diff --git a/runtime/doc/Makefile b/runtime/doc/Makefile
index 3db1190..4a1ea03 100644
--- a/runtime/doc/Makefile
+++ b/runtime/doc/Makefile
@@ -103,6 +103,7 @@
 	tagsrch.txt \
 	term.txt \
 	terminal.txt \
+	testing.txt \
 	textprop.txt \
 	tips.txt \
 	todo.txt \
@@ -241,6 +242,7 @@
 	tagsrch.html \
 	term.html \
 	terminal.html \
+	testing.html \
 	textprop.html \
 	tips.html \
 	todo.html \
diff --git a/runtime/doc/channel.txt b/runtime/doc/channel.txt
index 632628a..a8e5857 100644
--- a/runtime/doc/channel.txt
+++ b/runtime/doc/channel.txt
@@ -1,4 +1,4 @@
-*channel.txt*      For Vim version 8.1.  Last change: 2019 May 12
+*channel.txt*      For Vim version 8.1.  Last change: 2019 Jul 21
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -18,11 +18,13 @@
 5. Channel commands			|channel-commands|
 6. Using a RAW or NL channel		|channel-raw|
 7. More channel functions		|channel-more|
-8. Starting a job with a channel	|job-start|
-9. Starting a job without a channel	|job-start-nochannel|
-10. Job options				|job-options|
-11. Controlling a job			|job-control|
-12. Using a prompt buffer		|prompt-buffer|
+8. channel functions details		|channel-functions-details|
+9. Starting a job with a channel	|job-start|
+10. Starting a job without a channel	|job-start-nochannel|
+11. Job functions			|job-functions-details|
+12. Job options				|job-options|
+13. Controlling a job			|job-control|
+14. Using a prompt buffer		|prompt-buffer|
 
 {only when compiled with the |+channel| feature for channel stuff}
 	You can check this with: `has('channel')`
@@ -460,7 +462,211 @@
 This includes any sequence number.
 
 ==============================================================================
-8. Starting a job with a channel			*job-start* *job*
+8. channel functions details			*channel-functions-details*
+
+ch_canread({handle})						*ch_canread()*
+		Return non-zero when there is something to read from {handle}.
+		{handle} can be a Channel or a Job that has a Channel.
+
+		This is useful to read from a channel at a convenient time,
+		e.g. from a timer.
+
+		Note that messages are dropped when the channel does not have
+		a callback.  Add a close callback to avoid that.
+
+
+ch_close({handle})						*ch_close()*
+		Close {handle}.  See |channel-close|.
+		{handle} can be a Channel or a Job that has a Channel.
+		A close callback is not invoked.
+
+
+ch_close_in({handle})						*ch_close_in()*
+		Close the "in" part of {handle}.  See |channel-close-in|.
+		{handle} can be a Channel or a Job that has a Channel.
+		A close callback is not invoked.
+
+
+ch_evalexpr({handle}, {expr} [, {options}])			*ch_evalexpr()*
+		Send {expr} over {handle}.  The {expr} is encoded
+		according to the type of channel.  The function cannot be used
+		with a raw channel.  See |channel-use|.
+		{handle} can be a Channel or a Job that has a Channel.
+								*E917*
+		{options} must be a Dictionary.  It must not have a "callback"
+		entry.  It can have a "timeout" entry to specify the timeout
+		for this specific request.
+
+		ch_evalexpr() waits for a response and returns the decoded
+		expression.  When there is an error or timeout it returns an
+		empty string.
+
+
+ch_evalraw({handle}, {string} [, {options}])		*ch_evalraw()*
+		Send {string} over {handle}.
+		{handle} can be a Channel or a Job that has a Channel.
+
+		Works like |ch_evalexpr()|, but does not encode the request or
+		decode the response.  The caller is responsible for the
+		correct contents.  Also does not add a newline for a channel
+		in NL mode, the caller must do that.  The NL in the response
+		is removed.
+		Note that Vim does not know when the text received on a raw
+		channel is complete, it may only return the first part and you
+		need to use |ch_readraw()| to fetch the rest.
+		See |channel-use|.
+
+
+ch_getbufnr({handle}, {what})				 *ch_getbufnr()*
+		Get the buffer number that {handle} is using for {what}.
+		{handle} can be a Channel or a Job that has a Channel.
+		{what} can be "err" for stderr, "out" for stdout or empty for
+		socket output.
+		Returns -1 when there is no buffer.
+
+
+ch_getjob({channel})						*ch_getjob()*
+		Get the Job associated with {channel}.
+		If there is no job calling |job_status()| on the returned Job
+		will result in "fail".
+
+
+ch_info({handle})						*ch_info()*
+		Returns a Dictionary with information about {handle}.  The
+		items are:
+		   "id"		  number of the channel
+		   "status"	  "open", "buffered" or "closed", like
+				  ch_status()
+		When opened with ch_open():
+		   "hostname"	  the hostname of the address
+		   "port"	  the port of the address
+		   "sock_status"  "open" or "closed"
+		   "sock_mode"	  "NL", "RAW", "JSON" or "JS"
+		   "sock_io"	  "socket"
+		   "sock_timeout" timeout in msec
+		When opened with job_start():
+		   "out_status"	  "open", "buffered" or "closed"
+		   "out_mode"	  "NL", "RAW", "JSON" or "JS"
+		   "out_io"	  "null", "pipe", "file" or "buffer"
+		   "out_timeout"  timeout in msec
+		   "err_status"	  "open", "buffered" or "closed"
+		   "err_mode"	  "NL", "RAW", "JSON" or "JS"
+		   "err_io"	  "out", "null", "pipe", "file" or "buffer"
+		   "err_timeout"  timeout in msec
+		   "in_status"	  "open" or "closed"
+		   "in_mode"	  "NL", "RAW", "JSON" or "JS"
+		   "in_io"	  "null", "pipe", "file" or "buffer"
+		   "in_timeout"	  timeout in msec
+
+
+ch_log({msg} [, {handle}])					*ch_log()*
+		Write {msg} in the channel log file, if it was opened with
+		|ch_logfile()|.
+		When {handle} is passed the channel number is used for the
+		message.
+		{handle} can be a Channel or a Job that has a Channel.  The
+		Channel must be open for the channel number to be used.
+
+
+ch_logfile({fname} [, {mode}])					*ch_logfile()*
+		Start logging channel activity to {fname}.
+		When {fname} is an empty string: stop logging.
+
+		When {mode} is omitted or "a" append to the file.
+		When {mode} is "w" start with an empty file.
+
+		Use |ch_log()| to write log messages.  The file is flushed
+		after every message, on Unix you can use "tail -f" to see what
+		is going on in real time.
+
+		This function is not available in the |sandbox|.
+		NOTE: the channel communication is stored in the file, be
+		aware that this may contain confidential and privacy sensitive
+		information, e.g. a password you type in a terminal window.
+
+
+ch_open({address} [, {options}])				*ch_open()*
+		Open a channel to {address}.  See |channel|.
+		Returns a Channel.  Use |ch_status()| to check for failure.
+
+		{address} has the form "hostname:port", e.g.,
+		"localhost:8765".
+
+		If {options} is given it must be a |Dictionary|.
+		See |channel-open-options|.
+
+
+ch_read({handle} [, {options}])					*ch_read()*
+		Read from {handle} and return the received message.
+		{handle} can be a Channel or a Job that has a Channel.
+		For a NL channel this waits for a NL to arrive, except when
+		there is nothing more to read (channel was closed).
+		See |channel-more|.
+
+
+ch_readblob({handle} [, {options}])			*ch_readblob()*
+		Like ch_read() but reads binary data and returns a |Blob|.
+		See |channel-more|.
+
+
+ch_readraw({handle} [, {options}])			*ch_readraw()*
+		Like ch_read() but for a JS and JSON channel does not decode
+		the message.  For a NL channel it does not block waiting for
+		the NL to arrive, but otherwise works like ch_read().
+		See |channel-more|.
+
+
+ch_sendexpr({handle}, {expr} [, {options}])			*ch_sendexpr()*
+		Send {expr} over {handle}.  The {expr} is encoded
+		according to the type of channel.  The function cannot be used
+		with a raw channel.
+		See |channel-use|.				*E912*
+		{handle} can be a Channel or a Job that has a Channel.
+
+
+ch_sendraw({handle}, {expr} [, {options}])		*ch_sendraw()*
+		Send |String| or |Blob| {expr} over {handle}.
+		Works like |ch_sendexpr()|, but does not encode the request or
+		decode the response.  The caller is responsible for the
+		correct contents.  Also does not add a newline for a channel
+		in NL mode, the caller must do that.  The NL in the response
+		is removed.
+		See |channel-use|.
+
+
+ch_setoptions({handle}, {options})			*ch_setoptions()*
+		Set options on {handle}:
+			"callback"	the channel callback
+			"timeout"	default read timeout in msec
+			"mode"		mode for the whole channel
+		See |ch_open()| for more explanation.
+		{handle} can be a Channel or a Job that has a Channel.
+
+		Note that changing the mode may cause queued messages to be
+		lost.
+
+		These options cannot be changed:
+			"waittime"	only applies to |ch_open()|
+
+
+ch_status({handle} [, {options}])				*ch_status()*
+		Return the status of {handle}:
+			"fail"		failed to open the channel
+			"open"		channel can be used
+			"buffered"	channel can be read, not written to
+			"closed"	channel can not be used
+		{handle} can be a Channel or a Job that has a Channel.
+		"buffered" is used when the channel was closed but there is
+		still data that can be obtained with |ch_read()|.
+
+		If {options} is given it can contain a "part" entry to specify
+		the part of the channel to return the status for: "out" or
+		"err".  For example, to get the error status: >
+			ch_status(job, {"part": "err"})
+<
+
+==============================================================================
+9. Starting a job with a channel			*job-start* *job*
 
 To start a job and open a channel for stdin/stdout/stderr: >
     let job = job_start(command, {options})
@@ -552,7 +758,7 @@
 You will want to do something more useful than "echomsg".
 
 ==============================================================================
-9. Starting a job without a channel			*job-start-nochannel*
+10. Starting a job without a channel			*job-start-nochannel*
 
 To start another process without creating a channel: >
     let job = job_start(command,
@@ -579,7 +785,164 @@
 available.
 
 ==============================================================================
-10. Job options						*job-options*
+11. Job functions					*job-functions-details*
+
+job_getchannel({job})					 *job_getchannel()*
+		Get the channel handle that {job} is using.
+		To check if the job has no channel: >
+			if string(job_getchannel()) == 'channel fail'
+<
+
+job_info([{job}])					*job_info()*
+		Returns a Dictionary with information about {job}:
+		   "status"	what |job_status()| returns
+		   "channel"	what |job_getchannel()| returns
+		   "cmd"	List of command arguments used to start the job
+		   "process"	process ID
+		   "tty_in"	terminal input name, empty when none
+		   "tty_out"	terminal output name, empty when none
+		   "exitval"	only valid when "status" is "dead"
+		   "exit_cb"	function to be called on exit
+		   "stoponexit"	|job-stoponexit|
+
+		   Only in Unix:
+		   "termsig"	the signal which terminated the process
+				(See |job_stop()| for the values)
+				only valid when "status" is "dead"
+
+		   Only in MS-Windows:
+		   "tty_type"	Type of virtual console in use.
+				Values are "winpty" or "conpty".
+				See 'termwintype'.
+
+		Without any arguments, returns a List with all Job objects.
+
+
+job_setoptions({job}, {options})			*job_setoptions()*
+		Change options for {job}.  Supported are:
+		   "stoponexit"	|job-stoponexit|
+		   "exit_cb"	|job-exit_cb|
+
+
+job_start({command} [, {options}])			*job_start()*
+		Start a job and return a Job object.  Unlike |system()| and
+		|:!cmd| this does not wait for the job to finish.
+		To start a job in a terminal window see |term_start()|.
+
+		If the job fails to start then |job_status()| on the returned
+		Job object results in "fail" and none of the callbacks will be
+		invoked.
+
+		{command} can be a String.  This works best on MS-Windows.  On
+		Unix it is split up in white-separated parts to be passed to
+		execvp().  Arguments in double quotes can contain white space.
+
+		{command} can be a List, where the first item is the executable
+		and further items are the arguments.  All items are converted
+		to String.  This works best on Unix.
+
+		On MS-Windows, job_start() makes a GUI application hidden. If
+		want to show it, Use |:!start| instead.
+
+		The command is executed directly, not through a shell, the
+		'shell' option is not used.  To use the shell: >
+	let job = job_start(["/bin/sh", "-c", "echo hello"])
+<		Or: >
+	let job = job_start('/bin/sh -c "echo hello"')
+<		Note that this will start two processes, the shell and the
+		command it executes.  If you don't want this use the "exec"
+		shell command.
+
+		On Unix $PATH is used to search for the executable only when
+		the command does not contain a slash.
+
+		The job will use the same terminal as Vim.  If it reads from
+		stdin the job and Vim will be fighting over input, that
+		doesn't work.  Redirect stdin and stdout to avoid problems: >
+	let job = job_start(['sh', '-c', "myserver </dev/null >/dev/null"])
+<
+		The returned Job object can be used to get the status with
+		|job_status()| and stop the job with |job_stop()|.
+
+		Note that the job object will be deleted if there are no
+		references to it.  This closes the stdin and stderr, which may
+		cause the job to fail with an error.  To avoid this keep a
+		reference to the job.  Thus instead of: >
+	call job_start('my-command')
+<		use: >
+	let myjob = job_start('my-command')
+<		and unlet "myjob" once the job is not needed or is past the
+		point where it would fail (e.g. when it prints a message on
+		startup).  Keep in mind that variables local to a function
+		will cease to exist if the function returns.  Use a
+		script-local variable if needed: >
+	let s:myjob = job_start('my-command')
+<
+		{options} must be a Dictionary.  It can contain many optional
+		items, see |job-options|.
+
+
+job_status({job})					*job_status()* *E916*
+		Returns a String with the status of {job}:
+			"run"	job is running
+			"fail"	job failed to start
+			"dead"	job died or was stopped after running
+
+		On Unix a non-existing command results in "dead" instead of
+		"fail", because a fork happens before the failure can be
+		detected.
+
+		If an exit callback was set with the "exit_cb" option and the
+		job is now detected to be "dead" the callback will be invoked.
+
+		For more information see |job_info()|.
+
+
+job_stop({job} [, {how}])					*job_stop()*
+		Stop the {job}.  This can also be used to signal the job.
+
+		When {how} is omitted or is "term" the job will be terminated.
+		For Unix SIGTERM is sent.  On MS-Windows the job will be
+		terminated forcedly (there is no "gentle" way).
+		This goes to the process group, thus children may also be
+		affected.
+
+		Effect for Unix:
+			"term"	 SIGTERM (default)
+			"hup"	 SIGHUP
+			"quit"	 SIGQUIT
+			"int"	 SIGINT
+			"kill"	 SIGKILL (strongest way to stop)
+			number	 signal with that number
+
+		Effect for MS-Windows:
+			"term"	 terminate process forcedly (default)
+			"hup"	 CTRL_BREAK
+			"quit"	 CTRL_BREAK
+			"int"	 CTRL_C
+			"kill"	 terminate process forcedly
+			Others	 CTRL_BREAK
+
+		On Unix the signal is sent to the process group.  This means
+		that when the job is "sh -c command" it affects both the shell
+		and the command.
+
+		The result is a Number: 1 if the operation could be executed,
+		0 if "how" is not supported on the system.
+		Note that even when the operation was executed, whether the
+		job was actually stopped needs to be checked with
+		|job_status()|.
+
+		If the status of the job is "dead", the signal will not be
+		sent.  This is to avoid to stop the wrong job (esp. on Unix,
+		where process numbers are recycled).
+
+		When using "kill" Vim will assume the job will die and close
+		the channel.
+
+
+==============================================================================
+12. Job options						*job-options*
 
 The {options} argument in job_start() is a dictionary.  All entries are
 optional.  Some options can be used after the job has started, using
@@ -773,7 +1136,7 @@
 If the file already exists it is truncated.
 
