runtime/doc/vim9.txt

*vim9.txt*	For Vim version 9.0.  Last change: 2022 Dec 08


		  VIM REFERENCE MANUAL	  by Bram Moolenaar


Vim9 script commands and expressions.			*Vim9* *vim9*

Most expression help is in |eval.txt|.  This file is about the new syntax and
features in Vim9 script.



1.  What is Vim9 script?		|Vim9-script|
2.  Differences				|vim9-differences|
3.  New style functions			|fast-functions|
4.  Types				|vim9-types|
5.  Namespace, Import and Export	|vim9script|
6.  Classes and interfaces		|vim9-classes|

9.  Rationale				|vim9-rationale|

==============================================================================

1. What is Vim9 script?					*Vim9-script*

Vim script has been growing over time, while preserving backwards
compatibility.  That means bad choices from the past often can't be changed
and compatibility with Vi restricts possible solutions.  Execution is quite
slow, each line is parsed every time it is executed.

The main goal of Vim9 script is to drastically improve performance.  This is
accomplished by compiling commands into instructions that can be efficiently
executed.  An increase in execution speed of 10 to 100 times can be expected.

A secondary goal is to avoid Vim-specific constructs and get closer to
commonly used programming languages, such as JavaScript, TypeScript and Java.

The performance improvements can only be achieved by not being 100% backwards
compatible.  For example, making function arguments available in the "a:"
dictionary adds quite a lot of overhead.  In a Vim9 function this dictionary
is not available.  Other differences are more subtle, such as how errors are
handled.

The Vim9 script syntax and semantics are used in:
- a function defined with the `:def` command
- a script file where the first command is `vim9script`
- an autocommand defined in the context of the above
- a command prefixed with the `vim9cmd` command modifier

When using `:function` in a Vim9 script file the legacy syntax is used, with
the highest |scriptversion|.  However, this can be confusing and is therefore
discouraged.

Vim9 script and legacy Vim script can be mixed.  There is no requirement to
rewrite old scripts, they keep working as before.  You may want to use a few
`:def` functions for code that needs to be fast.

:vim9[cmd] {cmd}				*:vim9* *:vim9cmd* *E1164*
		Evaluate and execute {cmd} using Vim9 script syntax and
		semantics.  Useful when typing a command and in a legacy
		script or function.

:leg[acy] {cmd}					*:leg* *:legacy* *E1189* *E1234*
		Evaluate and execute {cmd} using legacy script syntax and
		semantics.  Only useful in a Vim9 script or a :def function.
		Note that {cmd} cannot use local variables, since it is parsed
		with legacy expression syntax.

==============================================================================

2. Differences from legacy Vim script			*vim9-differences*

Overview ~
							*E1146*
Brief summary of the differences you will most often encounter when using Vim9
script and `:def` functions; details are below:
- Comments start with #, not ": >
	echo "hello"   # comment
- Using a backslash for line continuation is hardly ever needed: >
	echo "hello "
	     .. yourName
	     .. ", how are you?"
- White space is required in many places to improve readability.
- Assign values without `:let` *E1126* , declare variables with `:var`: >
	var count = 0
	count += 3
- Constants can be declared with `:final` and `:const`: >
	final matches = []		  # add to the list later
	const names = ['Betty', 'Peter']  # cannot be changed
- `:final` cannot be used as an abbreviation of `:finally`.
- Variables and functions are script-local by default.
- Functions are declared with argument types and return type: >
	def CallMe(count: number, message: string): bool
- Call functions without `:call`: >
	writefile(['done'], 'file.txt')
- You cannot use old Ex commands:
	`:Print`
	`:append`
	`:change`
	`:d`  directly followed by 'd' or 'p'.
	`:insert`
	`:k`
	`:mode`
	`:open`
	`:s`  with only flags
	`:t`
	`:xit`
- Some commands, especially those used for flow control, cannot be shortened.
  E.g., `:throw` cannot be written as `:th`.  *vim9-no-shorten*
- You cannot use curly-braces names.
- A range before a command must be prefixed with a colon: >
	:%s/this/that
- Executing a register with "@r" does not work, you can prepend a colon or use
  `:exe`: >
  	:exe @a
- Unless mentioned specifically, the highest |scriptversion| is used.
- When defining an expression mapping, the expression will be evaluated in the
  context of the script where it was defined.


Comments starting with # ~

In legacy Vim script comments start with double quote.  In Vim9 script
comments start with #. >
	# declarations
	var count = 0  # number of occurrences

The reason is that a double quote can also be the start of a string. In many
places, especially halfway through an expression with a line break, it's hard
to tell what the meaning is, since both a string and a comment can be followed
by arbitrary text.  To avoid confusion only # comments are recognized.  This
is the same as in shell scripts and Python programs.

In Vi # is a command to list text with numbers.  In Vim9 script you can use
`:number` for that. >
	:101 number

To improve readability there must be a space between a command and the #
that starts a comment: >
	var name = value # comment
	var name = value# error!
<							*E1170*
Do not start a comment with #{, it looks like the legacy dictionary literal
and produces an error where this might be confusing.  #{{ or #{{{ are OK,
these can be used to start a fold.

When starting to read a script file Vim doesn't know it is |Vim9| script until
the `vim9script` command is found.  Until that point you would need to use
legacy comments: >
	" legacy comment
	vim9script
	# Vim9 comment

That looks ugly, better put `vim9script` in the very first line: >
	vim9script
	# Vim9 comment

In legacy Vim script # is also used for the alternate file name.  In Vim9
script you need to use %% instead.  Instead of ## use %%% (stands for all
arguments).


Vim9 functions ~
							*E1099*
A function defined with `:def` is compiled.  Execution is many times faster,
often 10 to 100 times.

Many errors are already found when compiling, before the function is executed.
The syntax is strict, to enforce code that is easy to read and understand.

Compilation is done when any of these is encountered:
- the first time the function is called
- when the `:defcompile` command is encountered in the script after the
  function was defined
- `:disassemble` is used for the function.
- a function that is compiled calls the function or uses it as a function
  reference (so that the argument and return types can be checked)
						*E1091* *E1191*
If compilation fails it is not tried again on the next call, instead this
error is given: "E1091: Function is not compiled: {name}".
Compilation will fail when encountering a user command that has not been
created yet.  In this case you can call `execute()` to invoke it at runtime. >
	def MyFunc()
	  execute('DefinedLater')
	enddef

`:def` has no options like `:function` does: "range", "abort", "dict" or
"closure".  A `:def` function always aborts on an error (unless `:silent!` was
used for the command or the error was caught a `:try` block), does not get a
range passed, cannot be a "dict" function, and can always be a closure.
						*vim9-no-dict-function*
Later classes will be added, which replaces the "dict function" mechanism.
For now you will need to pass the dictionary explicitly: >
	def DictFunc(self: dict<any>, arg: string)
	   echo self[arg]
	enddef
	var ad = {item: 'value', func: DictFunc}
	ad.func(ad, 'item')

You can call a legacy dict function though: >
	func Legacy() dict
	  echo self.value
	endfunc
	def CallLegacy()
	  var d = {func: Legacy, value: 'text'}
	  d.func()
	enddef
<						*E1096* *E1174* *E1175*
The argument types and return type need to be specified.  The "any" type can
be used, type checking will then be done at runtime, like with legacy
functions.
							*E1106*
Arguments are accessed by name, without "a:", just like any other language.
There is no "a:" dictionary or "a:000" list.
			*vim9-variable-arguments* *E1055* *E1160* *E1180*
Variable arguments are defined as the last argument, with a name and have a
list type, similar to TypeScript.  For example, a list of numbers: >
	def MyFunc(...itemlist: list<number>)
	   for item in itemlist
	     ...

When a function argument is optional (it has a default value) passing `v:none`
as the argument results in using the default value.  This is useful when you
want to specify a value for an argument that comes after an argument that
should use its default value.  Example: >
	def MyFunc(one = 'one', last = 'last')
	  ...
	enddef
	MyFunc(v:none, 'LAST')  # first argument uses default value 'one'
<
					*vim9-ignored-argument* *E1181*
The argument "_" (an underscore) can be used to ignore the argument.  This is
most useful in callbacks where you don't need it, but do need to give an
argument to match the call.  E.g. when using map() two arguments are passed,
the key and the value, to ignore the key: >
	map(numberList, (_, v) => v * 2)
There is no error for using the "_" argument multiple times.  No type needs to
be given.


Functions and variables are script-local by default ~
							*vim9-scopes*
When using `:function` or `:def` to specify a new function at the script level
in a Vim9 script, the function is local to the script.  Like prefixing "s:" in
legacy script.  To define a global function or variable the "g:" prefix must
be used.  For functions in a script that is to be imported and in an autoload
script "export" needs to be used for those to be used elsewhere. >
	def ThisFunction()          # script-local
	def g:ThatFunction()        # global
	export def Function()       # for import and import autoload
<						*E1058* *E1075*
When using `:function` or `:def` to specify a nested function inside a `:def`
function and no namespace was given, this nested function is local to the code
block it is defined in.  It cannot be used in `function()` with a string
argument, pass the function reference itself: >
	def Outer()
	  def Inner()
	    echo 'inner'
	  enddef
	  var Fok = function(Inner)     # OK
	  var Fbad = function('Inner')  # does not work

Detail: this is because "Inner" will actually become a function reference to a
function with a generated name.

