Cumulative patch from commit f5728d0a82d5c5fb5347e41ce761fdf4a79772ec
f5728d0 nl80211: Fix segfault when params->freq is NULL for AP mode start
3388e7b mesh: Remove HT IEs if HT is disabled
4ac2ea5 mesh: Make DTIM period configurable
fac72f9 mesh: Stop joining to different frequency network
7035162 mesh: Join an existing MBSS instead of creating a new one
58fe015 gitignore static library files
0f282c7 P2Ps: Clear existing value when peer stops sending adv_service_instance
4d7aab7 Make driver flags available through control interface
77d468e P2P: Cleanup by removing unnecessary os_free() call from p2p_deinit()
e347caf mesh: Report mesh peer AID to kernel
e3227c3 Sync with mac80211-next.git include/uapi/linux/nl80211.h
6c34b9c Assign QCA vendor attribute for setting TX fail count threshold
52fec36 Assign QCA vendor attributes for set retry configuration
1c8fe68 QCA vendor command to configure conditional switch channel for AP
34a5014 MBO: Remove unused assignment
f8608fa SME: Fix SA Query local failure handling
ab6ab07 Clear wpa_s->sme.last_unprot_disconnect.sec on FLUSH command
9636b07 HS 2.0: Add an event message to note failed OSU provider write
460e5cd OpenSSL: Fix OpenSSL 1.1.0 DH operation
dd20eab HS 2.0: Add optional no-scan parameter to FETCH_OSU
f465c32 Interworking: Define control interface message prefixes in wpa_ctrl.h
99a9423 HS 2.0: Make hs20_build_anqp_req() static
75b2a87 HS 2.0: Fix hs20_get_icon() error path
0da9869 Interworking: Remove unused allow_excluded from interworking_connect()
8329ad4 Fix wpa_config_get_all() error path
f7c04e5 Interworking: Combine identical error returns into a single one
a6f5b19 P2P: Allow P2P listen being offloaded to the driver/firmware
35d6655 nl80211: P2P Listen offload vendor command definitions
ef60f64 Do not exceed scan ssid max size advertised by driver
4ac5f2f Add text name for WPA_KEY_MGMT_WPA_NONE key_mgmt value
f0e8405 nl80211: Provide frequency in EVENT_ASSOC when IBSS is joined
653d227 MBO: Improve supported operating class generation
9607a1a nl80211: Keep QCA vendor extensions together
8bd9099 mesh: Add debug prints on my/peer lid mismatches
78ac368 mesh: Add MPM FSM transitions from ESTAB to HOLDING for {OPN,CNF}_RJCT
0202256 mesh: Update MPM FSM events to match the standard
d02e549 mesh: Rename MPM FSM states to match the standard
1f2f3f1 mesh: Indicate OPN_RJCT event if AES-SIV decrypt fails
e8afaad mesh: Write close reason from Mesh Peering Close to debug log
ee0ad45 mesh: Remove GTKdata and IGTKdata from Mesh Peering Confirm/Close
Change-Id: Ia720dc2e4db8539d566cbc826a5c6cfd26f169e1
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/src/ap/ieee802_11.c b/src/ap/ieee802_11.c
index 98601a8..11f12f9 100644
--- a/src/ap/ieee802_11.c
+++ b/src/ap/ieee802_11.c
@@ -1385,6 +1385,9 @@
return 0;
}
+ if (TEST_FAIL())
+ return -1;
+
for (i = 0; i < AID_WORDS; i++) {
if (hapd->sta_aid[i] == (u32) -1)
continue;
diff --git a/src/ap/sta_info.h b/src/ap/sta_info.h
index 5d4d0c8..cf3fbb1 100644
--- a/src/ap/sta_info.h
+++ b/src/ap/sta_info.h
@@ -80,6 +80,7 @@
enum mesh_plink_state plink_state;
u16 peer_lid;
u16 my_lid;
+ u16 peer_aid;
u16 mpm_close_reason;
int mpm_retries;
u8 my_nonce[WPA_NONCE_LEN];
diff --git a/src/common/defs.h b/src/common/defs.h
index 6ef929c..4f56794 100644
--- a/src/common/defs.h
+++ b/src/common/defs.h
@@ -320,13 +320,13 @@
#define EAP_MAX_METHODS 8
enum mesh_plink_state {
- PLINK_LISTEN = 1,
- PLINK_OPEN_SENT,
- PLINK_OPEN_RCVD,
+ PLINK_IDLE = 1,
+ PLINK_OPN_SNT,
+ PLINK_OPN_RCVD,
PLINK_CNF_RCVD,
PLINK_ESTAB,
PLINK_HOLDING,
- PLINK_BLOCKED,
+ PLINK_BLOCKED, /* not defined in the IEEE 802.11 standard */
};
enum set_band {
diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index bac87ed..912d1e1 100644
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -89,6 +89,32 @@
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Event used by driver,
* which supports DFS offloading, to indicate a radar pattern has been
* detected. The channel is now unusable.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START: Command used to
+ * start the P2P Listen offload function in device and pass the listen
+ * channel, period, interval, count, device types, and vendor specific
+ * information elements to the device driver and firmware.
+ * Uses the attributes defines in
+ * enum qca_wlan_vendor_attr_p2p_listen_offload.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP: Command/event used to
+ * indicate stop request/response of the P2P Listen offload function in
+ * device. As an event, it indicates either the feature stopped after it
+ * was already running or feature has actually failed to start. Uses the
+ * attributes defines in enum qca_wlan_vendor_attr_p2p_listen_offload.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH: After AP starts
+ * beaconing, this sub command provides the driver, the frequencies on the
+ * 5 GHz band to check for any radar activity. Driver selects one channel
+ * from this priority list provided through
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST and starts
+ * to check for radar activity on it. If no radar activity is detected
+ * during the channel availability check period, driver internally switches
+ * to the selected frequency of operation. If the frequency is zero, driver
+ * internally selects a channel. The status of this conditional switch is
+ * indicated through an event using the same sub command through
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS. Attributes are
+ * listed in qca_wlan_vendor_attr_sap_conditional_chan_switch.
