diff --git a/src/common/dpp.c b/src/common/dpp.c
index 74a524d..677f586 100644
--- a/src/common/dpp.c
+++ b/src/common/dpp.c
@@ -840,6 +840,7 @@
 	if (sha256_vector(1, (const u8 **) &data, &data_len,
 			  bi->pubkey_hash) < 0) {
 		wpa_printf(MSG_DEBUG, "DPP: Failed to hash public key");
+		os_free(data);
 		return -1;
 	}
 	wpa_hexdump(MSG_DEBUG, "DPP: Public key hash",
@@ -2601,6 +2602,7 @@
 	ret = 0;
 fail:
 	EC_POINT_clear_free(l);
+	EC_POINT_clear_free(sum);
 	EC_KEY_free(bI);
 	EC_KEY_free(BR);
 	EC_KEY_free(PR);
@@ -5562,6 +5564,7 @@
 		if (!conf->curve) {
 			wpa_printf(MSG_INFO, "DPP: Unsupported curve: %s",
 				   curve);
+			os_free(conf);
 			return NULL;
 		}
 	}
@@ -6219,14 +6222,14 @@
 
 		if (EC_POINT_set_affine_coordinates_GFp(group, point, x, y,
 							ctx) != 1) {
-#if OPENSSL_VERSION_NUMBER >= 0x10101000L || defined(OPENSSL_IS_BORINGSSL)
+#if OPENSSL_VERSION_NUMBER >= 0x10100000L || defined(OPENSSL_IS_BORINGSSL)
 		/* Unlike older OpenSSL versions, OpenSSL 1.1.1 and BoringSSL
 		 * return an error from EC_POINT_set_affine_coordinates_GFp()
 		 * when the point is not on the curve. */
 			break;
-#else /* >=1.1.1 or OPENSSL_IS_BORINGSSL */
+#else /* >=1.1.0 or OPENSSL_IS_BORINGSSL */
 			goto fail;
-#endif /* >= 1.1.1 or OPENSSL_IS_BORINGSSL */
+#endif /* >= 1.1.0 or OPENSSL_IS_BORINGSSL */
 		}
 
 		if (!EC_POINT_is_on_curve(group, point, ctx))
diff --git a/src/common/ieee802_11_defs.h b/src/common/ieee802_11_defs.h
index e03a095..762e731 100644
--- a/src/common/ieee802_11_defs.h
+++ b/src/common/ieee802_11_defs.h
@@ -922,6 +922,16 @@
 					u8 variable[];
 				} STRUCT_PACKED bss_tm_query;
 				struct {
+					u8 action; /* 11 */
+					u8 dialog_token;
+					u8 req_info;
+				} STRUCT_PACKED coloc_intf_req;
+				struct {
+					u8 action; /* 12 */
+					u8 dialog_token;
+					u8 variable[];
+				} STRUCT_PACKED coloc_intf_report;
+				struct {
 					u8 action; /* 15 */
 					u8 variable[];
 				} STRUCT_PACKED slf_prot_action;
@@ -1331,6 +1341,7 @@
 #define HS20_STYPE_ICON_REQUEST 10
 #define HS20_STYPE_ICON_BINARY_FILE 11
 #define HS20_STYPE_OPERATOR_ICON_METADATA 12
+#define HS20_STYPE_OSU_PROVIDERS_NAI_LIST 13
 
 #define HS20_DGAF_DISABLED 0x01
 #define HS20_PPS_MO_ID_PRESENT 0x02
diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index 75a7cc0..7a4da46 100644
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -463,6 +463,17 @@
  *	extendable to send more information. The newer version carries the
  *	legacy blob encapsulated within an attribute and can be extended with
  *	additional vendor attributes that can enhance the NAN command interface.
+ * @QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT: Event to indicate scan triggered
+ *	or stopped within driver/firmware in order to initiate roaming. The
+ *	attributes used with this event are defined in enum
+ *	qca_wlan_vendor_attr_roam_scan. Some drivers may not send these events
+ *	in few cases, e.g., if the host processor is sleeping when this event
+ *	is generated in firmware.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG: This command is used to
+ *	configure parameters per peer to capture Channel Frequency Response
+ *	(CFR) and enable Periodic CFR capture. The attributes for this command
+ *	are defined in enum qca_wlan_vendor_peer_cfr_capture_attr.
  */
 enum qca_nl80211_vendor_subcmds {
 	QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
@@ -623,6 +634,8 @@
 	/* Frame filter operations for other BSSs/unassociated STAs */
 	QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER = 170,
 	QCA_NL80211_VENDOR_SUBCMD_NAN_EXT = 171,
+	QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT = 172,
+	QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG = 173,
 };
 