It is not possible to define a script-local function in a function.  You can
define a local function and assign it to a script-local Funcref (it must have
been declared at the script level).  It is possible to define a global
function by using the "g:" prefix.

When referring to a function and no "s:" or "g:" prefix is used, Vim will
search for the function:
- in the function scope, in block scopes
- in the script scope

Imported functions are found with the prefix from the `:import` command.

Since a script-local function reference can be used without "s:" the name must
start with an upper case letter even when using the "s:" prefix.  In legacy
script "s:funcref" could be used, because it could not be referred to with
"funcref".  In Vim9 script it can, therefore "s:Funcref" must be used to avoid
that the name interferes with builtin functions.
						*vim9-s-namespace* *E1268*
The use of the "s:" prefix is not supported at the Vim9 script level.  All
functions and variables without a prefix are script-local.

In :def functions the use of "s:" depends on the script: Script-local
variables and functions in a legacy script do use "s:", while in a Vim9 script
they do not use "s:".  This matches what you see in the rest of the file.

In legacy functions the use of "s:" for script items is required, as before.
No matter if the script is Vim9 or legacy.

In all cases the function must be defined before used.  That is when it is
called, when `:defcompile` causes it to be compiled, or when code that calls
it is being compiled (to figure out the return type).

The result is that functions and variables without a namespace can usually be
found in the script, either defined there or imported.  Global functions and
variables could be defined anywhere (good luck finding out where!  You can
often see where it was last set using |:verbose|).
							*E1102*
Global functions can still be defined and deleted at nearly any time.  In
Vim9 script script-local functions are defined once when the script is sourced
and cannot be deleted or replaced by itself (it can be by reloading the
script).

When compiling a function and a function call is encountered for a function
that is not (yet) defined, the |FuncUndefined| autocommand is not triggered.
You can use an autoload function if needed, or call a legacy function and have
|FuncUndefined| triggered there.


Reloading a Vim9 script clears functions and variables by default ~
						*vim9-reload* *E1149* *E1150*
When loading a legacy Vim script a second time nothing is removed, the
commands will replace existing variables and functions, create new ones, and
leave removed things hanging around.

When loading a Vim9 script a second time all existing script-local functions
and variables are deleted, thus you start with a clean slate.  This is useful
if you are developing a plugin and want to try a new version.  If you renamed
something you don't have to worry about the old name still hanging around.

If you do want to keep items, use: >
	vim9script noclear

You want to use this in scripts that use a `finish` command to bail out at
some point when loaded again.  E.g. when a buffer local option is set to a
function, the function does not need to be defined more than once: >
	vim9script noclear
	setlocal completefunc=SomeFunc
	if exists('*SomeFunc')
	  finish
	endif
	def SomeFunc()
	....


Variable declarations with :var, :final and :const ~
				*vim9-declaration* *:var* *E1079*
				*E1017* *E1020* *E1054* *E1087* *E1108* *E1124*
Local variables need to be declared with `:var`.  Local constants need to be
declared with `:final` or `:const`.  We refer to both as "variables" in this
section.

Variables can be local to a script, function or code block: >
	vim9script
	var script_var = 123
	def SomeFunc()
	  var func_var = script_var
	  if cond
	    var block_var = func_var
	  ...

The variables are only visible in the block where they are defined and nested
blocks.  Once the block ends the variable is no longer accessible: >
	if cond
	   var inner = 5
	else
	   var inner = 0
	endif
	echo inner  # Error!

The declaration must be done earlier: >
	var inner: number
	if cond
	   inner = 5
	else
	   inner = 0
	endif
	echo inner

Although this is shorter and faster for simple values: >
	var inner = 0
	if cond
	   inner = 5
	endif
	echo inner
<							*E1025* *E1128*
To intentionally hide a variable from code that follows, a block can be
used: >
	{
	   var temp = 'temp'
	   ...
	}
	echo temp  # Error!

This is especially useful in a user command: >
	command -range Rename {
		 var save = @a
		 @a = 'some expression'
		 echo 'do something with ' .. @a
		 @a = save
	    }

And with autocommands: >
   au BufWritePre *.go {
		 var save = winsaveview()
		 silent! exe ':%! some formatting command'
		 winrestview(save)
	   }

Although using a :def function probably works better.

				*E1022* *E1103* *E1130* *E1131* *E1133*
				*E1134*
Declaring a variable with a type but without an initializer will initialize to
false (for bool), empty (for string, list, dict, etc.) or zero (for number,
any, etc.).  This matters especially when using the "any" type, the value will
default to the number zero.  For example, when declaring a list, items can be
added: >
	var myList: list<number>
	myList->add(7)

Initializing a variable to a null value, e.g. `null_list`, differs from not
initializing the variable.  This throws an error: >
	var myList = null_list
	myList->add(7)  # E1130: Cannot add to null list

<						*E1016* *E1052* *E1066*
In Vim9 script `:let` cannot be used.  An existing variable is assigned to
without any command.  The same for global, window, tab, buffer and Vim
variables, because they are not really declared.  Those can also be deleted
with `:unlet`.
							*E1065*
You cannot use `:va` to declare a variable, it must be written with the full
name `:var`.  Just to make sure it is easy to read.
							*E1178*
`:lockvar` does not work on local variables.  Use `:const` and `:final`
instead.

The `exists()` and `exists_compiled()` functions do not work on local variables
or arguments.
				*E1006* *E1041* *E1167* *E1168* *E1213*
Variables, functions and function arguments cannot shadow previously defined
or imported variables and functions in the same script file.
Variables may shadow Ex commands, rename the variable if needed.

Global variables must be prefixed with "g:", also at the script level. >
	vim9script
	var script_local = 'text'
	g:global = 'value'
	var Funcref = g:ThatFunction

Global functions must be prefixed with "g:": >
	vim9script
	def g:GlobalFunc(): string
	  return 'text'
	enddef
	echo g:GlobalFunc()
The "g:" prefix is not needed for auto-load functions.

					*vim9-function-defined-later*
Although global functions can be called without the "g:" prefix, they must
exist when compiled.  By adding the "g:" prefix the function can be defined
later.  Example: >
	def CallPluginFunc()
	  if exists('g:loaded_plugin')
	    g:PluginFunc()
	  endif
	enddef

If you do it like this, you get an error at compile time that "PluginFunc"
does not exist, even when "g:loaded_plugin" does not exist: >
	def CallPluginFunc()
	  if exists('g:loaded_plugin')
	    PluginFunc()   # Error - function not found
	  endif
	enddef

You can use exists_compiled() to avoid the error, but then the function would
not be called, even when "g:loaded_plugin" is defined later: >
	def CallPluginFunc()
	  if exists_compiled('g:loaded_plugin')
	    PluginFunc()   # Function may never be called
	  endif
	enddef

Since `&opt = value` is now assigning a value to option "opt", ":&" cannot be
used to repeat a `:substitute` command.
							*vim9-unpack-ignore*
For an unpack assignment the underscore can be used to ignore a list item,
similar to how a function argument can be ignored: >
	[a, _, c] = theList
To ignore any remaining items: >
	[a, b; _] = longList
<							*E1163* *E1080*
Declaring more than one variable at a time, using the unpack notation, is
possible.  Each variable can have a type or infer it from the value: >
	var [v1: number, v2] = GetValues()
Use this only when there is a list with values, declaring one variable per
line is much easier to read and change later.


Constants ~
						*vim9-const* *vim9-final*
How constants work varies between languages.  Some consider a variable that
can't be assigned another value a constant.  JavaScript is an example.  Others
also make the value immutable, thus when a constant uses a list, the list
cannot be changed.  In Vim9 we can use both.
							*E1021* *E1307*
`:const` is used for making both the variable and the value a constant.  Use
this for composite structures that you want to make sure will not be modified.
Example: >
	const myList = [1, 2]
	myList = [3, 4]		# Error!
	myList[0] = 9		# Error!
	myList->add(3)		# Error!
<							*:final* *E1125*
`:final` is used for making only the variable a constant, the value can be
changed.  This is well known from Java.  Example: >
	final myList = [1, 2]
	myList = [3, 4]		# Error!
	myList[0] = 9		# OK
	myList->add(3)		# OK

It is common to write constants as ALL_CAPS, but you don't have to.

The constant only applies to the value itself, not what it refers to. >
	final females = ["Mary"]
	const NAMES = [["John", "Peter"], females]
	NAMES[0] = ["Jack"]     # Error!
	NAMES[0][0] = "Jack"    # Error!
	NAMES[1] = ["Emma"]     # Error!
	NAMES[1][0] = "Emma"    # OK, now females[0] == "Emma"


Omitting :call and :eval ~
							*E1190*
Functions can be called without `:call`: >
	writefile(lines, 'file')
Using `:call` is still possible, but this is discouraged.

A method call without `eval` is possible, so long as the start is an
identifier or can't be an Ex command.  For a function either "(" or "->" must
be following, without a line break.  Examples: >
	myList->add(123)
	g:myList->add(123)
	[1, 2, 3]->Process()
	{a: 1, b: 2}->Process()
	"foobar"->Process()
	("foobar")->Process()
	'foobar'->Process()
	('foobar')->Process()

In the rare case there is ambiguity between a function name and an Ex command,
prepend ":" to make clear you want to use the Ex command.  For example, there
is both the `:substitute` command and the `substitute()` function.  When the
line starts with `substitute(` this will use the function. Prepend a colon to
use the command instead: >
	:substitute(pattern (replacement (

If the expression starts with "!" this is interpreted as a shell command, not
negation of a condition.  Thus this is a shell command: >
	!shellCommand->something
Put the expression in parentheses to use the "!" for negation: >
	(!expression)->Method()

Note that while variables need to be defined before they can be used,
functions can be called before being defined.  This is required to allow
for cyclic dependencies between functions.  It is slightly less efficient,
since the function has to be looked up by name.  And a typo in the function
name will only be found when the function is called.


