runtime/doc/vim9.txt

*vim9.txt*	For Vim version 8.2.  Last change: 2021 Feb 03


		  VIM REFERENCE MANUAL	  by Bram Moolenaar


THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE

Vim9 script commands and expressions.			*Vim9* *vim9*

Most expression help is in |eval.txt|.  This file is about the new syntax and
features in Vim9 script.

THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE


1.  What is Vim9 script?		|Vim9-script|
2.  Differences				|vim9-differences|
3.  New style functions			|fast-functions|
4.  Types				|vim9-types|
5.  Namespace, Import and Export	|vim9script|
6.  Future work: classes		|vim9-classes|

9.  Rationale				|vim9-rationale|

==============================================================================

1. What is Vim9 script?					*Vim9-script*

THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE

Vim script has been growing over time, while preserving backwards
compatibility.  That means bad choices from the past often can't be changed
and compatibility with Vi restricts possible solutions.  Execution is quite
slow, each line is parsed every time it is executed.

The main goal of Vim9 script is to drastically improve performance.  This is
accomplished by compiling commands into instructions that can be efficiently
executed.  An increase in execution speed of 10 to 100 times can be expected.

A secondary goal is to avoid Vim-specific constructs and get closer to
commonly used programming languages, such as JavaScript, TypeScript and Java.

The performance improvements can only be achieved by not being 100% backwards
compatible.  For example, making function arguments available in the
"a:" dictionary adds quite a lot of overhead.  In a Vim9 function this
dictionary is not available.  Other differences are more subtle, such as how
errors are handled.

The Vim9 script syntax and semantics are used in:
- a function defined with the `:def` command
- a script file where the first command is `vim9script`
- an autocommand defined in the context of the above
- a command prefixed with the `vim9cmd` command modifier

When using `:function` in a Vim9 script file the legacy syntax is used, with
the highest |scriptversion|.  However, this can be confusing and is therefore
discouraged.

Vim9 script and legacy Vim script can be mixed.  There is no requirement to
rewrite old scripts, they keep working as before.  You may want to use a few
`:def` functions for code that needs to be fast.

						*:vim9* *:vim9cmd*
:vim9[cmd] {cmd}
		Execute {cmd} using Vim9 script syntax and semantics.
		Useful when typing a command and in a legacy script or
		function.

==============================================================================

2. Differences from legacy Vim script			*vim9-differences*

THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE

Overview ~

Brief summary of the differences you will most often encounter when using Vim9
script and `:def` functions; details are below:
- Comments start with #, not ": >
	echo "hello"   # comment
- Using a backslash for line continuation is hardly ever needed: >
	echo "hello "
	     .. yourName
	     .. ", how are you?"
- White space is required in many places.
- Assign values without `:let`, declare variables with `:var`: >
	var count = 0
	count += 3
- Constants can be declared with `:final` and `:const`: >
	final matches = []		  # add matches
	const names = ['Betty', 'Peter']  # cannot be changed
- `:final` cannot be used as an abbreviation of `:finally`.
- Variables and functions are script-local by default.
- Functions are declared with argument types and return type: >
	def CallMe(count: number, message: string): bool
- Call functions without `:call`: >
	writefile(['done'], 'file.txt')
- You cannot use `:xit`, `:t`, `:append`, `:change`, `:insert` or curly-braces
  names.
- A range before a command must be prefixed with a colon: >
	:%s/this/that
- Unless mentioned specifically, the highest |scriptversion| is used.


Comments starting with # ~

In legacy Vim script comments start with double quote.  In Vim9 script
comments start with #. >
	# declarations
	var count = 0  # number of occurrences

The reason is that a double quote can also be the start of a string. In many
places, especially halfway through an expression with a line break, it's hard
to tell what the meaning is, since both a string and a comment can be followed
by arbitrary text.  To avoid confusion only # comments are recognized.  This
is the same as in shell scripts and Python programs.

In Vi # is a command to list text with numbers.  In Vim9 script you can use
`:number` for that. >
	101 number

To improve readability there must be a space between a command and the #
that starts a comment: >
	var name = value # comment
	var name = value# error!

In legacy Vim script # is also used for the alternate file name.  In Vim9
script you need to use %% instead.  Instead of ## use %%% (stands for all
arguments).


Vim9 functions ~

A function defined with `:def` is compiled.  Execution is many times faster,
often 10x to 100x times.

Many errors are already found when compiling, before the function is executed.
The syntax is strict, to enforce code that is easy to read and understand.

Compilation is done when either of these is encountered:
- the first time the function is called
- when the `:defcompile` command is encountered in the script where the
  function was defined
- `:disassemble` is used for the function.
- a function that is compiled calls the function or uses it as a function
  reference

`:def` has no options like `:function` does: "range", "abort", "dict" or
"closure".  A `:def` function always aborts on an error (unless `:silent!` was
used for the command or inside a `:try` block), does not get a range passed
cannot be a "dict" function, and can always be a closure.

The argument types and return type need to be specified.  The "any" type can
be used, type checking will then be done at runtime, like with legacy
functions.

Arguments are accessed by name, without "a:", just like any other language.
There is no "a:" dictionary or "a:000" list.

Variable arguments are defined as the last argument, with a name and have a
list type, similar to TypeScript.  For example, a list of numbers: >
	def MyFunc(...itemlist: list<number>)
	   for item in itemlist
	     ...


Functions and variables are script-local by default ~
							*vim9-scopes*
When using `:function` or `:def` to specify a new function at the script level
in a Vim9 script, the function is local to the script, as if "s:" was
prefixed.  Using the "s:" prefix is optional.  To define a global function or
variable the "g:" prefix must be used.  For functions in an autoload script
the "name#" prefix is sufficient. >
	def ThisFunction()          # script-local
	def s:ThisFunction()        # script-local
	def g:ThatFunction()        # global
	def scriptname#function()   # autoload

When using `:function` or `:def` to specify a nested function inside a `:def`
function, this nested function is local to the code block it is defined in.
In a `:def` function it is not possible to define a script-local function.  It
is possible to define a global function by using the "g:" prefix.

