src/testdir/test_quickfix.vim

" Test for the quickfix commands.

if !has('quickfix')
  finish
endif

" Tests for the :clist and :llist commands
function XlistTests(cchar)
  let Xlist = a:cchar . 'list'
  let Xgetexpr = a:cchar . 'getexpr'

  " With an empty list, command should return error
  exe Xgetexpr . ' []'
  exe 'silent! ' . Xlist
  call assert_true(v:errmsg ==# 'E42: No Errors')

  " Populate the list and then try
  exe Xgetexpr . " ['non-error 1', 'Xtestfile1:1:3:Line1',
		  \ 'non-error 2', 'Xtestfile2:2:2:Line2',
		  \ 'non-error 3', 'Xtestfile3:3:1:Line3']"

  " List only valid entries
  redir => result
  exe Xlist
  redir END
  let l = split(result, "\n")
  call assert_equal([' 2 Xtestfile1:1 col 3: Line1',
		   \ ' 4 Xtestfile2:2 col 2: Line2',
		   \ ' 6 Xtestfile3:3 col 1: Line3'], l)

  " List all the entries
  redir => result
  exe Xlist . "!"
  redir END
  let l = split(result, "\n")
  call assert_equal([' 1: non-error 1', ' 2 Xtestfile1:1 col 3: Line1',
		   \ ' 3: non-error 2', ' 4 Xtestfile2:2 col 2: Line2',
		   \ ' 5: non-error 3', ' 6 Xtestfile3:3 col 1: Line3'], l)

  " List a range of errors
  redir => result
  exe Xlist . " 3,6"
  redir END
  let l = split(result, "\n")
  call assert_equal([' 4 Xtestfile2:2 col 2: Line2',
		   \ ' 6 Xtestfile3:3 col 1: Line3'], l)

  redir => result
  exe Xlist . "! 3,4"
  redir END
  let l = split(result, "\n")
  call assert_equal([' 3: non-error 2', ' 4 Xtestfile2:2 col 2: Line2'], l)

  redir => result
  exe Xlist . " -6,-4"
  redir END
  let l = split(result, "\n")
  call assert_equal([' 2 Xtestfile1:1 col 3: Line1'], l)

  redir => result
  exe Xlist . "! -5,-3"
  redir END
  let l = split(result, "\n")
  call assert_equal([' 2 Xtestfile1:1 col 3: Line1',
		   \ ' 3: non-error 2', ' 4 Xtestfile2:2 col 2: Line2'], l)
endfunction

function Test_clist()
  call XlistTests('c')
  call XlistTests('l')
endfunction

" Tests for the :colder, :cnewer, :lolder and :lnewer commands
" Note that this test assumes that a quickfix/location list is
" already set by previous tests
function XageTests(cchar)
  let Xolder = a:cchar . 'older'
  let Xnewer = a:cchar . 'newer'
  let Xgetexpr = a:cchar . 'getexpr'
  if a:cchar == 'c'
    let Xgetlist = 'getqflist()'
  else
    let Xgetlist = 'getloclist(0)'
  endif

  " Jumping to a non existent list should return error
  exe 'silent! ' . Xolder . ' 99'
  call assert_true(v:errmsg ==# 'E380: At bottom of quickfix stack')

  exe 'silent! ' . Xnewer . ' 99'
  call assert_true(v:errmsg ==# 'E381: At top of quickfix stack')

  " Add three quickfix/location lists
  exe Xgetexpr . " ['Xtestfile1:1:3:Line1']"
  exe Xgetexpr . " ['Xtestfile2:2:2:Line2']"
  exe Xgetexpr . " ['Xtestfile3:3:1:Line3']"

  " Go back two lists
  exe Xolder
  exe 'let l = ' . Xgetlist
  call assert_equal('Line2', l[0].text)

  " Go forward two lists
  exe Xnewer
  exe 'let l = ' . Xgetlist
  call assert_equal('Line3', l[0].text)

  " Test for the optional count argument
  exe Xolder . ' 2'
  exe 'let l = ' . Xgetlist
  call assert_equal('Line1', l[0].text)

  exe Xnewer . ' 2'
  exe 'let l = ' . Xgetlist
  call assert_equal('Line3', l[0].text)
endfunction

function Test_cage()
  call XageTests('c')
  call XageTests('l')
endfunction

" Tests for the :cwindow, :lwindow :cclose, :lclose, :copen and :lopen
" commands
function XwindowTests(cchar)
  let Xwindow = a:cchar . 'window'
  let Xclose = a:cchar . 'close'
  let Xopen = a:cchar . 'open'
  let Xgetexpr = a:cchar . 'getexpr'

  " Create a list with no valid entries
  exe Xgetexpr . " ['non-error 1', 'non-error 2', 'non-error 3']"

  " Quickfix/Location window should not open with no valid errors
  exe Xwindow
  call assert_true(winnr('$') == 1)

  " Create a list with valid entries
  exe Xgetexpr . " ['Xtestfile1:1:3:Line1', 'Xtestfile2:2:2:Line2',
		  \ 'Xtestfile3:3:1:Line3']"

  " Open the window
  exe Xwindow
  call assert_true(winnr('$') == 2 && winnr() == 2 &&
	\ getline('.') ==# 'Xtestfile1|1 col 3| Line1')