*/
enum qca_nl80211_vendor_subcmds {
QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
@@ -171,6 +197,9 @@
QCA_NL80211_VENDOR_SUBCMD_TSF = 119,
QCA_NL80211_VENDOR_SUBCMD_WISA = 120,
/* 121 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START = 122,
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP = 123,
+ QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH = 124,
};
@@ -227,6 +256,43 @@
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1
};
+enum qca_wlan_vendor_attr_p2p_listen_offload {
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INVALID = 0,
+ /* A 32-bit unsigned value; the P2P listen frequency (MHz); must be one
+ * of the social channels.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL,
+ /* A 32-bit unsigned value; the P2P listen offload period (ms).
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD,
+ /* A 32-bit unsigned value; the P2P listen interval duration (ms).
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL,
+ /* A 32-bit unsigned value; number of interval times the firmware needs
+ * to run the offloaded P2P listen operation before it stops.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT,
+ /* An array of arbitrary binary data with one or more 8-byte values.
+ * The device types include both primary and secondary device types.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES,
+ /* An array of unsigned 8-bit characters; vendor information elements.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE,
+ /* A 32-bit unsigned value; a control flag to indicate whether listen
+ * results need to be flushed to wpa_supplicant.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CTRL_FLAG,
+ /* A 8-bit unsigned value; reason code for P2P listen offload stop
+ * event.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX =
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST - 1
+};
+
enum qca_wlan_vendor_attr_acs_offload {
QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL,
@@ -265,12 +331,19 @@
* band selection based on channel selection results.
* @QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS: Device supports
* simultaneous off-channel operations.
+ * @QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD: Device supports P2P
+ * Listen offload; a mechanism where the station's firmware takes care of
+ * responding to incoming Probe Request frames received from other P2P
+ * Devices whilst in Listen state, rather than having the user space
+ * wpa_supplicant do it. Information from received P2P requests are
+ * forwarded from firmware to host whenever the host processor wakes up.
* @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits
*/
enum qca_wlan_vendor_features {
QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD = 0,
QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY = 1,
QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS = 2,
+ QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD = 3,
NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */
};
@@ -576,6 +649,25 @@
/* 8-bit unsigned value to configure the maximum RX MPDU for
* aggregation. */
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION,
+ /* 8-bit unsigned value to configure the Non aggregrate/11g sw
+ * retry threshold (0 disable, 31 max). */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY,
+ /* 8-bit unsigned value to configure the aggregrate sw
+ * retry threshold (0 disable, 31 max). */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY,
+ /* 8-bit unsigned value to configure the MGMT frame
+ * retry threshold (0 disable, 31 max). */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY,
+ /* 8-bit unsigned value to configure the CTRL frame
+ * retry threshold (0 disable, 31 max). */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY,
+ /* 8-bit unsigned value to configure the propagation delay for
+ * 2G/5G band (0~63, units in us) */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY,
+ /* Unsigned 32-bit value to configure the number of unicast TX fail
+ * packet count. The peer is disconnected once this threshold is
+ * reached. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT,
/* keep last */
QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
@@ -602,4 +694,23 @@
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST - 1,
};
+/**
+ * enum qca_wlan_vendor_attr_sap_conditional_chan_switch - Parameters for AP
+ * conditional channel switch
+ */
+enum qca_wlan_vendor_attr_sap_conditional_chan_switch {
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID = 0,
+ /* Priority based frequency list (an array of u32 values in host byte
+ * order) */
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST = 1,
+ /* Status of the conditional switch (u32).
+ * 0: Success, Non-zero: Failure