Omitting function() ~

A user defined function can be used as a function reference in an expression
without `function()`. The argument types and return type will then be checked.
The function must already have been defined. >

	var Funcref = MyFunction

When using `function()` the resulting type is "func", a function with any
number of arguments and any return type (including void).  The function can be
defined later if the argument is in quotes.


Lambda using => instead of -> ~
							*vim9-lambda*
In legacy script there can be confusion between using "->" for a method call
and for a lambda.  Also, when a "{" is found the parser needs to figure out if
it is the start of a lambda or a dictionary, which is now more complicated
because of the use of argument types.

To avoid these problems Vim9 script uses a different syntax for a lambda,
which is similar to JavaScript: >
	var Lambda = (arg) => expression
	var Lambda = (arg): type => expression
<							*E1157*
No line break is allowed in the arguments of a lambda up to and including the
"=>" (so that Vim can tell the difference between an expression in parentheses
and lambda arguments).  This is OK: >
	filter(list, (k, v) =>
			v > 0)
This does not work: >
	filter(list, (k, v)
			=> v > 0)
This also does not work: >
	filter(list, (k,
			v) => v > 0)
But you can use a backslash to concatenate the lines before parsing: >
	filter(list, (k,
		\	v)
		\	=> v > 0)
<					*vim9-lambda-arguments* *E1172*
In legacy script a lambda could be called with any number of extra arguments,
there was no way to warn for not using them.  In Vim9 script the number of
arguments must match.  If you do want to accept any arguments, or any further
arguments, use "..._", which makes the function accept
|vim9-variable-arguments|.  Example: >
	var Callback = (..._) => 'anything'
	echo Callback(1, 2, 3)  # displays "anything"

<						*inline-function* *E1171*
Additionally, a lambda can contain statements in {}: >
	var Lambda = (arg) => {
		g:was_called = 'yes'
		return expression
	    }
This can be useful for a timer, for example: >
	var count = 0
 	var timer = timer_start(500, (_) => {
		 count += 1
		 echom 'Handler called ' .. count
	     }, {repeat: 3})

The ending "}" must be at the start of a line.  It can be followed by other
characters, e.g.: >
	var d = mapnew(dict, (k, v): string => {
	     return 'value'
	   })
No command can follow the "{", only a comment can be used there.

						*command-block* *E1026*
The block can also be used for defining a user command.  Inside the block Vim9
syntax will be used.

If the statements include a dictionary, its closing bracket must not be
written at the start of a line.  Otherwise, it would be parsed as the end of
the block.  This does not work: >
	command NewCommand {
	     g:mydict = {
	       'key': 'value',
	       }  # ERROR: will be recognized as the end of the block
	   }
Put the '}' after the last item to avoid this: >
	command NewCommand {
	     g:mydict = {
	       'key': 'value' }
	   }

Rationale: The "}" cannot be after a command because it would require parsing
the commands to find it.  For consistency with that no command can follow the
"{".  Unfortunately this means using "() => {  command  }" does not work, line
breaks are always required.

							*vim9-curly*
To avoid the "{" of a dictionary literal to be recognized as a statement block
wrap it in parentheses: >
	var Lambda = (arg) => ({key: 42})

Also when confused with the start of a command block: >
	({
	    key: value
	 })->method()


Automatic line continuation ~
					*vim9-line-continuation* *E1097*
In many cases it is obvious that an expression continues on the next line.  In
those cases there is no need to prefix the line with a backslash (see
|line-continuation|).  For example, when a list spans multiple lines: >
	var mylist = [
		'one',
		'two',
		]
And when a dict spans multiple lines: >
	var mydict = {
		one: 1,
		two: 2,
		}
With a function call: >
	var result = Func(
			arg1,
			arg2
			)

For binary operators in expressions not in [], {} or () a line break is
possible just before or after the operator.  For example: >
	var text = lead
		   .. middle
		   .. end
	var total = start +
		    end -
		    correction
	var result = positive
			? PosFunc(arg)
			: NegFunc(arg)

For a method call using "->" and a member using a dot, a line break is allowed
before it: >
	var result = GetBuilder()
			->BuilderSetWidth(333)
			->BuilderSetHeight(777)
			->BuilderBuild()
	var result = MyDict
			.member

For commands that have an argument that is a list of commands, the | character
at the start of the line indicates line continuation: >
	autocmd BufNewFile *.match if condition
		|   echo 'match'
		| endif

Note that this means that in heredoc the first line cannot start with a bar: >
	var lines =<< trim END
	   | this doesn't work
	END
Either use an empty line at the start or do not use heredoc.  Or temporarily
add the "C" flag to 'cpoptions': >
	set cpo+=C
	var lines =<< trim END
	   | this works
	END
	set cpo-=C
If the heredoc is inside a function 'cpoptions' must be set before :def and
restored after the :enddef.

In places where line continuation with a backslash is still needed, such as
splitting up a long Ex command, comments can start with '#\ ': >
	syn region Text
	      \ start='foo'
	      #\ comment
	      \ end='bar'
Like with legacy script '"\ ' is used.  This is also needed when line
continuation is used without a backslash and a line starts with a bar: >
	au CursorHold * echom 'BEFORE bar'
	      #\ some comment
	      | echom 'AFTER bar'
<
							*E1050*
To make it possible for the operator at the start of the line to be
recognized, it is required to put a colon before a range.  This example will
add "start" and "print": >
	var result = start
	+ print
Like this: >
	var result = start + print

This will assign "start" and print a line: >
	var result = start
	:+ print

After the range an Ex command must follow.  Without the colon you can call a
function without `:call`, but after a range you do need it: >
	MyFunc()
	:% call MyFunc()

Note that the colon is not required for the |+cmd| argument: >
	edit +6 fname

It is also possible to split a function header over multiple lines, in between
arguments: >
	def MyFunc(
		text: string,
		separator = '-'
		): string

Since a continuation line cannot be easily recognized the parsing of commands
has been made stricter.  E.g., because of the error in the first line, the
second line is seen as a separate command: >
	popup_create(some invalid expression, {
	   exit_cb: Func})
Now "exit_cb: Func})" is actually a valid command: save any changes to the
file "_cb: Func})" and exit.  To avoid this kind of mistake in Vim9 script
there must be white space between most command names and the argument.
*E1144*

However, the argument of a command that is a command won't be recognized.  For
example, after "windo echo expr" a line break inside "expr" will not be seen.


Notes:
- "enddef" cannot be used at the start of a continuation line, it ends the
  current function.
- No line break is allowed in the LHS of an assignment.  Specifically when
  unpacking a list |:let-unpack|. This is OK: >
	[var1, var2] =
		Func()
<  This does not work: >
	[var1,
	    var2] =
		Func()
- No line break is allowed in between arguments of an `:echo`, `:execute` and
  similar commands.  This is OK: >
	echo [1,
		2] [3,
			4]
<  This does not work: >
	echo [1, 2]
		[3, 4]
- In some cases it is difficult for Vim to parse a command, especially when
  commands are used as an argument to another command, such as `:windo`.  In
  those cases the line continuation with a backslash has to be used.


White space ~
			*E1004* *E1068* *E1069* *E1074* *E1127* *E1202*
Vim9 script enforces proper use of white space.  This is no longer allowed: >
	var name=234	# Error!
	var name= 234	# Error!
	var name =234	# Error!
There must be white space before and after the "=": >
	var name = 234	# OK
White space must also be put before the # that starts a comment after a
command: >
	var name = 234# Error!
	var name = 234 # OK

White space is required around most operators.

White space is required in a sublist (list slice) around the ":", except at
the start and end: >
	otherlist = mylist[v : count]  	# v:count has a different meaning
	otherlist = mylist[:]		# make a copy of the List
	otherlist = mylist[v :]
	otherlist = mylist[: v]

White space is not allowed:
- Between a function name and the "(": >
	Func (arg)	   # Error!
	Func
	     \ (arg)	   # Error!
	Func
	      (arg)	   # Error!
	Func(arg)	   # OK
	Func(
	      arg)	   # OK
	Func(
	      arg	   # OK
	      )
<							*E1205*
White space is not allowed in a `:set` command between the option name and a
following "&", "!", "<", "=", "+=", "-=" or "^=".


No curly braces expansion ~

|curly-braces-names| cannot be used.


Command modifiers are not ignored ~
								*E1176*
Using a command modifier for a command that does not use it gives an error.
								*E1082*
Also, using a command modifier without a following command is now an error.