 enum qca_wlan_vendor_attr {
@@ -4938,6 +4951,10 @@
 	 * and ndp confirm.
 	 */
 	QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PROTOCOL = 29,
+	/* Unsigned 8-bit value indicating if NDP remote peer supports NAN NDPE.
+	 * 1:support 0:not support
+	 */
+	QCA_WLAN_VENDOR_ATTR_PEER_NDPE_SUPPORT = 30,
 
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST,
@@ -5553,6 +5570,40 @@
 	 */
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OVERRIDE_MU_EDCA = 21,
 
+	/* 8-bit unsigned value to configure the support for receiving
+	 * an MPDU that contains an operating mode control subfield.
+	 * This attribute is used to configure the testbed device.
+	 * 1-enable, 0-disable.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_SUPP = 22,
+
+	/* Nested attribute values required to setup the TWT session.
+	 * enum qca_wlan_vendor_attr_twt_setup provides the necessary
+	 * information to set up the session. It contains broadcast flags,
+	 * set_up flags, trigger value, flow type, flow ID, wake interval
+	 * exponent, protection, target wake time, wake duration, wake interval
+	 * mantissa. These nested attributes are used to setup a host triggered
+	 * TWT session.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP = 23,
+
+	/* This nested attribute is used to terminate the current TWT session.
+	 * It does not currently carry any attributes.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_TERMINATE = 24,
+
+	/* This nested attribute is used to suspend the current TWT session.
+	 * It does not currently carry any attributes.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SUSPEND = 25,
+
+	/* Nested attribute values to indicate the request for resume.
+	 * This attribute is used to resume the TWT session.
+	 * enum qca_wlan_vendor_attr_twt_resume provides the necessary
+	 * parameters required to resume the TWT session.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME = 26,
+
 	/* keep last */
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
 	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =
@@ -5706,4 +5757,237 @@
 		QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST - 1
 };
 