+ */
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS = 2,
+
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_MAX =
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST - 1,
+};
+
#endif /* QCA_VENDOR_H */
diff --git a/src/common/wpa_common.c b/src/common/wpa_common.c
index d6295b2..299b8bb 100644
--- a/src/common/wpa_common.c
+++ b/src/common/wpa_common.c
@@ -1184,6 +1184,8 @@
"WPA2-PSK" : "WPA-PSK";
case WPA_KEY_MGMT_NONE:
return "NONE";
+ case WPA_KEY_MGMT_WPA_NONE:
+ return "WPA-NONE";
case WPA_KEY_MGMT_IEEE8021X_NO_WPA:
return "IEEE 802.1X (no WPA)";
#ifdef CONFIG_IEEE80211R
diff --git a/src/common/wpa_ctrl.h b/src/common/wpa_ctrl.h
index df26c7b..4dcba81 100644
--- a/src/common/wpa_ctrl.h
+++ b/src/common/wpa_ctrl.h
@@ -228,6 +228,11 @@
/* parameters: <addr> <result> */
#define ANQP_QUERY_DONE "ANQP-QUERY-DONE "
+#define RX_ANQP "RX-ANQP "
+#define RX_HS20_ANQP "RX-HS20-ANQP "
+#define RX_HS20_ANQP_ICON "RX-HS20-ANQP-ICON "
+#define RX_HS20_ICON "RX-HS20-ICON "
+
#define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION "
#define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE "
@@ -271,6 +276,9 @@
#define AP_CSA_FINISHED "AP-CSA-FINISHED "
+#define P2P_EVENT_LISTEN_OFFLOAD_STOP "P2P-LISTEN-OFFLOAD-STOPPED "
+#define P2P_LISTEN_OFFLOAD_STOP_REASON "P2P-LISTEN-OFFLOAD-STOP-REASON "
+
/* BSS Transition Management Response frame received */
#define BSS_TM_RESP "BSS-TM-RESP "
diff --git a/src/crypto/crypto_openssl.c b/src/crypto/crypto_openssl.c
index fde154f..7f33686 100644
--- a/src/crypto/crypto_openssl.c
+++ b/src/crypto/crypto_openssl.c
@@ -754,7 +754,7 @@
priv_key = BN_bin2bn(wpabuf_head(priv), wpabuf_len(priv), NULL);
pub_key = BN_bin2bn(wpabuf_head(publ), wpabuf_len(publ), NULL);
- if (!priv_key || !pub_key || DH_set0_key(dh, pub_key, priv_key) != 0)
+ if (!priv_key || !pub_key || DH_set0_key(dh, pub_key, priv_key) != 1)
goto err;
pub_key = NULL;
priv_key = NULL;
diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index a9dbdef..a85ed32 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -1135,6 +1135,7 @@
int ie_len;
struct hostapd_freq_params freq;
int beacon_int;
+ int dtim_period;
int max_peer_links;
struct wpa_driver_mesh_bss_params conf;
#define WPA_DRIVER_MESH_FLAG_USER_MPM 0x00000001
@@ -1278,6 +1279,8 @@
#define WPA_DRIVER_FLAGS_OFFCHANNEL_SIMULTANEOUS 0x0000008000000000ULL
/** Driver supports full AP client state */
#define WPA_DRIVER_FLAGS_FULL_AP_CLIENT_STATE 0x0000010000000000ULL
+/** Driver supports P2P Listen offload */
+#define WPA_DRIVER_FLAGS_P2P_LISTEN_OFFLOAD 0x0000020000000000ULL
u64 flags;
#define FULL_AP_CLIENT_STATE_SUPP(drv_flags) \
@@ -1423,6 +1426,7 @@
u32 flags_mask; /* unset bits in flags */
#ifdef CONFIG_MESH
enum mesh_plink_state plink_state;
+ u16 peer_aid;
#endif /* CONFIG_MESH */
int set; /* Set STA parameters instead of add */
u8 qosinfo;
@@ -3573,6 +3577,32 @@
int (*get_ext_capab)(void *priv, enum wpa_driver_if_type type,
const u8 **ext_capab, const u8 **ext_capab_mask,
unsigned int *ext_capab_len);
+
+ /**
+ * p2p_lo_start - Start offloading P2P listen to device
+ * @priv: Private driver interface data
+ * @freq: Listening frequency (MHz) for P2P listen
+ * @period: Length of the listen operation in milliseconds
+ * @interval: Interval for running the listen operation in milliseconds
+ * @count: Number of times to run the listen operation
+ * @device_types: Device primary and secondary types
+ * @dev_types_len: Number of bytes for device_types
+ * @ies: P2P IE and WSC IE for Probe Response frames
+ * @ies_len: Length of ies in bytes
+ * Returns: 0 on success or -1 on failure
+ */
+ int (*p2p_lo_start)(void *priv, unsigned int freq,
+ unsigned int period, unsigned int interval,
+ unsigned int count,
+ const u8 *device_types, size_t dev_types_len,
+ const u8 *ies, size_t ies_len);
+
+ /**
+ * p2p_lo_stop - Stop P2P listen offload
+ * @priv: Private driver interface data
+ * Returns: 0 on success or -1 on failure
+ */
+ int (*p2p_lo_stop)(void *priv);
};
@@ -4057,6 +4087,11 @@
* on a DFS frequency by a driver that supports DFS Offload.
*/
EVENT_DFS_CAC_STARTED,
+
+ /**
+ * EVENT_P2P_LO_STOP - Notify that P2P listen offload is stopped
+ */
+ EVENT_P2P_LO_STOP,
};
@@ -4782,6 +4817,27 @@
u16 ch_width;
enum hostapd_hw_mode hw_mode;
} acs_selected_channels;
+
+ /**
+ * struct p2p_lo_stop - Reason code for P2P Listen offload stop event
+ * @reason_code: Reason for stopping offload
+ * P2P_LO_STOPPED_REASON_COMPLETE: Listen offload finished as
+ * scheduled.
+ * P2P_LO_STOPPED_REASON_RECV_STOP_CMD: Host requested offload to
+ * be stopped.
+ * P2P_LO_STOPPED_REASON_INVALID_PARAM: Invalid listen offload
+ * parameters.
+ * P2P_LO_STOPPED_REASON_NOT_SUPPORTED: Listen offload not
+ * supported by device.