Dictionary literals ~
						*vim9-literal-dict* *E1014*
Traditionally Vim has supported dictionary literals with a {} syntax: >
	let dict = {'key': value}

Later it became clear that using a simple text key is very common, thus
literal dictionaries were introduced in a backwards compatible way: >
	let dict = #{key: value}

However, this #{} syntax is unlike any existing language.  As it turns out
that using a literal key is much more common than using an expression, and
considering that JavaScript uses this syntax, using the {} form for dictionary
literals is considered a much more useful syntax.  In Vim9 script the {} form
uses literal keys: >
	var dict = {key: value}

This works for alphanumeric characters, underscore and dash.  If you want to
use another character, use a single or double quoted string: >
	var dict = {'key with space': value}
	var dict = {"key\twith\ttabs": value}
	var dict = {'': value}  		# empty key
<							*E1139*
In case the key needs to be an expression, square brackets can be used, just
like in JavaScript: >
	var dict = {["key" .. nr]: value}

The key type can be string, number, bool or float.  Other types result in an
error.  Without using [] the value is used as a string, keeping leading zeros.
An expression given with [] is evaluated and then converted to a string.
Leading zeros will then be dropped: >
	var dict = {000123: 'without', [000456]: 'with'}
	echo dict
	{'456': 'with', '000123': 'without'}
A float only works inside [] because the dot is not accepted otherwise: >
	var dict = {[00.013]: 'float'}
	echo dict
	{'0.013': 'float'}


No :xit, :t, :k, :append, :change or :insert ~
							*E1100*
These commands are too easily confused with local variable names.
Instead of `:x` or `:xit` you can use `:exit`.
Instead of `:t` you can use `:copy`.
Instead of `:k` you can use `:mark`.


Comparators ~

The 'ignorecase' option is not used for comparators that use strings.
Thus "=~" works like "=~#".

"is" and "isnot" (|expr-is| and |expr-isnot|) when used on strings now return
false.  In legacy script they just compare the strings, in |Vim9| script they
check identity, and strings are copied when used, thus two strings are never
the same (this might change some day if strings are not copied but reference
counted).


Abort after error ~

In legacy script, when an error is encountered, Vim continues to execute
following lines.  This can lead to a long sequence of errors and need to type
CTRL-C to stop it.  In Vim9 script execution of commands stops at the first
error.  Example: >
	vim9script
	var x = does-not-exist
	echo 'not executed'


For loop ~
							*E1254*
The loop variable must not be declared yet: >
	var i = 1
	for i in [1, 2, 3]   # Error!

It is possible to use a global variable though: >
	g:i = 1
	for g:i in [1, 2, 3]
	  echo g:i
	endfor

Legacy Vim script has some tricks to make a for loop over a list handle
deleting items at the current or previous item.  In Vim9 script it just uses
the index, if items are deleted then items in the list will be skipped.
Example legacy script: >
	let l = [1, 2, 3, 4]
	for i in l
	   echo i
	   call remove(l, index(l, i))
	endfor
Would echo:
	1
	2
	3
	4
In compiled Vim9 script you get:
	1
	3
Generally, you should not change the list that is iterated over.  Make a copy
first if needed.
When looping over a list of lists, the nested lists can be changed.  The loop
variable is "final", it cannot be changed but what its value can be changed.
							*E1306*
The depth of loops, :for and :while loops added together, cannot exceed 10.


Conditions and expressions ~
						*vim9-boolean*
Conditions and expressions are mostly working like they do in other languages.
Some values are different from legacy Vim script:
	value		legacy Vim script	Vim9 script ~
	0		falsy			falsy
	1		truthy			truthy
	99		truthy			Error!
	"0"		falsy			Error!
	"99"		truthy			Error!
	"text"		falsy			Error!

For the "??" operator and when using "!" then there is no error, every value
is either falsy or truthy.  This is mostly like JavaScript, except that an
empty list and dict is falsy:

	type		truthy when ~
	bool		true, v:true or 1
	number		non-zero
	float		non-zero
	string		non-empty
	blob		non-empty
	list		non-empty (different from JavaScript)
	dictionary	non-empty (different from JavaScript)
	func		when there is a function name
	special		true or v:true
	job		when not NULL
	channel		when not NULL
	class		when not NULL
	object		when not NULL (TODO: when isTrue() returns true)

The boolean operators "||" and "&&" expect the values to be boolean, zero or
one: >
	1 || false   == true
	0 || 1       == true
	0 || false   == false
	1 && true    == true
	0 && 1       == false
	8 || 0	     Error!
	'yes' && 0   Error!
	[] || 99     Error!

When using "!" for inverting, there is no error for using any type and the
result is a boolean.  "!!" can be used to turn any value into boolean: >
	!'yes'			== false
	!![]			== false
	!![1, 2, 3]		== true

When using "`.."` for string concatenation arguments of simple types are
always converted to string: >
	'hello ' .. 123  == 'hello 123'
	'hello ' .. v:true  == 'hello true'

Simple types are Number, Float, Special and Bool.  For other types |string()|
should be used.
			*false* *true* *null* *null_blob* *null_channel*
			*null_dict* *null_function* *null_job* *null_list*
			*null_partial* *null_string* *E1034*
In Vim9 script one can use the following predefined values: >
	true
	false
	null
	null_blob
	null_channel
	null_dict
	null_function
	null_job
	null_list
	null_partial
	null_string
`true` is the same as `v:true`, `false` the same as `v:false`, `null` the same
as `v:null`.

While `null` has the type "special", the other "null_" values have the type
indicated by their name.  Quite often a null value is handled the same as an
empty value, but not always.  The values can be useful to clear a script-local
variable, since they cannot be deleted with `:unlet`.  E.g.: >
	var theJob = job_start(...)
	# let the job do its work
	theJob = null_job

The values can also be useful as the default value for an argument: >
	def MyFunc(b: blob = null_blob)
	   if b == null_blob
	      # b argument was not given

It is possible to compare `null`  with any value, this will not give a type
error.  However, comparing `null` with a number, float or bool will always
result in `false`.  This is different from legacy script, where comparing
`null` with zero or `false` would return `true`.

When converting a boolean to a string `false` and `true` are used, not
`v:false` and `v:true` like in legacy script.  `v:none` has no `none`
replacement, it has no equivalent in other languages.

Indexing a string with [idx] or taking a slice with [idx : idx] uses character
indexes instead of byte indexes.  Composing characters are included.
Example: >
	echo 'bár'[1]
In legacy script this results in the character 0xc3 (an illegal byte), in Vim9
script this results in the string 'á'.
A negative index is counting from the end, "[-1]" is the last character.
To exclude the last character use |slice()|.
To count composing characters separately use |strcharpart()|.
If the index is out of range then an empty string results.

In legacy script "++var" and "--var" would be silently accepted and have no
effect.  This is an error in Vim9 script.

Numbers starting with zero are not considered to be octal, only numbers
starting with "0o" are octal: "0o744". |scriptversion-4|


What to watch out for ~
							*vim9-gotchas*
Vim9 was designed to be closer to often used programming languages, but at the
same time tries to support the legacy Vim commands.  Some compromises had to
be made.  Here is a summary of what might be unexpected.

Ex command ranges need to be prefixed with a colon. >
	->		  legacy Vim: shifts the previous line to the right
	->func()	  Vim9: method call in a continuation line
	:->		  Vim9: shifts the previous line to the right

	%s/a/b		  legacy Vim: substitute on all lines
	x = alongname
	     % another	  Vim9: modulo operator in a continuation line
	:%s/a/b		  Vim9: substitute on all lines
	't		  legacy Vim: jump to mark t
	'text'->func()	  Vim9: method call
	:'t		  Vim9: jump to mark t

Some Ex commands can be confused with assignments in Vim9 script: >
	g:name = value    # assignment
	:g:pattern:cmd	  # :global command

To avoid confusion between a `:global` or `:substitute` command and an
expression or assignment, a few separators cannot be used when these commands
are abbreviated to a single character: ':', '-' and '.'. >
	g:pattern:cmd	  # invalid command - ERROR
	s:pattern:repl	  # invalid command - ERROR
	g-pattern-cmd	  # invalid command - ERROR
	s-pattern-repl	  # invalid command - ERROR
	g.pattern.cmd	  # invalid command - ERROR
	s.pattern.repl	  # invalid command - ERROR

Also, there cannot be a space between the command and the separator: >
	g /pattern/cmd	  # invalid command - ERROR
	s /pattern/repl	  # invalid command - ERROR

Functions defined with `:def` compile the whole function.  Legacy functions
can bail out, and the following lines are not parsed: >
	func Maybe()
	  if !has('feature')
	    return
	  endif
	  use-feature
	endfunc
Vim9 functions are compiled as a whole: >
	def Maybe()
	  if !has('feature')
	    return
	  endif
	  use-feature  # May give a compilation error
	enddef
For a workaround, split it in two functions: >
	func Maybe()
	  if has('feature')
	    call MaybeInner()
	  endif
	endfunc
	if has('feature')
	  def MaybeInner()
	    use-feature
	  enddef
	endif
Or put the unsupported code inside an `if` with a constant expression that
evaluates to false: >
	def Maybe()
	  if has('feature')
	    use-feature
	  endif
	enddef
The `exists_compiled()` function can also be used for this.
							*vim9-user-command*
Another side effect of compiling a function is that the presence of a user
command is checked at compile time.  If the user command is defined later an
error will result.  This works: >
	command -nargs=1 MyCommand echom <q-args>
	def Works()
	  MyCommand 123
	enddef
This will give an error for "MyCommand" not being defined: >
	def Works()
	  command -nargs=1 MyCommand echom <q-args>
	  MyCommand 123
	enddef
A workaround is to invoke the command indirectly with `:execute`: >
	def Works()
	  command -nargs=1 MyCommand echom <q-args>
	  execute 'MyCommand 123'
	enddef

Note that for unrecognized commands there is no check for "|" and a following
command.  This will give an error for missing `endif`: >
	def Maybe()
	  if has('feature') | use-feature | endif
	enddef

Other differences ~

Patterns are used like 'magic' is set, unless explicitly overruled.
The 'edcompatible' option value is not used.
The 'gdefault' option value is not used.

