diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index 3b1548c..4e6202b 100644
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -99,19 +99,18 @@
 
 # Operation mode (a = IEEE 802.11a, b = IEEE 802.11b, g = IEEE 802.11g,
 # Default: IEEE 802.11b
-hw_mode=a
+hw_mode=g
 
 # Channel number (IEEE 802.11)
 # (default: 0, i.e., not set)
-# Please note that some drivers (e.g., madwifi) do not use this value from
-# hostapd and the channel will need to be configuration separately with
-# iwconfig.
-channel=60
+# Please note that some drivers do not use this value from hostapd and the
+# channel will need to be configured separately with iwconfig.
+channel=1
 
 # Beacon interval in kus (1.024 ms) (default: 100; range 15..65535)
 beacon_int=100
 
-# DTIM (delivery trafic information message) period (range 1..255):
+# DTIM (delivery traffic information message) period (range 1..255):
 # number of beacons between DTIMs (1 = every beacon includes DTIM element)
 # (default: 2)
 dtim_period=2
@@ -340,6 +339,12 @@
 # the STA with a data frame.
 # default: 300 (i.e., 5 minutes)
 #ap_max_inactivity=300
+#
+# The inactivity polling can be disabled to disconnect stations based on
+# inactivity timeout so that idle stations are more likely to be disconnected
+# even if they are still in range of the AP. This can be done by setting
+# skip_inactivity_poll to 1 (default 0).
+#skip_inactivity_poll=0
 
 # Disassociate stations based on excessive transmission failures or other
 # indications of connection loss. This depends on the driver capabilities and
@@ -511,6 +516,10 @@
 # Fragment size for EAP methods
 #fragment_size=1400
 
+# Finite cyclic group for EAP-pwd. Number maps to group of domain parameters
+# using the IANA repository for IKE (RFC 2409).
+#pwd_group=19
+
 # Configuration data for EAP-SIM database/authentication gateway interface.
 # This is a text string in implementation specific format. The example
 # implementation in eap_sim_db.c uses this as the UNIX domain socket name for
@@ -673,6 +682,7 @@
 # Enable WPA. Setting this variable configures the AP to require WPA (either
 # WPA-PSK or WPA-RADIUS/EAP based on other configuration). For WPA-PSK, either
 # wpa_psk or wpa_passphrase must be set and wpa_key_mgmt must include WPA-PSK.
+# Instead of wpa_psk / wpa_passphrase, wpa_psk_radius might suffice.
 # For WPA-RADIUS/EAP, ieee8021x must be set (but without dynamic WEP keys),
 # RADIUS authentication server must be configured, and WPA-EAP must be included
 # in wpa_key_mgmt.
@@ -697,6 +707,15 @@
 # configuration reloads.
 #wpa_psk_file=/etc/hostapd.wpa_psk
 
+# Optionally, WPA passphrase can be received from RADIUS authentication server
+# This requires macaddr_acl to be set to 2 (RADIUS)
+# 0 = disabled (default)
+# 1 = optional; use default passphrase/psk if RADIUS server does not include
+#	Tunnel-Password
+# 2 = required; reject authentication if RADIUS server does not include
+#	Tunnel-Password
+#wpa_psk_radius=0
+
 # Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The
 # entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be
 # added to enable SHA256-based stronger algorithms.
@@ -1008,6 +1027,12 @@
 # 12-digit, all-numeric code that identifies the consumer package.
 #upc=123456789012
 
+# WPS RF Bands (a = 5G, b = 2.4G, g = 2.4G, ag = dual band)
+# This value should be set according to RF band(s) supported by the AP if
+# hw_mode is not set. For dual band dual concurrent devices, this needs to be
+# set to ag to allow both RF bands to be advertized.
+#wps_rf_bands=ag
+
 ##### Wi-Fi Direct (P2P) ######################################################
 
 # Enable P2P Device management
@@ -1024,6 +1049,75 @@
 # Prohibit use of TDLS Channel Switching in this BSS
 #tdls_prohibit_chan_switch=1
 
+##### IEEE 802.11v-2011 #######################################################
+
+# Time advertisement
+# 0 = disabled (default)
+# 2 = UTC time at which the TSF timer is 0
+#time_advertisement=2
+
+# Local time zone as specified in 8.3 of IEEE Std 1003.1-2004:
+# stdoffset[dst[offset][,start[/time],end[/time]]]
+#time_zone=EST5
+
+##### IEEE 802.11u-2011 #######################################################
+
+# Enable Interworking service
+#interworking=1
+
+# Access Network Type
+# 0 = Private network
+# 1 = Private network with guest access
+# 2 = Chargeable public network
+# 3 = Free public network
+# 4 = Personal device network
+# 5 = Emergency services only network
+# 14 = Test or experimental
+# 15 = Wildcard
+#access_network_type=0
+
+# Whether the network provides connectivity to the Internet
+# 0 = Unspecified
+# 1 = Network provides connectivity to the Internet
+#internet=1
+
+# Additional Step Required for Access
+# Note: This is only used with open network, i.e., ASRA shall ne set to 0 if
+# RSN is used.
+#asra=0
+
+# Emergency services reachable
+#esr=0
+
+# Unauthenticated emergency service accessible
+#uesa=0
+
+# Venue Info (optional)
+# The available values are defined in IEEE Std 802.11u-2011, 7.3.1.34.
+# Example values (group,type):
+# 0,0 = Unspecified
+# 1,7 = Convention Center
+# 1,13 = Coffee Shop
+# 2,0 = Unspecified Business
+# 7,1  Private Residence
+#venue_group=7
+#venue_type=1
+
+# Homogeneous ESS identifier (optional; dot11HESSID)
+# If set, this shall be identifical to one of the BSSIDs in the homogeneous
+# ESS and this shall be set to the same value across all BSSs in homogeneous
+# ESS.
+#hessid=02:03:04:05:06:07
+
+# Roaming Consortium List
+# Arbitrary number of Roaming Consortium OIs can be configured with each line
+# adding a new OI to the list. The first three entries are available through
+# Beacon and Probe Response frames. Any additional entry will be available only
+# through ANQP queries. Each OI is between 3 and 15 octets and is configured a
+# a hexstring.
+#roaming_consortium=021122
+#roaming_consortium=2233445566
+
 ##### Multiple BSSID support ##################################################
 #
 # Above configuration is using the default interface (wlan#, or multi-SSID VLAN