+ */
+ struct p2p_lo_stop {
+ enum {
+ P2P_LO_STOPPED_REASON_COMPLETE = 0,
+ P2P_LO_STOPPED_REASON_RECV_STOP_CMD,
+ P2P_LO_STOPPED_REASON_INVALID_PARAM,
+ P2P_LO_STOPPED_REASON_NOT_SUPPORTED,
+ } reason_code;
+ } p2p_lo_stop;
};
/**
@@ -4861,6 +4917,8 @@
struct wowlan_triggers *
wpa_get_wowlan_triggers(const char *wowlan_triggers,
const struct wpa_driver_capa *capa);
+/* Convert driver flag to string */
+const char * driver_flag_to_string(u64 flag);
/* NULL terminated array of linked in driver wrappers */
extern const struct wpa_driver_ops *const wpa_drivers[];
diff --git a/src/drivers/driver_common.c b/src/drivers/driver_common.c
index b32d35f..c7107ba 100644
--- a/src/drivers/driver_common.c
+++ b/src/drivers/driver_common.c
@@ -80,6 +80,7 @@
E2S(NEW_PEER_CANDIDATE);
E2S(ACS_CHANNEL_SELECTED);
E2S(DFS_CAC_STARTED);
+ E2S(P2P_LO_STOP);
}
return "UNKNOWN";
@@ -218,3 +219,55 @@
os_free(buf);
return triggers;
}
+
+
+const char * driver_flag_to_string(u64 flag)
+{
+#define DF2S(x) case WPA_DRIVER_FLAGS_ ## x: return #x
+ switch (flag) {
+ DF2S(DRIVER_IE);
+ DF2S(SET_KEYS_AFTER_ASSOC);
+ DF2S(DFS_OFFLOAD);
+ DF2S(4WAY_HANDSHAKE);
+ DF2S(WIRED);
+ DF2S(SME);
+ DF2S(AP);
+ DF2S(SET_KEYS_AFTER_ASSOC_DONE);
+ DF2S(HT_2040_COEX);
+ DF2S(P2P_CONCURRENT);
+ DF2S(P2P_DEDICATED_INTERFACE);
+ DF2S(P2P_CAPABLE);
+ DF2S(AP_TEARDOWN_SUPPORT);
+ DF2S(P2P_MGMT_AND_NON_P2P);
+ DF2S(SANE_ERROR_CODES);
+ DF2S(OFFCHANNEL_TX);
+ DF2S(EAPOL_TX_STATUS);
+ DF2S(DEAUTH_TX_STATUS);
+ DF2S(BSS_SELECTION);
+ DF2S(TDLS_SUPPORT);
+ DF2S(TDLS_EXTERNAL_SETUP);
+ DF2S(PROBE_RESP_OFFLOAD);
+ DF2S(AP_UAPSD);
+ DF2S(INACTIVITY_TIMER);
+ DF2S(AP_MLME);
+ DF2S(SAE);
+ DF2S(OBSS_SCAN);
+ DF2S(IBSS);
+ DF2S(RADAR);
+ DF2S(DEDICATED_P2P_DEVICE);
+ DF2S(QOS_MAPPING);
+ DF2S(AP_CSA);
+ DF2S(MESH);
+ DF2S(ACS_OFFLOAD);
+ DF2S(KEY_MGMT_OFFLOAD);
+ DF2S(TDLS_CHANNEL_SWITCH);
+ DF2S(HT_IBSS);
+ DF2S(VHT_IBSS);
+ DF2S(SUPPORT_HW_MODE_ANY);
+ DF2S(OFFCHANNEL_SIMULTANEOUS);
+ DF2S(FULL_AP_CLIENT_STATE);
+ DF2S(P2P_LISTEN_OFFLOAD);
+ }
+ return "UNKNOWN";
+#undef DF2S
+}
diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index c89665b..ae40f42 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -3468,6 +3468,17 @@
}
+static int nl80211_put_dtim_period(struct nl_msg *msg, int dtim_period)
+{
+ if (dtim_period > 0) {
+ wpa_printf(MSG_DEBUG, " * dtim_period=%d", dtim_period);
+ return nla_put_u32(msg, NL80211_ATTR_DTIM_PERIOD, dtim_period);
+ }
+
+ return 0;
+}
+
+
static int wpa_driver_nl80211_set_ap(void *priv,
struct wpa_driver_ap_params *params)
{
@@ -3504,7 +3515,7 @@
nla_put(msg, NL80211_ATTR_BEACON_TAIL, params->tail_len,
params->tail) ||
nl80211_put_beacon_int(msg, params->beacon_int) ||
- nla_put_u32(msg, NL80211_ATTR_DTIM_PERIOD, params->dtim_period) ||
+ nl80211_put_dtim_period(msg, params->dtim_period) ||
nla_put(msg, NL80211_ATTR_SSID, params->ssid_len, params->ssid))
goto fail;
if (params->proberesp && params->proberesp_len) {
@@ -3695,7 +3706,7 @@
"nl80211: Frequency set succeeded for ht2040 coex");
bss->bandwidth = params->freq->bandwidth;
}
- } else if (!beacon_set) {
+ } else if (!beacon_set && params->freq) {
/*
* cfg80211 updates the driver on frequence change in AP
* mode only at the point when beaconing is started, so
@@ -3777,6 +3788,12 @@
wpa_printf(MSG_DEBUG, " * channel_type=%d", ct);
if (nla_put_u32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE, ct))
return -ENOBUFS;
+ } else {
+ wpa_printf(MSG_DEBUG, " * channel_type=%d",
+ NL80211_CHAN_NO_HT);
+ if (nla_put_u32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE,
+ NL80211_CHAN_NO_HT))
+ return -ENOBUFS;
}
return 0;
}
@@ -3839,11 +3856,11 @@
static u32 sta_plink_state_nl80211(enum mesh_plink_state state)
{
switch (state) {
- case PLINK_LISTEN:
+ case PLINK_IDLE:
return NL80211_PLINK_LISTEN;
- case PLINK_OPEN_SENT:
+ case PLINK_OPN_SNT:
return NL80211_PLINK_OPN_SNT;
- case PLINK_OPEN_RCVD:
+ case PLINK_OPN_RCVD:
return NL80211_PLINK_OPN_RCVD;
case PLINK_CNF_RCVD:
return NL80211_PLINK_CNF_RCVD;
@@ -4032,6 +4049,15 @@
if (!(params->flags & WPA_STA_ASSOCIATED))
upd.mask |= BIT(NL80211_STA_FLAG_ASSOCIATED);
}
+#ifdef CONFIG_MESH
+ } else {
+ if (params->plink_state == PLINK_ESTAB && params->peer_aid) {
+ ret = nla_put_u16(msg, NL80211_ATTR_MESH_PEER_AID,
+ params->peer_aid);
+ if (ret)
+ goto fail;
+ }
+#endif /* CONFIG_MESH */
}
wpa_printf(MSG_DEBUG, " * flags set=0x%x mask=0x%x",
@@ -8391,7 +8417,8 @@
nl80211_put_freq_params(msg, ¶ms->freq) ||
nl80211_put_basic_rates(msg, params->basic_rates) ||
nl80211_put_mesh_id(msg, params->meshid, params->meshid_len) ||
- nl80211_put_beacon_int(msg, params->beacon_int))
+ nl80211_put_beacon_int(msg, params->beacon_int) ||
