid)
-{
-	struct wpa_blacklist *e;
-	struct os_reltime now;
-
-	if (wpa_s == NULL || bssid == NULL)
-		return -1;
-
-	e = wpa_blacklist_get(wpa_s, bssid);
-	os_get_reltime(&now);
-	if (e) {
-		e->blacklist_start = now;
-		e->count++;
-		if (e->count > 5)
-			e->timeout_secs = 1800;
-		else if (e->count == 5)
-			e->timeout_secs = 600;
-		else if (e->count == 4)
-			e->timeout_secs = 120;
-		else if (e->count == 3)
-			e->timeout_secs = 60;
-		else
-			e->timeout_secs = 10;
-		wpa_printf(MSG_INFO, "BSSID " MACSTR
-			   " blacklist count incremented to %d, blacklisting for %d seconds",
-			   MAC2STR(bssid), e->count, e->timeout_secs);
-		return e->count;
-	}
-
-	e = os_zalloc(sizeof(*e));
-	if (e == NULL)
-		return -1;
-	os_memcpy(e->bssid, bssid, ETH_ALEN);
-	e->count = 1;
-	e->timeout_secs = 10;
-	e->blacklist_start = now;
-	e->next = wpa_s->blacklist;
-	wpa_s->blacklist = e;
-	wpa_printf(MSG_DEBUG, "Added BSSID " MACSTR
-		   " into blacklist, blacklisting for %d seconds",
-		   MAC2STR(bssid), e->timeout_secs);
-
-	return e->count;
-}
-
-
-/**
- * wpa_blacklist_del - Remove an BSSID from the blacklist
- * @wpa_s: Pointer to wpa_supplicant data
- * @bssid: BSSID to be removed from the blacklist
- * Returns: 0 on success, -1 on failure
- */
-int wpa_blacklist_del(struct wpa_supplicant *wpa_s, const u8 *bssid)
-{
-	struct wpa_blacklist *e, *prev = NULL;
-
-	if (wpa_s == NULL || bssid == NULL)
-		return -1;
-
-	e = wpa_s->blacklist;
-	while (e) {
-		if (os_memcmp(e->bssid, bssid, ETH_ALEN) == 0) {
-			if (prev == NULL) {
-				wpa_s->blacklist = e->next;
-			} else {
-				prev->next = e->next;
-			}
-			wpa_printf(MSG_DEBUG, "Removed BSSID " MACSTR " from "
-				   "blacklist", MAC2STR(bssid));
-			os_free(e);
-			return 0;
-		}
-		prev = e;
-		e = e->next;
-	}
-	return -1;
-}
-
-
-/**
- * wpa_blacklist_is_blacklisted - Check the blacklist status of a BSS
- * @wpa_s: Pointer to wpa_supplicant data
- * @bssid: BSSID to be checked
- * Returns: count if BSS is currently considered to be blacklisted, 0 otherwise
- */
-int wpa_blacklist_is_blacklisted(struct wpa_supplicant *wpa_s, const u8 *bssid)
-{
-	struct wpa_blacklist *e;
-	struct os_reltime now;
-
-	e = wpa_blacklist_get(wpa_s, bssid);
-	if (!e)
-		return 0;
-	os_get_reltime(&now);
-	if (os_reltime_expired(&now, &e->blacklist_start, e->timeout_secs))
-		return 0;
-	return e->count;
-}
-
-
-/**
- * wpa_blacklist_clear - Clear the blacklist of all entries
- * @wpa_s: Pointer to wpa_supplicant data
- */
-void wpa_blacklist_clear(struct wpa_supplicant *wpa_s)
-{
-	struct wpa_blacklist *e, *prev;
-
-	e = wpa_s->blacklist;
-	wpa_s->blacklist = NULL;
-	while (e) {
-		prev = e;
-		e = e->next;
-		wpa_printf(MSG_DEBUG, "Removed BSSID " MACSTR " from "
-			   "blacklist (clear)", MAC2STR(prev->bssid));
-		os_free(prev);
-	}
-}
-
-
-/**
- * wpa_blacklist_update - Update the entries in the blacklist,
- * deleting entries that have been expired for over an hour.
- * @wpa_s: Pointer to wpa_supplicant data
- */
-void wpa_blacklist_update(struct wpa_supplicant *wpa_s)
-{
-	struct wpa_blacklist *e, *prev = NULL;
-	struct os_reltime now;
-
-	if (!wpa_s)
-		return;
-
-	e = wpa_s->blacklist;
-	os_get_reltime(&now);
-	while (e) {
-		if (os_reltime_expired(&now, &e->blacklist_start,
-				       e->timeout_secs + 3600)) {
-			struct wpa_blacklist *to_delete = e;
-
-			if (prev) {
-				prev->next = e->next;
-				e = prev->next;
-			} else {
-				wpa_s->blacklist = e->next;
-				e = wpa_s->blacklist;
-			}
-			wpa_printf(MSG_INFO, "Removed BSSID " MACSTR
-				   " from blacklist (expired)",
-				   MAC2STR(to_delete->bssid));
-			os_free(to_delete);
-		} else {
-			prev = e;
-			e = e->next;
-		}
-	}
-}
diff --git a/wpa_supplicant/blacklist.h b/wpa_supplicant/blacklist.h
deleted file mode 100644
index a1c60d5..0000000
--- a/wpa_supplicant/blacklist.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * wpa_supplicant - Temporary BSSID blacklist
- * Copyright (c) 2003-2007, Jouni Malinen <j@w1.fi>
- *
- * This software may be distributed under the terms of the BSD license.
- * See README for more details.
- */
-
-#ifndef BLACKLIST_H
-#define BLACKLIST_H
-
-struct wpa_blacklist {
-	struct wpa_blacklist *next;
-	u8 bssid[ETH_ALEN];
-	int count;
-	/* Time of most recent blacklist event. */
-	struct os_reltime blacklist_start;
-	/*
-	 * Number of seconds after blacklist_start that the entry will be
-	 * considered blacklisted.
-	 */
-	int timeout_secs;
-};
-
-struct wpa_blacklist * wpa_blacklist_get(struct wpa_supplicant *wpa_s,
-					 const u8 *bssid);
-int wpa_blacklist_add(struct wpa_supplicant *wpa_s, const u8 *bssid);
-int wpa_blacklist_del(struct wpa_supplicant *wpa_s, const u8 *bssid);
-int wpa_blacklist_is_blacklisted(struct wpa_supplicant *wpa_s, const u8 *bssid);
-void wpa_blacklist_clear(struct wpa_supplicant *wpa_s);
-void wpa_blacklist_update(struct wpa_supplicant *wpa_s);
-
-#endif /* BLACKLIST_H */
diff --git a/wpa_supplicant/bss.c b/wpa_supplicant/bss.c
index 127f43e..e13783c 100644
--- a/wpa_supplicant/bss.c
+++ b/wpa_supplicant/bss.c
@@ -19,18 +19,6 @@
 #include "scan.h"
 #include "bss.h"
 
-
-#define WPA_BSS_FREQ_CHANGED_FLAG	BIT(0)
-#define WPA_BSS_SIGNAL_CHANGED_FLAG	BIT(1)
-#define WPA_BSS_PRIVACY_CHANGED_FLAG	BIT(2)
-#define WPA_BSS_MODE_CHANGED_FLAG	BIT(3)
-#define WPA_BSS_WPAIE_CHANGED_FLAG	BIT(4)
-#define WPA_BSS_RSNIE_CHANGED_FLAG	BIT(5)
-#define WPA_BSS_WPS_CHANGED_FLAG	BIT(6)
-#define WPA_BSS_RATES_CHANGED_FLAG	BIT(7)
-#define WPA_BSS_IES_CHANGED_FLAG	BIT(8)
-
-
 static void wpa_bss_set_hessid(struct wpa_bss *bss)
 {
 #ifdef CONFIG_INTERWORKING
@@ -351,10 +339,31 @@
 }
 
 
+static bool is_p2p_pending_bss(struct wpa_supplicant *wpa_s,
+			       struct wpa_bss *bss)
+{
+#ifdef CONFIG_P2P
+	u8 addr[ETH_ALEN];
+
+	if (os_memcmp(bss->bssid, wpa_s->pending_join_iface_addr,
+		      ETH_ALEN) == 0)
+		return true;
+	if (!is_zero_ether_addr(wpa_s->pending_join_dev_addr) &&
+	    p2p_parse_dev_addr(wpa_bss_ie_ptr(bss), bss->ie_len, addr) == 0 &&
+	    os_memcmp(addr, wpa_s->pending_join_dev_addr, ETH_ALEN) == 0)
+		return true;
+#endif /* CONFIG_P2P */
+	return false;
+}
+
+
 static int wpa_bss_known(struct wpa_supplicant *wpa_s, struct wpa_bss *bss)
 {
 	struct wpa_ssid *ssid;
 
+	if (is_p2p_pending_bss(wpa_s, bss))
+		return 1;
+
 	for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
 		if (ssid->ssid == NULL || ssid->ssid_len == 0)
 			continue;
@@ -443,7 +452,7 @@
 	bss->ssid_len = ssid_len;
 	bss->ie_len = res->ie_len;
 	bss->beacon_ie_len = res->beacon_ie_len;
-	os_memcpy(bss + 1, res + 1, res->ie_len + res->beacon_ie_len);
+	os_memcpy(bss->ies, res + 1, res->ie_len + res->beacon_ie_len);
 	wpa_bss_set_hessid(bss);
 
 	if (wpa_s->num_bss + 1 > wpa_s->conf->bss_max_count &&
@@ -546,7 +555,7 @@
 		changes |= WPA_BSS_MODE_CHANGED_FLAG;
 
 	if (old->ie_len == new_res->ie_len &&
-	    os_memcmp(old + 1, new_res + 1, old->ie_len) == 0)
+	    os_memcmp(wpa_bss_ie_ptr(old), new_res + 1, old->ie_len) == 0)
 		return changes;
 	changes |= WPA_BSS_IES_CHANGED_FLAG;
 
@@ -567,8 +576,8 @@
 }
 
 
-static void notify_bss_changes(struct wpa_supplicant *wpa_s, u32 changes,
-			       const struct wpa_bss *bss)
+void notify_bss_changes(struct wpa_supplicant *wpa_s, u32 changes,
+			const struct wpa_bss *bss)
 {
 	if (changes & WPA_BSS_FREQ_CHANGED_FLAG)
 		wpas_notify_bss_freq_changed(wpa_s, bss->id);
@@ -670,7 +679,7 @@
 #endif /* CONFIG_P2P */
 	if (bss->ie_len + bss->beacon_ie_len >=
 	    res->ie_len + res->beacon_ie_len) {
-		os_memcpy(bss + 1, res + 1, res->ie_len + res->beacon_ie_len);
+		os_memcpy(bss->ies, res + 1, res->ie_len + res->beacon_ie_len);
 		bss->ie_len = res->ie_len;
 		bss->beacon_ie_len = res->beacon_ie_len;
 	} else {
@@ -691,7 +700,7 @@
 				wpa_s->current_bss = nbss;
 			wpa_bss_update_pending_connect(wpa_s, bss, nbss);
 			bss = nbss;
-			os_memcpy(bss + 1, res + 1,
+			os_memcpy(bss->ies, res + 1,
 				  res->ie_len + res->beacon_ie_len);
 			bss->ie_len = res->ie_len;
 			bss->beacon_ie_len = res->beacon_ie_len;
@@ -1053,7 +1062,7 @@
 	struct wpa_bss *bss, *found = NULL;
 	dl_list_for_each_reverse(bss, &wpa_s->bss, struct wpa_bss, list) {
 		u8 addr[ETH_ALEN];
-		if (p2p_parse_dev_addr((const u8 *) (bss + 1), bss->ie_len,
+		if (p2p_parse_dev_addr(wpa_bss_ie_ptr(bss), bss->ie_len,
 				       addr) != 0 ||
 		    os_memcmp(addr, dev_addr, ETH_ALEN) != 0)
 			continue;
@@ -1117,7 +1126,22 @@
  */
 const u8 * wpa_bss_get_ie(const struct wpa_bss *bss, u8 ie)
 {
-	return get_ie((const u8 *) (bss + 1), bss->ie_len, ie);
+	return get_ie(wpa_bss_ie_ptr(bss), bss->ie_len, ie);
+}
+
+
+/**
+ * wpa_bss_get_ie_ext - Fetch a specified extended IE from a BSS entry
+ * @bss: BSS table entry
+ * @ext: Information element extension identifier (WLAN_EID_EXT_*)
+ * Returns: Pointer to the information element (id field) or %NULL if not found
+ *
+ * This function returns the first matching information element in the BSS
+ * entry.
+ */
+const u8 * wpa_bss_get_ie_ext(const struct wpa_bss *bss, u8 ext)
+{
+	return get_ie_ext(wpa_bss_ie_ptr(bss), bss->ie_len, ext);
 }
 
 
@@ -1132,18 +1156,15 @@
  */
 const u8 * wpa_bss_get_vendor_ie(const struct wpa_bss *bss, u32 vendor_type)
 {
-	const u8 *end, *pos;
+	const u8 *ies;
+	const struct element *elem;
 
-	pos = (const u8 *) (bss + 1);
-	end = pos + bss->ie_len;
+	ies = wpa_bss_ie_ptr(bss);
 
-	while (end - pos > 1) {
-		if (2 + pos[1] > end - pos)
-			break;
-		if (pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
-		    vendor_type == WPA_GET_BE32(&pos[2]))
-			return pos;
-		pos += 2 + pos[1];
+	for_each_element_id(elem, WLAN_EID_VENDOR_SPECIFIC, ies, bss->ie_len) {
+		if (elem->datalen >= 4 &&
+		    vendor_type == WPA_GET_BE32(elem->data))
+			return &elem->id;
 	}
 
 	return NULL;
@@ -1165,22 +1186,20 @@
 const u8 * wpa_bss_get_vendor_ie_beacon(const struct wpa_bss *bss,
 					u32 vendor_type)
 {
-	const u8 *end, *pos;
+	const u8 *ies;
+	const struct element *elem;
 
 	if (bss->beacon_ie_len == 0)
 		return NULL;
 
-	pos = (const u8 *) (bss + 1);
-	pos += bss->ie_len;
-	end = pos + bss->beacon_ie_len;
+	ies = wpa_bss_ie_ptr(bss);
+	ies += bss->ie_len;
 
-	while (end - pos > 1) {
-		if (2 + pos[1] > end - pos)
-			break;
-		if (pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
-		    vendor_type == WPA_GET_BE32(&pos[2]))
-			return pos;
-		pos += 2 + pos[1];
+	for_each_element_id(elem, WLAN_EID_VENDOR_SPECIFIC, ies,
+			    bss->beacon_ie_len) {
+		if (elem->datalen >= 4 &&
+		    vendor_type == WPA_GET_BE32(elem->data))
+			return &elem->id;
 	}
 
 	return NULL;
@@ -1207,16 +1226,21 @@
 	if (buf == NULL)
 		return NULL;
 
-	pos = (const u8 *) (bss + 1);
+	pos = wpa_bss_ie_ptr(bss);
 	end = pos + bss->ie_len;
 
 	while (end - pos > 1) {
-		if (2 + pos[1] > end - pos)
+		u8 ie, len;
+
+		ie = pos[0];
+		len = pos[1];
+		if (len > end - pos - 2)
 			break;
-		if (pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
-		    vendor_type == WPA_GET_BE32(&pos[2]))
-			wpabuf_put_data(buf, pos + 2 + 4, pos[1] - 4);
-		pos += 2 + pos[1];
+		pos += 2;
+		if (ie == WLAN_EID_VENDOR_SPECIFIC && len >= 4 &&
+		    vendor_type == WPA_GET_BE32(pos))
+			wpabuf_put_data(buf, pos + 4, len - 4);
+		pos += len;
 	}
 
 	if (wpabuf_len(buf) == 0) {
@@ -1251,7 +1275,7 @@
 	if (buf == NULL)
 		return NULL;
 
-	pos = (const u8 *) (bss + 1);
+	pos = wpa_bss_ie_ptr(bss);
 	pos += bss->ie_len;
 	end = pos + bss->beacon_ie_len;
 
@@ -1337,7 +1361,7 @@
 
 
 #ifdef CONFIG_FILS
-const u8 * wpa_bss_get_fils_cache_id(struct wpa_bss *bss)
+const u8 * wpa_bss_get_fils_cache_id(const struct wpa_bss *bss)
 {
 	const u8 *ie;
 
@@ -1354,6 +1378,8 @@
 
 int wpa_bss_ext_capab(const struct wpa_bss *bss, unsigned int capab)
 {
+	if (!bss)
+		return 0;
 	return ieee802_11_ext_capab(wpa_bss_get_ie(bss, WLAN_EID_EXT_CAPAB),
 				    capab);
 }
diff --git a/wpa_supplicant/bss.h b/wpa_supplicant/bss.h
index 0716761..4078b9b 100644
--- a/wpa_supplicant/bss.h
+++ b/wpa_supplicant/bss.h
@@ -20,9 +20,20 @@
 #define WPA_BSS_ANQP_FETCH_TRIED	BIT(6)
 #define WPA_BSS_OWE_TRANSITION		BIT(7)
 
+#define WPA_BSS_FREQ_CHANGED_FLAG	BIT(0)
+#define WPA_BSS_SIGNAL_CHANGED_FLAG	BIT(1)
+#define WPA_BSS_PRIVACY_CHANGED_FLAG	BIT(2)
+#define WPA_BSS_MODE_CHANGED_FLAG	BIT(3)
+#define WPA_BSS_WPAIE_CHANGED_FLAG	BIT(4)
+#define WPA_BSS_RSNIE_CHANGED_FLAG	BIT(5)
+#define WPA_BSS_WPS_CHANGED_FLAG	BIT(6)
+#define WPA_BSS_RATES_CHANGED_FLAG	BIT(7)
+#define WPA_BSS_IES_CHANGED_FLAG	BIT(8)
+
 struct wpa_bss_anqp_elem {
 	struct dl_list list;
 	u16 infoid;
+	bool protected_response; /* received in a protected GAS response */
 	struct wpabuf *payload;
 };
 
@@ -111,8 +122,16 @@
 	size_t beacon_ie_len;
 	/* followed by ie_len octets of IEs */
 	/* followed by beacon_ie_len octets of IEs */
+	u8 ies[];
 };
 
+static inline const u8 * wpa_bss_ie_ptr(const struct wpa_bss *bss)
+{
+	return bss->ies;
+}
+
+void notify_bss_changes(struct wpa_supplicant *wpa_s, u32 changes,
+			const struct wpa_bss *bss);
 void wpa_bss_update_start(struct wpa_supplicant *wpa_s);
 void wpa_bss_update_scan_res(struct wpa_supplicant *wpa_s,
 			     struct wpa_scan_res *res,
@@ -137,6 +156,7 @@
 struct wpa_bss * wpa_bss_get_id_range(struct wpa_supplicant *wpa_s,
 				      unsigned int idf, unsigned int idl);
 const u8 * wpa_bss_get_ie(const struct wpa_bss *bss, u8 ie);
+const u8 * wpa_bss_get_ie_ext(const struct wpa_bss *bss, u8 ext);
 const u8 * wpa_bss_get_vendor_ie(const struct wpa_bss *bss, u32 vendor_type);
 const u8 * wpa_bss_get_vendor_ie_beacon(const struct wpa_bss *bss,
 					u32 vendor_type);
@@ -148,7 +168,7 @@
 int wpa_bss_get_bit_rates(const struct wpa_bss *bss, u8 **rates);
 struct wpa_bss_anqp * wpa_bss_anqp_alloc(void);
 int wpa_bss_anqp_unshare_alloc(struct wpa_bss *bss);
-const u8 * wpa_bss_get_fils_cache_id(struct wpa_bss *bss);
+const u8 * wpa_bss_get_fils_cache_id(const struct wpa_bss *bss);
 int wpa_bss_ext_capab(const struct wpa_bss *bss, unsigned int capab);
 
 static inline int bss_is_dmg(const struct wpa_bss *bss)
@@ -169,7 +189,7 @@
 
 static inline void wpa_bss_update_level(struct wpa_bss *bss, int new_level)
 {
-	if (bss != NULL && new_level < 0)
+	if (bss != NULL && new_level > -WPA_INVALID_NOISE && new_level < 0)
 		bss->level = new_level;
 }
 
diff --git a/wpa_supplicant/bssid_ignore.c b/wpa_supplicant/bssid_ignore.c
new file mode 100644
index 0000000..e378577
--- /dev/null
+++ b/wpa_supplicant/bssid_ignore.c
@@ -0,0 +1,221 @@
+/*
+ * wpa_supplicant - List of temporarily ignored BSSIDs
+ * Copyright (c) 2003-2021, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include "includes.h"
+
+#include "common.h"
+#include "wpa_supplicant_i.h"
+#include "bssid_ignore.h"
+
+/**
+ * wpa_bssid_ignore_get - Get the ignore list entry for a BSSID
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @bssid: BSSID
+ * Returns: Matching entry for the BSSID or %NULL if not found
+ */
+struct wpa_bssid_ignore * wpa_bssid_ignore_get(struct wpa_supplicant *wpa_s,
+					       const u8 *bssid)
+{
+	struct wpa_bssid_ignore *e;
+
+	if (wpa_s == NULL || bssid == NULL)
+		return NULL;
+
+	if (wpa_s->current_ssid &&
+	    wpa_s->current_ssid->was_recently_reconfigured) {
+		wpa_bssid_ignore_clear(wpa_s);
+		wpa_s->current_ssid->was_recently_reconfigured = false;
+		return NULL;
+	}
+
+	wpa_bssid_ignore_update(wpa_s);
+
+	e = wpa_s->bssid_ignore;
+	while (e) {
+		if (os_memcmp(e->bssid, bssid, ETH_ALEN) == 0)
+			return e;
+		e = e->next;
+	}
+
+	return NULL;
+}
+
+
+/**
+ * wpa_bssid_ignore_add - Add an BSSID to the ignore list
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @bssid: BSSID to be added to the ignore list
+ * Returns: Current ignore list count on success, -1 on failure
+ *
+ * This function adds the specified BSSID to the ignore list or increases the
+ * ignore count if the BSSID was already listed. It should be called when
+ * an association attempt fails either due to the selected BSS rejecting
+ * association or due to timeout.
+ *
+ * This ignore list is used to force %wpa_supplicant to go through all available
+ * BSSes before retrying to associate with an BSS that rejected or timed out
+ * association. It does not prevent the listed BSS from being used; it only
+ * changes the order in which they are tried.
+ */
+int wpa_bssid_ignore_add(struct wpa_supplicant *wpa_s, const u8 *bssid)
+{
+	struct wpa_bssid_ignore *e;
+	struct os_reltime now;
+
+	if (wpa_s == NULL || bssid == NULL)
+		return -1;
+
+	e = wpa_bssid_ignore_get(wpa_s, bssid);
+	os_get_reltime(&now);
+	if (e) {
+		e->start = now;
+		e->count++;
+		if (e->count > 5)
+			e->timeout_secs = 1800;
+		else if (e->count == 5)
+			e->timeout_secs = 600;
+		else if (e->count == 4)
+			e->timeout_secs = 120;
+		else if (e->count == 3)
+			e->timeout_secs = 60;
+		else
+			e->timeout_secs = 10;
+		wpa_printf(MSG_INFO, "BSSID " MACSTR
+			   " ignore list count incremented to %d, ignoring for %d seconds",
+			   MAC2STR(bssid), e->count, e->timeout_secs);
+		return e->count;
+	}
+
+	e = os_zalloc(sizeof(*e));
+	if (e == NULL)
+		return -1;
+	os_memcpy(e->bssid, bssid, ETH_ALEN);
+	e->count = 1;
+	e->timeout_secs = 10;
+	e->start = now;
+	e->next = wpa_s->bssid_ignore;
+	wpa_s->bssid_ignore = e;
+	wpa_printf(MSG_DEBUG, "Added BSSID " MACSTR
+		   " into ignore list, ignoring for %d seconds",
+		   MAC2STR(bssid), e->timeout_secs);
+
+	return e->count;
+}
+
+
+/**
+ * wpa_bssid_ignore_del - Remove an BSSID from the ignore list
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @bssid: BSSID to be removed from the ignore list
+ * Returns: 0 on success, -1 on failure
+ */
+int wpa_bssid_ignore_del(struct wpa_supplicant *wpa_s, const u8 *bssid)
+{
+	struct wpa_bssid_ignore *e, *prev = NULL;
+
+	if (wpa_s == NULL || bssid == NULL)
+		return -1;
+
+	e = wpa_s->bssid_ignore;
+	while (e) {
+		if (os_memcmp(e->bssid, bssid, ETH_ALEN) == 0) {
+			if (prev == NULL) {
+				wpa_s->bssid_ignore = e->next;
+			} else {
+				prev->next = e->next;
+			}
+			wpa_printf(MSG_DEBUG, "Removed BSSID " MACSTR
+				   " from ignore list", MAC2STR(bssid));
+			os_free(e);
+			return 0;
+		}
+		prev = e;
+		e = e->next;
+	}
+	return -1;
+}
+
+
+/**
+ * wpa_bssid_ignore_is_listed - Check whether a BSSID is ignored temporarily
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @bssid: BSSID to be checked
+ * Returns: count if BSS is currently considered to be ignored, 0 otherwise
+ */
+int wpa_bssid_ignore_is_listed(struct wpa_supplicant *wpa_s, const u8 *bssid)
+{
+	struct wpa_bssid_ignore *e;
+	struct os_reltime now;
+
+	e = wpa_bssid_ignore_get(wpa_s, bssid);
+	if (!e)
+		return 0;
+	os_get_reltime(&now);
+	if (os_reltime_expired(&now, &e->start, e->timeout_secs))
+		return 0;
+	return e->count;
+}
+
+
+/**
+ * wpa_bssid_ignore_clear - Clear the ignore list of all entries
+ * @wpa_s: Pointer to wpa_supplicant data
+ */
+void wpa_bssid_ignore_clear(struct wpa_supplicant *wpa_s)
+{
+	struct wpa_bssid_ignore *e, *prev;
+
+	e = wpa_s->bssid_ignore;
+	wpa_s->bssid_ignore = NULL;
+	while (e) {
+		prev = e;
+		e = e->next;
+		wpa_printf(MSG_DEBUG, "Removed BSSID " MACSTR
+			   " from ignore list (clear)", MAC2STR(prev->bssid));
+		os_free(prev);
+	}
+}
+
+
+/**
+ * wpa_bssid_ignore_update - Update the entries in the ignore list,
+ * deleting entries that have been expired for over an hour.
+ * @wpa_s: Pointer to wpa_supplicant data
+ */
+void wpa_bssid_ignore_update(struct wpa_supplicant *wpa_s)
+{
+	struct wpa_bssid_ignore *e, *prev = NULL;
+	struct os_reltime now;
+
+	if (!wpa_s)
+		return;
+
+	e = wpa_s->bssid_ignore;
+	os_get_reltime(&now);
+	while (e) {
+		if (os_reltime_expired(&now, &e->start,
+				       e->timeout_secs + 3600)) {
+			struct wpa_bssid_ignore *to_delete = e;
+
+			if (prev) {
+				prev->next = e->next;
+				e = prev->next;
+			} else {
+				wpa_s->bssid_ignore = e->next;
+				e = wpa_s->bssid_ignore;
+			}
+			wpa_printf(MSG_INFO, "Removed BSSID " MACSTR
+				   " from ignore list (expired)",
+				   MAC2STR(to_delete->bssid));
+			os_free(to_delete);
+		} else {
+			prev = e;
+			e = e->next;
+		}
+	}
+}
diff --git a/wpa_supplicant/bssid_ignore.h b/wpa_supplicant/bssid_ignore.h
new file mode 100644
index 0000000..721b0e1
--- /dev/null
+++ b/wpa_supplicant/bssid_ignore.h
@@ -0,0 +1,33 @@
+/*
+ * wpa_supplicant - List of temporarily ignored BSSIDs
+ * Copyright (c) 2003-2021, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef BSSID_IGNORE_H
+#define BSSID_IGNORE_H
+
+struct wpa_bssid_ignore {
+	struct wpa_bssid_ignore *next;
+	u8 bssid[ETH_ALEN];
+	int count;
+	/* Time of the most recent trigger to ignore this BSSID. */
+	struct os_reltime start;
+	/*
+	 * Number of seconds after start that the entey will be considered
+	 * valid.
+	 */
+	int timeout_secs;
+};
+
+struct wpa_bssid_ignore * wpa_bssid_ignore_get(struct wpa_supplicant *wpa_s,
+					 const u8 *bssid);
+int wpa_bssid_ignore_add(struct wpa_supplicant *wpa_s, const u8 *bssid);
+int wpa_bssid_ignore_del(struct wpa_supplicant *wpa_s, const u8 *bssid);
+int wpa_bssid_ignore_is_listed(struct wpa_supplicant *wpa_s, const u8 *bssid);
+void wpa_bssid_ignore_clear(struct wpa_supplicant *wpa_s);
+void wpa_bssid_ignore_update(struct wpa_supplicant *wpa_s);
+
+#endif /* BSSID_IGNORE_H */
diff --git a/wpa_supplicant/config.c b/wpa_supplicant/config.c
index 0d5b285..5901946 100644
--- a/wpa_supplicant/config.c
+++ b/wpa_supplicant/config.c
@@ -442,47 +442,99 @@
 #endif /* NO_CONFIG_WRITE */
 
 
+static int wpa_config_parse_bssid_ignore(const struct parse_data *data,
+					 struct wpa_ssid *ssid, int line,
+					 const char *value)
+{
+	return wpa_config_parse_addr_list(data, line, value,
+					  &ssid->bssid_ignore,
+					  &ssid->num_bssid_ignore,
+					  "bssid_ignore", 1, 1);
+}
+
+
+/* deprecated alias for bssid_ignore for backwards compatibility */
 static int wpa_config_parse_bssid_blacklist(const struct parse_data *data,
 					    struct wpa_ssid *ssid, int line,
 					    const char *value)
 {
 	return wpa_config_parse_addr_list(data, line, value,
-					  &ssid->bssid_blacklist,
-					  &ssid->num_bssid_blacklist,
-					  "bssid_blacklist", 1, 1);
+					  &ssid->bssid_ignore,
+					  &ssid->num_bssid_ignore,
+					  "bssid_ignore", 1, 1);
 }
 
 
 #ifndef NO_CONFIG_WRITE
+
+static char * wpa_config_write_bssid_ignore(const struct parse_data *data,
+					    struct wpa_ssid *ssid)
+{
+	return wpa_config_write_addr_list(data, ssid->bssid_ignore,
+					  ssid->num_bssid_ignore,
+					  "bssid_ignore");
+}
+
+
+/* deprecated alias for bssid_ignore for backwards compatibility */
 static char * wpa_config_write_bssid_blacklist(const struct parse_data *data,
 					       struct wpa_ssid *ssid)
 {
-	return wpa_config_write_addr_list(data, ssid->bssid_blacklist,
-					  ssid->num_bssid_blacklist,
-					  "bssid_blacklist");
+	return wpa_config_write_addr_list(data, ssid->bssid_ignore,
+					  ssid->num_bssid_ignore,
+					  "bssid_ignore");
 }
+
 #endif /* NO_CONFIG_WRITE */
 
 
+static int wpa_config_parse_bssid_accept(const struct parse_data *data,
+					 struct wpa_ssid *ssid, int line,
+					 const char *value)
+{
+	return wpa_config_parse_addr_list(data, line, value,
+					  &ssid->bssid_accept,
+					  &ssid->num_bssid_accept,
+					  "bssid_accept", 1, 1);
+}
+
+
+/* deprecated alias for bssid_accept for backwards compatibility */
 static int wpa_config_parse_bssid_whitelist(const struct parse_data *data,
 					    struct wpa_ssid *ssid, int line,
 					    const char *value)
 {
 	return wpa_config_parse_addr_list(data, line, value,
-					  &ssid->bssid_whitelist,
-					  &ssid->num_bssid_whitelist,
-					  "bssid_whitelist", 1, 1);
+					  &ssid->bssid_accept,
+					  &ssid->num_bssid_accept,
+					  "bssid_accept", 1, 1);
 }
 
 
 #ifndef NO_CONFIG_WRITE
+
+static char * wpa_config_write_bssid_accept(const struct parse_data *data,
+					    struct wpa_ssid *ssid)
+{
+	return wpa_config_write_addr_list(data, ssid->bssid_accept,
+					  ssid->num_bssid_accept,
+					  "bssid_accept");
+}
+
+
+/* deprecated alias for bssid_accept for backwards compatibility */
 static char * wpa_config_write_bssid_whitelist(const struct parse_data *data,
 					       struct wpa_ssid *ssid)
 {
-	return wpa_config_write_addr_list(data, ssid->bssid_whitelist,
-					  ssid->num_bssid_whitelist,
-					  "bssid_whitelist");
+	return wpa_config_write_addr_list(data, ssid->bssid_accept,
+					  ssid->num_bssid_accept,
+					  "bssid_accept");
 }
+
+#endif /* NO_CONFIG_WRITE */
+
+
+#ifndef NO_CONFIG_WRITE
 #endif /* NO_CONFIG_WRITE */
 
 
@@ -2362,8 +2414,10 @@
 	{ INT_RANGE(scan_ssid, 0, 1) },
 	{ FUNC(bssid) },
 	{ FUNC(bssid_hint) },
-	{ FUNC(bssid_blacklist) },
-	{ FUNC(bssid_whitelist) },
+	{ FUNC(bssid_ignore) },
+	{ FUNC(bssid_accept) },
+	{ FUNC(bssid_blacklist) }, /* deprecated alias for bssid_ignore */
+	{ FUNC(bssid_whitelist) }, /* deprecated alias for bssid_accept */
 	{ FUNC_KEY(psk) },
 	{ INT(mem_only_psk) },
 	{ STR_KEY(sae_password) },
@@ -2763,8 +2817,8 @@
 	os_free(ssid->freq_list);
 	os_free(ssid->bgscan);
 	os_free(ssid->p2p_client_list);
-	os_free(ssid->bssid_blacklist);
-	os_free(ssid->bssid_whitelist);
+	os_free(ssid->bssid_ignore);
+	os_free(ssid->bssid_accept);
 #ifdef CONFIG_HT_OVERRIDES
 	os_free(ssid->ht_mcs);
 #endif /* CONFIG_HT_OVERRIDES */
@@ -2890,6 +2944,7 @@
 	os_free(config->p2p_no_go_freq.range);
 	os_free(config->autoscan);
 	os_free(config->freq_list);
+	os_free(config->initial_freq_list);
 	wpabuf_free(config->wps_nfc_dh_pubkey);
 	wpabuf_free(config->wps_nfc_dh_privkey);
 	wpabuf_free(config->wps_nfc_dev_pw);
@@ -4308,6 +4363,7 @@
 	config->ap_isolate = DEFAULT_AP_ISOLATE;
 	config->access_network_type = DEFAULT_ACCESS_NETWORK_TYPE;
 	config->scan_cur_freq = DEFAULT_SCAN_CUR_FREQ;
+	config->scan_res_valid_for_connect = DEFAULT_SCAN_RES_VALID_FOR_CONNECT;
 	config->wmm_ac_params[0] = ac_be;
 	config->wmm_ac_params[1] = ac_bk;
 	config->wmm_ac_params[2] = ac_vi;
@@ -4470,9 +4526,7 @@
 		prev_len = 0;
 
