diff --git a/runtime/doc/gui.txt b/runtime/doc/gui.txt
index 5df8f53..2a8a70d 100644
--- a/runtime/doc/gui.txt
+++ b/runtime/doc/gui.txt
@@ -1,4 +1,4 @@
-*gui.txt*       For Vim version 8.1.  Last change: 2019 Jan 06
+*gui.txt*       For Vim version 8.1.  Last change: 2019 Apr 28
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -11,8 +11,9 @@
 3. Mouse Control		|gui-mouse|
 4. Making GUI Selections	|gui-selections|
 5. Menus			|menus|
-6. Extras			|gui-extras|
-7. Shell Commands		|gui-shell|
+6. Font				|gui-font|
+7. Extras			|gui-extras|
+8. Shell Commands		|gui-shell|
 
 Other GUI documentation:
 |gui_x11.txt|	For specific items of the X11 GUI.
@@ -1037,7 +1038,139 @@
 Note that a menu that starts with ']' will not be displayed.
 
 ==============================================================================
-6. Extras						*gui-extras*
+6. Font
+
+This section describes font related options.
+
+GUIFONT							*gui-font*
+
+'guifont' is the option that tells Vim what font to use.  In its simplest form
+the value is just one font name.  It can also be a list of font names
+separated with commas.  The first valid font is used.  When no valid font can
+be found you will get an error message. 
+
+On systems where 'guifontset' is supported (X11) and 'guifontset' is not
+empty, then 'guifont' is not used.  See |xfontset|.
+
+Note: As to the GTK GUIs, no error is given against any invalid names, and the
+first element of the list is always picked up and made use of.  This is
+because, instead of identifying a given name with a font, the GTK GUIs use it
+to construct a pattern and try to look up a font which best matches the
+pattern among available fonts, and this way, the matching never fails.  An
+invalid name doesn't matter because a number of font properties other than
+name will do to get the matching done.
+
+Spaces after a comma are ignored.  To include a comma in a font name precede
+it with a backslash.  Setting an option requires an extra backslash before a
+space and a backslash.  See also |option-backslash|.  For example: >
+    :set guifont=Screen15,\ 7x13,font\\,with\\,commas
+will make Vim try to use the font "Screen15" first, and if it fails it will
+try to use "7x13" and then "font,with,commas" instead.
+
+If none of the fonts can be loaded, Vim will keep the current setting.  If an
+empty font list is given, Vim will try using other resource settings (for X,
+it will use the Vim.font resource), and finally it will try some builtin
+default which should always be there ("7x13" in the case of X).  The font
+names given should be "normal" fonts.  Vim will try to find the related bold
+and italic fonts.
+
+For Win32, GTK, Motif, Mac OS and Photon: >
+    :set guifont=*
+will bring up a font requester, where you can pick the font you want.
+
+The font name depends on the GUI used.  See |setting-guifont| for a way to set
+'guifont' for various systems.
+
+For the GTK+ 2 and 3 GUIs, the font name looks like this: >
+    :set guifont=Andale\ Mono\ 11
+That's all.  XLFDs are not used.  For Chinese this is reported to work well: >
+    if has("gui_gtk2")
+      set guifont=Bitstream\ Vera\ Sans\ Mono\ 12,Fixed\ 12
+      set guifontwide=Microsoft\ Yahei\ 12,WenQuanYi\ Zen\ Hei\ 12
+    endif
+<
+(Replace gui_gtk2 with gui_gtk3 for the GTK+ 3 GUI)
+
+For Mac OSX you can use something like this: >
+    :set guifont=Monaco:h10
+Also see 'macatsui', it can help fix display problems.
+							*E236*
+Note that the fonts must be mono-spaced (all characters have the same width).
+An exception is GTK: all fonts are accepted, but mono-spaced fonts look best.
+
+To preview a font on X11, you might be able to use the "xfontsel" program.
+The "xlsfonts" program gives a list of all available fonts.