You may also find this wiki useful.  It was written by an early adopter of
Vim9 script: https://github.com/lacygoill/wiki/blob/master/vim/vim9.md

							*:++* *:--*
The ++ and -- commands have been added.  They are very similar to adding or
subtracting one: >
		++var
		var += 1
		--var
		var -= 1

Using ++var or --var in an expression is not supported yet.

==============================================================================

3. New style functions					*fast-functions*

							*:def* *E1028*
:def[!] {name}([arguments])[: {return-type}]
			Define a new function by the name {name}.  The body of
			the function follows in the next lines, until the
			matching `:enddef`. *E1073*
							*E1011*
			The {name} must be less than 100 bytes long.
					*E1003* *E1027* *E1056* *E1059*
			The type of value used with `:return` must match
			{return-type}.  When {return-type} is omitted or is
			"void" the function is not expected to return
			anything.
							*E1077* *E1123*
			{arguments} is a sequence of zero or more argument
			declarations.  There are three forms:
				{name}: {type}
				{name} = {value}
				{name}: {type} = {value}
			The first form is a mandatory argument, the caller
			must always provide them.
			The second and third form are optional arguments.
			When the caller omits an argument the {value} is used.

			The function will be compiled into instructions when
			called, or when `:disassemble` or `:defcompile` is
			used.  Syntax and type errors will be produced at that
			time.

			It is possible to nest `:def` inside another `:def` or
			`:function` up to about 50 levels deep.
							*E1117*
			[!] is used as with `:function`.  Note that
			script-local functions cannot be deleted or redefined
			later in Vim9 script.  They can only be removed by
			reloading the same script.

					*:enddef* *E1057* *E1152* *E1173*
:enddef			End of a function defined with `:def`. It should be on
			a line by its own.

You may also find this wiki useful.  It was written by an early adopter of
Vim9 script: https://github.com/lacygoill/wiki/blob/master/vim/vim9.md

If the script the function is defined in is Vim9 script, then script-local
variables can be accessed without the "s:" prefix.  They must be defined
before the function is compiled.  If the script the function is defined in is
legacy script, then script-local variables must be accessed with the "s:"
prefix if they do not exist at the time of compiling.
							*E1269*
Script-local variables in a |Vim9| script must be declared at the script
level.  They cannot be created in a function, also not in a legacy function.

						*:defc* *:defcompile*
:defc[ompile]		Compile functions defined in the current script that
			were not compiled yet.
			This will report any errors found during compilation.

:defc[ompile] {func}
:defc[ompile] debug {func}
:defc[ompile] profile {func}
			Compile function {func}, if needed.  Use "debug" and
			"profile" to specify the compilation mode.
			This will report any errors found during compilation.

						*:disa* *:disassemble*
:disa[ssemble] {func}	Show the instructions generated for {func}.
			This is for debugging and testing. *E1061*
			Note that for command line completion of {func} you
			can prepend "s:" to find script-local functions.

:disa[ssemble] profile {func}
			Like `:disassemble` but with the instructions used for
			profiling.

:disa[ssemble] debug {func}
			Like `:disassemble` but with the instructions used for
			debugging.

Limitations ~

Local variables will not be visible to string evaluation.  For example: >
	def MapList(): list<string>
	  var list = ['aa', 'bb', 'cc', 'dd']
	  return range(1, 2)->map('list[v:val]')
	enddef

The map argument is a string expression, which is evaluated without the
function scope.  Instead, use a lambda: >
	def MapList(): list<string>
	  var list = ['aa', 'bb', 'cc', 'dd']
	  return range(1, 2)->map((_, v) => list[v])
	enddef

For commands that are not compiled, such as `:edit`, backtick expansion can be
used and it can use the local scope.  Example: >
	def Replace()
	  var fname = 'blah.txt'
	  edit `=fname`
	enddef

Closures defined in a loop will share the same context.  For example: >
	var flist: list<func>
	for i in range(5)
	  var inloop = i
	  flist[i] = () => inloop
	endfor
	echo range(5)->map((i, _) => flist[i]())
	# Result: [4, 4, 4, 4, 4]
<							*E1271*
A closure must be compiled in the context that it is defined in, so that
variables in that context can be found.  This mostly happens correctly, except
when a function is marked for debugging with `:breakadd` after it was compiled.
Make sure to define the breakpoint before compiling the outer function.

The "inloop" variable will exist only once, all closures put in the list refer
to the same instance, which in the end will have the value 4.  This is
efficient, also when looping many times.  If you do want a separate context
for each closure, call a function to define it: >
	def GetClosure(i: number): func
	  var infunc = i
	  return () => infunc
	enddef

	var flist: list<func>
	for i in range(5)
	  flist[i] = GetClosure(i)
	endfor
	echo range(5)->map((i, _) => flist[i]())
	# Result: [0, 1, 2, 3, 4]

In some situations, especially when calling a Vim9 closure from legacy
context, the evaluation will fail.  *E1248*

Note that at the script level the loop variable will be invalid after the
loop, also when used in a closure that is called later, e.g. with a timer.
This will generate error |E1302|: >
	for n in range(4)
	    timer_start(500 * n, (_) => {
	          echowin n
	       })
	endfor

You need to use a block and define a variable there, and use that one in the
closure: >
	for n in range(4)
	{
	   var nr = n
	   timer_start(500 * n, (_) => {
	          echowin nr
	      })
	}
	endfor

Using `:echowindow` is useful in a timer, the messages go into a popup and will
not interfere with what the user is doing when it triggers.


Converting a function from legacy to Vim9 ~
					*convert_legacy_function_to_vim9*
These are the most changes that need to be made to convert a legacy function
to a Vim9 function:

- Change `func` or `function` to `def`.
- Change `endfunc` or `endfunction` to `enddef`.
- Add types to the function arguments.
- If the function returns something, add the return type.
- Change comments to start with # instead of ".

  For example, a legacy function: >
	func MyFunc(text)
	  " function body
	endfunc
<  Becomes: >
	def MyFunc(text: string): number
	  # function body
	enddef

- Remove "a:" used for arguments. E.g.: >
	return len(a:text)
<  Becomes: >
	return len(text)

- Change `let` used to declare a variable to `var`.
- Remove `let` used to assign a value to a variable.  This is for local
  variables already declared and b: w: g: and t: variables.

  For example, legacy function: >
	  let lnum = 1
	  let lnum += 3
	  let b:result = 42
<  Becomes: >
	  var lnum = 1
	  lnum += 3
	  b:result = 42

- Insert white space in expressions where needed.
- Change "." used for concatenation to "..".

  For example, legacy function: >
	  echo line(1).line(2)
<  Becomes: >
	  echo line(1) .. line(2)

- line continuation does not always require a backslash: >
  	echo ['one',
		\ 'two',
		\ 'three'
		\ ]
<  Becomes: >
	echo ['one',
		'two',
		'three'
		]


Calling a function in an expr option ~
							*expr-option-function*
The value of a few options, such as 'foldexpr', is an expression that is
evaluated to get a value.  The evaluation can have quite a bit of overhead.
One way to minimize the overhead, and also to keep the option value very
simple, is to define a compiled function and set the option to call it
without arguments.  Example: >
	vim9script
	def MyFoldFunc(): any
	   ... compute fold level for line v:lnum
	   return level
	enddef
	set foldexpr=s:MyFoldFunc()

==============================================================================

4. Types					*vim9-types*
					*E1008* *E1009* *E1010* *E1012*
					*E1013* *E1029* *E1030*
The following builtin types are supported:
	bool
	number
	float
	string
	blob
	list<{type}>
	dict<{type}>
	job
	channel
	func
	func: {type}
	func({type}, ...)
	func({type}, ...): {type}
	void

Not supported yet:
	tuple<a: {type}, b: {type}, ...>

These types can be used in declarations, but no simple value will actually
have the "void" type.  Trying to use a void (e.g. a function without a
return value) results in error *E1031*  *E1186* .

There is no array type, use list<{type}> instead.  For a list constant an
efficient implementation is used that avoids allocating lot of small pieces of
memory.
							*E1005* *E1007*
A partial and function can be declared in more or less specific ways:
func				any kind of function reference, no type
				checking for arguments or return value
func: void			any number and type of arguments, no return
				value
func: {type}			any number and type of arguments with specific
				return type

func()				function with no argument, does not return a
				value
func(): void			same
func(): {type}			function with no argument and return type

func({type})			function with argument type, does not return
				a value
func({type}): {type}		function with argument type and return type
func(?{type})			function with type of optional argument, does
				not return a value
func(...{type})			function with type of variable number of
				arguments, does not return a value
func({type}, ?{type}, ...{type}): {type}
				function with:
				- type of mandatory argument
				- type of optional argument
				- type of variable number of arguments
				- return type

If the return type is "void" the function does not return a value.

The reference can also be a |Partial|, in which case it stores extra arguments
and/or a dictionary, which are not visible to the caller.  Since they are
called in the same way the declaration is the same.