 	/* No change to the previously configured value */
-	if ((!(*dst) && !pos) ||
-	    (*dst && pos && prev_len == len &&
-	     os_memcmp(*dst, pos, len) == 0))
+	if (*dst && prev_len == len && os_memcmp(*dst, pos, len) == 0)
 		return 1;
 
 	tmp = os_strdup(pos);
@@ -4550,6 +4604,26 @@
 }
 
 
+static int
+wpa_config_process_initial_freq_list(const struct global_parse_data *data,
+				     struct wpa_config *config, int line,
+				     const char *value)
+{
+	int *freqs;
+
+	freqs = wpa_config_parse_int_array(value);
+	if (!freqs)
+		return -1;
+	if (freqs[0] == 0) {
+		os_free(freqs);
+		freqs = NULL;
+	}
+	os_free(config->initial_freq_list);
+	config->initial_freq_list = freqs;
+	return 0;
+}
+
+
 #ifdef CONFIG_P2P
 static int wpa_global_config_parse_ipv4(const struct global_parse_data *data,
 					struct wpa_config *config, int line,
@@ -5084,7 +5158,9 @@
 	{ FUNC(ap_vendor_elements), 0 },
 	{ INT_RANGE(ignore_old_scan_res, 0, 1), 0 },
 	{ FUNC(freq_list), 0 },
+	{ FUNC(initial_freq_list), 0},
 	{ INT(scan_cur_freq), 0 },
+	{ INT(scan_res_valid_for_connect), 0},
 	{ INT(sched_scan_interval), 0 },
 	{ INT(sched_scan_start_delay), 0 },
 	{ INT(tdls_external_control), 0},
@@ -5130,6 +5206,12 @@
 	{ INT_RANGE(disable_btm, 0, 1), CFG_CHANGED_DISABLE_BTM },
 	{ INT_RANGE(extended_key_id, 0, 1), 0 },
 #endif /* CONFIG_WNM */
+	{ INT_RANGE(wowlan_disconnect_on_deinit, 0, 1), 0},
+#ifdef CONFIG_PASN
+#ifdef CONFIG_TESTING_OPTIONS
+	{ INT_RANGE(force_kdk_derivation, 0, 1), 0 },
+#endif /* CONFIG_TESTING_OPTIONS */
+#endif /* CONFIG_PASN */
 };
 
 #undef FUNC
diff --git a/wpa_supplicant/config.h b/wpa_supplicant/config.h
index 868a8b3..7e69343 100644
--- a/wpa_supplicant/config.h
+++ b/wpa_supplicant/config.h
@@ -46,6 +46,7 @@
 #define DEFAULT_OCE_SUPPORT OCE_STA
 #define DEFAULT_EXTENDED_KEY_ID 0
 #define DEFAULT_BTM_OFFLOAD 0
+#define DEFAULT_SCAN_RES_VALID_FOR_CONNECT 5
 
 #include "config_ssid.h"
 #include "wps/wps.h"
@@ -652,7 +653,7 @@
 	 * This variable control whether wpa_supplicant is allow to re-write
 	 * its configuration with wpa_config_write(). If this is zero,
 	 * configuration data is only changed in memory and the external data
-	 * is not overriden. If this is non-zero, wpa_supplicant will update
+	 * is not overridden. If this is non-zero, wpa_supplicant will update
 	 * the configuration data (e.g., a file) whenever configuration is
 	 * changed. This update may replace the old configuration which can
 	 * remove comments from it in case of a text file configuration.
@@ -919,6 +920,19 @@
 	int *freq_list;
 
 	/**
+	 * initial_freq_list - like freq_list but for initial scan
+	 *
+	 * This is an optional zero-terminated array of frequencies in
+	 * megahertz (MHz) to allow for narrowing scanning range when
+	 * the application is started.
+	 *
+	 * This can be used to speed up initial connection time if the
+	 * channel is known ahead of time, without limiting the scanned
+	 * frequencies during normal use.
+	 */
+	int *initial_freq_list;
+
+	/**
 	 * scan_cur_freq - Whether to scan only the current channel
 	 *
 	 * If true, attempt to scan only the current channel if any other
@@ -927,6 +941,15 @@
 	int scan_cur_freq;
 
 	/**
+	 * scan_res_valid_for_connect - Seconds scans are valid for association
+	 *
+	 * This configures the number of seconds old scan results are considered
+	 * valid for association. When scan results are older than this value
+	 * a new scan is triggered prior to the association.
+	 */
+	int scan_res_valid_for_connect;
+
+	/**
 	 * changed_parameters - Bitmap of changed parameters since last update
 	 */
 	unsigned int changed_parameters;
@@ -1551,9 +1574,31 @@
 	/**
 	 * p2p_device_random_mac_addr - P2P Device MAC address policy default
 	 *
-	 * 0 = use permanent MAC address
+	 * 0 = use permanent MAC address (the one set by default by the device
+	 *     driver). Notice that, if the device driver is configured to
+	 *     always use random MAC addresses, this flag breaks reinvoking a
+	 *     persistent group, so flags 1 or 2 should be used instead with
+	 *     such drivers if persistent groups are used.
 	 * 1 = use random MAC address on creating the interface if there is no
-	 * persistent groups.
+	 *     persistent group. Besides, if a persistent group is created,
+	 *     p2p_device_persistent_mac_addr is set to the MAC address of the
+	 *     P2P Device interface, so that this address will be subsequently
+	 *     used to change the MAC address of the P2P Device interface. With
+	 *     no persistent group, the random MAC address is created by
+	 *     wpa_supplicant, changing the one set by the device driver.
+	 *     The device driver shall support SIOCGIFFLAGS/SIOCSIFFLAGS ioctl
+	 *     interface control operations.
+	 * 2 = this flag should be used when the device driver uses random MAC
+	 *     addresses by default when a P2P Device interface is created.
+	 *     If p2p_device_persistent_mac_addr is set, use this MAC address
+	 *     on creating the P2P Device interface. If not set, use the
+	 *     default method adopted by the device driver (e.g., random MAC
+	 *     address). Besides, if a persistent group is created,
+	 *     p2p_device_persistent_mac_addr is set to the MAC address of the
+	 *     P2P Device interface, so that this address will be subsequently
+	 *     used in place of the default address set by the device driver.
+	 *     (This option does not need support of SIOCGIFFLAGS/SIOCSIFFLAGS
+	 *     ioctl interface control operations and uses NL80211_ATTR_MAC).
 	 *
 	 * By default, permanent MAC address is used.
 	 */
@@ -1604,6 +1649,25 @@
 	 * 1 = use Extended Key ID when possible
 	 */
 	int extended_key_id;
+
+	/**
+	 * wowlan_disconnect_on_deinit - Trigger disconnect on wpa_supplicant
+	 * interface deinit even if the driver has enabled WoWLAN.
+	 *
+	 * 0 = Do not disconnect
+	 * 1 = Trigger disconnection
+	 */
+	int wowlan_disconnect_on_deinit;
+
+#ifdef CONFIG_PASN
+#ifdef CONFIG_TESTING_OPTIONS
+	/*
+	 * Normally, KDK should be derived if and only if both sides support
+	 * secure LTF. Allow forcing KDK derivation for testing purposes.
+	 */
+	int force_kdk_derivation;
+#endif /* CONFIG_TESTING_OPTIONS */
+#endif /* CONFIG_PASN*/
 };
 
 
diff --git a/wpa_supplicant/config_file.c b/wpa_supplicant/config_file.c
index 74f91d3..9fbfbf9 100644
--- a/wpa_supplicant/config_file.c
+++ b/wpa_supplicant/config_file.c
@@ -23,105 +23,7 @@
 #include "p2p/p2p.h"
 #include "eap_peer/eap_methods.h"
 #include "eap_peer/eap.h"
-
-
-static int newline_terminated(const char *buf, size_t buflen)
-{
-	size_t len = os_strlen(buf);
-	if (len == 0)
-		return 0;
-	if (len == buflen - 1 && buf[buflen - 1] != '\r' &&
-	    buf[len - 1] != '\n')
-		return 0;
-	return 1;
-}
-
-
-static void skip_line_end(FILE *stream)
-{
-	char buf[100];
-	while (fgets(buf, sizeof(buf), stream)) {
-		buf[sizeof(buf) - 1] = '\0';
-		if (newline_terminated(buf, sizeof(buf)))
-			return;
-	}
-}
-
-
-/**
- * wpa_config_get_line - Read the next configuration file line
- * @s: Buffer for the line
- * @size: The buffer length
- * @stream: File stream to read from
- * @line: Pointer to a variable storing the file line number
- * @_pos: Buffer for the pointer to the beginning of data on the text line or
- * %NULL if not needed (returned value used instead)
- * Returns: Pointer to the beginning of data on the text line or %NULL if no
- * more text lines are available.
- *
- * This function reads the next non-empty line from the configuration file and
- * removes comments. The returned string is guaranteed to be null-terminated.
- */
-static char * wpa_config_get_line(char *s, int size, FILE *stream, int *line,
-				  char **_pos)
-{
-	char *pos, *end, *sstart;
-
-	while (fgets(s, size, stream)) {
-		(*line)++;
-		s[size - 1] = '\0';
-		if (!newline_terminated(s, size)) {
-			/*
-			 * The line was truncated - skip rest of it to avoid
-			 * confusing error messages.
-			 */
-			wpa_printf(MSG_INFO, "Long line in configuration file "
-				   "truncated");
-			skip_line_end(stream);
-		}
-		pos = s;
-
-		/* Skip white space from the beginning of line. */
-		while (*pos == ' ' || *pos == '\t' || *pos == '\r')
-			pos++;
-
-		/* Skip comment lines and empty lines */
-		if (*pos == '#' || *pos == '\n' || *pos == '\0')
-			continue;
-
-		/*
-		 * Remove # comments unless they are within a double quoted
-		 * string.
-		 */
-		sstart = os_strchr(pos, '"');
-		if (sstart)
-			sstart = os_strrchr(sstart + 1, '"');
-		if (!sstart)
-			sstart = pos;
-		end = os_strchr(sstart, '#');
-		if (end)
-			*end-- = '\0';
-		else
-			end = pos + os_strlen(pos) - 1;
-
-		/* Remove trailing white space. */
-		while (end > pos &&
-		       (*end == '\n' || *end == ' ' || *end == '\t' ||
-			*end == '\r'))
-			*end-- = '\0';
-
-		if (*pos == '\0')
-			continue;
-
-		if (_pos)
-			*_pos = pos;
-		return pos;
-	}
-
-	if (_pos)
-		*_pos = NULL;
-	return NULL;
-}
+#include "utils/config.h"
 
 
 static int wpa_config_validate_network(struct wpa_ssid *ssid, int line)
@@ -767,8 +669,8 @@
 	INT(scan_ssid);
 	write_bssid(f, ssid);
 	write_bssid_hint(f, ssid);
-	write_str(f, "bssid_blacklist", ssid);
-	write_str(f, "bssid_whitelist", ssid);
+	write_str(f, "bssid_ignore", ssid);
+	write_str(f, "bssid_accept", ssid);
 	write_psk(f, ssid);
 	INT(mem_only_psk);
 	STR(sae_password);
@@ -1475,9 +1377,23 @@
 		}
 		fprintf(f, "\n");
 	}
+	if (config->initial_freq_list && config->initial_freq_list[0]) {
+		int i;
+		fprintf(f, "initial_freq_list=");
+		for (i = 0; config->initial_freq_list[i]; i++) {
+			fprintf(f, "%s%d", i > 0 ? " " : "",
+				config->initial_freq_list[i]);
+		}
+		fprintf(f, "\n");
+	}
 	if (config->scan_cur_freq != DEFAULT_SCAN_CUR_FREQ)
 		fprintf(f, "scan_cur_freq=%d\n", config->scan_cur_freq);
 
+	if (config->scan_res_valid_for_connect !=
+	    DEFAULT_SCAN_RES_VALID_FOR_CONNECT)
+		fprintf(f, "scan_res_valid_for_connect=%d\n",
+			config->scan_res_valid_for_connect);
+
 	if (config->sched_scan_interval)
 		fprintf(f, "sched_scan_interval=%u\n",
 			config->sched_scan_interval);
@@ -1614,6 +1530,9 @@
 	if (config->extended_key_id != DEFAULT_EXTENDED_KEY_ID)
 		fprintf(f, "extended_key_id=%d\n",
 			config->extended_key_id);
+	if (config->wowlan_disconnect_on_deinit)
+		fprintf(f, "wowlan_disconnect_on_deinit=%d\n",
+			config->wowlan_disconnect_on_deinit);
 }
 
 #endif /* CONFIG_NO_CONFIG_WRITE */
diff --git a/wpa_supplicant/config_ssid.h b/wpa_supplicant/config_ssid.h
index ecf258c..d1ff5f8 100644
--- a/wpa_supplicant/config_ssid.h
+++ b/wpa_supplicant/config_ssid.h
@@ -152,16 +152,16 @@
 	u8 bssid[ETH_ALEN];
 
 	/**
-	 * bssid_blacklist - List of inacceptable BSSIDs
+	 * bssid_ignore - List of inacceptable BSSIDs
 	 */
-	u8 *bssid_blacklist;
-	size_t num_bssid_blacklist;
+	u8 *bssid_ignore;
+	size_t num_bssid_ignore;
 
 	/**
-	 * bssid_blacklist - List of acceptable BSSIDs
+	 * bssid_accept - List of acceptable BSSIDs
 	 */
-	u8 *bssid_whitelist;
-	size_t num_bssid_whitelist;
+	u8 *bssid_accept;
+	size_t num_bssid_accept;
 
 	/**
 	 * bssid_set - Whether BSSID is configured for this network
diff --git a/wpa_supplicant/ctrl_iface.c b/wpa_supplicant/ctrl_iface.c
index f5c6587..0d4c2bc 100644
--- a/wpa_supplicant/ctrl_iface.c
+++ b/wpa_supplicant/ctrl_iface.c
@@ -22,6 +22,7 @@
 #ifdef CONFIG_DPP
 #include "common/dpp.h"
 #endif /* CONFIG_DPP */
+#include "common/ptksa_cache.h"
 #include "crypto/tls.h"
 #include "ap/hostapd.h"
 #include "eap_peer/eap.h"
@@ -48,7 +49,7 @@
 #include "scan.h"
 #include "ctrl_iface.h"
 #include "interworking.h"
-#include "blacklist.h"
+#include "bssid_ignore.h"
 #include "autoscan.h"
 #include "wnm_sta.h"
 #include "offchannel.h"
@@ -299,20 +300,30 @@
 }
 
 
-static int wpas_ctrl_set_band(struct wpa_supplicant *wpa_s, char *band)
+static int wpas_ctrl_set_band(struct wpa_supplicant *wpa_s, char *bands)
 {
 	union wpa_event_data event;
+	u32 setband_mask = WPA_SETBAND_AUTO;
 
-	if (os_strcmp(band, "AUTO") == 0)
-		wpa_s->setband = WPA_SETBAND_AUTO;
-	else if (os_strcmp(band, "5G") == 0)
-		wpa_s->setband = WPA_SETBAND_5G;
-	else if (os_strcmp(band, "2G") == 0)
-		wpa_s->setband = WPA_SETBAND_2G;
-	else
-		return -1;
+	/*
+	 * For example:
+	 *  SET setband 2G,6G
+	 *  SET setband 5G
+	 *  SET setband AUTO
+	 */
+	if (!os_strstr(bands, "AUTO")) {
+		if (os_strstr(bands, "5G"))
+			setband_mask |= WPA_SETBAND_5G;
+		if (os_strstr(bands, "6G"))
+			setband_mask |= WPA_SETBAND_6G;
+		if (os_strstr(bands, "2G"))
+			setband_mask |= WPA_SETBAND_2G;
+		if (setband_mask == WPA_SETBAND_AUTO)
+			return -1;
+	}
 
-	if (wpa_drv_setband(wpa_s, wpa_s->setband) == 0) {
+	wpa_s->setband_mask = setband_mask;
+	if (wpa_drv_setband(wpa_s, wpa_s->setband_mask) == 0) {
 		os_memset(&event, 0, sizeof(event));
 		event.channel_list_changed.initiator = REGDOM_SET_BY_USER;
 		event.channel_list_changed.type = REGDOM_TYPE_UNKNOWN;
@@ -2543,20 +2554,20 @@
 }
 
 
-static int wpa_supplicant_ctrl_iface_blacklist(struct wpa_supplicant *wpa_s,
-					       char *cmd, char *buf,
-					       size_t buflen)
+static int wpa_supplicant_ctrl_iface_bssid_ignore(struct wpa_supplicant *wpa_s,
+						  char *cmd, char *buf,
+						  size_t buflen)
 {
 	u8 bssid[ETH_ALEN];
-	struct wpa_blacklist *e;
+	struct wpa_bssid_ignore *e;
 	char *pos, *end;
 	int ret;
 
-	/* cmd: "BLACKLIST [<BSSID>]" */
+	/* cmd: "BSSID_IGNORE [<BSSID>]" */
 	if (*cmd == '\0') {
 		pos = buf;
 		end = buf + buflen;
-		e = wpa_s->blacklist;
+		e = wpa_s->bssid_ignore;
 		while (e) {
 			ret = os_snprintf(pos, end - pos, MACSTR "\n",
 					  MAC2STR(e->bssid));
@@ -2570,12 +2581,12 @@
 
 	cmd++;
 	if (os_strncmp(cmd, "clear", 5) == 0) {
-		wpa_blacklist_clear(wpa_s);
+		wpa_bssid_ignore_clear(wpa_s);
 		os_memcpy(buf, "OK\n", 3);
 		return 3;
 	}
 
-	wpa_printf(MSG_DEBUG, "CTRL_IFACE: BLACKLIST bssid='%s'", cmd);
+	wpa_printf(MSG_DEBUG, "CTRL_IFACE: BSSID_IGNORE bssid='%s'", cmd);
 	if (hwaddr_aton(cmd, bssid)) {
 		wpa_printf(MSG_DEBUG, "CTRL_IFACE: invalid BSSID '%s'", cmd);
 		return -1;
@@ -2585,10 +2596,10 @@
 	 * Add the BSSID twice, so its count will be 2, causing it to be
 	 * skipped when processing scan results.
 	 */
-	ret = wpa_blacklist_add(wpa_s, bssid);
+	ret = wpa_bssid_ignore_add(wpa_s, bssid);
 	if (ret < 0)
 		return -1;
-	ret = wpa_blacklist_add(wpa_s, bssid);
+	ret = wpa_bssid_ignore_add(wpa_s, bssid);
 	if (ret < 0)
 		return -1;
 	os_memcpy(buf, "OK\n", 3);
@@ -3030,8 +3041,7 @@
 	if (bss_is_dmg(bss)) {
 		const char *s;
 
-		if (get_ie_ext((const u8 *) (bss + 1), bss->ie_len,
-			       WLAN_EID_EXT_EDMG_OPERATION)) {
+		if (wpa_bss_get_ie_ext(bss, WLAN_EID_EXT_EDMG_OPERATION)) {
 			ret = os_snprintf(pos, end - pos, "[EDMG]");
 			if (os_snprintf_error(end - pos, ret))
 				return -1;
@@ -4489,6 +4499,15 @@
 #endif /* CONFIG_FILS_SK_PFS */
 #endif /* CONFIG_FILS */
 
+#ifdef CONFIG_PASN
+	ret = os_snprintf(pos, end - pos, "%sPASN",
+			  pos == buf ? "" : " ");
+	if (os_snprintf_error(end - pos, ret))
+		return pos - buf;
+	pos += ret;
+
+#endif /* CONFIG_PASN */
+
 	return pos - buf;
 }
 
@@ -4814,6 +4833,31 @@
 	}
 #endif /* CONFIG_SAE */
 
+#ifdef CONFIG_OCV
+	if (os_strcmp(field, "ocv") == 0) {
+		if ((wpa_s->drv_flags & WPA_DRIVER_FLAGS_SME) ||
+		    (wpa_s->drv_flags2 & WPA_DRIVER_FLAGS2_OCV))
+			res = os_snprintf(buf, buflen, "supported");
+		else
+			res = os_snprintf(buf, buflen, "not supported");
+		if (os_snprintf_error(buflen, res))
+			return -1;
+		return res;
+	}
+#endif /* CONFIG_OCV */
+
+	if (os_strcmp(field, "beacon_prot") == 0) {
+		if ((wpa_s->drv_flags & WPA_DRIVER_FLAGS_BEACON_PROTECTION) ||
+		    (wpa_s->drv_flags2 &
+		     WPA_DRIVER_FLAGS2_BEACON_PROTECTION_CLIENT))
+			res = os_snprintf(buf, buflen, "supported");
+		else
+			res = os_snprintf(buf, buflen, "not supported");
+		if (os_snprintf_error(buflen, res))
+			return -1;
+		return res;
+	}
+
 	wpa_printf(MSG_DEBUG, "CTRL_IFACE: Unknown GET_CAPABILITY field '%s'",
 		   field);
 
@@ -5023,7 +5067,7 @@
 			return 0;
 		pos += ret;
 
-		ie = (const u8 *) (bss + 1);
+		ie = wpa_bss_ie_ptr(bss);
 		for (i = 0; i < bss->ie_len; i++) {
 			ret = os_snprintf(pos, end - pos, "%02x", *ie++);
 			if (os_snprintf_error(end - pos, ret))
@@ -5190,7 +5234,7 @@
 
 #ifdef CONFIG_WPS
 	if (mask & WPA_BSS_MASK_WPS_SCAN) {
-		ie = (const u8 *) (bss + 1);
+		ie = wpa_bss_ie_ptr(bss);
 		ret = wpas_wps_scan_result_text(ie, bss->ie_len, pos, end);
 		if (ret >= end - pos)
 			return 0;
@@ -5201,7 +5245,7 @@
 
 #ifdef CONFIG_P2P
 	if (mask & WPA_BSS_MASK_P2P_SCAN) {
-		ie = (const u8 *) (bss + 1);
+		ie = wpa_bss_ie_ptr(bss);
 		ret = wpas_p2p_scan_result_text(ie, bss->ie_len, pos, end);
 		if (ret >= end - pos)
 			return 0;
@@ -5213,7 +5257,8 @@
 #ifdef CONFIG_WIFI_DISPLAY
 	if (mask & WPA_BSS_MASK_WIFI_DISPLAY) {
 		struct wpabuf *wfd;
-		ie = (const u8 *) (bss + 1);
+
+		ie = wpa_bss_ie_ptr(bss);
 		wfd = ieee802_11_vendor_ie_concat(ie, bss->ie_len,
 						  WFD_IE_VENDOR_TYPE);
 		if (wfd) {
@@ -5285,13 +5330,21 @@
 			os_snprintf(title, sizeof(title), "anqp[%u]",
 				    elem->infoid);
 			pos = anqp_add_hex(pos, end, title, elem->payload);
+			if (elem->protected_response) {
+				ret = os_snprintf(pos, end - pos,
+						  "protected-anqp-info[%u]=1\n",
+						  elem->infoid);
+				if (os_snprintf_error(end - pos, ret))
+					return 0;
+				pos += ret;
+			}
 		}
 	}
 #endif /* CONFIG_INTERWORKING */
 
 #ifdef CONFIG_MESH
 	if (mask & WPA_BSS_MASK_MESH_SCAN) {
-		ie = (const u8 *) (bss + 1);
+		ie = wpa_bss_ie_ptr(bss);
 		ret = wpas_mesh_scan_result_text(ie, bss->ie_len, pos, end);
 		if (ret >= end - pos)
 			return 0;
@@ -5338,7 +5391,7 @@
 			return 0;
 		pos += ret;
 
-		ie = (const u8 *) (bss + 1);
+		ie = wpa_bss_ie_ptr(bss);
 		ie += bss->ie_len;
 		for (i = 0; i < bss->beacon_ie_len; i++) {
 			ret = os_snprintf(pos, end - pos, "%02x", *ie++);
@@ -8236,13 +8289,17 @@
 				     char *buf, size_t buflen)
 {
 	int ret;
-	char *pos;
+	char *pos, *temp = NULL;
 	u8 *data = NULL;
 	unsigned int vendor_id, subcmd;
+	enum nested_attr nested_attr_flag = NESTED_ATTR_UNSPECIFIED;
 	struct wpabuf *reply;
 	size_t data_len = 0;
 
-	/* cmd: <vendor id> <subcommand id> [<hex formatted data>] */
+	/**
+	 * cmd: <vendor id> <subcommand id> [<hex formatted data>]
+	 * [nested=<0|1>]
+	 */
 	vendor_id = strtoul(cmd, &pos, 16);
 	if (!isblank((unsigned char) *pos))
 		return -EINVAL;
@@ -8252,7 +8309,9 @@
 	if (*pos != '\0') {
 		if (!isblank((unsigned char) *pos++))
 			return -EINVAL;
-		data_len = os_strlen(pos);
+
+		temp = os_strchr(pos, ' ');
+		data_len = temp ? (size_t) (temp - pos) : os_strlen(pos);
 	}
 
 	if (data_len) {
@@ -8269,6 +8328,11 @@
 		}
 	}
 
+	pos = os_strstr(cmd, "nested=");
+	if (pos)
+		nested_attr_flag = atoi(pos + 7) ? NESTED_ATTR_USED :
+			NESTED_ATTR_NOT_USED;
+
 	reply = wpabuf_alloc((buflen - 1) / 2);
 	if (!reply) {
 		os_free(data);
@@ -8276,7 +8340,7 @@
 	}
 
 	ret = wpa_drv_vendor_cmd(wpa_s, vendor_id, subcmd, data, data_len,
-				 reply);
+				 nested_attr_flag, reply);
 
 	if (ret == 0)
 		ret = wpa_snprintf_hex(buf, buflen, wpabuf_head_u8(reply),
@@ -8395,13 +8459,14 @@
 	wpa_s->consecutive_conn_failures = 0;
 
 	wpa_drv_radio_disable(wpa_s, 0);
-	wpa_blacklist_clear(wpa_s);
+	wpa_bssid_ignore_clear(wpa_s);
 	wpa_supplicant_ctrl_iface_remove_network(wpa_s, "all");
 	wpa_supplicant_ctrl_iface_remove_cred(wpa_s, "all");
 	wpa_config_flush_blobs(wpa_s->conf);
 	wpa_s->conf->auto_interworking = 0;
 	wpa_s->conf->okc = 0;
 
+	ptksa_cache_flush(wpa_s->ptksa, NULL, WPA_CIPHER_NONE);
 	wpa_sm_pmksa_cache_flush(wpa_s->wpa, NULL);
 	rsn_preauth_deinit(wpa_s->wpa);
 
@@ -8502,6 +8567,13 @@
 	free_bss_tmp_disallowed(wpa_s);
 
 	os_memset(&wpa_s->robust_av, 0, sizeof(struct robust_av_data));
+
+#ifdef CONFIG_PASN
+	wpas_pasn_auth_stop(wpa_s);
+#endif /* CONFIG_PASN */
+
+	if (wpa_s->mac_addr_changed && wpa_s->conf->mac_addr == 0)
+		wpas_restore_permanent_mac_addr(wpa_s);
 }
 
 
@@ -9755,8 +9827,7 @@
 
 	if (wpa_s->vendor_elem[frame] == NULL) {
 		wpa_s->vendor_elem[frame] = buf;
-		wpas_vendor_elem_update(wpa_s);
-		return 0;
+		goto update_ies;
 	}
 
 	if (wpabuf_resize(&wpa_s->vendor_elem[frame], len) < 0) {
@@ -9766,8 +9837,14 @@
 
 	wpabuf_put_buf(wpa_s->vendor_elem[frame], buf);
 	wpabuf_free(buf);
+
+update_ies:
 	wpas_vendor_elem_update(wpa_s);
 
+	if (frame == VENDOR_ELEM_PROBE_REQ ||
+	    frame == VENDOR_ELEM_PROBE_REQ_P2P)
+		wpa_supplicant_set_default_scan_ies(wpa_s);
+
 	return 0;
 }
 
@@ -10074,6 +10151,7 @@
 
 static void wpas_ctrl_iface_pmksa_flush(struct wpa_supplicant *wpa_s)
 {
+	ptksa_cache_flush(wpa_s->ptksa, NULL, WPA_CIPHER_NONE);
 	wpa_sm_pmksa_cache_flush(wpa_s->wpa, NULL);
 #ifdef CONFIG_AP
 	wpas_ap_pmksa_cache_flush(wpa_s);
@@ -10278,7 +10356,7 @@
 					  char *cmd)
 {
 	/*
-	 * We do not check mesh interface existance because PMKSA should be
+	 * We do not check mesh interface existence because PMKSA should be
 	 * stored before wpa_s->ifmsh creation to suppress commit message
 	 * creation.
 	 */
@@ -10406,6 +10484,73 @@
 }
 
 
+#ifdef CONFIG_PASN
+static int wpas_ctrl_iface_pasn_start(struct wpa_supplicant *wpa_s, char *cmd)
+{
+	char *token, *context = NULL;
+	u8 bssid[ETH_ALEN];
+	int akmp = -1, cipher = -1, got_bssid = 0;
+	u16 group = 0xFFFF;
+	int id = 0;
+
+	/*
+	 * Entry format: bssid=<BSSID> akmp=<AKMP> cipher=<CIPHER> group=<group>
+	 */
+	while ((token = str_token(cmd, " ", &context))) {
+		if (os_strncmp(token, "bssid=", 6) == 0) {
+			if (hwaddr_aton(token + 6, bssid))
+				return -1;
+			got_bssid = 1;
+		} else if (os_strcmp(token, "akmp=PASN") == 0) {
+			akmp = WPA_KEY_MGMT_PASN;
+#ifdef CONFIG_IEEE80211R
+		} else if (os_strcmp(token, "akmp=FT-PSK") == 0) {
+			akmp = WPA_KEY_MGMT_FT_PSK;
+		} else if (os_strcmp(token, "akmp=FT-EAP-SHA384") == 0) {
+			akmp = WPA_KEY_MGMT_FT_IEEE8021X_SHA384;
+		} else if (os_strcmp(token, "akmp=FT-EAP") == 0) {
+			akmp = WPA_KEY_MGMT_FT_IEEE8021X;
+#endif /* CONFIG_IEEE80211R */
+#ifdef CONFIG_SAE
+		} else if (os_strcmp(token, "akmp=SAE") == 0) {
+			akmp = WPA_KEY_MGMT_SAE;
+#endif /* CONFIG_SAE */
+#ifdef CONFIG_FILS
+		} else if (os_strcmp(token, "akmp=FILS-SHA256") == 0) {
+			akmp = WPA_KEY_MGMT_FILS_SHA256;
+		} else if (os_strcmp(token, "akmp=FILS-SHA384") == 0) {
+			akmp = WPA_KEY_MGMT_FILS_SHA384;
+#endif /* CONFIG_FILS */
+		} else if (os_strcmp(token, "cipher=CCMP-256") == 0) {
+			cipher = WPA_CIPHER_CCMP_256;
+		} else if (os_strcmp(token, "cipher=GCMP-256") == 0) {
+			cipher = WPA_CIPHER_GCMP_256;
+		} else if (os_strcmp(token, "cipher=CCMP") == 0) {
+			cipher = WPA_CIPHER_CCMP;
+		} else if (os_strcmp(token, "cipher=GCMP") == 0) {
+			cipher = WPA_CIPHER_GCMP;
+		} else if (os_strncmp(token, "group=", 6) == 0) {
+			group = atoi(token + 6);
+		} else if (os_strncmp(token, "nid=", 4) == 0) {
+			id = atoi(token + 4);
+		} else {
+			wpa_printf(MSG_DEBUG,
+				   "CTRL: PASN Invalid parameter: '%s'",
+				   token);
+			return -1;
+		}
+	}
+
+	if (!got_bssid || akmp == -1 || cipher == -1 || group == 0xFFFF) {
+		wpa_printf(MSG_DEBUG,"CTRL: PASN missing parameter");
+		return -1;
+	}
+
+	return wpas_pasn_auth_start(wpa_s, bssid, akmp, cipher, group, id);
+}
+#endif /* CONFIG_PASN */
+
+
 char * wpa_supplicant_ctrl_iface_process(struct wpa_supplicant *wpa_s,
 					 char *buf, size_t *resp_len)
 {
@@ -10864,8 +11009,12 @@
 	} else if (os_strncmp(buf, "BSSID ", 6) == 0) {
 		if (wpa_supplicant_ctrl_iface_bssid(wpa_s, buf + 6))
 			reply_len = -1;
+	} else if (os_strncmp(buf, "BSSID_IGNORE", 12) == 0) {
+		reply_len = wpa_supplicant_ctrl_iface_bssid_ignore(
+			wpa_s, buf + 12, reply, reply_size);
 	} else if (os_strncmp(buf, "BLACKLIST", 9) == 0) {
-		reply_len = wpa_supplicant_ctrl_iface_blacklist(
+		/* deprecated backwards compatibility alias for BSSID_IGNORE */
+		reply_len = wpa_supplicant_ctrl_iface_bssid_ignore(
 			wpa_s, buf + 9, reply, reply_size);
 	} else if (os_strncmp(buf, "LOG_LEVEL", 9) == 0) {
 		reply_len = wpa_supplicant_ctrl_iface_log_level(
@@ -11300,6 +11449,15 @@
 	} else if (os_strncmp(buf, "MSCS ", 5) == 0) {
 		if (wpas_ctrl_iface_configure_mscs(wpa_s, buf + 5))
 			reply_len = -1;
+#ifdef CONFIG_PASN
+	} else if (os_strncmp(buf, "PASN_START ", 11) == 0) {
+		if (wpas_ctrl_iface_pasn_start(wpa_s, buf + 11) < 0)
+			reply_len = -1;
+	} else if (os_strcmp(buf, "PASN_STOP") == 0) {
+		wpas_pasn_auth_stop(wpa_s);
+	} else if (os_strcmp(buf, "PTKSA_CACHE_LIST") == 0) {
+		reply_len = ptksa_cache_list(wpa_s->ptksa, reply, reply_size);
+#endif /* CONFIG_PASN */
 	} else {
 		os_memcpy(reply, "UNKNOWN COMMAND\n", 16);
 		reply_len = 16;
diff --git a/wpa_supplicant/dbus/dbus_common.c b/wpa_supplicant/dbus/dbus_common.c
index efa6c7b..a727217 100644
--- a/wpa_supplicant/dbus/dbus_common.c
+++ b/wpa_supplicant/dbus/dbus_common.c
@@ -108,17 +108,18 @@
 	flags = dbus_watch_get_flags(watch);
 	fd = dbus_watch_get_unix_fd(watch);
 
-	eloop_register_sock(fd, EVENT_TYPE_EXCEPTION, process_watch_exception,
-			    priv, watch);
+	if (eloop_register_sock(fd, EVENT_TYPE_EXCEPTION,
+				process_watch_exception, priv, watch) < 0)
+		return FALSE;
 
-	if (flags & DBUS_WATCH_READABLE) {
-		eloop_register_sock(fd, EVENT_TYPE_READ, process_watch_read,
-				    priv, watch);
-	}
-	if (flags & DBUS_WATCH_WRITABLE) {
-		eloop_register_sock(fd, EVENT_TYPE_WRITE, process_watch_write,
-				    priv, watch);
-	}
+	if ((flags & DBUS_WATCH_READABLE) &&
+	    eloop_register_sock(fd, EVENT_TYPE_READ, process_watch_read,
+				priv, watch) < 0)
+		return FALSE;
+	if ((flags & DBUS_WATCH_WRITABLE) &&
+	    eloop_register_sock(fd, EVENT_TYPE_WRITE, process_watch_write,
+				priv, watch) < 0)
+		return FALSE;
 
 	dbus_watch_set_data(watch, priv, NULL);
 
diff --git a/wpa_supplicant/dbus/dbus_new.c b/wpa_supplicant/dbus/dbus_new.c
index 6dcd948..2c01943 100644
--- a/wpa_supplicant/dbus/dbus_new.c
+++ b/wpa_supplicant/dbus/dbus_new.c
@@ -1824,7 +1824,7 @@
  * @sa: station addr (p2p i/f) of the peer
  * @dialog_token: service discovery request dialog token
  * @update_indic: service discovery request update indicator
- * @tlvs: service discovery request genrated byte array of tlvs
+ * @tlvs: service discovery request generated byte array of tlvs
  * @tlvs_len: service discovery request tlvs length
  */
 void wpas_dbus_signal_p2p_sd_request(struct wpa_supplicant *wpa_s,
@@ -1893,7 +1893,7 @@
  * @wpa_s: %wpa_supplicant network interface data
  * @sa: station addr (p2p i/f) of the peer
  * @update_indic: service discovery request update indicator
- * @tlvs: service discovery request genrated byte array of tlvs
+ * @tlvs: service discovery request generated byte array of tlvs
  * @tlvs_len: service discovery request tlvs length
  */
 void wpas_dbus_signal_p2p_sd_response(struct wpa_supplicant *wpa_s,
diff --git a/wpa_supplicant/dbus/dbus_new_handlers.c b/wpa_supplicant/dbus/dbus_new_handlers.c
index 86f8560..7d20f21 100644
--- a/wpa_supplicant/dbus/dbus_new_handlers.c
+++ b/wpa_supplicant/dbus/dbus_new_handlers.c
@@ -138,7 +138,9 @@
 static const char * const dont_quote[] = {
 	"key_mgmt", "proto", "pairwise", "auth_alg", "group", "eap",
 	"bssid", "scan_freq", "freq_list", "scan_ssid", "bssid_hint",
-	"bssid_blacklist", "bssid_whitelist", "group_mgmt",
+	"bssid_ignore", "bssid_accept", /* deprecated aliases */
+	"bssid_blacklist", "bssid_whitelist",
+	"group_mgmt",
 	"ignore_broadcast_ssid",
 #ifdef CONFIG_MESH
 	"mesh_basic_rates",
@@ -1011,7 +1013,7 @@
 	const struct wpa_dbus_property_desc *property_desc,
 	DBusMessageIter *iter, DBusError *error, void *user_data)
 {
-	const char *capabilities[12];
+	const char *capabilities[13];
 	size_t num_items = 0;
 	struct wpa_global *global = user_data;
 	struct wpa_supplicant *wpa_s;
@@ -1062,6 +1064,9 @@
 #ifdef CONFIG_OWE
 	capabilities[num_items++] = "owe";
 #endif /* CONFIG_OWE */
+#ifdef CONFIG_SUITEB192
+	capabilities[num_items++] = "suiteb192";
+#endif /* CONFIG_SUITEB192 */
 	if (ext_key_id_supported)
 		capabilities[num_items++] = "extended_key_id";
 
