diff --git a/runtime/doc/autocmd.txt b/runtime/doc/autocmd.txt
index 5acf733..73506cc 100644
--- a/runtime/doc/autocmd.txt
+++ b/runtime/doc/autocmd.txt
@@ -1,4 +1,4 @@
-*autocmd.txt*   For Vim version 9.0.  Last change: 2022 Nov 22
+*autocmd.txt*   For Vim version 9.0.  Last change: 2022 Dec 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -97,7 +97,7 @@
 and in a `:def` function) then {cmd} will be executed as in Vim9
 script.  Thus this depends on where the autocmd is defined, not where it is
 triggered.
-
+							*:autocmd-block*
 {cmd} can be a block, like with `:command`, see |:command-repl|.  Example: >
 	au BufReadPost *.xml {
 		  setlocal matchpairs+=<:>
diff --git a/runtime/doc/builtin.txt b/runtime/doc/builtin.txt
index 05e8d70..ea3ce61 100644
--- a/runtime/doc/builtin.txt
+++ b/runtime/doc/builtin.txt
@@ -1,4 +1,4 @@
-*builtin.txt*	For Vim version 9.0.  Last change: 2022 Dec 05
+*builtin.txt*	For Vim version 9.0.  Last change: 2022 Dec 23
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -4137,7 +4137,7 @@
 				this script name links to, if any, otherwise
 				zero
 		    variables   A dictionary with the script-local variables.
-				Present only when the a particular script is
+				Present only when a particular script is
 				specified using the "sid" item in {opts}.
 				Note that this is a copy, the value of
 				script-local variables cannot be changed using
@@ -9113,6 +9113,8 @@
 			Blob		0z00112233.44556677.8899
 			List		[item, item]
 			Dictionary	{key: value, key: value}
+			Class		class SomeName
+			Object		object of SomeName {lnum: 1, col: 3}
 
 		When a |List| or |Dictionary| has a recursive reference it is
 		replaced by "[...]" or "{...}".  Using eval() on the result
diff --git a/runtime/doc/diff.txt b/runtime/doc/diff.txt
index 1c93de4..2c1233b 100644
--- a/runtime/doc/diff.txt
+++ b/runtime/doc/diff.txt
@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 9.0.  Last change: 2022 Oct 01
+*diff.txt*      For Vim version 9.0.  Last change: 2022 Dec 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -148,6 +148,10 @@
 	'foldmethod'	"manual"
 	'foldcolumn'	0
 
+'foldenable' will most-likely be reset to off.  That is when 'foldmethod' is
+is restored to "manual".  The folds themselves are not cleared but they should
+not show up, resetting 'foldenable' is the best way to do that.
+
 ==============================================================================
 2. Viewing diffs						*view-diffs*
 
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index 87fd2cf..dc6e16b 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 9.0.  Last change: 2022 Dec 09
+*options.txt*	For Vim version 9.0.  Last change: 2022 Dec 31
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -34,6 +34,8 @@
 			key codes are not shown, because they are generated
 			internally and can't be changed.  Changing the terminal
 			codes in the GUI is not useful either...
+			The options have the form t_AB, see
+			|terminal-options|.
 
 :se[t]! termcap		Idem, but don't use multiple columns.
 
@@ -1249,7 +1251,7 @@
 		\ ' on word "' .. v:beval_text .. '"'
     endfunction
     set bexpr=MyBalloonExpr()
-    set ballooneval
+    set ballooneval balloonevalterm
 <
 	Also see |balloon_show()|, it can be used if the content of the balloon
 	is to be fetched asynchronously.  In that case evaluating
@@ -4936,6 +4938,12 @@
 			    CSI ?u	request kitty keyboard protocol state
 			    CSI >c	request the termresponse
 
+	If you notice problems, such as characters being displayed that
+	disappear after `CTRL-L`, you might want to try making this option
+	empty.  Then set the 'term' option to have it take effect: >
+		set keyprotocol=
+		let &term = &term
+
 