+ nl80211_put_dtim_period(msg, params->dtim_period))
goto fail;
wpa_printf(MSG_DEBUG, " * flags=%08X", params->flags);
@@ -9117,6 +9144,89 @@
return 0;
}
+
+static int nl80211_p2p_lo_start(void *priv, unsigned int freq,
+ unsigned int period, unsigned int interval,
+ unsigned int count, const u8 *device_types,
+ size_t dev_types_len,
+ const u8 *ies, size_t ies_len)
+{
+ struct i802_bss *bss = priv;
+ struct wpa_driver_nl80211_data *drv = bss->drv;
+ struct nl_msg *msg;
+ struct nlattr *container;
+ int ret;
+
+ wpa_printf(MSG_DEBUG,
+ "nl80211: Start P2P Listen offload: freq=%u, period=%u, interval=%u, count=%u",
+ freq, period, interval, count);
+
+ if (!(drv->capa.flags & WPA_DRIVER_FLAGS_P2P_LISTEN_OFFLOAD))
+ return -1;
+
+ if (!(msg = nl80211_drv_msg(drv, 0, NL80211_CMD_VENDOR)) ||
+ nla_put_u32(msg, NL80211_ATTR_VENDOR_ID, OUI_QCA) ||
+ nla_put_u32(msg, NL80211_ATTR_VENDOR_SUBCMD,
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START))
+ goto fail;
+
+ container = nla_nest_start(msg, NL80211_ATTR_VENDOR_DATA);
+ if (!container)
+ goto fail;
+
+ if (nla_put_u32(msg, QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL,
+ freq) ||
+ nla_put_u32(msg, QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD,
+ period) ||
+ nla_put_u32(msg, QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL,
+ interval) ||
+ nla_put_u32(msg, QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT,
+ count) ||
+ nla_put(msg, QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES,
+ dev_types_len, device_types) ||
+ nla_put(msg, QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE,
+ ies_len, ies))
+ goto fail;
+
+ nla_nest_end(msg, container);
+ ret = send_and_recv_msgs(drv, msg, NULL, NULL);
+ msg = NULL;
+ if (ret) {
+ wpa_printf(MSG_DEBUG,
+ "nl80211: Failed to send P2P Listen offload vendor command");
+ goto fail;
+ }
+
+ return 0;
+
+fail:
+ nlmsg_free(msg);
+ return -1;
+}
+
+
+static int nl80211_p2p_lo_stop(void *priv)
+{
+ struct i802_bss *bss = priv;
+ struct wpa_driver_nl80211_data *drv = bss->drv;
+ struct nl_msg *msg;
+
+ wpa_printf(MSG_DEBUG, "nl80211: Stop P2P Listen offload");
+
+ if (!(drv->capa.flags & WPA_DRIVER_FLAGS_P2P_LISTEN_OFFLOAD))
+ return -1;
+
+ if (!(msg = nl80211_drv_msg(drv, 0, NL80211_CMD_VENDOR)) ||
+ nla_put_u32(msg, NL80211_ATTR_VENDOR_ID, OUI_QCA) ||
+ nla_put_u32(msg, NL80211_ATTR_VENDOR_SUBCMD,
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP)) {
+ nlmsg_free(msg);
+ return -1;
+ }
+
+ return send_and_recv_msgs(drv, msg, NULL, NULL);
+}
+
#endif /* CONFIG_DRIVER_NL80211_QCA */
@@ -9338,9 +9448,6 @@
.vendor_cmd = nl80211_vendor_cmd,
.set_qos_map = nl80211_set_qos_map,
.set_wowlan = nl80211_set_wowlan,
-#ifdef CONFIG_DRIVER_NL80211_QCA
- .roaming = nl80211_roaming,
-#endif /* CONFIG_DRIVER_NL80211_QCA */
.set_mac_addr = nl80211_set_mac_addr,
#ifdef CONFIG_MESH
.init_mesh = wpa_driver_nl80211_init_mesh,
@@ -9355,10 +9462,13 @@
.del_tx_ts = nl80211_del_ts,
.get_ifindex = nl80211_get_ifindex,
#ifdef CONFIG_DRIVER_NL80211_QCA
+ .roaming = nl80211_roaming,
.do_acs = wpa_driver_do_acs,
.set_band = nl80211_set_band,
.get_pref_freq_list = nl80211_get_pref_freq_list,
.set_prob_oper_freq = nl80211_set_prob_oper_freq,
+ .p2p_lo_start = nl80211_p2p_lo_start,
+ .p2p_lo_stop = nl80211_p2p_lo_stop,
#endif /* CONFIG_DRIVER_NL80211_QCA */
.configure_data_frame_filters = nl80211_configure_data_frame_filters,
.get_ext_capab = nl80211_get_ext_capab,
diff --git a/src/drivers/driver_nl80211_capa.c b/src/drivers/driver_nl80211_capa.c
index 1ebbdaa..1134886 100644
--- a/src/drivers/driver_nl80211_capa.c
+++ b/src/drivers/driver_nl80211_capa.c
@@ -972,6 +972,8 @@
if (check_feature(QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS,
&info))
drv->capa.flags |= WPA_DRIVER_FLAGS_OFFCHANNEL_SIMULTANEOUS;
+ if (check_feature(QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD, &info))
+ drv->capa.flags |= WPA_DRIVER_FLAGS_P2P_LISTEN_OFFLOAD;
os_free(info.flags);
}
diff --git a/src/drivers/driver_nl80211_event.c b/src/drivers/driver_nl80211_event.c
index 961a2e4..762e3ac 100644
--- a/src/drivers/driver_nl80211_event.c
+++ b/src/drivers/driver_nl80211_event.c
@@ -916,6 +916,7 @@
struct nlattr *tb[])
{
unsigned int freq;
+ union wpa_event_data event;
if (tb[NL80211_ATTR_MAC] == NULL) {
wpa_printf(MSG_DEBUG, "nl80211: No address in IBSS joined "
@@ -935,7 +936,10 @@
drv->first_bss->freq = freq;
}
- wpa_supplicant_event(drv->ctx, EVENT_ASSOC, NULL);
+ os_memset(&event, 0, sizeof(event));
+ event.assoc_info.freq = freq;
+
+ wpa_supplicant_event(drv->ctx, EVENT_ASSOC, &event);
}
@@ -1872,6 +1876,31 @@
external_scan);
}
+
+static void qca_nl80211_p2p_lo_stop_event(struct wpa_driver_nl80211_data *drv,
+ u8 *data, size_t len)
