diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt
index 339a01e..2ee1c24 100644
--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -9750,7 +9750,10 @@
 		    "callback"	    the callback
 		    "paused"	    1 if the timer is paused, 0 otherwise
 
-		{only available when compiled with the |+timers| feature}
+		Can also be used as a |method|: >
+			GetTimer()->timer_info()
+
+<		{only available when compiled with the |+timers| feature}
 
 timer_pause({timer}, {paused})				*timer_pause()*
 		Pause or unpause a timer.  A paused timer does not invoke its
@@ -9765,7 +9768,10 @@
 		String, then the timer is paused, otherwise it is unpaused.
 		See |non-zero-arg|.
 
-		{only available when compiled with the |+timers| feature}
+		Can also be used as a |method|: >
+			GetTimer()->timer_pause(1)
+
+<		{only available when compiled with the |+timers| feature}
 
 						*timer_start()* *timer* *timers*
 timer_start({time}, {callback} [, {options}])
@@ -9798,7 +9804,10 @@
 <		This will invoke MyHandler() three times at 500 msec
 		intervals.
 
-		Not available in the |sandbox|.
+		Can also be used as a |method|: >
+			GetMsec()->timer_start(callback)
+
+<		Not available in the |sandbox|.
 		{only available when compiled with the |+timers| feature}
 
 timer_stop({timer})					*timer_stop()*
@@ -9806,7 +9815,10 @@
 		{timer} is an ID returned by timer_start(), thus it must be a
 		Number.  If {timer} does not exist there is no error.
 
-		{only available when compiled with the |+timers| feature}
+		Can also be used as a |method|: >
+			GetTimer()->timer_stop()
+
+<		{only available when compiled with the |+timers| feature}
 
 timer_stopall()						*timer_stopall()*
 		Stop all timers.  The timer callbacks will no longer be
@@ -9820,11 +9832,17 @@
 		characters turned into lowercase (just like applying |gu| to
 		the string).
 
+		Can also be used as a |method|: >
+			GetText()->tolower()
+
 toupper({expr})						*toupper()*
 		The result is a copy of the String given, with all lowercase
 		characters turned into uppercase (just like applying |gU| to
 		the string).
 
+		Can also be used as a |method|: >
+			GetText()->toupper()
+
 tr({src}, {fromstr}, {tostr})				*tr()*
 		The result is a copy of the {src} string with all characters
 		which appear in {fromstr} replaced by the character in that
@@ -9839,6 +9857,9 @@
 			echo tr("<blob>", "<>", "{}")
 <		returns "{blob}"
 
+		Can also be used as a |method|: >
+			GetText()->tr(from, to)
+
 trim({text} [, {mask}])						*trim()*
 		Return {text} as a String where any character in {mask} is
 		removed from the beginning and  end of {text}.
@@ -9855,6 +9876,9 @@
 			echo trim("rm<Xrm<>X>rrm", "rm<>")
 <		returns "Xrm<>X" (characters in the middle are not removed)
 
+		Can also be used as a |method|: >
+			GetText()->trim()
+
 trunc({expr})							*trunc()*
 		Return the largest integral value with magnitude less than or
 		equal to {expr} as a |Float| (truncate towards zero).
@@ -9915,6 +9939,9 @@
 		When compiled without the |+persistent_undo| option this always
 		returns an empty string.
 
+		Can also be used as a |method|: >
+			GetFilename()->undofile()
+
 undotree()						*undotree()*
 		Return the current state of the undo tree in a dictionary with
 		the following items:
@@ -10013,8 +10040,11 @@
 		all lines: >
 		    echo max(map(range(1, line('$')), "virtcol([v:val, '$'])"))
 
+<		Can also be used as a |method|: >
+			GetPos()->virtcol()
 
-visualmode([expr])						*visualmode()*
+
+visualmode([{expr}])						*visualmode()*
 		The result is a String, which describes the last Visual mode
 		used in the current buffer.  Initially it returns an empty
 		string, but once Visual mode has been used, it returns "v",
@@ -10028,7 +10058,7 @@
 		Visual mode that was used.
 		If Visual mode is active, use |mode()| to get the Visual mode
 		(e.g., in a |:vmap|).
-		If [expr] is supplied and it evaluates to a non-zero Number or
+		If {expr} is supplied and it evaluates to a non-zero Number or
 		a non-empty String, then the Visual mode will be cleared and
 		the old value is returned.  See |non-zero-arg|.
 