  " Close the window
  exe Xclose
  call assert_true(winnr('$') == 1)

  " Create a list with no valid entries
  exe Xgetexpr . " ['non-error 1', 'non-error 2', 'non-error 3']"

  " Open the window
  exe Xopen . ' 5'
  call assert_true(winnr('$') == 2 && getline('.') ==# '|| non-error 1'
		      \  && winheight('.') == 5)

  " Opening the window again, should move the cursor to that window
  wincmd t
  exe Xopen . ' 7'
  call assert_true(winnr('$') == 2 && winnr() == 2 &&
	\ winheight('.') == 7 &&
	\ getline('.') ==# '|| non-error 1')


  " Calling cwindow should close the quickfix window with no valid errors
  exe Xwindow
  call assert_true(winnr('$') == 1)
endfunction

function Test_cwindow()
  call XwindowTests('c')
  call XwindowTests('l')
endfunction

" Tests for the :cfile, :lfile, :caddfile, :laddfile, :cgetfile and :lgetfile
" commands.
function XfileTests(cchar)
  let Xfile = a:cchar . 'file'
  let Xgetfile = a:cchar . 'getfile'
  let Xaddfile = a:cchar . 'addfile'
  if a:cchar == 'c'
    let Xgetlist = 'getqflist()'
  else
    let Xgetlist = 'getloclist(0)'
  endif

  call writefile(['Xtestfile1:700:10:Line 700',
	\ 'Xtestfile2:800:15:Line 800'], 'Xqftestfile1')

  enew!
  exe Xfile . ' Xqftestfile1'
  exe 'let l = ' . Xgetlist
  call assert_true(len(l) == 2 &&
	\ l[0].lnum == 700 && l[0].col == 10 && l[0].text ==# 'Line 700' &&
	\ l[1].lnum == 800 && l[1].col == 15 && l[1].text ==# 'Line 800')

  " Run cfile/lfile from a modified buffer
  enew!
  silent! put ='Quickfix'
  exe 'silent! ' . Xfile . ' Xqftestfile1'
  call assert_true(v:errmsg ==# 'E37: No write since last change (add ! to override)')

  call writefile(['Xtestfile3:900:30:Line 900'], 'Xqftestfile1')
  exe Xaddfile . ' Xqftestfile1'
  exe 'let l = ' . Xgetlist
  call assert_true(len(l) == 3 &&
	\ l[2].lnum == 900 && l[2].col == 30 && l[2].text ==# 'Line 900')

  call writefile(['Xtestfile1:222:77:Line 222',
	\ 'Xtestfile2:333:88:Line 333'], 'Xqftestfile1')

  enew!
  exe Xgetfile . ' Xqftestfile1'
  exe 'let l = ' . Xgetlist
  call assert_true(len(l) == 2 &&
	\ l[0].lnum == 222 && l[0].col == 77 && l[0].text ==# 'Line 222' &&
	\ l[1].lnum == 333 && l[1].col == 88 && l[1].text ==# 'Line 333')

  call delete('Xqftestfile1')
endfunction

function Test_cfile()
  call XfileTests('c')
  call XfileTests('l')
endfunction

" Tests for the :cbuffer, :lbuffer, :caddbuffer, :laddbuffer, :cgetbuffer and
" :lgetbuffer commands.
function XbufferTests(cchar)
  let Xbuffer = a:cchar . 'buffer'
  let Xgetbuffer = a:cchar . 'getbuffer'
  let Xaddbuffer = a:cchar . 'addbuffer'
  if a:cchar == 'c'
    let Xgetlist = 'getqflist()'
  else
    let Xgetlist = 'getloclist(0)'
  endif

  enew!
  silent! call setline(1, ['Xtestfile7:700:10:Line 700',
	\ 'Xtestfile8:800:15:Line 800'])
  exe Xbuffer . "!"
  exe 'let l = ' . Xgetlist
  call assert_true(len(l) == 2 &&
	\ l[0].lnum == 700 && l[0].col == 10 && l[0].text ==# 'Line 700' &&
	\ l[1].lnum == 800 && l[1].col == 15 && l[1].text ==# 'Line 800')

  enew!
  silent! call setline(1, ['Xtestfile9:900:55:Line 900',
	\ 'Xtestfile10:950:66:Line 950'])
  exe Xgetbuffer
  exe 'let l = ' . Xgetlist
  call assert_true(len(l) == 2 &&
	\ l[0].lnum == 900 && l[0].col == 55 && l[0].text ==# 'Line 900' &&
	\ l[1].lnum == 950 && l[1].col == 66 && l[1].text ==# 'Line 950')

  enew!
  silent! call setline(1, ['Xtestfile11:700:20:Line 700',
	\ 'Xtestfile12:750:25:Line 750'])
  exe Xaddbuffer
  exe 'let l = ' . Xgetlist
  call assert_true(len(l) == 4 &&
	\ l[1].lnum == 950 && l[1].col == 66 && l[1].text ==# 'Line 950' &&
	\ l[2].lnum == 700 && l[2].col == 20 && l[2].text ==# 'Line 700' &&
	\ l[3].lnum == 750 && l[3].col == 25 && l[3].text ==# 'Line 750')

endfunction

function Test_cbuffer()
  call XbufferTests('c')
  call XbufferTests('l')
endfunction