Custom types can be defined with `:type`: >
	:type MyList list<string>
Custom types must start with a capital letter, to avoid name clashes with
builtin types added later, similarly to user functions.
{not implemented yet}

And classes and interfaces can be used as types: >
	:class MyClass
	:var mine: MyClass

	:interface MyInterface
	:var mine: MyInterface

	:class MyTemplate<Targ>
	:var mine: MyTemplate<number>
	:var mine: MyTemplate<string>

	:class MyInterface<Targ>
	:var mine: MyInterface<number>
	:var mine: MyInterface<string>
{not implemented yet}


Variable types and type casting	~
							*variable-types*
Variables declared in Vim9 script or in a `:def` function have a type, either
specified explicitly or inferred from the initialization.

Global, buffer, window and tab page variables do not have a specific type, the
value can be changed at any time, possibly changing the type.  Therefore, in
compiled code the "any" type is assumed.

This can be a problem when the "any" type is undesired and the actual type is
expected to always be the same.  For example, when declaring a list: >
	var l: list<number> = [1, g:two]
At compile time Vim doesn't know the type of "g:two" and the expression type
becomes list<any>.  An instruction is generated to check the list type before
doing the assignment, which is a bit inefficient.
						*type-casting* *E1104*
To avoid this, use a type cast: >
	var l: list<number> = [1, <number>g:two]
The compiled code will then only check that "g:two" is a number and give an
error if it isn't.  This is called type casting.

The syntax of a type cast is:  "<" {type} ">".  There cannot be white space
after the "<" or before the ">" (to avoid them being confused with
smaller-than and bigger-than operators).

The semantics is that, if needed, a runtime type check is performed.  The
value is not actually changed.  If you need to change the type, e.g. to change
it to a string, use the |string()| function.  Or use |str2nr()| to convert a
string to a number.

If a type is given where it is not expected you can get *E1272* .


Type inference ~
							*type-inference*
In general: Whenever the type is clear it can be omitted.  For example, when
declaring a variable and giving it a value: >
	var name = 0		# infers number type
	var name = 'hello'	# infers string type

The type of a list and dictionary comes from the common type of the values.
If the values all have the same type, that type is used for the list or
dictionary.  If there is a mix of types, the "any" type is used. >
	[1, 2, 3]	list<number>
	['a', 'b', 'c']	list<string>
	[1, 'x', 3]	list<any>

The common type of function references, if they do not all have the same
number of arguments, uses "(...)" to indicate the number of arguments is not
specified.  For example: >
	def Foo(x: bool)
	enddef
	def Bar(x: bool, y: bool)
	enddef
	var funclist = [Foo, Bar]
	echo funclist->typename()
Results in:
	list<func(...)>

For script-local variables in Vim9 script the type is checked, also when the
variable was declared in a legacy function.

When a type has been declared this is attached to a List or Dictionary.  When
later some expression attempts to change the type an error will be given: >
	var ll: list<number> = [1, 2, 3]
	ll->extend(['x'])  # Error, 'x' is not a number

If the type is not declared then it is allowed to change: >
	[1, 2, 3]->extend(['x'])  # result: [1, 2, 3, 'x']

For a variable declaration an inferred type matters: >
	var ll = [1, 2, 3]
	ll->extend(['x'])  # Error, 'x' is not a number
That is because the declaration looks like a list of numbers, thus is
equivalent to: >
	var ll: list<number> = [1, 2, 3]
If you do want a more permissive list you need to declare the type: >
	var ll: list<any> = [1, 2, 3]
	ll->extend(['x'])  # OK


Stricter type checking ~
							*type-checking*
In legacy Vim script, where a number was expected, a string would be
automatically converted to a number.  This was convenient for an actual number
such as "123", but leads to unexpected problems (and no error message) if the
string doesn't start with a number.  Quite often this leads to hard-to-find
bugs. e.g.: >
	echo 123 == '123'
<	1 ~
With an accidental space: >
	echo 123 == ' 123'
<	0 ~
							*E1206* *E1210* *E1212*
In Vim9 script this has been made stricter.  In most places it works just as
before if the value used matches the expected type.  There will sometimes be
an error, thus breaking backwards compatibility.  For example:
- Using a number other than 0 or 1 where a boolean is expected.  *E1023*
- Using a string value when setting a number option.
- Using a number where a string is expected.   *E1024* *E1105*

One consequence is that the item type of a list or dict given to |map()| must
not change, if the type was declared.  This will give an error in Vim9
script: >
	var mylist: list<number> = [1, 2, 3]
	echo map(mylist, (i, v) => 'item ' .. i)
<	E1012: Type mismatch; expected number but got string in map() ~

Instead use |mapnew()|, it creates a new list: >
	var mylist: list<number> = [1, 2, 3]
	echo mapnew(mylist, (i, v) => 'item ' .. i)
<	['item 0', 'item 1', 'item 2'] ~

If the item type was not declared or determined to be "any" it can change to a
more specific type.  E.g. when a list of mixed types gets changed to a list of
strings: >
	var mylist = [1, 2.0, '3']
	# typename(mylist) == "list<any>"
	map(mylist, (i, v) => 'item ' .. i)
	# typename(mylist) == "list<string>", no error

There is a subtle difference between using a list constant directly and
through a variable declaration.  Because of type inference, when using a list
constant to initialize a variable, this also sets the declared type: >
	var mylist = [1, 2, 3]
	# typename(mylist) == "list<number>"
	echo map(mylist, (i, v) => 'item ' .. i)  # Error!

When using the list constant directly, the type is not declared and is allowed
to change: >
	echo map([1, 2, 3], (i, v) => 'item ' .. i)  # OK

The reasoning behind this is that when a type is declared and the list is
passed around and changed, the declaration must always hold.  So that you can
rely on the type to match the declared type.  For a constant this is not
needed.

								*E1158*
Same for |extend()|, use |extendnew()| instead, and for |flatten()|, use
|flattennew()| instead.  Since |flatten()| is intended to always change the
type, it can not be used in Vim9 script.

			 *E1211* *E1217* *E1218* *E1219* *E1220* *E1221*
			 *E1222* *E1223* *E1224* *E1225* *E1226* *E1227*
			 *E1228* *E1238* *E1250* *E1251* *E1252* *E1253*
			 *E1256* *E1297* *E1298* *E1301*
Types are checked for most builtin functions to make it easier to spot
mistakes.

==============================================================================

5. Namespace, Import and Export
					*vim9script* *vim9-export* *vim9-import*

A Vim9 script can be written to be imported.  This means that some items are
intentionally exported, made available to other scripts.  When the exporting
script is imported in another script, these exported items can then be used in
that script.  All the other items remain script-local in the exporting script
and cannot be accessed by the importing script.

This mechanism exists for writing a script that can be sourced (imported) by
other scripts, while making sure these other scripts only have access to what
you want them to.  This also avoids using the global namespace, which has a
risk of name collisions.  For example when you have two plugins with similar
functionality.

You can cheat by using the global namespace explicitly.  That should be done
only for things that really are global.


Namespace ~
							*vim9-namespace*
To recognize a file that can be imported the `vim9script` statement must
appear as the first statement in the file (see |vim9-mix| for an exception).
It tells Vim to interpret the script in its own namespace, instead of the
global namespace.  If a file starts with: >
	vim9script
	var myvar = 'yes'
Then "myvar" will only exist in this file.  While without `vim9script` it would
be available as `g:myvar` from any other script and function.
							*E1101*
The variables at the file level are very much like the script-local "s:"
variables in legacy Vim script, but the "s:" is omitted.  And they cannot be
deleted.

In Vim9 script the global "g:" namespace can still be used as before.  And the
"w:", "b:" and "t:" namespaces.  These have in common that variables are not
declared, have no specific type and they can be deleted.  *E1304*

A side effect of `:vim9script` is that the 'cpoptions' option is set to the
Vim default value, like with: >
	:set cpo&vim
One of the effects is that |line-continuation| is always enabled.
The original value of 'cpoptions' is restored at the end of the script, while
flags added or removed in the script are also added to or removed from the
original value to get the same effect.  The order of flags may change.
In the |vimrc| file sourced on startup this does not happen.

							*vim9-mix*
There is one way to use both legacy and Vim9 syntax in one script file: >
	" comments may go here
	if !has('vim9script')
	   " legacy script commands go here
	   finish
	endif
	vim9script
	# Vim9 script commands go here
This allows for writing a script that takes advantage of the Vim9 script
syntax if possible, but will also work on a Vim version without it.

This can only work in two ways:
1. The "if" statement evaluates to false, the commands up to `endif` are
   skipped and `vim9script` is then the first command actually executed.
2. The "if" statement evaluates to true, the commands up to `endif` are
   executed and `finish` bails out before reaching `vim9script`.


Export ~
							*:export* *:exp*
Exporting an item can be written as: >
	export const EXPORTED_CONST = 1234
	export var someValue = ...
	export final someValue = ...
	export const someValue = ...
	export def MyFunc() ...
	export class MyClass ...
	export interface MyClass ...
<							*E1043* *E1044*
As this suggests, only constants, variables, `:def` functions and classes can
be exported. {not implemented yet: class, interface}

							*E1042*
`:export` can only be used in Vim9 script, at the script level.


