Cumulative patch from commit 2c0efd9e49b15da163cee659409eee85390620c3
2c0efd9 P2P: Fix stopping on search after SD callback
db3168d OpenSSL: Use SSL_cache_hit() when available
68ae477 OpenSSL: Use library wrapper functions to access cert store
abe96d0 P2P: Clean up Listen channel optimization debug prints
d2ca6ba Fix hostapd obss_interval documentation
d027c7b Fix 20/40 MHz co-ex report processing with obss_interval=0
93eca61 P2PS: Do not remove pending interface on p2p_stop_find
ae2dd83 P2PS: Allow PD retry in SEARCH and LISTEN_ONLY also
87d5ef5 P2PS: Add commands to control interface redir list
0cf12b3 P2PS: Send P2P_FIND_STOPPED event during P2P SD also
306aaf4 P2PS: Start WPS registrar upon GO formation
9e96e46 P2PS: PD Response processing
ab8ee77 P2PS: Provision Discovery fail event
1300cc8 P2PS: PD Request processing and PD Response building
5fefce2 P2PS: Callback to send P2PS provisioning events
9a58e52 P2PS: Callback to create pending group after sending PD Response
895d94d P2PS: Callback to remove stale persistent groups
f309c18 P2PS: ASP provisioning commands to control interface
6d90851 P2PS: Process P2PS provisioning commands
369678a P2PS: Add P2PS attributes into PD Request if requested
59fec34 P2PS: Allow p2p_build_ssid() to use pre-set SSID
d4b43b5 P2PS: Add support to send ASP-RESP events
6df08d0 P2PS: Logic to parse GAS requests for ASP services
5a4102c P2PS: Add support to send ASP service requests
095b3c4 P2PS: Add Application Service Info to device found events
4660e73 P2PS: Add Advertised Service Info into Probe Response frames
9e7321e P2PS: Parse Probe Request frames for matching ASP hashes
ae9d45f P2PS: Extend add/del services logic to support ASP
ea8e033 P2P: Allow p2p_get_group_num_members() to be called with NULL
4f88fc0 P2PS: WPS changes needed for P2PS default PIN
1a94b0a P2PS: Add service hash to Probe Request frames
5177509 P2PS: Add option to specify seek strings into P2P_FIND
5f18501 P2PS: Helper functions to build new P2P attributes
60d1148 P2PS: Add parsing of new P2P attributes
b9348be P2PS: Add new P2P identifier assignments from P2P spec v1.5
c3d6c71 Add helper functions for escaping and unescaping UTF-8
66eaf8a Fix driver-offloaded offchannel TX done processing
c5e154c P2P: Add P2P state into p2p_send_action_cb() debug entry
f2dc06e P2P: Ignore remain-on-channel callback event if not waiting for one
6a6569b HS 2.0R2: Add password to DB in case of machine managed subscription
f0d0a5d Improve BSS selection with default noise floor values
7f7bfba Add an option allow canned EAP-Success for wired IEEE 802.1X
49fcc32 EAP-MSCHAPv2 peer: Add option to disable password retry query
66bc683 hostapd: Simplify vlan_add_dynamic error paths
99805a0 Interworking: Convert wpa_printf() to wpa_msg()
b42f539 Add a variable to handle extra CFLAGS values
e6dd819 Work around Linux packet socket regression
7650f9e Fix resource leaks on rsn_preauth_init() error paths
a565e03 dhcp_snoop: Make IPv4 addresses human readable in debug log
2dd4f3a Fix STA re-bind to another VLAN on reauthentication
4437f8f Free old eap_user_file data on configuration change
1180dd6 WPA auth: Disconnect STA if MSK cannot be fetched
40aaa64 WPA auth: Clear temporary MSK storage from stack explicitly
01b481a Convert couple of remaining printf to wpa_printf in ap_list
bfaefd5 EAP-PEAP server: Fix Phase 2 TLV length in error case
745d936 mesh: Create new station entry on popen frames
41bff86 mesh: Always free the station if peering failed
871ff0b mesh: Sync plink state with kernel
ba42261 Simplify eapol_sm_notify_pmkid_attempt()
993a865 Add eap_session_id to wpa_supplicant STATUS output