When referring to a function and no "s:" or "g:" prefix is used, Vim will
search for the function:
- in the function scope, in block scopes
- in the script scope, possibly imported
- in the list of global functions
However, it is recommended to always use "g:" to refer to a global function
for clarity.

In all cases the function must be defined before used.  That is when it is
called, when `:defcompile` causes it to be compiled, or when code that calls
it is being compiled (to figure out the return type).

The result is that functions and variables without a namespace can usually be
found in the script, either defined there or imported.  Global functions and
variables could be defined anywhere (good luck finding out where!).

Global functions can still be defined and deleted at nearly any time.  In
Vim9 script script-local functions are defined once when the script is sourced
and cannot be deleted or replaced.

When compiling a function and a function call is encountered for a function
that is not (yet) defined, the |FuncUndefined| autocommand is not triggered.
You can use an autoload function if needed, or call a legacy function and have
|FuncUndefined| triggered there.


Reloading a Vim9 script clears functions and variables by default ~
							*vim9-reload*
When loading a legacy Vim script a second time nothing is removed, the
commands will replace existing variables and functions and create new ones.

When loading a Vim9 script a second time all existing script-local functions
and variables are deleted, thus you start with a clean slate.  This is useful
if you are developing a plugin and want to try a new version.  If you renamed
something you don't have to worry about the old name still hanging around.

If you do want to keep items, use: >
	vim9script noclear

You want to use this in scripts that use a `finish` command to bail out at
some point when loaded again.  E.g. when a buffer local option is set: >
	vim9script noclear
	setlocal completefunc=SomeFunc
	if exists('*g:SomeFunc') | finish | endif
	def g:SomeFunc()
	....


Variable declarations with :var, :final and :const ~
						*vim9-declaration* *:var*
Local variables need to be declared with `:var`.  Local constants need to be
declared with `:final` or `:const`.  We refer to both as "variables" in this
section.

Variables can be local to a script, function or code block: >
	vim9script
	var script_var = 123
	def SomeFunc()
	  var func_var = script_var
	  if cond
	    var block_var = func_var
	  ...

The variables are only visible in the block where they are defined and nested
blocks.  Once the block ends the variable is no longer accessible: >
	if cond
	   var inner = 5
	else
	   var inner = 0
	endif
	echo inner  # Error!

The declaration must be done earlier: >
	var inner: number
	if cond
	   inner = 5
	else
	   inner = 0
	endif
	echo inner

To intentionally hide a variable from code that follows, a block can be
used: >
	{
	   var temp = 'temp'
	   ...
	}
	echo temp  # Error!

Declaring a variable with a type but without an initializer will initialize to
zero, false or empty.

In Vim9 script `:let` cannot be used.  An existing variable is assigned to
without any command.  The same for global, window, tab, buffer and Vim
variables, because they are not really declared.  They can also be deleted
with `:unlet`.

Variables and functions cannot shadow previously defined or imported variables
and functions.
Variables may shadow Ex commands, rename the variable if needed.

Global variables and user defined functions must be prefixed with "g:", also
at the script level. >
	vim9script
	var script_local = 'text'
	g:global = 'value'
	var Funcref = g:ThatFunction

Since `&opt = value` is now assigning a value to option "opt", ":&" cannot be
used to repeat a `:substitute` command.


Constants ~
						*vim9-const* *vim9-final*
How constants work varies between languages.  Some consider a variable that
can't be assigned another value a constant.  JavaScript is an example.  Others
also make the value immutable, thus when a constant uses a list, the list
cannot be changed.  In Vim9 we can use both.

`:const` is used for making both the variable and the value a constant.  Use
this for composite structures that you want to make sure will not be modified.
Example: >
	const myList = [1, 2]
	myList = [3, 4]		# Error!
	myList[0] = 9		# Error!
	muList->add(3)		# Error!
<							*:final*
`:final` is used for making only the variable a constant, the value can be
changed.  This is well known from Java.  Example: >
	final myList = [1, 2]
	myList = [3, 4]		# Error!
	myList[0] = 9		# OK
	muList->add(3)		# OK

It is common to write constants as ALL_CAPS, but you don't have to.

The constant only applies to the value itself, not what it refers to. >
	final females = ["Mary"]
	const NAMES = [["John", "Peter"], females]
	NAMES[0] = ["Jack"]     # Error!
	NAMES[0][0] = "Jack"    # Error!
	NAMES[1] = ["Emma"]     # Error!
	NAMES[1][0] = "Emma"    # OK, now females[0] == "Emma"

<							*E1092*
Declaring more than one variable at a time, using the unpack notation, is
currently not supported: >
	var [v1, v2] = GetValues()  # Error!
That is because the type needs to be inferred from the list item type, which
isn't that easy.


Omitting :call and :eval ~

Functions can be called without `:call`: >
	writefile(lines, 'file')
Using `:call` is still possible, but this is discouraged.

A method call without `eval` is possible, so long as the start is an
identifier or can't be an Ex command.  Examples: >
	myList->add(123)
	g:myList->add(123)
	[1, 2, 3]->Process()
	{a: 1, b: 2}->Process()
	"foobar"->Process()
	("foobar")->Process()
	'foobar'->Process()
	('foobar')->Process()

In the rare case there is ambiguity between a function name and an Ex command,
prepend ":" to make clear you want to use the Ex command.  For example, there
is both the `:substitute` command and the `substitute()` function.  When the
line starts with `substitute(` this will use the function. Prepend a colon to
use the command instead: >
	:substitute(pattern (replacement (

Note that while variables need to be defined before they can be used,
functions can be called before being defined.  This is required to allow
for cyclic dependencies between functions.  It is slightly less efficient,
since the function has to be looked up by name.  And a typo in the function
name will only be found when the function is called.


Omitting function() ~

A user defined function can be used as a function reference in an expression
without `function()`. The argument types and return type will then be checked.
The function must already have been defined. >

	var Funcref = MyFunction

When using `function()` the resulting type is "func", a function with any
number of arguments and any return type.  The function can be defined later.