 ==============================================================================
-11. Controlling a job					*job-control*
+13. Controlling a job					*job-control*
 
 To get the status of a job: >
 	echo job_status(job)
@@ -789,7 +1152,7 @@
 For more options see |job_stop()|.
 
 ==============================================================================
-12. Using a prompt buffer				*prompt-buffer*
+14. Using a prompt buffer				*prompt-buffer*
 
 If you want to type input for the job in a Vim window you have a few options:
 - Use a normal buffer and handle all possible commands yourself.
diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt
index 6a44c9f..79c5409 100644
--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 8.1.  Last change: 2019 Jul 19
+*eval.txt*	For Vim version 8.1.  Last change: 2019 Jul 21
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -31,7 +31,9 @@
 11. No +eval feature		|no-eval-feature|
 12. The sandbox			|eval-sandbox|
 13. Textlock			|textlock|
-14. Testing			|testing|
+
+Testing support is documented in |testing.txt|.
+Profiling is documented at |profiling|.
 
 ==============================================================================
 1. Variables						*variables*
@@ -2952,117 +2954,9 @@
 
 		The {winid} argument specifies the window ID, see |argc()|.
 
-assert_beeps({cmd})					*assert_beeps()*
-		Run {cmd} and add an error message to |v:errors| if it does
-		NOT produce a beep or visual bell.
-		Also see |assert_fails()| and |assert-return|.
 
-							*assert_equal()*
-assert_equal({expected}, {actual} [, {msg}])
-		When {expected} and {actual} are not equal an error message is
-		added to |v:errors| and 1 is returned.  Otherwise zero is
-		returned |assert-return|.
-		There is no automatic conversion, the String "4" is different
-		from the Number 4.  And the number 4 is different from the
-		Float 4.0.  The value of 'ignorecase' is not used here, case
-		always matters.
-		When {msg} is omitted an error in the form "Expected
-		{expected} but got {actual}" is produced.
-		Example: >
-	assert_equal('foo', 'bar')
-<		Will result in a string to be added to |v:errors|:
-	test.vim line 12: Expected 'foo' but got 'bar' ~
+assert_ functions are documented here: |assert-functions|
 
-							*assert_equalfile()*
-assert_equalfile({fname-one}, {fname-two})
-		When the files {fname-one} and {fname-two} do not contain
-		exactly the same text an error message is added to |v:errors|.
-		Also see |assert-return|.
-		When {fname-one} or {fname-two} does not exist the error will
-		mention that.
-		Mainly useful with |terminal-diff|.
-
-assert_exception({error} [, {msg}])			*assert_exception()*
-		When v:exception does not contain the string {error} an error
-		message is added to |v:errors|.  Also see |assert-return|.
-		This can be used to assert that a command throws an exception.
-		Using the error number, followed by a colon, avoids problems
-		with translations: >
-			try
-			  commandthatfails
-			  call assert_false(1, 'command should have failed')
-			catch
-			  call assert_exception('E492:')
-			endtry
-
-assert_fails({cmd} [, {error} [, {msg}]])			*assert_fails()*
-		Run {cmd} and add an error message to |v:errors| if it does
-		NOT produce an error.  Also see |assert-return|.
-		When {error} is given it must match in |v:errmsg|.
-		Note that beeping is not considered an error, and some failing
-		commands only beep.  Use |assert_beeps()| for those.
-
-assert_false({actual} [, {msg}])				*assert_false()*
-		When {actual} is not false an error message is added to
-		|v:errors|, like with |assert_equal()|.
-		Also see |assert-return|.
-		A value is false when it is zero. When {actual} is not a
-		number the assert fails.
-		When {msg} is omitted an error in the form
-		"Expected False but got {actual}" is produced.
-
-assert_inrange({lower}, {upper}, {actual} [, {msg}])	 *assert_inrange()*
-		This asserts number and |Float| values.  When {actual}  is lower
-		than {lower} or higher than {upper} an error message is added
-		to |v:errors|.  Also see |assert-return|.
-		When {msg} is omitted an error in the form
-		"Expected range {lower} - {upper}, but got {actual}" is
-		produced.
-
-								*assert_match()*
-assert_match({pattern}, {actual} [, {msg}])
-		When {pattern} does not match {actual} an error message is
-		added to |v:errors|.  Also see |assert-return|.
-
-		{pattern} is used as with |=~|: The matching is always done
-		like 'magic' was set and 'cpoptions' is empty, no matter what
-		the actual value of 'magic' or 'cpoptions' is.
-
-		{actual} is used as a string, automatic conversion applies.
-		Use "^" and "$" to match with the start and end of the text.
-		Use both to match the whole text.
-
-		When {msg} is omitted an error in the form
-		"Pattern {pattern} does not match {actual}" is produced.
-		Example: >
-	assert_match('^f.*o$', 'foobar')
-<		Will result in a string to be added to |v:errors|:
-	test.vim line 12: Pattern '^f.*o$' does not match 'foobar' ~
-
-							*assert_notequal()*
-assert_notequal({expected}, {actual} [, {msg}])
-		The opposite of `assert_equal()`: add an error message to
-		|v:errors| when {expected} and {actual} are equal.
-		Also see |assert-return|.
-
-							*assert_notmatch()*
-assert_notmatch({pattern}, {actual} [, {msg}])
-		The opposite of `assert_match()`: add an error message to
-		|v:errors| when {pattern} matches {actual}.
-		Also see |assert-return|.
-
-assert_report({msg})					*assert_report()*
-		Report a test failure directly, using {msg}.
-		Always returns one.
-
-assert_true({actual} [, {msg}])				*assert_true()*
-		When {actual} is not true an error message is added to
-		|v:errors|, like with |assert_equal()|.
-		Also see |assert-return|.
-		A value is TRUE when it is a non-zero number.  When {actual}
-		is not a number the assert fails.
-		When {msg} is omitted an error in the form "Expected True but
-		got {actual}" is produced.
 
 asin({expr})						*asin()*
 		Return the arc sine of {expr} measured in radians, as a |Float|
@@ -3358,213 +3252,10 @@
 <			4.0
 		{only available when compiled with the |+float| feature}
 
-ch_canread({handle})						*ch_canread()*
-		Return non-zero when there is something to read from {handle}.
-		{handle} can be a Channel or a Job that has a Channel.
 
-		This is useful to read from a channel at a convenient time,
-		e.g. from a timer.
-
-		Note that messages are dropped when the channel does not have
-		a callback.  Add a close callback to avoid that.
-
-		{only available when compiled with the |+channel| feature}
-
-ch_close({handle})						*ch_close()*
-		Close {handle}.  See |channel-close|.
-		{handle} can be a Channel or a Job that has a Channel.
-		A close callback is not invoked.
-
-		{only available when compiled with the |+channel| feature}
-
-ch_close_in({handle})						*ch_close_in()*
-		Close the "in" part of {handle}.  See |channel-close-in|.
-		{handle} can be a Channel or a Job that has a Channel.
-		A close callback is not invoked.
-
-		{only available when compiled with the |+channel| feature}
-
-ch_evalexpr({handle}, {expr} [, {options}])			*ch_evalexpr()*
-		Send {expr} over {handle}.  The {expr} is encoded
-		according to the type of channel.  The function cannot be used
-		with a raw channel.  See |channel-use|.
-		{handle} can be a Channel or a Job that has a Channel.
-								*E917*
-		{options} must be a Dictionary.  It must not have a "callback"
-		entry.  It can have a "timeout" entry to specify the timeout
-		for this specific request.
-
-		ch_evalexpr() waits for a response and returns the decoded
-		expression.  When there is an error or timeout it returns an
-		empty string.
-
-		{only available when compiled with the |+channel| feature}
-
-ch_evalraw({handle}, {string} [, {options}])		*ch_evalraw()*
-		Send {string} over {handle}.
-		{handle} can be a Channel or a Job that has a Channel.
-
-		Works like |ch_evalexpr()|, but does not encode the request or
-		decode the response.  The caller is responsible for the
-		correct contents.  Also does not add a newline for a channel
-		in NL mode, the caller must do that.  The NL in the response
-		is removed.
-		Note that Vim does not know when the text received on a raw
-		channel is complete, it may only return the first part and you
-		need to use |ch_readraw()| to fetch the rest.
-		See |channel-use|.
-
-		{only available when compiled with the |+channel| feature}
-
-ch_getbufnr({handle}, {what})				 *ch_getbufnr()*
-		Get the buffer number that {handle} is using for {what}.
-		{handle} can be a Channel or a Job that has a Channel.
-		{what} can be "err" for stderr, "out" for stdout or empty for
-		socket output.
-		Returns -1 when there is no buffer.
-		{only available when compiled with the |+channel| feature}
-
-ch_getjob({channel})						*ch_getjob()*
-		Get the Job associated with {channel}.
-		If there is no job calling |job_status()| on the returned Job
-		will result in "fail".
-
-		{only available when compiled with the |+channel| and
-		|+job| features}
-
-ch_info({handle})						*ch_info()*
-		Returns a Dictionary with information about {handle}.  The
-		items are:
-		   "id"		  number of the channel
-		   "status"	  "open", "buffered" or "closed", like
-				  ch_status()
-		When opened with ch_open():
-		   "hostname"	  the hostname of the address
-		   "port"	  the port of the address
-		   "sock_status"  "open" or "closed"
-		   "sock_mode"	  "NL", "RAW", "JSON" or "JS"
-		   "sock_io"	  "socket"
-		   "sock_timeout" timeout in msec
-		When opened with job_start():
-		   "out_status"	  "open", "buffered" or "closed"
-		   "out_mode"	  "NL", "RAW", "JSON" or "JS"
-		   "out_io"	  "null", "pipe", "file" or "buffer"
-		   "out_timeout"  timeout in msec
-		   "err_status"	  "open", "buffered" or "closed"
-		   "err_mode"	  "NL", "RAW", "JSON" or "JS"
-		   "err_io"	  "out", "null", "pipe", "file" or "buffer"
-		   "err_timeout"  timeout in msec
-		   "in_status"	  "open" or "closed"
-		   "in_mode"	  "NL", "RAW", "JSON" or "JS"
-		   "in_io"	  "null", "pipe", "file" or "buffer"
-		   "in_timeout"	  timeout in msec
-
-ch_log({msg} [, {handle}])					*ch_log()*
-		Write {msg} in the channel log file, if it was opened with
-		|ch_logfile()|.
-		When {handle} is passed the channel number is used for the
-		message.
-		{handle} can be a Channel or a Job that has a Channel.  The
-		Channel must be open for the channel number to be used.
-
-ch_logfile({fname} [, {mode}])					*ch_logfile()*
-		Start logging channel activity to {fname}.
-		When {fname} is an empty string: stop logging.
-
-		When {mode} is omitted or "a" append to the file.
-		When {mode} is "w" start with an empty file.
-
-		Use |ch_log()| to write log messages.  The file is flushed
-		after every message, on Unix you can use "tail -f" to see what
-		is going on in real time.
-
-		This function is not available in the |sandbox|.
-		NOTE: the channel communication is stored in the file, be
-		aware that this may contain confidential and privacy sensitive
-		information, e.g. a password you type in a terminal window.
+ch_ functions are documented here: |channel-functions-details|
 