+
+For the Win32 GUI					*E244* *E245*
+- Takes these options in the font name (use a ':' to separate the options):
+	hXX - height is XX (points, can be floating-point)
+	wXX - width is XX (points, can be floating-point)
+	WXX - weight is XX (see Note on Weights below)
+	b   - bold. This is equivalent to setting the weight to 700.
+	i   - italic
+	u   - underline
+	s   - strikeout
+	cXX - character set XX.  Valid charsets are: ANSI, ARABIC, BALTIC,
+	      CHINESEBIG5, DEFAULT, EASTEUROPE, GB2312, GREEK, HANGEUL,
+	      HEBREW, JOHAB, MAC, OEM, RUSSIAN, SHIFTJIS, SYMBOL, THAI,
+	      TURKISH, VIETNAMESE ANSI and BALTIC.  Normally you would use
+	      "cDEFAULT".
+	qXX - quality XX.  Valid quality names are: PROOF, DRAFT, ANTIALIASED,
+	      NONANTIALIASED, CLEARTYPE, DEFAULT.  Normally you would use
+	      "qDEFAULT".
+	      Some quality values are not supported in legacy OSs.
+- A '_' can be used in the place of a space, so you don't need to use
+  backslashes to escape the spaces.
+Examples: >
+    :set guifont=courier_new:h12:w5:b:cRUSSIAN
+    :set guifont=Andale_Mono:h7.5:w4.5
+
+See also |font-sizes|.
+
+Note on Weights: Fonts often come with a variety of weights. "Normal" weights
+in Windows have a value of 400 and, left unspecified, this is the value that
+will be used when attempting to find fonts. Windows will often match fonts
+based on their weight with higher priority than the font name which means a
+Book or Medium variant of a font might be used despite specifying a Light or
+ExtraLight variant. If you are experiencing heavier weight substitution, then
+explicitly setting a lower weight value may mitigate against this unwanted
+substitution.
+
+
+GUIFONTWIDE						*gui-fontwide*
+
+When not empty, 'guifontwide' specifies a comma-separated list of fonts to be
+used for double-width characters.  The first font that can be loaded is
+used.
+
+Note: The size of these fonts must be exactly twice as wide as the one
+specified with 'guifont' and the same height.  If there is a mismatch then
+the text will not be drawn correctly.
+
+All GUI versions but GTK+:
+
+'guifontwide' is only used when 'encoding' is set to "utf-8" and
+'guifontset' is empty or invalid.
+When 'guifont' is set and a valid font is found in it and
+'guifontwide' is empty Vim will attempt to find a matching
+double-width font and set 'guifontwide' to it.
+
+GTK+ GUI only:  		    	*guifontwide_gtk*
+
+If set and valid, 'guifontwide' is always used for double width
+characters, even if 'encoding' is not set to "utf-8".
+Vim does not attempt to find an appropriate value for 'guifontwide'
+automatically.  If 'guifontwide' is empty Pango/Xft will choose the
+font for characters not available in 'guifont'.  Thus you do not need
+to set 'guifontwide' at all unless you want to override the choice
+made by Pango/Xft.
+
+Windows +multibyte only:		*guifontwide_win_mbyte*
+
+If set and valid, 'guifontwide' is used for IME instead of 'guifont'.
+
+==============================================================================
+7. Extras						*gui-extras*
 
 This section describes other features which are related to the GUI.
 
@@ -1081,7 +1214,7 @@
 http://www.lexikan.com/mincho.htm
 
 ==============================================================================
-7. Shell Commands					*gui-shell*
+8. Shell Commands					*gui-shell*
 
 For the X11 GUI the external commands are executed inside the gvim window.
 See |gui-pty|.
diff --git a/runtime/doc/mbyte.txt b/runtime/doc/mbyte.txt
index a645cab..15198f6 100644
--- a/runtime/doc/mbyte.txt
+++ b/runtime/doc/mbyte.txt
@@ -620,6 +620,21 @@
 locale.  You have to specify all the fonts that a locale requires in the
 'guifontset' option.
 