Lambda using => instead of -> ~

In legacy script there can be confusion between using "->" for a method call
and for a lambda.  Also, when a "{" is found the parser needs to figure out if
it is the start of a lambda or a dictionary, which is now more complicated
because of the use of argument types.

To avoid these problems Vim9 script uses a different syntax for a lambda,
which is similar to Javascript: >
	var Lambda = (arg) => expression

No line break is allowed in the arguments of a lambda up to and including the
"=>".  This is OK: >
	filter(list, (k, v) =>
			v > 0)
This does not work: >
	filter(list, (k, v)
			=> v > 0)
This also does not work: >
	filter(list, (k,
			v) => v > 0)
But you can use a backslash to concatenate the lines before parsing: >
	filter(list, (k,
		\	v)
		\	=> v > 0)

Additionally, a lambda can contain statements in {}: >
	var Lambda = (arg) => {
		g:was_called = 'yes'
		return expression
	    }
NOT IMPLEMENTED YET

							*vim9-curly*
To avoid the "{" of a dictionary literal to be recognized as a statement block
wrap it in parenthesis: >
	var Lambda = (arg) => ({key: 42})

Also when confused with the start of a command block: >
	({
	    key: value
	 })->method()


Automatic line continuation ~

In many cases it is obvious that an expression continues on the next line.  In
those cases there is no need to prefix the line with a backslash (see
|line-continuation|).  For example, when a list spans multiple lines: >
	var mylist = [
		'one',
		'two',
		]
And when a dict spans multiple lines: >
	var mydict = {
		one: 1,
		two: 2,
		}
Function call: >
	var result = Func(
			arg1,
			arg2
			)

For binary operators in expressions not in [], {} or () a line break is
possible just before or after the operator.  For example: >
	var text = lead
		   .. middle
		   .. end
	var total = start +
		    end -
		    correction
	var result = positive
			? PosFunc(arg)
			: NegFunc(arg)

For a method call using "->" and a member using a dot, a line break is allowed
before it: >
	var result = GetBuilder()
			->BuilderSetWidth(333)
			->BuilderSetHeight(777)
			->BuilderBuild()
	var result = MyDict
			.member

For commands that have an argument that is a list of commands, the | character
at the start of the line indicates line continuation: >
	autocmd BufNewFile *.match if condition
		|   echo 'match'
		| endif

<							*E1050*
To make it possible for the operator at the start of the line to be
recognized, it is required to put a colon before a range.  This will add
"start" and print: >
	var result = start
	+ print
Like this: >
	var result = start + print

This will assign "start" and print a line: >
	var result = start
	:+ print

Note that the colon is not required for the |+cmd| argument: >
	edit +6 fname

It is also possible to split a function header over multiple lines, in between
arguments: >
	def MyFunc(
		text: string,
		separator = '-'
		): string

Since a continuation line cannot be easily recognized the parsing of commands
has been made stricter.  E.g., because of the error in the first line, the
second line is seen as a separate command: >
	popup_create(some invalid expression, {
	   exit_cb: Func})
Now "exit_cb: Func})" is actually a valid command: save any changes to the
file "_cb: Func})" and exit.  To avoid this kind of mistake in Vim9 script
there must be white space between most command names and the argument.

However, the argument of a command that is a command won't be recognized.  For
example, after "windo echo expr" a line break inside "expr" will not be seen.


Notes:
- "enddef" cannot be used at the start of a continuation line, it ends the
  current function.
- No line break is allowed in the LHS of an assignment.  Specifically when
  unpacking a list |:let-unpack|. This is OK: >
	[var1, var2] =
		Func()
<  This does not work: >
	[var1,
	    var2] =
		Func()
- No line break is allowed in between arguments of an `:echo`, `:execute` and
  similar commands.  This is OK: >
	echo [1,
		2] [3,
			4]
<  This does not work: >
	echo [1, 2]
		[3, 4]

No curly braces expansion ~

|curly-braces-names| cannot be used.


Dictionary literals ~

Traditionally Vim has supported dictionary literals with a {} syntax: >
	let dict = {'key': value}

Later it became clear that using a simple text key is very common, thus
literal dictionaries were introduced in a backwards compatible way: >
	let dict = #{key: value}

However, this #{} syntax is unlike any existing language.  As it turns out
that using a literal key is much more common than using an expression, and
considering that JavaScript uses this syntax, using the {} form for dictionary
literals is considered a much more useful syntax.  In Vim9 script the {} form
uses literal keys: >
	var dict = {key: value}

This works for alphanumeric characters, underscore and dash.  If you want to
use another character, use a single or double quoted string: >
	var dict = {'key with space': value}
	var dict = {"key\twith\ttabs": value}
	var dict = {'': value}  		# empty key

In case the key needs to be an expression, square brackets can be used, just
like in JavaScript: >
	var dict = {["key" .. nr]: value}

The key type can be string, number, bool or float.  Other types result in an
error.  A number can be given with and without the []: >
	var dict = {123: 'without', [456]: 'with'}
	echo dict
	{'456': 'with', '123': 'without'}


No :xit, :t, :append, :change or :insert ~

These commands are too easily confused with local variable names.
Instead of `:x` or `:xit` you can use `:exit`.
Instead of `:t` you can use `:copy`.


Comparators ~

The 'ignorecase' option is not used for comparators that use strings.


For loop ~

Legacy Vim script has some tricks to make a for loop over a list handle
deleting items at the current or previous item.  In Vim9 script it just uses
the index, if items are deleted then items in the list will be skipped.
Example legacy script: >
	let l = [1, 2, 3, 4]
	for i in l
	   echo i
	   call remove(l, index(l, i))
	endfor
Would echo:
	1
	2
	3
	4
In compiled Vim9 script you get:
	1
	3
Generally, you should not change the list that is iterated over.  Make a copy
first if needed.


