[wpa_supplicant] Cumulative patch from c4e90da6d
Bug: 124017368
Test: Device boots up and connects to WPA3/OWE wifi networks, run traffic.
Test: Able to turn on/off softap, associate wifi STA, run traffic.
Test: DPP functional test.
Test: Regression test passed (Bug: 124052942)
c4e90da6d MBO: Move the WNM-Notification subtype definitions to common location
105b14f54 HS 2.0: Update the T&C Acceptance subtype value
65b487ae5 HS 2.0: Add QUIET=1 support for building hs20-osu-client
73f285dad Add FT-PSK to GET_CAPABILITY key_mgmt
6110753b1 nl80211: Clear PMKID add command message buffer
0fa33e05b nl80211: Clear connect command message buffer
b14e8ea1d nl80211: Request kernel to trim off payload of netlink requests from acks
789b48bb4 EAP peer: Clear temporary message buffers before freeing
8f99a3c26 Clear config item writing buffer before freeing it
a68e9b698 D-Bus: Fix P2P DeleteService dict iteration
0607346f1 D-Bus: Fix a memory leak in DeleteService handler
d05dda61d PEAP: Explicitly clear temporary keys from memory when using CMK
4e1cd3468 EAP-PEAP: Derive EMSK and use 128-octet derivation for MSK
d8c20ec59 DPP: Clear dpp_listen_freq on remain-on-channel failure
59fa20538 P2P: Allow the avoid channels for P2P discovery/negotiation
e34cd9f06 WNM: Fix WNM-Sleep Mode Request bounds checking
159a7fbde crl_reload_interval: Add CRL reloading support
83c860813 AP: Add wpa_psk_file reloading in runtime
ec5c39a55 AP: Allow identifying which passphrase station used with wpa_psk_file
b08c9ad0c AP: Expose PMK outside of wpa_auth module
89896c000 tests: Use python3 compatible print statement
bab493b90 tests: Use python3 compatible "except" statement
0dab47733 Write multi_ap_backhaul_sta to wpa_supplicant config
98251c6f2 dbus: Document more possible BSS/RSA/KeyMgmt values
1e591df06 Check supported types in wpas_mac_addr_rand_scan_set()
c85249aa1 Fix test compilation error related to sme_event_unprot_disconnect()
42d308635 SAE: Advertise Password Identifier use
59c693064 HS 2.0 server: Command line option to fetch the version information
2d1762fa4 HS 2.0 server: Alternative subrem updateNode for certificate credentials
d97cf2a11 HS 2.0 server: Use noMOUpdate in client certificate subrem
13a200a92 FILS: Remove notes about experimental implementation
86d4e0537 dbus: Expose support of SAE key management in BSS properties
Change-Id: I83ffca34ff5349c226db6215ff1ae35c3b7ab335
diff --git a/src/ap/hostapd.c b/src/ap/hostapd.c
index 117ee08..342585f 100644
--- a/src/ap/hostapd.c
+++ b/src/ap/hostapd.c
@@ -176,8 +176,27 @@
}
+static int hostapd_iface_conf_changed(struct hostapd_config *newconf,
+ struct hostapd_config *oldconf)
+{
+ size_t i;
+
+ if (newconf->num_bss != oldconf->num_bss)
+ return 1;
+
+ for (i = 0; i < newconf->num_bss; i++) {
+ if (os_strcmp(newconf->bss[i]->iface,
+ oldconf->bss[i]->iface) != 0)
+ return 1;
+ }
+
+ return 0;
+}
+
+
int hostapd_reload_config(struct hostapd_iface *iface)
{
+ struct hapd_interfaces *interfaces = iface->interfaces;
struct hostapd_data *hapd = iface->bss[0];
struct hostapd_config *newconf, *oldconf;
size_t j;
@@ -200,6 +219,35 @@
hostapd_clear_old(iface);
oldconf = hapd->iconf;
+ if (hostapd_iface_conf_changed(newconf, oldconf)) {
+ char *fname;
+ int res;
+
+ wpa_printf(MSG_DEBUG,
+ "Configuration changes include interface/BSS modification - force full disable+enable sequence");
+ fname = os_strdup(iface->config_fname);
+ if (!fname) {
+ hostapd_config_free(newconf);
+ return -1;
+ }
+ hostapd_remove_iface(interfaces, hapd->conf->iface);
+ iface = hostapd_init(interfaces, fname);
+ os_free(fname);
+ hostapd_config_free(newconf);
+ if (!iface) {
+ wpa_printf(MSG_ERROR,
+ "Failed to initialize interface on config reload");
+ return -1;
+ }
+ iface->interfaces = interfaces;
+ interfaces->iface[interfaces->count] = iface;
+ interfaces->count++;
+ res = hostapd_enable_iface(iface);
+ if (res < 0)
+ wpa_printf(MSG_ERROR,
+ "Failed to enable interface on config reload");
+ return res;
+ }
iface->conf = newconf;
for (j = 0; j < iface->num_bss; j++) {
@@ -1620,127 +1668,6 @@
#endif /* CONFIG_FST */
-