@@ -1697,7 +1702,8 @@
  * Returns: NULL
  *
  * Handler function for notifying system there will be a expected disconnect.
- * This will prevent wpa_supplicant from adding blacklists upon next disconnect..
+ * This will prevent wpa_supplicant from adding the BSSID to the ignore list
+ * upon next disconnect.
  */
 DBusMessage * wpas_dbus_handler_expect_disconnect(DBusMessage *message,
 						  struct wpa_global *global)
@@ -2568,7 +2574,7 @@
  * wpas_dbus_handler_save_config - Save configuration to configuration file
  * @message: Pointer to incoming dbus message
  * @wpa_s: wpa_supplicant structure for a network interface
- * Returns: NULL on Success, Otherwise errror message
+ * Returns: NULL on Success, Otherwise error message
  *
  * Handler function for "SaveConfig" method call of network interface.
  */
@@ -2869,6 +2875,12 @@
 			goto nomem;
 #endif /* CONFIG_SAE */
 
+#ifdef CONFIG_OWE
+		if ((capa.key_mgmt & WPA_DRIVER_CAPA_KEY_MGMT_OWE) &&
+		    !wpa_dbus_dict_string_array_add_element(&iter_array, "owe"))
+			goto nomem;
+#endif /* CONFIG_OWE */
+
 		if (!wpa_dbus_dict_end_string_array(&iter_dict,
 						    &iter_dict_entry,
 						    &iter_dict_val,
@@ -5073,8 +5085,8 @@
 		return FALSE;
 
 	return wpas_dbus_simple_array_property_getter(iter, DBUS_TYPE_BYTE,
-						      res + 1, res->ie_len,
-						      error);
+						      wpa_bss_ie_ptr(res),
+						      res->ie_len, error);
 }
 
 
diff --git a/wpa_supplicant/defconfig b/wpa_supplicant/defconfig
index 7e06fdd..a6cd933 100644
--- a/wpa_supplicant/defconfig
+++ b/wpa_supplicant/defconfig
@@ -530,6 +530,8 @@
 #
 # External password backend for testing purposes (developer use)
 #CONFIG_EXT_PASSWORD_TEST=y
+# File-based backend to read passwords from an external file.
+#CONFIG_EXT_PASSWORD_FILE=y
 
 # Enable Fast Session Transfer (FST)
 #CONFIG_FST=y
@@ -626,3 +628,9 @@
 # in the future.
 #CONFIG_NO_TKIP=y
 
+# Pre-Association Security Negotiation (PASN)
+# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
+# design is still subject to change. As such, this should not yet be enabled in
+# production use.
+#CONFIG_PASN=y
+
diff --git a/wpa_supplicant/doc/docbook/eapol_test.sgml b/wpa_supplicant/doc/docbook/eapol_test.sgml
index e7705ab..4cfa3c1 100644
--- a/wpa_supplicant/doc/docbook/eapol_test.sgml
+++ b/wpa_supplicant/doc/docbook/eapol_test.sgml
@@ -1,6 +1,10 @@
 <!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
 
 <refentry>
+  <refentryinfo>
+    <date>07 August 2019</date>
+  </refentryinfo>
+
   <refmeta>
     <refentrytitle>eapol_test</refentrytitle>
     <manvolnum>8</manvolnum>
diff --git a/wpa_supplicant/doc/docbook/wpa_background.sgml b/wpa_supplicant/doc/docbook/wpa_background.sgml
index f6a0ca8..22241cc 100644
--- a/wpa_supplicant/doc/docbook/wpa_background.sgml
+++ b/wpa_supplicant/doc/docbook/wpa_background.sgml
@@ -1,6 +1,10 @@
 <!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
 
 <refentry>
+  <refentryinfo>
+    <date>07 August 2019</date>
+  </refentryinfo>
+
   <refmeta>
     <refentrytitle>wpa_background</refentrytitle>
     <manvolnum>8</manvolnum>
diff --git a/wpa_supplicant/doc/docbook/wpa_cli.sgml b/wpa_supplicant/doc/docbook/wpa_cli.sgml
index dc7fee4..2ba1fe4 100644
--- a/wpa_supplicant/doc/docbook/wpa_cli.sgml
+++ b/wpa_supplicant/doc/docbook/wpa_cli.sgml
@@ -1,6 +1,10 @@
 <!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
 
 <refentry>
+  <refentryinfo>
+    <date>07 August 2019</date>
+  </refentryinfo>
+
   <refmeta>
     <refentrytitle>wpa_cli</refentrytitle>
     <manvolnum>8</manvolnum>
diff --git a/wpa_supplicant/doc/docbook/wpa_gui.sgml b/wpa_supplicant/doc/docbook/wpa_gui.sgml
index 31214e3..cb0c735 100644
--- a/wpa_supplicant/doc/docbook/wpa_gui.sgml
+++ b/wpa_supplicant/doc/docbook/wpa_gui.sgml
@@ -1,6 +1,10 @@
 <!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
 
 <refentry>
+  <refentryinfo>
+    <date>07 August 2019</date>
+  </refentryinfo>
+
   <refmeta>
     <refentrytitle>wpa_gui</refentrytitle>
     <manvolnum>8</manvolnum>
diff --git a/wpa_supplicant/doc/docbook/wpa_passphrase.sgml b/wpa_supplicant/doc/docbook/wpa_passphrase.sgml
index ed9baf1..0772969 100644
--- a/wpa_supplicant/doc/docbook/wpa_passphrase.sgml
+++ b/wpa_supplicant/doc/docbook/wpa_passphrase.sgml
@@ -1,6 +1,10 @@
 <!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
 
 <refentry>
+  <refentryinfo>
+    <date>07 August 2019</date>
+  </refentryinfo>
+
   <refmeta>
     <refentrytitle>wpa_passphrase</refentrytitle>
     <manvolnum>8</manvolnum>
diff --git a/wpa_supplicant/doc/docbook/wpa_priv.sgml b/wpa_supplicant/doc/docbook/wpa_priv.sgml
index dd44565..0d5c94a 100644
--- a/wpa_supplicant/doc/docbook/wpa_priv.sgml
+++ b/wpa_supplicant/doc/docbook/wpa_priv.sgml
@@ -1,6 +1,10 @@
 <!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
 
 <refentry>
+  <refentryinfo>
+    <date>07 August 2019</date>
+  </refentryinfo>
+
   <refmeta>
     <refentrytitle>wpa_priv</refentrytitle>
     <manvolnum>8</manvolnum>
diff --git a/wpa_supplicant/doc/docbook/wpa_supplicant.conf.sgml b/wpa_supplicant/doc/docbook/wpa_supplicant.conf.sgml
index 462039d..8a0314e 100644
--- a/wpa_supplicant/doc/docbook/wpa_supplicant.conf.sgml
+++ b/wpa_supplicant/doc/docbook/wpa_supplicant.conf.sgml
@@ -1,5 +1,9 @@
 <!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
 <refentry>
+  <refentryinfo>
+    <date>07 August 2019</date>
+  </refentryinfo>
+
   <refmeta>
     <refentrytitle>wpa_supplicant.conf</refentrytitle>
     <manvolnum>5</manvolnum>
diff --git a/wpa_supplicant/doc/docbook/wpa_supplicant.sgml b/wpa_supplicant/doc/docbook/wpa_supplicant.sgml
index aaff150..144654a 100644
--- a/wpa_supplicant/doc/docbook/wpa_supplicant.sgml
+++ b/wpa_supplicant/doc/docbook/wpa_supplicant.sgml
@@ -1,6 +1,10 @@
 <!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
 
 <refentry>
+  <refentryinfo>
+    <date>07 August 2019</date>
+  </refentryinfo>
+
   <refmeta>
     <refentrytitle>wpa_supplicant</refentrytitle>
     <manvolnum>8</manvolnum>
diff --git a/wpa_supplicant/dpp_supplicant.c b/wpa_supplicant/dpp_supplicant.c
index 2d0c636..d935215 100644
--- a/wpa_supplicant/dpp_supplicant.c
+++ b/wpa_supplicant/dpp_supplicant.c
@@ -33,6 +33,7 @@
 static int wpas_dpp_listen_start(struct wpa_supplicant *wpa_s,
 				 unsigned int freq);
 static void wpas_dpp_reply_wait_timeout(void *eloop_ctx, void *timeout_ctx);
+static void wpas_dpp_auth_conf_wait_timeout(void *eloop_ctx, void *timeout_ctx);
 static void wpas_dpp_auth_success(struct wpa_supplicant *wpa_s, int initiator);
 static void wpas_dpp_tx_status(struct wpa_supplicant *wpa_s,
 			       unsigned int freq, const u8 *dst,
@@ -474,6 +475,8 @@
 			   "DPP: Terminate authentication exchange due to a request to do so on TX status");
 		eloop_cancel_timeout(wpas_dpp_init_timeout, wpa_s, NULL);
 		eloop_cancel_timeout(wpas_dpp_reply_wait_timeout, wpa_s, NULL);
+		eloop_cancel_timeout(wpas_dpp_auth_conf_wait_timeout, wpa_s,
+				     NULL);
 		eloop_cancel_timeout(wpas_dpp_auth_resp_retry_timeout, wpa_s,
 				     NULL);
 #ifdef CONFIG_DPP2
@@ -506,6 +509,17 @@
 		}
 	}
 
+	if (auth->waiting_auth_conf &&
+	    auth->auth_resp_status == DPP_STATUS_OK) {
+		/* Make sure we do not get stuck waiting for Auth Confirm
+		 * indefinitely after successfully transmitted Auth Response to
+		 * allow new authentication exchanges to be started. */
+		eloop_cancel_timeout(wpas_dpp_auth_conf_wait_timeout, wpa_s,
+				     NULL);
+		eloop_register_timeout(1, 0, wpas_dpp_auth_conf_wait_timeout,
+				       wpa_s, NULL);
+	}
+
 	if (!is_broadcast_ether_addr(dst) && auth->waiting_auth_resp &&
 	    result == OFFCHANNEL_SEND_ACTION_SUCCESS) {
 		/* Allow timeout handling to stop iteration if no response is
@@ -595,6 +609,23 @@
 }
 
 
+static void wpas_dpp_auth_conf_wait_timeout(void *eloop_ctx, void *timeout_ctx)
+{
+	struct wpa_supplicant *wpa_s = eloop_ctx;
+	struct dpp_authentication *auth = wpa_s->dpp_auth;
+
+	if (!auth || !auth->waiting_auth_conf)
+		return;
+
+	wpa_printf(MSG_DEBUG,
+		   "DPP: Terminate authentication exchange due to Auth Confirm timeout");
+	wpa_msg(wpa_s, MSG_INFO, DPP_EVENT_FAIL "No Auth Confirm received");
+	offchannel_send_action_done(wpa_s);
+	dpp_auth_deinit(auth);
+	wpa_s->dpp_auth = NULL;
+}
+
+
 static void wpas_dpp_set_testing_options(struct wpa_supplicant *wpa_s,
 					 struct dpp_authentication *auth)
 {
@@ -681,7 +712,9 @@
 	freq = auth->freq[auth->freq_idx++];
 	auth->curr_freq = freq;
 
-	if (is_zero_ether_addr(auth->peer_bi->mac_addr))
+	if (!is_zero_ether_addr(auth->peer_mac_addr))
+		dst = auth->peer_mac_addr;
+	else if (is_zero_ether_addr(auth->peer_bi->mac_addr))
 		dst = broadcast;
 	else
 		dst = auth->peer_bi->mac_addr;
@@ -812,6 +845,8 @@
 	if (!tcp && wpa_s->dpp_auth) {
 		eloop_cancel_timeout(wpas_dpp_init_timeout, wpa_s, NULL);
 		eloop_cancel_timeout(wpas_dpp_reply_wait_timeout, wpa_s, NULL);
+		eloop_cancel_timeout(wpas_dpp_auth_conf_wait_timeout, wpa_s,
+				     NULL);
 		eloop_cancel_timeout(wpas_dpp_auth_resp_retry_timeout, wpa_s,
 				     NULL);
 #ifdef CONFIG_DPP2
@@ -1414,6 +1449,8 @@
 				      struct dpp_config_obj *conf)
 {
 	wpa_msg(wpa_s, MSG_INFO, DPP_EVENT_CONF_RECEIVED);
+	wpa_msg(wpa_s, MSG_INFO, DPP_EVENT_CONFOBJ_AKM "%s",
+		dpp_akm_str(conf->akm));
 	if (conf->ssid_len)
 		wpa_msg(wpa_s, MSG_INFO, DPP_EVENT_CONFOBJ_SSID "%s",
 			wpa_ssid_txt(conf->ssid, conf->ssid_len));
@@ -1429,6 +1466,21 @@
 		wpa_msg(wpa_s, MSG_INFO, DPP_EVENT_CONNECTOR "%s",
 			conf->connector);
 	}
+	if (conf->passphrase[0]) {
+		char hex[64 * 2 + 1];
+
+		wpa_snprintf_hex(hex, sizeof(hex),
+				 (const u8 *) conf->passphrase,
+				 os_strlen(conf->passphrase));
+		wpa_msg(wpa_s, MSG_INFO, DPP_EVENT_CONFOBJ_PASS "%s",
+			hex);
+	} else if (conf->psk_set) {
+		char hex[PMK_LEN * 2 + 1];
+
+		wpa_snprintf_hex(hex, sizeof(hex), conf->psk, PMK_LEN);
+		wpa_msg(wpa_s, MSG_INFO, DPP_EVENT_CONFOBJ_PSK "%s",
+			hex);
+	}
 	if (conf->c_sign_key) {
 		char *hex;
 		size_t hexlen;
@@ -1818,6 +1870,8 @@
 		return;
 	}
 
+	eloop_cancel_timeout(wpas_dpp_auth_conf_wait_timeout, wpa_s, NULL);
+
 	if (dpp_auth_conf_rx(auth, hdr, buf, len) < 0) {
 		wpa_printf(MSG_DEBUG, "DPP: Authentication failed");
 		wpas_notify_dpp_auth_failure(wpa_s);
@@ -1877,9 +1931,22 @@
 		   MAC2STR(src));
 
 	if (!auth || !auth->waiting_conf_result) {
-		wpa_printf(MSG_DEBUG,
-			   "DPP: No DPP Configuration waiting for result - drop");
-		return;
+		if (auth &&
+		    os_memcmp(src, auth->peer_mac_addr, ETH_ALEN) == 0 &&
+		    gas_server_response_sent(wpa_s->gas_server,
+					     auth->gas_server_ctx)) {
+			/* This could happen if the TX status event gets delayed
+			 * long enough for the Enrollee to have time to send
+			 * the next frame before the TX status gets processed
+			 * locally. */
+			wpa_printf(MSG_DEBUG,
+				   "DPP: GAS response was sent but TX status not yet received - assume it was ACKed since the Enrollee sent the next frame in the sequence");
+			auth->waiting_conf_result = 1;
+		} else {
+			wpa_printf(MSG_DEBUG,
+				   "DPP: No DPP Configuration waiting for result - drop");
+			return;
+		}
 	}
 
 	if (os_memcmp(src, auth->peer_mac_addr, ETH_ALEN) != 0) {
@@ -2041,8 +2108,9 @@
 
 	auth->neg_freq = freq;
 
-	if (!is_zero_ether_addr(peer_bi->mac_addr))
-		os_memcpy(auth->peer_mac_addr, peer_bi->mac_addr, ETH_ALEN);
+	/* The source address of the Presence Announcement frame overrides any
+	 * MAC address information from the bootstrapping information. */
+	os_memcpy(auth->peer_mac_addr, src, ETH_ALEN);
 
 	wpa_s->dpp_auth = auth;
 	if (wpas_dpp_auth_init_next(wpa_s) < 0) {
@@ -2936,6 +3004,7 @@
 		wpas_notify_dpp_configuration_failure(wpa_s);
 	}
 	auth->conf_resp = resp;
+	auth->gas_server_ctx = resp_ctx;
 	return resp;
 }
 
@@ -2969,10 +3038,12 @@
 	wpa_printf(MSG_DEBUG, "DPP: Configuration exchange completed (ok=%d)",
 		   ok);
 	eloop_cancel_timeout(wpas_dpp_reply_wait_timeout, wpa_s, NULL);
+	eloop_cancel_timeout(wpas_dpp_auth_conf_wait_timeout, wpa_s, NULL);
 	eloop_cancel_timeout(wpas_dpp_auth_resp_retry_timeout, wpa_s, NULL);
 #ifdef CONFIG_DPP2
 	if (ok && auth->peer_version >= 2 &&
-	    auth->conf_resp_status == DPP_STATUS_OK) {
+	    auth->conf_resp_status == DPP_STATUS_OK &&
+	    !auth->waiting_conf_result) {
 		wpa_printf(MSG_DEBUG, "DPP: Wait for Configuration Result");
 		wpas_notify_dpp_config_sent_wait_response(wpa_s);
 		auth->waiting_conf_result = 1;
@@ -3351,6 +3422,7 @@
 		return;
 	eloop_cancel_timeout(wpas_dpp_pkex_retry_timeout, wpa_s, NULL);
 	eloop_cancel_timeout(wpas_dpp_reply_wait_timeout, wpa_s, NULL);
+	eloop_cancel_timeout(wpas_dpp_auth_conf_wait_timeout, wpa_s, NULL);
 	eloop_cancel_timeout(wpas_dpp_init_timeout, wpa_s, NULL);
 	eloop_cancel_timeout(wpas_dpp_auth_resp_retry_timeout, wpa_s, NULL);
 #ifdef CONFIG_DPP2
@@ -3520,7 +3592,7 @@
 
 	/* Preferred chirping channels */
 	mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes,
-			HOSTAPD_MODE_IEEE80211G, 0);
+			HOSTAPD_MODE_IEEE80211G, false);
 	chan6 = mode == NULL;
 	if (mode) {
 		for (c = 0; c < mode->num_channels; c++) {
@@ -3537,7 +3609,7 @@
 		int_array_add_unique(&wpa_s->dpp_chirp_freqs, 2437);
 
 	mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes,
-			HOSTAPD_MODE_IEEE80211A, 0);
+			HOSTAPD_MODE_IEEE80211A, false);
 	if (mode) {
 		int chan44 = 0, chan149 = 0;
 
@@ -3559,7 +3631,7 @@
 	}
 
 	mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes,
-			HOSTAPD_MODE_IEEE80211AD, 0);
+			HOSTAPD_MODE_IEEE80211AD, false);
 	if (mode) {
 		for (c = 0; c < mode->num_channels; c++) {
 			struct hostapd_channel_data *chan = &mode->channels[c];
@@ -3598,6 +3670,17 @@
 	if (wpa_s->dpp_chirp_freq == 0) {
 		if (wpa_s->dpp_chirp_round % 4 == 0 &&
 		    !wpa_s->dpp_chirp_scan_done) {
+			if (wpas_scan_scheduled(wpa_s)) {
+				wpa_printf(MSG_DEBUG,
+					   "DPP: Deferring chirp scan because another scan is planned already");
+				if (eloop_register_timeout(1, 0,
+							   wpas_dpp_chirp_next,
+							   wpa_s, NULL) < 0) {
+					wpas_dpp_chirp_stop(wpa_s);
+					return;
+				}
+				return;
+			}
 			wpa_printf(MSG_DEBUG,
 				   "DPP: Update channel list for chirping");
 			wpa_s->scan_req = MANUAL_SCAN_REQ;
diff --git a/wpa_supplicant/driver_i.h b/wpa_supplicant/driver_i.h
index ba8cc55..237f4e0 100644
--- a/wpa_supplicant/driver_i.h
+++ b/wpa_supplicant/driver_i.h
@@ -719,12 +719,14 @@
 
 static inline int wpa_drv_vendor_cmd(struct wpa_supplicant *wpa_s,
 				     int vendor_id, int subcmd, const u8 *data,
-				     size_t data_len, struct wpabuf *buf)
+				     size_t data_len,
+				     enum nested_attr nested_attr_flag,
+				     struct wpabuf *buf)
 {
 	if (!wpa_s->driver->vendor_cmd)
 		return -1;
 	return wpa_s->driver->vendor_cmd(wpa_s->drv_priv, vendor_id, subcmd,
-					 data, data_len, buf);
+					 data, data_len, nested_attr_flag, buf);
 }
 
 static inline int wpa_drv_roaming(struct wpa_supplicant *wpa_s, int allowed,
@@ -952,11 +954,11 @@
 #endif /* CONFIG_MACSEC */
 
 static inline int wpa_drv_setband(struct wpa_supplicant *wpa_s,
-				  enum set_band band)
+				  u32 band_mask)
 {
 	if (!wpa_s->driver->set_band)
 		return -1;
-	return wpa_s->driver->set_band(wpa_s->drv_priv, band);
+	return wpa_s->driver->set_band(wpa_s->drv_priv, band_mask);
 }
 
 static inline int wpa_drv_get_pref_freq_list(struct wpa_supplicant *wpa_s,
diff --git a/wpa_supplicant/events.c b/wpa_supplicant/events.c
index 3165903..f821709 100644
--- a/wpa_supplicant/events.c
+++ b/wpa_supplicant/events.c
@@ -30,8 +30,9 @@
 #include "common/ieee802_11_common.h"
 #include "common/gas_server.h"
 #include "common/dpp.h"
+#include "common/ptksa_cache.h"
 #include "crypto/random.h"
-#include "blacklist.h"
+#include "bssid_ignore.h"
 #include "wpas_glue.h"
 #include "wps_supplicant.h"
 #include "ibss_rsn.h"
@@ -1086,7 +1087,7 @@
 
 static bool wpa_scan_res_ok(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid,
 			    const u8 *match_ssid, size_t match_ssid_len,
-			    struct wpa_bss *bss, int blacklist_count,
+			    struct wpa_bss *bss, int bssid_ignore_count,
 			    bool debug_print);
 
 
@@ -1118,7 +1119,7 @@
 		if (bss->est_throughput < 2000)
 			return false;
 
-		count = wpa_blacklist_is_blacklisted(wpa_s, bss->bssid);
+		count = wpa_bssid_ignore_is_listed(wpa_s, bss->bssid);
 		if (wpa_scan_res_ok(wpa_s, ssid, match_ssid, match_ssid_len,
 				    bss, count, 0))
 			return true;
@@ -1131,7 +1132,7 @@
 
 static bool wpa_scan_res_ok(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid,
 			    const u8 *match_ssid, size_t match_ssid_len,
-			    struct wpa_bss *bss, int blacklist_count,
+			    struct wpa_bss *bss, int bssid_ignore_count,
 			    bool debug_print)
 {
 	int res;
@@ -1179,10 +1180,10 @@
 	}
 
 #ifdef CONFIG_WPS
-	if ((ssid->key_mgmt & WPA_KEY_MGMT_WPS) && blacklist_count) {
+	if ((ssid->key_mgmt & WPA_KEY_MGMT_WPS) && bssid_ignore_count) {
 		if (debug_print)
 			wpa_dbg(wpa_s, MSG_DEBUG,
-				"   skip - blacklisted (WPS)");
+				"   skip - BSSID ignored (WPS)");
 		return false;
 	}
 
@@ -1217,23 +1218,23 @@
 		return false;
 	}
 
-	/* check blacklist */
-	if (ssid->num_bssid_blacklist &&
-	    addr_in_list(bss->bssid, ssid->bssid_blacklist,
-			 ssid->num_bssid_blacklist)) {
+	/* check the list of BSSIDs to ignore */
+	if (ssid->num_bssid_ignore &&
+	    addr_in_list(bss->bssid, ssid->bssid_ignore,
+			 ssid->num_bssid_ignore)) {
 		if (debug_print)
 			wpa_dbg(wpa_s, MSG_DEBUG,
-				"   skip - BSSID blacklisted");
+				"   skip - BSSID configured to be ignored");
 		return false;
 	}
 
-	/* if there is a whitelist, only accept those APs */
-	if (ssid->num_bssid_whitelist &&
-	    !addr_in_list(bss->bssid, ssid->bssid_whitelist,
-			  ssid->num_bssid_whitelist)) {
+	/* if there is a list of accepted BSSIDs, only accept those APs */
+	if (ssid->num_bssid_accept &&
+	    !addr_in_list(bss->bssid, ssid->bssid_accept,
+			  ssid->num_bssid_accept)) {
 		if (debug_print)
 			wpa_dbg(wpa_s, MSG_DEBUG,
-				"   skip - BSSID not in whitelist");
+				"   skip - BSSID not in list of accepted values");
 		return false;
 	}
 
@@ -1478,7 +1479,7 @@
 	int osen;
 	const u8 *match_ssid;
 	size_t match_ssid_len;
-	int blacklist_count;
+	int bssid_ignore_count;
 
 	ie = wpa_bss_get_vendor_ie(bss, WPA_IE_VENDOR_TYPE);
 	wpa_ie_len = ie ? ie[1] : 0;
@@ -1504,13 +1505,13 @@
 			osen ? " osen=1" : "");
 	}
 
-	blacklist_count = wpa_blacklist_is_blacklisted(wpa_s, bss->bssid);
-	if (blacklist_count) {
+	bssid_ignore_count = wpa_bssid_ignore_is_listed(wpa_s, bss->bssid);
+	if (bssid_ignore_count) {
 		int limit = 1;
 		if (wpa_supplicant_enabled_networks(wpa_s) == 1) {
 			/*
 			 * When only a single network is enabled, we can
-			 * trigger blacklisting on the first failure. This
+			 * trigger BSSID ignoring on the first failure. This
 			 * should not be done with multiple enabled networks to
 			 * avoid getting forced to move into a worse ESS on
 			 * single error if there are no other BSSes of the
@@ -1518,11 +1519,11 @@
 			 */
 			limit = 0;
 		}
-		if (blacklist_count > limit) {
+		if (bssid_ignore_count > limit) {
 			if (debug_print) {
 				wpa_dbg(wpa_s, MSG_DEBUG,
-					"   skip - blacklisted (count=%d limit=%d)",
-					blacklist_count, limit);
+					"   skip - BSSID ignored (count=%d limit=%d)",
+					bssid_ignore_count, limit);
 			}
 			return NULL;
 		}
@@ -1558,7 +1559,7 @@
 
 	for (ssid = group; ssid; ssid = only_first_ssid ? NULL : ssid->pnext) {
 		if (wpa_scan_res_ok(wpa_s, ssid, match_ssid, match_ssid_len,
-				    bss, blacklist_count, debug_print))
+				    bss, bssid_ignore_count, debug_print))
 			return ssid;
 	}
 
@@ -1660,12 +1661,12 @@
 				break;
 		}
 
-		if (selected == NULL && wpa_s->blacklist &&
+		if (selected == NULL && wpa_s->bssid_ignore &&
 		    !wpa_s->countermeasures) {
-			wpa_dbg(wpa_s, MSG_DEBUG, "No APs found - clear "
-				"blacklist and try again");
-			wpa_blacklist_clear(wpa_s);
-			wpa_s->blacklist_cleared++;
+			wpa_dbg(wpa_s, MSG_DEBUG,
+				"No APs found - clear BSSID ignore list and try again");
+			wpa_bssid_ignore_clear(wpa_s);
+			wpa_s->bssid_ignore_cleared = true;
 		} else if (selected == NULL)
 			break;
 	}
@@ -1853,7 +1854,7 @@
 				     const struct wpa_bss *bss, int snr)
 {
 	int rate = wpa_bss_get_max_rate(bss);
-	const u8 *ies = (const void *) (bss + 1);
+	const u8 *ies = wpa_bss_ie_ptr(bss);
 	size_t ie_len = bss->ie_len ? bss->ie_len : bss->beacon_ie_len;
 
 	return wpas_get_est_tpt(wpa_s, ies, ie_len, rate, snr);
@@ -2092,9 +2093,18 @@
 			return -1;
 		if (data && data->scan_info.external_scan)
 			return -1;
-		wpa_dbg(wpa_s, MSG_DEBUG, "Failed to get scan results - try "
-			"scanning again");
-		wpa_supplicant_req_new_scan(wpa_s, 1, 0);
+		if (wpa_s->scan_res_fail_handler) {
+			void (*handler)(struct wpa_supplicant *wpa_s);
+
+			handler = wpa_s->scan_res_fail_handler;
+			wpa_s->scan_res_fail_handler = NULL;
+			handler(wpa_s);
+		} else {
+			wpa_dbg(wpa_s, MSG_DEBUG,
+				"Failed to get scan results - try scanning again");
+			wpa_supplicant_req_new_scan(wpa_s, 1, 0);
+		}
+
 		ret = -1;
 		goto scan_work_done;
 	}
@@ -2441,7 +2451,7 @@
 
 	os_get_reltime(&now);
 	if (os_reltime_expired(&now, &wpa_s->last_scan,
-			       SCAN_RES_VALID_FOR_CONNECT)) {
+			       wpa_s->conf->scan_res_valid_for_connect)) {
 		wpa_printf(MSG_DEBUG, "Fast associate: Old scan results");
 		return -1;
 	}
@@ -3063,7 +3073,7 @@
 	if (!bss)
 		return;
 
-	ieprb = (const u8 *) (bss + 1);
+	ieprb = wpa_bss_ie_ptr(bss);
 	iebcn = ieprb + bss->ie_len;
 
 	if (!wpas_fst_update_mbie(wpa_s, ieprb, bss->ie_len))
@@ -3540,6 +3550,8 @@
 	if (wpa_s->wpa_state >= WPA_AUTHENTICATING)
 		wpas_connection_failed(wpa_s, bssid);
 	wpa_sm_notify_disassoc(wpa_s->wpa);
+	ptksa_cache_flush(wpa_s->ptksa, wpa_s->bssid, WPA_CIPHER_NONE);
+
 	if (locally_generated)
 		wpa_s->disconnect_reason = -reason_code;
 	else
@@ -3633,7 +3645,7 @@
 		/* initialize countermeasures */
 		wpa_s->countermeasures = 1;
 
-		wpa_blacklist_add(wpa_s, wpa_s->bssid);
+		wpa_bssid_ignore_add(wpa_s, wpa_s->bssid);
 
 		wpa_msg(wpa_s, MSG_WARNING, "TKIP countermeasures started");
 
@@ -4492,6 +4504,31 @@
 }
 
 
+static const char * connect_fail_reason(enum sta_connect_fail_reason_codes code)
+{
+	switch (code) {
+	case STA_CONNECT_FAIL_REASON_UNSPECIFIED:
+		return "";
+	case STA_CONNECT_FAIL_REASON_NO_BSS_FOUND:
+		return "no_bss_found";
+	case STA_CONNECT_FAIL_REASON_AUTH_TX_FAIL:
+		return "auth_tx_fail";
+	case STA_CONNECT_FAIL_REASON_AUTH_NO_ACK_RECEIVED:
+		return "auth_no_ack_received";
+	case STA_CONNECT_FAIL_REASON_AUTH_NO_RESP_RECEIVED:
+		return "auth_no_resp_received";
+	case STA_CONNECT_FAIL_REASON_ASSOC_REQ_TX_FAIL:
+		return "assoc_req_tx_fail";
+	case STA_CONNECT_FAIL_REASON_ASSOC_NO_ACK_RECEIVED:
+		return "assoc_no_ack_received";
+	case STA_CONNECT_FAIL_REASON_ASSOC_NO_RESP_RECEIVED:
+		return "assoc_no_resp_received";
+	default:
+		return "unknown_reason";
+	}
+}
+
+
 static void wpas_event_assoc_reject(struct wpa_supplicant *wpa_s,
 				    union wpa_event_data *data)
 {
@@ -4511,21 +4548,29 @@
 
 	if (data->assoc_reject.bssid)
 		wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_ASSOC_REJECT
-			"bssid=" MACSTR	" status_code=%u%s%s%s",
+			"bssid=" MACSTR	" status_code=%u%s%s%s%s%s",
 			MAC2STR(data->assoc_reject.bssid),
 			data->assoc_reject.status_code,
 			data->assoc_reject.timed_out ? " timeout" : "",
 			data->assoc_reject.timeout_reason ? "=" : "",
 			data->assoc_reject.timeout_reason ?
-			data->assoc_reject.timeout_reason : "");
+			data->assoc_reject.timeout_reason : "",
+			data->assoc_reject.reason_code !=
+			STA_CONNECT_FAIL_REASON_UNSPECIFIED ?
+			" qca_driver_reason=" : "",
+			connect_fail_reason(data->assoc_reject.reason_code));
 	else
 		wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_ASSOC_REJECT
-			"status_code=%u%s%s%s",
+			"status_code=%u%s%s%s%s%s",
 			data->assoc_reject.status_code,
 			data->assoc_reject.timed_out ? " timeout" : "",
 			data->assoc_reject.timeout_reason ? "=" : "",
 			data->assoc_reject.timeout_reason ?
-			data->assoc_reject.timeout_reason : "");
+			data->assoc_reject.timeout_reason : "",
+			data->assoc_reject.reason_code !=
+			STA_CONNECT_FAIL_REASON_UNSPECIFIED ?
+			" qca_driver_reason=" : "",
+			connect_fail_reason(data->assoc_reject.reason_code));
 	wpa_s->assoc_status_code = data->assoc_reject.status_code;
 	wpas_notify_assoc_status_code(wpa_s, bssid, data->assoc_reject.timed_out,
 				    data->assoc_reject.resp_ies, data->assoc_reject.resp_ies_len);
@@ -4815,7 +4860,7 @@
 			}
 		} else {
 			wpa_dbg(wpa_s, MSG_DEBUG, "External program started a scan");
-			wpa_s->radio->external_scan_running = 1;
+			wpa_s->radio->external_scan_req_interface = wpa_s;
 			wpa_msg_ctrl(wpa_s, MSG_INFO, WPA_EVENT_SCAN_STARTED);
 		}
 		break;
@@ -4823,7 +4868,7 @@
 		if (wpa_s->wpa_state == WPA_INTERFACE_DISABLED) {
 			wpa_s->scan_res_handler = NULL;
 			wpa_s->own_scan_running = 0;
-			wpa_s->radio->external_scan_running = 0;
+			wpa_s->radio->external_scan_req_interface = NULL;
 			wpa_s->last_scan_req = NORMAL_SCAN_REQ;
 			break;
 		}
@@ -4843,7 +4888,7 @@
 		if (!(data && data->scan_info.external_scan))
 			wpa_s->own_scan_running = 0;
 		if (data && data->scan_info.nl_scan_event)
-			wpa_s->radio->external_scan_running = 0;
+			wpa_s->radio->external_scan_req_interface = NULL;
 		radio_work_check_next(wpa_s);
 		break;
 #endif /* CONFIG_NO_SCAN_PROCESSING */
@@ -4906,6 +4951,14 @@
 			" type=%d stype=%d",
 			MAC2STR(data->tx_status.dst),
 			data->tx_status.type, data->tx_status.stype);
+#ifdef CONFIG_PASN
+		if (data->tx_status.type == WLAN_FC_TYPE_MGMT &&
+		    data->tx_status.stype == WLAN_FC_STYPE_AUTH &&
+		    wpas_pasn_auth_tx_status(wpa_s, data->tx_status.data,
+					     data->tx_status.data_len,
+					     data->tx_status.ack) == 0)
+			break;
+#endif /* CONFIG_PASN */
 #ifdef CONFIG_AP
 		if (wpa_s->ap_iface == NULL) {
 #ifdef CONFIG_OFFCHANNEL
@@ -5001,6 +5054,12 @@
 
 		wpa_s->assoc_freq = data->ch_switch.freq;
 		wpa_s->current_ssid->frequency = data->ch_switch.freq;
+		if (wpa_s->current_bss &&
+		    wpa_s->current_bss->freq != data->ch_switch.freq) {
+			wpa_s->current_bss->freq = data->ch_switch.freq;
+			notify_bss_changes(wpa_s, WPA_BSS_FREQ_CHANGED_FLAG,
+					   wpa_s->current_bss);
+		}
 