White space ~

Vim9 script enforces proper use of white space.  This is no longer allowed: >
	var name=234	# Error!
	var name= 234	# Error!
	var name =234	# Error!
There must be white space before and after the "=": >
	var name = 234	# OK
White space must also be put before the # that starts a comment after a
command: >
	var name = 234# Error!
	var name = 234 # OK

White space is required around most operators.

White space is required in a sublist (list slice) around the ":", except at
the start and end: >
	otherlist = mylist[v : count]  	# v:count has a different meaning
	otherlist = mylist[:]		# make a copy of the List
	otherlist = mylist[v :]
	otherlist = mylist[: v]

White space is not allowed:
- Between a function name and the "(": >
	Func (arg)	   # Error!
	Func
	     \ (arg)	   # Error!
	Func
	      (arg)	   # Error!
	Func(arg)	   # OK
	Func(
	      arg)	   # OK
	Func(
	      arg	   # OK
	      )


Conditions and expressions ~

Conditions and expressions are mostly working like they do in other languages.
Some values are different from legacy Vim script:
	value		legacy Vim script	Vim9 script ~
	0		falsy			falsy
	1		truthy			truthy
	99		truthy			Error!
	"0"		falsy			Error!
	"99"		truthy			Error!
	"text"		falsy			Error!

For the "??" operator and when using "!" then there is no error, every value
is either falsy or truthy.  This is mostly like JavaScript, except that an
empty list and dict is falsy:

	type		truthy when ~
	bool		true, v:true or 1
	number		non-zero
	float		non-zero
	string		non-empty
	blob		non-empty
	list		non-empty (different from JavaScript)
	dictionary	non-empty (different from JavaScript)
	func		when there is a function name
	special		true or v:true
	job		when not NULL
	channel		when not NULL
	class		when not NULL
	object		when not NULL (TODO: when isTrue() returns true)

The boolean operators "||" and "&&" expect the values to be boolean, zero or
one: >
	1 || false   == true
	0 || 1       == true
	0 || false   == false
	1 && true    == true
	0 && 1       == false
	8 || 0	     Error!
	'yes' && 0   Error!
	[] || 99     Error!

When using "!" for inverting, there is no error for using any type and the
result is a boolean.  "!!" can be used to turn any value into boolean: >
	!'yes'			== false
	!![]			== false
	!![1, 2, 3]		== true

When using "`.."` for string concatenation arguments of simple types are
always converted to string: >
	'hello ' .. 123  == 'hello 123'
	'hello ' .. v:true  == 'hello true'

Simple types are string, float, special and bool.  For other types |string()|
can be used.
							*false* *true* *null*
In Vim9 script one can use "true" for v:true, "false" for v:false and "null"
for v:null.  When converting a boolean to a string "false" and "true" are
used, not "v:false" and "v:true" like in legacy script.  "v:none" is not
changed, it is only used in JSON and has no equivalent in other languages.

Indexing a string with [idx] or [idx : idx] uses character indexes instead of
byte indexes. Example: >
	echo 'bár'[1]
In legacy script this results in the character 0xc3 (an illegal byte), in Vim9
script this results in the string 'á'.
A negative index is counting from the end, "[-1]" is the last character.
To exclude the last character use |slice()|.
If the index is out of range then an empty string results.

In legacy script "++var" and "--var" would be silently accepted and have no
effect.  This is an error in Vim9 script.

Numbers starting with zero are not considered to be octal, only numbers
starting with "0o" are octal: "0o744". |scriptversion-4|


What to watch out for ~
							*vim9-gotchas*
Vim9 was designed to be closer to often used programming languages, but at the
same time tries to support the legacy Vim commands.  Some compromises had to
be made.  Here is a summary of what might be unexpected.

Ex command ranges need to be prefixed with a colon. >
	->		  legacy Vim: shifts the previous line to the right
	->func()	  Vim9: method call in a continuation line
	:->		  Vim9: shifts the previous line to the right

	%s/a/b		  legacy Vim: substitute on all lines
	x = alongname
	     % another	  Vim9: modulo operator in a continuation line
	:%s/a/b		  Vim9: substitute on all lines
	't		  legacy Vim: jump to mark t
	'text'->func()	  Vim9: method call
	:'t		  Vim9: jump to mark t

Some Ex commands can be confused with assignments in Vim9 script: >
	g:name = value    # assignment
	g:pattern:cmd	  # invalid command - ERROR
	:g:pattern:cmd	  # :global command

Functions defined with `:def` compile the whole function.  Legacy functions
can bail out, and the following lines are not parsed: >
	func Maybe()
	  if !has('feature')
	    return
	  endif
	  use-feature
	endfunc
Vim9 functions are compiled as a whole: >
	def Maybe()
	  if !has('feature')
	    return
	  endif
	  use-feature  # May give a compilation error
	enddef
For a workaround, split it in two functions: >
	func Maybe()
	  if has('feature')
	    call MaybeInner()
	  endif
	endfunc
	if has('feature')
	  def MaybeInner()
	    use-feature
	  enddef
	endif
Or put the unsupported code inside an `if` with a constant expression that
evaluates to false: >
	def Maybe()
	  if has('feature')
	    use-feature
	  endif
	enddef
<							*vim9-user-command*
Another side effect of compiling a function is that the presence of a user
command is checked at compile time.  If the user command is defined later an
error will result.  This works: >
	command -nargs=1 MyCommand echom <q-args>
	def Works()
	  MyCommand 123
	enddef
This will give an error for "MyCommand" not being defined: >
	def Works()
	  command -nargs=1 MyCommand echom <q-args>
	  MyCommand 123
	enddef
A workaround is to invoke the command indirectly with `:execute`: >
	def Works()
	  command -nargs=1 MyCommand echom <q-args>
	  execute 'MyCommand 123'
	enddef

Note that for unrecognized commands there is no check for "|" and a following
command.  This will give an error for missing `endif`: >
	def Maybe()
	  if has('feature') | use-feature | endif
	enddef

Other differences ~

Patterns are used like 'magic' is set, unless explicitly overruled.
The 'edcompatible' option value is not used.
The 'gdefault' option value is not used.