 
-ch_open({address} [, {options}])				*ch_open()*
-		Open a channel to {address}.  See |channel|.
-		Returns a Channel.  Use |ch_status()| to check for failure.
-
-		{address} has the form "hostname:port", e.g.,
-		"localhost:8765".
-
-		If {options} is given it must be a |Dictionary|.
-		See |channel-open-options|.
-
-		{only available when compiled with the |+channel| feature}
-
-ch_read({handle} [, {options}])					*ch_read()*
-		Read from {handle} and return the received message.
-		{handle} can be a Channel or a Job that has a Channel.
-		For a NL channel this waits for a NL to arrive, except when
-		there is nothing more to read (channel was closed).
-		See |channel-more|.
-		{only available when compiled with the |+channel| feature}
-
-ch_readblob({handle} [, {options}])			*ch_readblob()*
-		Like ch_read() but reads binary data and returns a |Blob|.
-		See |channel-more|.
-		{only available when compiled with the |+channel| feature}
-
-ch_readraw({handle} [, {options}])			*ch_readraw()*
-		Like ch_read() but for a JS and JSON channel does not decode
-		the message.  For a NL channel it does not block waiting for
-		the NL to arrive, but otherwise works like ch_read().
-		See |channel-more|.
-		{only available when compiled with the |+channel| feature}
-
-ch_sendexpr({handle}, {expr} [, {options}])			*ch_sendexpr()*
-		Send {expr} over {handle}.  The {expr} is encoded
-		according to the type of channel.  The function cannot be used
-		with a raw channel.
-		See |channel-use|.				*E912*
-		{handle} can be a Channel or a Job that has a Channel.
-
-		{only available when compiled with the |+channel| feature}
-
-ch_sendraw({handle}, {expr} [, {options}])		*ch_sendraw()*
-		Send |String| or |Blob| {expr} over {handle}.
-		Works like |ch_sendexpr()|, but does not encode the request or
-		decode the response.  The caller is responsible for the
-		correct contents.  Also does not add a newline for a channel
-		in NL mode, the caller must do that.  The NL in the response
-		is removed.
-		See |channel-use|.
-
-		{only available when compiled with the |+channel| feature}
-
-ch_setoptions({handle}, {options})			*ch_setoptions()*
-		Set options on {handle}:
-			"callback"	the channel callback
-			"timeout"	default read timeout in msec
-			"mode"		mode for the whole channel
-		See |ch_open()| for more explanation.
-		{handle} can be a Channel or a Job that has a Channel.
-
-		Note that changing the mode may cause queued messages to be
-		lost.
-
-		These options cannot be changed:
-			"waittime"	only applies to |ch_open()|
-
-ch_status({handle} [, {options}])				*ch_status()*
-		Return the status of {handle}:
-			"fail"		failed to open the channel
-			"open"		channel can be used
-			"buffered"	channel can be read, not written to
-			"closed"	channel can not be used
-		{handle} can be a Channel or a Job that has a Channel.
-		"buffered" is used when the channel was closed but there is
-		still data that can be obtained with |ch_read()|.
-
-		If {options} is given it can contain a "part" entry to specify
-		the part of the channel to return the status for: "out" or
-		"err".  For example, to get the error status: >
-			ch_status(job, {"part": "err"})
-<
 changenr()						*changenr()*
 		Return the number of the most recent change.  This is the same
 		number as what is displayed with |:undolist| and can be used
@@ -6044,161 +5735,9 @@
 			   echo key . ': ' . value
 			endfor
 
-job_getchannel({job})					 *job_getchannel()*
-		Get the channel handle that {job} is using.
-		To check if the job has no channel: >
-			if string(job_getchannel()) == 'channel fail'
-<
-		{only available when compiled with the |+job| feature}
 
-job_info([{job}])					*job_info()*
-		Returns a Dictionary with information about {job}:
-		   "status"	what |job_status()| returns
-		   "channel"	what |job_getchannel()| returns
-		   "cmd"	List of command arguments used to start the job
-		   "process"	process ID
-		   "tty_in"	terminal input name, empty when none
-		   "tty_out"	terminal output name, empty when none
-		   "exitval"	only valid when "status" is "dead"
-		   "exit_cb"	function to be called on exit
-		   "stoponexit"	|job-stoponexit|
+job_ functions are documented here: |job-functions-details|
 
-		   Only in Unix:
-		   "termsig"	the signal which terminated the process
-				(See |job_stop()| for the values)
-				only valid when "status" is "dead"
-
-		   Only in MS-Windows:
-		   "tty_type"	Type of virtual console in use.
-				Values are "winpty" or "conpty".
-				See 'termwintype'.
-
-		Without any arguments, returns a List with all Job objects.
-
-job_setoptions({job}, {options})			*job_setoptions()*
-		Change options for {job}.  Supported are:
-		   "stoponexit"	|job-stoponexit|
-		   "exit_cb"	|job-exit_cb|
-
-job_start({command} [, {options}])			*job_start()*
-		Start a job and return a Job object.  Unlike |system()| and
-		|:!cmd| this does not wait for the job to finish.
-		To start a job in a terminal window see |term_start()|.
-
-		If the job fails to start then |job_status()| on the returned
-		Job object results in "fail" and none of the callbacks will be
-		invoked.
-
-		{command} can be a String.  This works best on MS-Windows.  On
-		Unix it is split up in white-separated parts to be passed to
-		execvp().  Arguments in double quotes can contain white space.
-
-		{command} can be a List, where the first item is the executable
-		and further items are the arguments.  All items are converted
-		to String.  This works best on Unix.
-
-		On MS-Windows, job_start() makes a GUI application hidden. If
-		want to show it, Use |:!start| instead.
-
-		The command is executed directly, not through a shell, the
-		'shell' option is not used.  To use the shell: >
-	let job = job_start(["/bin/sh", "-c", "echo hello"])
-<		Or: >
-	let job = job_start('/bin/sh -c "echo hello"')
-<		Note that this will start two processes, the shell and the
-		command it executes.  If you don't want this use the "exec"
-		shell command.
-
-		On Unix $PATH is used to search for the executable only when
-		the command does not contain a slash.
-
-		The job will use the same terminal as Vim.  If it reads from
-		stdin the job and Vim will be fighting over input, that
-		doesn't work.  Redirect stdin and stdout to avoid problems: >
-	let job = job_start(['sh', '-c', "myserver </dev/null >/dev/null"])
-<
-		The returned Job object can be used to get the status with
-		|job_status()| and stop the job with |job_stop()|.
-
-		Note that the job object will be deleted if there are no
-		references to it.  This closes the stdin and stderr, which may
-		cause the job to fail with an error.  To avoid this keep a
-		reference to the job.  Thus instead of: >
-	call job_start('my-command')
-<		use: >
-	let myjob = job_start('my-command')
-<		and unlet "myjob" once the job is not needed or is past the
-		point where it would fail (e.g. when it prints a message on
-		startup).  Keep in mind that variables local to a function
-		will cease to exist if the function returns.  Use a
-		script-local variable if needed: >
-	let s:myjob = job_start('my-command')
-<
-		{options} must be a Dictionary.  It can contain many optional
-		items, see |job-options|.
-
-		{only available when compiled with the |+job| feature}
-
-job_status({job})					*job_status()* *E916*
-		Returns a String with the status of {job}:
-			"run"	job is running
-			"fail"	job failed to start
-			"dead"	job died or was stopped after running
-
-		On Unix a non-existing command results in "dead" instead of
-		"fail", because a fork happens before the failure can be
-		detected.
-
-		If an exit callback was set with the "exit_cb" option and the
-		job is now detected to be "dead" the callback will be invoked.
-
-		For more information see |job_info()|.
-
-		{only available when compiled with the |+job| feature}
-
-job_stop({job} [, {how}])					*job_stop()*
-		Stop the {job}.  This can also be used to signal the job.
-
-		When {how} is omitted or is "term" the job will be terminated.
-		For Unix SIGTERM is sent.  On MS-Windows the job will be
-		terminated forcedly (there is no "gentle" way).
-		This goes to the process group, thus children may also be
-		affected.
-
-		Effect for Unix:
-			"term"	 SIGTERM (default)
-			"hup"	 SIGHUP
-			"quit"	 SIGQUIT
-			"int"	 SIGINT
-			"kill"	 SIGKILL (strongest way to stop)
-			number	 signal with that number
-
-		Effect for MS-Windows:
-			"term"	 terminate process forcedly (default)
-			"hup"	 CTRL_BREAK
-			"quit"	 CTRL_BREAK
-			"int"	 CTRL_C
-			"kill"	 terminate process forcedly
-			Others	 CTRL_BREAK
-
-		On Unix the signal is sent to the process group.  This means
-		that when the job is "sh -c command" it affects both the shell
-		and the command.
-
-		The result is a Number: 1 if the operation could be executed,
-		0 if "how" is not supported on the system.
-		Note that even when the operation was executed, whether the
-		job was actually stopped needs to be checked with
-		|job_status()|.
-
-		If the status of the job is "dead", the signal will not be
-		sent.  This is to avoid to stop the wrong job (esp. on Unix,
-		where process numbers are recycled).
-
-		When using "kill" Vim will assume the job will die and close
-		the channel.
-
-		{only available when compiled with the |+job| feature}
 
 join({list} [, {sep}])					*join()*
 		Join the items in {list} together into one String.
@@ -7333,201 +6872,7 @@
 		"prompt".  Example: >
 			call prompt_setprompt(bufnr(''), 'command: ')
 <
-						*prop_add()* *E965*
-prop_add({lnum}, {col}, {props})
-		Attach a text property at position {lnum}, {col}.  {col} is
-		counted in bytes, use one for the first column.
-		If {lnum} is invalid an error is given. *E966*
-		If {col} is invalid an error is given. *E964*
-
-		{props} is a dictionary with these fields:
-		   length	length of text in bytes, can only be used
-				for a property that does not continue in
-				another line; can be zero
-		   end_lnum	line number for the end of text
-		   end_col	column just after the text; not used when
-				"length" is present; when {col} and "end_col"
-				are equal, and "end_lnum" is omitted or equal
-				to {lnum}, this is a zero-width text property
-		   bufnr	buffer to add the property to; when omitted
-				the current buffer is used
-		   id		user defined ID for the property; when omitted
-				zero is used
-		   type		name of the text property type
-		All fields except "type" are optional.
-
-		It is an error when both "length" and "end_lnum" or "end_col"
-		are given.  Either use "length" or "end_col" for a property
-		within one line, or use "end_lnum" and "end_col" for a
-		property that spans more than one line.
-		When neither "length" nor "end_col" are given the property
-		will be zero-width.  That means it will not be highlighted but
-		will move with the text, as a kind of mark.
-		The property can end exactly at the last character of the
-		text, or just after it.  In the last case, if text is appended
-		to the line, the text property size will increase, also when
-		the property type does not have "end_incl" set.
-
-		"type" will first be looked up in the buffer the property is
-		added to. When not found, the global property types are used.
-		If not found an error is given.
-
-		See |text-properties| for information about text properties.
-
-
-prop_clear({lnum} [, {lnum-end} [, {props}]])		*prop_clear()*
-		Remove all text properties from line {lnum}.
-		When {lnum-end} is given, remove all text properties from line
-		{lnum} to {lnum-end} (inclusive).
-
-		When {props} contains a "bufnr" item use this buffer,
-		otherwise use the current buffer.
-
-		See |text-properties| for information about text properties.
-
-							*prop_find()*
-prop_find({props} [, {direction}])
-		NOT IMPLEMENTED YET
-		Search for a text property as specified with {props}:
-		   id		property with this ID
-		   type		property with this type name
-		   bufnr	buffer to search in; when present a
-				start position with "lnum" and "col"
-				must be given; when omitted the
-				current buffer is used
-		   lnum		start in this line (when omitted start
-				at the cursor)
-		   col		start at this column (when omitted
-				and "lnum" is given: use column 1,
-				otherwise start at the cursor)
-		   skipstart	do not look for a match at the start
-				position
-
-		{direction} can be "f" for forward and "b" for backward.  When
-		omitted forward search is performed.
-
-		If a match is found then a Dict is returned with the entries
-		as with prop_list(), and additionally an "lnum" entry.
-		If no match is found then an empty Dict is returned.
-
-		See |text-properties| for information about text properties.
-
-
-prop_list({lnum} [, {props}])				*prop_list()*
-		Return a List with all text properties in line {lnum}.
-
-		When {props} contains a "bufnr" item, use this buffer instead
-		of the current buffer.
-
-		The properties are ordered by starting column and priority.
-		Each property is a Dict with these entries:
-		   col		starting column
-		   length	length in bytes, one more if line break is
-				included
-		   id		property ID
-		   type		name of the property type, omitted if
-				the type was deleted
-		   start	when TRUE property starts in this line
-		   end		when TRUE property ends in this line
-
-		When "start" is zero the property started in a previous line,
-		the current one is a continuation.
-		When "end" is zero the property continues in the next line.
-		The line break after this line is included.
-
-		See |text-properties| for information about text properties.
-
-
-						*prop_remove()* *E968*
-prop_remove({props} [, {lnum} [, {lnum-end}]])
-		Remove a matching text property from line {lnum}.  When
-		{lnum-end} is given, remove matching text properties from line
-		{lnum} to {lnum-end} (inclusive).
-		When {lnum} is omitted remove matching text properties from
-		all lines.
-
-		{props} is a dictionary with these fields:
-		   id		remove text properties with this ID
-		   type		remove text properties with this type name
-		   bufnr	use this buffer instead of the current one
-		   all		when TRUE remove all matching text properties,
-				not just the first one
-		A property matches when either "id" or "type" matches.
-		If buffer "bufnr" does not exist you get an error message.
-		If buffer "bufnr" is not loaded then nothing happens.
-
-		Returns the number of properties that were removed.
-
-		See |text-properties| for information about text properties.
-
-
-prop_type_add({name}, {props})		*prop_type_add()* *E969* *E970*
-		Add a text property type {name}.  If a property type with this
-		name already exists an error is given.
-		{props} is a dictionary with these optional fields:
-		   bufnr	define the property only for this buffer; this
-				avoids name collisions and automatically
-				clears the property types when the buffer is
-				deleted.
-		   highlight	name of highlight group to use
-		   priority	when a character has multiple text
-				properties the one with the highest priority
-				will be used; negative values can be used, the
-				default priority is zero
-		   combine	when TRUE combine the highlight with any
-				syntax highlight; when omitted or FALSE syntax
-				highlight will not be used
-		   start_incl	when TRUE inserts at the start position will
-				be included in the text property
-		   end_incl	when TRUE inserts at the end position will be
-				included in the text property
-
-		See |text-properties| for information about text properties.
-
-
-prop_type_change({name}, {props})			*prop_type_change()*
-		Change properties of an existing text property type.  If a
-		property with this name does not exist an error is given.
-		The {props} argument is just like |prop_type_add()|.
-
-		See |text-properties| for information about text properties.
-
-
-prop_type_delete({name} [, {props}])			*prop_type_delete()*
-		Remove the text property type {name}.  When text properties
-		using the type {name} are still in place, they will not have
-		an effect and can no longer be removed by name.
-
-		{props} can contain a "bufnr" item.  When it is given, delete
-		a property type from this buffer instead of from the global
-		property types.
-
-		When text property type {name} is not found there is no error.
-
-		See |text-properties| for information about text properties.
-
-
-prop_type_get([{name} [, {props}])			*prop_type_get()*
-		Returns the properties of property type {name}.  This is a
-		dictionary with the same fields as was given to
-		prop_type_add().
-		When the property type {name} does not exist, an empty
-		dictionary is returned.
-
-		{props} can contain a "bufnr" item.  When it is given, use
-		this buffer instead of the global property types.
-
-		See |text-properties| for information about text properties.
-
-
-prop_type_list([{props}])				*prop_type_list()*
-		Returns a list with all property type names.
-
-		{props} can contain a "bufnr" item.  When it is given, use
-		this buffer instead of the global property types.
-
-		See |text-properties| for information about text properties.
-
+prop_ functions are documented here: |text-prop-functions|.
 
 pumvisible()						*pumvisible()*
 		Returns non-zero when the popup menu is visible, zero
@@ -8637,351 +7982,9 @@
 		'vartabstop' feature. If the 'vartabstop' setting is enabled and
 		no {col} argument is given, column 1 will be assumed.
 
