[wpa_supplicant] cumilative patch from commit bb945b98f
Bug: 275651698
Test: Connect to open, WPA2, WPA3 and passpoint network
Test: Establish P2P connection
Test: Basic SoftAp tests
Test: Regression test (b/275948027)
BYPASS_INCLUSIVE_LANGUAGE_REASON=Merged from opne source
bb945b98f Add 40 and 80 MHz channels 165 and 173 for 5 GHz IBSS/mesh
0059fa5ba 6 GHz: Fix secondary channel setting
744295c8b Add 6 GHz channel validation during channel switching
5349a45d3 Set interface state as inactive if mesh bringup fails
a4af79624 Handle signal termination in hostapd_cli for all cases
cf8f13ac8 Add support to send 320 MHz bandwidth through vendor subcmd
a0403c023 EHT: Validate the puncturing bitmap for ACS
af0f60e7d EHT: Calculate puncturing bitmap for ACS
f3206fbe9 EHT: Configuration option for ACS puncturing threshold
e3621867c EHT: Process puncturing bitmap from channel switch event
e277e577c nl80211: Send EHT puncturing bitmap to the driver for switch command
29a882bed EHT: Configure puncturing bitmap during channel switch
4942b19ff EHT: Send puncturing bitmap to the driver for AP bring up
f9fc2eabb EHT: Add puncturing bitmap to EHT Operation element
46a5d989d EHT: Downgrade bandwidths for VHT and HE when using puncturing
7618269ec EHT: Validate puncturing bitmap
9102fda31 EHT: Add configuration option for puncturing in AP mode
9e79439fc nl80211: Retrieve driver support for EHT puncturing
507be376c Sync with wireless-next.git include/uapi/linux/nl80211.h
591256a8c FILS: 320 MHz support in FD frame
903e3a1e6 FILS: Fix maximum NSS calculation for FD frame
ecae45ff6 FILS: Make HE a requirement for FILS discovery
4e86692ff AP: Fix 6 GHz AP setup after disable-enable
a34b8477a ml80211: Put wiphy idx to obtain correct country code
1491fc64a Define QCA vendor per-enum 64-bit pad attributes
55e31699e qca-vendor: Add QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NF_CAL_VAL
b1f85957c Add QCA vendor commands to set and get MLO links state information
44b32a752 mesh: Add EHT support
c4cb62ca8 WPA_AUTH: MLO: Add functions to get the AA and SPA
cab963e9f AP: Split check_assoc_ies()
7a7a2256c common: Support parsing link specific association request
b39e35693 common: Add support for clearing elements
0b2fc4268 common: Split ieee8021_parse_elems()
df6561ec0 nl80211: AP MLD support for adding multi link stations
b8b4ceb8d nl80211: Properly stop and deinit MLO AP
2f8fc46ed nl80211: Provide link_id in EAPOL_RX and RX_MGMT events
821374d43 nl80211: Introduce and implement a callback to add an MLO link for AP MLD
47269be36 nl80211: Refactor i802_bss to support multiple links
eb146ee80 AP: Add some bridge port attribute settings
f628e6b30 nl80211: Make sure scan frequency debug buffer is NUL terminated
41d23254b nl80211: Fix frequencies array boundary check for scanned frequencies
a9012070a Android: Add wowlan_disconnect_on_deinit to template configuration
e2ea0fd70 EST: Write the RSA private key using the standard PRIVATE KEY format
bfd236df2 webkit2: Avoid deprecated function call
2c3202682 P2P: Filter out 6 GHz frequencies if not allowed for P2P connection
b2bf7e39e Update PMK in wpa_sm when roam+auth event indicated with authorized flag
6b9c86466 nl80211: Replace the channel flags for VHT support
6f63aca7b DPP: Allow both STA and AP configObject to be set
7292e30b7 DPP: Fix @CONF-OBJ-SEP@ parsing for multiple configs
c31600ce1 P2P: Allow GO BSSID to be specified for P2P_GROUP_ADD commands
0430756e6 P2P: Optimize join scan frequency
b3921db42 nl80211: Add frequency info in start AP command
40c139664 macsec_linux: Add support for MACsec hardware offload
6d24673ab mka: Allow configuration of MACsec hardware offload
3081a9cb6 hostapd: Output country_code and country3 when using STATUS
91ad7a309 FT: Store PTKSA entry for the correct BSSID in the FT protocol case
3f3e356fa Mark addr argument to storing PTKSA const
242c3ad99 FT: Store PTKSA from FT protocol
ba6954874 Mark wpa_auth_remove_ptksa() static
3b1ad1334 FT: Include KDK in FT specific PTK derivation on the AP
870a5bdc0 nl80211: Report guard interval and dual carrier modulation
edcad193a dbus: Add inactive time to D-Bus signal info
a678a510f dbus: Add D-Bus signal for PSK mismatch heuristics
691f729d5 P2P: Make invitation flow less aggressive
f4a7e2a07 Rework IBSS/mesh 80 MHz channel selection
f91f971bd Fix creating 6 GHz IBSS/mesh on 5/6 GHz-capable PHYs
c623cee42 Make arrays static const in ibss_mesh_select_*()
64043e615 Split ibss_mesh_setup_freq() into multiple functions
8085a7e65 wpa_supplicant: Add option to explicitly set 4addr mode
1ffc7d1c6 Apply bias towards 6 GHz in roaming
faa410292 WNM: Event report handling for BSS color collision and in-use
97405be96 Small textual improvements to wpa_supplicant man page
ec02a0e93 hostapd: Output hw_mode when using STATUS
390e24c6c EAP-TTLS server: Add Ident field to MS-CHAP-Error
4ae798a22 P2P: Pick the best driver pref freq for invitation process
6c75f1dfa Send broadcast Probe Response frames on the 6 GHz band
edfcb2f1a MLD STA: Indicate MLO support in NL80211_CMD_CONNECT
c91852044 MLD STA: Add support for SAE external authentication offload to userspace
575712450 qca-vendor: Add QCA_WLAN_VENDOR_MCC_QUOTA_TYPE_LOW_LATENCY
ba150059d FT: Store PMK-R0/PMK-R1 after EAPOL-Key msg 2/4 MIC validation
56662f36d Refine vendor subcmd QCA_NL80211_VENDOR_SUBCMD_ROAM_STATS
72b8193f4 MACsec: Remove EAP Session-Id length constraint
3915e8834 hostapd: Report error on unknown ACCEPT_ACL/DENY_ACL commands
2cff340d1 utils: Move log2pcap to python3
12de8112b Fix BSS age underflow
d31c2b43a Fix segfault in case of an invalid configuration
a32b424a3 MLD STA: Use AP MLD address in PMKSA cache attempts for driver-SME case
8c4790cef MLD STA: Store PMKSA with AP MLD address for MLO connection event
bf124a03d SAE: Update PT value at later point for SME cases, if needed
1aadcca0a P2P: Enable SAE-H2E for client when joining a 6 GHz group
37f8257c4 SAE: Extend automatic enabling of H2E on 6 GHz to additional cases
89377c6b9 OCV: Fix build without CONFIG_OCV=y
2e47ea22c P2P: Fix handling Service Discovery Response received by GO device
dc7e330e0 Set OCV capability based on Association Request frame RSNE
831be6514 WPS: Do not indicate incorrect PBC overlap based on partner link
c9fc12425 P2P: Make wpas_p2p_notif_pbc_overlap() static
Change-Id: I1eb61fc82b98b937a2ff37a30e60e28129fe143d
Merged-In: I1eb61fc82b98b937a2ff37a30e60e28129fe143d
diff --git a/src/ap/beacon.c b/src/ap/beacon.c
index dbc6b06..c25a5bb 100644
--- a/src/ap/beacon.c
+++ b/src/ap/beacon.c
@@ -533,8 +533,7 @@
static u8 * hostapd_gen_probe_resp(struct hostapd_data *hapd,
const struct ieee80211_mgmt *req,
int is_p2p, size_t *resp_len,
- bool bcast_probe_resp, const u8 *known_bss,
- u8 known_bss_len)
+ const u8 *known_bss, u8 known_bss_len)
{
struct ieee80211_mgmt *resp;
u8 *pos, *epos, *csa_pos;
@@ -585,6 +584,8 @@
if (hapd->iconf->ieee80211be && !hapd->conf->disable_11be) {
buflen += hostapd_eid_eht_capab_len(hapd, IEEE80211_MODE_AP);
buflen += 3 + sizeof(struct ieee80211_eht_operation);