-#ifdef NEED_AP_MLME
-static enum nr_chan_width hostapd_get_nr_chan_width(struct hostapd_data *hapd,
- int ht, int vht)
-{
- if (!ht && !vht)
- return NR_CHAN_WIDTH_20;
- if (!hapd->iconf->secondary_channel)
- return NR_CHAN_WIDTH_20;
- if (!vht || hapd->iconf->vht_oper_chwidth == VHT_CHANWIDTH_USE_HT)
- return NR_CHAN_WIDTH_40;
- if (hapd->iconf->vht_oper_chwidth == VHT_CHANWIDTH_80MHZ)
- return NR_CHAN_WIDTH_80;
- if (hapd->iconf->vht_oper_chwidth == VHT_CHANWIDTH_160MHZ)
- return NR_CHAN_WIDTH_160;
- if (hapd->iconf->vht_oper_chwidth == VHT_CHANWIDTH_80P80MHZ)
- return NR_CHAN_WIDTH_80P80;
- return NR_CHAN_WIDTH_20;
-}
-#endif /* NEED_AP_MLME */
-
-
-static void hostapd_set_own_neighbor_report(struct hostapd_data *hapd)
-{
-#ifdef NEED_AP_MLME
- u16 capab = hostapd_own_capab_info(hapd);
- int ht = hapd->iconf->ieee80211n && !hapd->conf->disable_11n;
- int vht = hapd->iconf->ieee80211ac && !hapd->conf->disable_11ac;
- struct wpa_ssid_value ssid;
- u8 channel, op_class;
- u8 center_freq1_idx = 0, center_freq2_idx = 0;
- enum nr_chan_width width;
- u32 bssid_info;
- struct wpabuf *nr;
-
- if (!(hapd->conf->radio_measurements[0] &
- WLAN_RRM_CAPS_NEIGHBOR_REPORT))
- return;
-
- bssid_info = 3; /* AP is reachable */
- bssid_info |= NEI_REP_BSSID_INFO_SECURITY; /* "same as the AP" */
- bssid_info |= NEI_REP_BSSID_INFO_KEY_SCOPE; /* "same as the AP" */
-
- if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT)
- bssid_info |= NEI_REP_BSSID_INFO_SPECTRUM_MGMT;
-
- bssid_info |= NEI_REP_BSSID_INFO_RM; /* RRM is supported */
-
- if (hapd->conf->wmm_enabled) {
- bssid_info |= NEI_REP_BSSID_INFO_QOS;
-
- if (hapd->conf->wmm_uapsd &&
- (hapd->iface->drv_flags & WPA_DRIVER_FLAGS_AP_UAPSD))
- bssid_info |= NEI_REP_BSSID_INFO_APSD;
- }
-
- if (ht) {
- bssid_info |= NEI_REP_BSSID_INFO_HT |
- NEI_REP_BSSID_INFO_DELAYED_BA;
-
- /* VHT bit added in IEEE P802.11-REVmc/D4.3 */
- if (vht)
- bssid_info |= NEI_REP_BSSID_INFO_VHT;
- }
-
- /* TODO: Set NEI_REP_BSSID_INFO_MOBILITY_DOMAIN if MDE is set */
-
- if (ieee80211_freq_to_channel_ext(hapd->iface->freq,
- hapd->iconf->secondary_channel,
- hapd->iconf->vht_oper_chwidth,
- &op_class, &channel) ==
- NUM_HOSTAPD_MODES)
- return;
- width = hostapd_get_nr_chan_width(hapd, ht, vht);
- if (vht) {
- center_freq1_idx = hapd->iconf->vht_oper_centr_freq_seg0_idx;
- if (width == NR_CHAN_WIDTH_80P80)
- center_freq2_idx =
- hapd->iconf->vht_oper_centr_freq_seg1_idx;
- } else if (ht) {
- ieee80211_freq_to_chan(hapd->iface->freq +
- 10 * hapd->iconf->secondary_channel,
- ¢er_freq1_idx);
- }
-
- ssid.ssid_len = hapd->conf->ssid.ssid_len;
- os_memcpy(ssid.ssid, hapd->conf->ssid.ssid, ssid.ssid_len);
-
- /*
- * Neighbor Report element size = BSSID + BSSID info + op_class + chan +
- * phy type + wide bandwidth channel subelement.
- */
- nr = wpabuf_alloc(ETH_ALEN + 4 + 1 + 1 + 1 + 5);
- if (!nr)
- return;
-
- wpabuf_put_data(nr, hapd->own_addr, ETH_ALEN);
- wpabuf_put_le32(nr, bssid_info);
- wpabuf_put_u8(nr, op_class);
- wpabuf_put_u8(nr, channel);
- wpabuf_put_u8(nr, ieee80211_get_phy_type(hapd->iface->freq, ht, vht));
-
- /*
- * Wide Bandwidth Channel subelement may be needed to allow the
- * receiving STA to send packets to the AP. See IEEE P802.11-REVmc/D5.0
- * Figure 9-301.
- */
- wpabuf_put_u8(nr, WNM_NEIGHBOR_WIDE_BW_CHAN);
- wpabuf_put_u8(nr, 3);
- wpabuf_put_u8(nr, width);
- wpabuf_put_u8(nr, center_freq1_idx);
- wpabuf_put_u8(nr, center_freq2_idx);
-
- hostapd_neighbor_set(hapd, hapd->own_addr, &ssid, nr, hapd->iconf->lci,
- hapd->iconf->civic, hapd->iconf->stationary_ap);
-
- wpabuf_free(nr);
-#endif /* NEED_AP_MLME */
-}
-
-
#ifdef CONFIG_OWE
static int hostapd_owe_iface_iter(struct hostapd_iface *iface, void *ctx)
@@ -2037,7 +1964,7 @@
iface->interfaces->terminate_on_error--;
for (j = 0; j < iface->num_bss; j++)
- hostapd_set_own_neighbor_report(iface->bss[j]);
+ hostapd_neighbor_set_own_report(iface->bss[j]);
return 0;
@@ -2682,7 +2609,7 @@
if (conf == NULL) {
wpa_printf(MSG_ERROR, "%s: Failed to allocate memory for "
"configuration", __func__);
- return NULL;
+ return NULL;
}
if (driver) {