+/**
+ * enum qca_wlan_vendor_attr_twt_setup: Represents attributes for
+ * TWT (Target Wake Time) setup request. These attributes are sent as part of
+ * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP and
+ * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST: Flag attribute.
+ * Disable (flag attribute not present) - Individual TWT
+ * Enable (flag attribute present) - Broadcast TWT.
+ * Individual means the session is between the STA and the AP.
+ * This session is established using a separate negotiation between
+ * STA and AP.
+ * Broadcast means the session is across multiple STAs and an AP. The
+ * configuration parameters are announced in Beacon frames by the AP.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE: Required (u8).
+ * Unsigned 8-bit qca_wlan_vendor_twt_setup_req_type to
+ * specify the TWT request type
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER: Flag attribute
+ * Enable (flag attribute present) - TWT with trigger support.
+ * Disable (flag attribute not present) - TWT without trigger support.
+ * Trigger means the AP will send the trigger frame to allow STA to send data.
+ * Without trigger, the STA will wait for the MU EDCA timer before
+ * transmitting the data.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE: Required (u8)
+ * 0 - Announced TWT - In this mode, STA may skip few service periods to
+ * save more power. If STA wants to wake up, it will send a PS-POLL/QoS
+ * NULL frame to AP.
+ * 1 - Unannounced TWT - The STA will wakeup during every SP.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID: Optional (u8)
+ * Flow ID is the unique identifier for each TWT session.
+ * Currently this is not required and dialog ID will be set to zero.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP: Required (u8)
+ * This attribute (exp) is used along with the mantissa to derive the
+ * wake interval using the following formula:
+ * pow(2,exp) = wake_intvl_us/wake_intvl_mantis
+ * Wake interval is the interval between 2 successive SP.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION: Flag attribute
+ * Enable (flag attribute present) - Protection required.
+ * Disable (flag attribute not present) - Protection not required.
+ * If protection is enabled, then the AP will use protection
+ * mechanism using RTS/CTS to self to reserve the airtime.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME: Optional (u32)
+ * This attribute is used as the SP offset which is the offset from
+ * TSF after which the wake happens. The units are in microseconds. If
+ * this attribute is not provided, then the value will be set to zero.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION: Required (u32)
+ * This is the duration of the service period. The units are in TU.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA: Required (u32)
+ * This attribute is used to configure wake interval mantissa.
+ * The units are in TU.
+ */
+enum qca_wlan_vendor_attr_twt_setup {
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST = 1,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE = 2,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER = 3,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE = 4,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID = 5,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP = 6,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION = 7,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME = 8,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION = 9,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA = 10,
+
+	/* keep last */
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX =
+	QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_twt_resume: Represents attributes for
+ * TWT (Target Wake Time) resume request. These attributes are sent as part of
+ * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME and
+ * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT: Optional (u8)
+ * This attribute is used as the SP offset which is the offset from
+ * TSF after which the wake happens. The units are in microseconds.
+ * If this attribute is not provided, then the value will be set to
+ * zero.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE: Required (u32)
+ * This attribute represents the next TWT subfield size.
+ */
+enum qca_wlan_vendor_attr_twt_resume {
+	QCA_WLAN_VENDOR_ATTR_TWT_RESUME_INVALID = 0,
+	QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT = 1,
+	QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE = 2,
+
+	/* keep last */
+	QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_TWT_RESUME_MAX =
+	QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_twt_setup_req_type - Required (u8)
+ * Represents the setup type being requested for TWT.
+ * @QCA_WLAN_VENDOR_TWT_SETUP_REQUEST: STA is not specifying all the TWT
+ * parameters but relying on AP to fill the parameters during the negotiation.
+ * @QCA_WLAN_VENDOR_TWT_SETUP_SUGGEST: STA will provide all the suggested
+ * values which the AP may accept or AP may provide alternative parameters
+ * which the STA may accept.
+ * @QCA_WLAN_VENDOR_TWT_SETUP_DEMAND: STA is not willing to accept any
+ * alternate parameters than the requested ones.
+ */
+enum qca_wlan_vendor_twt_setup_req_type {
+	QCA_WLAN_VENDOR_TWT_SETUP_REQUEST = 1,
+	QCA_WLAN_VENDOR_TWT_SETUP_SUGGEST = 2,
+	QCA_WLAN_VENDOR_TWT_SETUP_DEMAND = 3,
+};
+
+/**
+ * enum qca_wlan_roam_scan_event_type - Type of roam scan event
+ *
