[wpa_supplicant] Cumulative patch from c4e90da6d

Bug: 124017368
Test: Device boots up and connects to WPA3/OWE wifi networks, run traffic.
Test: Able to turn on/off softap, associate wifi STA, run traffic.
Test: DPP functional test.
Test: Regression test passed (Bug: 124052942)

c4e90da6d MBO: Move the WNM-Notification subtype definitions to common location
105b14f54 HS 2.0: Update the T&C Acceptance subtype value
65b487ae5 HS 2.0: Add QUIET=1 support for building hs20-osu-client
73f285dad Add FT-PSK to GET_CAPABILITY key_mgmt
6110753b1 nl80211: Clear PMKID add command message buffer
0fa33e05b nl80211: Clear connect command message buffer
b14e8ea1d nl80211: Request kernel to trim off payload of netlink requests from acks
789b48bb4 EAP peer: Clear temporary message buffers before freeing
8f99a3c26 Clear config item writing buffer before freeing it
a68e9b698 D-Bus: Fix P2P DeleteService dict iteration
0607346f1 D-Bus: Fix a memory leak in DeleteService handler
d05dda61d PEAP: Explicitly clear temporary keys from memory when using CMK
4e1cd3468 EAP-PEAP: Derive EMSK and use 128-octet derivation for MSK
d8c20ec59 DPP: Clear dpp_listen_freq on remain-on-channel failure
59fa20538 P2P: Allow the avoid channels for P2P discovery/negotiation
e34cd9f06 WNM: Fix WNM-Sleep Mode Request bounds checking
159a7fbde crl_reload_interval: Add CRL reloading support
83c860813 AP: Add wpa_psk_file reloading in runtime
ec5c39a55 AP: Allow identifying which passphrase station used with wpa_psk_file
b08c9ad0c AP: Expose PMK outside of wpa_auth module
89896c000 tests: Use python3 compatible print statement
bab493b90 tests: Use python3 compatible "except" statement
0dab47733 Write multi_ap_backhaul_sta to wpa_supplicant config
98251c6f2 dbus: Document more possible BSS/RSA/KeyMgmt values
1e591df06 Check supported types in wpas_mac_addr_rand_scan_set()
c85249aa1 Fix test compilation error related to sme_event_unprot_disconnect()
42d308635 SAE: Advertise Password Identifier use
59c693064 HS 2.0 server: Command line option to fetch the version information
2d1762fa4 HS 2.0 server: Alternative subrem updateNode for certificate credentials
d97cf2a11 HS 2.0 server: Use noMOUpdate in client certificate subrem
13a200a92 FILS: Remove notes about experimental implementation
86d4e0537 dbus: Expose support of SAE key management in BSS properties

Change-Id: I83ffca34ff5349c226db6215ff1ae35c3b7ab335
diff --git a/wpa_supplicant/examples/wpas-dbus-new-signals.py b/wpa_supplicant/examples/wpas-dbus-new-signals.py
index d90ef18..366a655 100755
--- a/wpa_supplicant/examples/wpas-dbus-new-signals.py
+++ b/wpa_supplicant/examples/wpas-dbus-new-signals.py
@@ -32,17 +32,17 @@
 		if_obj = bus.get_object(WPAS_DBUS_SERVICE, path)
 		ifname = if_obj.Get(WPAS_DBUS_INTERFACES_INTERFACE, 'Ifname',
 			      dbus_interface=dbus.PROPERTIES_IFACE)
-		print ifname
+		print(ifname)
 
 def interfaceAdded(interface, properties):
-	print "InterfaceAdded(%s): Ifname=%s" % (interface, properties['Ifname'])
+	print("InterfaceAdded(%s): Ifname=%s" % (interface, properties['Ifname']))
 
 def interfaceRemoved(interface):
-	print "InterfaceRemoved(%s)" % (interface)
+	print("InterfaceRemoved(%s)" % (interface))
 
 def propertiesChanged(properties):
 	for i in properties:
-		print "PropertiesChanged: %s=%s" % (i, properties[i])
+		print("PropertiesChanged: %s=%s" % (i, properties[i]))
 
 def showBss(bss):
 	net_obj = bus.get_object(WPAS_DBUS_SERVICE, bss)
@@ -80,48 +80,48 @@
 	else:
 		maxrate = 0
 
-	print "  %s  ::  ssid='%s'  wpa=%s  wpa2=%s  signal=%d  rate=%d  freq=%d" % (bssid, ssid, wpa, wpa2, signal, maxrate, freq)
+	print("  %s  ::  ssid='%s'  wpa=%s  wpa2=%s  signal=%d  rate=%d  freq=%d" % (bssid, ssid, wpa, wpa2, signal, maxrate, freq))
 
 def scanDone(success):
 	gobject.MainLoop().quit()
-	print "Scan done: success=%s" % success
+	print("Scan done: success=%s" % success)
 
 def scanDone2(success, path=None):
-	print "Scan done: success=%s [path=%s]" % (success, path)
+	print("Scan done: success=%s [path=%s]" % (success, path))
 
 def bssAdded(bss, properties):
-	print "BSS added: %s" % (bss)
+	print("BSS added: %s" % (bss))
 	showBss(bss)
 
 def bssRemoved(bss):
-	print "BSS removed: %s" % (bss)
+	print("BSS removed: %s" % (bss))
 
 def blobAdded(blob):
-	print "BlobAdded(%s)" % (blob)
+	print("BlobAdded(%s)" % (blob))
 
 def blobRemoved(blob):
-	print "BlobRemoved(%s)" % (blob)
+	print("BlobRemoved(%s)" % (blob))
 
 def networkAdded(network, properties):
-	print "NetworkAdded(%s)" % (network)
+	print("NetworkAdded(%s)" % (network))
 
 def networkRemoved(network):
-	print "NetworkRemoved(%s)" % (network)
+	print("NetworkRemoved(%s)" % (network))
 
 def networkSelected(network):
-	print "NetworkSelected(%s)" % (network)
+	print("NetworkSelected(%s)" % (network))
 
 def propertiesChangedInterface(properties):
 	for i in properties:
-		print "PropertiesChanged(interface): %s=%s" % (i, properties[i])
+		print("PropertiesChanged(interface): %s=%s" % (i, properties[i]))
 
 def propertiesChangedBss(properties):
 	for i in properties:
-		print "PropertiesChanged(BSS): %s=%s" % (i, properties[i])
+		print("PropertiesChanged(BSS): %s=%s" % (i, properties[i]))
 
 def propertiesChangedNetwork(properties):
 	for i in properties:
-		print "PropertiesChanged(Network): %s=%s" % (i, properties[i])
+		print("PropertiesChanged(Network): %s=%s" % (i, properties[i]))
 
 def main():
 	dbus.mainloop.glib.DBusGMainLoop(set_as_default=True)