+{
+ struct nlattr *tb[QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX + 1];
+ union wpa_event_data event;
+
+ wpa_printf(MSG_DEBUG,
+ "nl80211: P2P listen offload stop vendor event received");
+
+ if (nla_parse(tb, QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX,
+ (struct nlattr *) data, len, NULL) ||
+ !tb[QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON])
+ return;
+
+ os_memset(&event, 0, sizeof(event));
+ event.p2p_lo_stop.reason_code =
+ nla_get_u8(tb[QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON]);
+
+ wpa_printf(MSG_DEBUG,
+ "nl80211: P2P Listen offload stop reason: %d",
+ event.p2p_lo_stop.reason_code);
+ wpa_supplicant_event(drv->ctx, EVENT_P2P_LO_STOP, &event);
+}
+
#endif /* CONFIG_DRIVER_NL80211_QCA */
@@ -1905,6 +1934,9 @@
case QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE:
qca_nl80211_scan_done_event(drv, data, len);
break;
+ case QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP:
+ qca_nl80211_p2p_lo_stop_event(drv, data, len);
+ break;
#endif /* CONFIG_DRIVER_NL80211_QCA */
default:
wpa_printf(MSG_DEBUG,
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index 53c8278..2206941 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -1829,6 +1829,44 @@
* %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per
* interface type.
*
+ * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO
+ * groupID for monitor mode.
+ * The first 8 bytes are a mask that defines the membership in each
+ * group (there are 64 groups, group 0 and 63 are reserved),
+ * each bit represents a group and set to 1 for being a member in
+ * that group and 0 for not being a member.
+ * The remaining 16 bytes define the position in each group: 2 bits for
+ * each group.
+ * (smaller group numbers represented on most significant bits and bigger
+ * group numbers on least significant bits.)
+ * This attribute is used only if all interfaces are in monitor mode.
+ * Set this attribute in order to monitor packets using the given MU-MIMO
+ * groupID data.
+ * to turn off that feature set all the bits of the groupID to zero.
+ * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow
+ * when using MU-MIMO air sniffer.
+ * to turn that feature off set an invalid mac address
+ * (e.g. FF:FF:FF:FF:FF:FF)
+ *
+ * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually
+ * started (u64). The time is the TSF of the BSS the interface that
+ * requested the scan is connected to (if available, otherwise this
+ * attribute must not be included).
+ * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which
+ * %NL80211_ATTR_SCAN_START_TIME_TSF is set.
+ * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If
+ * %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the
+ * maximum measurement duration allowed. This attribute is used with
+ * measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN
+ * if the scan is used for beacon report radio measurement.
+ * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates
+ * that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is
+ * mandatory. If this flag is not set, the duration is the maximum duration
+ * and the actual measurement duration may be shorter.
+ *
+ * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is
+ * used to pull the stored data for mesh peer in power save state.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2213,6 +2251,16 @@
NL80211_ATTR_IFTYPE_EXT_CAPA,
+ NL80211_ATTR_MU_MIMO_GROUP_DATA,
+ NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR,
+
+ NL80211_ATTR_SCAN_START_TIME_TSF,
+ NL80211_ATTR_SCAN_START_TIME_TSF_BSSID,
+ NL80211_ATTR_MEASUREMENT_DURATION,
+ NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY,
+
+ NL80211_ATTR_MESH_PEER_AID,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -3474,6 +3522,12 @@
* was last updated by a received frame. The value is expected to be
* accurate to about 10ms. (u64, nanoseconds)
* @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
+ * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first
+ * octet of the timestamp field of the last beacon/probe received for
+ * this BSS. The time is the TSF of the BSS specified by
+ * @NL80211_BSS_PARENT_BSSID. (u64).
+ * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF
+ * is set.
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
@@ -3495,6 +3549,8 @@
NL80211_BSS_PRESP_DATA,
NL80211_BSS_LAST_SEEN_BOOTTIME,
NL80211_BSS_PAD,
+ NL80211_BSS_PARENT_TSF,
+ NL80211_BSS_PARENT_BSSID,
/* keep last */
__NL80211_BSS_AFTER_LAST,
@@ -4479,6 +4535,22 @@
* %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
* the ASSOC_REQ_USE_RRM flag in the association request even if
* NL80211_FEATURE_QUIET is not advertized.
+ * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
+ * sniffer which means that it can be configured to hear packets from
+ * certain groups which can be configured by the
+ * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute,
+ * or can be configured to follow a station by configuring the
+ * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute.
+ * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual
+ * time the scan started in scan results event. The time is the TSF of
+ * the BSS that the interface that requested the scan is connected to
+ * (if available).
+ * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
+ * time the last beacon/probe was received. The time is the TSF of the
+ * BSS that the interface that requested the scan is connected to
+ * (if available).
+ * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
+ * channel dwell time.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4486,6 +4558,10 @@
enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_VHT_IBSS,
NL80211_EXT_FEATURE_RRM,
+ NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER,
+ NL80211_EXT_FEATURE_SCAN_START_TIME,
+ NL80211_EXT_FEATURE_BSS_PARENT_TSF,
+ NL80211_EXT_FEATURE_SET_SCAN_DWELL,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/src/p2p/p2p.c b/src/p2p/p2p.c
index a209a56..996b4e8 100644
--- a/src/p2p/p2p.c
+++ b/src/p2p/p2p.c
@@ -788,11 +788,11 @@
dev->oper_ssid_len = msg.ssid[1];
}
- if (msg.adv_service_instance && msg.adv_service_instance_len) {
- wpabuf_free(dev->info.p2ps_instance);
+ wpabuf_free(dev->info.p2ps_instance);
+ dev->info.p2ps_instance = NULL;
+ if (msg.adv_service_instance && msg.adv_service_instance_len)
dev->info.p2ps_instance = wpabuf_alloc_copy(
msg.adv_service_instance, msg.adv_service_instance_len);
- }
if (freq >= 2412 && freq <= 2484 && msg.ds_params &&
*msg.ds_params >= 1 && *msg.ds_params <= 14) {
@@ -2234,6 +2234,58 @@
return buf;
}
+static int p2p_build_probe_resp_buf(struct p2p_data *p2p, struct wpabuf *buf,
+ struct wpabuf *ies,
+ const u8 *addr, int rx_freq)
+{
+ struct ieee80211_mgmt *resp;
+ u8 channel, op_class;
+
+ resp = wpabuf_put(buf, offsetof(struct ieee80211_mgmt,
+ u.probe_resp.variable));
+
+ resp->frame_control = host_to_le16((WLAN_FC_TYPE_MGMT << 2) |
+ (WLAN_FC_STYPE_PROBE_RESP << 4));
+ os_memcpy(resp->da, addr, ETH_ALEN);
+ os_memcpy(resp->sa, p2p->cfg->dev_addr, ETH_ALEN);
+ os_memcpy(resp->bssid, p2p->cfg->dev_addr, ETH_ALEN);
+ resp->u.probe_resp.beacon_int = host_to_le16(100);
+ /* hardware or low-level driver will setup seq_ctrl and timestamp */
+ resp->u.probe_resp.capab_info =
+ host_to_le16(WLAN_CAPABILITY_SHORT_PREAMBLE |
+ WLAN_CAPABILITY_PRIVACY |
+ WLAN_CAPABILITY_SHORT_SLOT_TIME);
+
+ wpabuf_put_u8(buf, WLAN_EID_SSID);
+ wpabuf_put_u8(buf, P2P_WILDCARD_SSID_LEN);
+ wpabuf_put_data(buf, P2P_WILDCARD_SSID, P2P_WILDCARD_SSID_LEN);
+
+ wpabuf_put_u8(buf, WLAN_EID_SUPP_RATES);
+ wpabuf_put_u8(buf, 8);
+ wpabuf_put_u8(buf, (60 / 5) | 0x80);
+ wpabuf_put_u8(buf, 90 / 5);
+ wpabuf_put_u8(buf, (120 / 5) | 0x80);
+ wpabuf_put_u8(buf, 180 / 5);
+ wpabuf_put_u8(buf, (240 / 5) | 0x80);
+ wpabuf_put_u8(buf, 360 / 5);
+ wpabuf_put_u8(buf, 480 / 5);
+ wpabuf_put_u8(buf, 540 / 5);
+
+ if (!rx_freq) {
+ channel = p2p->cfg->channel;
+ } else if (p2p_freq_to_channel(rx_freq, &op_class, &channel)) {
+ p2p_err(p2p, "Failed to convert freq to channel");
+ return -1;
+ }
+
+ wpabuf_put_u8(buf, WLAN_EID_DS_PARAMS);
+ wpabuf_put_u8(buf, 1);
+ wpabuf_put_u8(buf, channel);
+
+ wpabuf_put_buf(buf, ies);
+
+ return 0;
+}
static int p2p_service_find_asp(struct p2p_data *p2p, const u8 *hash)
{
@@ -2267,10 +2319,8 @@
{
struct ieee802_11_elems elems;
struct wpabuf *buf;
- struct ieee80211_mgmt *resp;
struct p2p_message msg;
struct wpabuf *ies;
- u8 channel, op_class;
if (ieee802_11_parse_elems((u8 *) ie, ie_len, &elems, 0) ==
ParseFailed) {
@@ -2414,49 +2464,12 @@
return P2P_PREQ_NOT_PROCESSED;
}