 #ifdef CONFIG_SME
 		switch (data->ch_switch.ch_offset) {
@@ -5134,6 +5193,12 @@
 				mesh_mpm_mgmt_rx(wpa_s, &data->rx_mgmt);
 				break;
 			}
+#ifdef CONFIG_PASN
+			if (stype == WLAN_FC_STYPE_AUTH &&
+			    wpas_pasn_auth_rx(wpa_s, mgmt,
+					      data->rx_mgmt.frame_len) != -2)
+				break;
+#endif /* CONFIG_PASN */
 
 #ifdef CONFIG_SAE
 			if (stype == WLAN_FC_STYPE_AUTH &&
@@ -5316,13 +5381,13 @@
 		}
 		wpa_supplicant_mark_disassoc(wpa_s);
 		os_reltime_age(&wpa_s->last_scan, &age);
-		if (age.sec >= SCAN_RES_VALID_FOR_CONNECT) {
-			clear_at.sec = SCAN_RES_VALID_FOR_CONNECT;
+		if (age.sec >= wpa_s->conf->scan_res_valid_for_connect) {
+			clear_at.sec = wpa_s->conf->scan_res_valid_for_connect;
 			clear_at.usec = 0;
 		} else {
 			struct os_reltime tmp;
 
-			tmp.sec = SCAN_RES_VALID_FOR_CONNECT;
+			tmp.sec = wpa_s->conf->scan_res_valid_for_connect;
 			tmp.usec = 0;
 			os_reltime_sub(&tmp, &age, &clear_at);
 		}
diff --git a/wpa_supplicant/examples/p2p-action-udhcp.sh b/wpa_supplicant/examples/p2p-action-udhcp.sh
index d7d0e79..53d8b77 100755
--- a/wpa_supplicant/examples/p2p-action-udhcp.sh
+++ b/wpa_supplicant/examples/p2p-action-udhcp.sh
@@ -50,7 +50,7 @@
 if [ "$CMD" = "P2P-CROSS-CONNECT-ENABLE" ]; then
     GIFNAME=$3
     UPLINK=$4
-    # enable NAT/masquarade $GIFNAME -> $UPLINK
+    # enable NAT/masquerade $GIFNAME -> $UPLINK
     iptables -P FORWARD DROP
     iptables -t nat -A POSTROUTING -o $UPLINK -j MASQUERADE
     iptables -A FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
@@ -61,7 +61,7 @@
 if [ "$CMD" = "P2P-CROSS-CONNECT-DISABLE" ]; then
     GIFNAME=$3
     UPLINK=$4
-    # disable NAT/masquarade $GIFNAME -> $UPLINK
+    # disable NAT/masquerade $GIFNAME -> $UPLINK
     sysctl net.ipv4.ip_forward=0
     iptables -t nat -D POSTROUTING -o $UPLINK -j MASQUERADE
     iptables -D FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
diff --git a/wpa_supplicant/examples/p2p-action.sh b/wpa_supplicant/examples/p2p-action.sh
index 797d43a..6c27b27 100755
--- a/wpa_supplicant/examples/p2p-action.sh
+++ b/wpa_supplicant/examples/p2p-action.sh
@@ -77,7 +77,7 @@
 if [ "$CMD" = "P2P-CROSS-CONNECT-ENABLE" ]; then
     GIFNAME=$3
     UPLINK=$4
-    # enable NAT/masquarade $GIFNAME -> $UPLINK
+    # enable NAT/masquerade $GIFNAME -> $UPLINK
     iptables -P FORWARD DROP
     iptables -t nat -A POSTROUTING -o $UPLINK -j MASQUERADE
     iptables -A FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
@@ -88,7 +88,7 @@
 if [ "$CMD" = "P2P-CROSS-CONNECT-DISABLE" ]; then
     GIFNAME=$3
     UPLINK=$4
-    # disable NAT/masquarade $GIFNAME -> $UPLINK
+    # disable NAT/masquerade $GIFNAME -> $UPLINK
     sysctl net.ipv4.ip_forward=0
     iptables -t nat -D POSTROUTING -o $UPLINK -j MASQUERADE
     iptables -D FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
diff --git a/wpa_supplicant/examples/p2p/p2p_connect.py b/wpa_supplicant/examples/p2p/p2p_connect.py
index 2f62e9c..bfb5533 100644
--- a/wpa_supplicant/examples/p2p/p2p_connect.py
+++ b/wpa_supplicant/examples/p2p/p2p_connect.py
@@ -71,7 +71,7 @@
 	global wpas_dbus_interfaces_interface
 	global wpas_dbus_interfaces_p2pdevice
 
-	# Dictionary of Arguements
+	# Dictionary of Arguments
 	global p2p_connect_arguements
 
 	# Constructor
@@ -146,9 +146,9 @@
 			signal_name="WpsFailed")
 
 
-	#Constructing all the arguements needed to connect
+	#Constructing all the arguments needed to connect
 	def constructArguements(self):
-		# Adding required arguements
+		# Adding required arguments
 		self.p2p_connect_arguements = {'wps_method':self.wps_method,
 			'peer':dbus.ObjectPath(self.path+'/Peers/'+self.addr)}
 
@@ -198,7 +198,7 @@
 			usage()
 			quit()
 
-		# Go_intent is optional for all arguements
+		# Go_intent is optional for all arguments
 		if (self.go_intent != None):
 			self.p2p_connect_arguements.update(
 				{'go_intent':dbus.Int32(self.go_intent)})
@@ -239,7 +239,7 @@
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
@@ -266,9 +266,9 @@
 		else:
 			assert False, "unhandled option"
 
-	# Required Arguements check
+	# Required Arguments check
 	if (interface_name == None or wps_method == None or addr == None):
-		print("Error:\n  Required arguements not specified")
+		print("Error:\n  Required arguments not specified")
 		usage()
 		quit()
 
@@ -289,7 +289,7 @@
 			addr,pin,wps_method,go_intent)
 
 	except:
-		print("Error:\n  Invalid Arguements")
+		print("Error:\n  Invalid Arguments")
 		usage()
 		quit()
 
diff --git a/wpa_supplicant/examples/p2p/p2p_disconnect.py b/wpa_supplicant/examples/p2p/p2p_disconnect.py
index 85b5a8b..f04b98e 100644
--- a/wpa_supplicant/examples/p2p/p2p_disconnect.py
+++ b/wpa_supplicant/examples/p2p/p2p_disconnect.py
@@ -125,7 +125,7 @@
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
diff --git a/wpa_supplicant/examples/p2p/p2p_find.py b/wpa_supplicant/examples/p2p/p2p_find.py
index e2df528..412d812 100644
--- a/wpa_supplicant/examples/p2p/p2p_find.py
+++ b/wpa_supplicant/examples/p2p/p2p_find.py
@@ -136,7 +136,7 @@
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
diff --git a/wpa_supplicant/examples/p2p/p2p_flush.py b/wpa_supplicant/examples/p2p/p2p_flush.py
index 42fc7a3..5cc3a0e 100644
--- a/wpa_supplicant/examples/p2p/p2p_flush.py
+++ b/wpa_supplicant/examples/p2p/p2p_flush.py
@@ -125,7 +125,7 @@
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
diff --git a/wpa_supplicant/examples/p2p/p2p_group_add.py b/wpa_supplicant/examples/p2p/p2p_group_add.py
index 6d40821..db6d60d 100644
--- a/wpa_supplicant/examples/p2p/p2p_group_add.py
+++ b/wpa_supplicant/examples/p2p/p2p_group_add.py
@@ -18,7 +18,7 @@
 	print("  		[-w <wpas_dbus_interface>]")
 	print("Options:")
 	print("  -i = interface name")
-	print("  -p = persistant group = 0 (0=false, 1=true)")
+	print("  -p = persistent group = 0 (0=false, 1=true)")
 	print("  -f = frequency")
 	print("  -o = persistent group object path")
 	print("  -w = wpas dbus interface = fi.w1.wpa_supplicant1")
@@ -57,7 +57,7 @@
 	global wpas_dbus_interfaces_interface
 	global wpas_dbus_interfaces_p2pdevice
 
-	# Arguements
+	# Arguments
 	global P2PDictionary
 
 	# Constructor
@@ -120,7 +120,7 @@
 			signal_name="WpsFailed")
 
 		# Sets up p2p_group_add dictionary
-	def constructArguements(self):
+	def constructArguments(self):
 		self.P2PDictionary = {'persistent':self.persistent}
 
 		if (self.frequency != None):
@@ -141,7 +141,7 @@
 			self.p2p_interface.GroupAdd(self.P2PDictionary)
 
 		except:
-			print("Error:\n  Could not preform group add")
+			print("Error:\n  Could not perform group add")
 			usage()
 			os._exit(0)
 
@@ -172,7 +172,7 @@
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
@@ -213,9 +213,9 @@
 		p2p_group_add_test = P2P_Group_Add(interface_name,wpas_dbus_interface,
 					persistent,frequency,persistent_group_object)
 	except:
-		print("Error:\n  Invalid Arguements")
+		print("Error:\n  Invalid Arguments")
 
-	p2p_group_add_test.constructArguements()
+	p2p_group_add_test.constructArguments()
 	p2p_group_add_test.start()
 	time.sleep(5)
 	print("Error:\n  Group formation timed out")
diff --git a/wpa_supplicant/examples/p2p/p2p_invite.py b/wpa_supplicant/examples/p2p/p2p_invite.py
index 341dcd0..8944e11 100644
--- a/wpa_supplicant/examples/p2p/p2p_invite.py
+++ b/wpa_supplicant/examples/p2p/p2p_invite.py
@@ -25,7 +25,7 @@
 
 # Required Signals
 def InvitationResult(invite_result):
-	print("Inviation Result signal :")
+	print("Invitation Result signal :")
 	status = invite_result['status']
 	print("status = ", status)
 	if invite_result.has_key('BSSID'):
@@ -55,7 +55,7 @@
 	global wpas_dbus_interfaces_interface
 	global wpas_dbus_interfaces_p2pdevice
 
-	# Arguements
+	# Arguments
 	global P2PDictionary
 
 	# Constructor
@@ -127,7 +127,7 @@
 			self.p2p_interface.Invite(self.P2PDictionary)
 
 		except:
-			print("Error:\n  Invalid Arguements")
+			print("Error:\n  Invalid Arguments")
 			usage()
 			os._exit(0)
 
@@ -154,7 +154,7 @@
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
@@ -190,7 +190,7 @@
 			P2P_Invite(interface_name,wpas_dbus_interface,
 					addr,persistent_group_object)
 	except:
-		print("Error:\n  Invalid Arguements")
+		print("Error:\n  Invalid Arguments")
 		usage()
 		os._exit(1)
 
diff --git a/wpa_supplicant/examples/p2p/p2p_listen.py b/wpa_supplicant/examples/p2p/p2p_listen.py
index b0837d9..cbeda9f 100644
--- a/wpa_supplicant/examples/p2p/p2p_listen.py
+++ b/wpa_supplicant/examples/p2p/p2p_listen.py
@@ -126,7 +126,7 @@
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
diff --git a/wpa_supplicant/examples/p2p/p2p_stop_find.py b/wpa_supplicant/examples/p2p/p2p_stop_find.py
index bdb4c0e..f367196 100644
--- a/wpa_supplicant/examples/p2p/p2p_stop_find.py
+++ b/wpa_supplicant/examples/p2p/p2p_stop_find.py
@@ -130,7 +130,7 @@
 		usage()
 		quit()
 
-	# If theres a switch, override default option
+	# If there's a switch, override default option
 	for key, value in options:
 		# Help
 		if (key == "-h"):
diff --git a/wpa_supplicant/examples/udhcpd-p2p.conf b/wpa_supplicant/examples/udhcpd-p2p.conf
index df59094..f92cc61 100644
--- a/wpa_supplicant/examples/udhcpd-p2p.conf
+++ b/wpa_supplicant/examples/udhcpd-p2p.conf
@@ -11,8 +11,8 @@
 interface	wlan2		#default: eth0
 
 
-# The maximim number of leases (includes addressesd reserved
-# by OFFER's, DECLINE's, and ARP conficts
+# The maximum number of leases (includes addresses reserved
+# by OFFER's, DECLINE's, and ARP conflicts)
 
 #max_leases	254		#default: 254
 
@@ -52,12 +52,12 @@
 # If a lease to be given is below this value, the full lease time is
 # instead used (seconds).
 
-#min_lease	60		#defult: 60
+#min_lease	60		#default: 60
 
 
 # The location of the leases file
 
-#lease_file	/var/lib/misc/udhcpd.leases	#defualt: /var/lib/misc/udhcpd.leases
+#lease_file	/var/lib/misc/udhcpd.leases	#default: /var/lib/misc/udhcpd.leases
 
 # The location of the pid file
 pidfile	/var/run/udhcpd-wlan2.pid	#default: /var/run/udhcpd.pid
@@ -77,7 +77,7 @@
 
 #boot_file	/var/nfs_root		#default: (none)
 
-# The remainer of options are DHCP options and can be specifed with the
+# The remainder of options are DHCP options and can be specified with the
 # keyword 'opt' or 'option'. If an option can take multiple items, such
 # as the dns option, they can be listed on the same line, or multiple
 # lines. The only option with a default is 'lease'.
@@ -116,5 +116,3 @@
 # Static leases map
 #static_lease 00:60:08:11:CE:4E 192.168.0.54
 #static_lease 00:60:08:11:CE:3E 192.168.0.44
-
-
diff --git a/wpa_supplicant/hidl/1.4/hidl_manager.cpp b/wpa_supplicant/hidl/1.4/hidl_manager.cpp
index b57988d..b7a7cf7 100644
--- a/wpa_supplicant/hidl/1.4/hidl_manager.cpp
+++ b/wpa_supplicant/hidl/1.4/hidl_manager.cpp
@@ -842,7 +842,7 @@
 		struct wpa_bss_anqp_elem *elem;
 		dl_list_for_each(elem, &anqp->anqp_elems, struct wpa_bss_anqp_elem,
 				 list) {
-			if (elem->infoid == ANQP_VENUE_URL) {
+			if (elem->infoid == ANQP_VENUE_URL && elem->protected_response) {
 				hidl_anqp_data.venueUrl =
 						    misc_utils::convertWpaBufToVector(elem->payload);
 				break;
diff --git a/wpa_supplicant/hs20_supplicant.c b/wpa_supplicant/hs20_supplicant.c
index 907803b..8aeb3b0 100644
--- a/wpa_supplicant/hs20_supplicant.c
+++ b/wpa_supplicant/hs20_supplicant.c
@@ -22,7 +22,7 @@
 #include "scan.h"
 #include "notify.h"
 #include "bss.h"
-#include "blacklist.h"
+#include "bssid_ignore.h"
 #include "gas_query.h"
 #include "interworking.h"
 #include "hs20_supplicant.h"
@@ -906,14 +906,25 @@
 	/* OSU Friendly Name Duples */
 	while (pos - pos2 >= 4 && prov->friendly_name_count < OSU_MAX_ITEMS) {
 		struct osu_lang_string *f;
-		if (1 + pos2[0] > pos - pos2 || pos2[0] < 3) {
+		u8 slen;
+
+		slen = pos2[0];
+		if (1 + slen > pos - pos2) {
 			wpa_printf(MSG_DEBUG, "Invalid OSU Friendly Name");
 			break;
 		}
+		if (slen < 3) {
+			wpa_printf(MSG_DEBUG,
+				   "Invalid OSU Friendly Name (no room for language)");
+			break;
+		}
 		f = &prov->friendly_name[prov->friendly_name_count++];
-		os_memcpy(f->lang, pos2 + 1, 3);
-		os_memcpy(f->text, pos2 + 1 + 3, pos2[0] - 3);
-		pos2 += 1 + pos2[0];
+		pos2++;
+		os_memcpy(f->lang, pos2, 3);
+		pos2 += 3;
+		slen -= 3;
+		os_memcpy(f->text, pos2, slen);
+		pos2 += slen;
 	}
 
 	/* OSU Server URI */
@@ -1295,8 +1306,8 @@
 	wpas_notify_hs20_rx_deauth_imminent_notice(wpa_s, code, reauth_delay, url);
 
 	if (code == HS20_DEAUTH_REASON_CODE_BSS) {
-		wpa_printf(MSG_DEBUG, "HS 2.0: Add BSS to blacklist");
-		wpa_blacklist_add(wpa_s, wpa_s->bssid);
+		wpa_printf(MSG_DEBUG, "HS 2.0: Add BSS to ignore list");
+		wpa_bssid_ignore_add(wpa_s, wpa_s->bssid);
 		/* TODO: For now, disable full ESS since some drivers may not
 		 * support disabling per BSS. */
 		if (wpa_s->current_ssid) {
diff --git a/wpa_supplicant/interworking.c b/wpa_supplicant/interworking.c
index 3946252..b93f2a3 100644
--- a/wpa_supplicant/interworking.c
+++ b/wpa_supplicant/interworking.c
@@ -2482,7 +2482,7 @@
 		bss_load = cred_over_max_bss_load(wpa_s, cred, bss);
 		conn_capab = cred_conn_capab_missing(wpa_s, cred, bss);
 		wpa_msg(wpa_s, MSG_INFO, "%s" MACSTR " type=%s%s%s%s id=%d priority=%d sp_priority=%d",
-			excluded ? INTERWORKING_BLACKLISTED : INTERWORKING_AP,
+			excluded ? INTERWORKING_EXCLUDED : INTERWORKING_AP,
 			MAC2STR(bss->bssid), type,
 			bh ? " below_min_backhaul=1" : "",
 			bss_load ? " over_max_bss_load=1" : "",
@@ -2532,7 +2532,7 @@
 	    (selected_cred == NULL ||
 	     cred_prio_cmp(selected_home_cred, selected_cred) >= 0)) {
 		/* Prefer network operated by the Home SP */
-		wpa_printf(MSG_DEBUG, "Interworking: Overrided selected with selected_home");
+		wpa_printf(MSG_DEBUG, "Interworking: Overrode selected with selected_home");
 		selected = selected_home;
 		selected_cred = selected_home_cred;
 	}
@@ -2793,6 +2793,7 @@
 			wpa_printf(MSG_WARNING,
 				   "ANQP: Cannot send MBO query to unknown BSS "
 				   MACSTR, MAC2STR(dst));
+			wpabuf_free(extra_buf);
 			return -1;
 		}
 
@@ -2831,7 +2832,7 @@
 
 static void anqp_add_extra(struct wpa_supplicant *wpa_s,
 			   struct wpa_bss_anqp *anqp, u16 info_id,
-			   const u8 *data, size_t slen)
+			   const u8 *data, size_t slen, bool protected_response)
 {
 	struct wpa_bss_anqp_elem *tmp, *elem = NULL;
 
@@ -2856,6 +2857,7 @@
 		wpabuf_free(elem->payload);
 	}
 
+	elem->protected_response = protected_response;
 	elem->payload = wpabuf_alloc_copy(data, slen);
 	if (!elem->payload) {
 		dl_list_del(&elem->list);
@@ -2898,6 +2900,7 @@
 	const u8 *pos = data;
 	struct wpa_bss_anqp *anqp = NULL;
 	u8 type;
+	bool protected_response;
 
 	if (bss)
 		anqp = bss->anqp;
@@ -2998,13 +3001,15 @@
 	case ANQP_VENUE_URL:
 		wpa_msg(wpa_s, MSG_INFO, RX_ANQP MACSTR " Venue URL",
 			MAC2STR(sa));
+		protected_response = pmf_in_use(wpa_s, sa);
+		anqp_add_extra(wpa_s, anqp, info_id, pos, slen,
+			       protected_response);
 
-		if (!pmf_in_use(wpa_s, sa)) {
+		if (!protected_response) {
 			wpa_printf(MSG_DEBUG,
 				   "ANQP: Ignore Venue URL since PMF was not enabled");
 			break;
 		}
-		anqp_add_extra(wpa_s, anqp, info_id, pos, slen);
 		interworking_parse_venue_url(wpa_s, pos, slen);
 		break;
 	case ANQP_VENDOR_SPECIFIC:
@@ -3052,7 +3057,8 @@
 	default:
 		wpa_msg(wpa_s, MSG_DEBUG,
 			"Interworking: Unsupported ANQP Info ID %u", info_id);
-		anqp_add_extra(wpa_s, anqp, info_id, data, slen);
+		anqp_add_extra(wpa_s, anqp, info_id, data, slen,
+			       pmf_in_use(wpa_s, sa));
 		break;
 	}
 }
diff --git a/wpa_supplicant/mesh.c b/wpa_supplicant/mesh.c
index 558d87a..901b49b 100644
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
@@ -13,6 +13,7 @@
 #include "utils/uuid.h"
 #include "common/ieee802_11_defs.h"
 #include "common/wpa_ctrl.h"
+#include "common/hw_features_common.h"
 #include "ap/sta_info.h"
 #include "ap/hostapd.h"
 #include "ap/ieee802_11.h"
@@ -27,22 +28,30 @@
 #include "mesh.h"
 
 
-static void wpa_supplicant_mesh_deinit(struct wpa_supplicant *wpa_s)
+static void wpa_supplicant_mesh_deinit(struct wpa_supplicant *wpa_s,
+				       bool also_clear_hostapd)
 {
-	wpa_supplicant_mesh_iface_deinit(wpa_s, wpa_s->ifmsh);
-	wpa_s->ifmsh = NULL;
-	wpa_s->current_ssid = NULL;
+	wpa_supplicant_mesh_iface_deinit(wpa_s, wpa_s->ifmsh,
+					 also_clear_hostapd);
+
+	if (also_clear_hostapd) {
+		wpa_s->ifmsh = NULL;
+		wpa_s->current_ssid = NULL;
+		os_free(wpa_s->mesh_params);
+		wpa_s->mesh_params = NULL;
+	}
+
 	os_free(wpa_s->mesh_rsn);
 	wpa_s->mesh_rsn = NULL;
-	os_free(wpa_s->mesh_params);
-	wpa_s->mesh_params = NULL;
-	/* TODO: leave mesh (stop beacon). This will happen on link down
-	 * anyway, so it's not urgent */
+
+	if (!also_clear_hostapd)
+		wpa_supplicant_leave_mesh(wpa_s, false);
 }
 
 
 void wpa_supplicant_mesh_iface_deinit(struct wpa_supplicant *wpa_s,
-				      struct hostapd_iface *ifmsh)
+				      struct hostapd_iface *ifmsh,
+				      bool also_clear_hostapd)
 {
 	if (!ifmsh)
 		return;
@@ -63,8 +72,10 @@
 	}
 
 	/* take care of shared data */
-	hostapd_interface_deinit(ifmsh);
-	hostapd_interface_free(ifmsh);
+	if (also_clear_hostapd) {
+		hostapd_interface_deinit(ifmsh);
+		hostapd_interface_free(ifmsh);
+	}
 }
 
 
@@ -194,6 +205,40 @@
 }
 
 
+static int wpas_mesh_update_freq_params(struct wpa_supplicant *wpa_s)
+{
+	struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
+	struct hostapd_iface *ifmsh = wpa_s->ifmsh;
+	struct he_capabilities *he_capab = NULL;
+
+	if (ifmsh->current_mode)
+		he_capab = &ifmsh->current_mode->he_capab[IEEE80211_MODE_MESH];
+
+	if (hostapd_set_freq_params(
+		    &params->freq,
+		    ifmsh->conf->hw_mode,
+		    ifmsh->freq,
+		    ifmsh->conf->channel,
+		    ifmsh->conf->enable_edmg,
+		    ifmsh->conf->edmg_channel,
+		    ifmsh->conf->ieee80211n,
+		    ifmsh->conf->ieee80211ac,
+		    ifmsh->conf->ieee80211ax,
+		    ifmsh->conf->secondary_channel,
+		    hostapd_get_oper_chwidth(ifmsh->conf),
+		    hostapd_get_oper_centr_freq_seg0_idx(ifmsh->conf),
+		    hostapd_get_oper_centr_freq_seg1_idx(ifmsh->conf),
+		    ifmsh->conf->vht_capab,
+		    he_capab)) {
+		wpa_printf(MSG_ERROR, "Error updating mesh frequency params");
+		wpa_supplicant_mesh_deinit(wpa_s, true);
+		return -1;
+	}
+
+	return 0;
+}
+
+
 static int wpas_mesh_complete(struct wpa_supplicant *wpa_s)
 {
 	struct hostapd_iface *ifmsh = wpa_s->ifmsh;
@@ -207,12 +252,22 @@
 		return -1;
 	}
 
+	/*
+	 * Update channel configuration if the channel has changed since the
+	 * initial setting, i.e., due to DFS radar detection during CAC.
+	 */
+	if (ifmsh->freq > 0 && ifmsh->freq != params->freq.freq) {
+		wpa_s->assoc_freq = ifmsh->freq;
+		ssid->frequency = ifmsh->freq;
+		if (wpas_mesh_update_freq_params(wpa_s) < 0)
+			return -1;
+	}
+
 	if (ifmsh->mconf->security != MESH_CONF_SEC_NONE &&
 	    wpas_mesh_init_rsn(wpa_s)) {
 		wpa_printf(MSG_ERROR,
 			   "mesh: RSN initialization failed - deinit mesh");
-		wpa_supplicant_mesh_deinit(wpa_s);
-		wpa_drv_leave_mesh(wpa_s);
+		wpa_supplicant_mesh_deinit(wpa_s, false);
 		return -1;
 	}
 
@@ -237,13 +292,90 @@
 	/* hostapd sets the interface down until we associate */
 	wpa_drv_set_operstate(wpa_s, 1);
 
-	if (!ret)
+	if (!ret) {
 		wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
 
+		wpa_msg(wpa_s, MSG_INFO, MESH_GROUP_STARTED "ssid=\"%s\" id=%d",
+			wpa_ssid_txt(ssid->ssid, ssid->ssid_len),
+			ssid->id);
+		wpas_notify_mesh_group_started(wpa_s, ssid);
+	}
+
 	return ret;
 }
 
 
+static void wpas_mesh_complete_cb(void *arg)
+{
+	struct wpa_supplicant *wpa_s = arg;
+
+	wpas_mesh_complete(wpa_s);
+}
+
+
+static int wpa_supplicant_mesh_enable_iface_cb(struct hostapd_iface *ifmsh)
+{
+	struct wpa_supplicant *wpa_s = ifmsh->owner;
+	struct hostapd_data *bss;
+
+	ifmsh->mconf = mesh_config_create(wpa_s, wpa_s->current_ssid);
+
+	bss = ifmsh->bss[0];
+	bss->msg_ctx = wpa_s;
+	os_memcpy(bss->own_addr, wpa_s->own_addr, ETH_ALEN);
+	bss->driver = wpa_s->driver;
+	bss->drv_priv = wpa_s->drv_priv;
+	bss->iface = ifmsh;
+	bss->mesh_sta_free_cb = mesh_mpm_free_sta;
+	bss->setup_complete_cb = wpas_mesh_complete_cb;
+	bss->setup_complete_cb_ctx = wpa_s;
+
+	bss->conf->start_disabled = 1;
+	bss->conf->mesh = MESH_ENABLED;
+	bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;
+
+	if (wpa_drv_init_mesh(wpa_s)) {
+		wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh in driver");
+		return -1;
+	}
+
+	if (hostapd_setup_interface(ifmsh)) {
+		wpa_printf(MSG_ERROR,
+			   "Failed to initialize hostapd interface for mesh");
+		return -1;
+	}
+
+	return 0;
+}
+
+
+static int wpa_supplicant_mesh_disable_iface_cb(struct hostapd_iface *ifmsh)
+{
+	struct wpa_supplicant *wpa_s = ifmsh->owner;
+	size_t j;
+
+	wpa_supplicant_mesh_deinit(wpa_s, false);
+
+#ifdef NEED_AP_MLME
+	for (j = 0; j < ifmsh->num_bss; j++)
+		hostapd_cleanup_cs_params(ifmsh->bss[j]);
+#endif /* NEED_AP_MLME */
+
+	/* Same as hostapd_interface_deinit() without deinitializing control
+	 * interface */
+	for (j = 0; j < ifmsh->num_bss; j++) {
+		struct hostapd_data *hapd = ifmsh->bss[j];
+
+		hostapd_bss_deinit_no_free(hapd);
+		hostapd_free_hapd_data(hapd);
+	}
+
+	hostapd_cleanup_iface_partial(ifmsh);
+
+	return 0;
+}
+
+
 static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s,
 				    struct wpa_ssid *ssid,
 				    struct hostapd_freq_params *freq)
@@ -267,9 +399,12 @@
 	if (!ifmsh)
 		return -ENOMEM;
 
+	ifmsh->owner = wpa_s;
 	ifmsh->drv_flags = wpa_s->drv_flags;
 	ifmsh->drv_flags2 = wpa_s->drv_flags2;
 	ifmsh->num_bss = 1;
+	ifmsh->enable_iface_cb = wpa_supplicant_mesh_enable_iface_cb;
+	ifmsh->disable_iface_cb = wpa_supplicant_mesh_disable_iface_cb;
 	ifmsh->bss = os_calloc(wpa_s->ifmsh->num_bss,
 			       sizeof(struct hostapd_data *));
 	if (!ifmsh->bss)
@@ -285,11 +420,14 @@
 	bss->drv_priv = wpa_s->drv_priv;
 	bss->iface = ifmsh;
 	bss->mesh_sta_free_cb = mesh_mpm_free_sta;
+	bss->setup_complete_cb = wpas_mesh_complete_cb;
+	bss->setup_complete_cb_ctx = wpa_s;
 	frequency = ssid->frequency;
 	if (frequency != freq->freq &&
 	    frequency == freq->freq + freq->sec_channel_offset * 20) {
 		wpa_printf(MSG_DEBUG, "mesh: pri/sec channels switched");
 		frequency = freq->freq;
+		ssid->frequency = frequency;
 	}
 	wpa_s->assoc_freq = frequency;
 	wpa_s->current_ssid = ssid;
@@ -311,6 +449,7 @@
 		conf->country[0] = wpa_s->conf->country[0];
 		conf->country[1] = wpa_s->conf->country[1];
 		conf->country[2] = ' ';
+		wpa_s->mesh_params->handle_dfs = true;
 	}
 
 	bss->iconf = conf;
@@ -401,7 +540,7 @@
 
 	return 0;
 out_free:
-	wpa_supplicant_mesh_deinit(wpa_s);
+	wpa_supplicant_mesh_deinit(wpa_s, true);
 	return -ENOMEM;
 }
 
@@ -449,7 +588,7 @@
 		goto out;
 	}
 
-	wpa_supplicant_mesh_deinit(wpa_s);
+	wpa_supplicant_mesh_deinit(wpa_s, true);
 
 	wpa_s->pairwise_cipher = WPA_CIPHER_NONE;
 	wpa_s->group_cipher = WPA_CIPHER_NONE;
@@ -520,25 +659,25 @@
 	wpa_s->mesh_params = params;
 	if (wpa_supplicant_mesh_init(wpa_s, ssid, &params->freq)) {
 		wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh");
-		wpa_drv_leave_mesh(wpa_s);
+		wpa_supplicant_leave_mesh(wpa_s, true);
 		ret = -1;
 		goto out;
 	}
 
-	ret = wpas_mesh_complete(wpa_s);
 out:
 	return ret;
 }
 
 
-int wpa_supplicant_leave_mesh(struct wpa_supplicant *wpa_s)
+int wpa_supplicant_leave_mesh(struct wpa_supplicant *wpa_s, bool need_deinit)
 {
 	int ret = 0;
 
 	wpa_msg(wpa_s, MSG_INFO, "leaving mesh");
 
 	/* Need to send peering close messages first */
-	wpa_supplicant_mesh_deinit(wpa_s);
+	if (need_deinit)
+		wpa_supplicant_mesh_deinit(wpa_s, true);
 
 	ret = wpa_drv_leave_mesh(wpa_s);
 	if (ret)
diff --git a/wpa_supplicant/mesh.h b/wpa_supplicant/mesh.h
index 7317083..a429e5e 100644
--- a/wpa_supplicant/mesh.h
+++ b/wpa_supplicant/mesh.h
@@ -11,9 +11,11 @@
 
 int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
 			     struct wpa_ssid *ssid);
-int wpa_supplicant_leave_mesh(struct wpa_supplicant *wpa_s);
+int wpa_supplicant_leave_mesh(struct wpa_supplicant *wpa_s,
+			      bool need_deinit);
 void wpa_supplicant_mesh_iface_deinit(struct wpa_supplicant *wpa_s,
-				      struct hostapd_iface *ifmsh);
+				      struct hostapd_iface *ifmsh,
+				      bool also_clear_hostapd);
 int wpas_mesh_scan_result_text(const u8 *ies, size_t ies_len, char *buf,
 			       char *end);
 int wpas_mesh_add_interface(struct wpa_supplicant *wpa_s, char *ifname,
diff --git a/wpa_supplicant/nmake.mak b/wpa_supplicant/nmake.mak
index 80e0ac8..617df03 100644
--- a/wpa_supplicant/nmake.mak
+++ b/wpa_supplicant/nmake.mak
@@ -114,7 +114,7 @@
 	$(OBJDIR)\driver_ndis_.obj \
 	$(OBJDIR)\scan_helpers.obj \
 	$(OBJDIR)\events.obj \
-	$(OBJDIR)\blacklist.obj \
+	$(OBJDIR)\bssid_ignore.obj \
 	$(OBJDIR)\scan.obj \
 	$(OBJDIR)\wpas_glue.obj \
 	$(OBJDIR)\eap_register.obj \
diff --git a/wpa_supplicant/notify.c b/wpa_supplicant/notify.c
index c01a6ee..d62c96d 100644
--- a/wpa_supplicant/notify.c
+++ b/wpa_supplicant/notify.c
@@ -428,6 +428,11 @@
 		wpas_notify_persistent_group_removed(wpa_s, ssid);
 
 	wpas_p2p_network_removed(wpa_s, ssid);
+
+#ifdef CONFIG_PASN
+	if (wpa_s->pasn.ssid == ssid)
+		wpa_s->pasn.ssid = NULL;
+#endif /* CONFIG_PASN */
 }
 
 
diff --git a/wpa_supplicant/op_classes.c b/wpa_supplicant/op_classes.c
index 91e15e7..a0ad0c2 100644
--- a/wpa_supplicant/op_classes.c
+++ b/wpa_supplicant/op_classes.c
@@ -22,10 +22,10 @@
 				       unsigned int *flags)
 {
 	int i;
-	int is_6ghz = op_class >= 131 && op_class <= 136;
+	bool is_6ghz = op_class >= 131 && op_class <= 136;
 
 	for (i = 0; i < mode->num_channels; i++) {
-		int chan_is_6ghz;
+		bool chan_is_6ghz;
 
 		chan_is_6ghz = mode->channels[i].freq >= 5935 &&
 			mode->channels[i].freq <= 7115;
@@ -47,15 +47,15 @@
 }
 