+ if (hapd->iconf->punct_bitmap)
+ buflen += EHT_OPER_DISABLED_SUBCHAN_BITMAP_SIZE;
}
#endif /* CONFIG_IEEE80211BE */
@@ -603,9 +604,16 @@
resp->frame_control = IEEE80211_FC(WLAN_FC_TYPE_MGMT,
WLAN_FC_STYPE_PROBE_RESP);
- if (req)
+ /* Unicast the response to all requests on bands other than 6 GHz. For
+ * the 6 GHz, unicast is used only if the actual SSID is not included in
+ * the Beacon frames. Otherwise, broadcast response is used per IEEE
+ * Std 802.11ax-2021, 26.17.2.3.2. Broadcast address is also used for
+ * the Probe Response frame template for the unsolicited (i.e., not as
+ * a response to a specific request) case. */
+ if (req && (!is_6ghz_op_class(hapd->iconf->op_class) ||
+ hapd->conf->ignore_broadcast_ssid))
os_memcpy(resp->da, req->sa, ETH_ALEN);
- else if (bcast_probe_resp)
+ else
os_memset(resp->da, 0xff, ETH_ALEN);
os_memcpy(resp->sa, hapd->own_addr, ETH_ALEN);
@@ -1230,7 +1238,7 @@
" signal=%d", MAC2STR(mgmt->sa), ssi_signal);
resp = hostapd_gen_probe_resp(hapd, mgmt, elems.p2p != NULL,
- &resp_len, false, elems.mbssid_known_bss,
+ &resp_len, elems.mbssid_known_bss,
elems.mbssid_known_bss_len);
if (resp == NULL)
return;
@@ -1301,7 +1309,7 @@
"this");
/* Generate a Probe Response template for the non-P2P case */
- return hostapd_gen_probe_resp(hapd, NULL, 0, resp_len, false, NULL, 0);
+ return hostapd_gen_probe_resp(hapd, NULL, 0, resp_len, NULL, 0);
}
#endif /* NEED_AP_MLME */
@@ -1320,7 +1328,7 @@
return hostapd_gen_probe_resp(hapd, NULL, 0,
¶ms->unsol_bcast_probe_resp_tmpl_len,
- true, NULL, 0);
+ NULL, 0);
}
#endif /* CONFIG_IEEE80211AX */
@@ -1351,6 +1359,9 @@
phy_index = FD_CAP_PHY_INDEX_HE;
switch (hapd->iconf->op_class) {
+ case 137:
+ chwidth = FD_CAP_BSS_CHWIDTH_320;
+ break;
case 135:
mcs_nss_size += 4;
/* fallthrough */
@@ -1404,14 +1415,37 @@
cap_info |= phy_index << FD_CAP_PHY_INDEX_SHIFT;
cap_info |= chwidth << FD_CAP_BSS_CHWIDTH_SHIFT;
- if (mode) {
- u16 *mcs = (u16 *) mode->he_capab[IEEE80211_MODE_AP].mcs;
+ if (mode && phy_index == FD_CAP_PHY_INDEX_HE) {
+ const u8 *he_mcs = mode->he_capab[IEEE80211_MODE_AP].mcs;
int i;
- u16 nss = 0;
+ u16 nss = 0, mcs[6];
+
+ os_memset(mcs, 0xffff, 6 * sizeof(u16));
+
+ if (mcs_nss_size == 4) {
+ mcs[0] = WPA_GET_LE16(&he_mcs[0]);
+ mcs[1] = WPA_GET_LE16(&he_mcs[2]);
+ }
+
+ if (mcs_nss_size == 8) {
+ mcs[2] = WPA_GET_LE16(&he_mcs[4]);
+ mcs[3] = WPA_GET_LE16(&he_mcs[6]);
+ }
+
+ if (mcs_nss_size == 12) {
+ mcs[4] = WPA_GET_LE16(&he_mcs[8]);
+ mcs[5] = WPA_GET_LE16(&he_mcs[10]);
+ }
for (i = 0; i < HE_NSS_MAX_STREAMS; i++) {
u16 nss_mask = 0x3 << (i * 2);
+ /*
+ * If NSS values supported by RX and TX are different
+ * then choose the smaller of the two as the maximum
+ * supported NSS as that is the value supported by
+ * both RX and TX.
+ */
if (mcs_nss_size == 4 &&
(((mcs[0] & nss_mask) == nss_mask) ||
((mcs[1] & nss_mask) == nss_mask)))
@@ -1655,6 +1689,8 @@
if (hapd->iconf->ieee80211be && !hapd->conf->disable_11be) {
tail_len += hostapd_eid_eht_capab_len(hapd, IEEE80211_MODE_AP);
tail_len += 3 + sizeof(struct ieee80211_eht_operation);
+ if (hapd->iconf->punct_bitmap)
+ tail_len += EHT_OPER_DISABLED_SUBCHAN_BITMAP_SIZE;
}
#endif /* CONFIG_IEEE80211BE */
@@ -2065,6 +2101,10 @@
params.fd_frame_tmpl = hostapd_fils_discovery(hapd, ¶ms);
#endif /* CONFIG_FILS */
+#ifdef CONFIG_IEEE80211BE
+ params.punct_bitmap = iconf->punct_bitmap;
+#endif /* CONFIG_IEEE80211BE */
+
if (cmode &&
hostapd_set_freq_params(&freq, iconf->hw_mode, iface->freq,
iconf->channel, iconf->enable_edmg,