- resp = wpabuf_put(buf, offsetof(struct ieee80211_mgmt,
- u.probe_resp.variable));
-
- resp->frame_control = host_to_le16((WLAN_FC_TYPE_MGMT << 2) |
- (WLAN_FC_STYPE_PROBE_RESP << 4));
- os_memcpy(resp->da, addr, ETH_ALEN);
- os_memcpy(resp->sa, p2p->cfg->dev_addr, ETH_ALEN);
- os_memcpy(resp->bssid, p2p->cfg->dev_addr, ETH_ALEN);
- resp->u.probe_resp.beacon_int = host_to_le16(100);
- /* hardware or low-level driver will setup seq_ctrl and timestamp */
- resp->u.probe_resp.capab_info =
- host_to_le16(WLAN_CAPABILITY_SHORT_PREAMBLE |
- WLAN_CAPABILITY_PRIVACY |
- WLAN_CAPABILITY_SHORT_SLOT_TIME);
-
- wpabuf_put_u8(buf, WLAN_EID_SSID);
- wpabuf_put_u8(buf, P2P_WILDCARD_SSID_LEN);
- wpabuf_put_data(buf, P2P_WILDCARD_SSID, P2P_WILDCARD_SSID_LEN);
-
- wpabuf_put_u8(buf, WLAN_EID_SUPP_RATES);
- wpabuf_put_u8(buf, 8);
- wpabuf_put_u8(buf, (60 / 5) | 0x80);
- wpabuf_put_u8(buf, 90 / 5);
- wpabuf_put_u8(buf, (120 / 5) | 0x80);
- wpabuf_put_u8(buf, 180 / 5);
- wpabuf_put_u8(buf, (240 / 5) | 0x80);
- wpabuf_put_u8(buf, 360 / 5);
- wpabuf_put_u8(buf, 480 / 5);
- wpabuf_put_u8(buf, 540 / 5);
-
- if (!rx_freq) {
- channel = p2p->cfg->channel;
- } else if (p2p_freq_to_channel(rx_freq, &op_class, &channel)) {
+ if (p2p_build_probe_resp_buf(p2p, buf, ies, addr, rx_freq)) {
wpabuf_free(ies);
wpabuf_free(buf);
return P2P_PREQ_NOT_PROCESSED;
}
- wpabuf_put_u8(buf, WLAN_EID_DS_PARAMS);
- wpabuf_put_u8(buf, 1);
- wpabuf_put_u8(buf, channel);
-
- wpabuf_put_buf(buf, ies);
wpabuf_free(ies);
p2p->cfg->send_probe_resp(p2p->cfg->cb_ctx, buf, rx_freq);
@@ -2470,12 +2483,18 @@
enum p2p_probe_req_status
p2p_probe_req_rx(struct p2p_data *p2p, const u8 *addr, const u8 *dst,
const u8 *bssid, const u8 *ie, size_t ie_len,
- unsigned int rx_freq)
+ unsigned int rx_freq, int p2p_lo_started)
{
enum p2p_probe_req_status res;
p2p_add_dev_from_probe_req(p2p, addr, ie, ie_len);
+ if (p2p_lo_started) {
+ p2p_dbg(p2p,
+ "Probe Response is offloaded, do not reply Probe Request");
+ return P2P_PREQ_PROCESSED;
+ }
+
res = p2p_reply_probe(p2p, addr, dst, bssid, ie, ie_len, rx_freq);
if (res != P2P_PREQ_PROCESSED && res != P2P_PREQ_NOT_PROCESSED)
return res;
@@ -2980,7 +2999,6 @@
os_free(p2p->groups);
p2ps_prov_free(p2p);
wpabuf_free(p2p->sd_resp);
- os_free(p2p->after_scan_tx);
p2p_remove_wps_vendor_extensions(p2p);
os_free(p2p->no_go_freq.range);
p2p_service_flush_asp(p2p);
@@ -5490,3 +5508,34 @@
i, p2p->pref_freq_list[i]);
}
}
+
+
+struct wpabuf * p2p_build_probe_resp_template(struct p2p_data *p2p,
+ unsigned int freq)
+{
+ struct wpabuf *ies, *buf;
+ u8 addr[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+ int ret;
+
+ ies = p2p_build_probe_resp_ies(p2p, NULL, 0);
+ if (!ies) {
+ wpa_printf(MSG_ERROR,
+ "CTRL: Failed to build Probe Response IEs");
+ return NULL;
+ }
+
+ buf = wpabuf_alloc(200 + wpabuf_len(ies));
+ if (!buf) {
+ wpabuf_free(ies);
+ return NULL;
+ }
+
+ ret = p2p_build_probe_resp_buf(p2p, buf, ies, addr, freq);
+ wpabuf_free(ies);
+ if (ret) {
+ wpabuf_free(buf);
+ return NULL;
+ }
+
+ return buf;
+}
diff --git a/src/p2p/p2p.h b/src/p2p/p2p.h
index 186af36..5b5a0bf 100644
--- a/src/p2p/p2p.h
+++ b/src/p2p/p2p.h
@@ -1555,12 +1555,13 @@
* @ie: Information elements from the Probe Request frame body
* @ie_len: Length of ie buffer in octets
* @rx_freq: Probe Request frame RX frequency
+ * @p2p_lo_started: Whether P2P Listen Offload is started
* Returns: value indicating the type and status of the probe request
*/
enum p2p_probe_req_status
p2p_probe_req_rx(struct p2p_data *p2p, const u8 *addr, const u8 *dst,
const u8 *bssid, const u8 *ie, size_t ie_len,
- unsigned int rx_freq);
+ unsigned int rx_freq, int p2p_lo_started);
/**
* p2p_rx_action - Report received Action frame
@@ -2383,4 +2384,7 @@
int p2p_group_get_common_freqs(struct p2p_group *group, int *common_freqs,
unsigned int *num);
+struct wpabuf * p2p_build_probe_resp_template(struct p2p_data *p2p,
+ unsigned int freq);
+
#endif /* P2P_H */