wpa_supplicant: Update to 07-Jul-2012 TOT
commit a5ed45586c63ffd8f9d2b44e27c251d7bacbeaf4
Author: Jouni Malinen <j@w1.fi>
Date: Sat Jul 7 13:01:45 2012 +0300
WPS SSDP: Fix socket leaks on error paths
Change-Id: I0864aac7fc88fa2a60f5cca7d524b94363410c85
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/hostapd/ChangeLog b/hostapd/ChangeLog
index 47f2423..9fc05f7 100644
--- a/hostapd/ChangeLog
+++ b/hostapd/ChangeLog
@@ -1,5 +1,112 @@
ChangeLog for hostapd
+2012-05-10 - v1.0
+ * Add channel selection support in hostapd. See hostapd.conf.
+ * Add support for IEEE 802.11v Time Advertisement mechanism with UTC
+ TSF offset. See hostapd.conf for config info.
+ * Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
+ This allows the driver to use PS buffering of Deauthentication and
+ Disassociation frames when the STA is in power save sleep. Only
+ available with drivers that provide TX status events for Deauth/
+ Disassoc frames (nl80211).
+ * Allow PMKSA caching to be disabled on the Authenticator. See
+ hostap.conf config parameter disable_pmksa_caching.
+ * atheros: Add support for IEEE 802.11w configuration.
+ * bsd: Add support for setting HT values in IFM_MMASK.
+ * Allow client isolation to be configured with ap_isolate. Client
+ isolation can be used to prevent low-level bridging of frames
+ between associated stations in the BSS. By default, this bridging
+ is allowed.
+ * Allow coexistance of HT BSSes with WEP/TKIP BSSes.
+ * Add require_ht config parameter, which can be used to configure
+ hostapd to reject association with any station that does not support
+ HT PHY.
+ * Add support for writing debug log to a file using "-f" option. Also
+ add relog CLI command to re-open the log file.
+ * Add bridge handling for WDS STA interfaces. By default they are
+ added to the configured bridge of the AP interface (if present),
+ but the user can also specify a separate bridge using cli command
+ wds_bridge.
+ * hostapd_cli:
+ - Add wds_bridge command for specifying bridge for WDS STA
+ interfaces.
+ - Add relog command for reopening log file.
+ - Send AP-STA-DISCONNECTED event when an AP disconnects a station
+ due to inactivity.
+ - Add wps_config ctrl_interface command for configuring AP. This
+ command can be used to configure the AP using the internal WPS
+ registrar. It works in the same way as new AP settings received
+ from an ER.
+ - Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
+ - Add command get version, that returns hostapd version string.
+ * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
+ Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
+ notification to the STA.
+ * Allow AP mode to disconnect STAs based on low ACK condition (when
+ the data connection is not working properly, e.g., due to the STA
+ going outside the range of the AP). Disabled by default, enable by
+ config option disassoc_low_ack.
+ * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
+ config file.
+ * WPS:
+ - Send AP Settings as a wrapped Credential attribute to ctrl_iface
+ in WPS-NEW-AP-SETTINGS.
+ - Dispatch more WPS events through hostapd ctrl_iface.
+ - Add mechanism for indicating non-standard WPS errors.
+ - Change concurrent radio AP to use only one WPS UPnP instance.
+ - Add wps_check_pin command for processing PIN from user input.
+ UIs can use this command to process a PIN entered by a user and to
+ validate the checksum digit (if present).
+ - Add hostap_cli get_config command to display current AP config.
+ - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
+ runtime and support dynamic AP PIN management.
+ - Disable AP PIN after 10 consecutive failures. Slow down attacks
+ on failures up to 10.
+ - Allow AP to start in Enrollee mode without AP PIN for probing,
+ to be compatible with Windows 7.
+ - Add Config Error into WPS-FAIL events to provide more info
+ to the user on how to resolve the issue.
+ - When controlling multiple interfaces:
+ - apply WPS commands to all interfaces configured to use WPS
+ - apply WPS config changes to all interfaces that use WPS
+ - when an attack is detected on any interface, disable AP PIN on
+ all interfaces
+ * WPS ER:
+ - Show SetSelectedRegistrar events as ctrl_iface events.
+ - Add special AP Setup Locked mode to allow read only ER.
+ ap_setup_locked=2 can now be used to enable a special mode where
+ WPS ER can learn the current AP settings, but cannot change them.
+ * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
+ - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
+ for testing protocol extensibility.
+ - Add build option CONFIG_WPS_STRICT to allow disabling of WPS
+ workarounds.
+ - Add support for AuthorizedMACs attribute.
+ * TDLS:
+ - Allow TDLS use or TDLS channel switching in the BSS to be
+ prohibited in the BSS, using config params tdls_prohibit and
+ tdls_prohibit_chan_switch.
+ * EAP server: Add support for configuring fragment size (see
+ fragment_size in hostapd.conf).
+ * wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
+ wlantest can be used to capture frames from a monitor interface
+ for realtime capturing or from pcap files for offline analysis.
+ * Interworking: Support added for 802.11u. Enable in .config with
+ CONFIG_INTERWORKING. See hostapd.conf for config parameters for
+ interworking.
+ * Android: Add build and runtime support for Android hostapd.
+ * Add a new debug message level for excessive information. Use
+ -ddd to enable.
+ * TLS: Add support for tls_disable_time_checks=1 in client mode.
+ * Internal TLS:
+ - Add support for TLS v1.1 (RFC 4346). Enable with build parameter
+ CONFIG_TLSV11.
+ - Add domainComponent parser for X.509 names
+ * Reorder some IEs to get closer to IEEE 802.11 standard. Move
+ WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
+ Move HT IEs to be later in (Re)Assoc Resp.
+ * Many bugfixes.
+
2010-04-18 - v0.7.2
* fix WPS internal Registrar use when an external Registrar is also
active