+ * Indicates the type of roam scan event sent by firmware/driver.
+ *
+ * @QCA_WLAN_ROAM_SCAN_TRIGGER_EVENT: Roam scan trigger event type.
+ * @QCA_WLAN_ROAM_SCAN_STOP_EVENT: Roam scan stopped event type.
+ */
+enum qca_wlan_roam_scan_event_type {
+	QCA_WLAN_ROAM_SCAN_TRIGGER_EVENT = 0,
+	QCA_WLAN_ROAM_SCAN_STOP_EVENT = 1,
+};
+
+/**
+ * enum qca_wlan_roam_scan_trigger_reason - Roam scan trigger reason
+ *
+ * Indicates the reason for triggering roam scan by firmware/driver.
+ *
+ * @QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_LOW_RSSI: Due to low RSSI of current AP.
+ * @QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_HIGH_PER: Due to high packet error rate.
+ */
+enum qca_wlan_roam_scan_trigger_reason {
+	QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_LOW_RSSI = 0,
+	QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_HIGH_PER = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_roam_scan - Vendor subcmd attributes to report
+ * roam scan related details from driver/firmware to user space. enum values
+ * are used for NL attributes sent with
+ * %QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT sub command.
+ */
+enum qca_wlan_vendor_attr_roam_scan {
+	QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_INVALID = 0,
+	/* Encapsulates type of roam scan event being reported. enum
+	 * qca_wlan_roam_scan_event_type describes the possible range of
+	 * values. u32 attribute.
+	 */
+	QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_EVENT_TYPE = 1,
+	/* Encapsulates reason for triggering roam scan. enum
+	 * qca_wlan_roam_scan_trigger_reason describes the possible range of
+	 * values. u32 attribute.
+	 */
+	QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_TRIGGER_REASON = 2,
+
+	/* keep last */
+	QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_MAX =
+	QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_cfr_method - QCA vendor CFR methods used by
+ * attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD as part of vendor
+ * command QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG.
+ */
+enum qca_wlan_vendor_cfr_method {
+	/* CFR method using QOS Null frame */
+	QCA_WLAN_VENDOR_CFR_METHOD_QOS_NULL = 0,
+};
+
+/**
+ * enum qca_wlan_vendor_peer_cfr_capture_attr - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG to configure peer
+ * Channel Frequency Response capture parameters and enable periodic CFR
+ * capture.
+ */
+enum qca_wlan_vendor_peer_cfr_capture_attr {
+	QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_INVALID = 0,
+	/* 6-byte MAC address of the peer.
+	 * This attribute is mandatory.
+	 */
+	QCA_WLAN_VENDOR_ATTR_CFR_PEER_MAC_ADDR = 1,
+	/* Enable peer CFR Capture, flag attribute.
+	 * This attribute is mandatory to enable peer CFR capture.
+	 * If this attribute is not present, peer CFR capture is disabled.
+	 */
+	QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE = 2,
+	/* BW of measurement, attribute uses the values in enum nl80211_chan_width
+	 * Supported values: 20, 40, 80, 80+80, 160.
+	 * Note that all targets may not support all bandwidths.
+	 * u8 attribute. This attribute is mandatory if attribute
+	 * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
+	 */
+	QCA_WLAN_VENDOR_ATTR_PEER_CFR_BANDWIDTH = 3,
+	/* Periodicity of CFR measurement in msec.
+	 * Periodicity should be a multiple of Base timer.
+	 * Current Base timer value supported is 10 msecs (default).
+	 * 0 for one shot capture. u32 attribute.
+	 * This attribute is mandatory if attribute
+	 * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
+	 */
+	QCA_WLAN_VENDOR_ATTR_PEER_CFR_PERIODICITY = 4,
+	/* Method used to capture Channel Frequency Response.
+	 * Attribute uses the values defined in enum qca_wlan_vendor_cfr_method.
+	 * u8 attribute. This attribute is mandatory if attribute
+	 * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
+	 */
+	QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD = 5,
+	/* Enable periodic CFR capture, flag attribute.
+	 * This attribute is mandatory to enable Periodic CFR capture.
+	 * If this attribute is not present, periodic CFR capture is disabled.
+	 */
+	QCA_WLAN_VENDOR_ATTR_PERIODIC_CFR_CAPTURE_ENABLE = 6,
+
+	/* Keep last */
+	QCA_WLAN_VENDOR_ATTR_PEER_CFR_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_PEER_CFR_MAX =
+	QCA_WLAN_VENDOR_ATTR_PEER_CFR_AFTER_LAST - 1,
+};
+
 #endif /* QCA_VENDOR_H */
diff --git a/src/common/wpa_ctrl.h b/src/common/wpa_ctrl.h
index 4eb7356..f65077e 100644
--- a/src/common/wpa_ctrl.h
+++ b/src/common/wpa_ctrl.h
@@ -275,6 +275,9 @@
 #define RX_HS20_ICON "RX-HS20-ICON "
 #define RX_MBO_ANQP "RX-MBO-ANQP "
 
+/* parameters: <Venue Number> <Venue URL> */
+#define RX_VENUE_URL "RX-VENUE-URL "
+
 #define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION "
 #define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE "
 #define HS20_T_C_ACCEPTANCE "HS20-T-C-ACCEPTANCE "
@@ -329,6 +332,13 @@
 /* BSS Transition Management Response frame received */
 #define BSS_TM_RESP "BSS-TM-RESP "
 
+/* Collocated Interference Request frame received;
+ * parameters: <dialog token> <automatic report enabled> <report timeout> */
+#define COLOC_INTF_REQ "COLOC-INTF-REQ "
+/* Collocated Interference Report frame received;
+ * parameters: <STA address> <dialog token> <hexdump of report elements> */
+#define COLOC_INTF_REPORT "COLOC-INTF-REPORT "
+
 /* MBO IE with cellular data connection preference received */
 #define MBO_CELL_PREFERENCE "MBO-CELL-PREFERENCE "