Cumulative patch from commit ee48f48ba
The following commits are merged as well as changes in
./wpa_supplicant/hidl/1.3 to fix compilation errors.
ee48f48ba hostapd: Support showing neighbor list through hostapd_cli
3204795d7 STA OBSS: Add check for overlapping BSSs
3af78a4e0 Extract BSS coex 40 MHz check into a separate function
70755e658 Allow removing neighbor DB entries by BSSID alone
bf3ab50f4 Change some RRM debug messages from wpa_printf() to wpa_dbg()
a737e40b5 drivers: Support of dynamic VLAN requires Linux ioctls
9b391715c mesh: Allow group management cipher to be configured
65d0b67c2 mesh: Increase plink action frame AMPY buffer length for max GTK/IGTK
b1b62a136 WPS: Add WPS-PIN-ACTIVE and WPS-CANCEL events
0b1839405 Add "reconnect" cmdline argument to hostapd_cli/wpa_cli
4318a635a DBus: Update dont_quote[] with new network profile parameters
26a00ba8b DBus: Remove not existing network profile params from dont_quote[]
23d87687c dbus: Move roam metrics to the correct interface
8e111157e nl80211: Relax bridge setup
3626e72c8 l2_packet: Fix bridge workaround for repeater configuration
84972999b FT: More debug prints for RSNE modification for EAPOL-Key msg 2/4
4cfa8b92b Fix wpa_insert_pmkid() when buffer includes extra IEs
32289112c wpa_passphrase: Output errors to stderr
07fe134d9 EAP-SIM peer: Do not accept SIM/Challenge without SIM/Start
b2e2a8588 OpenSSL: Extend key_block size determination to support GCM/CCM ciphers
efaa6256e More detailed documentation on ieee80211w configuration parameter
1730a6a5e nl80211: Fix couple of typos in a comment
307cfc328 Strip trailing zero data in EAPOL-Key msg 1/4 when no PMKID to send
2c5ccfa60 nl80211: Initialize full channel info struct even if channel is not known
e6d3aca9c WPS: Add prefixes to public event_* functions
2ba6aa604 Fix memory leak in case allocation of token fails during JSON parsing
84877f253 wpa_supplicant: Do not try to detect PSK mismatch during PTK rekeying
78d338d1b DPP: Fix a memory leak on an error path
9be30ffc1 DPP: Abort ongoing scan if connection status needs to be sent
3f3876344 SAE: Enable NEED_DH_GROUPS_ALL for CONFIG_TESTING_OPTIONS=y builds
1f1567d2a QCA vendor command for getting STA information
e5620bf02 6 GHz: Select channel width using configured op_class
0bfc04b8d Do not enable HT/VHT when operating in 6 GHz band
da8570f4c Allow non-PCS 6 GHz channels to be excluded from ACS
59bb72642 Allow ACS channel list to be configured as frequencies (in MHz)
5f9b4afdf Use frequency in HT/VHT validation steps done before starting AP
59e33b4a9 ACS: Select current hw_mode based on the selected frequency
bb781c763 AP: Populate iface->freq before starting AP
41cac481a ACS: Use frequency params in ACS (offload) completed event interface
840532aea Search through all hw_features sets in hw_get_channel_freq()
15d356873 ACS: Add channels from all modes matching with configured hw mode
996662250 P2P: Add support for EDMG channels
f86e34168 Update operating classes and channels for the 60 GHz band
a19277a28 Add EDMG bandwidth to channel frequency APIs
5a563a3d3 Avoid compiler warning on shadowing a local variable
e3c476bd8 SAE H2E: Fix RSNXE override in EAPOL-Key msg 2/4 for testing purposes
7fde39fb1 Add sae_rejected_groups to hostapd STA control interface command
5661ebd77 DPP: Configurator netRole for Enrollee
740457445 DPP: Replace ap boolean with netRole enum in Configurator params
f2c4b44b4 SAE H2E: RSNXE override in EAPOL-Key msg 3/4
132565539 SAE H2E: RSNXE override for testing purposes
a889e9a70 SAE: Reject invalid rejected group report in SAE commit explicitly (AP)
c88e01e1b SAE H2E: Fix validation of rejected groups list
b834e9700 SAE H2E: Testing option to report extra rejected groups
918df2227 SAE: Reject unexpected Status Code in SAE commit explicitly (AP)
405946d76 SAE: Testing option to ignore H2E requirement mismatch
23acdd9f3 Fix memory leak in ACS offload operation
e86ba912a ACS: Remove redundant ch_list parameters from do_acs interface
3cf360b8e DFS: Don't handle DFS ops for 6 GHz channels
ee0030e81 6 GHz: Do not check for HT capability on 6 GHz channels
e780b4bf2 DPP: Bootstrapping via NFC URI Record
3c0d6eb8a Sync with mac80211-next.git include/uapi/linux/nl80211.h
38203148e Extend hostapd to support setband to driver via QCA vendor command
3c13af557 hostapd: Register wpa_msg callback even if only global ctrl_iface is used
e92080568 hostapd: Extend global control interface notifications
9f50538e1 SAE H2E: Do not use sae_h2e param in AP mode if SAE is disabled
181bf9336 DPP2: Report received ssid_charset as DPP-CONFOBJ-SSID-CHARSET event
71e2848ea DPP2: ssid64/ssid_charset in Configurator
57a63b131 DPP2: Add parsing of ssid64/ssid_charset in Config Object
590bc64d6 DPP: Use JSON token builder helpers
e75ab5322 JSON: Add helper functions for building tokens
8e5e36a18 Clean up base64_{encode,decode} pointer types
b22608423 Clean up base64_url_{encode,decode} pointer types
a4255a207 Simplify base64_url_encode() prototype
c54227c26 DPP2: Replace connectionStatus object ssid with ssid64
31b6eb417 tests: Update SAE H2E test case to match SSWU parameter z change
0432237a4 SAE H2E: Update SSWU curve-specific parameter z values
5b50265e1 WMM: Do not modify input TSPEC buffer during processing
783a99b73 HS2.0: Skip check for roaming_consortium for NAI realm query
f3c077929 P2P: Fix listen state machine getting stuck in send_action() scheduled case
530b8ee3c hostapd: Update DFS status in VHT80+80 mode
93ba13bcf Fix status code in SAE/DPP association PMKID mismatch (driver-AP-SME)
b90d2f7ff Fix a typo in a comment
Bug: 146900007
Test: Device boots up and connects to wifi networks, run traffic.