Import ~
				*:import* *:imp* *E1094* *E1047* *E1262*
				*E1048* *E1049* *E1053* *E1071* *E1088* *E1236*
The exported items can be imported in another script. The import syntax has
two forms. The simple form: >
	import {filename}
<
Where {filename} is an expression that must evaluate to a string.  In this
form the filename should end in ".vim" and the portion before ".vim" will
become the script local name of the namespace. For example: >
	import "myscript.vim"
<
This makes each exported item in "myscript.vim" available as "myscript.item".
						*:import-as* *E1257* *E1261*
In case the name is long or ambiguous, this form can be used to specify
another name: >
	import {longfilename} as {name}
<
In this form {name} becomes a specific script local name for the imported
namespace.  Therefore {name} must consist of letters, digits and '_', like
|internal-variables|.  The {longfilename} expression must evaluate to any
filename.  For example: >
	import "thatscript.vim.v2" as that
<						*E1060* *E1258* *E1259* *E1260*
Then you can use "that.item", etc.  You are free to choose the name "that".
Use something that will be recognized as referring to the imported script.
Avoid command names, command modifiers and builtin function names, because the
name will shadow them.  Better not start the name starts with a capital
letter, since it can then also shadow global user commands and functions.
Also, you cannot use the name for something else in the script, such as a
function or variable name.

In case the dot in the name is undesired, a local reference can be made for a
function: >
	var LongFunc = that.LongFuncName

This also works for constants: >
	const MAXLEN = that.MAX_LEN_OF_NAME

This does not work for variables, since the value would be copied once and
when changing the variable the copy will change, not the original variable.
You will need to use the full name, with the dot.

`:import` can not be used in a function.  Imported items are intended to exist
at the script level and only imported once.

The script name after `import` can be:
- A relative path, starting "." or "..".  This finds a file relative to the
  location of the script file itself.  This is useful to split up a large
  plugin into several files.
- An absolute path, starting with "/" on Unix or "D:/" on MS-Windows.  This
  will rarely be used.
- A path not being relative or absolute.  This will be found in the
  "import" subdirectories of 'runtimepath' entries.  The name will usually be
  longer and unique, to avoid loading the wrong file.
  Note that "after/import" is not used.

If the name does not end in ".vim" then the use of "as name" is required.

Once a vim9 script file has been imported, the result is cached and used the
next time the same script is imported.  It will not be read again.

It is not allowed to import the same script twice, also when using two
different "as" names.

When using the imported name the dot and the item name must be in the same
line, there can be no line break: >
	echo that.
		name   # Error!
	echo that
		.name  # Error!
<						*import-map*
When you've imported a function from one script into a vim9 script you can
refer to the imported function in a mapping by prefixing it with |<SID>|: >
	noremap <silent> ,a :call <SID>name.Function()<CR>

When the mapping is defined "<SID>name." will be replaced with <SNR> and the
script ID of the imported script.
An even simpler solution is using |<ScriptCmd>|: >
	noremap ,a <ScriptCmd>name.Function()<CR>

Note that this does not work for variables, only for functions.

					    *import-legacy* *legacy-import*
`:import` can also be used in legacy Vim script.  The imported namespace still
becomes script-local, even when the "s:" prefix is not given. For example: >
        import "myfile.vim"
	call s:myfile.MyFunc()

And using the "as name" form: >
	import "otherfile.vim9script" as that
	call s:that.OtherFunc()

However, the namespace cannot be resolved on its own: >
	import "that.vim"
	echo s:that
	" ERROR: E1060: Expected dot after name: s:that
<
This also affects the use of |<SID>| in the legacy mapping context.  Since
|<SID>| is only a valid prefix for a function and NOT for a namespace, you
cannot use it
to scope a function in a script local namespace. Instead of prefixing the
function with |<SID>| you should use|<ScriptCmd>|. For example: >
	noremap ,a <ScriptCmd>:call s:that.OtherFunc()<CR>
<
							*:import-cycle*
The `import` commands are executed when encountered.  If script A imports
script B, and B (directly or indirectly) imports A, this will be skipped over.
At this point items in A after "import B" will not have been processed and
defined yet.  Therefore cyclic imports can exist and not result in an error
directly, but may result in an error for items in A after "import B" not being
defined.  This does not apply to autoload imports, see the next section.


Importing an autoload script ~
					*vim9-autoload* *import-autoload*
For optimal startup speed, loading scripts should be postponed until they are
actually needed.  Using the autoload mechanism is recommended:
							*E1264*
1. In the plugin define user commands, functions and/or mappings that refer to
   items imported from an autoload script. >
	import autoload 'for/search.vim'
	command -nargs=1 SearchForStuff search.Stuff(<f-args>)

<   This goes in .../plugin/anyname.vim.  "anyname.vim" can be freely chosen.
   The "SearchForStuff" command is now available to the user.

   The "autoload" argument to `:import` means that the script is not loaded
   until one of the items is actually used.  The script will be found under
   the "autoload" directory in 'runtimepath' instead of the "import"
   directory.  Alternatively a relative or absolute name can be used, see
   below.

2. In the autoload script put the bulk of the code. >
	vim9script
	export def Stuff(arg: string)
	  ...

<   This goes in .../autoload/for/search.vim.

   Putting the "search.vim" script under the "/autoload/for/" directory has
   the effect that "for#search#" will be prefixed to every exported item.  The
   prefix is obtained from the file name, as you would to manually in a
   legacy autoload script.  Thus the exported function can be found with
   "for#search#Stuff", but you would normally use `import autoload` and not
   use the prefix (which has the side effect of loading the autoload script
   when compiling a function that encounters this name).

   You can split up the functionality and import other scripts from the
   autoload script as you like.  This way you can share code between plugins.

Searching for the autoload script in all entries in 'runtimepath' can be a bit
slow.  If the plugin knows where the script is located, quite often a relative
path can be used.  This avoids the search and should be quite a bit faster.
Another advantage is that the script name does not need to be unique.  An
absolute path is also possible.  Examples: >
	import autoload '../lib/implement.vim'
	import autoload MyScriptsDir .. '/lib/implement.vim'

For defining a mapping that uses the imported autoload script the special key
|<ScriptCmd>| is useful.  It allows for a command in a mapping to use the
script context of where the mapping was defined.

When compiling a `:def` function and a function in an autoload script is
encountered, the script is not loaded until the `:def` function is called.
This also means you get any errors only at runtime, since the argument and
return types are not known yet.  If you would use the name with '#' characters
then the autoload script IS loaded.

Be careful to not refer to an item in an autoload script that does trigger
loading it unintentionally.  For example, when setting an option that takes a
function name, make sure to use a string, not a function reference: >
	import autoload 'qftf.vim'
	&quickfixtextfunc = 'qftf.Func'  # autoload script NOT loaded
	&quickfixtextfunc = qftf.Func    # autoload script IS loaded
On the other hand, it can be useful to load the script early, at a time when
any errors should be given.

For testing the |test_override()| function can be used to have the
`import autoload` load the script right away, so that the items and types can
be checked without waiting for them to be actually used: >
	test_override('autoload', 1)
Reset it later with: >
	test_override('autoload', 0)
Or: >
	test_override('ALL', 0)


==============================================================================

6. Classes and interfaces				*vim9-classes*

In legacy script a Dictionary could be used as a kind-of object, by adding
members that are functions.  However, this is quite inefficient and requires
the writer to do the work of making sure all the objects have the right
members.  See |Dictionary-function|.

In |Vim9| script you can have classes, objects and interfaces like in most
popular object-oriented programming languages.  Since this is a lot of
functionality it is located in a separate help file: |vim9class.txt|.


==============================================================================

9. Rationale						*vim9-rationale*

The :def command ~

Plugin writers have asked for much faster Vim script.  Investigations have
shown that keeping the existing semantics of function calls make this close to
impossible, because of the overhead involved with calling a function, setting
up the local function scope and executing lines.  There are many details that
need to be handled, such as error messages and exceptions.  The need to create
a dictionary for a: and l: scopes, the a:000 list and several others add too
much overhead that cannot be avoided.

Therefore the `:def` method to define a new-style function had to be added,
which allows for a function with different semantics.  Most things still work
as before, but some parts do not.  A new way to define a function was
considered the best way to separate the legacy style code from Vim9 style code.

Using "def" to define a function comes from Python. Other languages use
"function" which clashes with legacy Vim script.


Type checking ~

When compiling lines of Vim commands into instructions as much as possible
should be done at compile time.  Postponing it to runtime makes the execution
slower and means mistakes are found only later.  For example, when
encountering the "+" character and compiling this into a generic add
instruction, at runtime the instruction would have to inspect the type of the
arguments and decide what kind of addition to do.  And when the type is
dictionary throw an error.  If the types are known to be numbers then an "add
number" instruction can be used, which is faster.  The error can be given at
compile time, no error handling is needed at runtime, since adding two numbers
cannot fail.

The syntax for types, using <type> for compound types, is similar to Java.  It
is easy to understand and widely used.  The type names are what were used in
Vim before, with some additions such as "void" and "bool".


Removing clutter and weirdness ~

Once decided that `:def` functions have different syntax than legacy functions,
we are free to add improvements to make the code more familiar for users who
know popular programming languages.  In other words: remove weird things that
only Vim does.

We can also remove clutter, mainly things that were done to make Vim script
backwards compatible with the good old Vi commands.