@@ -10057,10 +10087,17 @@
 		Not all commands are allowed in popup windows.
 		When window {id} does not exist then no error is given.
 
+		Can also be used as a |method|, the base is used for the
+		command: >
+			GetCommand()->win_execute(winid)
+
 win_findbuf({bufnr})					*win_findbuf()*
 		Returns a list with |window-ID|s for windows that contain
 		buffer {bufnr}.  When there is none the list is empty.
 
+		Can also be used as a |method|: >
+			GetBufnr()->win_findbuf()
+
 win_getid([{win} [, {tab}]])				*win_getid()*
 		Get the |window-ID| for the specified window.
 		When {win} is missing use the current window.
@@ -10070,20 +10107,32 @@
 		number {tab}.  The first tab has number one.
 		Return zero if the window cannot be found.
 
+		Can also be used as a |method|: >
+			GetWinnr()->win_getid()
+
 win_gotoid({expr})					*win_gotoid()*
 		Go to window with ID {expr}.  This may also change the current
 		tabpage.
 		Return 1 if successful, 0 if the window cannot be found.
 
+		Can also be used as a |method|: >
+			GetWinid()->win_gotoid()
+
 win_id2tabwin({expr})					*win_id2tabwin()*
 		Return a list with the tab number and window number of window
 		with ID {expr}: [tabnr, winnr].
 		Return [0, 0] if the window cannot be found.
 
+		Can also be used as a |method|: >
+			GetWinid()->win_id2tabwin()
+
 win_id2win({expr})					*win_id2win()*
 		Return the window number of window with ID {expr}.
 		Return 0 if the window cannot be found in the current tabpage.
 
+		Can also be used as a |method|: >
+			GetWinid()->win_id2win()
+
 win_screenpos({nr})					*win_screenpos()*
 		Return the screen position of window {nr} as a list with two
 		numbers: [row, col].  The first window always has position
@@ -10092,6 +10141,9 @@
 		Return [0, 0] if the window cannot be found in the current
 		tabpage.
 
+		Can also be used as a |method|: >
+			GetWinid()->win_screenpos()
+<
 							*winbufnr()*
 winbufnr({nr})	The result is a Number, which is the number of the buffer
 		associated with window {nr}.  {nr} can be the window number or
@@ -10119,6 +10171,9 @@
 		This excludes any window toolbar line.
 		Examples: >
   :echo "The current window has " . winheight(0) . " lines."
+
+<		Can also be used as a |method|: >
+			GetWinid()->winheight()
 <
 winlayout([{tabnr}])					*winlayout()*
 		The result is a nested List containing the layout of windows
@@ -10149,6 +10204,9 @@
 			['col', [['leaf', 1002], ['row', ['leaf', 1003],
 					     ['leaf', 1001]]], ['leaf', 1000]]
 <
+		Can also be used as a |method|: >
+			GetTabnr()->winlayout()
+<
 							*winline()*
 winline()	The result is a Number, which is the screen line of the cursor
 		in the window.  This is counting screen lines from the top of
@@ -10182,6 +10240,9 @@
 			let window_count = winnr('$')
 			let prev_window = winnr('#')
 			let wnum = winnr('3k')
+
+<		Can also be used as a |method|: >
+			GetWinval()->winnr()
 <
 							*winrestcmd()*
 winrestcmd()	Returns a sequence of |:resize| commands that should restore
@@ -10210,6 +10271,9 @@
 		If you have changed the values the result is unpredictable.
 		If the window size changed the result won't be the same.
 
+		Can also be used as a |method|: >
+			GetView()->winrestview()
+<
 							*winsaveview()*
 winsaveview()	Returns a |Dictionary| that contains information to restore
 		the view of the current window.  Use |winrestview()| to
@@ -10247,6 +10311,9 @@
 <		For getting the terminal or screen size, see the 'columns'
 		option.
 
+		Can also be used as a |method|: >
+			GetWinid()->winwidth()
+
 
 wordcount()						*wordcount()*
 		The result is a dictionary of byte/chars/word statistics for
@@ -10308,6 +10375,9 @@
 			:let fl = readfile("foo", "b")
 			:call writefile(fl, "foocopy", "b")
 
+<		Can also be used as a |method|: >
+			GetText()->writefile("thefile")
+
 
 xor({expr}, {expr})					*xor()*
 		Bitwise XOR on the two arguments.  The arguments are converted