-sign_define({name} [, {dict}])				*sign_define()*
-sign_define({list})
-		Define a new sign named {name} or modify the attributes of an
-		existing sign.  This is similar to the |:sign-define| command.
+sign_ functions are documented here: |sign-functions-details|
 
-		Prefix {name} with a unique text to avoid name collisions.
-		There is no {group} like with placing signs.
 
-		The {name} can be a String or a Number.  The optional {dict}
-		argument specifies the sign attributes.  The following values
-		are supported:
-		   icon		full path to the bitmap file for the sign.
-		   linehl	highlight group used for the whole line the
-				sign is placed in.
-		   text		text that is displayed when there is no icon
-				or the GUI is not being used.
-		   texthl	highlight group used for the text item
-
-		If the sign named {name} already exists, then the attributes
-		of the sign are updated.
-
-		The one argument {list} can be used to define a list of signs.
-		Each list item is a dictionary with the above items in {dict}
-		and a 'name' item for the sign name.
-
-		Returns 0 on success and -1 on failure.  When the one argument
-		{list} is used, then returns a List of values one for each
-		defined sign.
-
-		Examples: >
-			call sign_define("mySign", {
-				\ "text" : "=>",
-				\ "texthl" : "Error",
-				\ "linehl" : "Search"})
-			call sign_define([
-				\ {'name' : 'sign1',
-				\  'text' : '=>'},
-				\ {'name' : 'sign2',
-				\  'text' : '!!'}
-				\ ])
-<
-sign_getdefined([{name}])				*sign_getdefined()*
-		Get a list of defined signs and their attributes.
-		This is similar to the |:sign-list| command.
-
-		If the {name} is not supplied, then a list of all the defined
-		signs is returned. Otherwise the attribute of the specified
-		sign is returned.
-
-		Each list item in the returned value is a dictionary with the
-		following entries:
-		   icon		full path to the bitmap file of the sign
-		   linehl	highlight group used for the whole line the
-				sign is placed in.
-		   name		name of the sign
-		   text		text that is displayed when there is no icon
-				or the GUI is not being used.
-		   texthl	highlight group used for the text item
-
-		Returns an empty List if there are no signs and when {name} is
-		not found.
-
-		Examples: >
-			" Get a list of all the defined signs
-			echo sign_getdefined()
-
-			" Get the attribute of the sign named mySign
-			echo sign_getdefined("mySign")
-<
-sign_getplaced([{expr} [, {dict}]])			*sign_getplaced()*
-		Return a list of signs placed in a buffer or all the buffers.
-		This is similar to the |:sign-place-list| command.
-
-		If the optional buffer name {expr} is specified, then only the
-		list of signs placed in that buffer is returned.  For the use
-		of {expr}, see |bufname()|. The optional {dict} can contain
-		the following entries:
-		   group	select only signs in this group
-		   id		select sign with this identifier
-		   lnum		select signs placed in this line. For the use
-				of {lnum}, see |line()|.
-		If {group} is '*', then signs in all the groups including the
-		global group are returned. If {group} is not supplied or is an
-		empty string, then only signs in the global group are
-		returned.  If no arguments are supplied, then signs in the
-		global group placed in all the buffers are returned.
-		See |sign-group|.
-
-		Each list item in the returned value is a dictionary with the
-		following entries:
-			bufnr	number of the buffer with the sign
-			signs	list of signs placed in {bufnr}. Each list
-				item is a dictionary with the below listed
-				entries
-
-		The dictionary for each sign contains the following entries:
-			group	sign group. Set to '' for the global group.
-			id	identifier of the sign
-			lnum	line number where the sign is placed
-			name	name of the defined sign
-			priority	sign priority
-
-		The returned signs in a buffer are ordered by their line
-		number and priority.
-
-		Returns an empty list on failure or if there are no placed
-		signs.
-
-		Examples: >
-			" Get a List of signs placed in eval.c in the
-			" global group
-			echo sign_getplaced("eval.c")
-
-			" Get a List of signs in group 'g1' placed in eval.c
-			echo sign_getplaced("eval.c", {'group' : 'g1'})
-
-			" Get a List of signs placed at line 10 in eval.c
-			echo sign_getplaced("eval.c", {'lnum' : 10})
-
-			" Get sign with identifier 10 placed in a.py
-			echo sign_getplaced("a.py", {'id' : 10})
-
-			" Get sign with id 20 in group 'g1' placed in a.py
-			echo sign_getplaced("a.py", {'group' : 'g1',
-							\  'id' : 20})
-
-			" Get a List of all the placed signs
-			echo sign_getplaced()
-<
-							*sign_jump()*
-sign_jump({id}, {group}, {expr})
-		Open the buffer {expr} or jump to the window that contains
-		{expr} and position the cursor at sign {id} in group {group}.
-		This is similar to the |:sign-jump| command.
-
-		For the use of {expr}, see |bufname()|.
-
-		Returns the line number of the sign. Returns -1 if the
-		arguments are invalid.
-
-		Example: >
-			" Jump to sign 10 in the current buffer
-			call sign_jump(10, '', '')
-<
-							*sign_place()*
-sign_place({id}, {group}, {name}, {expr} [, {dict}])
-		Place the sign defined as {name} at line {lnum} in file or
-		buffer {expr} and assign {id} and {group} to sign.  This is
-		similar to the |:sign-place| command.
-
-		If the sign identifier {id} is zero, then a new identifier is
-		allocated.  Otherwise the specified number is used. {group} is
-		the sign group name. To use the global sign group, use an
-		empty string.  {group} functions as a namespace for {id}, thus
-		two groups can use the same IDs. Refer to |sign-identifier|
-		and |sign-group| for more information.
-
-		{name} refers to a defined sign.
-		{expr} refers to a buffer name or number. For the accepted
-		values, see |bufname()|.
-
-		The optional {dict} argument supports the following entries:
-			lnum		line number in the file or buffer
-					{expr} where the sign is to be placed.
-					For the accepted values, see |line()|.
-			priority	priority of the sign. See
-					|sign-priority| for more information.
-
-		If the optional {dict} is not specified, then it modifies the
-		placed sign {id} in group {group} to use the defined sign
-		{name}.
-
-		Returns the sign identifier on success and -1 on failure.
-
-		Examples: >
-			" Place a sign named sign1 with id 5 at line 20 in
-			" buffer json.c
-			call sign_place(5, '', 'sign1', 'json.c',
-							\ {'lnum' : 20})
-
-			" Updates sign 5 in buffer json.c to use sign2
-			call sign_place(5, '', 'sign2', 'json.c')
-
-			" Place a sign named sign3 at line 30 in
-			" buffer json.c with a new identifier
-			let id = sign_place(0, '', 'sign3', 'json.c',
-							\ {'lnum' : 30})
-
-			" Place a sign named sign4 with id 10 in group 'g3'
-			" at line 40 in buffer json.c with priority 90
-			call sign_place(10, 'g3', 'sign4', 'json.c',
-					\ {'lnum' : 40, 'priority' : 90})
-<
-							*sign_placelist()*
-sign_placelist({list})
-		Place one or more signs.  This is similar to the
-		|sign_place()| function.  The {list} argument specifies the
-		List of signs to place. Each list item is a dict with the
-		following sign attributes:
-		    buffer	buffer name or number. For the accepted
-				values, see |bufname()|.
-		    group	sign group. {group} functions as a namespace
-				for {id}, thus two groups can use the same
-				IDs. If not specified or set to an empty
-				string, then the global group is used.   See
-				|sign-group| for more information.
-		    id		sign identifier. If not specified or zero,
-				then a new unique identifier is allocated.
-				Otherwise the specified number is used. See
-				|sign-identifier| for more information.
-		    lnum	line number in the buffer {expr} where the
-				sign is to be placed. For the accepted values,
-				see |line()|.
-		    name	name of the sign to place. See |sign_define()|
-		    		for more information.
-		    priority	priority of the sign. When multiple signs are
-				placed on a line, the sign with the highest
-				priority is used. If not specified, the
-				default value of 10 is used. See
-				|sign-priority| for more information.
-
-		If {id} refers to an existing sign, then the existing sign is
-		modified to use the specified {name} and/or {priority}.
-
-		Returns a List of sign identifiers. If failed to place a
-		sign, the corresponding list item is set to -1.
-
-		Examples: >
-			" Place sign s1 with id 5 at line 20 and id 10 at line
-			" 30 in buffer a.c
-			let [n1, n2] = sign_placelist([
-				\ {'id' : 5,
-				\  'name' : 's1',
-				\  'buffer' : 'a.c',
-				\  'lnum' : 20},
-				\ {'id' : 10,
-				\  'name' : 's1',
-				\  'buffer' : 'a.c',
-				\  'lnum' : 30}
-				\ ])
-
-			" Place sign s1 in buffer a.c at line 40 and 50
-			" with auto-generated identifiers
-			let [n1, n2] = sign_placelist([
-				\ {'name' : 's1',
-				\  'buffer' : 'a.c',
-				\  'lnum' : 40},
-				\ {'name' : 's1',
-				\  'buffer' : 'a.c',
-				\  'lnum' : 50}
-				\ ])
-<
-sign_undefine([{name}])					*sign_undefine()*
-sign_undefine({list})
-		Deletes a previously defined sign {name}. This is similar to
-		the |:sign-undefine| command. If {name} is not supplied, then
-		deletes all the defined signs.
-
-		The one argument {list} can be used to undefine a list of
-		signs. Each list item is the name of a sign.
-
-		Returns 0 on success and -1 on failure.  For the one argument
-		{list} call, returns a list of values one for each undefined
-		sign.
-
-		Examples: >
-			" Delete a sign named mySign
-			call sign_undefine("mySign")
-
-			" Delete signs 'sign1' and 'sign2'
-			call sign_undefine(["sign1", "sign2"])
-
-			" Delete all the signs
-			call sign_undefine()
-<
-sign_unplace({group} [, {dict}])			*sign_unplace()*
-		Remove a previously placed sign in one or more buffers.  This
-		is similar to the |:sign-unplace| command.
-
-		{group} is the sign group name. To use the global sign group,
-		use an empty string.  If {group} is set to '*', then all the
-		groups including the global group are used.
-		The signs in {group} are selected based on the entries in
-		{dict}.  The following optional entries in {dict} are
-		supported:
-			buffer	buffer name or number. See |bufname()|.
-			id	sign identifier
-		If {dict} is not supplied, then all the signs in {group} are
-		removed.
-
-		Returns 0 on success and -1 on failure.
-
-		Examples: >
-			" Remove sign 10 from buffer a.vim
-			call sign_unplace('', {'buffer' : "a.vim", 'id' : 10})
-
-			" Remove sign 20 in group 'g1' from buffer 3
-			call sign_unplace('g1', {'buffer' : 3, 'id' : 20})
-
-			" Remove all the signs in group 'g2' from buffer 10
-			call sign_unplace('g2', {'buffer' : 10})
-
-			" Remove sign 30 in group 'g3' from all the buffers
-			call sign_unplace('g3', {'id' : 30})
-
-			" Remove all the signs placed in buffer 5
-			call sign_unplace('*', {'buffer' : 5})
-
-			" Remove the signs in group 'g4' from all the buffers
-			call sign_unplace('g4')
-
-			" Remove sign 40 from all the buffers
-			call sign_unplace('*', {'id' : 40})
-
-			" Remove all the placed signs from all the buffers
-			call sign_unplace('*')
-<
-sign_unplacelist({list})				*sign_unplacelist()*
-		Remove previously placed signs from one or more buffers.  This
-		is similar to the |sign_unplace()| function.
-
-		The {list} argument specifies the List of signs to remove.
-		Each list item is a dict with the following sign attributes:
-		    buffer	buffer name or number. For the accepted
-				values, see |bufname()|. If not specified,
-				then the specified sign is removed from all
-				the buffers.
-		    group	sign group name. If not specified or set to an
-				empty string, then the global sign group is
-				used. If set to '*', then all the groups
-				including the global group are used.
-		    id		sign identifier. If not specified, then all
-				the signs in the specified group are removed.
-
-		Returns a List where an entry is set to 0 if the corresponding
-		sign was successfully removed or -1 on failure.
-
-		Example: >
-			" Remove sign with id 10 from buffer a.vim and sign
-			" with id 20 from buffer b.vim
-			call sign_unplacelist([
-				\ {'id' : 10, 'buffer' : "a.vim"},
-				\ {'id' : 20, 'buffer' : 'b.vim'},
-				\ ])
-<
 simplify({filename})					*simplify()*
 		Simplify the file name as much as possible without changing
 		the meaning.  Shortcuts (on MS-Windows) or symbolic links (on
@@ -9822,147 +8825,11 @@
 		For MS-Windows forward slashes are used when the 'shellslash'
 		option is set or when 'shellcmdflag' starts with '-'.
 