 
-static int get_center_80mhz(struct hostapd_hw_modes *mode, u8 channel)
+static int get_center_80mhz(struct hostapd_hw_modes *mode, u8 channel,
+			    const u8 *center_channels, size_t num_chan)
 {
-	u8 center_channels[] = { 42, 58, 106, 122, 138, 155 };
 	size_t i;
 
 	if (mode->mode != HOSTAPD_MODE_IEEE80211A)
 		return 0;
 
-	for (i = 0; i < ARRAY_SIZE(center_channels); i++) {
+	for (i = 0; i < num_chan; i++) {
 		/*
 		 * In 80 MHz, the bandwidth "spans" 12 channels (e.g., 36-48),
 		 * so the center channel is 6 channels away from the start/end.
@@ -75,8 +75,22 @@
 	u8 center_chan;
 	unsigned int i;
 	unsigned int no_ir = 0;
+	const u8 *center_channels;
+	size_t num_chan;
+	const u8 center_channels_5ghz[] = { 42, 58, 106, 122, 138, 155, 171 };
+	const u8 center_channels_6ghz[] = { 7, 23, 39, 55, 71, 87, 103, 119,
+					    135, 151, 167, 183, 199, 215 };
 
-	center_chan = get_center_80mhz(mode, channel);
+	if (is_6ghz_op_class(op_class)) {
+		center_channels = center_channels_6ghz;
+		num_chan = ARRAY_SIZE(center_channels_6ghz);
+	} else {
+		center_channels = center_channels_5ghz;
+		num_chan = ARRAY_SIZE(center_channels_5ghz);
+	}
+
+	center_chan = get_center_80mhz(mode, channel, center_channels,
+				       num_chan);
 	if (!center_chan)
 		return NOT_ALLOWED;
 
@@ -106,15 +120,15 @@
 }
 
 
-static int get_center_160mhz(struct hostapd_hw_modes *mode, u8 channel)
+static int get_center_160mhz(struct hostapd_hw_modes *mode, u8 channel,
+			     const u8 *center_channels, size_t num_chan)
 {
-	u8 center_channels[] = { 50, 114 };
 	unsigned int i;
 
 	if (mode->mode != HOSTAPD_MODE_IEEE80211A)
 		return 0;
 
-	for (i = 0; i < ARRAY_SIZE(center_channels); i++) {
+	for (i = 0; i < num_chan; i++) {
 		/*
 		 * In 160 MHz, the bandwidth "spans" 28 channels (e.g., 36-64),
 		 * so the center channel is 14 channels away from the start/end.
@@ -134,8 +148,21 @@
 	u8 center_chan;
 	unsigned int i;
 	unsigned int no_ir = 0;
+	const u8 *center_channels;
+	size_t num_chan;
+	const u8 center_channels_5ghz[] = { 50, 114, 163 };
+	const u8 center_channels_6ghz[] = { 15, 47, 79, 111, 143, 175, 207 };
 
-	center_chan = get_center_160mhz(mode, channel);
+	if (is_6ghz_op_class(op_class)) {
+		center_channels = center_channels_6ghz;
+		num_chan = ARRAY_SIZE(center_channels_6ghz);
+	} else {
+		center_channels = center_channels_5ghz;
+		num_chan = ARRAY_SIZE(center_channels_5ghz);
+	}
+
+	center_chan = get_center_160mhz(mode, channel, center_channels,
+					num_chan);
 	if (!center_chan)
 		return NOT_ALLOWED;
 
@@ -176,11 +203,12 @@
 	enum chan_allowed res, res2;
 
 	res2 = res = allow_channel(mode, op_class, channel, &flag);
-	if (bw == BW40MINUS) {
+	if (bw == BW40MINUS || (bw == BW40 && (((channel - 1) / 4) % 2))) {
 		if (!(flag & HOSTAPD_CHAN_HT40MINUS))
 			return NOT_ALLOWED;
 		res2 = allow_channel(mode, op_class, channel - 4, NULL);
-	} else if (bw == BW40PLUS) {
+	} else if (bw == BW40PLUS ||
+		   (bw == BW40 && !(((channel - 1) / 4) % 2))) {
 		if (!(flag & HOSTAPD_CHAN_HT40PLUS))
 			return NOT_ALLOWED;
 		res2 = allow_channel(mode, op_class, channel + 4, NULL);
@@ -292,7 +320,7 @@
 #endif /* CONFIG_VHT_OVERRIDES */
 
 	if (op_class->op_class == 128) {
-		u8 channels[] = { 42, 58, 106, 122, 138, 155 };
+		u8 channels[] = { 42, 58, 106, 122, 138, 155, 171 };
 
 		for (i = 0; i < ARRAY_SIZE(channels); i++) {
 			if (verify_channel(mode, op_class->op_class,
@@ -309,6 +337,8 @@
 		return verify_channel(mode, op_class->op_class, 50,
 				      op_class->bw) != NOT_ALLOWED ||
 			verify_channel(mode, op_class->op_class, 114,
+				       op_class->bw) != NOT_ALLOWED ||
+			verify_channel(mode, op_class->op_class, 163,
 				       op_class->bw) != NOT_ALLOWED;
 	}
 
@@ -326,6 +356,10 @@
 		    verify_channel(mode, op_class->op_class, 122,
 				   op_class->bw) != NOT_ALLOWED ||
 		    verify_channel(mode, op_class->op_class, 138,
+				   op_class->bw) != NOT_ALLOWED ||
+		    verify_channel(mode, op_class->op_class, 155,
+				   op_class->bw) != NOT_ALLOWED ||
+		    verify_channel(mode, op_class->op_class, 171,
 				   op_class->bw) != NOT_ALLOWED)
 			found++;
 		if (verify_channel(mode, op_class->op_class, 106,
@@ -333,7 +367,14 @@
 		    verify_channel(mode, op_class->op_class, 138,
 				   op_class->bw) != NOT_ALLOWED)
 			found++;
-		if (verify_channel(mode, op_class->op_class, 155,
+		if (verify_channel(mode, op_class->op_class, 122,
+				   op_class->bw) != NOT_ALLOWED &&
+		    verify_channel(mode, op_class->op_class, 155,
+				   op_class->bw) != NOT_ALLOWED)
+			found++;
+		if (verify_channel(mode, op_class->op_class, 138,
+				   op_class->bw) != NOT_ALLOWED &&
+		    verify_channel(mode, op_class->op_class, 171,
 				   op_class->bw) != NOT_ALLOWED)
 			found++;
 
@@ -343,6 +384,41 @@
 		return 0;
 	}
 
+	if (op_class->op_class == 135) {
+		/* Need at least two 80 MHz segments which do not fall under the
+		 * same 160 MHz segment to support 80+80 in 6 GHz.
+		 */
+		int first_seg = 0;
+		int curr_seg = 0;
+
+		for (chan = op_class->min_chan; chan <= op_class->max_chan;
+		     chan += op_class->inc) {
+			curr_seg++;
+			if (verify_channel(mode, op_class->op_class, chan,
+					   op_class->bw) != NOT_ALLOWED) {
+				if (!first_seg) {
+					first_seg = curr_seg;
+					continue;
+				}
+
+				/* Supported if at least two non-consecutive 80
+				 * MHz segments allowed.
+				 */
+				if ((curr_seg - first_seg) > 1)
+					return 1;
+
+				/* Supported even if the 80 MHz segments are
+				 * consecutive when they do not fall under the
+				 * same 160 MHz segment.
+				 */
+				if ((first_seg % 2) == 0)
+					return 1;
+			}
+		}
+
+		return 0;
+	}
+
 	found = 0;
 	for (chan = op_class->min_chan; chan <= op_class->max_chan;
 	     chan += op_class->inc) {
@@ -361,12 +437,13 @@
 					     u8 *channel)
 {
 
-	u8 *ies, phy_type;
+	const u8 *ies;
+	u8 phy_type;
 	size_t ies_len;
 
 	if (!bss)
 		return -1;
-	ies = (u8 *) (bss + 1);
+	ies = wpa_bss_ie_ptr(bss);
 	ies_len = bss->ie_len ? bss->ie_len : bss->beacon_ie_len;
 	return wpas_get_op_chan_phy(bss->freq, ies, ies_len, current,
 				    channel, &phy_type);
diff --git a/wpa_supplicant/p2p_supplicant.c b/wpa_supplicant/p2p_supplicant.c
index dc5c16d..45c8744 100644
--- a/wpa_supplicant/p2p_supplicant.c
+++ b/wpa_supplicant/p2p_supplicant.c
@@ -242,6 +242,22 @@
 }
 
 
+static void wpas_p2p_scan_res_handled(struct wpa_supplicant *wpa_s)
+{
+	unsigned int delay = wpas_p2p_search_delay(wpa_s);
+
+	/* In case of concurrent P2P and external scans, delay P2P search. */
+	if (external_scan_running(wpa_s->radio)) {
+		delay = wpa_s->conf->p2p_search_delay;
+		wpa_printf(MSG_DEBUG,
+			   "P2P: Delay next P2P search by %d ms to let externally triggered scan complete",
+			   delay);
+	}
+
+	p2p_scan_res_handled(wpa_s->global->p2p, delay);
+}
+
+
 static void wpas_p2p_scan_res_handler(struct wpa_supplicant *wpa_s,
 				      struct wpa_scan_results *scan_res)
 {
@@ -287,42 +303,25 @@
 			break;
 	}
 
-	p2p_scan_res_handled(wpa_s->global->p2p);
+	wpas_p2p_scan_res_handled(wpa_s);
 }
 
 
-static int wpas_p2p_add_scan_freq_list(struct wpa_supplicant *wpa_s,
-				       enum hostapd_hw_mode band,
-				       struct wpa_driver_scan_params *params)
+static void wpas_p2p_scan_res_fail_handler(struct wpa_supplicant *wpa_s)
 {
-	struct hostapd_hw_modes *mode;
-	int num_chans = 0;
-	int *freqs, i;
+	if (wpa_s->p2p_scan_work) {
+		struct wpa_radio_work *work = wpa_s->p2p_scan_work;
 
-	mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, band, 0);
-	if (!mode)
-		return -1;
-
-	if (params->freqs) {
-		while (params->freqs[num_chans])
-			num_chans++;
+		wpa_s->p2p_scan_work = NULL;
+		radio_work_done(work);
 	}
 
-	freqs = os_realloc(params->freqs,
-			   (num_chans + mode->num_channels + 1) * sizeof(int));
-	if (!freqs)
-		return -1;
+	if (wpa_s->global->p2p_disabled || !wpa_s->global->p2p)
+		return;
 
-	params->freqs = freqs;
-
-	for (i = 0; i < mode->num_channels; i++) {
-		if (mode->channels[i].flag & HOSTAPD_CHAN_DISABLED)
-			continue;
-		params->freqs[num_chans++] = mode->channels[i].freq;
-	}
-	params->freqs[num_chans] = 0;
-
-	return 0;
+	wpa_dbg(wpa_s, MSG_DEBUG,
+		"P2P: Failed to get scan results - try to continue");
+	wpas_p2p_scan_res_handled(wpa_s);
 }
 
 
@@ -351,10 +350,10 @@
 	if (wpa_s->conf->p2p_6ghz_disable && !params->freqs) {
 		wpa_printf(MSG_DEBUG,
 			   "P2P: 6 GHz disabled - update the scan frequency list");
-		wpas_p2p_add_scan_freq_list(wpa_s, HOSTAPD_MODE_IEEE80211G,
-					    params);
-		wpas_p2p_add_scan_freq_list(wpa_s, HOSTAPD_MODE_IEEE80211A,
-					    params);
+		wpa_add_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211G, params,
+					0);
+		wpa_add_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211A, params,
+					0);
 	}
 	ret = wpa_drv_scan(wpa_s, params);
 	if (ret == 0)
@@ -370,6 +369,7 @@
 	p2p_notify_scan_trigger_status(wpa_s->global->p2p, ret);
 	os_get_reltime(&wpa_s->scan_trigger_time);
 	wpa_s->scan_res_handler = wpas_p2p_scan_res_handler;
+	wpa_s->scan_res_fail_handler = wpas_p2p_scan_res_fail_handler;
 	wpa_s->own_scan_requested = 1;
 	wpa_s->clear_driver_scan_cache = 0;
 	wpa_s->p2p_scan_work = work;
@@ -1107,9 +1107,9 @@
 			   "group is persistent - BSS " MACSTR
 			   " did not include P2P IE", MAC2STR(bssid));
 		wpa_hexdump(MSG_DEBUG, "P2P: Probe Response IEs",
-			    (u8 *) (bss + 1), bss->ie_len);
+			    wpa_bss_ie_ptr(bss), bss->ie_len);
 		wpa_hexdump(MSG_DEBUG, "P2P: Beacon IEs",
-			    ((u8 *) bss + 1) + bss->ie_len,
+			    wpa_bss_ie_ptr(bss) + bss->ie_len,
 			    bss->beacon_ie_len);
 		return 0;
 	}
@@ -1956,7 +1956,7 @@
 		return -1;
 
 	hwmode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes,
-			  HOSTAPD_MODE_IEEE80211AD, 0);
+			  HOSTAPD_MODE_IEEE80211AD, false);
 	if (!hwmode) {
 		wpa_printf(MSG_ERROR,
 			   "Unsupported AP mode: HOSTAPD_MODE_IEEE80211AD");
@@ -2161,6 +2161,7 @@
 	d->go_internet = s->go_internet;
 	d->go_venue_group = s->go_venue_group;
 	d->go_venue_type = s->go_venue_type;
+	d->p2p_add_cli_chan = s->p2p_add_cli_chan;
 }
 
 
@@ -3587,7 +3588,7 @@
 				     struct hostapd_hw_modes *mode,
 				     u8 channel)
 {
-	u8 center_channels[] = { 42, 58, 106, 122, 138, 155 };
+	u8 center_channels[] = { 42, 58, 106, 122, 138, 155, 171 };
 	size_t i;
 
 	if (mode->mode != HOSTAPD_MODE_IEEE80211A)
@@ -3648,7 +3649,7 @@
 				     struct hostapd_hw_modes *mode,
 				     u8 channel)
 {
-	u8 center_channels[] = { 50, 114 };
+	u8 center_channels[] = { 50, 114, 163 };
 	unsigned int i;
 
 	if (mode->mode != HOSTAPD_MODE_IEEE80211A)
@@ -3761,7 +3762,8 @@
 
 static int wpas_p2p_setup_channels(struct wpa_supplicant *wpa_s,
 				   struct p2p_channels *chan,
-				   struct p2p_channels *cli_chan)
+				   struct p2p_channels *cli_chan,
+				   bool p2p_disable_6ghz)
 {
 	struct hostapd_hw_modes *mode;
 	int cla, op, cli_cla;
@@ -3781,8 +3783,7 @@
 		struct p2p_reg_class *reg = NULL, *cli_reg = NULL;
 
 		if (o->p2p == NO_P2P_SUPP ||
-		    (is_6ghz_op_class(o->op_class) &&
-		     wpa_s->conf->p2p_6ghz_disable))
+		    (is_6ghz_op_class(o->op_class) && p2p_disable_6ghz))
 			continue;
 
 		mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, o->mode,
@@ -3796,7 +3797,7 @@
 
 			/* Check for non-continuous jump in channel index
 			 * incrementation */
-			if ((o->op_class == 128 || o->op_class == 130) &&
+			if ((o->op_class >= 128 && o->op_class <= 130) &&
 			    ch < 149 && ch + o->inc > 149)
 				ch = 149;
 
@@ -3989,6 +3990,7 @@
 	char ifname[100];
 	char force_name[100];
 	int ret;
+	const u8 *if_addr = NULL;
 
 	ret = os_snprintf(ifname, sizeof(ifname), P2P_MGMT_DEVICE_PREFIX "%s",
 			  wpa_s->ifname);
@@ -4000,7 +4002,12 @@
 	ifname[IFNAMSIZ - 1] = '\0';
 	force_name[0] = '\0';
 	wpa_s->pending_interface_type = WPA_IF_P2P_DEVICE;
-	ret = wpa_drv_if_add(wpa_s, WPA_IF_P2P_DEVICE, ifname, NULL, NULL,
+
+	if (wpa_s->conf->p2p_device_random_mac_addr == 2 &&
+	    !is_zero_ether_addr(wpa_s->conf->p2p_device_persistent_mac_addr))
+		if_addr = wpa_s->conf->p2p_device_persistent_mac_addr;
+
+	ret = wpa_drv_if_add(wpa_s, WPA_IF_P2P_DEVICE, ifname, if_addr, NULL,
 			     force_name, wpa_s->pending_interface_addr, NULL);
 	if (ret < 0) {
 		wpa_printf(MSG_DEBUG, "P2P: Failed to create P2P Device interface");
@@ -4576,7 +4583,17 @@
 	if (wpa_s->conf->p2p_device_random_mac_addr == 0)
 		return 0;
 
-	if (wpa_s->conf->ssid == NULL) {
+	if (wpa_s->conf->p2p_device_random_mac_addr == 2) {
+		if (is_zero_ether_addr(
+			    wpa_s->conf->p2p_device_persistent_mac_addr) &&
+		    !is_zero_ether_addr(wpa_s->own_addr)) {
+			os_memcpy(wpa_s->conf->p2p_device_persistent_mac_addr,
+				  wpa_s->own_addr, ETH_ALEN);
+		}
+		return 0;
+	}
+
+	if (!wpa_s->conf->ssid) {
 		if (random_mac_addr(addr) < 0) {
 			wpa_msg(wpa_s, MSG_INFO,
 				"Failed to generate random MAC address");
@@ -4676,6 +4693,7 @@
 	p2p.prov_disc_resp_cb = wpas_prov_disc_resp_cb;
 	p2p.p2ps_group_capability = p2ps_group_capability;
 	p2p.get_pref_freq_list = wpas_p2p_get_pref_freq_list;
+	p2p.p2p_6ghz_disable = wpa_s->conf->p2p_6ghz_disable;
 
 	os_memcpy(wpa_s->global->p2p_dev_addr, wpa_s->own_addr, ETH_ALEN);
 	os_memcpy(p2p.dev_addr, wpa_s->global->p2p_dev_addr, ETH_ALEN);
@@ -4689,7 +4707,8 @@
 		p2p.config_methods = wpa_s->wps->config_methods;
 	}
 
-	if (wpas_p2p_setup_channels(wpa_s, &p2p.channels, &p2p.cli_channels)) {
+	if (wpas_p2p_setup_channels(wpa_s, &p2p.channels, &p2p.cli_channels,
+				    p2p.p2p_6ghz_disable)) {
 		wpa_printf(MSG_ERROR,
 			   "P2P: Failed to configure supported channel list");
 		return -1;
@@ -5205,7 +5224,7 @@
 		wpa_printf(MSG_DEBUG, "P2P: Target GO operating frequency "
 			   "from BSS table: %d MHz (SSID %s)", freq,
 			   wpa_ssid_txt(bss->ssid, bss->ssid_len));
-		if (p2p_parse_dev_addr((const u8 *) (bss + 1), bss->ie_len,
+		if (p2p_parse_dev_addr(wpa_bss_ie_ptr(bss), bss->ie_len,
 				       dev_addr) == 0 &&
 		    os_memcmp(wpa_s->pending_join_dev_addr,
 			      wpa_s->pending_join_iface_addr, ETH_ALEN) == 0 &&
@@ -5347,10 +5366,10 @@
 	} else if (wpa_s->conf->p2p_6ghz_disable) {
 		wpa_printf(MSG_DEBUG,
 			   "P2P: 6 GHz disabled - update the scan frequency list");
-		wpas_p2p_add_scan_freq_list(wpa_s, HOSTAPD_MODE_IEEE80211G,
-					    &params);
-		wpas_p2p_add_scan_freq_list(wpa_s, HOSTAPD_MODE_IEEE80211A,
-					    &params);
+		wpa_add_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211G, &params,
+					0);
+		wpa_add_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211A, &params,
+					0);
 	}
 
 	ielen = p2p_scan_ie_buf_len(wpa_s->global->p2p);
@@ -7133,7 +7152,7 @@
 	 * Indicate that results have been processed so that the P2P module can
 	 * continue pending tasks.
 	 */
-	p2p_scan_res_handled(wpa_s->global->p2p);
+	wpas_p2p_scan_res_handled(wpa_s);
 }
 