Test: Able to turn on/off softap, associate wifi STA, run traffic.
Test: Regression test Passed (Bug: 146905211)
Change-Id: Idc3584b491429a2e4935068a293bff572fc9d62e
diff --git a/src/ap/drv_callbacks.c b/src/ap/drv_callbacks.c
index 3198bd5..8a4b0ef 100644
--- a/src/ap/drv_callbacks.c
+++ b/src/ap/drv_callbacks.c
@@ -17,6 +17,7 @@
#include "common/wpa_ctrl.h"
#include "common/dpp.h"
#include "common/sae.h"
+#include "common/hw_features_common.h"
#include "crypto/random.h"
#include "p2p/p2p.h"
#include "wps/wps.h"
@@ -344,6 +345,9 @@
} else if (res == WPA_INVALID_MGMT_GROUP_CIPHER) {
reason = WLAN_REASON_CIPHER_SUITE_REJECTED;
status = WLAN_STATUS_CIPHER_REJECTED_PER_POLICY;
+ } else if (res == WPA_INVALID_PMKID) {
+ reason = WLAN_REASON_INVALID_PMKID;
+ status = WLAN_STATUS_INVALID_PMKID;
} else {
reason = WLAN_REASON_INVALID_IE;
status = WLAN_STATUS_INVALID_IE;
@@ -932,6 +936,7 @@
{
int ret, i;
int err = 0;
+ struct hostapd_channel_data *pri_chan;
if (hapd->iconf->channel) {
wpa_printf(MSG_INFO, "ACS: Channel was already set to %d",
@@ -939,12 +944,20 @@
return;
}
+ hapd->iface->freq = acs_res->pri_freq;
+
if (!hapd->iface->current_mode) {
for (i = 0; i < hapd->iface->num_hw_features; i++) {
struct hostapd_hw_modes *mode =
&hapd->iface->hw_features[i];
if (mode->mode == acs_res->hw_mode) {
+ if (hapd->iface->freq > 0 &&
+ !hw_get_chan(mode->mode,
+ hapd->iface->freq,
+ hapd->iface->hw_features,
+ hapd->iface->num_hw_features))
+ continue;
hapd->iface->current_mode = mode;
break;
}
@@ -958,24 +971,33 @@
}
}
- hapd->iface->freq = hostapd_hw_get_freq(hapd, acs_res->pri_channel);
-
- if (!acs_res->pri_channel) {
+ if (!acs_res->pri_freq) {
hostapd_logger(hapd, NULL, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_WARNING,
"driver switched to bad channel");
err = 1;
goto out;
}
+ pri_chan = hw_get_channel_freq(hapd->iface->current_mode->mode,
+ acs_res->pri_freq, NULL,
+ hapd->iface->hw_features,
+ hapd->iface->num_hw_features);
+ if (!pri_chan) {
+ wpa_printf(MSG_ERROR,
+ "ACS: Could not determine primary channel number from pri_freq %u",
+ acs_res->pri_freq);
+ err = 1;
+ goto out;
+ }
- hapd->iconf->channel = acs_res->pri_channel;
+ hapd->iconf->channel = pri_chan->chan;
hapd->iconf->acs = 1;
- if (acs_res->sec_channel == 0)
+ if (acs_res->sec_freq == 0)
hapd->iconf->secondary_channel = 0;
- else if (acs_res->sec_channel < acs_res->pri_channel)
+ else if (acs_res->sec_freq < acs_res->pri_freq)
hapd->iconf->secondary_channel = -1;
- else if (acs_res->sec_channel > acs_res->pri_channel)
+ else if (acs_res->sec_freq > acs_res->pri_freq)
hapd->iconf->secondary_channel = 1;
else {
wpa_printf(MSG_ERROR, "Invalid secondary channel!");