[wpa_supplicant] Cumulative patch from c4e90da6d
Bug: 124017368
Test: Device boots up and connects to WPA3/OWE wifi networks, run traffic.
Test: Able to turn on/off softap, associate wifi STA, run traffic.
Test: DPP functional test.
Test: Regression test passed (Bug: 124052942)
c4e90da6d MBO: Move the WNM-Notification subtype definitions to common location
105b14f54 HS 2.0: Update the T&C Acceptance subtype value
65b487ae5 HS 2.0: Add QUIET=1 support for building hs20-osu-client
73f285dad Add FT-PSK to GET_CAPABILITY key_mgmt
6110753b1 nl80211: Clear PMKID add command message buffer
0fa33e05b nl80211: Clear connect command message buffer
b14e8ea1d nl80211: Request kernel to trim off payload of netlink requests from acks
789b48bb4 EAP peer: Clear temporary message buffers before freeing
8f99a3c26 Clear config item writing buffer before freeing it
a68e9b698 D-Bus: Fix P2P DeleteService dict iteration
0607346f1 D-Bus: Fix a memory leak in DeleteService handler
d05dda61d PEAP: Explicitly clear temporary keys from memory when using CMK
4e1cd3468 EAP-PEAP: Derive EMSK and use 128-octet derivation for MSK
d8c20ec59 DPP: Clear dpp_listen_freq on remain-on-channel failure
59fa20538 P2P: Allow the avoid channels for P2P discovery/negotiation
e34cd9f06 WNM: Fix WNM-Sleep Mode Request bounds checking
159a7fbde crl_reload_interval: Add CRL reloading support
83c860813 AP: Add wpa_psk_file reloading in runtime
ec5c39a55 AP: Allow identifying which passphrase station used with wpa_psk_file
b08c9ad0c AP: Expose PMK outside of wpa_auth module
89896c000 tests: Use python3 compatible print statement
bab493b90 tests: Use python3 compatible "except" statement
0dab47733 Write multi_ap_backhaul_sta to wpa_supplicant config
98251c6f2 dbus: Document more possible BSS/RSA/KeyMgmt values
1e591df06 Check supported types in wpas_mac_addr_rand_scan_set()
c85249aa1 Fix test compilation error related to sme_event_unprot_disconnect()
42d308635 SAE: Advertise Password Identifier use
59c693064 HS 2.0 server: Command line option to fetch the version information
2d1762fa4 HS 2.0 server: Alternative subrem updateNode for certificate credentials
d97cf2a11 HS 2.0 server: Use noMOUpdate in client certificate subrem
13a200a92 FILS: Remove notes about experimental implementation
86d4e0537 dbus: Expose support of SAE key management in BSS properties
Change-Id: I83ffca34ff5349c226db6215ff1ae35c3b7ab335
diff --git a/wpa_supplicant/config_ssid.h b/wpa_supplicant/config_ssid.h
index d2a52d7..1b2b1f1 100644
--- a/wpa_supplicant/config_ssid.h
+++ b/wpa_supplicant/config_ssid.h
@@ -33,10 +33,13 @@
#define DEFAULT_DISABLE_HT40 0
#define DEFAULT_DISABLE_SGI 0
#define DEFAULT_DISABLE_LDPC 0
+#define DEFAULT_TX_STBC -1 /* no change */
+#define DEFAULT_RX_STBC -1 /* no change */
#define DEFAULT_DISABLE_MAX_AMSDU -1 /* no change */
#define DEFAULT_AMPDU_FACTOR -1 /* no change */
#define DEFAULT_AMPDU_DENSITY -1 /* no change */
#define DEFAULT_USER_SELECTED_SIM 1
+#define DEFAULT_MAX_OPER_CHWIDTH -1
struct psk_list_entry {
struct dl_list list;
@@ -457,6 +460,17 @@
enum mfp_options ieee80211w;
#endif /* CONFIG_IEEE80211W */
+#ifdef CONFIG_OCV
+ /**
+ * ocv - Enable/disable operating channel validation
+ *
+ * If this parameter is set to 1, stations will exchange OCI element
+ * to cryptographically verify the operating channel. Setting this
+ * parameter to 0 disables this option. Default value: 0.
+ */
+ int ocv;
+#endif /* CONFIG_OCV */
+
/**
* frequency - Channel frequency in megahertz (MHz) for IBSS
*
@@ -505,6 +519,8 @@
int vht;
+ int he;
+
int max_oper_chwidth;
unsigned int vht_center_freq1;
@@ -682,6 +698,22 @@
* By default (empty string): Use whatever the OS has configured.
*/
char *ht_mcs;
+
+ /**
+ * tx_stbc - Indicate STBC support for TX streams
+ *
+ * Value: -1..1, by default (-1): use whatever the OS or card has
+ * configured. See IEEE Std 802.11-2016, 9.4.2.56.2.
+ */
+ int tx_stbc;
+
+ /**
+ * rx_stbc - Indicate STBC support for RX streams
+ *
+ * Value: -1..3, by default (-1): use whatever the OS or card has
+ * configured. See IEEE Std 802.11-2016, 9.4.2.56.2.
+ */
+ int rx_stbc;
#endif /* CONFIG_HT_OVERRIDES */
#ifdef CONFIG_VHT_OVERRIDES
@@ -774,6 +806,33 @@
int macsec_integ_only;
/**
+ * macsec_replay_protect - Enable MACsec replay protection
+ *
+ * This setting applies only when MACsec is in use, i.e.,
+ * - macsec_policy is enabled
+ * - the key server has decided to enable MACsec
+ *
+ * 0: Replay protection disabled (default)
+ * 1: Replay protection enabled
+ */
+ int macsec_replay_protect;
+
+ /**
+ * macsec_replay_window - MACsec replay protection window
+ *
+ * A window in which replay is tolerated, to allow receipt of frames
+ * that have been misordered by the network.
+ *
+ * This setting applies only when MACsec replay protection active, i.e.,
+ * - macsec_replay_protect is enabled
+ * - the key server has decided to enable MACsec
+ *
+ * 0: No replay window, strict check (default)
+ * 1..2^32-1: number of packets that could be misordered
+ */
+ u32 macsec_replay_window;
+
+ /**
* macsec_port - MACsec port (in SCI)
*
* Port component of the SCI.
@@ -792,14 +851,16 @@
/**
* mka_ckn - MKA pre-shared CKN
*/
-#define MACSEC_CKN_LEN 32
- u8 mka_ckn[MACSEC_CKN_LEN];
+#define MACSEC_CKN_MAX_LEN 32
+ size_t mka_ckn_len;
+ u8 mka_ckn[MACSEC_CKN_MAX_LEN];
/**
* mka_cak - MKA pre-shared CAK
*/
-#define MACSEC_CAK_LEN 16
- u8 mka_cak[MACSEC_CAK_LEN];
+#define MACSEC_CAK_MAX_LEN 32
+ size_t mka_cak_len;
+ u8 mka_cak[MACSEC_CAK_MAX_LEN];
#define MKA_PSK_SET_CKN BIT(0)
#define MKA_PSK_SET_CAK BIT(1)
@@ -937,6 +998,13 @@
* the selection attempts for OWE BSS exceed the configured threshold.
*/
int owe_transition_bss_select_count;
+
+ /**
+ * multi_ap_backhaul_sta - Multi-AP backhaul STA
+ * 0 = normal (non-Multi-AP) station
+ * 1 = Multi-AP backhaul station
+ */
+ int multi_ap_backhaul_sta;
};
#endif /* CONFIG_SSID_H */