 					*'keywordprg'* *'kp'*
 'keywordprg' 'kp'	string	(default "man" or "man -s",  DOS: ":help",
@@ -7112,7 +7120,7 @@
 						*'shortmess'* *'shm'*
 'shortmess' 'shm'	string	(Vim default "filnxtToOS", Vi default: "S",
 							POSIX default: "AS")
-			global
+			global					*E1336*
 	This option helps to avoid all the |hit-enter| prompts caused by file
 	messages, for example  with CTRL-G, and to avoid some other messages.
 	It is a list of flags:
@@ -7127,30 +7135,30 @@
 		and "[a]" instead of "appended" for ':w >> file' command
 	  x	use "[dos]" instead of "[dos format]", "[unix]"		*shm-x*
 		instead of "[unix format]" and "[mac]" instead of "[mac
-		format]".
+		format]"
 	  a	all of the above abbreviations				*shm-a*
 
 	  o	overwrite message for writing a file with subsequent	*shm-o*
 		message for reading a file (useful for ":wn" or when
 		'autowrite' on)
-	  O	message for reading a file overwrites any previous	*smh-O*
-		message.  Also for quickfix message (e.g., ":cn").
+	  O	message for reading a file overwrites any previous	*shm-O*
+		message;  also for quickfix message (e.g., ":cn")
 	  s	don't give "search hit BOTTOM, continuing at TOP" or	*shm-s*
 		"search hit TOP, continuing at BOTTOM" messages; when using
 		the search count do not show "W" after the count message (see
 		S below)
 	  t	truncate file message at the start if it is too long	*shm-t*
 		to fit on the command-line, "<" will appear in the left most
-		column.  Ignored in Ex mode.
+		column; ignored in Ex mode
 	  T	truncate other messages in the middle if they are too	*shm-T*
-		long to fit on the command line.  "..." will appear in the
-		middle.  Ignored in Ex mode.
+		long to fit on the command line; "..." will appear in the
+		middle; ignored in Ex mode
 	  W	don't give "written" or "[w]" when writing a file	*shm-W*
 	  A	don't give the "ATTENTION" message when an existing	*shm-A*
-		swap file is found.
+		swap file is found
 	  I	don't give the intro message when starting Vim,		*shm-I*
-	  	see |:intro|.
-	  c	don't give |ins-completion-menu| messages.  For		*shm-c*
+	  	see |:intro|
+	  c	don't give |ins-completion-menu| messages; for		*shm-c*
 		example, "-- XXX completion (YYY)", "match 1 of 2", "The only
 		match", "Pattern not found", "Back at original", etc.
 	  C	don't give messages while scanning for ins-completion	*shm-C*
@@ -7227,11 +7235,12 @@
 
 			*'showcmdloc'* *'sloc'*
 'showcmdloc' 'sloc'	string	(default "last")
+			global
 	This option can be used to display the (partially) entered command in
 	another location.  Possible values are:
 	  last		Last line of the screen (default).
 	  statusline	Status line of the current window.
-	  tabline	First line of the screen if 'showtabine' is enabled.
+	  tabline	First line of the screen if 'showtabline' is enabled.
 	Setting this option to "statusline" or "tabline" means that these will
 	be redrawn whenever the command changes, which can be on every key
 	pressed.
diff --git a/runtime/doc/quickref.txt b/runtime/doc/quickref.txt
index ff508b5..ffdfd10 100644
--- a/runtime/doc/quickref.txt
+++ b/runtime/doc/quickref.txt
@@ -1,4 +1,4 @@
-*quickref.txt*  For Vim version 9.0.  Last change: 2022 Nov 23
+*quickref.txt*  For Vim version 9.0.  Last change: 2022 Dec 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -902,7 +902,8 @@
 'shortmess'	  'shm'     list of flags, reduce length of messages
 'shortname'	  'sn'	    Filenames assumed to be 8.3 chars
 'showbreak'	  'sbr'     string to use at the start of wrapped lines
-'showcmd'	  'sc'	    show (partial) command in status line
+'showcmd'	  'sc'	    show (partial) command somewhere
+'showcmdloc'	  'sloc'    where to show (partial) command
 'showfulltag'	  'sft'     show full tag pattern when completing tag
 'showmatch'	  'sm'	    briefly jump to matching bracket if insert one
 'showmode'	  'smd'     message on status line to show current mode
diff --git a/runtime/doc/sign.txt b/runtime/doc/sign.txt
index c366ae5..c698499 100644
--- a/runtime/doc/sign.txt
+++ b/runtime/doc/sign.txt
@@ -1,4 +1,4 @@
-*sign.txt*      For Vim version 9.0.  Last change: 2021 Dec 05
+*sign.txt*      For Vim version 9.0.  Last change: 2022 Dec 20
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur
@@ -625,9 +625,9 @@
 				then a new unique identifier is allocated.
 				Otherwise the specified number is used. See
 				|sign-identifier| for more information.
-		    lnum	line number in the buffer {expr} where the
-				sign is to be placed. For the accepted values,
-				see |line()|.
+		    lnum	line number in the buffer where the sign is to
+				be placed. For the accepted values, see
+				|line()|.
 		    name	name of the sign to place. See |sign_define()|
 		    		for more information.
 		    priority	priority of the sign. When multiple signs are
diff --git a/runtime/doc/syntax.txt b/runtime/doc/syntax.txt
index cd3dbca..27c65da 100644
--- a/runtime/doc/syntax.txt
+++ b/runtime/doc/syntax.txt
@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 9.0.  Last change: 2022 Nov 24
+*syntax.txt*	For Vim version 9.0.  Last change: 2022 Dec 26
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -5003,7 +5003,7 @@
 
 						*highlight-clear* *:hi-clear*
 :hi[ghlight] clear	Reset all highlighting to the defaults.  Removes all
-			highlighting for groups added by the user!
+			highlighting for groups added by the user.
 			Uses the current value of 'background' to decide which
 			default colors to use.
 			If there was a default link, restore it. |:hi-link|
diff --git a/runtime/doc/tags b/runtime/doc/tags
index 9178c77..66dd96a 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -438,10 +438,8 @@
 'keymap'	options.txt	/*'keymap'*
 'keymodel'	options.txt	/*'keymodel'*
 'keyprotocol'	options.txt	/*'keyprotocol'*
-'keywordprg'	options.txt	/*'keywordprg'*
 'km'	options.txt	/*'km'*
 'kmp'	options.txt	/*'kmp'*
-'kp'	options.txt	/*'kp'*
 'kpc'	options.txt	/*'kpc'*
 'langmap'	options.txt	/*'langmap'*
 'langmenu'	options.txt	/*'langmenu'*
@@ -926,6 +924,7 @@
 'shortname'	options.txt	/*'shortname'*
 'showbreak'	options.txt	/*'showbreak'*
 'showcmd'	options.txt	/*'showcmd'*
+'showcmdloc'	options.txt	/*'showcmdloc'*
 'showfulltag'	options.txt	/*'showfulltag'*
 'showmatch'	options.txt	/*'showmatch'*
 'showmode'	options.txt	/*'showmode'*
@@ -938,6 +937,7 @@
 'siso'	options.txt	/*'siso'*
 'sj'	options.txt	/*'sj'*
 'slm'	options.txt	/*'slm'*
+'sloc'	options.txt	/*'sloc'*
 'slow'	vi_diff.txt	/*'slow'*
 'slowopen'	vi_diff.txt	/*'slowopen'*
 'sm'	options.txt	/*'sm'*
@@ -2201,6 +2201,7 @@
 :aun	gui.txt	/*:aun*
 :aunmenu	gui.txt	/*:aunmenu*
 :autocmd	autocmd.txt	/*:autocmd*
+:autocmd-block	autocmd.txt	/*:autocmd-block*
 :autocmd-verbose	autocmd.txt	/*:autocmd-verbose*
 :b	windows.txt	/*:b*
 :bN	windows.txt	/*:bN*
@@ -3017,6 +3018,7 @@
 :pts	tagsrch.txt	/*:pts*
 :ptselect	tagsrch.txt	/*:ptselect*
 :pu	change.txt	/*:pu*
+:public	vim9class.txt	/*:public*
 :put	change.txt	/*:put*
 :pw	editing.txt	/*:pw*
 :pwd	editing.txt	/*:pwd*
@@ -4383,7 +4385,19 @@
 E1325	vim9class.txt	/*E1325*
 E1326	vim9class.txt	/*E1326*
 E1327	vim9class.txt	/*E1327*
+E1328	vim9class.txt	/*E1328*
+E1329	vim9class.txt	/*E1329*
 E133	userfunc.txt	/*E133*
+E1330	vim9class.txt	/*E1330*
+E1331	vim9class.txt	/*E1331*
+E1332	vim9class.txt	/*E1332*
+E1333	vim9class.txt	/*E1333*
+E1334	vim9class.txt	/*E1334*
+E1335	vim9class.txt	/*E1335*
+E1336	options.txt	/*E1336*
+E1337	vim9class.txt	/*E1337*
+E1338	vim9class.txt	/*E1338*
+E1339	textprop.txt	/*E1339*
 E134	change.txt	/*E134*
 E135	autocmd.txt	/*E135*
 E136	starting.txt	/*E136*
@@ -8200,6 +8214,7 @@
 keys()	builtin.txt	/*keys()*
 keytrans()	builtin.txt	/*keytrans()*
 kitty-keyboard-protocol	map.txt	/*kitty-keyboard-protocol*
+kitty-terminal	term.txt	/*kitty-terminal*
 known-bugs	todo.txt	/*known-bugs*
 l	motion.txt	/*l*
 l:	eval.txt	/*l:*
@@ -9575,6 +9590,7 @@
 shm-C	options.txt	/*shm-C*
 shm-F	options.txt	/*shm-F*
 shm-I	options.txt	/*shm-I*
+shm-O	options.txt	/*shm-O*
 shm-S	options.txt	/*shm-S*
 shm-T	options.txt	/*shm-T*
 shm-W	options.txt	/*shm-W*
@@ -9630,7 +9646,6 @@
 slow-fast-terminal	term.txt	/*slow-fast-terminal*
 slow-start	starting.txt	/*slow-start*
 slow-terminal	term.txt	/*slow-terminal*
-smh-O	options.txt	/*smh-O*
 socket-interface	channel.txt	/*socket-interface*
 sort()	builtin.txt	/*sort()*
 sorting	change.txt	/*sorting*
@@ -10312,6 +10327,7 @@
 test_getvalue()	testing.txt	/*test_getvalue()*
 test_gui_event()	testing.txt	/*test_gui_event()*
 test_ignore_error()	testing.txt	/*test_ignore_error()*
+test_mswin_event()	testing.txt	/*test_mswin_event()*
 test_null_blob()	testing.txt	/*test_null_blob()*
 test_null_channel()	testing.txt	/*test_null_channel()*
 test_null_dict()	testing.txt	/*test_null_dict()*
@@ -11068,6 +11084,7 @@
 xterm-end-home-keys	term.txt	/*xterm-end-home-keys*
 xterm-focus-event	term.txt	/*xterm-focus-event*
 xterm-function-keys	term.txt	/*xterm-function-keys*
+xterm-kitty	term.txt	/*xterm-kitty*
 xterm-modifier-keys	term.txt	/*xterm-modifier-keys*
 xterm-mouse	options.txt	/*xterm-mouse*
 xterm-mouse-wheel	scroll.txt	/*xterm-mouse-wheel*
@@ -11076,6 +11093,7 @@
 xterm-screens	tips.txt	/*xterm-screens*
 xterm-scroll-region	term.txt	/*xterm-scroll-region*
 xterm-shifted-keys	term.txt	/*xterm-shifted-keys*
+xterm-terminfo-entries	term.txt	/*xterm-terminfo-entries*
 xterm-true-color	term.txt	/*xterm-true-color*
 y	change.txt	/*y*
 yaml.vim	syntax.txt	/*yaml.vim*
diff --git a/runtime/doc/term.txt b/runtime/doc/term.txt
index 146ef47..f519bed 100644
--- a/runtime/doc/term.txt
+++ b/runtime/doc/term.txt
@@ -1,4 +1,4 @@
-*term.txt*      For Vim version 9.0.  Last change: 2022 Dec 01
+*term.txt*      For Vim version 9.0.  Last change: 2022 Dec 31
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -88,7 +88,8 @@
 
 Note: When 't_ti' is not empty, Vim assumes that it causes switching to the
 alternate screen.  This may slightly change what happens when executing a
-shell command or exiting Vim.  To avoid this use 't_TI' and 't_TE'.
+shell command or exiting Vim.  To avoid this use 't_TI' and 't_TE' (but make
+sure to add to them, not overwrite).
 
 Vim will try to detect what keyboard protocol the terminal is using with the
 't_RK' termcap entry.  This is sent after 't_TI', but only when there is no
@@ -126,7 +127,11 @@
 	  exec "set t_PS=\e[200~"
 	  exec "set t_PE=\e[201~"
 	endif
-<
+
+The terminfo entries "BE", "BD", "PS" and "PE" were added in ncurses version
+6.4, early 2023, for some terminals.  If you have this version then you may
+not have to manually configure your terminal.
+
 							*tmux-integration*
 If you experience issues when running Vim inside tmux, here are a few hints.
 You can comment-out parts if something doesn't work (it may depend on the
@@ -294,13 +299,32 @@
 starts with CSI, it assumes that the terminal is in 8-bit mode and will
 convert all key sequences to their 8-bit variants.
 
+						*xterm-terminfo-entries*
+For some time the terminfo entries were insufficient to describe all the
+features tht Vim can use.  The builtin xterm termcap entries did have these,
+with the result that several terminals that were similar enough to xterm took
+advantage of these by prefixing "xterm-" to the terminal name in $TERM.
+
+This leads to problems, because quite often these terminals are not 100%
+compatible with xterm.  At the start of 2023 several entries have been added
+to the terminfo database to make it possible to use these features without
+using the "xterm" workaround.  These are the relevant entries (so far):
+
+	name	xterm value	description ~
+	RV	"\033[>c"	Request version |t_RV|
+
+	BE	"\033[?2004h"	enable bracketed paste mode |t_BE|
+	BD	"\033[?2004l"	disable bracketed paste mode |t_BD|
+	PS	"\033[200~"	pasted text start |t_PS|
+	PE	"\033[201~"	pasted text end |t_PE|
+
 						*xterm-kitty* *kitty-terminal*
-The Kitty terminal is a special case.  Mainly because it works different from
-most other terminals, but also because, instead of trying the fit in and make
-it behave like other terminals by default, it dictates how applications need
-to work when using Kitty.  This makes it very difficult for Vim to work in a
-Kitty terminal.  Some exceptions have been hard coded, but it is not at all
-nice to have to make exceptions for one specific terminal.
+The Kitty terminal is a special case.  Mainly because it works differently
+from most other terminals, but also because, instead of trying the fit in and
+make it behave like other terminals by default, it dictates how applications
+need to work when using Kitty.  This makes it very difficult for Vim to work
+in a Kitty terminal.  Some exceptions have been hard coded, but it is not at
+all nice to have to make exceptions for one specific terminal.
 
 One of the problems is that the value for $TERM is set to "xterm-kitty".  For
 Vim this is an indication that the terminal is xterm-compatible and the
@@ -448,10 +472,10 @@
 	t_Si	save icon text to stack				*t_Si* *'t_Si'*
 	t_Ri	restore icon text from stack			*t_Ri* *'t_Ri'*
 	t_TE	end of "raw" mode				*t_TE* *'t_TE'*
-	t_TI	put terminal into "raw" mode 			*t_TI* *'t_TI'*
-	t_fe	enable focus-event tracking 			*t_fe* *'t_fe'*
+	t_TI	put terminal into "raw" mode			*t_TI* *'t_TI'*
+	t_fe	enable focus-event tracking			*t_fe* *'t_fe'*
 		|xterm-focus-event|
-	t_fd	disable focus-event tracking 			*t_fd* *'t_fd'*
+	t_fd	disable focus-event tracking			*t_fd* *'t_fd'*
 		|xterm-focus-event|
 
 Some codes have a start, middle and end part.  The start and end are defined
@@ -461,8 +485,8 @@
 	set cursor color:   t_SC  {color name}  t_EC
 
 t_SH must take one argument:
-	0, 1 or none  	blinking block cursor
-	2	      	block cursor
+	0, 1 or none	blinking block cursor
+	2		block cursor
 	3		blinking underline cursor
 	4		underline cursor
 	5		blinking vertical bar cursor
@@ -531,6 +555,7 @@
 	t_%1	<Help>		help key			*t_%1* *'t_%1'*
 	t_&8	<Undo>		undo key			*t_&8* *'t_&8'*
 	t_kI	<Insert>	insert key			*t_kI* *'t_kI'*
+		<kInsert>	keypad insert key
 	t_kD	<Del>		delete key			*t_kD* *'t_kD'*
 	t_kb	<BS>		backspace key			*t_kb* *'t_kb'*
 	t_kB	<S-Tab>		back-tab (shift-tab)  *<S-Tab>*	*t_kB* *'t_kB'*
@@ -563,9 +588,13 @@
 	t_KK	<k8>		keypad 8		 *<k8>*	*t_KK* *'t_KK'*
 	t_KL	<k9>		keypad 9		 *<k9>*	*t_KL* *'t_KL'*
 		<Mouse>		leader of mouse code		*<Mouse>*
-								*t_PS* *'t_PS'*
-	t_PS	start of bracketed paste |xterm-bracketed-paste|
-	t_PE	end of bracketed paste |xterm-bracketed-paste|  *t_PE* *'t_PE'*
+
+	t_PS	<PasteStart>	start of bracketed paste	*t_PS* *'t_PS'*
+				|xterm-bracketed-paste|
+	t_PE	<PasteEnd>	end of bracketed paste		*t_PE* *'t_PE'*
+				|xterm-bracketed-paste|
+		<FocusGained>	Vim window got focus (internal only)
+		<FocusLost>	Vim window lost focus (internal only)
 
 Note about t_so and t_mr: When the termcap entry "so" is not present the
 entry for "mr" is used.  And vice versa.  The same is done for "se" and "me".
@@ -604,12 +633,15 @@
 See https://github.com/termstandard/colors for a list of terminals that
 support true colors.
 
-Sometimes setting 'termguicolors' is not enough and one has to set the |t_8f|
-and |t_8b| options explicitly. Default values of these options are
-"^[[38;2;%lu;%lu;%lum" and "^[[48;2;%lu;%lu;%lum" respectively, but it is only
-set when `$TERM` is `xterm`. Some terminals accept the same sequences, but
-with all semicolons replaced by colons (this is actually more compatible, but
-less widely supported): >
+For telling the terminal what RGB color to use the |t_8f| and |t_8b| termcap
+entries are used.  These are set by default to values that work for most
+terminals.  If that does not work for your terminal you can set them manually.
+The default values are set like this: >
+	 let &t_8f = "\<Esc>[38;2;%lu;%lu;%lum"
+	 let &t_8b = "\<Esc>[48;2;%lu;%lu;%lum"
+
+Some terminals accept the same sequences, but with all semicolons replaced by
+colons (this is actually more compatible, but less widely supported): >
 	 let &t_8f = "\<Esc>[38:2:%lu:%lu:%lum"
 	 let &t_8b = "\<Esc>[48:2:%lu:%lu:%lum"
 
@@ -627,7 +659,7 @@
 To overrule the default, put this line in your ~/.Xdefaults or
 ~/.Xresources:
 >
-	XTerm*allowWindowOps: 		true
+	XTerm*allowWindowOps:		true
 
 And run "xrdb -merge .Xresources" to make it effective.  You can check the
 value with the context menu (right mouse button while CTRL key is pressed),
diff --git a/runtime/doc/testing.txt b/runtime/doc/testing.txt
index 089e61f..beef79d 100644
--- a/runtime/doc/testing.txt
+++ b/runtime/doc/testing.txt
@@ -1,4 +1,4 @@
-*testing.txt*	For Vim version 9.0.  Last change: 2022 Nov 28
+*testing.txt*	For Vim version 9.0.  Last change: 2022 Dec 30
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
diff --git a/runtime/doc/textprop.txt b/runtime/doc/textprop.txt
index 086742a..c6178c3 100644
--- a/runtime/doc/textprop.txt
+++ b/runtime/doc/textprop.txt
@@ -1,4 +1,4 @@
-*textprop.txt*  For Vim version 9.0.  Last change: 2022 Nov 18
+*textprop.txt*  For Vim version 9.0.  Last change: 2022 Dec 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -220,10 +220,16 @@
 		Any Tab and other control character in the text will be
 		changed to a space (Rationale: otherwise the size of the text
 		is difficult to compute).
-		A negative "id" will be chosen and is returned.  Once a
-		property with "text" has been added for a buffer then using a
-		negative "id" for any other property will give an error:
-		*E1293*
+		A negative "id" will be chosen and is returned.
+
+		Before text properties with text were supported it was
+		possible to use a negative "id", even though this was very
+		rare.  Now that negative "id"s are reserved for text
+		properties with text an error is given when using a negative
+		"id".  When a text property with text already exists using a
+		negative "id" results in *E1293* .  If a negative "id" was
+		used and later a text property with text is added results in
+		*E1339* .
 
 		Can also be used as a |method|: >
 			GetLnum()->prop_add(col, props)
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index 4474632..c7fefa6 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 9.0.  Last change: 2022 Dec 11
+*todo.txt*      For Vim version 9.0.  Last change: 2022 Dec 31
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -54,13 +54,19 @@
 
 Further Vim9 improvements, possibly after launch:
 - implement :class and :interface: See |vim9-classes|  #11544
-    make default constructor use "this.member = void"
-    make public / default read access / private work for members.
-    string value of class and object in echo_string_core()
-    object empty(), len() - can class define a method?
+    class members: add test for read/write access
+	Test for E1337
+    Should object members be declared with "var"?  Looks more normal.
+    Don't use "class method" in the help but use "class function", more people
+    are used to that.
+    implement class functions: static def Method()
+    Disallow shadowing class members, e.g. by function arguments.
     tv_equal() should compare values, not identity.
+    import/export of a class
+    using a class name as a type
     garbage collection: set_ref_in_item(): Mark items in class as used ?
     type() should return different type for each class?
+    object empty(), len() - can class define a method to be used for them?
     how about lock/unlock?
 - implement :type
 - implement :enum
@@ -70,6 +76,56 @@
     has(featureName), len(someString)
 - Implement as part of an expression: ++expr, --expr, expr++, expr--.
 
+Information missing in terminfo:
+Priority:
+- t_RV	request terminal version string; xterm:	"\033[>c"
+Codes used for focus gained and lost (currently using use_xterm_like_mouse())
+  termcodes are hard-coded in set_termname(), not named.
+- t_fe	enable focus-event tracking
+- t_fd	disable focus-event tracking
+Underline and similar:
+- t_AU - Set underline color: like "AF" and "AB" entries.
+- t_Ce	undercurl and underline end
+- t_Cs	undercurl (curly underline) mode
+- t_Us	double underline mode
+- t_ds	dotted underline mode
+- t_Ds	dashed underline mode
+- t_Te	strikethrough end
+- t_Ts	strikethrough mode
+Cursor codes: |termcap-cursor-shape|
+- t_RC	request terminal cursor blinking
+- t_RS	request terminal cursor style
+- t_VS	cursor normally visible (no blink)
+- t_SI	start insert mode (bar cursor shape)
+- t_SR	start replace mode (underline cursor shape)
+- t_EI	end insert or replace mode (block cursor shape)
+- t_SC	set cursor color start
+- t_EC	set cursor color end
+- t_SH	set cursor shape
+State requests:
+- t_RF	request terminal foreground color
+- t_RB	request terminal background color
+Less important (not needed for regular editing):
+- t_IS	set icon text start
+- t_IE	set icon text end
+- t_ST	save window title to stack
+- t_RT	restore window title from stack
+- t_Si	save icon text to stack
+- t_Ri	restore icon text from stack
+- t_WP	set window position (Y, X) in pixels
+- t_GP	get window position (Y, X) in pixels
+- t_WS	set window size (height, width in cells)
+Vim internal, but there should be a terminfo entry for these:
+- t_8f	set foreground color (R, G, B) in printf() format
+- t_8b	set background color (R, G, B) in printf() format
+- t_8u	set underline color (R, G, B) in printf() format
+Probably Vim internal, not in terminfo:
+- t_TE	end of "raw" mode
+- t_TI	put terminal into "raw" mode
+- t_RK	request terminal keyboard protocol state; sent after |t_TI|
+Already working, not properly documented:
+- t_u7	request cursor position
+
 Popup windows:
 - Add a function to redraw a specific popup window.  Esp. to be used when
   editing the command line, when screen updating doesn't happen. (Shougo)
@@ -177,6 +233,10 @@
 - When 'encoding' is not utf-8, or the job is using another encoding, setup
   conversions.
 
+Patch adds showcmd() function  #11708  - tests missing StopVimInTerminal()
+
+Some setaf/setab/t_AF/t_AB values support RGB somehow?  Can we use that?
+
 Crash when a variable is removed while listing variables (Issue #11435)
 
 Autoconf: must use autoconf 2.69, later version generates lots of warnings
@@ -212,6 +272,12 @@
 
 PR #11579 to add visualtext(), return Visually selected text.
 
+Stray characters in the shell #11719, caused by requesting a response for:
+- XT key sequences
+- Whether modifyOtherKeys is active
+- Whether kitty keyboard protocol is active
+Can we not request XT key sequences, or reduce them drastically?
+
 Issue #10512: Dynamic loading broken with Perl 5.36
 Damien has a patch (2022 Dec 4)
 
@@ -426,6 +492,10 @@
 Using "au!" after "filetype on" is a bit slow.  Can the matching of
 autocommands be made faster?  (#7056)
 
+Using a search pattern containing "\%V" and 'hlsearch' set keeps old matches
+when the Visual area changes.  #11694.  Do a redraw when starting a Visual
+selection?
+
 Append in Visual block mode inserts the wrong character.
 Test_visual_block_mode() already has the proper check, which is commented out.
 (#8288)
diff --git a/runtime/doc/usr_41.txt b/runtime/doc/usr_41.txt
index c67bd99..5597077 100644
--- a/runtime/doc/usr_41.txt
+++ b/runtime/doc/usr_41.txt
@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 9.0.  Last change: 2022 Dec 05
+*usr_41.txt*	For Vim version 9.0.  Last change: 2022 Dec 20
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
diff --git a/runtime/doc/various.txt b/runtime/doc/various.txt
index a88f318..a11e166 100644
--- a/runtime/doc/various.txt
+++ b/runtime/doc/various.txt
@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 9.0.  Last change: 2022 Nov 04
+*various.txt*   For Vim version 9.0.  Last change: 2022 Dec 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -496,7 +496,7 @@
 T  *+vreplace*		|gR| and |gr|
    *+vtp*		on MS-Windows console: support for 'termguicolors'
 T  *+wildignore*	|'wildignore'|  Always enabled since 9.0.0278
-T  *+wildmenu*		|'wildmenu'||  Always enabled since 9.0.0279
+T  *+wildmenu*		|'wildmenu'|  Always enabled since 9.0.0279
 T  *+windows*		more than one window; Always enabled since 8.0.1118.
 m  *+writebackup*	|'writebackup'| is default on
 m  *+xim*		X input method |xim|
diff --git a/runtime/doc/vim9class.txt b/runtime/doc/vim9class.txt
index 4dc84f3..cabe55b 100644
--- a/runtime/doc/vim9class.txt
+++ b/runtime/doc/vim9class.txt
@@ -1,4 +1,4 @@
-*vim9class.txt*	For Vim version 9.0.  Last change: 2022 Dec 11
+*vim9class.txt*	For Vim version 9.0.  Last change: 2022 Dec 20
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -117,7 +117,7 @@
 Now try to change an object member directly: >
 
 	pos.lnum = 9
-
+<								*E1335*
 This will give you an error!  That is because by default object members can be
 read but not set.  That's why the class provides a method for it: >
 
@@ -128,7 +128,7 @@
 have side effects that need to be taken care of.  In this case, the SetLnum()
 method could check if the line number is valid and either give an error or use
 the closest valid value.
-
+						*:public* *E1331*
 If you don't care about side effects and want to allow the object member to be
 changed at any time, you can make it public: >
 
@@ -137,10 +137,14 @@
 
 Now you don't need the SetLnum(), SetCol() and SetPosition() methods, setting
 "pos.lnum" directly above will no longer give an error.
+							*E1334*
+If you try to set an object member that doesn't exist you get an error: >
+	pos.other = 9
+<	E1334: Object member not found: other ~
 
 
 Private members ~
-
+							*E1332* *E1333*
 On the other hand, if you do not want the object members to be read directly,
 you can make them private.  This is done by prefixing an underscore to the
 name: >
@@ -245,7 +249,7 @@
 	   enddef
 	endclass
 <
-						*class-member* *:static*
+					*class-member* *:static* *E1337* *E1338*
 Class members are declared with "static".  They are used by the name without a
 prefix: >
 
@@ -389,6 +393,17 @@
   	def newName(arguments)
 - An object method: >
   	def SomeMethod(arguments)
+<							*E1329*
+For the object member the type must be specified.  The best way is to do this
+explicitly with ": {type}".  For simple types you can also use an initializer,
+such as "= 123", and Vim will see that the type is a number.  Avoid doing this
+for more complex types and when the type will be incomplete.  For example: >
+	this.nameList = []
+This specifies a list, but the item type is unknown.  Better use: >
+	this.nameList: list<string>
+The initialization isn't needed, the list is empty by default.
+							*E1330*
+Some types cannot be used, such as "void", "null" and "v:none".
 
 
 Defining an interface ~