 
@@ -8048,7 +8067,8 @@
 
 	os_memset(&chan, 0, sizeof(chan));
 	os_memset(&cli_chan, 0, sizeof(cli_chan));
-	if (wpas_p2p_setup_channels(wpa_s, &chan, &cli_chan)) {
+	if (wpas_p2p_setup_channels(wpa_s, &chan, &cli_chan,
+				    is_p2p_6ghz_disabled(wpa_s->global->p2p))) {
 		wpa_printf(MSG_ERROR, "P2P: Failed to update supported "
 			   "channel list");
 		return;
diff --git a/wpa_supplicant/pasn_supplicant.c b/wpa_supplicant/pasn_supplicant.c
new file mode 100644
index 0000000..4f5ac58
--- /dev/null
+++ b/wpa_supplicant/pasn_supplicant.c
@@ -0,0 +1,1509 @@
+/*
+ * wpa_supplicant - PASN processing
+ *
+ * Copyright (C) 2019 Intel Corporation
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#include "includes.h"
+
+#include "common/ieee802_11_defs.h"
+#include "common/ieee802_11_common.h"
+#include "common/dragonfly.h"
+#include "common/ptksa_cache.h"
+#include "utils/eloop.h"
+#include "drivers/driver.h"
+#include "crypto/crypto.h"
+#include "crypto/random.h"
+#include "eap_common/eap_defs.h"
+#include "rsn_supp/wpa.h"
+#include "rsn_supp/pmksa_cache.h"
+#include "wpa_supplicant_i.h"
+#include "driver_i.h"
+#include "bss.h"
+#include "config.h"
+
+static const int dot11RSNAConfigPMKLifetime = 43200;
+
+struct wpa_pasn_auth_work {
+	u8 bssid[ETH_ALEN];
+	int akmp;
+	int cipher;
+	u16 group;
+	int network_id;
+};
+
+
+static void wpas_pasn_auth_work_timeout(void *eloop_ctx, void *timeout_ctx)
+{
+	struct wpa_supplicant *wpa_s = eloop_ctx;
+
+	wpa_printf(MSG_DEBUG, "PASN: Auth work timeout - stopping auth");
+
+	wpas_pasn_auth_stop(wpa_s);
+}
+
+
+static void wpas_pasn_cancel_auth_work(struct wpa_supplicant *wpa_s)
+{
+	wpa_printf(MSG_DEBUG, "PASN: Cancel pasn-start-auth work");
+
+	/* Remove pending/started work */
+	radio_remove_works(wpa_s, "pasn-start-auth", 0);
+}
+
+
+static void wpas_pasn_auth_status(struct wpa_supplicant *wpa_s, const u8 *bssid,
+				  int akmp, int cipher, u8 status)
+{
+	wpa_msg(wpa_s, MSG_INFO,
+		PASN_AUTH_STATUS MACSTR " akmp=%s, status=%u",
+		MAC2STR(bssid), wpa_key_mgmt_txt(akmp, WPA_PROTO_RSN),
+		status);
+}
+
+
+#ifdef CONFIG_SAE
+
+static struct wpabuf * wpas_pasn_wd_sae_commit(struct wpa_supplicant *wpa_s)
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+	struct wpabuf *buf = NULL;
+	const char *password = NULL;
+	int ret;
+
+	if (pasn->ssid) {
+		password = pasn->ssid->sae_password;
+		if (!password)
+			password = pasn->ssid->passphrase;
+	}
+
+	if (!password) {
+		wpa_printf(MSG_DEBUG, "PASN: SAE without a password");
+		return NULL;
+	}
+
+	ret = sae_set_group(&pasn->sae, pasn->group);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to set SAE group");
+		return NULL;
+	}
+
+	/* TODO: SAE H2E */
+	ret = sae_prepare_commit(wpa_s->own_addr, pasn->bssid,
+				 (const u8 *) password, os_strlen(password), 0,
+				 &pasn->sae);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to prepare SAE commit");
+		return NULL;
+	}
+
+	/* Need to add the entire Authentication frame body */
+	buf = wpabuf_alloc(6 + SAE_COMMIT_MAX_LEN);
+	if (!buf) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to allocate SAE buffer");
+		return NULL;
+	}
+
+	wpabuf_put_le16(buf, WLAN_AUTH_SAE);
+	wpabuf_put_le16(buf, 1);
+	wpabuf_put_le16(buf, WLAN_STATUS_SUCCESS);
+
+	sae_write_commit(&pasn->sae, buf, NULL, 0);
+	pasn->sae.state = SAE_COMMITTED;
+
+	return buf;
+}
+
+
+static int wpas_pasn_wd_sae_rx(struct wpa_supplicant *wpa_s, struct wpabuf *wd)
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+	const u8 *data;
+	size_t buf_len;
+	u16 len, res, alg, seq, status;
+	int groups[] = { pasn->group, 0 };
+	int ret;
+
+	if (!wd)
+		return -1;
+
+	data = wpabuf_head_u8(wd);
+	buf_len = wpabuf_len(wd);
+
+	/* first handle the commit message */
+	if (buf_len < 2) {
+		wpa_printf(MSG_DEBUG, "PASN: SAE buffer too short (commit)");
+		return -1;
+	}
+
+	len = WPA_GET_LE16(data);
+	if (len < 6 || buf_len - 2 < len) {
+		wpa_printf(MSG_DEBUG, "PASN: SAE buffer too short for commit");
+		return -1;
+	}
+
+	buf_len -= 2;
+	data += 2;
+
+	alg = WPA_GET_LE16(data);
+	seq = WPA_GET_LE16(data + 2);
+	status = WPA_GET_LE16(data + 4);
+
+	wpa_printf(MSG_DEBUG, "PASN: SAE: commit: alg=%u, seq=%u, status=%u",
+		   alg, seq, status);
+
+	/* TODO: SAE H2E */
+	if (alg != WLAN_AUTH_SAE || seq != 1 || status != WLAN_STATUS_SUCCESS) {
+		wpa_printf(MSG_DEBUG, "PASN: SAE: dropping peer commit");
+		return -1;
+	}
+
+	res = sae_parse_commit(&pasn->sae, data + 6, len - 6, NULL, 0, groups,
+			       0);
+	if (res != WLAN_STATUS_SUCCESS) {
+		wpa_printf(MSG_DEBUG, "PASN: SAE failed parsing commit");
+		return -1;
+	}
+
+	/* Process the commit message and derive the PMK */
+	ret = sae_process_commit(&pasn->sae);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "SAE: Failed to process peer commit");
+		return -1;
+	}
+
+	buf_len -= len;
+	data += len;
+
+	/* Handle the confirm message */
+	if (buf_len < 2) {
+		wpa_printf(MSG_DEBUG, "PASN: SAE buffer too short (confirm)");
+		return -1;
+	}
+
+	len = WPA_GET_LE16(data);
+	if (len < 6 || buf_len - 2 < len) {
+		wpa_printf(MSG_DEBUG, "PASN: SAE buffer too short for confirm");
+		return -1;
+	}
+
+	buf_len -= 2;
+	data += 2;
+
+	alg = WPA_GET_LE16(data);
+	seq = WPA_GET_LE16(data + 2);
+	status = WPA_GET_LE16(data + 4);
+
+	wpa_printf(MSG_DEBUG, "PASN: SAE confirm: alg=%u, seq=%u, status=%u",
+		   alg, seq, status);
+
+	if (alg != WLAN_AUTH_SAE || seq != 2 || status != WLAN_STATUS_SUCCESS) {
+		wpa_printf(MSG_DEBUG, "PASN: Dropping peer SAE confirm");
+		return -1;
+	}
+
+	res = sae_check_confirm(&pasn->sae, data + 6, len - 6);
+	if (res != WLAN_STATUS_SUCCESS) {
+		wpa_printf(MSG_DEBUG, "PASN: SAE failed checking confirm");
+		return -1;
+	}
+
+	wpa_printf(MSG_DEBUG, "PASN: SAE completed successfully");
+	pasn->sae.state = SAE_ACCEPTED;
+
+	return 0;
+}
+
+
+static struct wpabuf * wpas_pasn_wd_sae_confirm(struct wpa_supplicant *wpa_s)
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+	struct wpabuf *buf = NULL;
+
+	/* Need to add the entire authentication frame body */
+	buf = wpabuf_alloc(6 + SAE_CONFIRM_MAX_LEN);
+	if (!buf) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to allocate SAE buffer");
+		return NULL;
+	}
+
+	wpabuf_put_le16(buf, WLAN_AUTH_SAE);
+	wpabuf_put_le16(buf, 2);
+	wpabuf_put_le16(buf, WLAN_STATUS_SUCCESS);
+
+	sae_write_confirm(&pasn->sae, buf);
+	pasn->sae.state = SAE_CONFIRMED;
+
+	return buf;
+}
+
+#endif /* CONFIG_SAE */
+
+
+#ifdef CONFIG_FILS
+
+static struct wpabuf * wpas_pasn_fils_build_auth(struct wpa_supplicant *wpa_s)
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+	struct wpabuf *buf = NULL;
+	struct wpabuf *erp_msg;
+	int ret;
+
+	erp_msg = eapol_sm_build_erp_reauth_start(wpa_s->eapol);
+	if (!erp_msg) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: FILS: ERP EAP-Initiate/Re-auth unavailable");
+		return NULL;
+	}
+
+	if (random_get_bytes(pasn->fils.nonce, FILS_NONCE_LEN) < 0 ||
+	    random_get_bytes(pasn->fils.session, FILS_SESSION_LEN) < 0)
+		goto fail;
+
+	wpa_hexdump(MSG_DEBUG, "PASN: FILS: Nonce", pasn->fils.nonce,
+		    FILS_NONCE_LEN);
+
+	wpa_hexdump(MSG_DEBUG, "PASN: FILS: Session", pasn->fils.session,
+		    FILS_SESSION_LEN);
+
+	buf = wpabuf_alloc(1500);
+	if (!buf)
+		goto fail;
+
+	/* Add the authentication algorithm */
+	wpabuf_put_le16(buf, WLAN_AUTH_FILS_SK);
+
+	/* Authentication Transaction seq# */
+	wpabuf_put_le16(buf, 1);
+
+	/* Status Code */
+	wpabuf_put_le16(buf, WLAN_STATUS_SUCCESS);
+
+	/* Own RSNE */
+	wpa_pasn_add_rsne(buf, NULL, pasn->akmp, pasn->cipher);
+
+	/* FILS Nonce */
+	wpabuf_put_u8(buf, WLAN_EID_EXTENSION);
+	wpabuf_put_u8(buf, 1 + FILS_NONCE_LEN);
+	wpabuf_put_u8(buf, WLAN_EID_EXT_FILS_NONCE);
+	wpabuf_put_data(buf, pasn->fils.nonce, FILS_NONCE_LEN);
+
+	/* FILS Session */
+	wpabuf_put_u8(buf, WLAN_EID_EXTENSION);
+	wpabuf_put_u8(buf, 1 + FILS_SESSION_LEN);
+	wpabuf_put_u8(buf, WLAN_EID_EXT_FILS_SESSION);
+	wpabuf_put_data(buf, pasn->fils.session, FILS_SESSION_LEN);
+
+	/* Wrapped Data (ERP) */
+	wpabuf_put_u8(buf, WLAN_EID_EXTENSION);
+	wpabuf_put_u8(buf, 1 + wpabuf_len(erp_msg));
+	wpabuf_put_u8(buf, WLAN_EID_EXT_WRAPPED_DATA);
+	wpabuf_put_buf(buf, erp_msg);
+
+	/*
+	 * Calculate pending PMKID here so that we do not need to maintain a
+	 * copy of the EAP-Initiate/Reauth message.
+	 */
+	ret = fils_pmkid_erp(pasn->akmp, wpabuf_head(erp_msg),
+			     wpabuf_len(erp_msg),
+			     pasn->fils.erp_pmkid);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Failed to get ERP PMKID");
+		goto fail;
+	}
+
+	wpabuf_free(erp_msg);
+	erp_msg = NULL;
+
+	wpa_hexdump_buf(MSG_DEBUG, "PASN: FILS: Authentication frame", buf);
+	return buf;
+fail:
+	wpabuf_free(erp_msg);
+	wpabuf_free(buf);
+	return NULL;
+}
+
+
+static void wpas_pasn_initiate_eapol(struct wpa_supplicant *wpa_s)
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+	struct eapol_config eapol_conf;
+	struct wpa_ssid *ssid = pasn->ssid;
+
+	wpa_printf(MSG_DEBUG, "PASN: FILS: Initiating EAPOL");
+
+	eapol_sm_notify_eap_success(wpa_s->eapol, false);
+	eapol_sm_notify_eap_fail(wpa_s->eapol, false);
+	eapol_sm_notify_portControl(wpa_s->eapol, Auto);
+
+	os_memset(&eapol_conf, 0, sizeof(eapol_conf));
+	eapol_conf.fast_reauth = wpa_s->conf->fast_reauth;
+	eapol_conf.workaround = ssid->eap_workaround;
+
+	eapol_sm_notify_config(wpa_s->eapol, &ssid->eap, &eapol_conf);
+}
+
+
+static struct wpabuf * wpas_pasn_wd_fils_auth(struct wpa_supplicant *wpa_s)
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+	struct wpa_bss *bss;
+	const u8 *indic;
+	u16 fils_info;
+
+	wpa_printf(MSG_DEBUG, "PASN: FILS: wrapped data - completed=%u",
+		   pasn->fils.completed);
+
+	/* Nothing to add as we are done */
+	if (pasn->fils.completed)
+		return NULL;
+
+	if (!pasn->ssid) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: No network block");
+		return NULL;
+	}
+
+	bss = wpa_bss_get_bssid(wpa_s, pasn->bssid);
+	if (!bss) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: BSS not found");
+		return NULL;
+	}
+
+	indic = wpa_bss_get_ie(bss, WLAN_EID_FILS_INDICATION);
+	if (!indic || indic[1] < 2) {
+		wpa_printf(MSG_DEBUG, "PASN: Missing FILS Indication IE");
+		return NULL;
+	}
+
+	fils_info = WPA_GET_LE16(indic + 2);
+	if (!(fils_info & BIT(9))) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: FILS auth without PFS not supported");
+		return NULL;
+	}
+
+	wpas_pasn_initiate_eapol(wpa_s);
+
+	return wpas_pasn_fils_build_auth(wpa_s);
+}
+
+
+static int wpas_pasn_wd_fils_rx(struct wpa_supplicant *wpa_s, struct wpabuf *wd)
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+	struct ieee802_11_elems elems;
+	struct wpa_ie_data rsne_data;
+	u8 rmsk[ERP_MAX_KEY_LEN];
+	size_t rmsk_len;
+	u8 anonce[FILS_NONCE_LEN];
+	const u8 *data;
+	size_t buf_len;
+	struct wpabuf *fils_wd = NULL;
+	u16 alg, seq, status;
+	int ret;
+
+	if (!wd)
+		return -1;
+
+	data = wpabuf_head(wd);
+	buf_len = wpabuf_len(wd);
+
+	wpa_hexdump(MSG_DEBUG, "PASN: FILS: Authentication frame len=%zu",
+		    data, buf_len);
+
+	/* first handle the header */
+	if (buf_len < 6) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Buffer too short");
+		return -1;
+	}
+
+	alg = WPA_GET_LE16(data);
+	seq = WPA_GET_LE16(data + 2);
+	status = WPA_GET_LE16(data + 4);
+
+	wpa_printf(MSG_DEBUG, "PASN: FILS: commit: alg=%u, seq=%u, status=%u",
+		   alg, seq, status);
+
+	if (alg != WLAN_AUTH_FILS_SK || seq != 2 ||
+	    status != WLAN_STATUS_SUCCESS) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: FILS: Dropping peer authentication");
+		return -1;
+	}
+
+	data += 6;
+	buf_len -= 6;
+
+	if (ieee802_11_parse_elems(data, buf_len, &elems, 1) == ParseFailed) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Could not parse elements");
+		return -1;
+	}
+
+	if (!elems.rsn_ie || !elems.fils_nonce || !elems.fils_nonce ||
+	    !elems.wrapped_data) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Missing IEs");
+		return -1;
+	}
+
+	ret = wpa_parse_wpa_ie(elems.rsn_ie - 2, elems.rsn_ie_len + 2,
+			       &rsne_data);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Failed parsing RNSE");
+		return -1;
+	}
+
+	ret = wpa_pasn_validate_rsne(&rsne_data);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Failed validating RSNE");
+		return -1;
+	}
+
+	if (rsne_data.num_pmkid) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: FILS: Not expecting PMKID in RSNE");
+		return -1;
+	}
+
+	wpa_hexdump(MSG_DEBUG, "PASN: FILS: ANonce", elems.fils_nonce,
+		    FILS_NONCE_LEN);
+	os_memcpy(anonce, elems.fils_nonce, FILS_NONCE_LEN);
+
+	wpa_hexdump(MSG_DEBUG, "PASN: FILS: FILS Session", elems.fils_session,
+		    FILS_SESSION_LEN);
+
+	if (os_memcmp(pasn->fils.session, elems.fils_session,
+		      FILS_SESSION_LEN)) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Session mismatch");
+		return -1;
+	}
+
+	fils_wd = ieee802_11_defrag(&elems, WLAN_EID_EXTENSION,
+				    WLAN_EID_EXT_WRAPPED_DATA);
+
+	if (!fils_wd) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: FILS: Failed getting wrapped data");
+		return -1;
+	}
+
+	eapol_sm_process_erp_finish(wpa_s->eapol, wpabuf_head(fils_wd),
+				    wpabuf_len(fils_wd));
+
+	wpabuf_free(fils_wd);
+	fils_wd = NULL;
+
+	if (eapol_sm_failed(wpa_s->eapol)) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: ERP finish failed");
+		return -1;
+	}
+
+	rmsk_len = ERP_MAX_KEY_LEN;
+	ret = eapol_sm_get_key(wpa_s->eapol, rmsk, rmsk_len);
+
+	if (ret == PMK_LEN) {
+		rmsk_len = PMK_LEN;
+		ret = eapol_sm_get_key(wpa_s->eapol, rmsk, rmsk_len);
+	}
+
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Failed getting RMSK");
+		return -1;
+	}
+
+	ret = fils_rmsk_to_pmk(pasn->akmp, rmsk, rmsk_len,
+			       pasn->fils.nonce, anonce, NULL, 0,
+			       pasn->pmk, &pasn->pmk_len);
+
+	forced_memzero(rmsk, sizeof(rmsk));
+
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: FILS: Failed to derive PMK");
+		return -1;
+	}
+
+	wpa_hexdump(MSG_DEBUG, "PASN: FILS: PMKID", pasn->fils.erp_pmkid,
+		    PMKID_LEN);
+
+	wpa_printf(MSG_DEBUG, "PASN: FILS: ERP processing succeeded");
+
+	wpa_pasn_pmksa_cache_add(wpa_s->wpa, pasn->pmk,
+				 pasn->pmk_len, pasn->fils.erp_pmkid,
+				 pasn->bssid, pasn->akmp);
+
+	pasn->fils.completed = true;
+	return 0;
+}
+
+#endif /* CONFIG_FILS */
+
+
+static struct wpabuf * wpas_pasn_get_wrapped_data(struct wpa_supplicant *wpa_s)
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+
+	if (pasn->using_pmksa)
+		return NULL;
+
+	switch (pasn->akmp) {
+	case WPA_KEY_MGMT_PASN:
+		/* no wrapped data */
+		return NULL;
+	case WPA_KEY_MGMT_SAE:
+#ifdef CONFIG_SAE
+		if (pasn->trans_seq == 0)
+			return wpas_pasn_wd_sae_commit(wpa_s);
+		if (pasn->trans_seq == 2)
+			return wpas_pasn_wd_sae_confirm(wpa_s);
+#endif /* CONFIG_SAE */
+		wpa_printf(MSG_ERROR,
+			   "PASN: SAE: Cannot derive wrapped data");
+		return NULL;
+	case WPA_KEY_MGMT_FILS_SHA256:
+	case WPA_KEY_MGMT_FILS_SHA384:
+#ifdef CONFIG_FILS
+		return wpas_pasn_wd_fils_auth(wpa_s);
+#endif /* CONFIG_FILS */
+	case WPA_KEY_MGMT_FT_PSK:
+	case WPA_KEY_MGMT_FT_IEEE8021X:
+	case WPA_KEY_MGMT_FT_IEEE8021X_SHA384:
+		/*
+		 * Wrapped data with these AKMs is optional and is only needed
+		 * for further validation of FT security parameters. For now do
+		 * not use them.
+		 */
+		return NULL;
+	default:
+		wpa_printf(MSG_ERROR,
+			   "PASN: TODO: Wrapped data for akmp=0x%x",
+			   pasn->akmp);
+		return NULL;
+	}
+}
+
+
+static u8 wpas_pasn_get_wrapped_data_format(struct wpas_pasn *pasn)
+{
+	if (pasn->using_pmksa)
+		return WPA_PASN_WRAPPED_DATA_NO;
+
+	/* Note: Valid AKMP is expected to already be validated */
+	switch (pasn->akmp) {
+	case WPA_KEY_MGMT_SAE:
+		return WPA_PASN_WRAPPED_DATA_SAE;
+	case WPA_KEY_MGMT_FILS_SHA256:
+	case WPA_KEY_MGMT_FILS_SHA384:
+		return WPA_PASN_WRAPPED_DATA_FILS_SK;
+	case WPA_KEY_MGMT_FT_PSK:
+	case WPA_KEY_MGMT_FT_IEEE8021X:
+	case WPA_KEY_MGMT_FT_IEEE8021X_SHA384:
+		/*
+		 * Wrapped data with these AKMs is optional and is only needed
+		 * for further validation of FT security parameters. For now do
+		 * not use them.
+		 */
+		return WPA_PASN_WRAPPED_DATA_NO;
+	case WPA_KEY_MGMT_PASN:
+	default:
+		return WPA_PASN_WRAPPED_DATA_NO;
+	}
+}
+
+
+static struct wpabuf * wpas_pasn_build_auth_1(struct wpa_supplicant *wpa_s)
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+	struct wpabuf *buf, *pubkey = NULL, *wrapped_data_buf = NULL;
+	const u8 *pmkid;
+	u8 wrapped_data;
+	int ret;
+	u16 capab;
+
+	wpa_printf(MSG_DEBUG, "PASN: Building frame 1");
+
+	if (pasn->trans_seq)
+		return NULL;
+
+	buf = wpabuf_alloc(1500);
+	if (!buf)
+		goto fail;
+
+	/* Get public key */
+	pubkey = crypto_ecdh_get_pubkey(pasn->ecdh, 0);
+	pubkey = wpabuf_zeropad(pubkey, crypto_ecdh_prime_len(pasn->ecdh));
+	if (!pubkey) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to get pubkey");
+		goto fail;
+	}
+
+	wrapped_data = wpas_pasn_get_wrapped_data_format(pasn);
+
+	wpa_pasn_build_auth_header(buf, pasn->bssid,
+				   wpa_s->own_addr, pasn->bssid,
+				   pasn->trans_seq + 1, WLAN_STATUS_SUCCESS);
+
+	pmkid = NULL;
+	if (wpa_key_mgmt_ft(pasn->akmp)) {
+		ret = wpa_pasn_ft_derive_pmk_r1(wpa_s->wpa, pasn->akmp,
+						pasn->bssid,
+						pasn->pmk_r1,
+						&pasn->pmk_r1_len,
+						pasn->pmk_r1_name);
+		if (ret) {
+			wpa_printf(MSG_DEBUG,
+				   "PASN: FT: Failed to derive keys");
+			goto fail;
+		}
+
+		pmkid = pasn->pmk_r1_name;
+	} else if (wrapped_data != WPA_PASN_WRAPPED_DATA_NO) {
+		struct rsn_pmksa_cache_entry *pmksa;
+
+		pmksa = wpa_sm_pmksa_cache_get(wpa_s->wpa, pasn->bssid,
+					       NULL, NULL, pasn->akmp);
+		if (pmksa)
+			pmkid = pmksa->pmkid;
+
+		/*
+		 * Note: Even when PMKSA is available, also add wrapped data as
+		 * it is possible that the PMKID is no longer valid at the AP.
+		 */
+		wrapped_data_buf = wpas_pasn_get_wrapped_data(wpa_s);
+	}
+
+	if (wpa_pasn_add_rsne(buf, pmkid, pasn->akmp, pasn->cipher) < 0)
+		goto fail;
+
+	if (!wrapped_data_buf)
+		wrapped_data = WPA_PASN_WRAPPED_DATA_NO;
+
+	wpa_pasn_add_parameter_ie(buf, pasn->group, wrapped_data,
+				  pubkey, NULL, -1);
+
+	if (wpa_pasn_add_wrapped_data(buf, wrapped_data_buf) < 0)
+		goto fail;
+
+	/* Add own RNSXE */
+	/* TODO: How to handle protected TWT and SAE H2E? */
+	capab = 0;
+	if (wpa_s->drv_flags2 & WPA_DRIVER_FLAGS2_SEC_LTF)
+		capab |= BIT(WLAN_RSNX_CAPAB_SECURE_LTF);
+	if (wpa_s->drv_flags2 & WPA_DRIVER_FLAGS2_SEC_RTT)
+		capab |= BIT(WLAN_RSNX_CAPAB_SECURE_RTT);
+	if (wpa_s->drv_flags2 & WPA_DRIVER_FLAGS2_PROT_RANGE_NEG)
+		capab |= BIT(WLAN_RSNX_CAPAB_PROT_RANGE_NEG);
+	wpa_pasn_add_rsnxe(buf, capab);
+
+	ret = pasn_auth_frame_hash(pasn->akmp, pasn->cipher,
+				   wpabuf_head_u8(buf) + IEEE80211_HDRLEN,
+				   wpabuf_len(buf) - IEEE80211_HDRLEN,
+				   pasn->hash);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to compute hash");
+		goto fail;
+	}
+
+	pasn->trans_seq++;
+
+	wpabuf_free(wrapped_data_buf);
+	wpabuf_free(pubkey);
+
+	wpa_printf(MSG_DEBUG, "PASN: Frame 1: Success");
+	return buf;
+fail:
+	pasn->status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+	wpabuf_free(wrapped_data_buf);
+	wpabuf_free(pubkey);
+	wpabuf_free(buf);
+	return NULL;
+}
+
+
+static struct wpabuf * wpas_pasn_build_auth_3(struct wpa_supplicant *wpa_s)
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+	struct wpabuf *buf, *wrapped_data_buf = NULL;
+	u8 mic[WPA_PASN_MAX_MIC_LEN];
+	u8 mic_len, data_len;
+	const u8 *data;
+	u8 *ptr;
+	u8 wrapped_data;
+	int ret;
+
+	wpa_printf(MSG_DEBUG, "PASN: Building frame 3");
+
+	if (pasn->trans_seq != 2)
+		return NULL;
+
+	buf = wpabuf_alloc(1500);
+	if (!buf)
+		goto fail;
+
+	wrapped_data = wpas_pasn_get_wrapped_data_format(pasn);
+
+	wpa_pasn_build_auth_header(buf, pasn->bssid,
+				   wpa_s->own_addr, pasn->bssid,
+				   pasn->trans_seq + 1, WLAN_STATUS_SUCCESS);
+
+	wrapped_data_buf = wpas_pasn_get_wrapped_data(wpa_s);
+
+	if (!wrapped_data_buf)
+		wrapped_data = WPA_PASN_WRAPPED_DATA_NO;
+
+	wpa_pasn_add_parameter_ie(buf, pasn->group, wrapped_data,
+				  NULL, NULL, -1);
+
+	if (wpa_pasn_add_wrapped_data(buf, wrapped_data_buf) < 0)
+		goto fail;
+	wpabuf_free(wrapped_data_buf);
+	wrapped_data_buf = NULL;
+
+	/* Add the MIC */
+	mic_len = pasn_mic_len(pasn->akmp, pasn->cipher);
+	wpabuf_put_u8(buf, WLAN_EID_MIC);
+	wpabuf_put_u8(buf, mic_len);
+	ptr = wpabuf_put(buf, mic_len);
+
+	os_memset(ptr, 0, mic_len);
+
+	data = wpabuf_head_u8(buf) + IEEE80211_HDRLEN;
+	data_len = wpabuf_len(buf) - IEEE80211_HDRLEN;
+
+	ret = pasn_mic(pasn->ptk.kck, pasn->akmp, pasn->cipher,
+		       wpa_s->own_addr, pasn->bssid,
+		       pasn->hash, mic_len * 2, data, data_len, mic);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: frame 3: Failed MIC calculation");
+		goto fail;
+	}
+
+	os_memcpy(ptr, mic, mic_len);
+
+	pasn->trans_seq++;
+
+	wpa_printf(MSG_DEBUG, "PASN: frame 3: Success");
+	return buf;
+fail:
+	pasn->status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+	wpabuf_free(wrapped_data_buf);
+	wpabuf_free(buf);
+	return NULL;
+}
+
+
+static void wpas_pasn_reset(struct wpa_supplicant *wpa_s)
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+
+	wpa_printf(MSG_DEBUG, "PASN: Reset");
+
+	crypto_ecdh_deinit(pasn->ecdh);
+	pasn->ecdh = NULL;
+
+	wpas_pasn_cancel_auth_work(wpa_s);
+	wpa_s->pasn_auth_work = NULL;
+
+	eloop_cancel_timeout(wpas_pasn_auth_work_timeout, wpa_s, NULL);
+
+	pasn->akmp = 0;
+	pasn->cipher = 0;
+	pasn->group = 0;
+	pasn->trans_seq = 0;
+	pasn->pmk_len = 0;
+	pasn->using_pmksa = false;
+
+	forced_memzero(pasn->pmk, sizeof(pasn->pmk));
+	forced_memzero(&pasn->ptk, sizeof(pasn->ptk));
+	forced_memzero(&pasn->hash, sizeof(pasn->hash));
+
+	wpabuf_free(pasn->beacon_rsne_rsnxe);
+	pasn->beacon_rsne_rsnxe = NULL;
+
+#ifdef CONFIG_SAE
+	sae_clear_data(&pasn->sae);
+#endif /* CONFIG_SAE */
+
+#ifdef CONFIG_FILS
+	os_memset(&pasn->fils, 0, sizeof(pasn->fils));
+#endif /* CONFIG_FILS*/
+
+#ifdef CONFIG_IEEE80211R
+	forced_memzero(pasn->pmk_r1, sizeof(pasn->pmk_r1));
+	pasn->pmk_r1_len = 0;
+	os_memset(pasn->pmk_r1_name, 0, sizeof(pasn->pmk_r1_name));
+#endif /* CONFIG_IEEE80211R */
+	pasn->status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+}
+
+
+static int wpas_pasn_set_pmk(struct wpa_supplicant *wpa_s,
+			     struct wpa_ie_data *rsn_data,
+			     struct wpa_pasn_params_data *pasn_data,
+			     struct wpabuf *wrapped_data)
+{
+	static const u8 pasn_default_pmk[] = {'P', 'M', 'K', 'z'};
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+
+	os_memset(pasn->pmk, 0, sizeof(pasn->pmk));
+	pasn->pmk_len = 0;
+
+	if (pasn->akmp == WPA_KEY_MGMT_PASN) {
+		wpa_printf(MSG_DEBUG, "PASN: Using default PMK");
+
+		pasn->pmk_len = WPA_PASN_PMK_LEN;
+		os_memcpy(pasn->pmk, pasn_default_pmk,
+			  sizeof(pasn_default_pmk));
+		return 0;
+	}
+
+	if (wpa_key_mgmt_ft(pasn->akmp)) {
+#ifdef CONFIG_IEEE80211R
+		wpa_printf(MSG_DEBUG, "PASN: FT: Using PMK-R1");
+		pasn->pmk_len = pasn->pmk_r1_len;
+		os_memcpy(pasn->pmk, pasn->pmk_r1, pasn->pmk_r1_len);
+		pasn->using_pmksa = true;
+		return 0;
+#else /* CONFIG_IEEE80211R */
+		wpa_printf(MSG_DEBUG, "PASN: FT: Not supported");
+		return -1;
+#endif /* CONFIG_IEEE80211R */
+	}
+
+	if (rsn_data->num_pmkid) {
+		struct rsn_pmksa_cache_entry *pmksa;
+
+		pmksa = wpa_sm_pmksa_cache_get(wpa_s->wpa, pasn->bssid,
+					       rsn_data->pmkid, NULL,
+					       pasn->akmp);
+		if (pmksa) {
+			wpa_printf(MSG_DEBUG, "PASN: Using PMKSA");
+
+			pasn->pmk_len = pmksa->pmk_len;
+			os_memcpy(pasn->pmk, pmksa->pmk, pmksa->pmk_len);
+			pasn->using_pmksa = true;
+
+			return 0;
+		}
+	}
+
+#ifdef CONFIG_SAE
+	if (pasn->akmp == WPA_KEY_MGMT_SAE) {
+		int ret;
+
+		ret = wpas_pasn_wd_sae_rx(wpa_s, wrapped_data);
+		if (ret) {
+			wpa_printf(MSG_DEBUG,
+				   "PASN: Failed processing SAE wrapped data");
+			pasn->status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+			return -1;
+		}
+
+		wpa_printf(MSG_DEBUG, "PASN: Success deriving PMK with SAE");
+		pasn->pmk_len = PMK_LEN;
+		os_memcpy(pasn->pmk, pasn->sae.pmk, PMK_LEN);
+
+		wpa_pasn_pmksa_cache_add(wpa_s->wpa, pasn->pmk,
+					 pasn->pmk_len, pasn->sae.pmkid,
+					 pasn->bssid, pasn->akmp);
+		return 0;
+	}
+#endif /* CONFIG_SAE */
+
+#ifdef CONFIG_FILS
+	if (pasn->akmp == WPA_KEY_MGMT_FILS_SHA256 ||
+	    pasn->akmp == WPA_KEY_MGMT_FILS_SHA384) {
+		int ret;
+
+		ret = wpas_pasn_wd_fils_rx(wpa_s, wrapped_data);
+		if (ret) {
+			wpa_printf(MSG_DEBUG,
+				   "PASN: Failed processing FILS wrapped data");
+			pasn->status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+			return -1;
+		}
+
+		return 0;
+	}
+#endif	/* CONFIG_FILS */
+
+	/* TODO: Derive PMK based on wrapped data */
+	wpa_printf(MSG_DEBUG, "PASN: Missing implementation to derive PMK");
+	pasn->status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+	return -1;
+}
+
+
+static int wpas_pasn_start(struct wpa_supplicant *wpa_s, const u8 *bssid,
+			   int akmp, int cipher, u16 group, int freq,
+			   const u8 *beacon_rsne, u8 beacon_rsne_len,
+			   const u8 *beacon_rsnxe, u8 beacon_rsnxe_len,
+			   int network_id)
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+	struct wpa_ssid *ssid = NULL;
+	struct wpabuf *frame;
+	int ret;
+
+	/* TODO: Currently support only ECC groups */
+	if (!dragonfly_suitable_group(group, 1)) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Reject unsuitable group %u", group);
+		return -1;
+	}
+
+	ssid = wpa_config_get_network(wpa_s->conf, network_id);
+
+	switch (akmp) {
+	case WPA_KEY_MGMT_PASN:
+		break;
+#ifdef CONFIG_SAE
+	case WPA_KEY_MGMT_SAE:
+		if (!ssid) {
+			wpa_printf(MSG_DEBUG,
+				   "PASN: No network profile found for SAE");
+			return -1;
+		}
+		pasn->sae.state = SAE_NOTHING;
+		pasn->sae.send_confirm = 0;
+		pasn->ssid = ssid;
+		break;
+#endif /* CONFIG_SAE */
+#ifdef CONFIG_FILS
+	case WPA_KEY_MGMT_FILS_SHA256:
+	case WPA_KEY_MGMT_FILS_SHA384:
+		pasn->ssid = ssid;
+		break;
+#endif /* CONFIG_FILS */
+#ifdef CONFIG_IEEE80211R
+	case WPA_KEY_MGMT_FT_PSK:
+	case WPA_KEY_MGMT_FT_IEEE8021X:
+	case WPA_KEY_MGMT_FT_IEEE8021X_SHA384:
+		break;
+#endif /* CONFIG_IEEE80211R */
+	default:
+		wpa_printf(MSG_ERROR, "PASN: Unsupported AKMP=0x%x", akmp);
+		return -1;
+	}
+
+	pasn->ecdh = crypto_ecdh_init(group);
+	if (!pasn->ecdh) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to init ECDH");
+		goto fail;
+	}
+
+	pasn->beacon_rsne_rsnxe = wpabuf_alloc(beacon_rsne_len +
+					       beacon_rsnxe_len);
+	if (!pasn->beacon_rsne_rsnxe) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed storing beacon RSNE/RSNXE");
+		goto fail;
+	}
+
+	wpabuf_put_data(pasn->beacon_rsne_rsnxe, beacon_rsne, beacon_rsne_len);
+	if (beacon_rsnxe && beacon_rsnxe_len)
+		wpabuf_put_data(pasn->beacon_rsne_rsnxe, beacon_rsnxe,
+				beacon_rsnxe_len);
+
+	pasn->akmp = akmp;
+	pasn->cipher = cipher;
+	pasn->group = group;
+	pasn->freq = freq;
+	os_memcpy(pasn->bssid, bssid, ETH_ALEN);
+
+	wpa_printf(MSG_DEBUG,
+		   "PASN: Init: " MACSTR " akmp=0x%x, cipher=0x%x, group=%u",
+		   MAC2STR(pasn->bssid), pasn->akmp, pasn->cipher,
+		   pasn->group);
+
+	frame = wpas_pasn_build_auth_1(wpa_s);
+	if (!frame) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed building 1st auth frame");
+		goto fail;
+	}
+
+	ret = wpa_drv_send_mlme(wpa_s, wpabuf_head(frame), wpabuf_len(frame), 0,
+				pasn->freq, 1000);
+
+	wpabuf_free(frame);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed sending 1st auth frame");
+		goto fail;
+	}
+
+	eloop_register_timeout(2, 0, wpas_pasn_auth_work_timeout, wpa_s, NULL);
+	return 0;
+
+fail:
+	return -1;
+}
+
+
+static struct wpa_bss * wpas_pasn_allowed(struct wpa_supplicant *wpa_s,
+					  const u8 *bssid, int akmp, int cipher)
+{
+	struct wpa_bss *bss;
+	const u8 *rsne;
+	struct wpa_ie_data rsne_data;
+	int ret;
+
+	if (os_memcmp(wpa_s->bssid, bssid, ETH_ALEN) == 0) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Not doing authentication with current BSS");
+		return NULL;
+	}
+
+	bss = wpa_bss_get_bssid(wpa_s, bssid);
+	if (!bss) {
+		wpa_printf(MSG_DEBUG, "PASN: BSS not found");
+		return NULL;
+	}
+
+	rsne = wpa_bss_get_ie(bss, WLAN_EID_RSN);
+	if (!rsne) {
+		wpa_printf(MSG_DEBUG, "PASN: BSS without RSNE");
+		return NULL;
+	}
+
+	ret = wpa_parse_wpa_ie(rsne, *(rsne + 1) + 2, &rsne_data);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed parsing RSNE data");
+		return NULL;
+	}
+
+	if (!(rsne_data.key_mgmt & akmp) ||
+	    !(rsne_data.pairwise_cipher & cipher)) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: AP does not support requested AKMP or cipher");
+		return NULL;
+	}
+
+	return bss;
+}
+
+
+static void wpas_pasn_auth_start_cb(struct wpa_radio_work *work, int deinit)
+{
+	struct wpa_supplicant *wpa_s = work->wpa_s;
+	struct wpa_pasn_auth_work *awork = work->ctx;
+	struct wpa_bss *bss;
+	const u8 *rsne, *rsnxe;
+	int ret;
+
+	wpa_printf(MSG_DEBUG, "PASN: auth_start_cb: deinit=%d", deinit);
+
+	if (deinit) {
+		if (work->started) {
+			eloop_cancel_timeout(wpas_pasn_auth_work_timeout,
+					     wpa_s, NULL);
+			wpa_s->pasn_auth_work = NULL;
+		}
+		os_free(awork);
+		return;
+	}
+
+	/*
+	 * It is possible that by the time the callback is called, the PASN
+	 * authentication is not allowed, e.g., a connection with the AP was
+	 * established.
+	 */
+	bss = wpas_pasn_allowed(wpa_s, awork->bssid, awork->akmp,
+				awork->cipher);
+	if (!bss) {
+		wpa_printf(MSG_DEBUG, "PASN: auth_start_cb: Not allowed");
+		goto fail;
+	}
+
+	rsne = wpa_bss_get_ie(bss, WLAN_EID_RSN);
+	if (!rsne) {
+		wpa_printf(MSG_DEBUG, "PASN: BSS without RSNE");
+		goto fail;
+	}
+
+	rsnxe = wpa_bss_get_ie(bss, WLAN_EID_RSNX);
+
+	ret = wpas_pasn_start(wpa_s, awork->bssid, awork->akmp, awork->cipher,
+			      awork->group, bss->freq, rsne, *(rsne + 1) + 2,
+			      rsnxe, rsnxe ? *(rsnxe + 1) + 2 : 0,
+			      awork->network_id);
+	if (ret) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Failed to start PASN authentication");
+		goto fail;
+	}
+
+	wpa_s->pasn_auth_work = work;
+	return;
+fail:
+	os_free(awork);
+	work->ctx = NULL;
+	radio_work_done(work);
+}
+
+
+int wpas_pasn_auth_start(struct wpa_supplicant *wpa_s, const u8 *bssid,
+			 int akmp, int cipher, u16 group, int network_id)
+{
+	struct wpa_pasn_auth_work *awork;
+	struct wpa_bss *bss;
+
+	wpa_printf(MSG_DEBUG, "PASN: Start: " MACSTR " akmp=0x%x, cipher=0x%x",
+		   MAC2STR(bssid), akmp, cipher);
+
+	/*
+	 * TODO: Consider modifying the offchannel logic to handle additional
+	 * Management frames other then Action frames. For now allow PASN only
+	 * with drivers that support off-channel TX.
+	 */
+	if (!(wpa_s->drv_flags & WPA_DRIVER_FLAGS_OFFCHANNEL_TX)) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Driver does not support offchannel TX");
+		return -1;
+	}
+
+	if (radio_work_pending(wpa_s, "pasn-start-auth")) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: send_auth: Work is already pending");
+		return -1;
+	}
+
+	if (wpa_s->pasn_auth_work) {
+		wpa_printf(MSG_DEBUG, "PASN: send_auth: Already in progress");
+		return -1;
+	}
+
+	bss = wpas_pasn_allowed(wpa_s, bssid, akmp, cipher);
+	if (!bss)
+		return -1;
+
+	wpas_pasn_reset(wpa_s);
+
+	awork = os_zalloc(sizeof(*awork));
+	if (!awork)
+		return -1;
+
+	os_memcpy(awork->bssid, bssid, ETH_ALEN);
+	awork->akmp = akmp;
+	awork->cipher = cipher;
+	awork->group = group;
+	awork->network_id = network_id;
+
+	if (radio_add_work(wpa_s, bss->freq, "pasn-start-auth", 1,
+			   wpas_pasn_auth_start_cb, awork) < 0) {
+		os_free(awork);
+		return -1;
+	}
+
+	wpa_printf(MSG_DEBUG, "PASN: Auth work successfully added");
+	return 0;
+}
+
+
+void wpas_pasn_auth_stop(struct wpa_supplicant *wpa_s)
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+
+	if (!wpa_s->pasn.ecdh)
+		return;
+
+	wpa_printf(MSG_DEBUG, "PASN: Stopping authentication");
+
+	wpas_pasn_auth_status(wpa_s, pasn->bssid, pasn->akmp, pasn->cipher,
+			      pasn->status);
+
+	wpas_pasn_reset(wpa_s);
+}
+
+
+int wpas_pasn_auth_rx(struct wpa_supplicant *wpa_s,
+		      const struct ieee80211_mgmt *mgmt, size_t len)
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+	struct ieee802_11_elems elems;
+	struct wpa_ie_data rsn_data;
+	struct wpa_pasn_params_data pasn_params;
+	struct wpabuf *wrapped_data = NULL, *secret = NULL, *frame = NULL;
+	u8 mic[WPA_PASN_MAX_MIC_LEN], out_mic[WPA_PASN_MAX_MIC_LEN];
+	u8 mic_len;
+	u16 status;
+	int ret;
+	u16 fc = host_to_le16((WLAN_FC_TYPE_MGMT << 2) |
+			      (WLAN_FC_STYPE_AUTH << 4));
+
+	if (!wpa_s->pasn_auth_work || !mgmt ||
+	    len < offsetof(struct ieee80211_mgmt, u.auth.variable))
+		return -2;
+
+	/* Not an Authentication frame; do nothing */
+	if ((mgmt->frame_control & fc) != fc)
+		return -2;
+
+	/* Not our frame; do nothing */
+	if (os_memcmp(mgmt->da, wpa_s->own_addr, ETH_ALEN) != 0 ||
+	    os_memcmp(mgmt->sa, pasn->bssid, ETH_ALEN) != 0 ||
+	    os_memcmp(mgmt->bssid, pasn->bssid, ETH_ALEN) != 0)
+		return -2;
+
+	/* Not PASN; do nothing */
+	if (mgmt->u.auth.auth_alg != host_to_le16(WLAN_AUTH_PASN))
+		return -2;
+
+	if (mgmt->u.auth.auth_transaction !=
+	    host_to_le16(pasn->trans_seq + 1)) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: RX: Invalid transaction sequence: (%u != %u)",
+			   le_to_host16(mgmt->u.auth.auth_transaction),
+			   pasn->trans_seq + 1);
+		return -1;
+	}
+
+	status = le_to_host16(mgmt->u.auth.status_code);
+
+	if (status != WLAN_STATUS_SUCCESS &&
+	    status != WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Authentication rejected - status=%u", status);
+		pasn->status = status;
+		wpas_pasn_auth_stop(wpa_s);
+		return -1;
+	}
+
+	if (ieee802_11_parse_elems(mgmt->u.auth.variable,
+				   len - offsetof(struct ieee80211_mgmt,
+						  u.auth.variable),
+				   &elems, 0) == ParseFailed) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Failed parsing Authentication frame");
+		goto fail;
+	}
+
+	/* Check that the MIC IE exists. Save it and zero out the memory */
+	mic_len = pasn_mic_len(pasn->akmp, pasn->cipher);
+	if (status == WLAN_STATUS_SUCCESS) {
+		if (!elems.mic || elems.mic_len != mic_len) {
+			wpa_printf(MSG_DEBUG,
+				   "PASN: Invalid MIC. Expecting len=%u",
+				   mic_len);
+			goto fail;
+		} else {
+			os_memcpy(mic, elems.mic, mic_len);
+			/* TODO: Clean this up.. Should not be modifying the
+			 * received message buffer. */
+			os_memset((u8 *) elems.mic, 0, mic_len);
+		}
+	}
+
+	if (!elems.pasn_params || !elems.pasn_params_len) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Missing PASN Parameters IE");
+		goto fail;
+	}
+
+	ret = wpa_pasn_parse_parameter_ie(elems.pasn_params - 3,
+					  elems.pasn_params_len + 3,
+					  true, &pasn_params);
+	if (ret) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Failed validation PASN of Parameters IE");
+		goto fail;
+	}
+
+	/* TODO: handle comeback flow */
+	if (status == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: Authentication temporarily rejected");
+		goto fail;
+	}
+
+	ret = wpa_parse_wpa_ie(elems.rsn_ie - 2, elems.rsn_ie_len + 2,
+			       &rsn_data);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed parsing RNSE");
+		goto fail;
+	}
+
+	ret = wpa_pasn_validate_rsne(&rsn_data);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed validating RSNE");
+		goto fail;
+	}
+
+	if (pasn->akmp != rsn_data.key_mgmt ||
+	    pasn->cipher != rsn_data.pairwise_cipher) {
+		wpa_printf(MSG_DEBUG, "PASN: Mismatch in AKMP/cipher");
+		goto fail;
+	}
+
+	if (pasn->group != pasn_params.group) {
+		wpa_printf(MSG_DEBUG, "PASN: Mismatch in group");
+		goto fail;
+	}
+
+	if (!pasn_params.pubkey || !pasn_params.pubkey_len) {
+		wpa_printf(MSG_DEBUG, "PASN: Invalid public key");
+		goto fail;
+	}
+
+	secret = crypto_ecdh_set_peerkey(pasn->ecdh, 0,
+					 pasn_params.pubkey,
+					 pasn_params.pubkey_len);
+
+	if (!secret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to derive shared secret");
+		goto fail;
+	}
+
+	if (pasn_params.wrapped_data_format != WPA_PASN_WRAPPED_DATA_NO) {
+		wrapped_data = ieee802_11_defrag(&elems,
+						 WLAN_EID_EXTENSION,
+						 WLAN_EID_EXT_WRAPPED_DATA);
+
+		if (!wrapped_data) {
+			wpa_printf(MSG_DEBUG, "PASN: Missing wrapped data");
+			goto fail;
+		}
+	}
+
+	ret = wpas_pasn_set_pmk(wpa_s, &rsn_data, &pasn_params, wrapped_data);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to set PMK");
+		goto fail;
+	}
+
+	ret = pasn_pmk_to_ptk(pasn->pmk, pasn->pmk_len,
+			      wpa_s->own_addr, pasn->bssid,
+			      wpabuf_head(secret), wpabuf_len(secret),
+			      &pasn->ptk, pasn->akmp, pasn->cipher,
+			      WPA_KDK_MAX_LEN);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed to derive PTK");
+		goto fail;
+	}
+
+	wpabuf_free(wrapped_data);
+	wrapped_data = NULL;
+	wpabuf_free(secret);
+	secret = NULL;
+
+	/* Verify the MIC */
+	ret = pasn_mic(pasn->ptk.kck, pasn->akmp, pasn->cipher,
+		       pasn->bssid, wpa_s->own_addr,
+		       wpabuf_head(pasn->beacon_rsne_rsnxe),
+		       wpabuf_len(pasn->beacon_rsne_rsnxe),
+		       (u8 *) &mgmt->u.auth,
+		       len - offsetof(struct ieee80211_mgmt, u.auth),
+		       out_mic);
+
+	wpa_hexdump_key(MSG_DEBUG, "PASN: Frame MIC", mic, mic_len);
+	if (ret || os_memcmp(mic, out_mic, mic_len) != 0) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed MIC verification");
+		goto fail;
+	}
+
+	pasn->trans_seq++;
+
+	wpa_printf(MSG_DEBUG, "PASN: Success verifying Authentication frame");
+
+	frame = wpas_pasn_build_auth_3(wpa_s);
+	if (!frame) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed building 3rd auth frame");
+		goto fail;
+	}
+
+	ret = wpa_drv_send_mlme(wpa_s, wpabuf_head(frame), wpabuf_len(frame), 0,
+				pasn->freq, 100);
+	wpabuf_free(frame);
+	if (ret) {
+		wpa_printf(MSG_DEBUG, "PASN: Failed sending 3st auth frame");
+		goto fail;
+	}
+
+	wpa_printf(MSG_DEBUG, "PASN: Success sending last frame. Store PTK");
+
+	ptksa_cache_add(wpa_s->ptksa, pasn->bssid, pasn->cipher,
+			dot11RSNAConfigPMKLifetime, &pasn->ptk);
+
+	forced_memzero(&pasn->ptk, sizeof(pasn->ptk));
+
+	pasn->status = WLAN_STATUS_SUCCESS;
+	return 0;
+fail:
+	wpa_printf(MSG_DEBUG, "PASN: Failed RX processing - terminating");
+	wpabuf_free(wrapped_data);
+	wpabuf_free(secret);
+
+	/*
+	 * TODO: In case of an error the standard allows to silently drop
+	 * the frame and terminate the authentication exchange. However, better
+	 * reply to the AP with an error status.
+	 */
+	pasn->status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+	wpas_pasn_auth_stop(wpa_s);
+	return -1;
+}
+
+
+int wpas_pasn_auth_tx_status(struct wpa_supplicant *wpa_s,
+			     const u8 *data, size_t data_len, u8 acked)
+
+{
+	struct wpas_pasn *pasn = &wpa_s->pasn;
+	const struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) data;
+	u16 fc = host_to_le16((WLAN_FC_TYPE_MGMT << 2) |
+			      (WLAN_FC_STYPE_AUTH << 4));
+
+	wpa_printf(MSG_DEBUG, "PASN: auth_tx_status: acked=%u", acked);
+
+	if (!wpa_s->pasn_auth_work) {
+		wpa_printf(MSG_DEBUG,
+			   "PASN: auth_tx_status: no work in progress");
+		return -1;
+	}
+
+	if (!mgmt ||
+	    data_len < offsetof(struct ieee80211_mgmt, u.auth.variable))
+		return -1;
+
+	/* Not an authentication frame; do nothing */
+	if ((mgmt->frame_control & fc) != fc)
+		return -1;
+
+	/* Not our frame; do nothing */
+	if (os_memcmp(mgmt->da, pasn->bssid, ETH_ALEN) ||
+	    os_memcmp(mgmt->sa, wpa_s->own_addr, ETH_ALEN) ||
+	    os_memcmp(mgmt->bssid, pasn->bssid, ETH_ALEN))
+		return -1;
+
+	/* Not PASN; do nothing */
+	if (mgmt->u.auth.auth_alg !=  host_to_le16(WLAN_AUTH_PASN))
+		return -1;
+
+	if (mgmt->u.auth.auth_transaction != host_to_le16(pasn->trans_seq)) {
+		wpa_printf(MSG_ERROR,
+			   "PASN: Invalid transaction sequence: (%u != %u)",
+			   pasn->trans_seq,
+			   le_to_host16(mgmt->u.auth.auth_transaction));
+		return 0;
+	}
+
+	wpa_printf(MSG_ERROR,
+		   "PASN: auth with trans_seq=%u, acked=%u", pasn->trans_seq,
+		   acked);
+
+	/*
+	 * Even if the frame was not acked, do not treat this is an error, and
+	 * try to complete the flow, relying on the PASN timeout callback to
+	 * clean up.
+	 */
+	if (pasn->trans_seq == 3) {
+		wpa_printf(MSG_DEBUG, "PASN: auth complete with: " MACSTR,
+			   MAC2STR(pasn->bssid));
+		/*
+		 * Either frame was not ACKed or it was ACKed but the trans_seq
+		 * != 1, i.e., not expecting an RX frame, so we are done.
+		 */
+		wpas_pasn_auth_stop(wpa_s);
+	}
+
+	return 0;
+}
diff --git a/wpa_supplicant/robust_av.c b/wpa_supplicant/robust_av.c
index 1280f5d..f6da56e 100644
--- a/wpa_supplicant/robust_av.c
+++ b/wpa_supplicant/robust_av.c
@@ -48,18 +48,13 @@
 int wpas_send_mscs_req(struct wpa_supplicant *wpa_s)
 {
 	struct wpabuf *buf;
-	const u8 *ext_capab = NULL;
 	size_t buf_len;
 	int ret;
 
 	if (wpa_s->wpa_state != WPA_COMPLETED || !wpa_s->current_ssid)
 		return 0;
 