+
 term_ functions are documented here: |terminal-function-details|
 
-test_alloc_fail({id}, {countdown}, {repeat})		*test_alloc_fail()*
-		This is for testing: If the memory allocation with {id} is
-		called, then decrement {countdown}, and when it reaches zero
-		let memory allocation fail {repeat} times.  When {repeat} is
-		smaller than one it fails one time.
+test_ functions are documented here: |test-functions|
 
-test_autochdir()					*test_autochdir()*
-		Set a flag to enable the effect of 'autochdir' before Vim
-		startup has finished.
-
-test_feedinput({string})				*test_feedinput()*
-		Characters in {string} are queued for processing as if they
-		were typed by the user. This uses a low level input buffer.
-		This function works only when with |+unix| or GUI is running.
-
-test_garbagecollect_now()			 *test_garbagecollect_now()*
-		Like garbagecollect(), but executed right away.  This must
-		only be called directly to avoid any structure to exist
-		internally, and |v:testing| must have been set before calling
-		any function.
-
-test_garbagecollect_soon()			 *test_garbagecollect_soon()*
-		Set the flag to call the garbagecollector as if in the main
-		loop.  Only to be used in tests.
-
-test_getvalue({name})					*test_getvalue()*
-		Get the value of an internal variable.  These values for
-		{name} are supported:
-			need_fileinfo
-
-test_ignore_error({expr})			 *test_ignore_error()*
-		Ignore any error containing {expr}.  A normal message is given
-		instead.
-		This is only meant to be used in tests, where catching the
-		error with try/catch cannot be used (because it skips over
-		following code).
-		{expr} is used literally, not as a pattern.
-		When the {expr} is the string "RESET" then the list of ignored
-		errors is made empty.
-
-test_null_blob()					*test_null_blob()*
-		Return a |Blob| that is null. Only useful for testing.
-
-test_null_channel()					*test_null_channel()*
-		Return a |Channel| that is null. Only useful for testing.
-		{only available when compiled with the +channel feature}
-
-test_null_dict()					*test_null_dict()*
-		Return a |Dict| that is null. Only useful for testing.
-
-test_null_job()						*test_null_job()*
-		Return a |Job| that is null. Only useful for testing.
-		{only available when compiled with the +job feature}
-
-test_null_list()					*test_null_list()*
-		Return a |List| that is null. Only useful for testing.
-
-test_null_partial()					*test_null_partial()*
-		Return a |Partial| that is null. Only useful for testing.
-
-test_null_string()					*test_null_string()*
-		Return a |String| that is null. Only useful for testing.
-
-test_option_not_set({name})				*test_option_not_set()*
-		Reset the flag that indicates option {name} was set.  Thus it
-		looks like it still has the default value. Use like this: >
-			set ambiwidth=double
-			call test_option_not_set('ambiwidth')
-<		Now the 'ambiwidth' option behaves like it was never changed,
-		even though the value is "double".
-		Only to be used for testing!
-
-test_override({name}, {val})				*test_override()*
-		Overrides certain parts of Vim's internal processing to be able
-		to run tests. Only to be used for testing Vim!
-		The override is enabled when {val} is non-zero and removed
-		when {val} is zero.
-		Current supported values for name are:
-
-		name	     effect when {val} is non-zero ~
-		redraw       disable the redrawing() function
-		redraw_flag  ignore the RedrawingDisabled flag
-		char_avail   disable the char_avail() function
-		starting     reset the "starting" variable, see below
-		nfa_fail     makes the NFA regexp engine fail to force a
-			     fallback to the old engine
-		no_query_mouse  do not query the mouse position for "dec"
-				terminals
-		no_wait_return	set the "no_wait_return" flag.  Not restored
-				with "ALL".
-		ALL	     clear all overrides ({val} is not used)
-
-		"starting" is to be used when a test should behave like
-		startup was done.  Since the tests are run by sourcing a
-		script the "starting" variable is non-zero. This is usually a
-		good thing (tests run faster), but sometimes changes behavior
-		in a way that the test doesn't work properly.
-		When using: >
-			call test_override('starting', 1)
-<		The value of "starting" is saved.  It is restored by: >
-			call test_override('starting', 0)
-
-test_refcount({expr})					*test_refcount()*
-		Return the reference count of {expr}.  When {expr} is of a
-		type that does not have a reference count, returns -1.  Only
-		to be used for testing.
-
-test_scrollbar({which}, {value}, {dragging})		*test_scrollbar()*
-		Pretend using scrollbar {which} to move it to position
-		{value}.  {which} can be:
-			left	Left scrollbar of the current window
-			right	Right scrollbar of the current window
-			hor	Horizontal scrollbar
-
-		For the vertical scrollbars {value} can be 1 to the
-		line-count of the buffer.  For the horizontal scrollbar the
-		{value} can be between 1 and the maximum line length, assuming
-		'wrap' is not set.
-
-		When {dragging} is non-zero it's like dragging the scrollbar,
-		otherwise it's like clicking in the scrollbar.
-		Only works when the {which} scrollbar actually exists,
-		obviously only when using the GUI.
-
-test_setmouse({row}, {col})				*test_setmouse()*
-		Set the mouse position to be used for the next mouse action.
-		{row} and {col} are one based.
-		For example: >
-			call test_setmouse(4, 20)
-			call feedkeys("\<LeftMouse>", "xt")
-
-test_settime({expr})					*test_settime()*
-		Set the time Vim uses internally.  Currently only used for
-		timestamps in the history, as they are used in viminfo, and
-		for undo.
-		Using a value of 1 makes Vim not sleep after a warning or
-		error message.
-		{expr} must evaluate to a number.  When the value is zero the
-		normal behavior is restored.
 
 							*timer_info()*
 timer_info([{id}])
@@ -13121,26 +11988,5 @@
 	- closing a window or quitting Vim
 	- etc.
 
-==============================================================================
-14. Testing							*testing*
-
-Vim can be tested after building it, usually with "make test".
-The tests are located in the directory "src/testdir".
-
-There are several types of tests added over time:
-	test33.in		oldest, don't add any more
-	test_something.in	old style tests
-	test_something.vim	new style tests
-
-						*new-style-testing*
-New tests should be added as new style tests.  These use functions such as
-|assert_equal()| to keep the test commands and the expected result in one
-place.
-						*old-style-testing*
-In some cases an old style test needs to be used.  E.g. when testing Vim
-without the |+eval| feature.
-
-Find more information in the file src/testdir/README.txt.
-
 
  vim:tw=78:ts=8:noet:ft=help:norl:
diff --git a/runtime/doc/help.txt b/runtime/doc/help.txt
index ef5394d..4550a5c 100644
--- a/runtime/doc/help.txt
+++ b/runtime/doc/help.txt
@@ -1,4 +1,4 @@
-*help.txt*	For Vim version 8.1.  Last change: 2019 May 12
+*help.txt*	For Vim version 8.1.  Last change: 2019 Jul 21
 
 			VIM - main help file
 									 k
@@ -139,6 +139,7 @@
 |fold.txt|	hide (fold) ranges of lines
 
 Special issues ~
+|testing.txt|	testing Vim and Vim scripts
 |print.txt|	printing
 |remote.txt|	using Vim as a server or client
 |term.txt|	using different terminals and mice
diff --git a/runtime/doc/sign.txt b/runtime/doc/sign.txt
index 519a3d3..0e858d6 100644
--- a/runtime/doc/sign.txt
+++ b/runtime/doc/sign.txt
@@ -1,4 +1,4 @@
-*sign.txt*      For Vim version 8.1.  Last change: 2019 Jun 04
+*sign.txt*      For Vim version 8.1.  Last change: 2019 Jul 21
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur
@@ -9,6 +9,7 @@
 