+Setting the 'guifontset' option also means that all font names will be handled
+as a fontset name.  Also the ones used for the "font" argument of the
+|:highlight| command.
+
+Note the difference between 'guifont' and 'guifontset': In 'guifont'
+the comma-separated names are alternative names, one of which will be
+used.  In 'guifontset' the whole string is one fontset name,
+including the commas.  It is not possible to specify alternative
+fontset names.
+This example works on many X11 systems: >
+	:set guifontset=-*-*-medium-r-normal--16-*-*-*-c-*-*-*
+<
+The fonts must match with the current locale.  If fonts for the character sets
+that the current locale uses are not included, setting 'guifontset' will fail.
+
 NOTE: The fontset always uses the current locale, even though 'encoding' may
 be set to use a different charset.  In that situation you might want to use
 'guifont' and 'guifontwide' instead of 'guifontset'.
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index 1502fc7..4e0bedd 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -3727,91 +3727,8 @@
 			{not in Vi}
 			{only available when compiled with GUI enabled}
 	This is a list of fonts which will be used for the GUI version of Vim.
-	In its simplest form the value is just one font name.  When
-	the font cannot be found you will get an error message.  To try other
-	font names a list can be specified, font names separated with commas.
-	The first valid font is used.
-
-	On systems where 'guifontset' is supported (X11) and 'guifontset' is
-	not empty, then 'guifont' is not used.
-
-	Note: As to the GTK GUIs, no error is given against any invalid names,
-	and the first element of the list is always picked up and made use of.
-	This is because, instead of identifying a given name with a font, the
-	GTK GUIs use it to construct a pattern and try to look up a font which
-	best matches the pattern among available fonts, and this way, the
-	matching never fails.  An invalid name doesn't matter because a number
-	of font properties other than name will do to get the matching done.
-
-	Spaces after a comma are ignored.  To include a comma in a font name
-	precede it with a backslash.  Setting an option requires an extra
-	backslash before a space and a backslash.  See also
-	|option-backslash|.  For example: >
-	    :set guifont=Screen15,\ 7x13,font\\,with\\,commas
-<	will make Vim try to use the font "Screen15" first, and if it fails it
-	will try to use "7x13" and then "font,with,commas" instead.
-
-	If none of the fonts can be loaded, Vim will keep the current setting.
-	If an empty font list is given, Vim will try using other resource
-	settings (for X, it will use the Vim.font resource), and finally it
-	will try some builtin default which should always be there ("7x13" in
-	the case of X).  The font names given should be "normal" fonts.  Vim
-	will try to find the related bold and italic fonts.
-
-	For Win32, GTK, Motif, Mac OS and Photon: >
-	    :set guifont=*
-<	will bring up a font requester, where you can pick the font you want.
-
-	The font name depends on the GUI used.  See |setting-guifont| for a
-	way to set 'guifont' for various systems.
-
-	For the GTK+ 2 and 3 GUIs, the font name looks like this: >
-	    :set guifont=Andale\ Mono\ 11
-<	That's all.  XLFDs are not used.  For Chinese this is reported to work
-	well: >
-	    if has("gui_gtk2")
-	      set guifont=Bitstream\ Vera\ Sans\ Mono\ 12,Fixed\ 12
-	      set guifontwide=Microsoft\ Yahei\ 12,WenQuanYi\ Zen\ Hei\ 12
-	    endif
-<
-        (Replace gui_gtk2 with gui_gtk3 for the GTK+ 3 GUI)
-
-	For Mac OSX you can use something like this: >
-	    :set guifont=Monaco:h10
-<	Also see 'macatsui', it can help fix display problems.
-								*E236*
-	Note that the fonts must be mono-spaced (all characters have the same
-	width).  An exception is GTK: all fonts are accepted, but mono-spaced
-	fonts look best.
-
-	To preview a font on X11, you might be able to use the "xfontsel"
-	program.  The "xlsfonts" program gives a list of all available fonts.
-
-	For the Win32 GUI					*E244* *E245*
-	- takes these options in the font name:
-		hXX - height is XX (points, can be floating-point)
-		wXX - width is XX (points, can be floating-point)
-		b   - bold
-		i   - italic
-		u   - underline
-		s   - strikeout
-		cXX - character set XX.  Valid charsets are: ANSI, ARABIC,
-		      BALTIC, CHINESEBIG5, DEFAULT, EASTEUROPE, GB2312, GREEK,
-		      HANGEUL, HEBREW, JOHAB, MAC, OEM, RUSSIAN, SHIFTJIS,
-		      SYMBOL, THAI, TURKISH, VIETNAMESE ANSI and BALTIC.
-		      Normally you would use "cDEFAULT".
-		qXX - quality XX.  Valid quality names are: PROOF, DRAFT,
-		      ANTIALIASED, NONANTIALIASED, CLEARTYPE, DEFAULT.
-		      Normally you would use "qDEFAULT".
-		      Some quality values are not supported in legacy OSs.
-
-	  Use a ':' to separate the options.
-	- A '_' can be used in the place of a space, so you don't need to use
-	  backslashes to escape the spaces.
-	- Examples: >
-	    :set guifont=courier_new:h12:w5:b:cRUSSIAN
-	    :set guifont=Andale_Mono:h7.5:w4.5
-<	See also |font-sizes|.
+	In its simplest form the value is just one font name.
+	See |gui-font| for the details.
 
 					*'guifontset'* *'gfs'*
 					*E250* *E252* *E234* *E597* *E598*
@@ -3824,20 +3741,7 @@
 	When not empty, specifies two (or more) fonts to be used.  The first
 	one for normal English, the second one for your special language.  See
 	|xfontset|.
-	Setting this option also means that all font names will be handled as
-	a fontset name.  Also the ones used for the "font" argument of the
-	|:highlight| command.
-	The fonts must match with the current locale.  If fonts for the
-	character sets that the current locale uses are not included, setting
-	'guifontset' will fail.
-	Note the difference between 'guifont' and 'guifontset': In 'guifont'
-	the comma-separated names are alternative names, one of which will be
-	used.  In 'guifontset' the whole string is one fontset name,
-	including the commas.  It is not possible to specify alternative
-	fontset names.
-	This example works on many X11 systems: >
-		:set guifontset=-*-*-medium-r-normal--16-*-*-*-c-*-*-*
-<
+
 				*'guifontwide'* *'gfw'* *E231* *E533* *E534*
 'guifontwide' 'gfw'	string	(default "")
 			global
@@ -3845,31 +3749,7 @@
 			{only available when compiled with GUI enabled}
 	When not empty, specifies a comma-separated list of fonts to be used
 	for double-width characters.  The first font that can be loaded is
-	used.
-	Note: The size of these fonts must be exactly twice as wide as the one
-	specified with 'guifont' and the same height.
-
-	All GUI versions but GTK+:
-
-	'guifontwide' is only used when 'encoding' is set to "utf-8" and
-	'guifontset' is empty or invalid.
-	When 'guifont' is set and a valid font is found in it and
-	'guifontwide' is empty Vim will attempt to find a matching
-	double-width font and set 'guifontwide' to it.
-
-	GTK+ GUI only:  		    	*guifontwide_gtk*
-
-	If set and valid, 'guifontwide' is always used for double width
-	characters, even if 'encoding' is not set to "utf-8".
-	Vim does not attempt to find an appropriate value for 'guifontwide'
-	automatically.  If 'guifontwide' is empty Pango/Xft will choose the
-	font for characters not available in 'guifont'.  Thus you do not need
-	to set 'guifontwide' at all unless you want to override the choice
-	made by Pango/Xft.
-
-	Windows +multibyte only:		*guifontwide_win_mbyte*
-
-	If set and valid, 'guifontwide' is used for IME instead of 'guifont'.
+	used.  See |gui-fontwide|.
 
 						*'guiheadroom'* *'ghr'*
 'guiheadroom' 'ghr'	number	(default 50)