-	if (wpa_s->current_bss)
-		ext_capab = wpa_bss_get_ie(wpa_s->current_bss,
-					   WLAN_EID_EXT_CAPAB);
-
-	if (!ext_capab || ext_capab[1] < 11 || !(ext_capab[12] & 0x20)) {
+	if (!wpa_bss_ext_capab(wpa_s->current_bss, WLAN_EXT_CAPAB_MSCS)) {
 		wpa_dbg(wpa_s, MSG_INFO,
 			"AP does not support MSCS - could not send MSCS Req");
 		return -1;
diff --git a/wpa_supplicant/rrm.c b/wpa_supplicant/rrm.c
index afc1172..cf107eb 100644
--- a/wpa_supplicant/rrm.c
+++ b/wpa_supplicant/rrm.c
@@ -556,23 +556,32 @@
 static int * wpas_op_class_freqs(const struct oper_class_map *op,
 				 struct hostapd_hw_modes *mode, int active)
 {
-	u8 channels_80mhz[] = { 42, 58, 106, 122, 138, 155 };
-	u8 channels_160mhz[] = { 50, 114 };
+	u8 channels_80mhz_5ghz[] = { 42, 58, 106, 122, 138, 155, 171 };
+	u8 channels_160mhz_5ghz[] = { 50, 114, 163 };
+	u8 channels_80mhz_6ghz[] = { 7, 23, 39, 55, 71, 87, 103, 119, 135, 151,
+				     167, 183, 199, 215 };
+	u8 channels_160mhz_6ghz[] = { 15, 47, 79, 111, 143, 175, 207 };
+	const u8 *channels = NULL;
+	size_t num_chan = 0;
+	bool is_6ghz = is_6ghz_op_class(op->op_class);
 
 	/*
 	 * When adding all channels in the operating class, 80 + 80 MHz
 	 * operating classes are like 80 MHz channels because we add all valid
 	 * channels anyway.
 	 */
-	if (op->bw == BW80 || op->bw == BW80P80)
-		return wpas_add_channels(op, mode, active, channels_80mhz,
-					 ARRAY_SIZE(channels_80mhz));
+	if (op->bw == BW80 || op->bw == BW80P80) {
+		channels = is_6ghz ? channels_80mhz_6ghz : channels_80mhz_5ghz;
+		num_chan = is_6ghz ? ARRAY_SIZE(channels_80mhz_6ghz) :
+			ARRAY_SIZE(channels_80mhz_5ghz);
+	} else if (op->bw == BW160) {
+		channels = is_6ghz ? channels_160mhz_6ghz :
+			channels_160mhz_5ghz;
+		num_chan =  is_6ghz ? ARRAY_SIZE(channels_160mhz_6ghz) :
+			ARRAY_SIZE(channels_160mhz_5ghz);
+	}
 
-	if (op->bw == BW160)
-		return wpas_add_channels(op, mode, active, channels_160mhz,
-					 ARRAY_SIZE(channels_160mhz));
-
-	return wpas_add_channels(op, mode, active, NULL, 0);
+	return wpas_add_channels(op, mode, active, channels, num_chan);
 }
 
 
@@ -766,10 +775,10 @@
 static int wpas_beacon_rep_add_frame_body(struct bitfield *eids,
 					  enum beacon_report_detail detail,
 					  struct wpa_bss *bss, u8 *buf,
-					  size_t buf_len, u8 **ies_buf,
+					  size_t buf_len, const u8 **ies_buf,
 					  size_t *ie_len, int add_fixed)
 {
-	u8 *ies = *ies_buf;
+	const u8 *ies = *ies_buf;
 	size_t ies_len = *ie_len;
 	u8 *pos = buf;
 	int rem_len;
@@ -851,7 +860,7 @@
 				    struct wpa_bss *bss,
 				    struct wpabuf **wpa_buf,
 				    struct rrm_measurement_beacon_report *rep,
-				    u8 **ie, size_t *ie_len, u8 idx)
+				    const u8 **ie, size_t *ie_len, u8 idx)
 {
 	int ret;
 	u8 *buf, *pos;
@@ -918,8 +927,8 @@
 			       u64 start, u64 parent_tsf)
 {
 	struct beacon_rep_data *data = &wpa_s->beacon_rep_data;
-	u8 *ies = (u8 *) (bss + 1);
-	u8 *pos = ies;
+	const u8 *ies = wpa_bss_ie_ptr(bss);
+	const u8 *pos = ies;
 	size_t ies_len = bss->ie_len ? bss->ie_len : bss->beacon_ie_len;
 	struct rrm_measurement_beacon_report rep;
 	u8 idx = 0;
diff --git a/wpa_supplicant/scan.c b/wpa_supplicant/scan.c
index b9e4162..c53474d 100644
--- a/wpa_supplicant/scan.c
+++ b/wpa_supplicant/scan.c
@@ -521,7 +521,7 @@
 {
 	struct wpabuf *default_ies = NULL;
 	u8 ext_capab[18];
-	int ext_capab_len;
+	int ext_capab_len, frame_id;
 	enum wpa_driver_if_type type = WPA_IF_STATION;
 
 #ifdef CONFIG_P2P
@@ -545,6 +545,20 @@
 		wpas_mbo_scan_ie(wpa_s, default_ies);
 #endif /* CONFIG_MBO */
 
+	if (type == WPA_IF_P2P_CLIENT)
+		frame_id = VENDOR_ELEM_PROBE_REQ_P2P;
+	else
+		frame_id = VENDOR_ELEM_PROBE_REQ;
+
+	if (wpa_s->vendor_elem[frame_id]) {
+		size_t len;
+
+		len = wpabuf_len(wpa_s->vendor_elem[frame_id]);
+		if (len > 0 && wpabuf_resize(&default_ies, len) == 0)
+			wpabuf_put_buf(default_ies,
+				       wpa_s->vendor_elem[frame_id]);
+	}
+
 	if (default_ies)
 		wpa_drv_set_default_scan_ies(wpa_s, wpabuf_head(default_ies),
 					     wpabuf_len(default_ies));
@@ -670,30 +684,38 @@
 #endif /* CONFIG_P2P */
 
 
-static void wpa_setband_scan_freqs_list(struct wpa_supplicant *wpa_s,
-					enum hostapd_hw_mode band,
-					struct wpa_driver_scan_params *params,
-					int is_6ghz)
+int wpa_add_scan_freqs_list(struct wpa_supplicant *wpa_s,
+			    enum hostapd_hw_mode band,
+			    struct wpa_driver_scan_params *params, bool is_6ghz)
 {
 	/* Include only supported channels for the specified band */
 	struct hostapd_hw_modes *mode;
-	int count, i;
+	int num_chans = 0;
+	int *freqs, i;
 
 	mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, band, is_6ghz);
-	if (mode == NULL) {
-		/* No channels supported in this band - use empty list */
-		params->freqs = os_zalloc(sizeof(int));
-		return;
+	if (!mode)
+		return -1;
+
+	if (params->freqs) {
+		while (params->freqs[num_chans])
+			num_chans++;
 	}
 
-	params->freqs = os_calloc(mode->num_channels + 1, sizeof(int));
-	if (params->freqs == NULL)
-		return;
-	for (count = 0, i = 0; i < mode->num_channels; i++) {
+	freqs = os_realloc(params->freqs,
+			   (num_chans + mode->num_channels + 1) * sizeof(int));
+	if (!freqs)
+		return -1;
+
+	params->freqs = freqs;
+	for (i = 0; i < mode->num_channels; i++) {
 		if (mode->channels[i].flag & HOSTAPD_CHAN_DISABLED)
 			continue;
-		params->freqs[count++] = mode->channels[i].freq;
+		params->freqs[num_chans++] = mode->channels[i].freq;
 	}
+	params->freqs[num_chans] = 0;
+
+	return 0;
 }
 
 
@@ -704,12 +726,16 @@
 		return; /* unknown what channels the driver supports */
 	if (params->freqs)
 		return; /* already using a limited channel set */
-	if (wpa_s->setband == WPA_SETBAND_5G)
-		wpa_setband_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211A,
-					    params, 0);
-	else if (wpa_s->setband == WPA_SETBAND_2G)
-		wpa_setband_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211G,
-					    params, 0);
+
+	if (wpa_s->setband_mask & WPA_SETBAND_5G)
+		wpa_add_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211A, params,
+					0);
+	if (wpa_s->setband_mask & WPA_SETBAND_2G)
+		wpa_add_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211G, params,
+					0);
+	if (wpa_s->setband_mask & WPA_SETBAND_6G)
+		wpa_add_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211A, params,
+					1);
 }
 
 
@@ -1201,7 +1227,12 @@
 	wpa_setband_scan_freqs(wpa_s, &params);
 
 	/* See if user specified frequencies. If so, scan only those. */
-	if (wpa_s->conf->freq_list && !params.freqs) {
+	if (wpa_s->last_scan_req == INITIAL_SCAN_REQ &&
+	    wpa_s->conf->initial_freq_list && !params.freqs) {
+		wpa_dbg(wpa_s, MSG_DEBUG,
+			"Optimize scan based on conf->initial_freq_list");
+		int_array_concat(&params.freqs, wpa_s->conf->initial_freq_list);
+	} else if (wpa_s->conf->freq_list && !params.freqs) {
 		wpa_dbg(wpa_s, MSG_DEBUG,
 			"Optimize scan based on conf->freq_list");
 		int_array_concat(&params.freqs, wpa_s->conf->freq_list);
@@ -1869,18 +1900,15 @@
 const u8 * wpa_scan_get_vendor_ie(const struct wpa_scan_res *res,
 				  u32 vendor_type)
 {
-	const u8 *end, *pos;
+	const u8 *ies;
+	const struct element *elem;
 
-	pos = (const u8 *) (res + 1);
-	end = pos + res->ie_len;
+	ies = (const u8 *) (res + 1);
 
-	while (end - pos > 1) {
-		if (2 + pos[1] > end - pos)
-			break;
-		if (pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
-		    vendor_type == WPA_GET_BE32(&pos[2]))
-			return pos;
-		pos += 2 + pos[1];
+	for_each_element_id(elem, WLAN_EID_VENDOR_SPECIFIC, ies, res->ie_len) {
+		if (elem->datalen >= 4 &&
+		    vendor_type == WPA_GET_BE32(elem->data))
+			return &elem->id;
 	}
 
 	return NULL;
@@ -1902,22 +1930,20 @@
 const u8 * wpa_scan_get_vendor_ie_beacon(const struct wpa_scan_res *res,
 					 u32 vendor_type)
 {
-	const u8 *end, *pos;
+	const u8 *ies;
+	const struct element *elem;
 
 	if (res->beacon_ie_len == 0)
 		return NULL;
 
-	pos = (const u8 *) (res + 1);
-	pos += res->ie_len;
-	end = pos + res->beacon_ie_len;
+	ies = (const u8 *) (res + 1);
+	ies += res->ie_len;
 
-	while (end - pos > 1) {
-		if (2 + pos[1] > end - pos)
-			break;
-		if (pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
-		    vendor_type == WPA_GET_BE32(&pos[2]))
-			return pos;
-		pos += 2 + pos[1];
+	for_each_element_id(elem, WLAN_EID_VENDOR_SPECIFIC, ies,
+			    res->beacon_ie_len) {
+		if (elem->datalen >= 4 &&
+		    vendor_type == WPA_GET_BE32(elem->data))
+			return &elem->id;
 	}
 
 	return NULL;
@@ -1948,12 +1974,17 @@
 	end = pos + res->ie_len;
 
 	while (end - pos > 1) {
-		if (2 + pos[1] > end - pos)
+		u8 ie, len;
+
+		ie = pos[0];
+		len = pos[1];
+		if (len > end - pos - 2)
 			break;
-		if (pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
-		    vendor_type == WPA_GET_BE32(&pos[2]))
-			wpabuf_put_data(buf, pos + 2 + 4, pos[1] - 4);
-		pos += 2 + pos[1];
+		pos += 2;
+		if (ie == WLAN_EID_VENDOR_SPECIFIC && len >= 4 &&
+		    vendor_type == WPA_GET_BE32(pos))
+			wpabuf_put_data(buf, pos + 4, len - 4);
+		pos += len;
 	}
 
 	if (wpabuf_len(buf) == 0) {
diff --git a/wpa_supplicant/scan.h b/wpa_supplicant/scan.h
index c9ce2ce..8eb5c73 100644
--- a/wpa_supplicant/scan.h
+++ b/wpa_supplicant/scan.h
@@ -86,5 +86,9 @@
 			      const u8 *ies, size_t ies_len, int rate,
 			      int snr);
 void wpa_supplicant_set_default_scan_ies(struct wpa_supplicant *wpa_s);
+int wpa_add_scan_freqs_list(struct wpa_supplicant *wpa_s,
+			    enum hostapd_hw_mode band,
+			    struct wpa_driver_scan_params *params,
+			    bool is_6ghz);
 
 #endif /* SCAN_H */
diff --git a/wpa_supplicant/sme.c b/wpa_supplicant/sme.c
index 7fec1cd..c6cef5b 100644
--- a/wpa_supplicant/sme.c
+++ b/wpa_supplicant/sme.c
@@ -300,7 +300,7 @@
 	*pos++ = WLAN_EID_RRM_ENABLED_CAPABILITIES;
 	*pos++ = rrm_ie_len;
 
-	/* Set supported capabilites flags */
+	/* Set supported capabilities flags */
 	if (wpa_s->drv_rrm_flags & WPA_DRIVER_FLAGS_TX_POWER_INSERTION)
 		*pos |= WLAN_RRM_CAPS_LINK_MEASUREMENT;
 
@@ -1881,13 +1881,11 @@
 #endif /* CONFIG_DPP2 */
 
 	wpa_s->mscs_setup_done = false;
-	if (wpa_s->current_bss && wpa_s->robust_av.valid_config) {
+	if (wpa_bss_ext_capab(wpa_s->current_bss, WLAN_EXT_CAPAB_MSCS) &&
+	    wpa_s->robust_av.valid_config) {
 		struct wpabuf *mscs_ie;
 		size_t mscs_ie_len, buf_len, *wpa_ie_len, max_ie_len;
 
-		if (!wpa_bss_ext_capab(wpa_s->current_bss, WLAN_EXT_CAPAB_MSCS))
-			goto mscs_fail;
-
 		buf_len = 3 +	/* MSCS descriptor IE header */
 			  1 +	/* Request type */
 			  2 +	/* User priority control */
@@ -2462,7 +2460,7 @@
 	int start, end;
 
 	mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes,
-			HOSTAPD_MODE_IEEE80211G, 0);
+			HOSTAPD_MODE_IEEE80211G, false);
 	if (mode == NULL) {
 		/* No channels supported in this band - use empty list */
 		params->freqs = os_zalloc(sizeof(int));
diff --git a/wpa_supplicant/wmm_ac.c b/wpa_supplicant/wmm_ac.c
index 38800cc..d0fdd55 100644
--- a/wpa_supplicant/wmm_ac.c
+++ b/wpa_supplicant/wmm_ac.c
@@ -400,7 +400,7 @@
 
 	req_ac = up_to_ac[params->user_priority];
 
-	/* Requested accesss category must have acm */
+	/* Requested access category must have acm */
 	if (!wpa_s->wmm_ac_assoc_info->ac_params[req_ac].acm) {
 		wpa_printf(MSG_DEBUG, "WMM AC: AC %d is not ACM", req_ac);
 		return 0;
diff --git a/wpa_supplicant/wnm_sta.c b/wpa_supplicant/wnm_sta.c
index 6996b09..1b6c1b4 100644
--- a/wpa_supplicant/wnm_sta.c
+++ b/wpa_supplicant/wnm_sta.c
@@ -552,7 +552,7 @@
 			freq = 2407 + chan * 5;
 		else if (chan == 14)
 			freq = 2484;
-		else if (chan >= 36 && chan <= 169)
+		else if (chan >= 36 && chan <= 177)
 			freq = 5000 + chan * 5;
 	}
 	return freq;
diff --git a/wpa_supplicant/wpa_cli.c b/wpa_supplicant/wpa_cli.c
index 51c9642..b98a833 100644
--- a/wpa_supplicant/wpa_cli.c
+++ b/wpa_supplicant/wpa_cli.c
@@ -493,7 +493,8 @@
 		"p2p_go_max_inactivity", "auto_interworking", "okc", "pmf",
 		"sae_groups", "dtim_period", "beacon_int",
 		"ap_vendor_elements", "ignore_old_scan_res", "freq_list",
-		"scan_cur_freq", "sched_scan_interval",
+		"scan_cur_freq", "scan_res_valid_for_connect",
+		"sched_scan_interval",
 		"tdls_external_control", "osu_dir", "wowlan_triggers",
 		"p2p_search_delay", "mac_addr", "rand_addr_lifetime",
 		"preassoc_mac_addr", "key_mgmt_offload", "passive_scan",
@@ -589,7 +590,8 @@
 		"wps_nfc_dev_pw_id", "ext_password_backend",
 		"p2p_go_max_inactivity", "auto_interworking", "okc", "pmf",
 		"dtim_period", "beacon_int", "ignore_old_scan_res",
-		"scan_cur_freq", "sched_scan_interval",
+		"scan_cur_freq", "scan_res_valid_for_connect",
+		"sched_scan_interval",
 		"sched_scan_start_delay",
 		"tdls_external_control", "osu_dir", "wowlan_triggers",
 		"p2p_search_delay", "mac_addr", "rand_addr_lifetime",
@@ -1288,9 +1290,10 @@
 }
 
 
-static int wpa_cli_cmd_blacklist(struct wpa_ctrl *ctrl, int argc, char *argv[])
+static int wpa_cli_cmd_bssid_ignore(struct wpa_ctrl *ctrl, int argc,
+				    char *argv[])
 {
-	return wpa_cli_cmd(ctrl, "BLACKLIST", 0, argc, argv);
+	return wpa_cli_cmd(ctrl, "BSSID_IGNORE", 0, argc, argv);
 }
 
 
@@ -1406,8 +1409,8 @@
 
 
 static const char *network_fields[] = {
-	"ssid", "scan_ssid", "bssid", "bssid_blacklist",
-	"bssid_whitelist", "psk", "proto", "key_mgmt",
+	"ssid", "scan_ssid", "bssid", "bssid_ignore",
+	"bssid_accept", "psk", "proto", "key_mgmt",
 	"bg_scan_period", "pairwise", "group", "auth_alg", "scan_freq",
 	"freq_list", "max_oper_chwidth", "ht40", "vht", "vht_center_freq1",
 	"vht_center_freq2", "ht", "edmg",
@@ -3066,6 +3069,20 @@
 
 #ifdef CONFIG_DPP2
 
+static int wpa_cli_cmd_dpp_controller_start(struct wpa_ctrl *ctrl, int argc,
+					    char *argv[])
+{
+	return wpa_cli_cmd(ctrl, "DPP_CONTROLLER_START", 1, argc, argv);
+}
+
+
+static int wpa_cli_cmd_dpp_controller_stop(struct wpa_ctrl *ctrl, int argc,
+					    char *argv[])
+{
+	return wpa_ctrl_command(ctrl, "DPP_CONTROLLER_STOP");
+}
+
+
 static int wpa_cli_cmd_dpp_chirp(struct wpa_ctrl *ctrl, int argc,
 				 char *argv[])
 {
@@ -3085,7 +3102,8 @@
 
 static int wpa_ctrl_command_bss(struct wpa_ctrl *ctrl, const char *cmd)
 {
-	char buf[512], *pos, *bssid, *freq, *level, *flags, *ssid;
+	char buf[512], *pos, *bssid = NULL, *freq = NULL, *level = NULL,
+		*flags = NULL, *ssid = NULL;
 	size_t len;
 	int ret, id = -1;
 
@@ -3126,7 +3144,9 @@
 		*pos++ = '\0';
 	}
 	if (id != -1)
-		printf("%s\t%s\t%s\t%s\t%s\n", bssid, freq, level, flags, ssid);
+		printf("%s\t%s\t%s\t%s\t%s\n", bssid ? bssid : "N/A",
+		       freq ? freq : "N/A", level ? level : "N/A",
+		       flags ? flags : "N/A", ssid ? ssid : "N/A");
 	return id;
 }
 
@@ -3155,6 +3175,30 @@
 }
 
 
+#ifdef CONFIG_PASN
+
+static int wpa_cli_cmd_pasn_auth_start(struct wpa_ctrl *ctrl, int argc,
+				       char *argv[])
+{
+	return wpa_cli_cmd(ctrl, "PASN_AUTH_START", 4, argc, argv);
+}
+
+
+static int wpa_cli_cmd_pasn_auth_stop(struct wpa_ctrl *ctrl, int argc,
+				      char *argv[])
+{
+	return wpa_cli_cmd(ctrl, "PASN_AUTH_STOP", 0, argc, argv);
+}
+
+static int wpa_cli_cmd_ptksa_cache_list(struct wpa_ctrl *ctrl, int argc,
+					char *argv[])
+{
+	return wpa_cli_cmd(ctrl, "PTKSA_CACHE_LIST", 0, argc, argv);
+}
+
+#endif /* CONFIG_PASN */
+
+
 enum wpa_cli_cmd_flags {
 	cli_cmd_flag_none		= 0x00,
 	cli_cmd_flag_sensitive		= 0x01
@@ -3281,11 +3325,15 @@
 	{ "bssid", wpa_cli_cmd_bssid, wpa_cli_complete_network_id,
 	  cli_cmd_flag_none,
 	  "<network id> <BSSID> = set preferred BSSID for an SSID" },
-	{ "blacklist", wpa_cli_cmd_blacklist, wpa_cli_complete_bss,
+	{ "bssid_ignore", wpa_cli_cmd_bssid_ignore, wpa_cli_complete_bss,
 	  cli_cmd_flag_none,
-	  "<BSSID> = add a BSSID to the blacklist\n"
-	  "blacklist clear = clear the blacklist\n"
-	  "blacklist = display the blacklist" },
+	  "<BSSID> = add a BSSID to the list of temporarily ignored BSSs\n"
+	  "bssid_ignore clear = clear the list of temporarily ignored BSSIDs\n"
+	  "bssid_ignore = display the list of temporarily ignored BSSIDs" },
+	{ "blacklist", /* deprecated alias for bssid_ignore */
+	  wpa_cli_cmd_bssid_ignore, wpa_cli_complete_bss,
+	  cli_cmd_flag_none,
+	  "= deprecated alias for bssid_ignore" },
 	{ "log_level", wpa_cli_cmd_log_level, NULL,
 	  cli_cmd_flag_none,
 	  "<level> [<timestamp>] = update the log level/timestamp\n"
@@ -3817,6 +3865,12 @@
 	  cli_cmd_flag_none,
 	  "*|<id> = remove DPP pkex information" },
 #ifdef CONFIG_DPP2
+	{ "dpp_controller_start", wpa_cli_cmd_dpp_controller_start, NULL,
+	  cli_cmd_flag_none,
+	  "[tcp_port=<port>] [role=..] = start DPP controller" },
+	{ "dpp_controller_stop", wpa_cli_cmd_dpp_controller_stop, NULL,
+	  cli_cmd_flag_none,
+	  "= stop DPP controller" },
 	{ "dpp_chirp", wpa_cli_cmd_dpp_chirp, NULL,
 	  cli_cmd_flag_none,
 	  "own=<BI ID> iter=<count> = start DPP chirp" },
@@ -3827,6 +3881,17 @@
 #endif /* CONFIG_DPP */
 	{ "all_bss", wpa_cli_cmd_all_bss, NULL, cli_cmd_flag_none,
 	  "= list all BSS entries (scan results)" },
+#ifdef CONFIG_PASN
+	{ "pasn_auth_start", wpa_cli_cmd_pasn_auth_start, NULL,
+	  cli_cmd_flag_none,
+	  "bssid=<BSSID> akmp=<WPA key mgmt> cipher=<WPA cipher> group=<group> nid=<network id> = Start PASN authentication" },
+	{ "pasn_auth_stop", wpa_cli_cmd_pasn_auth_stop, NULL,
+	  cli_cmd_flag_none,
+	  "= Stop PASN authentication" },
+	{ "ptksa_cache_list", wpa_cli_cmd_ptksa_cache_list, NULL,
+	  cli_cmd_flag_none,
+	  "= Get the PTKSA Cache" },
+#endif /* CONFIG_PASN */
 	{ NULL, NULL, NULL, cli_cmd_flag_none, NULL }
 };
 
@@ -4149,6 +4214,8 @@
 		wpa_cli_exec(action_file, ifname, pos);
 	} else if (str_starts(pos, WPS_EVENT_ACTIVE)) {
 		wpa_cli_exec(action_file, ifname, pos);
+	} else if (str_starts(pos, WPS_EVENT_OVERLAP)) {
+		wpa_cli_exec(action_file, ifname, pos);
 	} else if (str_starts(pos, WPS_EVENT_PIN_ACTIVE)) {
 		wpa_cli_exec(action_file, ifname, pos);
 	} else if (str_starts(pos, WPS_EVENT_CANCEL)) {
diff --git a/wpa_supplicant/wpa_supplicant.c b/wpa_supplicant/wpa_supplicant.c
index e1b4b4e..ffe162c 100644
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -41,9 +41,10 @@
 #include "common/hw_features_common.h"
 #include "common/gas_server.h"
 #include "common/dpp.h"
+#include "common/ptksa_cache.h"
 #include "p2p/p2p.h"
 #include "fst/fst.h"
-#include "blacklist.h"
+#include "bssid_ignore.h"
 #include "wpas_glue.h"
 #include "wps_supplicant.h"
 #include "ibss_rsn.h"
@@ -222,7 +223,7 @@
 		bssid = wpa_s->pending_bssid;
 	wpa_msg(wpa_s, MSG_INFO, "Authentication with " MACSTR " timed out.",
 		MAC2STR(bssid));
-	wpa_blacklist_add(wpa_s, bssid);
+	wpa_bssid_ignore_add(wpa_s, bssid);
 	wpas_notify_auth_timeout(wpa_s);
 	wpa_sm_notify_disassoc(wpa_s->wpa);
 	wpa_supplicant_deauthenticate(wpa_s, WLAN_REASON_DEAUTH_LEAVING);
@@ -291,7 +292,7 @@
 {
 	wpa_dbg(wpa_s, MSG_DEBUG, "Cancelling authentication timeout");
 	eloop_cancel_timeout(wpa_supplicant_timeout, wpa_s, NULL);
-	wpa_blacklist_del(wpa_s, wpa_s->bssid);
+	wpa_bssid_ignore_del(wpa_s, wpa_s->bssid);
 	os_free(wpa_s->last_con_fail_realm);
 	wpa_s->last_con_fail_realm = NULL;
 	wpa_s->last_con_fail_realm_len = 0;
@@ -574,9 +575,15 @@
 
 	wmm_ac_clear_saved_tspecs(wpa_s);
 	pmksa_candidate_free(wpa_s->wpa);
+	ptksa_cache_deinit(wpa_s->ptksa);
+	wpa_s->ptksa = NULL;
 	wpa_sm_deinit(wpa_s->wpa);
 	wpa_s->wpa = NULL;
-	wpa_blacklist_clear(wpa_s);
+	wpa_bssid_ignore_clear(wpa_s);
+
+#ifdef CONFIG_PASN
+	wpas_pasn_auth_stop(wpa_s);
+#endif /* CONFIG_PASN */
 
 	wpa_bss_deinit(wpa_s);
 
@@ -727,6 +734,10 @@
 	dpp_global_deinit(wpa_s->dpp);
 	wpa_s->dpp = NULL;
 #endif /* CONFIG_DPP */
+
+#ifdef CONFIG_PASN
+	wpas_pasn_auth_stop(wpa_s);
+#endif /* CONFIG_PASN */
 }
 
 
@@ -1089,13 +1100,19 @@
 void wpa_supplicant_clear_status(struct wpa_supplicant *wpa_s)
 {
 	enum wpa_states old_state = wpa_s->wpa_state;
+	enum wpa_states new_state;
+
+	if (old_state == WPA_SCANNING)
+		new_state = WPA_SCANNING;
+	else
+		new_state = WPA_DISCONNECTED;
 
 	wpa_s->pairwise_cipher = 0;
 	wpa_s->group_cipher = 0;
 	wpa_s->mgmt_group_cipher = 0;
 	wpa_s->key_mgmt = 0;
 	if (wpa_s->wpa_state != WPA_INTERFACE_DISABLED)
-		wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
+		wpa_supplicant_set_state(wpa_s, new_state);
 
 	if (wpa_s->wpa_state != old_state)
 		wpas_notify_state_changed(wpa_s, wpa_s->wpa_state, old_state);
@@ -1190,7 +1207,7 @@
 		wpa_s->reassociate = 1;
 		wpa_supplicant_req_scan(wpa_s, 0, 0);
 	}
-	wpa_blacklist_clear(wpa_s);
+	wpa_bssid_ignore_clear(wpa_s);
 	wpa_dbg(wpa_s, MSG_DEBUG, "Reconfiguration completed");
 	return 0;
 }
@@ -1640,7 +1657,9 @@
 	wpa_sm_set_param(wpa_s->wpa, WPA_PARAM_MFP,
 			 wpas_get_ssid_pmf(wpa_s, ssid));
 #ifdef CONFIG_OCV
-	wpa_sm_set_param(wpa_s->wpa, WPA_PARAM_OCV, ssid->ocv);
+	if ((wpa_s->drv_flags & WPA_DRIVER_FLAGS_SME) ||
+	    (wpa_s->drv_flags2 & WPA_DRIVER_FLAGS2_OCV))
+		wpa_sm_set_param(wpa_s->wpa, WPA_PARAM_OCV, ssid->ocv);
 #endif /* CONFIG_OCV */
 	sae_pwe = wpa_s->conf->sae_pwe;
 	if (ssid->sae_password_id && sae_pwe != 3)
@@ -2127,6 +2146,24 @@
 }
 
 
+int wpas_restore_permanent_mac_addr(struct wpa_supplicant *wpa_s)
+{
+	if (wpa_drv_set_mac_addr(wpa_s, NULL) < 0) {
+		wpa_msg(wpa_s, MSG_INFO,
+			"Could not restore permanent MAC address");
+		return -1;
+	}
+	wpa_s->mac_addr_changed = 0;
+	if (wpa_supplicant_update_mac_addr(wpa_s) < 0) {
+		wpa_msg(wpa_s, MSG_INFO,
+			"Could not update MAC address information");
+		return -1;
+	}
+	wpa_msg(wpa_s, MSG_DEBUG, "Using permanent MAC address");
+	return 0;
+}
+
+
 static void wpas_start_assoc_cb(struct wpa_radio_work *work, int deinit);
 
 /**
@@ -2187,18 +2224,8 @@
 			return;
 		wpa_sm_pmksa_cache_flush(wpa_s->wpa, ssid);
 	} else if (rand_style == 0 && wpa_s->mac_addr_changed) {
-		if (wpa_drv_set_mac_addr(wpa_s, NULL) < 0) {
-			wpa_msg(wpa_s, MSG_INFO,
-				"Could not restore permanent MAC address");
+		if (wpas_restore_permanent_mac_addr(wpa_s) < 0)
 			return;
-		}
-		wpa_s->mac_addr_changed = 0;
-		if (wpa_supplicant_update_mac_addr(wpa_s) < 0) {
-			wpa_msg(wpa_s, MSG_INFO,
-				"Could not update MAC address information");
-			return;
-		}
-		wpa_msg(wpa_s, MSG_DEBUG, "Using permanent MAC address");
 	}
 	wpa_s->last_ssid = ssid;
 
@@ -2250,10 +2277,6 @@
 			return;
 		}
 		wpa_s->current_bss = bss;
-		wpa_msg(wpa_s, MSG_INFO, MESH_GROUP_STARTED "ssid=\"%s\" id=%d",
-			wpa_ssid_txt(ssid->ssid, ssid->ssid_len),
-			ssid->id);
-		wpas_notify_mesh_group_started(wpa_s, ssid);
 #else /* CONFIG_MESH */
 		wpa_msg(wpa_s, MSG_ERROR,
 			"mesh mode support not included in the build");
@@ -2277,8 +2300,7 @@
 
 #ifdef CONFIG_TDLS
 	if (bss)
-		wpa_tdls_ap_ies(wpa_s->wpa, (const u8 *) (bss + 1),
-				bss->ie_len);
+		wpa_tdls_ap_ies(wpa_s->wpa, wpa_bss_ie_ptr(bss), bss->ie_len);
 #endif /* CONFIG_TDLS */
 
 #ifdef CONFIG_MBO
@@ -2425,6 +2447,8 @@
 	if (!mode)
 		return;
 