 1. Introduction				|sign-intro|
 2. Commands				|sign-commands|
+3. Functions				|sign-functions-details|
 
 {only available when compiled with the |+signs| feature}
 
@@ -344,4 +345,357 @@
 		Same but jump to the sign in group {group}
 
 
+==============================================================================
+3. Functions					*sign-functions-details*
+
+sign_define({name} [, {dict}])				*sign_define()*
+sign_define({list})
+		Define a new sign named {name} or modify the attributes of an
+		existing sign.  This is similar to the |:sign-define| command.
+
+		Prefix {name} with a unique text to avoid name collisions.
+		There is no {group} like with placing signs.
+
+		The {name} can be a String or a Number.  The optional {dict}
+		argument specifies the sign attributes.  The following values
+		are supported:
+		   icon		full path to the bitmap file for the sign.
+		   linehl	highlight group used for the whole line the
+				sign is placed in.
+		   text		text that is displayed when there is no icon
+				or the GUI is not being used.
+		   texthl	highlight group used for the text item
+
+		If the sign named {name} already exists, then the attributes
+		of the sign are updated.
+
+		The one argument {list} can be used to define a list of signs.
+		Each list item is a dictionary with the above items in {dict}
+		and a 'name' item for the sign name.
+
+		Returns 0 on success and -1 on failure.  When the one argument
+		{list} is used, then returns a List of values one for each
+		defined sign.
+
+		Examples: >
+			call sign_define("mySign", {
+				\ "text" : "=>",
+				\ "texthl" : "Error",
+				\ "linehl" : "Search"})
+			call sign_define([
+				\ {'name' : 'sign1',
+				\  'text' : '=>'},
+				\ {'name' : 'sign2',
+				\  'text' : '!!'}
+				\ ])
+<
+sign_getdefined([{name}])				*sign_getdefined()*
+		Get a list of defined signs and their attributes.
+		This is similar to the |:sign-list| command.
+
+		If the {name} is not supplied, then a list of all the defined
+		signs is returned. Otherwise the attribute of the specified
+		sign is returned.
+
+		Each list item in the returned value is a dictionary with the
+		following entries:
+		   icon		full path to the bitmap file of the sign
+		   linehl	highlight group used for the whole line the
+				sign is placed in.
+		   name		name of the sign
+		   text		text that is displayed when there is no icon
+				or the GUI is not being used.
+		   texthl	highlight group used for the text item
+
+		Returns an empty List if there are no signs and when {name} is
+		not found.
+
+		Examples: >
+			" Get a list of all the defined signs
+			echo sign_getdefined()
+
+			" Get the attribute of the sign named mySign
+			echo sign_getdefined("mySign")
+<
+sign_getplaced([{expr} [, {dict}]])			*sign_getplaced()*
+		Return a list of signs placed in a buffer or all the buffers.
+		This is similar to the |:sign-place-list| command.
+
+		If the optional buffer name {expr} is specified, then only the
+		list of signs placed in that buffer is returned.  For the use
+		of {expr}, see |bufname()|. The optional {dict} can contain
+		the following entries:
+		   group	select only signs in this group
+		   id		select sign with this identifier
+		   lnum		select signs placed in this line. For the use
+				of {lnum}, see |line()|.
+		If {group} is '*', then signs in all the groups including the
+		global group are returned. If {group} is not supplied or is an
+		empty string, then only signs in the global group are
+		returned.  If no arguments are supplied, then signs in the
+		global group placed in all the buffers are returned.
+		See |sign-group|.
+
+		Each list item in the returned value is a dictionary with the
+		following entries:
+			bufnr	number of the buffer with the sign
+			signs	list of signs placed in {bufnr}. Each list
+				item is a dictionary with the below listed
+				entries
+
+		The dictionary for each sign contains the following entries:
+			group	sign group. Set to '' for the global group.
+			id	identifier of the sign
+			lnum	line number where the sign is placed
+			name	name of the defined sign
+			priority	sign priority
+
+		The returned signs in a buffer are ordered by their line
+		number and priority.
+
+		Returns an empty list on failure or if there are no placed
+		signs.
+
+		Examples: >
+			" Get a List of signs placed in eval.c in the
+			" global group
+			echo sign_getplaced("eval.c")
+
+			" Get a List of signs in group 'g1' placed in eval.c
+			echo sign_getplaced("eval.c", {'group' : 'g1'})
+
+			" Get a List of signs placed at line 10 in eval.c
+			echo sign_getplaced("eval.c", {'lnum' : 10})
+
+			" Get sign with identifier 10 placed in a.py
+			echo sign_getplaced("a.py", {'id' : 10})
+
+			" Get sign with id 20 in group 'g1' placed in a.py
+			echo sign_getplaced("a.py", {'group' : 'g1',
+							\  'id' : 20})
+
+			" Get a List of all the placed signs
+			echo sign_getplaced()
+<
+							*sign_jump()*
+sign_jump({id}, {group}, {expr})
+		Open the buffer {expr} or jump to the window that contains
+		{expr} and position the cursor at sign {id} in group {group}.
+		This is similar to the |:sign-jump| command.
+
+		For the use of {expr}, see |bufname()|.
+
+		Returns the line number of the sign. Returns -1 if the
+		arguments are invalid.
+
+		Example: >
+			" Jump to sign 10 in the current buffer
+			call sign_jump(10, '', '')
+<
+
+							*sign_place()*
+sign_place({id}, {group}, {name}, {expr} [, {dict}])
+		Place the sign defined as {name} at line {lnum} in file or
+		buffer {expr} and assign {id} and {group} to sign.  This is
+		similar to the |:sign-place| command.
+
+		If the sign identifier {id} is zero, then a new identifier is
+		allocated.  Otherwise the specified number is used. {group} is
+		the sign group name. To use the global sign group, use an
+		empty string.  {group} functions as a namespace for {id}, thus
+		two groups can use the same IDs. Refer to |sign-identifier|
+		and |sign-group| for more information.
+
+		{name} refers to a defined sign.
+		{expr} refers to a buffer name or number. For the accepted
+		values, see |bufname()|.
+
+		The optional {dict} argument supports the following entries:
+			lnum		line number in the file or buffer
+					{expr} where the sign is to be placed.
+					For the accepted values, see |line()|.
+			priority	priority of the sign. See
+					|sign-priority| for more information.
+
+		If the optional {dict} is not specified, then it modifies the
+		placed sign {id} in group {group} to use the defined sign
+		{name}.
+
+		Returns the sign identifier on success and -1 on failure.
+
+		Examples: >
+			" Place a sign named sign1 with id 5 at line 20 in
+			" buffer json.c
+			call sign_place(5, '', 'sign1', 'json.c',
+							\ {'lnum' : 20})
+
+			" Updates sign 5 in buffer json.c to use sign2
+			call sign_place(5, '', 'sign2', 'json.c')
+
+			" Place a sign named sign3 at line 30 in
+			" buffer json.c with a new identifier
+			let id = sign_place(0, '', 'sign3', 'json.c',
+							\ {'lnum' : 30})
+
+			" Place a sign named sign4 with id 10 in group 'g3'
+			" at line 40 in buffer json.c with priority 90
+			call sign_place(10, 'g3', 'sign4', 'json.c',
+					\ {'lnum' : 40, 'priority' : 90})
+<
+
+							*sign_placelist()*
+sign_placelist({list})
+		Place one or more signs.  This is similar to the
+		|sign_place()| function.  The {list} argument specifies the
+		List of signs to place. Each list item is a dict with the
+		following sign attributes:
+		    buffer	buffer name or number. For the accepted
+				values, see |bufname()|.
+		    group	sign group. {group} functions as a namespace
+				for {id}, thus two groups can use the same
+				IDs. If not specified or set to an empty
+				string, then the global group is used.   See
+				|sign-group| for more information.
+		    id		sign identifier. If not specified or zero,
+				then a new unique identifier is allocated.
+				Otherwise the specified number is used. See
+				|sign-identifier| for more information.
+		    lnum	line number in the buffer {expr} where the
+				sign is to be placed. For the accepted values,
+				see |line()|.
+		    name	name of the sign to place. See |sign_define()|
+		    		for more information.
+		    priority	priority of the sign. When multiple signs are
+				placed on a line, the sign with the highest
+				priority is used. If not specified, the
+				default value of 10 is used. See
+				|sign-priority| for more information.
+
+		If {id} refers to an existing sign, then the existing sign is
+		modified to use the specified {name} and/or {priority}.
+
+		Returns a List of sign identifiers. If failed to place a
+		sign, the corresponding list item is set to -1.
+
+		Examples: >
+			" Place sign s1 with id 5 at line 20 and id 10 at line
+			" 30 in buffer a.c
+			let [n1, n2] = sign_placelist([
+				\ {'id' : 5,
+				\  'name' : 's1',
+				\  'buffer' : 'a.c',
+				\  'lnum' : 20},
+				\ {'id' : 10,
+				\  'name' : 's1',
+				\  'buffer' : 'a.c',
+				\  'lnum' : 30}
+				\ ])
+
+			" Place sign s1 in buffer a.c at line 40 and 50
+			" with auto-generated identifiers
+			let [n1, n2] = sign_placelist([
+				\ {'name' : 's1',
+				\  'buffer' : 'a.c',
+				\  'lnum' : 40},
+				\ {'name' : 's1',
+				\  'buffer' : 'a.c',
+				\  'lnum' : 50}
+				\ ])
+<
+
+sign_undefine([{name}])					*sign_undefine()*
+sign_undefine({list})
+		Deletes a previously defined sign {name}. This is similar to
+		the |:sign-undefine| command. If {name} is not supplied, then
+		deletes all the defined signs.
+
+		The one argument {list} can be used to undefine a list of
+		signs. Each list item is the name of a sign.
+
+		Returns 0 on success and -1 on failure.  For the one argument
+		{list} call, returns a list of values one for each undefined
+		sign.
+
+		Examples: >
+			" Delete a sign named mySign
+			call sign_undefine("mySign")
+
+			" Delete signs 'sign1' and 'sign2'
+			call sign_undefine(["sign1", "sign2"])
+
+			" Delete all the signs
+			call sign_undefine()
+<
+
+sign_unplace({group} [, {dict}])			*sign_unplace()*
+		Remove a previously placed sign in one or more buffers.  This
+		is similar to the |:sign-unplace| command.
+
+		{group} is the sign group name. To use the global sign group,
+		use an empty string.  If {group} is set to '*', then all the
+		groups including the global group are used.
+		The signs in {group} are selected based on the entries in
+		{dict}.  The following optional entries in {dict} are
+		supported:
+			buffer	buffer name or number. See |bufname()|.
+			id	sign identifier
+		If {dict} is not supplied, then all the signs in {group} are
+		removed.
+
+		Returns 0 on success and -1 on failure.
+
+		Examples: >
+			" Remove sign 10 from buffer a.vim
+			call sign_unplace('', {'buffer' : "a.vim", 'id' : 10})
+
+			" Remove sign 20 in group 'g1' from buffer 3
+			call sign_unplace('g1', {'buffer' : 3, 'id' : 20})
+
+			" Remove all the signs in group 'g2' from buffer 10
+			call sign_unplace('g2', {'buffer' : 10})
+
+			" Remove sign 30 in group 'g3' from all the buffers
+			call sign_unplace('g3', {'id' : 30})
+
+			" Remove all the signs placed in buffer 5
+			call sign_unplace('*', {'buffer' : 5})
+
+			" Remove the signs in group 'g4' from all the buffers
+			call sign_unplace('g4')
+
+			" Remove sign 40 from all the buffers
+			call sign_unplace('*', {'id' : 40})
+
+			" Remove all the placed signs from all the buffers
+			call sign_unplace('*')
+<
+sign_unplacelist({list})				*sign_unplacelist()*
+		Remove previously placed signs from one or more buffers.  This
+		is similar to the |sign_unplace()| function.
+
+		The {list} argument specifies the List of signs to remove.
+		Each list item is a dict with the following sign attributes:
+		    buffer	buffer name or number. For the accepted
+				values, see |bufname()|. If not specified,
+				then the specified sign is removed from all
+				the buffers.
+		    group	sign group name. If not specified or set to an
+				empty string, then the global sign group is
+				used. If set to '*', then all the groups
+				including the global group are used.
+		    id		sign identifier. If not specified, then all
+				the signs in the specified group are removed.
+
+		Returns a List where an entry is set to 0 if the corresponding
+		sign was successfully removed or -1 on failure.
+
+		Example: >
+			" Remove sign with id 10 from buffer a.vim and sign
+			" with id 20 from buffer b.vim
+			call sign_unplacelist([
+				\ {'id' : 10, 'buffer' : "a.vim"},
+				\ {'id' : 20, 'buffer' : 'b.vim'},
+				\ ])
+<
+
  vim:tw=78:ts=8:noet:ft=help:norl:
diff --git a/runtime/doc/tags b/runtime/doc/tags
index 40cd008..75071e6 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -3914,6 +3914,7 @@
 E17	message.txt	/*E17*
 E170	eval.txt	/*E170*
 E171	eval.txt	/*E171*
+E172	eval.txt	/*E172*
 E173	message.txt	/*E173*
 E174	map.txt	/*E174*
 E175	map.txt	/*E175*
@@ -3967,6 +3968,7 @@
 E219	message.txt	/*E219*
 E22	message.txt	/*E22*
 E220	message.txt	/*E220*
+E221	eval.txt	/*E221*
 E222	message.txt	/*E222*
 E223	options.txt	/*E223*
 E224	map.txt	/*E224*
@@ -4683,12 +4685,12 @@
 E91	options.txt	/*E91*
 E910	eval.txt	/*E910*
 E911	eval.txt	/*E911*
-E912	eval.txt	/*E912*
+E912	channel.txt	/*E912*
 E913	eval.txt	/*E913*
 E914	eval.txt	/*E914*
 E915	channel.txt	/*E915*
-E916	eval.txt	/*E916*
-E917	eval.txt	/*E917*
+E916	channel.txt	/*E916*
+E917	channel.txt	/*E917*
 E918	channel.txt	/*E918*
 E919	repeat.txt	/*E919*
 E92	message.txt	/*E92*
@@ -4739,14 +4741,14 @@
 E961	cmdline.txt	/*E961*
 E962	eval.txt	/*E962*
 E963	eval.txt	/*E963*
-E964	eval.txt	/*E964*
-E965	eval.txt	/*E965*
-E966	eval.txt	/*E966*
+E964	textprop.txt	/*E964*
+E965	textprop.txt	/*E965*
+E966	textprop.txt	/*E966*
 E967	textprop.txt	/*E967*
-E968	eval.txt	/*E968*
-E969	eval.txt	/*E969*
+E968	textprop.txt	/*E968*
+E969	textprop.txt	/*E969*
 E97	diff.txt	/*E97*
-E970	eval.txt	/*E970*
+E970	textprop.txt	/*E970*
 E971	textprop.txt	/*E971*
 E972	eval.txt	/*E972*
 E973	eval.txt	/*E973*
@@ -5291,19 +5293,20 @@
 asm.vim	syntax.txt	/*asm.vim*
 asm68k	syntax.txt	/*asm68k*
 asmh8300.vim	syntax.txt	/*asmh8300.vim*
+assert-functions	testing.txt	/*assert-functions*
 assert-return	eval.txt	/*assert-return*
-assert_beeps()	eval.txt	/*assert_beeps()*
-assert_equal()	eval.txt	/*assert_equal()*
-assert_equalfile()	eval.txt	/*assert_equalfile()*
-assert_exception()	eval.txt	/*assert_exception()*
-assert_fails()	eval.txt	/*assert_fails()*
-assert_false()	eval.txt	/*assert_false()*
-assert_inrange()	eval.txt	/*assert_inrange()*
-assert_match()	eval.txt	/*assert_match()*
-assert_notequal()	eval.txt	/*assert_notequal()*
-assert_notmatch()	eval.txt	/*assert_notmatch()*
-assert_report()	eval.txt	/*assert_report()*
-assert_true()	eval.txt	/*assert_true()*
+assert_beeps()	testing.txt	/*assert_beeps()*
+assert_equal()	testing.txt	/*assert_equal()*
+assert_equalfile()	testing.txt	/*assert_equalfile()*
+assert_exception()	testing.txt	/*assert_exception()*
+assert_fails()	testing.txt	/*assert_fails()*
+assert_false()	testing.txt	/*assert_false()*
+assert_inrange()	testing.txt	/*assert_inrange()*
+assert_match()	testing.txt	/*assert_match()*
+assert_notequal()	testing.txt	/*assert_notequal()*
+assert_notmatch()	testing.txt	/*assert_notmatch()*
+assert_report()	testing.txt	/*assert_report()*
+assert_true()	testing.txt	/*assert_true()*
 at	motion.txt	/*at*
 atan()	eval.txt	/*atan()*
 atan2()	eval.txt	/*atan2()*
@@ -5574,24 +5577,24 @@
 ceil()	eval.txt	/*ceil()*
 cfilter-plugin	quickfix.txt	/*cfilter-plugin*
 ch.vim	syntax.txt	/*ch.vim*
-ch_canread()	eval.txt	/*ch_canread()*
-ch_close()	eval.txt	/*ch_close()*
-ch_close_in()	eval.txt	/*ch_close_in()*
-ch_evalexpr()	eval.txt	/*ch_evalexpr()*
-ch_evalraw()	eval.txt	/*ch_evalraw()*
-ch_getbufnr()	eval.txt	/*ch_getbufnr()*
-ch_getjob()	eval.txt	/*ch_getjob()*
-ch_info()	eval.txt	/*ch_info()*
-ch_log()	eval.txt	/*ch_log()*
-ch_logfile()	eval.txt	/*ch_logfile()*
-ch_open()	eval.txt	/*ch_open()*
-ch_read()	eval.txt	/*ch_read()*
-ch_readblob()	eval.txt	/*ch_readblob()*
-ch_readraw()	eval.txt	/*ch_readraw()*
-ch_sendexpr()	eval.txt	/*ch_sendexpr()*
-ch_sendraw()	eval.txt	/*ch_sendraw()*
-ch_setoptions()	eval.txt	/*ch_setoptions()*
-ch_status()	eval.txt	/*ch_status()*
+ch_canread()	channel.txt	/*ch_canread()*
+ch_close()	channel.txt	/*ch_close()*
+ch_close_in()	channel.txt	/*ch_close_in()*
+ch_evalexpr()	channel.txt	/*ch_evalexpr()*
+ch_evalraw()	channel.txt	/*ch_evalraw()*
+ch_getbufnr()	channel.txt	/*ch_getbufnr()*
+ch_getjob()	channel.txt	/*ch_getjob()*
+ch_info()	channel.txt	/*ch_info()*
+ch_log()	channel.txt	/*ch_log()*
+ch_logfile()	channel.txt	/*ch_logfile()*
+ch_open()	channel.txt	/*ch_open()*
+ch_read()	channel.txt	/*ch_read()*
+ch_readblob()	channel.txt	/*ch_readblob()*
+ch_readraw()	channel.txt	/*ch_readraw()*
+ch_sendexpr()	channel.txt	/*ch_sendexpr()*
+ch_sendraw()	channel.txt	/*ch_sendraw()*
+ch_setoptions()	channel.txt	/*ch_setoptions()*
+ch_status()	channel.txt	/*ch_status()*
 change-list-jumps	motion.txt	/*change-list-jumps*
 change-name	tips.txt	/*change-name*
 change-tabs	change.txt	/*change-tabs*
@@ -5626,6 +5629,7 @@
 channel-demo	channel.txt	/*channel-demo*
 channel-drop	channel.txt	/*channel-drop*
 channel-functions	usr_41.txt	/*channel-functions*
+channel-functions-details	channel.txt	/*channel-functions-details*
 channel-mode	channel.txt	/*channel-mode*
 channel-more	channel.txt	/*channel-more*
 channel-noblock	channel.txt	/*channel-noblock*
@@ -7363,6 +7367,7 @@
 job-err_io	channel.txt	/*job-err_io*
 job-exit_cb	channel.txt	/*job-exit_cb*
 job-functions	usr_41.txt	/*job-functions*
+job-functions-details	channel.txt	/*job-functions-details*
 job-in_io	channel.txt	/*job-in_io*
 job-noblock	channel.txt	/*job-noblock*
 job-options	channel.txt	/*job-options*
@@ -7374,12 +7379,12 @@
 job-stoponexit	channel.txt	/*job-stoponexit*
 job-term	channel.txt	/*job-term*
 job-timeout	channel.txt	/*job-timeout*
-job_getchannel()	eval.txt	/*job_getchannel()*
-job_info()	eval.txt	/*job_info()*
-job_setoptions()	eval.txt	/*job_setoptions()*
-job_start()	eval.txt	/*job_start()*
-job_status()	eval.txt	/*job_status()*
-job_stop()	eval.txt	/*job_stop()*
+job_getchannel()	channel.txt	/*job_getchannel()*
+job_info()	channel.txt	/*job_info()*
+job_setoptions()	channel.txt	/*job_setoptions()*
+job_start()	channel.txt	/*job_start()*
+job_status()	channel.txt	/*job_status()*
+job_stop()	channel.txt	/*job_stop()*