f19c907 OpenSSL: Implement aes_wrap() and aes_unwrap()
fee31f7 OpenSSL: Remove support for versions older than 0.9.8
8bf3030 OpenSSL: Use a common helper function for HMAC
983c6a6 OpenSSL: Replace internal HMAC-MD5 implementation
Change-Id: I5743003f14efae324537f7dc2c5e6ada892a33a7
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/wpa_supplicant/wpa_cli.c b/wpa_supplicant/wpa_cli.c
index 911effe..2f06c35 100644
--- a/wpa_supplicant/wpa_cli.c
+++ b/wpa_supplicant/wpa_cli.c
@@ -1825,6 +1825,20 @@
}
+static int wpa_cli_cmd_p2p_asp_provision(struct wpa_ctrl *ctrl, int argc,
+ char *argv[])
+{
+ return wpa_cli_cmd(ctrl, "P2P_ASP_PROVISION", 3, argc, argv);
+}
+
+
+static int wpa_cli_cmd_p2p_asp_provision_resp(struct wpa_ctrl *ctrl, int argc,
+ char *argv[])
+{
+ return wpa_cli_cmd(ctrl, "P2P_ASP_PROVISION_RESP", 2, argc, argv);
+}
+
+
static int wpa_cli_cmd_p2p_connect(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
@@ -1909,11 +1923,9 @@
{
char cmd[4096];
- if (argc != 2 && argc != 4) {
+ if (argc < 2) {
printf("Invalid P2P_SERV_DISC_REQ command: needs two "
- "arguments (address and TLVs) or four arguments "
- "(address, \"upnp\", version, search target "
- "(SSDP ST:)\n");
+ "or more arguments (address and TLVs)\n");
return -1;
}
@@ -1975,27 +1987,25 @@
static int wpa_cli_cmd_p2p_service_add(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
- char cmd[4096];
- int res;
+ if (argc < 3) {
+ printf("Invalid P2P_SERVICE_ADD command: needs 3-6 arguments\n");
+ return -1;
+ }
- if (argc != 3 && argc != 4) {
- printf("Invalid P2P_SERVICE_ADD command: needs three or four "
+ return wpa_cli_cmd(ctrl, "P2P_SERVICE_ADD", 3, argc, argv);
+}
+
+
+static int wpa_cli_cmd_p2p_service_rep(struct wpa_ctrl *ctrl, int argc,
+ char *argv[])
+{
+ if (argc < 5 || argc > 6) {
+ printf("Invalid P2P_SERVICE_REP command: needs 5-6 "
"arguments\n");
return -1;
}
- if (argc == 4)
- res = os_snprintf(cmd, sizeof(cmd),
- "P2P_SERVICE_ADD %s %s %s %s",
- argv[0], argv[1], argv[2], argv[3]);
- else
- res = os_snprintf(cmd, sizeof(cmd),
- "P2P_SERVICE_ADD %s %s %s",
- argv[0], argv[1], argv[2]);
- if (os_snprintf_error(sizeof(cmd), res))
- return -1;
- cmd[sizeof(cmd) - 1] = '\0';
- return wpa_ctrl_command(ctrl, cmd);
+ return wpa_cli_cmd(ctrl, "P2P_SERVICE_REP", 5, argc, argv);
}
@@ -2882,6 +2892,12 @@
"[timeout] [type=*] = find P2P Devices for up-to timeout seconds" },
{ "p2p_stop_find", wpa_cli_cmd_p2p_stop_find, NULL, cli_cmd_flag_none,
"= stop P2P Devices search" },
+ { "p2p_asp_provision", wpa_cli_cmd_p2p_asp_provision, NULL,
+ cli_cmd_flag_none,
+ "<addr> adv_id=<adv_id> conncap=<conncap> [info=<infodata>] = provision with a P2P ASP Device" },
+ { "p2p_asp_provision_resp", wpa_cli_cmd_p2p_asp_provision_resp, NULL,
+ cli_cmd_flag_none,
+ "<addr> adv_id=<adv_id> [role<conncap>] [info=<infodata>] = provision with a P2P ASP Device" },
{ "p2p_connect", wpa_cli_cmd_p2p_connect, wpa_cli_complete_p2p_connect,
cli_cmd_flag_none,
"<addr> <\"pbc\"|PIN> [ht40] = connect to a P2P Device" },
@@ -2918,8 +2934,12 @@
"= remove all stored service entries" },
{ "p2p_service_add", wpa_cli_cmd_p2p_service_add, NULL,
cli_cmd_flag_none,
- "<bonjour|upnp> <query|version> <response|service> = add a local "
+ "<bonjour|upnp|asp> <query|version> <response|service> = add a local "
"service" },
+ { "p2p_service_rep", wpa_cli_cmd_p2p_service_rep, NULL,
+ cli_cmd_flag_none,
+ "asp <auto> <adv_id> <svc_state> <svc_string> [<svc_info>] = replace "
+ "local ASP service" },
{ "p2p_service_del", wpa_cli_cmd_p2p_service_del, NULL,
cli_cmd_flag_none,
"<bonjour|upnp> <query|version> [|service] = remove a local "