==============================================================================

3. New style functions					*fast-functions*

THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE

							*:def*
:def[!] {name}([arguments])[: {return-type}]
			Define a new function by the name {name}.  The body of
			the function follows in the next lines, until the
			matching `:enddef`.

			When {return-type} is omitted or is "void" the
			function is not expected to return anything.
			
			{arguments} is a sequence of zero or more argument
			declarations.  There are three forms:
				{name}: {type}
				{name} = {value}
				{name}: {type} = {value}
			The first form is a mandatory argument, the caller
			must always provide them.
			The second and third form are optional arguments.
			When the caller omits an argument the {value} is used.

			The function will be compiled into instructions when
			called, or when `:disassemble` or `:defcompile` is
			used.  Syntax and type errors will be produced at that
			time.

			It is possible to nest `:def` inside another `:def` or
			`:function` up to about 50 levels deep.

			[!] is used as with `:function`.  Note that
			script-local functions cannot be deleted or redefined
			later in Vim9 script.  They can only be removed by
			reloading the same script.

							*:enddef*
:enddef			End of a function defined with `:def`. It should be on
			a line by its own.


If the script the function is defined in is Vim9 script, then script-local
variables can be accessed without the "s:" prefix.  They must be defined
before the function is compiled.  If the script the function is defined in is
legacy script, then script-local variables must be accessed with the "s:"
prefix and they do not need to exist (they can be deleted any time).

						*:defc* *:defcompile*
:defc[ompile]		Compile functions defined in the current script that
			were not compiled yet.
			This will report errors found during the compilation.

						*:disa* *:disassemble*
:disa[ssemble] {func}	Show the instructions generated for {func}.
			This is for debugging and testing.
			Note that for command line completion of {func} you
			can prepend "s:" to find script-local functions.

:disa[ssemble]! {func}	Like `:disassemble` but with the instructions used for
			profiling.

Limitations ~

Local variables will not be visible to string evaluation.  For example: >
	def MapList(): list<string>
	  var list = ['aa', 'bb', 'cc', 'dd']
	  return range(1, 2)->map('list[v:val]')
	enddef

The map argument is a string expression, which is evaluated without the
function scope.  Instead, use a lambda: >
	def MapList(): list<string>
	  var list = ['aa', 'bb', 'cc', 'dd']
	  return range(1, 2)->map(( _, v) => list[v])
	enddef

The same is true for commands that are not compiled, such as `:global`.
For these the backtick expansion can be used.  Example: >
	def Replace()
	  var newText = 'blah'
	  g/pattern/s/^/`=newText`/
	enddef

==============================================================================

4. Types					*vim9-types*

THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE

The following builtin types are supported:
	bool
	number
	float
	string
	blob
	list<{type}>
	dict<{type}>
	job
	channel
	func
	func: {type}
	func({type}, ...)
	func({type}, ...): {type}

Not supported yet:
	tuple<a: {type}, b: {type}, ...>

These types can be used in declarations, but no value will have this type:
	{type}|{type}  {not implemented yet}
	void
	any

There is no array type, use list<{type}> instead.  For a list constant an
efficient implementation is used that avoids allocating lot of small pieces of
memory.

A partial and function can be declared in more or less specific ways:
func				any kind of function reference, no type
				checking for arguments or return value
func: {type}			any number and type of arguments with specific
				return type
func({type})			function with argument type, does not return
				a value
func({type}): {type}		function with argument type and return type
func(?{type})			function with type of optional argument, does
				not return a value
func(...{type})			function with type of variable number of
				arguments, does not return a value
func({type}, ?{type}, ...{type}): {type}
				function with:
				- type of mandatory argument
				- type of optional argument
				- type of variable number of arguments
				- return type

If the return type is "void" the function does not return a value.

The reference can also be a |Partial|, in which case it stores extra arguments
and/or a dictionary, which are not visible to the caller.  Since they are
called in the same way the declaration is the same.

Custom types can be defined with `:type`: >
	:type MyList list<string>
Custom types must start with a capital letter, to avoid name clashes with
builtin types added later, similarly to user functions.
{not implemented yet}

And classes and interfaces can be used as types: >
	:class MyClass
	:var mine: MyClass

	:interface MyInterface
	:var mine: MyInterface

	:class MyTemplate<Targ>
	:var mine: MyTemplate<number>
	:var mine: MyTemplate<string>

	:class MyInterface<Targ>
	:var mine: MyInterface<number>
	:var mine: MyInterface<string>
{not implemented yet}


Variable types and type casting	~
							*variable-types*
Variables declared in Vim9 script or in a `:def` function have a type, either
specified explicitly or inferred from the initialization.

Global, buffer, window and tab page variables do not have a specific type, the
value can be changed at any time, possibly changing the type.  Therefore, in
compiled code the "any" type is assumed.

This can be a problem when the "any" type is undesired and the actual type is
expected to always be the same.  For example, when declaring a list: >
	var l: list<number> = [1, g:two]
At compile time Vim doesn't know the type of "g:two" and the expression type
becomes list<any>.  An instruction is generated to check the list type before
doing the assignment, which is a bit inefficient.
							*type-casting*
To avoid this, use a type cast: >
	var l: list<number> = [1, <number>g:two]
The compiled code will then only check that "g:two" is a number and give an
error if it isn't.  This is called type casting.

The syntax of a type cast is:  "<" {type} ">".  There cannot be white space
after the "<" or before the ">" (to avoid them being confused with
smaller-than and bigger-than operators).

The semantics is that, if needed, a runtime type check is performed.  The
value is not actually changed.  If you need to change the type, e.g. to change
it to a string, use the |string()| function.  Or use |str2nr()| to convert a
string to a number.


Type inference ~
							*type-inference*
In general: Whenever the type is clear it can be omitted.  For example, when
declaring a variable and giving it a value: >
	var name = 0		# infers number type
	var name = 'hello'	# infers string type

The type of a list and dictionary comes from the common type of the values.
If the values all have the same type, that type is used for the list or
dictionary.  If there is a mix of types, the "any" type is used. >
	[1, 2, 3]	list<number>
	['a', 'b', 'c']	list<string>
	[1, 'x', 3]	list<any>


Stricter type checking ~
							*type-checking*
In legacy Vim script, where a number was expected, a string would be
automatically converted to a number.  This was convenient for an actual number
such as "123", but leads to unexpected problems (but no error message) if the
string doesn't start with a number.  Quite often this leads to hard-to-find
bugs.