Examples:
- Drop `:call` for calling a function and `:eval` for evaluating an
  expression.
- Drop using a leading backslash for line continuation, automatically figure
  out where an expression ends.

However, this does require that some things need to change:
- Comments start with # instead of ", to avoid confusing them with strings.
  This is good anyway, it is also used by several popular languages.
- Ex command ranges need to be prefixed with a colon, to avoid confusion with
  expressions (single quote can be a string or a mark, "/" can be divide or a
  search command, etc.).

Goal is to limit the differences.  A good criteria is that when the old syntax
is accidentally used you are very likely to get an error message.


Syntax and semantics from popular languages ~

Script writers have complained that the Vim script syntax is unexpectedly
different from what they are used to.  To reduce this complaint popular
languages are used as an example.  At the same time, we do not want to abandon
the well-known parts of legacy Vim script.

For many things TypeScript is followed.  It's a recent language that is
gaining popularity and has similarities with Vim script.  It also has a
mix of static typing (a variable always has a known value type) and dynamic
typing (a variable can have different types, this changes at runtime).  Since
legacy Vim script is dynamically typed and a lot of existing functionality
(esp. builtin functions) depends on that, while static typing allows for much
faster execution, we need to have this mix in Vim9 script.

There is no intention to completely match TypeScript syntax and semantics.  We
just want to take those parts that we can use for Vim and we expect Vim users
will be happy with.  TypeScript is a complex language with its own history,
advantages and disadvantages.  To get an idea of the disadvantages read the
book: "JavaScript: The Good Parts".  Or find the article "TypeScript: the good
parts" and read the "Things to avoid" section.

People familiar with other languages (Java, Python, etc.) will also find
things in TypeScript that they do not like or do not understand.  We'll try to
avoid those things.

Specific items from TypeScript we avoid:
- Overloading "+", using it both for addition and string concatenation.  This
  goes against legacy Vim script and often leads to mistakes.  For that reason
  we will keep using ".." for string concatenation.  Lua also uses ".." this
  way.  And it allows for conversion to string for more values.
- TypeScript can use an expression like "99 || 'yes'" in a condition, but
  cannot assign the value to a boolean.  That is inconsistent and can be
  annoying.  Vim recognizes an expression with && or || and allows using the
  result as a bool.  The |falsy-operator| was added for the mechanism to use a
  default value.
- TypeScript considers an empty string as Falsy, but an empty list or dict as
  Truthy.  That is inconsistent.  In Vim an empty list and dict are also
  Falsy.
- TypeScript has various "Readonly" types, which have limited usefulness,
  since a type cast can remove the immutable nature.  Vim locks the value,
  which is more flexible, but is only checked at runtime.
- TypeScript has a complicated "import" statement that does not match how the
  Vim import mechanism works.  A much simpler mechanism is used instead, which
  matches that the imported script is only sourced once.


Declarations ~

Legacy Vim script uses `:let` for every assignment, while in Vim9 declarations
are used.  That is different, thus it's good to use a different command:
`:var`.  This is used in many languages.  The semantics might be slightly
different, but it's easily recognized as a declaration.

Using `:const`  for constants is common, but the semantics varies.  Some
languages only make the variable immutable, others also make the value
immutable.  Since "final" is well known from Java for only making the variable
immutable we decided to use that.  And then `:const` can be used for making
both immutable.  This was also used in legacy Vim script and the meaning is
almost the same.

What we end up with is very similar to Dart: >
	:var name	# mutable variable and value
	:final name	# immutable variable, mutable value
	:const name	# immutable variable and value

Since legacy and Vim9 script will be mixed and global variables will be
shared, optional type checking is desirable.  Also, type inference will avoid
the need for specifying the type in many cases.  The TypeScript syntax fits
best for adding types to declarations: >
	var name: string	  # string type is specified
	...
	name = 'John'
	const greeting = 'hello'  # string type is inferred

This is how we put types in a declaration: >
	var mylist: list<string>
	final mylist: list<string> = ['foo']
	def Func(arg1: number, arg2: string): bool

Two alternatives were considered:
1. Put the type before the name, like Dart: >
	var list<string> mylist
	final list<string> mylist = ['foo']
	def Func(number arg1, string arg2) bool
2. Put the type after the variable name, but do not use a colon, like Go: >
	var mylist list<string>
	final mylist list<string> = ['foo']
	def Func(arg1 number, arg2 string) bool

The first is more familiar for anyone used to C or Java.  The second one
doesn't really have an advantage over the first, so let's discard the second.

Since we use type inference the type can be left out when it can be inferred
from the value.  This means that after `var` we don't know if a type or a name
follows.  That makes parsing harder, not only for Vim but also for humans.
Also, it will not be allowed to use a variable name that could be a type name,
using `var string string` is too confusing.

The chosen syntax, using a colon to separate the name from the type, adds
punctuation, but it actually makes it easier to recognize the parts of a
declaration.


Expressions ~

Expression evaluation was already close to what other languages are doing.
Some details are unexpected and can be improved.  For example a boolean
condition would accept a string, convert it to a number and check if the
number is non-zero.  This is unexpected and often leads to mistakes, since
text not starting with a number would be converted to zero, which is
considered false.  Thus using a string for a condition would often not give an
error and be considered false.  That is confusing.

In Vim9 type checking is stricter to avoid mistakes.  Where a condition is
used, e.g. with the `:if` command and the `||` operator, only boolean-like
values are accepted:
	true:  `true`, `v:true`, `1`, `0 < 9`
	false: `false`, `v:false`, `0`, `0 > 9`
Note that the number zero is false and the number one is true.  This is more
permissive than most other languages.  It was done because many builtin
functions return these values, and changing that causes more problems than it
solves.  After using this for a while it turned out to work well.

If you have any type of value and want to use it as a boolean, use the `!!`
operator:
	true: `!!'text'`   `!![99]`   `!!{'x': 1}`   `!!99`
	false: `!!''`   `!![]`   `!!{}`

From a language like JavaScript we have this handy construct: >
	GetName() || 'unknown'
However, this conflicts with only allowing a boolean for a condition.
Therefore the "??" operator was added: >
	GetName() ?? 'unknown'
Here you can explicitly express your intention to use the value as-is and not
result in a boolean. This is called the |falsy-operator|.


Import and Export ~

A problem of legacy Vim script is that by default all functions and variables
are global.  It is possible to make them script-local, but then they are not
available in other scripts.  This defies the concept of a package that only
exports selected items and keeps the rest local.

In Vim9 script a mechanism very similar to the JavaScript import and export
mechanism is supported.  It is a variant to the existing `:source` command
that works like one would expect:
- Instead of making everything global by default, everything is script-local,
  some of these are exported.
- When importing a script the symbols that are imported are explicitly listed,
  avoiding name conflicts and failures if functionality is added later.
- The mechanism allows for writing a big, long script with a very clear API:
  the exported functions, variables and classes.
- By using relative paths loading can be much faster for an import inside of a
  package, no need to search many directories.
- Once an import has been used, its items are cached and loading it again is
  not needed.
- The Vim-specific use of "s:" to make things script-local can be dropped.

When sourcing a Vim9 script (from a Vim9 or legacy script), only the items
defined globally can be used, not the exported items.  Alternatives
considered:
- All the exported items become available as script-local items.  This makes
  it uncontrollable what items get defined and likely soon leads to trouble.
- Use the exported items and make them global.  Disadvantage is that it's then
  not possible to avoid name clashes in the global namespace.
- Completely disallow sourcing a Vim9 script, require using `:import`.  That
  makes it difficult to use scripts for testing, or sourcing them from the
  command line to try them out.
Note that you CAN also use `:import` in legacy Vim script, see above.


Compiling functions early ~

Functions are compiled when called or when `:defcompile` is used.  Why not
compile them early, so that syntax and type errors are reported early?

The functions can't be compiled right away when encountered, because there may
be forward references to functions defined later.  Consider defining functions
A, B and C, where A calls B, B calls C, and C calls A again.  It's impossible
to reorder the functions to avoid forward references.

An alternative would be to first scan through the file to locate items and
figure out their type, so that forward references are found, and only then
execute the script and compile the functions.  This means the script has to be
parsed twice, which is slower, and some conditions at the script level, such
as checking if a feature is supported, are hard to use.  An attempt was made
to see if it works, but it turned out to be impossible to make work well.

It would be possible to compile all the functions at the end of the script.
The drawback is that if a function never gets called, the overhead of
compiling it counts anyway.  Since startup speed is very important, in most
cases it's better to do it later and accept that syntax and type errors are
only reported then.  In case these errors should be found early, e.g. when
testing, a `:defcompile` command at the end of the script will help out.


Why not use an existing embedded language? ~

Vim supports interfaces to Perl, Python, Lua, Tcl and a few others.  But
these interfaces have never become widely used, for various reasons.  When
Vim9 was designed a decision was made to make these interfaces lower priority
and concentrate on Vim script.

Still, plugin writers may find other languages more familiar, want to use
existing libraries or see a performance benefit.  We encourage plugin authors
to write code in any language and run it as an external process, using jobs
and channels.  We can try to make this easier somehow.

Using an external tool also has disadvantages.  An alternative is to convert
the tool into Vim script.  For that to be possible without too much
translation, and keeping the code fast at the same time, the constructs of the
tool need to be supported.  Since most languages support classes the lack of
support for classes in Vim is then a problem.



 vim:tw=78:ts=8:noet:ft=help:norl: