Cumulative patch from commit ee48f48ba
The following commits are merged as well as changes in
./wpa_supplicant/hidl/1.3 to fix compilation errors.
ee48f48ba hostapd: Support showing neighbor list through hostapd_cli
3204795d7 STA OBSS: Add check for overlapping BSSs
3af78a4e0 Extract BSS coex 40 MHz check into a separate function
70755e658 Allow removing neighbor DB entries by BSSID alone
bf3ab50f4 Change some RRM debug messages from wpa_printf() to wpa_dbg()
a737e40b5 drivers: Support of dynamic VLAN requires Linux ioctls
9b391715c mesh: Allow group management cipher to be configured
65d0b67c2 mesh: Increase plink action frame AMPY buffer length for max GTK/IGTK
b1b62a136 WPS: Add WPS-PIN-ACTIVE and WPS-CANCEL events
0b1839405 Add "reconnect" cmdline argument to hostapd_cli/wpa_cli
4318a635a DBus: Update dont_quote[] with new network profile parameters
26a00ba8b DBus: Remove not existing network profile params from dont_quote[]
23d87687c dbus: Move roam metrics to the correct interface
8e111157e nl80211: Relax bridge setup
3626e72c8 l2_packet: Fix bridge workaround for repeater configuration
84972999b FT: More debug prints for RSNE modification for EAPOL-Key msg 2/4
4cfa8b92b Fix wpa_insert_pmkid() when buffer includes extra IEs
32289112c wpa_passphrase: Output errors to stderr
07fe134d9 EAP-SIM peer: Do not accept SIM/Challenge without SIM/Start
b2e2a8588 OpenSSL: Extend key_block size determination to support GCM/CCM ciphers
efaa6256e More detailed documentation on ieee80211w configuration parameter
1730a6a5e nl80211: Fix couple of typos in a comment
307cfc328 Strip trailing zero data in EAPOL-Key msg 1/4 when no PMKID to send
2c5ccfa60 nl80211: Initialize full channel info struct even if channel is not known
e6d3aca9c WPS: Add prefixes to public event_* functions
2ba6aa604 Fix memory leak in case allocation of token fails during JSON parsing
84877f253 wpa_supplicant: Do not try to detect PSK mismatch during PTK rekeying
78d338d1b DPP: Fix a memory leak on an error path
9be30ffc1 DPP: Abort ongoing scan if connection status needs to be sent
3f3876344 SAE: Enable NEED_DH_GROUPS_ALL for CONFIG_TESTING_OPTIONS=y builds
1f1567d2a QCA vendor command for getting STA information
e5620bf02 6 GHz: Select channel width using configured op_class
0bfc04b8d Do not enable HT/VHT when operating in 6 GHz band
da8570f4c Allow non-PCS 6 GHz channels to be excluded from ACS
59bb72642 Allow ACS channel list to be configured as frequencies (in MHz)
5f9b4afdf Use frequency in HT/VHT validation steps done before starting AP
59e33b4a9 ACS: Select current hw_mode based on the selected frequency
bb781c763 AP: Populate iface->freq before starting AP
41cac481a ACS: Use frequency params in ACS (offload) completed event interface
840532aea Search through all hw_features sets in hw_get_channel_freq()
15d356873 ACS: Add channels from all modes matching with configured hw mode
996662250 P2P: Add support for EDMG channels
f86e34168 Update operating classes and channels for the 60 GHz band
a19277a28 Add EDMG bandwidth to channel frequency APIs
5a563a3d3 Avoid compiler warning on shadowing a local variable
e3c476bd8 SAE H2E: Fix RSNXE override in EAPOL-Key msg 2/4 for testing purposes
7fde39fb1 Add sae_rejected_groups to hostapd STA control interface command
5661ebd77 DPP: Configurator netRole for Enrollee
740457445 DPP: Replace ap boolean with netRole enum in Configurator params
f2c4b44b4 SAE H2E: RSNXE override in EAPOL-Key msg 3/4
132565539 SAE H2E: RSNXE override for testing purposes
a889e9a70 SAE: Reject invalid rejected group report in SAE commit explicitly (AP)
c88e01e1b SAE H2E: Fix validation of rejected groups list
b834e9700 SAE H2E: Testing option to report extra rejected groups
918df2227 SAE: Reject unexpected Status Code in SAE commit explicitly (AP)
405946d76 SAE: Testing option to ignore H2E requirement mismatch
23acdd9f3 Fix memory leak in ACS offload operation
e86ba912a ACS: Remove redundant ch_list parameters from do_acs interface
3cf360b8e DFS: Don't handle DFS ops for 6 GHz channels
ee0030e81 6 GHz: Do not check for HT capability on 6 GHz channels
e780b4bf2 DPP: Bootstrapping via NFC URI Record
3c0d6eb8a Sync with mac80211-next.git include/uapi/linux/nl80211.h
38203148e Extend hostapd to support setband to driver via QCA vendor command
3c13af557 hostapd: Register wpa_msg callback even if only global ctrl_iface is used
e92080568 hostapd: Extend global control interface notifications
9f50538e1 SAE H2E: Do not use sae_h2e param in AP mode if SAE is disabled
181bf9336 DPP2: Report received ssid_charset as DPP-CONFOBJ-SSID-CHARSET event
71e2848ea DPP2: ssid64/ssid_charset in Configurator
57a63b131 DPP2: Add parsing of ssid64/ssid_charset in Config Object
590bc64d6 DPP: Use JSON token builder helpers
e75ab5322 JSON: Add helper functions for building tokens
8e5e36a18 Clean up base64_{encode,decode} pointer types
b22608423 Clean up base64_url_{encode,decode} pointer types
a4255a207 Simplify base64_url_encode() prototype
c54227c26 DPP2: Replace connectionStatus object ssid with ssid64
31b6eb417 tests: Update SAE H2E test case to match SSWU parameter z change
0432237a4 SAE H2E: Update SSWU curve-specific parameter z values
5b50265e1 WMM: Do not modify input TSPEC buffer during processing
783a99b73 HS2.0: Skip check for roaming_consortium for NAI realm query
f3c077929 P2P: Fix listen state machine getting stuck in send_action() scheduled case
530b8ee3c hostapd: Update DFS status in VHT80+80 mode
93ba13bcf Fix status code in SAE/DPP association PMKID mismatch (driver-AP-SME)
b90d2f7ff Fix a typo in a comment
Bug: 146900007
Test: Device boots up and connects to wifi networks, run traffic.
Test: Able to turn on/off softap, associate wifi STA, run traffic.
Test: Regression test Passed (Bug: 146905211)
Change-Id: Idc3584b491429a2e4935068a293bff572fc9d62e
diff --git a/hostapd/hostapd_cli.c b/hostapd/hostapd_cli.c
index 42edb7b..440664e 100644
--- a/hostapd/hostapd_cli.c
+++ b/hostapd/hostapd_cli.c
@@ -54,7 +54,7 @@
fprintf(stderr, "%s\n", hostapd_cli_version);
fprintf(stderr,
"\n"
- "usage: hostapd_cli [-p<path>] [-i<ifname>] [-hvB] "
+ "usage: hostapd_cli [-p<path>] [-i<ifname>] [-hvBr] "
"[-a<path>] \\\n"
" [-P<pid file>] [-G<ping interval>] [command..]\n"
"\n"
@@ -68,6 +68,9 @@
" -a<file> run in daemon mode executing the action file "
"based on events\n"
" from hostapd\n"
+ " -r try to reconnect when client socket is "
+ "disconnected.\n"
+ " This is useful only when used with -a.\n"
" -B run a daemon in the background\n"
" -i<ifname> Interface to listen on (default: first "
"interface found in the\n"
@@ -1309,24 +1312,17 @@
}
+static int hostapd_cli_cmd_show_neighbor(struct wpa_ctrl *ctrl, int argc,
+ char *argv[])
+{
+ return wpa_ctrl_command(ctrl, "SHOW_NEIGHBOR");
+}
+
+
static int hostapd_cli_cmd_remove_neighbor(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
- char cmd[400];
- int res;
-
- if (argc != 2) {
- printf("Invalid remove_neighbor command: needs 2 arguments\n");
- return -1;
- }
-
- res = os_snprintf(cmd, sizeof(cmd), "REMOVE_NEIGHBOR %s %s",
- argv[0], argv[1]);
- if (os_snprintf_error(sizeof(cmd), res)) {
- printf("Too long REMOVE_NEIGHBOR command.\n");
- return -1;
- }
- return wpa_ctrl_command(ctrl, cmd);
+ return hostapd_cli_cmd(ctrl, "REMOVE_NEIGHBOR", 1, argc, argv);
}
@@ -1633,8 +1629,10 @@
{ "set_neighbor", hostapd_cli_cmd_set_neighbor, NULL,
"<addr> <ssid=> <nr=> [lci=] [civic=] [stat]\n"
" = add AP to neighbor database" },
+ { "show_neighbor", hostapd_cli_cmd_show_neighbor, NULL,
+ " = show neighbor database entries" },
{ "remove_neighbor", hostapd_cli_cmd_remove_neighbor, NULL,
- "<addr> <ssid=> = remove AP from neighbor database" },
+ "<addr> [ssid=<hex>] = remove AP from neighbor database" },
{ "req_lci", hostapd_cli_cmd_req_lci, hostapd_complete_stations,
"<addr> = send LCI request to a station"},
{ "req_range", hostapd_cli_cmd_req_range, NULL,
@@ -2007,12 +2005,13 @@
int warning_displayed = 0;
int c;
int daemonize = 0;
+ int reconnect = 0;
if (os_program_init())
return -1;
for (;;) {
- c = getopt(argc, argv, "a:BhG:i:p:P:s:v");
+ c = getopt(argc, argv, "a:BhG:i:p:P:rs:v");
if (c < 0)
break;
switch (c) {
@@ -2041,6 +2040,9 @@
case 'P':
pid_file = optarg;
break;
+ case 'r':
+ reconnect = 1;
+ break;
case 's':
client_socket_dir = optarg;
break;
@@ -2083,8 +2085,7 @@
printf("Connection established.\n");
break;
}
-
- if (!interactive) {
+ if (!interactive && !reconnect) {
perror("Failed to connect to hostapd - "
"wpa_ctrl_open");
return -1;
@@ -2102,8 +2103,14 @@
return -1;
if (daemonize && os_daemonize(pid_file) && eloop_sock_requeue())
return -1;
-
- if (interactive)
+ if (reconnect && action_file && ctrl_ifname) {
+ while (!hostapd_cli_quit) {
+ if (ctrl_conn)
+ hostapd_cli_action(ctrl_conn);
+ os_sleep(1, 0);
+ hostapd_cli_reconnect(ctrl_ifname);
+ }
+ } else if (interactive)
hostapd_cli_interactive();
else if (action_file)
hostapd_cli_action(ctrl_conn);