 join()	eval.txt	/*join()*
 js_decode()	eval.txt	/*js_decode()*
 js_encode()	eval.txt	/*js_encode()*
@@ -8036,7 +8041,7 @@
 new-searchpat	version6.txt	/*new-searchpat*
 new-session-files	version5.txt	/*new-session-files*
 new-spell	version7.txt	/*new-spell*
-new-style-testing	eval.txt	/*new-style-testing*
+new-style-testing	testing.txt	/*new-style-testing*
 new-tab-pages	version7.txt	/*new-tab-pages*
 new-terminal-window	version8.txt	/*new-terminal-window*
 new-undo-branches	version7.txt	/*new-undo-branches*
@@ -8084,7 +8089,7 @@
 octal	eval.txt	/*octal*
 octal-nrformats	options.txt	/*octal-nrformats*
 octal-number	eval.txt	/*octal-number*
-old-style-testing	eval.txt	/*old-style-testing*
+old-style-testing	testing.txt	/*old-style-testing*
 oldfiles-variable	eval.txt	/*oldfiles-variable*
 ole-activation	if_ole.txt	/*ole-activation*
 ole-eval	if_ole.txt	/*ole-eval*
@@ -8321,16 +8326,16 @@
 prompt_setprompt()	eval.txt	/*prompt_setprompt()*
 promptbuffer-functions	usr_41.txt	/*promptbuffer-functions*
 pronounce	intro.txt	/*pronounce*
-prop_add()	eval.txt	/*prop_add()*
-prop_clear()	eval.txt	/*prop_clear()*
-prop_find()	eval.txt	/*prop_find()*
-prop_list()	eval.txt	/*prop_list()*
-prop_remove()	eval.txt	/*prop_remove()*
-prop_type_add()	eval.txt	/*prop_type_add()*
-prop_type_change()	eval.txt	/*prop_type_change()*
-prop_type_delete()	eval.txt	/*prop_type_delete()*
-prop_type_get()	eval.txt	/*prop_type_get()*
-prop_type_list()	eval.txt	/*prop_type_list()*
+prop_add()	textprop.txt	/*prop_add()*
+prop_clear()	textprop.txt	/*prop_clear()*
+prop_find()	textprop.txt	/*prop_find()*
+prop_list()	textprop.txt	/*prop_list()*
+prop_remove()	textprop.txt	/*prop_remove()*
+prop_type_add()	textprop.txt	/*prop_type_add()*
+prop_type_change()	textprop.txt	/*prop_type_change()*
+prop_type_delete()	textprop.txt	/*prop_type_delete()*
+prop_type_get()	textprop.txt	/*prop_type_get()*
+prop_type_list()	textprop.txt	/*prop_type_list()*
 psql	ft_sql.txt	/*psql*
 ptcap.vim	syntax.txt	/*ptcap.vim*
 pterm-mouse	options.txt	/*pterm-mouse*
@@ -8692,21 +8697,22 @@
 sign-column	sign.txt	/*sign-column*
 sign-commands	sign.txt	/*sign-commands*
 sign-functions	usr_41.txt	/*sign-functions*
+sign-functions-details	sign.txt	/*sign-functions-details*
 sign-group	sign.txt	/*sign-group*
 sign-identifier	sign.txt	/*sign-identifier*
 sign-intro	sign.txt	/*sign-intro*
 sign-priority	sign.txt	/*sign-priority*
 sign-support	sign.txt	/*sign-support*
 sign.txt	sign.txt	/*sign.txt*
-sign_define()	eval.txt	/*sign_define()*
-sign_getdefined()	eval.txt	/*sign_getdefined()*
-sign_getplaced()	eval.txt	/*sign_getplaced()*
-sign_jump()	eval.txt	/*sign_jump()*
-sign_place()	eval.txt	/*sign_place()*
-sign_placelist()	eval.txt	/*sign_placelist()*
-sign_undefine()	eval.txt	/*sign_undefine()*
-sign_unplace()	eval.txt	/*sign_unplace()*
-sign_unplacelist()	eval.txt	/*sign_unplacelist()*
+sign_define()	sign.txt	/*sign_define()*
+sign_getdefined()	sign.txt	/*sign_getdefined()*
+sign_getplaced()	sign.txt	/*sign_getplaced()*
+sign_jump()	sign.txt	/*sign_jump()*
+sign_place()	sign.txt	/*sign_place()*
+sign_placelist()	sign.txt	/*sign_placelist()*
+sign_undefine()	sign.txt	/*sign_undefine()*
+sign_unplace()	sign.txt	/*sign_unplace()*
+sign_unplacelist()	sign.txt	/*sign_unplacelist()*
 signs	sign.txt	/*signs*
 simple-change	change.txt	/*simple-change*
 simplify()	eval.txt	/*simplify()*
@@ -9357,29 +9363,32 @@
 terminal.txt	terminal.txt	/*terminal.txt*
 terminfo	term.txt	/*terminfo*
 termresponse-variable	eval.txt	/*termresponse-variable*
+test-functions	testing.txt	/*test-functions*
 test-functions	usr_41.txt	/*test-functions*
-test_alloc_fail()	eval.txt	/*test_alloc_fail()*
-test_autochdir()	eval.txt	/*test_autochdir()*
-test_feedinput()	eval.txt	/*test_feedinput()*
-test_garbagecollect_now()	eval.txt	/*test_garbagecollect_now()*
-test_garbagecollect_soon()	eval.txt	/*test_garbagecollect_soon()*
-test_getvalue()	eval.txt	/*test_getvalue()*
-test_ignore_error()	eval.txt	/*test_ignore_error()*
-test_null_blob()	eval.txt	/*test_null_blob()*
-test_null_channel()	eval.txt	/*test_null_channel()*
-test_null_dict()	eval.txt	/*test_null_dict()*
-test_null_job()	eval.txt	/*test_null_job()*
-test_null_list()	eval.txt	/*test_null_list()*
-test_null_partial()	eval.txt	/*test_null_partial()*
-test_null_string()	eval.txt	/*test_null_string()*
-test_option_not_set()	eval.txt	/*test_option_not_set()*
-test_override()	eval.txt	/*test_override()*
-test_refcount()	eval.txt	/*test_refcount()*
-test_scrollbar()	eval.txt	/*test_scrollbar()*
-test_setmouse()	eval.txt	/*test_setmouse()*
-test_settime()	eval.txt	/*test_settime()*
-testing	eval.txt	/*testing*
+test_alloc_fail()	testing.txt	/*test_alloc_fail()*
+test_autochdir()	testing.txt	/*test_autochdir()*
+test_feedinput()	testing.txt	/*test_feedinput()*
+test_garbagecollect_now()	testing.txt	/*test_garbagecollect_now()*
+test_garbagecollect_soon()	testing.txt	/*test_garbagecollect_soon()*
+test_getvalue()	testing.txt	/*test_getvalue()*
+test_ignore_error()	testing.txt	/*test_ignore_error()*
+test_null_blob()	testing.txt	/*test_null_blob()*
+test_null_channel()	testing.txt	/*test_null_channel()*
+test_null_dict()	testing.txt	/*test_null_dict()*
+test_null_job()	testing.txt	/*test_null_job()*
+test_null_list()	testing.txt	/*test_null_list()*
+test_null_partial()	testing.txt	/*test_null_partial()*
+test_null_string()	testing.txt	/*test_null_string()*
+test_option_not_set()	testing.txt	/*test_option_not_set()*
+test_override()	testing.txt	/*test_override()*
+test_refcount()	testing.txt	/*test_refcount()*
+test_scrollbar()	testing.txt	/*test_scrollbar()*
+test_setmouse()	testing.txt	/*test_setmouse()*
+test_settime()	testing.txt	/*test_settime()*
+testing	testing.txt	/*testing*
+testing-support	testing.txt	/*testing-support*
 testing-variable	eval.txt	/*testing-variable*
+testing.txt	testing.txt	/*testing.txt*
 tex-cchar	syntax.txt	/*tex-cchar*
 tex-cole	syntax.txt	/*tex-cole*
 tex-conceal	syntax.txt	/*tex-conceal*
diff --git a/runtime/doc/testing.txt b/runtime/doc/testing.txt
new file mode 100644
index 0000000..7692d80
--- /dev/null
+++ b/runtime/doc/testing.txt
@@ -0,0 +1,317 @@
+*testing.txt*	For Vim version 8.1.  Last change: 2019 Jul 21
+
+
+		  VIM REFERENCE MANUAL	  by Bram Moolenaar
+
+
+Testing Vim and Vim script			*testing-support*
+
+Expression evaluation is explained in |eval.txt|.  This file goes into details
+about writing tests in Vim script.  This can be used for testing Vim itself
+and for testing plugins.
+
+1. Testing Vim				|testing|
+2. Test functions			|test-functions|
+3. Assert funtions			|assert-functions|
+
+==============================================================================
+1. Testing Vim						*testing*
+
+Vim can be tested after building it, usually with "make test".
+The tests are located in the directory "src/testdir".
+
+There are several types of tests added over time:
+	test33.in		oldest, don't add any of these
+	test_something.in	old style tests
+	test_something.vim	new style tests
+
+						*new-style-testing*
+New tests should be added as new style tests.  These use functions such as
+|assert_equal()| to keep the test commands and the expected result in one
+place.
+						*old-style-testing*
+In some cases an old style test needs to be used.  E.g. when testing Vim
+without the |+eval| feature.
+
+Find more information in the file src/testdir/README.txt.
+
+==============================================================================
+2. Test functions				*test-functions*
+
+test_alloc_fail({id}, {countdown}, {repeat})		*test_alloc_fail()*
+		This is for testing: If the memory allocation with {id} is
+		called, then decrement {countdown}, and when it reaches zero
+		let memory allocation fail {repeat} times.  When {repeat} is
+		smaller than one it fails one time.
+
+
+test_autochdir()					*test_autochdir()*
+		Set a flag to enable the effect of 'autochdir' before Vim
+		startup has finished.
+
+
+test_feedinput({string})				*test_feedinput()*
+		Characters in {string} are queued for processing as if they
+		were typed by the user. This uses a low level input buffer.
+		This function works only when with |+unix| or GUI is running.
+
+
+test_garbagecollect_now()			 *test_garbagecollect_now()*
+		Like garbagecollect(), but executed right away.  This must
+		only be called directly to avoid any structure to exist
+		internally, and |v:testing| must have been set before calling
+		any function.
+
+
+test_garbagecollect_soon()			 *test_garbagecollect_soon()*
+		Set the flag to call the garbagecollector as if in the main
+		loop.  Only to be used in tests.
+
+
+test_getvalue({name})					*test_getvalue()*
+		Get the value of an internal variable.  These values for
+		{name} are supported:
+			need_fileinfo
+
+
+test_ignore_error({expr})			 *test_ignore_error()*
+		Ignore any error containing {expr}.  A normal message is given
+		instead.
+		This is only meant to be used in tests, where catching the
+		error with try/catch cannot be used (because it skips over
+		following code).
+		{expr} is used literally, not as a pattern.
+		When the {expr} is the string "RESET" then the list of ignored
+		errors is made empty.
+
+
+test_null_blob()					*test_null_blob()*
+		Return a |Blob| that is null. Only useful for testing.
+
+
+test_null_channel()					*test_null_channel()*
+		Return a |Channel| that is null. Only useful for testing.
+		{only available when compiled with the +channel feature}
+
+
+test_null_dict()					*test_null_dict()*
+		Return a |Dict| that is null. Only useful for testing.
+
+
+test_null_job()						*test_null_job()*
+		Return a |Job| that is null. Only useful for testing.
+		{only available when compiled with the +job feature}
+
+
+test_null_list()					*test_null_list()*
+		Return a |List| that is null. Only useful for testing.
+
+
+test_null_partial()					*test_null_partial()*
+		Return a |Partial| that is null. Only useful for testing.
+
+
+test_null_string()					*test_null_string()*
+		Return a |String| that is null. Only useful for testing.
+
+
+test_option_not_set({name})				*test_option_not_set()*
+		Reset the flag that indicates option {name} was set.  Thus it
+		looks like it still has the default value. Use like this: >
+			set ambiwidth=double
+			call test_option_not_set('ambiwidth')
+<		Now the 'ambiwidth' option behaves like it was never changed,
+		even though the value is "double".
+		Only to be used for testing!
+
+
+test_override({name}, {val})				*test_override()*
+		Overrides certain parts of Vim's internal processing to be able
+		to run tests. Only to be used for testing Vim!
+		The override is enabled when {val} is non-zero and removed
+		when {val} is zero.
+		Current supported values for name are:
+
+		name	     effect when {val} is non-zero ~
+		redraw       disable the redrawing() function
+		redraw_flag  ignore the RedrawingDisabled flag
+		char_avail   disable the char_avail() function
+		starting     reset the "starting" variable, see below
+		nfa_fail     makes the NFA regexp engine fail to force a
+			     fallback to the old engine
+		no_query_mouse  do not query the mouse position for "dec"
+				terminals
+		no_wait_return	set the "no_wait_return" flag.  Not restored
+				with "ALL".
+		ALL	     clear all overrides ({val} is not used)
+
+		"starting" is to be used when a test should behave like
+		startup was done.  Since the tests are run by sourcing a
+		script the "starting" variable is non-zero. This is usually a
+		good thing (tests run faster), but sometimes changes behavior
+		in a way that the test doesn't work properly.
+		When using: >
+			call test_override('starting', 1)
+<		The value of "starting" is saved.  It is restored by: >
+			call test_override('starting', 0)
+
+
+test_refcount({expr})					*test_refcount()*
+		Return the reference count of {expr}.  When {expr} is of a
+		type that does not have a reference count, returns -1.  Only
+		to be used for testing.
+
+
+test_scrollbar({which}, {value}, {dragging})		*test_scrollbar()*
+		Pretend using scrollbar {which} to move it to position
+		{value}.  {which} can be:
+			left	Left scrollbar of the current window
+			right	Right scrollbar of the current window
+			hor	Horizontal scrollbar
+
+		For the vertical scrollbars {value} can be 1 to the
+		line-count of the buffer.  For the horizontal scrollbar the
+		{value} can be between 1 and the maximum line length, assuming
+		'wrap' is not set.
+
+		When {dragging} is non-zero it's like dragging the scrollbar,
+		otherwise it's like clicking in the scrollbar.
+		Only works when the {which} scrollbar actually exists,
+		obviously only when using the GUI.
+
+
+test_setmouse({row}, {col})				*test_setmouse()*
+		Set the mouse position to be used for the next mouse action.
+		{row} and {col} are one based.
+		For example: >
+			call test_setmouse(4, 20)
+			call feedkeys("\<LeftMouse>", "xt")
+
+
+test_settime({expr})					*test_settime()*
+		Set the time Vim uses internally.  Currently only used for
+		timestamps in the history, as they are used in viminfo, and
+		for undo.
+		Using a value of 1 makes Vim not sleep after a warning or
+		error message.
+		{expr} must evaluate to a number.  When the value is zero the
+		normal behavior is restored.
+
+==============================================================================
+3. Assert functions				*assert-functions*
+
+
+assert_beeps({cmd})					*assert_beeps()*
+		Run {cmd} and add an error message to |v:errors| if it does
+		NOT produce a beep or visual bell.
+		Also see |assert_fails()| and |assert-return|.
+
+							*assert_equal()*
+assert_equal({expected}, {actual} [, {msg}])
+		When {expected} and {actual} are not equal an error message is
+		added to |v:errors| and 1 is returned.  Otherwise zero is
+		returned |assert-return|.
+		There is no automatic conversion, the String "4" is different
+		from the Number 4.  And the number 4 is different from the
+		Float 4.0.  The value of 'ignorecase' is not used here, case
+		always matters.
+		When {msg} is omitted an error in the form "Expected
+		{expected} but got {actual}" is produced.
+		Example: >
+	assert_equal('foo', 'bar')
+<		Will result in a string to be added to |v:errors|:
+	test.vim line 12: Expected 'foo' but got 'bar' ~
+
+							*assert_equalfile()*
+assert_equalfile({fname-one}, {fname-two})
+		When the files {fname-one} and {fname-two} do not contain
+		exactly the same text an error message is added to |v:errors|.
+		Also see |assert-return|.
+		When {fname-one} or {fname-two} does not exist the error will
+		mention that.
+		Mainly useful with |terminal-diff|.
+
+assert_exception({error} [, {msg}])			*assert_exception()*
+		When v:exception does not contain the string {error} an error
+		message is added to |v:errors|.  Also see |assert-return|.
+		This can be used to assert that a command throws an exception.
+		Using the error number, followed by a colon, avoids problems
+		with translations: >
+			try
+			  commandthatfails
+			  call assert_false(1, 'command should have failed')
+			catch
+			  call assert_exception('E492:')
+			endtry
+
+assert_fails({cmd} [, {error} [, {msg}]])			*assert_fails()*
+		Run {cmd} and add an error message to |v:errors| if it does
+		NOT produce an error.  Also see |assert-return|.
+		When {error} is given it must match in |v:errmsg|.
+		Note that beeping is not considered an error, and some failing
+		commands only beep.  Use |assert_beeps()| for those.
+
+assert_false({actual} [, {msg}])				*assert_false()*
+		When {actual} is not false an error message is added to
+		|v:errors|, like with |assert_equal()|.
+		Also see |assert-return|.
+		A value is false when it is zero. When {actual} is not a
+		number the assert fails.
+		When {msg} is omitted an error in the form
+		"Expected False but got {actual}" is produced.
+
+assert_inrange({lower}, {upper}, {actual} [, {msg}])	 *assert_inrange()*
+		This asserts number and |Float| values.  When {actual}  is lower
+		than {lower} or higher than {upper} an error message is added
+		to |v:errors|.  Also see |assert-return|.
+		When {msg} is omitted an error in the form
+		"Expected range {lower} - {upper}, but got {actual}" is
+		produced.
+
+								*assert_match()*
+assert_match({pattern}, {actual} [, {msg}])
+		When {pattern} does not match {actual} an error message is
+		added to |v:errors|.  Also see |assert-return|.
+
+		{pattern} is used as with |=~|: The matching is always done
+		like 'magic' was set and 'cpoptions' is empty, no matter what
+		the actual value of 'magic' or 'cpoptions' is.
+
+		{actual} is used as a string, automatic conversion applies.
+		Use "^" and "$" to match with the start and end of the text.
+		Use both to match the whole text.
+
+		When {msg} is omitted an error in the form
+		"Pattern {pattern} does not match {actual}" is produced.
+		Example: >
+	assert_match('^f.*o$', 'foobar')
+<		Will result in a string to be added to |v:errors|:
+	test.vim line 12: Pattern '^f.*o$' does not match 'foobar' ~
+
+							*assert_notequal()*
+assert_notequal({expected}, {actual} [, {msg}])
+		The opposite of `assert_equal()`: add an error message to
+		|v:errors| when {expected} and {actual} are equal.
+		Also see |assert-return|.
+
+							*assert_notmatch()*
+assert_notmatch({pattern}, {actual} [, {msg}])
+		The opposite of `assert_match()`: add an error message to
+		|v:errors| when {pattern} matches {actual}.
+		Also see |assert-return|.
+
+assert_report({msg})					*assert_report()*
+		Report a test failure directly, using {msg}.
+		Always returns one.
+
+assert_true({actual} [, {msg}])				*assert_true()*
+		When {actual} is not true an error message is added to
+		|v:errors|, like with |assert_equal()|.
+		Also see |assert-return|.
+		A value is TRUE when it is a non-zero number.  When {actual}
+		is not a number the assert fails.
+		When {msg} is omitted an error in the form "Expected True but
+		got {actual}" is produced.
+
+
+ vim:tw=78:ts=8:noet:ft=help:norl:
diff --git a/runtime/doc/textprop.txt b/runtime/doc/textprop.txt
index 8beae93..185a60b 100644
--- a/runtime/doc/textprop.txt
+++ b/runtime/doc/textprop.txt
@@ -1,4 +1,4 @@
-*textprop.txt*  For Vim version 8.1.  Last change: 2019 Jun 13
+*textprop.txt*  For Vim version 8.1.  Last change: 2019 Jul 20
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -116,6 +116,202 @@
 prop_remove({props} [, {lnum} [, {lnum-end}]])
 					remove a text property
 