+	freq->channel = channel;
+
 	is_24ghz = hw_mode == HOSTAPD_MODE_IEEE80211G ||
 		hw_mode == HOSTAPD_MODE_IEEE80211B;
 
@@ -3199,13 +3223,11 @@
 		wpa_ie_len += wpa_s->rsnxe_len;
 	}
 
-	if (bss && wpa_s->robust_av.valid_config) {
+	if (wpa_bss_ext_capab(bss, WLAN_EXT_CAPAB_MSCS) &&
+	    wpa_s->robust_av.valid_config) {
 		struct wpabuf *mscs_ie;
 		size_t mscs_ie_len, buf_len;
 
-		if (!wpa_bss_ext_capab(bss, WLAN_EXT_CAPAB_MSCS))
-			goto mscs_fail;
-
 		buf_len = 3 +	/* MSCS descriptor IE header */
 			  1 +	/* Request type */
 			  2 +	/* User priority control */
@@ -3401,7 +3423,7 @@
 	if (hw_mode == NUM_HOSTAPD_MODES)
 		goto fail;
 
-	mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, hw_mode, 0);
+	mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, hw_mode, false);
 	if (!mode)
 		goto fail;
 
@@ -3493,6 +3515,20 @@
 	os_memset(&params, 0, sizeof(params));
 	wpa_s->reassociate = 0;
 	wpa_s->eap_expected_failure = 0;
+
+	/* Starting new association, so clear the possibly used WPA IE from the
+	 * previous association. */
+	wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, NULL, 0);
+	wpa_sm_set_assoc_rsnxe(wpa_s->wpa, NULL, 0);
+	wpa_s->rsnxe_len = 0;
+	wpa_s->mscs_setup_done = false;
+
+	wpa_ie = wpas_populate_assoc_ies(wpa_s, bss, ssid, &params, NULL);
+	if (!wpa_ie) {
+		wpas_connect_work_done(wpa_s);
+		return;
+	}
+
 	if (bss &&
 	    (!wpas_driver_bss_selection(wpa_s) || wpas_wps_searching(wpa_s))) {
 #ifdef CONFIG_IEEE80211R
@@ -3541,19 +3577,6 @@
 
 	wpa_supplicant_cancel_scan(wpa_s);
 
-	/* Starting new association, so clear the possibly used WPA IE from the
-	 * previous association. */
-	wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, NULL, 0);
-	wpa_sm_set_assoc_rsnxe(wpa_s->wpa, NULL, 0);
-	wpa_s->rsnxe_len = 0;
-	wpa_s->mscs_setup_done = false;
-
-	wpa_ie = wpas_populate_assoc_ies(wpa_s, bss, ssid, &params, NULL);
-	if (!wpa_ie) {
-		wpas_connect_work_done(wpa_s);
-		return;
-	}
-
 	wpa_clear_keys(wpa_s, bss ? bss->bssid : NULL);
 	use_crypt = 1;
 	cipher_pairwise = wpa_s->pairwise_cipher;
@@ -3641,8 +3664,8 @@
 	}
 
 	if (bss && ssid->enable_edmg)
-		edmg_ie_oper = get_ie_ext((const u8 *) (bss + 1), bss->ie_len,
-					  WLAN_EID_EXT_EDMG_OPERATION);
+		edmg_ie_oper = wpa_bss_get_ie_ext(bss,
+						  WLAN_EID_EXT_EDMG_OPERATION);
 	else
 		edmg_ie_oper = NULL;
 
@@ -3832,6 +3855,10 @@
 	    wpa_s->current_ssid)
 		params.prev_bssid = prev_bssid;
 
+#ifdef CONFIG_SAE
+	params.sae_pwe = wpa_s->conf->sae_pwe;
+#endif /* CONFIG_SAE */
+
 	ret = wpa_drv_associate(wpa_s, &params);
 	os_free(wpa_ie);
 	if (ret < 0) {
@@ -3990,7 +4017,7 @@
 			wpa_s->ifname);
 		wpas_notify_mesh_group_removed(wpa_s, mconf->meshid,
 					       mconf->meshid_len, reason_code);
-		wpa_supplicant_leave_mesh(wpa_s);
+		wpa_supplicant_leave_mesh(wpa_s, true);
 	}
 #endif /* CONFIG_MESH */
 
@@ -5115,6 +5142,7 @@
 	wpa_s->parent = parent ? parent : wpa_s;
 	wpa_s->p2pdev = wpa_s->parent;
 	wpa_s->sched_scanning = 0;
+	wpa_s->setband_mask = WPA_SETBAND_AUTO;
 
 	dl_list_init(&wpa_s->bss_tmp_disallowed);
 	dl_list_init(&wpa_s->fils_hlp_req);
@@ -5859,7 +5887,7 @@
 		dl_list_for_each(tmp, &radio->work, struct wpa_radio_work,
 				 list) {
 			if (os_strcmp(tmp->type, "scan") == 0 &&
-			    radio->external_scan_running &&
+			    external_scan_running(radio) &&
 			    (((struct wpa_driver_scan_params *)
 			      tmp->ctx)->only_new_results ||
 			     tmp->wpa_s->clear_driver_scan_cache))
@@ -5915,7 +5943,7 @@
 			 * rejected by kernel.
 			 */
 			if (os_strcmp(tmp->type, "scan") == 0 &&
-			    radio->external_scan_running &&
+			    external_scan_running(radio) &&
 			    (((struct wpa_driver_scan_params *)
 			      tmp->ctx)->only_new_results ||
 			     tmp->wpa_s->clear_driver_scan_cache))
@@ -5954,7 +5982,7 @@
 		if (work->started)
 			return; /* already started and still in progress */
 
-		if (wpa_s && wpa_s->radio->external_scan_running) {
+		if (wpa_s && external_scan_running(wpa_s->radio)) {
 			wpa_printf(MSG_DEBUG, "Delay radio work start until externally triggered scan completes");
 			return;
 		}
@@ -6050,6 +6078,10 @@
 		   wpa_s->ifname, radio->name);
 	dl_list_del(&wpa_s->radio_list);
 	radio_remove_works(wpa_s, NULL, 0);
+	/* If the interface that triggered the external scan was removed, the
+	 * external scan is no longer running. */
+	if (wpa_s == radio->external_scan_req_interface)
+		radio->external_scan_req_interface = NULL;
 	wpa_s->radio = NULL;
 	if (!dl_list_empty(&radio->ifaces))
 		return; /* Interfaces remain for this radio */
@@ -6671,8 +6703,12 @@
 
 	wpa_s->disconnected = 1;
 	if (wpa_s->drv_priv) {
-		/* Don't deauthenticate if WoWLAN is enabled */
-		if (!wpa_drv_get_wowlan(wpa_s)) {
+		/*
+		 * Don't deauthenticate if WoWLAN is enable and not explicitly
+		 * been configured to disconnect.
+		 */
+		if (!wpa_drv_get_wowlan(wpa_s) ||
+		    wpa_s->conf->wowlan_disconnect_on_deinit) {
 			wpa_supplicant_deauthenticate(
 				wpa_s, WLAN_REASON_DEAUTH_LEAVING);
 
@@ -6717,7 +6753,7 @@
 
 #ifdef CONFIG_MESH
 	if (wpa_s->ifmsh) {
-		wpa_supplicant_mesh_iface_deinit(wpa_s, wpa_s->ifmsh);
+		wpa_supplicant_mesh_iface_deinit(wpa_s, wpa_s->ifmsh, true);
 		wpa_s->ifmsh = NULL;
 	}
 #endif /* CONFIG_MESH */
@@ -6792,7 +6828,7 @@
 			continue;
 		iface = wpa_supplicant_match_iface(global, ifi->if_name);
 		if (iface) {
-			wpa_s = wpa_supplicant_add_iface(global, iface, NULL);
+			wpa_supplicant_add_iface(global, iface, NULL);
 			os_free(iface);
 		}
 	}
@@ -7375,7 +7411,7 @@
 			continue;
 		if (bss->ssid_len == cbss->ssid_len &&
 		    os_memcmp(bss->ssid, cbss->ssid, bss->ssid_len) == 0 &&
-		    !wpa_blacklist_is_blacklisted(wpa_s, bss->bssid)) {
+		    !wpa_bssid_ignore_is_listed(wpa_s, bss->bssid)) {
 			add_freq(freqs, &num_freqs, bss->freq);
 			if (num_freqs == max_freqs)
 				break;
@@ -7405,7 +7441,7 @@
 	eloop_cancel_timeout(wpa_supplicant_timeout, wpa_s, NULL);
 
 	/*
-	 * There is no point in blacklisting the AP if this event is
+	 * There is no point in ignoring the AP temporarily if this event is
 	 * generated based on local request to disconnect.
 	 */
 	if (wpa_s->own_disconnect_req || wpa_s->own_reconnect_req) {
@@ -7427,13 +7463,13 @@
 	}
 
 	/*
-	 * Add the failed BSSID into the blacklist and speed up next scan
+	 * Add the failed BSSID into the ignore list and speed up next scan
 	 * attempt if there could be other APs that could accept association.
 	 */
-	count = wpa_blacklist_add(wpa_s, bssid);
+	count = wpa_bssid_ignore_add(wpa_s, bssid);
 	if (count == 1 && wpa_s->current_bss) {
 		/*
-		 * This BSS was not in the blacklist before. If there is
+		 * This BSS was not in the ignore list before. If there is
 		 * another BSS available for the same ESS, we should try that
 		 * next. Otherwise, we may as well try this one once more
 		 * before allowing other, likely worse, ESSes to be considered.
@@ -7442,7 +7478,7 @@
 		if (freqs) {
 			wpa_dbg(wpa_s, MSG_DEBUG, "Another BSS in this ESS "
 				"has been seen; try it next");
-			wpa_blacklist_add(wpa_s, bssid);
+			wpa_bssid_ignore_add(wpa_s, bssid);
 			/*
 			 * On the next scan, go through only the known channels
 			 * used in this ESS based on previous scans to speed up
@@ -8100,7 +8136,7 @@
 
 struct hostapd_hw_modes * get_mode(struct hostapd_hw_modes *modes,
 				   u16 num_modes, enum hostapd_hw_mode mode,
-				   int is_6ghz)
+				   bool is_6ghz)
 {
 	u16 i;
 
diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
index 2f1e31b..11d1885 100644
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -366,7 +366,14 @@
 
 # Password (and passphrase, etc.) backend for external storage
 # format: <backend name>[:<optional backend parameters>]
+# Test backend which stores passwords in memory. Should only be used for
+# development purposes.
 #ext_password_backend=test:pw1=password|pw2=testing
+# File-based backend which reads passwords from a file. The parameter
+# identifies the file to read passwords from. The password file follows the
+# format of wpa_supplicant.conf and accepts simple `key=passphrase` formatted
+# passwords.
+#ext_password_backend=file:/path/to/passwords.conf
 
 
 # Disable P2P functionality
@@ -458,6 +465,9 @@
 # 1:  Scan current operating frequency if another VIF on the same radio
 #     is already associated.
 
+# Seconds to consider old scan results valid for association (default: 5)
+#scan_res_valid_for_connect=5
+
 # MAC address policy default
 # 0 = use permanent MAC address
 # 1 = use random MAC address for each ESS connection
@@ -526,7 +536,7 @@
 #go_venue_group=7
 #go_venue_type=1
 
-# Homogenous ESS identifier
+# Homogeneous ESS identifier
 # If this is set, scans will be used to request response only from BSSes
 # belonging to the specified Homogeneous ESS. This is used only if interworking
 # is enabled.
@@ -981,7 +991,8 @@
 # This is a countermeasure against multi-channel man-in-the-middle attacks.
 # Enabling this automatically also enables ieee80211w, if not yet enabled.
 # 0 = disabled (default)
-# 1 = enabled
+# 1 = enabled if wpa_supplicant's SME in use. Otherwise enabled only when the
+#     driver indicates support for operating channel validation.
 #ocv=1
 #
 # auth_alg: list of allowed IEEE 802.11 authentication algorithms
@@ -1482,8 +1493,11 @@
 # 2: do not allow PFS to be used
 #dpp_pfs=0
 
-# Whether Beacon protection is enabled
-# This depends on management frame protection (ieee80211w) being enabled.
+# Whether beacon protection is enabled
+# This depends on management frame protection (ieee80211w) being enabled and
+# beacon protection support indication from the driver.
+# 0 = disabled (default)
+# 1 = enabled
 #beacon_prot=0
 
 # OWE DH Group
@@ -2012,12 +2026,12 @@
 	key_mgmt=NONE
 }
 
-# Example configuration blacklisting two APs - these will be ignored
+# Example configuration ignoring two APs - these will be ignored
 # for this network.
 network={
 	ssid="example"
 	psk="very secret passphrase"
-	bssid_blacklist=02:11:22:33:44:55 02:22:aa:44:55:66
+	bssid_ignore=02:11:22:33:44:55 02:22:aa:44:55:66
 }
 
 # Example configuration limiting AP selection to a specific set of APs;
@@ -2025,7 +2039,7 @@
 network={
 	ssid="example"
 	psk="very secret passphrase"
-	bssid_whitelist=02:55:ae:bc:00:00/ff:ff:ff:ff:00:00 00:00:77:66:55:44/00:00:ff:ff:ff:ff
+	bssid_accept=02:55:ae:bc:00:00/ff:ff:ff:ff:00:00 00:00:77:66:55:44/00:00:ff:ff:ff:ff
 }
 
 # Example config file that will only scan on channel 36.
diff --git a/wpa_supplicant/wpa_supplicant_i.h b/wpa_supplicant/wpa_supplicant_i.h
index 3fcd95a..56adf89 100644
--- a/wpa_supplicant/wpa_supplicant_i.h
+++ b/wpa_supplicant/wpa_supplicant_i.h
@@ -14,6 +14,8 @@
 #include "common/defs.h"
 #include "common/sae.h"
 #include "common/wpa_ctrl.h"
+#include "crypto/sha384.h"
+#include "eapol_supp/eapol_supp_sm.h"
 #include "wps/wps_defs.h"
 #include "config_ssid.h"
 #include "wmm_ac.h"
@@ -47,9 +49,6 @@
 struct wpas_dbus_priv;
 struct wpas_hidl_priv;
 
-/* How many seconds to consider old scan results valid for association. */
-#define SCAN_RES_VALID_FOR_CONNECT 5
-
 /**
  * struct wpa_interface - Parameters for wpa_supplicant_add_iface()
  */
@@ -330,12 +329,23 @@
 struct wpa_radio {
 	char name[16]; /* from driver_ops get_radio_name() or empty if not
 			* available */
-	unsigned int external_scan_running:1;
+	/** NULL if no external scan running. */
+	struct wpa_supplicant *external_scan_req_interface;
 	unsigned int num_active_works;
 	struct dl_list ifaces; /* struct wpa_supplicant::radio_list entries */
 	struct dl_list work; /* struct wpa_radio_work::list entries */
 };
 
+/**
+ * Checks whether an external scan is running on a given radio.
+ * @radio: Pointer to radio struct
+ * Returns: true if an external scan is running, false otherwise.
+ */
+static inline bool external_scan_running(struct wpa_radio *radio)
+{
+	return radio && radio->external_scan_req_interface;
+}
+
 #define MAX_ACTIVE_WORKS 2
 
 
@@ -514,6 +524,54 @@
 	bool valid_config;
 };
 
+#ifdef CONFIG_PASN
+
+struct pasn_fils {
+	u8 nonce[FILS_NONCE_LEN];
+	u8 anonce[FILS_NONCE_LEN];
+	u8 session[FILS_SESSION_LEN];
+	u8 erp_pmkid[PMKID_LEN];
+	bool completed;
+};
+
+struct wpas_pasn {
+	int akmp;
+	int cipher;
+	u16 group;
+	int freq;
+
+	u8 trans_seq;
+	u8 status;
+
+	u8 bssid[ETH_ALEN];
+	size_t pmk_len;
+	u8 pmk[PMK_LEN_MAX];
+	bool using_pmksa;
+
+	u8 hash[SHA384_MAC_LEN];
+
+	struct wpabuf *beacon_rsne_rsnxe;
+	struct wpa_ptk ptk;
+	struct crypto_ecdh *ecdh;
+
+#ifdef CONFIG_SAE
+	struct sae_data sae;
+#endif /* CONFIG_SAE */
+
+	struct wpa_ssid *ssid;
+
+#ifdef CONFIG_FILS
+	struct pasn_fils fils;
+#endif /* CONFIG_FILS */
+
+#ifdef CONFIG_IEEE80211R
+	u8 pmk_r1[PMK_LEN_MAX];
+	size_t pmk_r1_len;
+	u8 pmk_r1_name[WPA_PMK_NAME_LEN];
+#endif /* CONFIG_IEEE80211R */
+};
+#endif /* CONFIG_PASN */
+
 /**
  * struct wpa_supplicant - Internal data for wpa_supplicant interface
  *
@@ -594,7 +652,7 @@
 	struct wpa_ssid_value *disallow_aps_ssid;
 	size_t disallow_aps_ssid_count;
 
-	enum set_band setband;
+	u32 setband_mask;
 
 	/* Preferred network for the next connection attempt */
 	struct wpa_ssid *next_ssid;
@@ -619,6 +677,7 @@
 
 	void (*scan_res_handler)(struct wpa_supplicant *wpa_s,
 				 struct wpa_scan_results *scan_res);
+	void (*scan_res_fail_handler)(struct wpa_supplicant *wpa_s);
 	struct dl_list bss; /* struct wpa_bss::list */
 	struct dl_list bss_id; /* struct wpa_bss::list_id */
 	size_t num_bss;
@@ -638,6 +697,8 @@
 	int interface_removed; /* whether the network interface has been
 				* removed */
 	struct wpa_sm *wpa;
+	struct ptksa_cache *ptksa;
+
 	struct eapol_sm *eapol;
 
 	struct ctrl_iface_priv *ctrl_iface;
@@ -664,7 +725,7 @@
 	unsigned int keys_cleared; /* bitfield of key indexes that the driver is
 				    * known not to be configured with a key */
 
-	struct wpa_blacklist *blacklist;
+	struct wpa_bssid_ignore *bssid_ignore;
 
 	/* Number of connection failures since last successful connection */
 	unsigned int consecutive_conn_failures;
@@ -772,7 +833,7 @@
 	struct wps_er *wps_er;
 	unsigned int wps_run;
 	struct os_reltime wps_pin_start_time;
-	int blacklist_cleared;
+	bool bssid_ignore_cleared;
 
 	struct wpabuf *pending_eapol_rx;
 	struct os_reltime pending_eapol_rx_time;
@@ -1339,6 +1400,11 @@
 	unsigned int multi_ap_fronthaul:1;
 	struct robust_av_data robust_av;
 	bool mscs_setup_done;
+
+#ifdef CONFIG_PASN
+	struct wpas_pasn pasn;
+	struct wpa_radio_work *pasn_auth_work;
+#endif /* CONFIG_PASN */
 };
 
 
@@ -1367,6 +1433,7 @@
 int wpa_supplicant_set_suites(struct wpa_supplicant *wpa_s,
 			      struct wpa_bss *bss, struct wpa_ssid *ssid,
 			      u8 *wpa_ie, size_t *wpa_ie_len);
+int wpas_restore_permanent_mac_addr(struct wpa_supplicant *wpa_s);
 void wpa_supplicant_associate(struct wpa_supplicant *wpa_s,
 			      struct wpa_bss *bss,
 			      struct wpa_ssid *ssid);
@@ -1641,7 +1708,7 @@
 
 struct hostapd_hw_modes * get_mode(struct hostapd_hw_modes *modes,
 				   u16 num_modes, enum hostapd_hw_mode mode,
-				   int is_6ghz);
+				   bool is_6ghz);
 
 void wpa_bss_tmp_disallow(struct wpa_supplicant *wpa_s, const u8 *bssid,
 			  unsigned int sec, int rssi_threshold);
@@ -1673,4 +1740,13 @@
 void wpas_handle_assoc_resp_mscs(struct wpa_supplicant *wpa_s, const u8 *bssid,
 				 const u8 *ies, size_t ies_len);
 
+int wpas_pasn_auth_start(struct wpa_supplicant *wpa_s,
+			 const u8 *bssid, int akmp, int cipher,
+			 u16 group, int network_id);
+void wpas_pasn_auth_stop(struct wpa_supplicant *wpa_s);
+int wpas_pasn_auth_tx_status(struct wpa_supplicant *wpa_s,
+			     const u8 *data, size_t data_len, u8 acked);
+int wpas_pasn_auth_rx(struct wpa_supplicant *wpa_s,
+		      const struct ieee80211_mgmt *mgmt, size_t len);
+
 #endif /* WPA_SUPPLICANT_I_H */
diff --git a/wpa_supplicant/wpas_glue.c b/wpa_supplicant/wpas_glue.c
index 4462afc..b1c606f 100644
--- a/wpa_supplicant/wpas_glue.c
+++ b/wpa_supplicant/wpas_glue.c
@@ -16,6 +16,7 @@
 #include "config.h"
 #include "l2_packet/l2_packet.h"
 #include "common/wpa_common.h"
+#include "common/ptksa_cache.h"
 #include "wpa_supplicant_i.h"
 #include "driver_i.h"
 #include "rsn_supp/pmksa_cache.h"
@@ -1343,6 +1344,15 @@
 #endif /* CONFIG_NO_CONFIG_WRITE */
 }
 
+
+static void wpa_supplicant_store_ptk(void *ctx, u8 *addr, int cipher,
+				     u32 life_time, const struct wpa_ptk *ptk)
+{
+	struct wpa_supplicant *wpa_s = ctx;
+
+	ptksa_cache_add(wpa_s->ptksa, addr, cipher, life_time, ptk);
+}
+
 #endif /* CONFIG_NO_WPA */
 
 
@@ -1350,9 +1360,20 @@
 {
 #ifndef CONFIG_NO_WPA
 	struct wpa_sm_ctx *ctx;
+
+	wpa_s->ptksa = ptksa_cache_init();
+	if (!wpa_s->ptksa) {
+		wpa_printf(MSG_ERROR, "Failed to allocate PTKSA");
+		return -1;
+	}
+
 	ctx = os_zalloc(sizeof(*ctx));
 	if (ctx == NULL) {
 		wpa_printf(MSG_ERROR, "Failed to allocate WPA context.");
+
+		ptksa_cache_deinit(wpa_s->ptksa);
+		wpa_s->ptksa = NULL;
+
 		return -1;
 	}
 
@@ -1396,12 +1417,15 @@
 	ctx->fils_hlp_rx = wpa_supplicant_fils_hlp_rx;
 	ctx->channel_info = wpa_supplicant_channel_info;
 	ctx->transition_disable = wpa_supplicant_transition_disable;
+	ctx->store_ptk = wpa_supplicant_store_ptk;
 
 	wpa_s->wpa = wpa_sm_init(ctx);
 	if (wpa_s->wpa == NULL) {
-		wpa_printf(MSG_ERROR, "Failed to initialize WPA state "
-			   "machine");
+		wpa_printf(MSG_ERROR,
+			   "Failed to initialize WPA state machine");
 		os_free(ctx);
+		ptksa_cache_deinit(wpa_s->ptksa);
+		wpa_s->ptksa = NULL;
 		return -1;
 	}
 #endif /* CONFIG_NO_WPA */
@@ -1451,7 +1475,16 @@
 			conf.fils_cache_id =
 				wpa_bss_get_fils_cache_id(wpa_s->current_bss);
 #endif /* CONFIG_FILS */
-		conf.beacon_prot = ssid->beacon_prot;
+		if ((wpa_s->drv_flags & WPA_DRIVER_FLAGS_BEACON_PROTECTION) ||
+		    (wpa_s->drv_flags2 &
+		     WPA_DRIVER_FLAGS2_BEACON_PROTECTION_CLIENT))
+			conf.beacon_prot = ssid->beacon_prot;
+
+#ifdef CONFIG_PASN
+#ifdef CONFIG_TESTING_OPTIONS
+		conf.force_kdk_derivation = wpa_s->conf->force_kdk_derivation;
+#endif /* CONFIG_TESTING_OPTIONS */
+#endif /* CONFIG_PASN */
 	}
 	wpa_sm_set_config(wpa_s->wpa, ssid ? &conf : NULL);
 }
diff --git a/wpa_supplicant/wpas_module_tests.c b/wpa_supplicant/wpas_module_tests.c
index 1c136f7..ce5398c 100644
--- a/wpa_supplicant/wpas_module_tests.c
+++ b/wpa_supplicant/wpas_module_tests.c
@@ -11,77 +11,77 @@
 #include "utils/common.h"
 #include "utils/module_tests.h"
 #include "wpa_supplicant_i.h"
-#include "blacklist.h"
+#include "bssid_ignore.h"
 
 
-static int wpas_blacklist_module_tests(void)
+static int wpas_bssid_ignore_module_tests(void)
 {
 	struct wpa_supplicant wpa_s;
 	int ret = -1;
 
 	os_memset(&wpa_s, 0, sizeof(wpa_s));
 
-	wpa_blacklist_clear(&wpa_s);
+	wpa_bssid_ignore_clear(&wpa_s);
 
-	if (wpa_blacklist_get(NULL, NULL) != NULL ||
-	    wpa_blacklist_get(NULL, (u8 *) "123456") != NULL ||
-	    wpa_blacklist_get(&wpa_s, NULL) != NULL ||
-	    wpa_blacklist_get(&wpa_s, (u8 *) "123456") != NULL)
+	if (wpa_bssid_ignore_get(NULL, NULL) != NULL ||
+	    wpa_bssid_ignore_get(NULL, (u8 *) "123456") != NULL ||
+	    wpa_bssid_ignore_get(&wpa_s, NULL) != NULL ||
+	    wpa_bssid_ignore_get(&wpa_s, (u8 *) "123456") != NULL)
 		goto fail;
 
-	if (wpa_blacklist_add(NULL, NULL) == 0 ||
-	    wpa_blacklist_add(NULL, (u8 *) "123456") == 0 ||
-	    wpa_blacklist_add(&wpa_s, NULL) == 0)
+	if (wpa_bssid_ignore_add(NULL, NULL) == 0 ||
+	    wpa_bssid_ignore_add(NULL, (u8 *) "123456") == 0 ||
+	    wpa_bssid_ignore_add(&wpa_s, NULL) == 0)
 		goto fail;
 
-	if (wpa_blacklist_del(NULL, NULL) == 0 ||
-	    wpa_blacklist_del(NULL, (u8 *) "123456") == 0 ||
-	    wpa_blacklist_del(&wpa_s, NULL) == 0 ||
-	    wpa_blacklist_del(&wpa_s, (u8 *) "123456") == 0)
+	if (wpa_bssid_ignore_del(NULL, NULL) == 0 ||
+	    wpa_bssid_ignore_del(NULL, (u8 *) "123456") == 0 ||
+	    wpa_bssid_ignore_del(&wpa_s, NULL) == 0 ||
+	    wpa_bssid_ignore_del(&wpa_s, (u8 *) "123456") == 0)
 		goto fail;
 
-	if (wpa_blacklist_add(&wpa_s, (u8 *) "111111") < 0 ||
-	    wpa_blacklist_add(&wpa_s, (u8 *) "111111") < 0 ||
-	    wpa_blacklist_add(&wpa_s, (u8 *) "222222") < 0 ||
-	    wpa_blacklist_add(&wpa_s, (u8 *) "333333") < 0 ||
-	    wpa_blacklist_add(&wpa_s, (u8 *) "444444") < 0 ||
-	    wpa_blacklist_del(&wpa_s, (u8 *) "333333") < 0 ||
-	    wpa_blacklist_del(&wpa_s, (u8 *) "xxxxxx") == 0 ||
-	    wpa_blacklist_get(&wpa_s, (u8 *) "xxxxxx") != NULL ||
-	    wpa_blacklist_get(&wpa_s, (u8 *) "111111") == NULL ||
-	    wpa_blacklist_get(&wpa_s, (u8 *) "222222") == NULL ||
-	    wpa_blacklist_get(&wpa_s, (u8 *) "444444") == NULL ||
-	    wpa_blacklist_del(&wpa_s, (u8 *) "111111") < 0 ||
-	    wpa_blacklist_del(&wpa_s, (u8 *) "222222") < 0 ||
-	    wpa_blacklist_del(&wpa_s, (u8 *) "444444") < 0 ||
-	    wpa_blacklist_add(&wpa_s, (u8 *) "111111") < 0 ||
-	    wpa_blacklist_add(&wpa_s, (u8 *) "222222") < 0 ||
-	    wpa_blacklist_add(&wpa_s, (u8 *) "333333") < 0)
+	if (wpa_bssid_ignore_add(&wpa_s, (u8 *) "111111") < 0 ||
+	    wpa_bssid_ignore_add(&wpa_s, (u8 *) "111111") < 0 ||
+	    wpa_bssid_ignore_add(&wpa_s, (u8 *) "222222") < 0 ||
+	    wpa_bssid_ignore_add(&wpa_s, (u8 *) "333333") < 0 ||
+	    wpa_bssid_ignore_add(&wpa_s, (u8 *) "444444") < 0 ||
+	    wpa_bssid_ignore_del(&wpa_s, (u8 *) "333333") < 0 ||
+	    wpa_bssid_ignore_del(&wpa_s, (u8 *) "xxxxxx") == 0 ||
+	    wpa_bssid_ignore_get(&wpa_s, (u8 *) "xxxxxx") != NULL ||
+	    wpa_bssid_ignore_get(&wpa_s, (u8 *) "111111") == NULL ||
+	    wpa_bssid_ignore_get(&wpa_s, (u8 *) "222222") == NULL ||
+	    wpa_bssid_ignore_get(&wpa_s, (u8 *) "444444") == NULL ||
+	    wpa_bssid_ignore_del(&wpa_s, (u8 *) "111111") < 0 ||
+	    wpa_bssid_ignore_del(&wpa_s, (u8 *) "222222") < 0 ||
+	    wpa_bssid_ignore_del(&wpa_s, (u8 *) "444444") < 0 ||
+	    wpa_bssid_ignore_add(&wpa_s, (u8 *) "111111") < 0 ||
+	    wpa_bssid_ignore_add(&wpa_s, (u8 *) "222222") < 0 ||
+	    wpa_bssid_ignore_add(&wpa_s, (u8 *) "333333") < 0)
 		goto fail;
 
-	wpa_blacklist_clear(&wpa_s);
+	wpa_bssid_ignore_clear(&wpa_s);
 
-	if (wpa_blacklist_add(&wpa_s, (u8 *) "111111") < 0 ||
-	    wpa_blacklist_add(&wpa_s, (u8 *) "222222") < 0 ||
-	    wpa_blacklist_add(&wpa_s, (u8 *) "333333") < 0 ||
-	    wpa_blacklist_add(&wpa_s, (u8 *) "444444") < 0 ||
-	    !wpa_blacklist_is_blacklisted(&wpa_s, (u8 *) "111111") ||
-	    wpa_blacklist_del(&wpa_s, (u8 *) "111111") < 0 ||
-	    wpa_blacklist_is_blacklisted(&wpa_s, (u8 *) "111111") ||
-	    wpa_blacklist_add(&wpa_s, (u8 *) "111111") < 0)
+	if (wpa_bssid_ignore_add(&wpa_s, (u8 *) "111111") < 0 ||
+	    wpa_bssid_ignore_add(&wpa_s, (u8 *) "222222") < 0 ||
+	    wpa_bssid_ignore_add(&wpa_s, (u8 *) "333333") < 0 ||
+	    wpa_bssid_ignore_add(&wpa_s, (u8 *) "444444") < 0 ||
+	    !wpa_bssid_ignore_is_listed(&wpa_s, (u8 *) "111111") ||
+	    wpa_bssid_ignore_del(&wpa_s, (u8 *) "111111") < 0 ||
+	    wpa_bssid_ignore_is_listed(&wpa_s, (u8 *) "111111") ||
+	    wpa_bssid_ignore_add(&wpa_s, (u8 *) "111111") < 0)
 		goto fail;
 
-	wpa_blacklist_update(&wpa_s);
+	wpa_bssid_ignore_update(&wpa_s);
 
-	if (!wpa_blacklist_is_blacklisted(&wpa_s, (u8 *) "111111"))
+	if (!wpa_bssid_ignore_is_listed(&wpa_s, (u8 *) "111111"))
 		goto fail;
 
 	ret = 0;
 fail:
-	wpa_blacklist_clear(&wpa_s);
+	wpa_bssid_ignore_clear(&wpa_s);
 
 	if (ret)
-		wpa_printf(MSG_ERROR, "blacklist module test failure");
+		wpa_printf(MSG_ERROR, "bssid_ignore module test failure");
 
 	return ret;
 }
@@ -93,7 +93,7 @@
 
 	wpa_printf(MSG_INFO, "wpa_supplicant module tests");
 
-	if (wpas_blacklist_module_tests() < 0)
+	if (wpas_bssid_ignore_module_tests() < 0)
 		ret = -1;
 
 #ifdef CONFIG_WPS
diff --git a/wpa_supplicant/wps_supplicant.c b/wpa_supplicant/wps_supplicant.c
index 47d85dc..1dd3d82 100644
--- a/wpa_supplicant/wps_supplicant.c
+++ b/wpa_supplicant/wps_supplicant.c
@@ -26,7 +26,7 @@
 #include "wpa_supplicant_i.h"
 #include "driver_i.h"
 #include "notify.h"
-#include "blacklist.h"
+#include "bssid_ignore.h"
 #include "bss.h"
 #include "scan.h"
 #include "ap.h"
@@ -94,14 +94,14 @@
 		wpa_printf(MSG_DEBUG, "WPS: PIN registration with " MACSTR
 			   " did not succeed - continue trying to find "
 			   "suitable AP", MAC2STR(bssid));
-		wpa_blacklist_add(wpa_s, bssid);
+		wpa_bssid_ignore_add(wpa_s, bssid);
 
 		wpa_supplicant_deauthenticate(wpa_s,
 					      WLAN_REASON_DEAUTH_LEAVING);
 		wpa_s->reassociate = 1;
 		wpa_supplicant_req_scan(wpa_s,
-					wpa_s->blacklist_cleared ? 5 : 0, 0);
-		wpa_s->blacklist_cleared = 0;
+					wpa_s->bssid_ignore_cleared ? 5 : 0, 0);
+		wpa_s->bssid_ignore_cleared = false;
 		return 1;
 	}
 
@@ -1139,7 +1139,7 @@
 	wpa_s->scan_runs = 0;
 	wpa_s->normal_scans = 0;
 	wpa_s->wps_success = 0;
-	wpa_s->blacklist_cleared = 0;
+	wpa_s->bssid_ignore_cleared = false;
 
 	wpa_supplicant_cancel_sched_scan(wpa_s);
 	wpa_supplicant_req_scan(wpa_s, 0, 0);
@@ -2883,10 +2883,11 @@
 
 	for (i = 0; i < wpa_s->num_wps_ap; i++) {
 		struct wps_ap_info *ap = &wpa_s->wps_ap[i];
-		struct wpa_blacklist *e = wpa_blacklist_get(wpa_s, ap->bssid);
+		struct wpa_bssid_ignore *e = wpa_bssid_ignore_get(wpa_s,
+								  ap->bssid);
 
 		wpa_printf(MSG_DEBUG, "WPS: AP[%d] " MACSTR " type=%d "
-			   "tries=%d last_attempt=%d sec ago blacklist=%d",
+			   "tries=%d last_attempt=%d sec ago bssid_ignore=%d",
 			   (int) i, MAC2STR(ap->bssid), ap->type, ap->tries,
 			   ap->last_attempt.sec > 0 ?
 			   (int) now.sec - (int) ap->last_attempt.sec : -1,
@@ -2948,7 +2949,7 @@
 				   MAC2STR(res->bssid), ap->type, type);
 			ap->type = type;
 			if (type != WPS_AP_NOT_SEL_REG)
-				wpa_blacklist_del(wpa_s, ap->bssid);
+				wpa_bssid_ignore_del(wpa_s, ap->bssid);
 		}
 		ap->pbc_active = pbc_active;
 		if (uuid)