In Vim9 script this has been made stricter.  In most places it works just as
before, if the value used matches the expected type.  There will sometimes be
an error, thus breaking backwards compatibility.  For example:
- Using a number other than 0 or 1 where a boolean is expected.  *E1023*
- Using a string value when setting a number options.
- Using a number where a string is expected.   *E1024*

One consequence is that the item type of a list or dict given to map() must
not change.  This will give an error in compiled code: >
	map([1, 2, 3], (i, v) => 'item ' .. i)
	E1012: Type mismatch; expected list<number> but got list<string>
Instead use |mapnew()|.

==============================================================================

5. Namespace, Import and Export
					*vim9script* *vim9-export* *vim9-import*

THIS IS STILL UNDER DEVELOPMENT - ANYTHING CAN BREAK - ANYTHING CAN CHANGE

A Vim9 script can be written to be imported.  This means that everything in
the script is local, unless exported.  Those exported items, and only those
items, can then be imported in another script.

You can cheat by using the global namespace explicitly.  We will assume here
that you don't do that.


Namespace ~
							*vim9-namespace*
To recognize a file that can be imported the `vim9script` statement must
appear as the first statement in the file.  It tells Vim to interpret the
script in its own namespace, instead of the global namespace.  If a file
starts with: >
	vim9script
	var myvar = 'yes'
Then "myvar" will only exist in this file.  While without `vim9script` it would
be available as `g:myvar` from any other script and function.

The variables at the file level are very much like the script-local "s:"
variables in legacy Vim script, but the "s:" is omitted.  And they cannot be
deleted.

In Vim9 script the global "g:" namespace can still be used as before.  And the
"w:", "b:" and "t:" namespaces.  These have in common that variables are not
declared and they can be deleted.

A side effect of `:vim9script` is that the 'cpoptions' option is set to the
Vim default value, like with: >
	:set cpo&vim
One of the effects is that |line-continuation| is always enabled.
The original value of 'cpoptions' is restored at the end of the script.


Export ~
							*:export* *:exp*
Exporting an item can be written as: >
	export const EXPORTED_CONST = 1234
	export var someValue = ...
	export final someValue = ...
	export const someValue = ...
	export def MyFunc() ...
	export class MyClass ...

As this suggests, only constants, variables, `:def` functions and classes can
be exported. {classes are not implemented yet}

							*E1042*
`:export` can only be used in Vim9 script, at the script level.


Import ~
						*:import* *:imp* *E1094*
The exported items can be imported individually in another Vim9 script: >
	import EXPORTED_CONST from "thatscript.vim"
	import MyClass from "myclass.vim"

To import multiple items at the same time: >
	import {someValue, MyClass} from "thatscript.vim"

In case the name is ambiguous, another name can be specified: >
	import MyClass as ThatClass from "myclass.vim"
	import {someValue, MyClass as ThatClass} from "myclass.vim"

To import all exported items under a specific identifier: >
	import * as That from 'thatscript.vim'

{not implemented yet: using "This as That"}

Then you can use "That.EXPORTED_CONST", "That.someValue", etc.  You are free
to choose the name "That", but it is highly recommended to use the name of the
script file to avoid confusion.

`:import` can also be used in legacy Vim script.  The imported items still
become script-local, even when the "s:" prefix is not given.

The script name after `import` can be:
- A relative path, starting "." or "..".  This finds a file relative to the
  location of the script file itself.  This is useful to split up a large
  plugin into several files.
- An absolute path, starting with "/" on Unix or "D:/" on MS-Windows.  This
  will rarely be used.
- A path not being relative or absolute.  This will be found in the
  "import" subdirectories of 'runtimepath' entries.  The name will usually be
  longer and unique, to avoid loading the wrong file.

Once a vim9 script file has been imported, the result is cached and used the
next time the same script is imported.  It will not be read again.
							*:import-cycle*
The `import` commands are executed when encountered.  If that script (directly
or indirectly) imports the current script, then items defined after the
`import` won't be processed yet.  Therefore cyclic imports can exist, but may
result in undefined items.


Import in an autoload script ~

For optimal startup speed, loading scripts should be postponed until they are
actually needed.  A recommended mechanism:

1. In the plugin define user commands, functions and/or mappings that refer to
   an autoload script. >
	command -nargs=1 SearchForStuff searchfor#Stuff(<f-args>)

<   This goes in .../plugin/anyname.vim.  "anyname.vim" can be freely chosen.

2. In the autoload script do the actual work.  You can import items from
   other files to split up functionality in appropriate pieces. >
	vim9script
	import FilterFunc from "../import/someother.vim"
	def searchfor#Stuff(arg: string)
	  var filtered = FilterFunc(arg)
	  ...
<   This goes in .../autoload/searchfor.vim.  "searchfor" in the file name
   must be exactly the same as the prefix for the function name, that is how
   Vim finds the file.

3. Other functionality, possibly shared between plugins, contains the exported
   items and any private items. >
	vim9script
	var localVar = 'local'
	export def FilterFunc(arg: string): string
	   ...
<   This goes in .../import/someother.vim.

When compiling a `:def` function and a function in an autoload script is
encountered, the script is not loaded until the `:def` function is called.


Import in legacy Vim script ~

If an `import` statement is used in legacy Vim script, the script-local "s:"
namespace will be used for the imported item, even when "s:" is not specified.


==============================================================================

6. Future work: classes					*vim9-classes*

Above "class" was mentioned a few times, but it has not been implemented yet.
Most of Vim9 script can be created without this functionality, and since
implementing classes is going to be a lot of work, it is left for the future.
For now we'll just make sure classes can be added later.