+						*prop_add()* *E965*
+prop_add({lnum}, {col}, {props})
+		Attach a text property at position {lnum}, {col}.  {col} is
+		counted in bytes, use one for the first column.
+		If {lnum} is invalid an error is given. *E966*
+		If {col} is invalid an error is given. *E964*
+
+		{props} is a dictionary with these fields:
+		   length	length of text in bytes, can only be used
+				for a property that does not continue in
+				another line; can be zero
+		   end_lnum	line number for the end of text
+		   end_col	column just after the text; not used when
+				"length" is present; when {col} and "end_col"
+				are equal, and "end_lnum" is omitted or equal
+				to {lnum}, this is a zero-width text property
+		   bufnr	buffer to add the property to; when omitted
+				the current buffer is used
+		   id		user defined ID for the property; when omitted
+				zero is used
+		   type		name of the text property type
+		All fields except "type" are optional.
+
+		It is an error when both "length" and "end_lnum" or "end_col"
+		are given.  Either use "length" or "end_col" for a property
+		within one line, or use "end_lnum" and "end_col" for a
+		property that spans more than one line.
+		When neither "length" nor "end_col" are given the property
+		will be zero-width.  That means it will not be highlighted but
+		will move with the text, as a kind of mark.
+		The property can end exactly at the last character of the
+		text, or just after it.  In the last case, if text is appended
+		to the line, the text property size will increase, also when
+		the property type does not have "end_incl" set.
+
+		"type" will first be looked up in the buffer the property is
+		added to. When not found, the global property types are used.
+		If not found an error is given.
+
+		See |text-properties| for information about text properties.
+
+
+prop_clear({lnum} [, {lnum-end} [, {props}]])		*prop_clear()*
+		Remove all text properties from line {lnum}.
+		When {lnum-end} is given, remove all text properties from line
+		{lnum} to {lnum-end} (inclusive).
+
+		When {props} contains a "bufnr" item use this buffer,
+		otherwise use the current buffer.
+
+		See |text-properties| for information about text properties.
+
+							*prop_find()*
+prop_find({props} [, {direction}])
+		NOT IMPLEMENTED YET
+		Search for a text property as specified with {props}:
+		   id		property with this ID
+		   type		property with this type name
+		   bufnr	buffer to search in; when present a
+				start position with "lnum" and "col"
+				must be given; when omitted the
+				current buffer is used
+		   lnum		start in this line (when omitted start
+				at the cursor)
+		   col		start at this column (when omitted
+				and "lnum" is given: use column 1,
+				otherwise start at the cursor)
+		   skipstart	do not look for a match at the start
+				position
+
+		{direction} can be "f" for forward and "b" for backward.  When
+		omitted forward search is performed.
+
+		If a match is found then a Dict is returned with the entries
+		as with prop_list(), and additionally an "lnum" entry.
+		If no match is found then an empty Dict is returned.
+
+		See |text-properties| for information about text properties.
+
+
+prop_list({lnum} [, {props}])				*prop_list()*
+		Return a List with all text properties in line {lnum}.
+
+		When {props} contains a "bufnr" item, use this buffer instead
+		of the current buffer.
+
+		The properties are ordered by starting column and priority.
+		Each property is a Dict with these entries:
+		   col		starting column
+		   length	length in bytes, one more if line break is
+				included
+		   id		property ID
+		   type		name of the property type, omitted if
+				the type was deleted
+		   start	when TRUE property starts in this line
+		   end		when TRUE property ends in this line
+
+		When "start" is zero the property started in a previous line,
+		the current one is a continuation.
+		When "end" is zero the property continues in the next line.
+		The line break after this line is included.
+
+		See |text-properties| for information about text properties.
+
+
+						*prop_remove()* *E968*
+prop_remove({props} [, {lnum} [, {lnum-end}]])
+		Remove a matching text property from line {lnum}.  When
+		{lnum-end} is given, remove matching text properties from line
+		{lnum} to {lnum-end} (inclusive).
+		When {lnum} is omitted remove matching text properties from
+		all lines.
+
+		{props} is a dictionary with these fields:
+		   id		remove text properties with this ID
+		   type		remove text properties with this type name
+		   bufnr	use this buffer instead of the current one
+		   all		when TRUE remove all matching text properties,
+				not just the first one
+		A property matches when either "id" or "type" matches.
+		If buffer "bufnr" does not exist you get an error message.
+		If buffer "bufnr" is not loaded then nothing happens.
+
+		Returns the number of properties that were removed.
+
+		See |text-properties| for information about text properties.
+
+
+prop_type_add({name}, {props})		*prop_type_add()* *E969* *E970*
+		Add a text property type {name}.  If a property type with this
+		name already exists an error is given.
+		{props} is a dictionary with these optional fields:
+		   bufnr	define the property only for this buffer; this
+				avoids name collisions and automatically
+				clears the property types when the buffer is
+				deleted.
+		   highlight	name of highlight group to use
+		   priority	when a character has multiple text
+				properties the one with the highest priority
+				will be used; negative values can be used, the
+				default priority is zero
+		   combine	when TRUE combine the highlight with any
+				syntax highlight; when omitted or FALSE syntax
+				highlight will not be used
+		   start_incl	when TRUE inserts at the start position will
+				be included in the text property
+		   end_incl	when TRUE inserts at the end position will be
+				included in the text property
+
+		See |text-properties| for information about text properties.
+
+
+prop_type_change({name}, {props})			*prop_type_change()*
+		Change properties of an existing text property type.  If a
+		property with this name does not exist an error is given.
+		The {props} argument is just like |prop_type_add()|.
+
+		See |text-properties| for information about text properties.
+
+
+prop_type_delete({name} [, {props}])			*prop_type_delete()*
+		Remove the text property type {name}.  When text properties
+		using the type {name} are still in place, they will not have
+		an effect and can no longer be removed by name.
+
+		{props} can contain a "bufnr" item.  When it is given, delete
+		a property type from this buffer instead of from the global
+		property types.
+
+		When text property type {name} is not found there is no error.
+
+		See |text-properties| for information about text properties.
+
+
+prop_type_get([{name} [, {props}])			*prop_type_get()*
+		Returns the properties of property type {name}.  This is a
+		dictionary with the same fields as was given to
+		prop_type_add().
+		When the property type {name} does not exist, an empty
+		dictionary is returned.
+
+		{props} can contain a "bufnr" item.  When it is given, use
+		this buffer instead of the global property types.
+
+		See |text-properties| for information about text properties.
+
+
+prop_type_list([{props}])				*prop_type_list()*
+		Returns a list with all property type names.
+
+		{props} can contain a "bufnr" item.  When it is given, use
+		this buffer instead of the global property types.
+
+		See |text-properties| for information about text properties.
+
+
 ==============================================================================
 3. When text changes				*text-prop-changes*