Thoughts:
- `class` / `endclass`, everything in one file
- Class names are always CamelCase
- Single constructor
- Single inheritance with `class ThisClass extends BaseClass`
- `abstract class`
- `interface` (Abstract class without any implementation)
- `class SomeClass implements SomeInterface`
- Generics for class: `class <Tkey, Tentry>`
- Generics for function: `def <Tkey> GetLast(key: Tkey)`

Again, much of this is from TypeScript.

Some things that look like good additions:
- Use a class as an interface (like Dart)
- Extend a class with methods, using an import (like Dart)

An important class that will be provided is "Promise".  Since Vim is single
threaded, connecting asynchronous operations is a natural way of allowing
plugins to do their work without blocking the user.  It's a uniform way to
invoke callbacks and handle timeouts and errors.

==============================================================================

9. Rationale						*vim9-rationale*

The :def command ~

Plugin writers have asked for much faster Vim script.  Investigations have
shown that keeping the existing semantics of function calls make this close to
impossible, because of the overhead involved with calling a function, setting
up the local function scope and executing lines.  There are many details that
need to be handled, such as error messages and exceptions.  The need to create
a dictionary for a: and l: scopes, the a:000 list and several others add too
much overhead that cannot be avoided.

Therefore the `:def` method to define a new-style function had to be added,
which allows for a function with different semantics.  Most things still work
as before, but some parts do not.  A new way to define a function was
considered the best way to separate the legacy style code from Vim9 style code.

Using "def" to define a function comes from Python. Other languages use
"function" which clashes with legacy Vim script.


Type checking ~

When compiling lines of Vim commands into instructions as much as possible
should be done at compile time.  Postponing it to runtime makes the execution
slower and means mistakes are found only later.  For example, when
encountering the "+" character and compiling this into a generic add
instruction, at runtime the instruction would have to inspect the type of the
arguments and decide what kind of addition to do.  And when the type is
dictionary throw an error.  If the types are known to be numbers then an "add
number" instruction can be used, which is faster.  The error can be given at
compile time, no error handling is needed at runtime, since adding two numbers
cannot fail.

The syntax for types, using <type> for compound types, is similar to Java.  It
is easy to understand and widely used.  The type names are what were used in
Vim before, with some additions such as "void" and "bool".


Removing clutter and weirdness ~

Once decided that `:def` functions have different syntax than legacy functions,
we are free to add improvements to make the code more familiar for users who
know popular programming languages.  In other words: remove weird things that
only Vim does.

We can also remove clutter, mainly things that were done to make Vim script
backwards compatible with the good old Vi commands.

Examples:
- Drop `:call` for calling a function and `:eval` for manipulating data.
- Drop using a leading backslash for line continuation, automatically figure
  out where an expression ends.

However, this does require that some things need to change:
- Comments start with # instead of ", to avoid confusing them with strings.
  This is good anyway, it is known from several popular languages.
- Ex command ranges need to be prefixed with a colon, to avoid confusion with
  expressions (single quote can be a string or a mark, "/" can be divide or a
  search command, etc.).

Goal is to limit the differences.  A good criteria is that when the old syntax
is accidentally used you are very likely to get an error message.


Syntax and semantics from popular languages ~

Script writers have complained that the Vim script syntax is unexpectedly
different from what they are used to.  To reduce this complaint popular
languages are used as an example.  At the same time, we do not want to abandon
the well-known parts of legacy Vim script.

For many things TypeScript is followed.  It's a recent language that is
gaining popularity and has similarities with Vim script.  It also has a
mix of static typing (a variable always has a known value type) and dynamic
typing (a variable can have different types, this changes at runtime).  Since
legacy Vim script is dynamically typed and a lot of existing functionality
(esp. builtin functions) depends on that, while static typing allows for much
faster execution, we need to have this mix in Vim9 script.

There is no intention to completely match TypeScript syntax and semantics.  We
just want to take those parts that we can use for Vim and we expect Vim users
will be happy with.  TypeScript is a complex language with its own history,
advantages and disadvantages.  To get an idea of the disadvantages read the
book: "JavaScript: The Good Parts".  Or find the article "TypeScript: the good
parts" and read the "Things to avoid" section.

People familiar with other languages (Java, Python, etc.) will also find
things in TypeScript that they do not like or do not understand.  We'll try to
avoid those things.

Specific items from TypeScript we avoid:
- Overloading "+", using it both for addition and string concatenation.  This
  goes against legacy Vim script and often leads to mistakes.  For that reason
  we will keep using ".." for string concatenation.  Lua also uses ".." this
  way.  And it allows for conversion to string for more values.
- TypeScript can use an expression like "99 || 'yes'" in a condition, but
  cannot assign the value to a boolean.  That is inconsistent and can be
  annoying.  Vim recognizes an expression with && or || and allows using the
  result as a bool.  TODO: to be reconsidered
- TypeScript considers an empty string as Falsy, but an empty list or dict as
  Truthy.  That is inconsistent.  In Vim an empty list and dict are also
  Falsy.
- TypeScript has various "Readonly" types, which have limited usefulness,
  since a type cast can remove the immutable nature.  Vim locks the value,
  which is more flexible, but is only checked at runtime.


Declarations ~

Legacy Vim script uses `:let` for every assignment, while in Vim9 declarations
are used.  That is different, thus it's good to use a different command:
`:var`.  This is used in many languages.  The semantics might be slightly
different, but it's easily recognized as a declaration.

Using `:const`  for constants is common, but the semantics varies.  Some
languages only make the variable immutable, others also make the value
immutable.  Since "final" is well known from Java for only making the variable
immutable we decided to use that.  And then `:const` can be used for making
both immutable.  This was also used in legacy Vim script and the meaning is
almost the same.

What we end up with is very similar to Dart: >
	:var name	# mutable variable and value
	:final name	# immutable variable, mutable value
	:const name	# immutable variable and value

Since legacy and Vim9 script will be mixed and global variables will be
shared, optional type checking is desirable.  Also, type inference will avoid
the need for specifying the type in many cases.  The TypeScript syntax fits
best for adding types to declarations: >
	var name: string	  # string type is specified
	...
	name = 'John'
	const greeting = 'hello'  # string type is inferred

This is how we put types in a declaration: >
	var mylist: list<string>
	final mylist: list<string> = ['foo']
	def Func(arg1: number, arg2: string): bool

Two alternatives were considered:
1. Put the type before the name, like Dart: >
	var list<string> mylist
	final list<string> mylist = ['foo']
	def Func(number arg1, string arg2) bool
2. Put the type after the variable name, but do not use a colon, like Go: >
	var mylist list<string>
	final mylist list<string> = ['foo']
	def Func(arg1 number, arg2 string) bool

The first is more familiar for anyone used to C or Java.  The second one
doesn't really have an advantage over the first, so let's discard the second.

Since we use type inference the type can be left out when it can be inferred
from the value.  This means that after `var` we don't know if a type or a name
follows.  That makes parsing harder, not only for Vim but also for humans.
Also, it will not be allowed to use a variable name that could be a type name,
using `var string string` is too confusing.

The chosen syntax, using a colon to separate the name from the type, adds
punctuation, but it actually makes it easier to recognize the parts of a
declaration.


Expressions ~

Expression evaluation was already close to what other languages are doing.
Some details are unexpected and can be improved.  For example a boolean
condition would accept a string, convert it to a number and check if the
number is non-zero.  This is unexpected and often leads to mistakes, since
text not starting with a number would be converted to zero, which is
considered false.  Thus using a string for a condition would often not give an
error and be considered false.  That is confusing.

In Vim9 type checking is stricter to avoid mistakes.  Where a condition is
used, e.g. with the `:if` command and the `||` operator, only boolean-like
values are accepted:
	true:  `true`, `v:true`, `1`, `0 < 9`
	false: `false`, `v:false`, `0`, `0 > 9`
Note that the number zero is false and the number one is true.  This is more
permissive than most other languages.  It was done because many builtin
functions return these values.

If you have any type of value and want to use it as a boolean, use the `!!`
operator:
	true: !`!'text'`, `!![99]`, `!!{'x': 1}`, `!!99`
	false: `!!''`, `!![]`, `!!{}`

From a language like JavaScript we have this handy construct: >
	GetName() || 'unknown'
However, this conflicts with only allowing a boolean for a condition.
Therefore the "??" operator was added: >
	GetName() ?? 'unknown'
Here you can explicitly express your intention to use the value as-is and not
result in a boolean. This is called the |falsy-operator|.


Import and Export ~

A problem of legacy Vim script is that by default all functions and variables
are global.  It is possible to make them script-local, but then they are not
available in other scripts.  This defies the concept of a package that only
exports selected items and keeps the rest local.

In Vim9 script a mechanism very similar to the JavaScript import and export
mechanism is supported.  It is a variant to the existing `:source` command
that works like one would expect:
- Instead of making everything global by default, everything is script-local,
  unless exported.
- When importing a script the symbols that are imported are explicitly listed,
  avoiding name conflicts and failures if functionality is added later.
- The mechanism allows for writing a big, long script with a very clear API:
  the exported function(s) and class(es).
- By using relative paths loading can be much faster for an import inside of a
  package, no need to search many directories.
- Once an import has been used, it can be cached and loading it again can be
  avoided.
- The Vim-specific use of "s:" to make things script-local can be dropped.

When sourcing a Vim9 script from a legacy script, only the items defined
globally can be used, not the exported items.  Alternatives considered:
- All the exported items become available as script-local items.  This makes
  it uncontrollable what items get defined and likely soon leads to trouble.
- Use the exported items and make them global.  Disadvantage is that it's then
  not possible to avoid name clashes in the global namespace.
- Completely disallow sourcing a Vim9 script, require using `:import`.  That
  makes it difficult to use scripts for testing, or sourcing them from the
  command line to try them out.
Note that you can also use `:import` in legacy Vim script, see above.


Compiling functions early ~

Functions are compiled when called or when `:defcompile` is used.  Why not
compile them early, so that syntax and type errors are reported early?

The functions can't be compiled right away when encountered, because there may
be forward references to functions defined later.  Consider defining functions
A, B and C, where A calls B, B calls C, and C calls A again.  It's impossible
to reorder the functions to avoid forward references.

An alternative would be to first scan through the file to locate items and
figure out their type, so that forward references are found, and only then
execute the script and compile the functions.  This means the script has to be
parsed twice, which is slower, and some conditions at the script level, such
as checking if a feature is supported, are hard to use.  An attempt was made
to see if it works, but it turned out to be impossible to make work nicely.

It would be possible to compile all the functions at the end of the script.
The drawback is that if a function never gets called, the overhead of
compiling it counts anyway.  Since startup speed is very important, in most
cases it's better to do it later and accept that syntax and type errors are
only reported then.  In case these errors should be found early, e.g. when
testing, the `:defcompile` command will help out.


Why not use an embedded language? ~

Vim supports interfaces to Perl, Python, Lua, Tcl and a few others.  But
these interfaces have never become widely used, for various reasons.  When
Vim9 was designed a decision was made to make these interfaces lower priority
and concentrate on Vim script.

Still, plugin writers may find other languages more familiar, want to use
existing libraries or see a performance benefit.  We encourage plugin authors
to write code in any language and run it as an external tool, using jobs and
channels.  We can try to make this easier somehow.

Using an external tool also has disadvantages.  An alternative is to convert
the tool into Vim script.  For that to be possible without too much
translation, and keeping the code fast at the same time, the constructs of the
tool need to be supported.  Since most languages support classes the lack of
support for classes in Vim is then a problem.


Classes ~

Vim supports a kind-of object oriented programming by adding methods to a
dictionary.  With some care this can be made to work, but it does not look
like real classes.  On top of that, it's quite slow, because of the use of
dictionaries.

The support of classes in Vim9 script is a "minimal common functionality" of
class support in most languages.  It works much like Java, which is the most
popular programming language.



 vim:tw=78:ts=8:noet:ft=help:norl: