Various changes
diff --git a/runtime/doc/change.txt b/runtime/doc/change.txt
index 2e56ccb..63461ee 100644
--- a/runtime/doc/change.txt
+++ b/runtime/doc/change.txt
@@ -1,4 +1,4 @@
-*change.txt* For Vim version 7.0aa. Last change: 2004 May 08
+*change.txt* For Vim version 7.0aa. Last change: 2004 Jun 15
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -963,8 +963,9 @@
1. Unnamed register "" *quote_quote* *quotequote*
Vim fills this register with text deleted with the "d", "c", "s", "x" commands
or copied with the yank "y" command, regardless of whether or not a specific
-register was used (e.g. "xdd). An exception is the '_' register: "_dd does
-not store the deleted text in any register. Vim uses the contents of this
+register was used (e.g. "xdd). This is like the unnamed register is pointing
+to the last used register. An exception is the '_' register: "_dd does not
+store the deleted text in any register. Vim uses the contents of this
register for any put command (p or P) which does not specify a register.
Additionally you can access it with the name '"'. This means you have to type
two double quotes. Writing to the "" register writes to register "0.
diff --git a/runtime/doc/editing.txt b/runtime/doc/editing.txt
index e25c34a..827f780 100644
--- a/runtime/doc/editing.txt
+++ b/runtime/doc/editing.txt
@@ -1,4 +1,4 @@
-*editing.txt* For Vim version 7.0aa. Last change: 2004 Apr 28
+*editing.txt* For Vim version 7.0aa. Last change: 2004 Jun 14
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -338,6 +338,7 @@
backticks must be around the whole item. It is not possible to have text
directly before the first or just after the last backtick.
+ *`=*
You can have the backticks expanded as a Vim expression, instead of
an external command, by using the syntax `={expr}` e.g. >
:let foo='bar'
diff --git a/runtime/doc/fold.txt b/runtime/doc/fold.txt
index cbe1237..00f5474 100644
--- a/runtime/doc/fold.txt
+++ b/runtime/doc/fold.txt
@@ -1,4 +1,4 @@
-*fold.txt* For Vim version 7.0aa. Last change: 2004 May 20
+*fold.txt* For Vim version 7.0aa. Last change: 2004 Jun 14
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -564,7 +564,7 @@
deletes the whole closed fold under the cursor.
For Ex commands the range is adjusted to always start at the first line of a
-fold and end at the last line of a fold. Thus this command: >
+closed fold and end at the last line of a closed fold. Thus this command: >
:s/foo/bar/g
when used with the cursor on a closed fold, will replace "foo" with "bar" in
all lines of the fold.
diff --git a/runtime/doc/gui.txt b/runtime/doc/gui.txt
index 430a3eb..2e59cc0 100644
--- a/runtime/doc/gui.txt
+++ b/runtime/doc/gui.txt
@@ -1,4 +1,4 @@
-*gui.txt* For Vim version 7.0aa. Last change: 2004 Jun 02
+*gui.txt* For Vim version 7.0aa. Last change: 2004 Jun 15
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -932,6 +932,22 @@
else
echo "Boring old console"
endif
+< *setting-guifont*
+- When you use the same vimrc file on various systems, you can use something
+ like this to set options specifically for each type of GUI: >
+
+ if has("gui_running")
+ if has("gui_gtk2")
+ :set guifont=Luxi\ Mono\ 12
+ elseif has("gui_kde")
+ :set guifont=Luxi\ Mono/12/-1/5/50/0/0/0/1/0
+ elseif has("x11")
+ " Also for GTK 1
+ :set guifont=*-lucidatypewriter-medium-r-normal-*-*-180-*-*-m-*-*
+ elseif has("gui_win32")
+ :set guifont=Luxi_Mono:h12:cANSI
+ endif
+ endif
==============================================================================
7. Shell Commands *gui-shell*
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index 5dfb582..0d48e98 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -1,4 +1,4 @@
-*options.txt* For Vim version 7.0aa. Last change: 2004 Jun 08
+*options.txt* For Vim version 7.0aa. Last change: 2004 Jun 15
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -2795,31 +2795,42 @@
the font cannot be found you will get an error message. To try other
font names a list can be specified, font names separated with commas.
The first valid font is used.
+
When 'guifontset' is not empty, 'guifont' is not used.
+
Spaces after a comma are ignored. To include a comma in a font name
precede it with a backslash. Setting an option requires an extra
backslash before a space and a backslash. See also
|option-backslash|. For example: >
:set guifont=Screen15,\ 7x13,font\\,with\\,commas
-< will make vim try to use the font "Screen15" first, and if it fails it
+< will make Vim try to use the font "Screen15" first, and if it fails it
will try to use "7x13" and then "font,with,commas" instead.
+
+ If none of the fonts can be loaded, Vim will keep the current setting.
+ If an empty font list is given, Vim will try using other resource
+ settings (for X, it will use the Vim.font resource), and finally it
+ will try some builtin default which should always be there ("7x13" in
+ the case of X). The font names given should be "normal" fonts. Vim
+ will try to find the related bold and italic fonts.
+
+ For Win32, GTK and Photon only: >
+ :set guifont=*
+< will bring up a font requester, where you can pick the font you want.
+
+ The font name depends on the GUI used. See |setting-guifont| for a
+ way to set 'guifont' for various systems.
+
For the GTK+ 2 GUI the font name looks like this: >
:set guifont=Andale\ Mono\ 11
< That's all. XLFDs are no longer accepted.
*E236*
Note that the fonts must be mono-spaced (all characters have the same
- width).
+ width). An exception is GTK 2: all fonts are accepted, but
+ mono-spaced fonts look best.
+
To preview a font on X11, you might be able to use the "xfontsel"
program. The "xlsfonts" program gives a list of all available fonts.
- For Win32, GTK and Photon only: >
- :set guifont=*
-< will bring up a font requester, where you can pick the font you want.
- If none of the fonts can be loaded, vim will keep the current setting.
- If an empty font list is given, vim will try using other resource
- settings (for X, it will use the Vim.font resource), and finally it
- will try some builtin default which should always be there ("7x13" in
- the case of X). The font names given should be "normal" fonts. Vim
- will try to find the related bold and italic fonts.
+
For the Win32 GUI *E244* *E245*
- takes these options in the font name:
hXX - height is XX (points, can be floating-point)
@@ -2913,7 +2924,7 @@
global
{not in Vi}
{only available when compiled with GUI enabled}
- This option only has an effect in the GUI version of vim. It is a
+ This option only has an effect in the GUI version of Vim. It is a
sequence of letters which describes what components and options of the
GUI should be used.
To avoid problems with flags that are added in the future, use the
@@ -4484,10 +4495,11 @@
system('lpr' . (&printdevice == '' ? '' : ' -P' . &printdevice)
. ' ' . v:fname_in) . delete(v:fname_in) + v:shell_error
<
- On MS-Windows machines the default is to copy the file to the
- currently specified printdevice: >
+ On MS-Dos, MS-Windows and OS/2 machines the default is to copy the
+ file to the currently specified printdevice: >
- system('copy' . ' ' . v:fname_in . ' "' . &printdevice . '"')
+ system('copy' . ' ' . v:fname_in . (&printdevice == ''
+ ? ' LPT1:' : (' \"' . &printdevice . '\"')))
. delete(v:fname_in)
<
On VMS machines the default is to send the file to either the default
diff --git a/runtime/doc/starting.txt b/runtime/doc/starting.txt
index 160bcb9..f9e1301 100644
--- a/runtime/doc/starting.txt
+++ b/runtime/doc/starting.txt
@@ -1,4 +1,4 @@
-*starting.txt* For Vim version 7.0aa. Last change: 2004 May 28
+*starting.txt* For Vim version 7.0aa. Last change: 2004 Jun 15
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -1019,6 +1019,11 @@
To change it later, use a ":let" command like this: >
:let $VIMRUNTIME = "/home/piet/vim/vim54"
+In case you need the value of $VIMRUNTIME in a shell (e.g., for a script that
+greps in the help files) you might be able to use this: >
+
+ VIMRUNTIME=`vim -e -T dumb --cmd 'exe "set t_cm=\<C-M>"|echo $VIMRUNTIME|quit' | tr -d '\015' `
+
==============================================================================
6. Suspending *suspend*
diff --git a/runtime/doc/syntax.txt b/runtime/doc/syntax.txt
index db32235..5bd9723 100644
--- a/runtime/doc/syntax.txt
+++ b/runtime/doc/syntax.txt
@@ -1,4 +1,4 @@
-*syntax.txt* For Vim version 7.0aa. Last change: 2004 Jun 09
+*syntax.txt* For Vim version 7.0aa. Last change: 2004 Jun 15
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -1348,7 +1348,7 @@
original one and then adds the code to highlight functions.
In java 1.1 the functions System.out.println() and System.err.println() should
-only be used for debugging. Therefor it is possible to highlight debugging
+only be used for debugging. Therefore it is possible to highlight debugging
statements differently. To do this you must add the following definition in
your startup file: >
:let java_highlight_debug=1
diff --git a/runtime/doc/tags b/runtime/doc/tags
index 9a77ade..25f0a20 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -3844,6 +3844,7 @@
`. motion.txt /*`.*
`0 motion.txt /*`0*
`< motion.txt /*`<*
+`= editing.txt /*`=*
`> motion.txt /*`>*
`A motion.txt /*`A*
`[ motion.txt /*`[*
@@ -4018,6 +4019,7 @@
bufwinnr() eval.txt /*bufwinnr()*
bug-fixes-5 version5.txt /*bug-fixes-5*
bug-fixes-6 version6.txt /*bug-fixes-6*
+bug-fixes-7 version7.txt /*bug-fixes-7*
bug-reports intro.txt /*bug-reports*
bugreport.vim intro.txt /*bugreport.vim*
bugs intro.txt /*bugs*
@@ -4166,6 +4168,7 @@
compatible-default starting.txt /*compatible-default*
compile-changes-5 version5.txt /*compile-changes-5*
compile-changes-6 version6.txt /*compile-changes-6*
+compile-changes-7 version7.txt /*compile-changes-7*
compiler-manx quickfix.txt /*compiler-manx*
compiler-pyunit quickfix.txt /*compiler-pyunit*
compiler-select quickfix.txt /*compiler-select*
@@ -5056,12 +5059,14 @@
improved-viminfo version5.txt /*improved-viminfo*
improvements-5 version5.txt /*improvements-5*
improvements-6 version6.txt /*improvements-6*
+improvements-7 version7.txt /*improvements-7*
inactive-buffer windows.txt /*inactive-buffer*
include-search tagsrch.txt /*include-search*
inclusive motion.txt /*inclusive*
incomp-small-6 version6.txt /*incomp-small-6*
incompatible-5 version5.txt /*incompatible-5*
incompatible-6 version6.txt /*incompatible-6*
+incompatible-7 version7.txt /*incompatible-7*
indent() eval.txt /*indent()*
indent-expression indent.txt /*indent-expression*
indent.txt indent.txt /*indent.txt*
@@ -5378,6 +5383,7 @@
network pi_netrw.txt /*network*
new-5 version5.txt /*new-5*
new-6 version6.txt /*new-6*
+new-7 version7.txt /*new-7*
new-GTK-GUI version5.txt /*new-GTK-GUI*
new-Select-mode version5.txt /*new-Select-mode*
new-View version6.txt /*new-View*
@@ -5387,6 +5393,7 @@
new-color-schemes version6.txt /*new-color-schemes*
new-commands version5.txt /*new-commands*
new-commands-5.4 version5.txt /*new-commands-5.4*
+new-data-types version7.txt /*new-data-types*
new-debug-itf version6.txt /*new-debug-itf*
new-debug-mode version6.txt /*new-debug-mode*
new-diff-mode version6.txt /*new-diff-mode*
@@ -5405,6 +5412,7 @@
new-highlighting version5.txt /*new-highlighting*
new-indent-flex version6.txt /*new-indent-flex*
new-items-6 version6.txt /*new-items-6*
+new-items-7 version7.txt /*new-items-7*
new-line-continuation version5.txt /*new-line-continuation*
new-multi-byte version5.txt /*new-multi-byte*
new-multi-lang version6.txt /*new-multi-lang*
@@ -5794,6 +5802,7 @@
setcmdpos() eval.txt /*setcmdpos()*
setline() eval.txt /*setline()*
setreg() eval.txt /*setreg()*
+setting-guifont gui.txt /*setting-guifont*
setwinvar() eval.txt /*setwinvar()*
sftp pi_netrw.txt /*sftp*
sgml-syntax syntax.txt /*sgml-syntax*
@@ -6387,6 +6396,7 @@
version4.txt version4.txt /*version4.txt*
version5.txt version5.txt /*version5.txt*
version6.txt version6.txt /*version6.txt*
+version7.txt version7.txt /*version7.txt*
vi-differences vi_diff.txt /*vi-differences*
vi: options.txt /*vi:*
vi_diff.txt vi_diff.txt /*vi_diff.txt*
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index c8b9576..00d94c1 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt* For Vim version 7.0aa. Last change: 2004 Jun 13
+*todo.txt* For Vim version 7.0aa. Last change: 2004 Jun 16
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -30,22 +30,241 @@
*known-bugs*
-------------------- Known bugs and current work -----------------------
-GTK2: font dialog uses font size zero when 'guifont' is "Courier". Patch from
-Yasuhiro Matsumoto, 2004 June 8.
+This example doesn't work:
+ :e `=foo . ".c" `
+Inside `` don't use " as the start of a comment.
+Also don't expand % or #.
-Python indent: # aser: still adds extra indent.
+Corrections for docs from A3. Skip ones already done.
For version 7.0:
- Include many PATCHES:
+ 9 Win32 GuI: The print dialog uses a font which doesn't display multi-byte
+ messages. Include patch from Vipin Aravind? Update from Yasuhiro
+ Matsumoto.
+ 8 ":winpos" doesn't work. Patch from Vipin Aravind.
+ 8 Add GTK 2.3 file dialog support. Patch by Grahame Bowland, 2004 Mar 15,
+ but it doesn't use "initdir" or "dflt". (will update patch)
+ 8 On Sinix SYS_NMLN isn't defined. Include patch from Cristiano De
+ Michele. He no longer has such a machine.
+ 8 Add file locking. Lock a file when starting to edit it with flock() or
+ fcntl(). This patch has advisory file locking while reading/writing
+ the file: ~/vim/patches/kahn_file_locking .
+ Do we still want this/
+ 8 Add buffer-local autocommands? Reduces overhead for autocommands that
+ trigger often (inserting a character, switching mode).
+ :au Event <buffer> do-something
+ E.g.:
+ :au BufEnter <buffer> menu enable ...
+ :au BufLeave <buffer> menu disable ...
+ Patch from Yakov Lerner, including test (2004 Jan 7).
+ He'll send updated patch.
+ Autocommands:
+ VimResized - When the Vim window has been resized (SIGWINCH)
+ patch from Yakov Lerner, 2003 July 24.
+ He'll write documentation and send updated patch.
- Include the kvim patch. http://freenux.org/vim/ (Mickael Marchand)
Do not add Qtopia yet, it doesn't work very well.
+ Mickael will update the patch before 21st.
+ --- responses above
+ 7 Make "5dd" on last-but-one-line not delete anything (Vi compatible).
+ Add flag in 'cpoptions' for this. When not present, "2dd" in the last
+ line should delete the last line. Patch from greenx 2002 Apr 11.
+ 8 Accelerators don't work in a dialog. Include patch from Martin Dalecki
+ (Jan 3, tested by David Harrison). Should work with Alt-o then.
+ 7 Use accelerators for the Motif file selection dialog. Patch from
+ Martin Dalecki 2002 Jan 11.
+ 8 Add a few more command names to the menus. Patch from Jiri Brezina
+ (28 feb 2002).
+ 8 Patch to add 'transparency' option. Disadvantage: it's slow. (Eckehard
+ Berns, 2004 May 9) http://ecki.to/vim-icns/TransBack.diff
+ 8 Patches from "Rain Dog" Cucka:
+ - guifont selector (2002 Dec 15)
+ - scrollbar (2002 Dec 8)
+ - Quartz fonts (2002 Dec 8)
+ 7 ATTENTION dialog choices are more logical when "Delete it' appears
+ before "Quit". Patch by Robert Webb, 2004 May 3.
+ 8 Unix: When libcall() fails there is no clear error message. Johannes
+ Zellner has a patch for this.
+ 8 ":hardcopy":
+ - Patch to append CTRL-D to PostScript output (Mike Williams, 2004 Jun
+ 14)
+ - support printing multi-byte characters. Patch from Motonobu
+ Ichimura. New (better) patch from Mike Williams (2004 Jan 20)
+ 9 Merge in ideas from ~/vim/patches/tutor.txt (Gabriel Zachmann)
+ 8 Add patch from Muraoka Taro (Mar 16) to support input method on Mac?
+ - Include flipcase patch: ~/vim/patches/wall.flipcase2 ? Make it work
+ for multi-byte characters.
+ 7 Add patch from Wall for this one ( ~/Mail/oldmail/wall/in.00019 ):
+ 'flipcase' variable: upper/lowercase pairs.
+ Insert comma's between pairs and allow a range, make it look like
+ 'isfname'. E.g. ":set flipcase=a-zA-Z,xX,23-33:143-153". The colon to
+ separate the from and to part is optional.
+ - Win32: add options to print dialog. Patch from Vipin Aravind.
+ - Patch to add highlighting for whitespace. (Tom Schumm, 2003 Jul 5)
+ use the patch that keeps using HLF_8 if HLF_WS has not
+ been given values.
+ Add section in help files for these highlight groups?
+ 8 "fg" and "bg" don't work in an xterm. Get default colors from xterm
+ with an ESC sequence. Ideas in: ~/vim/patches/vikas.xtermcolors .
+ 7 Add "DefaultFG" and "DefaultBG" for the colors of the menu. (Martin
+ Dalecki has a patch for Motif)
+ - Add possibility to highlight specific columns (for Fortran). Or put a
+ line in between columns (e.g. for 'textwidth').
+ Patch to add 'hlcolumn' from Vit Stradal, 2004 May 20.
+ 9 Add cursor-column highlighting. Enable it with 'cursorcolumn' option,
+ set highlighting with "CursorColumn" group. Useful for aligning text.
+ Also cursor-row highlighting. Patch from Yasuhiro Matsumoto for
+ underlining the cursor line, 2004 Mar 24.
+ Alternatie: when 'number' is set highlight the number of the current
+ line.
+ 7 Be able to call a function while passing on a variable number of
+ arguments:
+ :function Foo(abc, ...)
+ : call Bar(a:abc, a:*)
+ Charles Campbell has a patch for this
+ 8 Add ":n" to fnamemodify(): normalize path, remove "../" when possible.
+ Aric Blumer has a patch for this.
+ 8 Add functions:
+ tr(expr, from, to) translate chars (Patch from Ron Aaron, Apr 8
+ 2004)
+ strrep() Repeat a string (patch from Christophe Poucet,
+ 2003 Sep 12, also contains XX)
+ Alt: repeat(expr, count) werkt ook voor lists.
+ mousex() mousey() get position of mouse pointer (patch by Ross
+ Presser)
+ He will send a new patch.
+ Is this really useful?
+ ---
+ multibyteidx(string, idx) Byte index in multi-byte character.
+ Patch by Ilya Sher, 2004 Feb 25
+ menuprop({name}, {idx}, {what})
+ Get menu property of menu {name} item {idx}.
+ menuprop("", 1, "name") returns "File".
+ menuprop("File", 1, "n") returns "nmenu
+ File.Open..." argument.
+ Patch by Ilya Sher, 2004 Apr 22
+ mapname({idx}, mode) return the name of the idx'th mapping.
+ Patch by Ilya Sher, 2004 Mar 4.
+ match({pat}, {string} [,start] [,count]) get index of count'th match
+ Patch by Ilya Sher, 2004 Mar 31
+ find() find file in 'path' (patch from Johannes
+ Zellner 2001 Dec 20)
+ realname() Get user name (first, last, full)
+ user_fullname() patch by Nikolai Weibull, Nov
+ 3 2002)
+ getfperm() file permissions, in form "rwxrwxrwx"
+ (patch from Nikolai Weibull 2003 Jan 13)
+ getftype() "file", "dir", "link", "other"?
+ (patch from Nikolai Weibull 2003 Jan 13)
+ setbufline() set line in any buffer (patch from Yegappan
+ Lakshmanan, 2003 Jan 21)
+ winnr("$") Get number of windows. (patch from Nikolai
+ Weibull 2003 Jan 13) (another patch from
+ Yegappan Lakshmanan, 2003 Aug 31)
+ search() Add optional offset argument.
+ Add 'n' flag. (patch from Nikolai Weibull
+ 2003 Jan 13)
+ confirm() add "flags" argument, with 'v' for vertical
+ layout and 'c' for console dialog. (Haegg)
+ Flemming Madsen has a patch for the 'c' flag
+ (2003 May 13)
+ system({cmd}, {expr}) Filter {expr} through the shell command
+ {cmd} and return the result.
+ (Patch from Yegappan Lakshmanan)
+ raisewin() raise gvim window (see HierAssist patch for
+ Tcl implementation ~/vim/HierAssist/ )
+ gettext() Translate a message. (Patch from Yasuhiro
+ Matsumoto) How to get the messages into the
+ .po files?
+ 7 Add "nbsp" in 'listchars'? Patch from David Blanchet, 2003 Jul 28.
+ 7 Add patch from Benoit Cerrina to integrate Vim and Perl functions
+ better. Now also works for Ruby (2001 Nov 10)
+ 7 Add 'taglistfiles' option, show file name and type when listing matching
+ tags name with CTRL-D completion. Patch from Yegappan Lakshmanan.
+ 7 Motif: use the menu font consistently. Patch from Martin Dalecki 2002
+ Jan 11.
+ - Motif: add 3D shading for the menu entries? Patch from Martin Dalecki.
+ 8 Add expression-expansion, so that the user can define his own kind of
+ completion. Patch from Taro Muraoka, 2003 Aug 26.
+ 7 Completion of network shares, patch by Yasuhiro Matsumoto.
+ 9 When 'autoindent' is set, hitting <CR> twice, while there is text after
+ the cursor, doesn't delete the autoindent in the resulting blank line.
+ (Rich Wales) This is Vi compatible, but it looks like a bug. Rich has
+ a suggestion for a patch to fix this.
+ e-mail to Rich bounced.
+ 7 Make ":startinsert" command work directly for functions and scripts?
+ Also make it possible to append (it's difficult at end of line).
+ And add ":startreplace" (patch by Charles Campbell, 2004 Jan 9,
+ http://www.erols.com/astronaut/vim/index.html#Patch)
+ 8 Text objects: Add "a'" and 'a"': a single or double quoted string.
+ (Tim Chase) Patch from Taro Muraoka (2003 Dec 16).
+ 7 For Visual mode: Command to do a search for the string in the marked
+ area. Only when fewer than two lines. Use "g/" and "gb". Patch from
+ Yegappan Lakshmanan.
+ 7 When 'rightleft' is set, the search pattern should be displayed right
+ to left as well? See patch of Dec 26. (Nadim Shaikli)
+ 8 Add patch from Charles Campbell to have ":0file!" remove the name of
+ the current buffer. (2003 June 17)
+ 8 Make it possible to delete marks. Charles Campbell has a patch that
+ does this with the markclear() function (2004 Jan 9). And the
+ ":delmark" command (2004 Feb 9)
+ 7 Win32: Add patch for 5-button mouse. (Michael Geddes 2001 Nov 26)
+ 8 Lock all used memory so that it doesn't get swapped to disk (uncrypted).
+ Patch by Jason Holt, 2003 May 23.
+ 7 Support a stronger encryption. Jason Holt implemented AES (May 6 2003).
+ 7 Add ! register, for shell commands. (patch from Grenie)
+ 7 Add the MzScheme interface. Patch on http://iamphet.nm.ru/scheme/
+ (Sergey Khorev)
+ 8 Make 'statusline' local, so that each window can have a different
+ value. But should it also be local to a buffer? (Yegappan Lakshmanan
+ has a patch, 2002 feb 15)
+ 8 In the gzip plugin, also recognize *.gz.orig, *.gz.bak, etc. Like it's
+ done for filetype detection. Patch from Walter Briscoe, 2003 Jul 1.
+ 7 Add a "-@ filelist" argument: read file names from a file. (David
+ Kotchan has a patch for it)
+ 8 Add term entries for function keys on xterm with alt and ctrl (new in
+ pl 94). E.g., Control adds ";5" in "<Esc>[20;5~". Find a generic way
+ to prepend a modifier in console mode, to avoid having to specify each
+ individual modified key.
+ Steve Wall has a patch (2002 Mar 12) for adding function keys up to 37,
+ with modifiers.
+ 8 Include a connection to an external program through a pipe? See
+ patches from Felbinger for a mathematica interface.
+ Or use emacs server kind of thing?
+ 7 Add an option to set the width of the 'number' column. Eight
+ positions is often more than needed. Or adjust the width to the
+ length of the file?
+ Add patch that adds 'numberlen' option. (James Harvey)
+ Other patch with min and max from Emmanuel Renieris (2002 Jul 24)
+ Other patch without an option by Gilles Roy (2002 Jul 25)
+ 7 Add ":justify" command. Patch from Vit Stradal 2002 Nov 25.
+ - findmatch() should be adjusted for Lisp. See remark at
+ get_lisp_indent(). Esp. \( and \) should be skipped. (Dorai Sitaram,
+ incomplete patch Mar 18)
+ 8 Sorting of filenames for completion is wrong on systems that ignore
+ case of filenames. Add 'ignorefncase' option. When set, case in
+ filenames is ignored for sorting them. Patch by Mike Williams:
+ ~/vim/patches/ignorefncase. Also change what matches? Or use another
+ option name.
+- Change ga_room into ga_maxlen, so that it doesn't need to be
+ incremented/decremented each time.
- new DATA TYPES: lists, dictionaries and function references.
+ Check old patch from Robert Webb for array support.
Add type checking? See ~/vim/ideas.txt.
- Add SPELLCHECKER, with easy to add support for many languages.
+ 8 Add spell checking. Use "ispell -a" somehow.
+ ~/vim/patches/wm_vim-5_4d.zip can be used as an example (includes
+ ispell inside Vim). Gautam Iyer has an example with "aspell".
+ "engspchk" from Charles Campbell is a good way. Support for
+ approximate-regexps will help (agrep http://www.tgries.de/agrep/).
- REFACTORING: The main() function is very long. Move parts to separate
functions, especially loops. Ideas from Walter Briscoe (2003 Apr 3, 2004
Feb 9).
+- Improve the interface between the generic GUI code and the system-specific
+ code. Generic code handles text window with scrollbars, system-specific
+ code menu, toolbar, etc.
- Store messages to allow SCROLLING BACK for all commands. And other "less"
like commands.
- "INTELLISENSE". First cleanup the Insert-mode completion.
@@ -81,6 +300,7 @@
- STICKY CURSOR: Add a way of scrolling that leaves the cursor where it is.
Especially when using the scrollbar. Typing a cursor-movement command
scrolls back to where the cursor is.
+8 Support four composing characters, needed for Hebrew. (Ron Aaron)
Vi incompatibility:
@@ -135,9 +355,6 @@
(Sayre).
7 Add flag in 'cpoptions' that makes operator (yank, filter) not move the
cursor, at least when cancelled. (default Vi compatible).
-7 Make "5dd" on last-but-one-line not delete anything (Vi compatible).
- Add flag in 'cpoptions' for this. When not present, "2dd" in the last
- line should delete the last line. Patch from greenx 2002 Apr 11.
7 This Vi-trick doesn't work: "Q" to go to Ex mode, then "g/pattern/visual".
In Vi you can edit in visual mode, and when doing "Q" you jump to the next
match. Nvi can do it too.
@@ -210,8 +427,6 @@
Put focus event in input buffer and let generic Vim code handle it?
8 When activating the Vim window with mouse click, don't move cursor to
mouse position. Catch WM_MOUSEACTIVATE. (Luevelsmeyer)
-9 The print dialog uses a font which doesn't display multi-byte messages.
- Include patch from Vipin Aravind? Update from Yasuhiro Matsumoto.
8 Win32: When mouse is hidden and in the toolbar, moving it won't make it
appear. (Sami Salonen)
8 Windows NT: writing to aux.* makes Vim hang. (Acevedo)
@@ -311,10 +526,6 @@
Motif GUI:
8 Popup menu ordering is wrong.
-8 Accelerators don't work in a dialog. Include patch from Martin Dalecki
- (Jan 3, tested by David Harrison). Should work with Alt-o then.
-7 Use accelerators for the Motif file selection dialog. Patch from Martin
- Dalecki 2002 Jan 11.
7 Use XmStringCreateLocalized() instead of XmStringCreateSimple()?
David Harrison says it's OK (it exists in Motif 1.2).
8 The texts in the find/replace dialog don't use the right font.
@@ -344,7 +555,6 @@
doesn't work.
8 Menu priority for sub-menus for: Amiga, BeOS.
8 Add menu separators for Amiga, RISCOS.
-8 Add a few more command names. Patch from Jiri Brezina (28 feb 2002).
8 Add way to specify the file filter for the browse dialog. At least for
browse().
8 Add dialog for search/replace to other GUIs? Tk has something for this,
@@ -491,7 +701,6 @@
a Netware network drive. Use same function as for Win32 GUI?
8 In os_win32.h, HAVE_STRICMP and HAVE_STRNICMP are defined only if __GNUC__
is not defined. Shouldn't that be the other way around?
-8 ":winpos" doesn't work. Patch from Vipin Aravind.
7 Use SetConsoleCP() and SetConsoleOutputCP() to implement 'termencoding'?
Avoids that input and output work differently. Need to be restored when
exiting.
@@ -516,12 +725,6 @@
8 Inputting Unicode characters does not work in the terminal. They appear
to arrive as upper and lower bytes. (David Brown, 2004 April 17)
8 Typing Unicode characters doesn't work at all in the GUI.
-8 Patch to add 'transparency' option. Disadvantage: it's slow. (Eckehard
- Berns, 2004 May 9) http://ecki.to/vim-icns/TransBack.diff
-8 Patches from "Rain Dog" Cucka:
- - guifont selector (2002 Dec 15)
- - scrollbar (2002 Dec 8)
- - Quartz fonts (2002 Dec 8)
9 Problems in Carbon version for OS X: (Benji Fisher)
- keyboard shortcuts in the menus get lost.
8 The Vim/About menu doesn't work.
@@ -563,8 +766,6 @@
when compiled with Python (threading).
7 The messages for "vim --help" and "vim --version" don't use
'termencoding'.
-7 ATTENTION dialog choices are more logical when "Delete it' appears before
- "Quit". Patch by Robert Webb, 2004 May 3.
8 When 'scrollbind' is set, a window won't scroll horizontally if the cursor
line is too short. Add a word in 'scrollopt' to allow moving the cursor
to longer line that is visible. A similar thing is done for the GUI when
@@ -651,8 +852,6 @@
9 The "Error detected while processing modelines" message should have an
error number.
7 The message in bt_dontwrite_msg() could be clearer.
-8 Unix: When libcall() fails there is no clear error message. Johannes
- Zellner has a patch for this.
8 The script ID that is stored with an option and displayed with ":verbose
set" isn't reset when the option is set internally. For example when
'foldlevel' is set from 'foldlevelstart'.
@@ -678,13 +877,10 @@
8 When using CTRL-D after ":help", restrict the number of matches to a
thousand, otherwise using CTRL-D without an argument takes too long.
8 ":hardcopy":
- - Patch to append CTRL-D to PostScript output (Mike Williams, 2004 Jun 11)
- Using the cterm_color[] table is wrong when t_colors is > 16.
- Need to handle unprintable characters.
- Win32: On a B&W printer syntax highlighting isn't visible. Perform
dithering to make grey text?
- - support printing multi-byte characters. Patch from Motonobu Ichimura.
- New (better) patch from Mike Williams (2004 Jan 20)
- Add a flag in 'printoptions' to add an empty page to make the total
number even. "addempty"? (Mike Williams)
- Should interpreted CTRL-L as a page break.
@@ -817,7 +1013,6 @@
it. (Lohner) Try out with "vt100" entry, cm replaced with cX.
7 When an include file starts with "../", the check for already visiting
this file doesn't work. Need to simplify the file name.
-8 On Sinix SYS_NMLN isn't defined. Include patch from Cristiano De Michele.
7 The names and comments for the arguments of do_browse() are confusing.
"dflt" isn't the default file name when "initdir" is not NULL and
"initdir" is the default path to be used.
@@ -927,7 +1122,6 @@
Documentation:
8 Extend usr_27.txt a bit. (Adam Seyfarth)
-9 Merge in ideas from ~/vim/patches/tutor.txt (Gabriel Zachmann)
7 Add a section on debugging scripts in the user manual.
9 Make the Reference Manual more precise. For each command mention:
- change to cursor position and curswant
@@ -989,9 +1183,6 @@
disabling it. Be careful that tear-offs don't disappear (keep one empty
item?).
Alternative: use BufEnter and BufLeave autocommands.
-8 Add file locking. Lock a file when starting to edit it with flock() or
- fcntl(). This patch has advisory file locking while reading/writing the
- file: ~/vim/patches/kahn_file_locking .
8 make a vimtutor script for Amiga and other systems.
7 Add the arguments for configure to the ":version" output?
@@ -1065,14 +1256,10 @@
so that the user can fix the problem.
8 Add configure option to be able to disable using the iconv library. (Udo
Schweigert)
-8 Add patch from Muraoka Taro (Mar 16) to support input method on Mac?
9 'aleph' should be set to 1488 for Unicode. (Zvi Har'El)
8 Should add test for using various commands with multi-byte characters.
-- Include flipcase patch: ~/vim/patches/wall.flipcase2 ? Make it work for
- multi-byte characters.
8 'infercase' doesn't work with multi-byte characters.
8 toupper() function doesn't handle byte count changes.
-8 Support four composing characters, needed for Hebrew. (Ron Aaron)
8 "ga" should show all composing characters, also if there are more than 2.
7 When searching, should order of composing characters be ignored?
8 Should implement 'delcombine' for command line editing.
@@ -1122,7 +1309,6 @@
- Win32: when 'printfont' is empty use 'guifont'.
- Unix: Use some dialog box to do the obvious settings (paper size, printer
name, portrait/landscape, etc).
-- Win32: add options to print dialog. Patch from Vipin Aravind.
- PostScript: only works for 7-bit ASCII and EBCDIC. Should support
different 'encoding' values somehow.
- Allow specifying the paper size, instead of using a standard size. Same
@@ -1133,10 +1319,6 @@
Syntax highlighting:
-- Patch to add highlighting for whitespace. (Tom Schumm, 2003 Jul 5)
- use the patch that keeps using HLF_8 if HLF_WS has not
- been given values.
- Add section in help files for these highlight groups?
8 Make ":syn off" use 'runtimepath' instead of $VIMRUNTIME. (Gary Johnson)
Should do the same for ":syn on" and ":syn manual".
8 Support "containedin" argument for ":syn include", so that the defined
@@ -1184,8 +1366,6 @@
re-insert the [] if possible.
8 Make it possible to use color of text for Visual highlight group (like for
the Cursor).
-8 "fg" and "bg" don't work in an xterm. Get default colors from xterm with
- an ESC sequence. Ideas in: ~/vim/patches/vikas.xtermcolors .
8 Make it possible to only highlight a sub-expression of a match. Like
using "\1" in a ":s" command.
8 Support for deleting syntax items:
@@ -1204,8 +1384,6 @@
character. For Visual mode. (xterm-selection already does this).
8 Highlight non-printable characters with "SpecialChar", linked to
"Special". Display them with the digraph characters, if possible.
-7 Add "DefaultFG" and "DefaultBG" for the colors of the menu. (Martin
- Dalecki has a patch for Motif)
8 Highlight the clipboard-selection with a highlight group.
8 Be able to reset highlighting to its original (default) values.
7 Be able to write current highlighting to a file as commands, similar to
@@ -1236,11 +1414,6 @@
7 CTRL-] checks the highlight group for finding out what the tag is.
7 Add an explanation how a list of words can be used to highlight misspelled
words.
-8 Add spell checking. Use "ispell -a" somehow.
- ~/vim/patches/wm_vim-5_4d.zip can be used as an example (includes ispell
- inside Vim). Gautam Iyer has an example with "aspell". "engspchk" from
- Charles Campbell is a good way. Support for approximate-regexps will help
- (agrep http://www.tgries.de/agrep/).
7 Command line completion for ":find" should search in 'path'.
8 Add more command line completion for :syntax.
8 Add more command line completion for :highlight.
@@ -1267,9 +1440,6 @@
- Make it possible to add "contains" items for all items in a group. Useful
when extending an already existing syntax file.
- Add line-continuation pattern for non-syncing items too?
-- Add possibility to highlight specific columns (for Fortran). Or put a
- line in between columns (e.g. for 'textwidth').
- Patch to add 'hlcolumn' from Vit Stradal, 2004 May 20.
- Add possibility to highlight the whole line, including the right margin
(for comment blocks).
- Add 'hlmatch' option: List of flags:
@@ -1303,11 +1473,6 @@
8 Allow range for ":exec". Pass it on to the executed command. (Webb)
8 exists("&&option") tests if 'option' is actually implemented. Useful for
'shellslash', for example.
-7 Be able to call a function while passing on a variable number of
- arguments:
- :function Foo(abc, ...)
- : call Bar(a:abc, a:*)
- Charles Campbell has a patch for this
8 Have a look at VSEL. Would it be useful to include? (Bigham)
8 Add ":fungroup" command, to group function definitions together. When
encountered, all functions in the group are removed. Suggest using an
@@ -1329,26 +1494,10 @@
file belongs to a sourced script?
7 Add "n" flag to search() function, just like searchpair(). (Alexey
Marinichev)
-8 Add ":n" to fnamemodify(): normalize path, remove "../" when possible.
- Aric Blumer has a patch for this.
7 Add argument to winwidth() to subtract the space taken by 'foldcolumn',
signs and/or 'number'.
8 Add functions:
- multibyteidx(string, idx) Byte index in multi-byte character.
- Patch by Ilya Sher, 2004 Feb 25
- menuprop({name}, {idx}, {what})
- Get menu property of menu {name} item {idx}.
- menuprop("", 1, "name") returns "File".
- menuprop("File", 1, "n") returns "nmenu
- File.Open..." argument.
- Patch by Ilya Sher, 2004 Apr 22
- mapname({idx}, mode) return the name of the idx'th mapping.
- Patch by Ilya Sher, 2004 Mar 4.
- match({pat}, {string} [,start] [,count]) get index of count'th match
- Patch by Ilya Sher, 2004 Mar 31
sprintf(format, arg, ..) How to prevent a crash???
- mousex() mousey() get position of mouse pointer (patch by Ross
- Presser)
attributes() return file protection flags "drwxrwxrwx"
mkdir(dir) Create directory
copy(from, to) Copy a file
@@ -1360,48 +1509,15 @@
Visual block mode.
tagtype(tag) get type of tag (also checks if it exists)
getacp() Win32: get codepage (Glenn Maynard)
- tr(expr, from, to) translate chars (Patch from Ron Aaron, Apr 8
- 2004)
- find() find file in 'path' (patch from Johannes
- Zellner 2001 Dec 20)
- realname() Get user name (first, last, full)
- user_fullname() patch by Nikolai Weibull, Nov
- 3 2002)
- getfperm() file permissions, in form "rwxrwxrwx"
- (patch from Nikolai Weibull 2003 Jan 13)
- getftype() "file", "dir", "link", "other"?
- (patch from Nikolai Weibull 2003 Jan 13)
- setbufline() set line in any buffer (patch from Yegappan
- Lakshmanan, 2003 Jan 21)
getbufline() get line from any buffer
deletebufline() delete line in any buffer
appendbufline() append line in any buffer
- winnr("$") Get number of windows. (patch from Nikolai
- Weibull 2003 Jan 13) (another patch from
- Yegappan Lakshmanan, 2003 Aug 31)
- search() Add optional offset argument.
- Add 'n' flag. (patch from Nikolai Weibull
- 2003 Jan 13)
sort() Sort a newline-separated string. Also:
":sort".
libcall() Allow more than one argument.
libcallext() Like libcall(), but using a callback function
to allow the library to execute a command or
evaluate an expression.
- confirm() add "flags" argument, with 'v' for vertical
- layout and 'c' for console dialog. (Haegg)
- Flemming Madsen has a patch for the 'c' flag
- (2003 May 13)
- system({cmd}, {expr}) Filter {expr} through the shell command
- {cmd} and return the result.
- (Patch from Yegappan Lakshmanan)
- raisewin() raise gvim window (see HierAssist patch for
- Tcl implementation ~/vim/HierAssist/ )
- gettext() Translate a message. (Patch from Yasuhiro
- Matsumoto) How to get the messages into the
- .po files?
- strrep() Repeat a string (patch from Christophe Poucet,
- 2003 Sep 12, also contains XX)
char2hex() convert char string to hex string. XX
hex2char() convert hex string to char string. XX
7 Make bufname("'0") return the buffer name from mark '0. How to get the
@@ -1440,12 +1556,6 @@
7 Automatically load a function from a file when it is called. Need an
option for the search path. (Sekera)
7 Persistent variables: "p:var"; stored in viminfo file and sessions files.
-7 Include support for arrays? Patch from Robert Webb.
- This is restricted to fixed-size arrays indexed by number. Better: Use
- associative arrays: a[5] = 3, a["some"] = 'x'. Implement by translating
- into ordinary variables: a[5] is "-a-5", a["some"] is "a-some", a[5][6] is
- "a-5-6". But how to do array assignment and concatenation?
- Alternative: use dictionaries, like Python.
Robustness:
@@ -1617,7 +1727,6 @@
an event handler where ":normal" can't be used. Also useful when
'lazyredraw' is set in a mapping.
7 Make 'list' and 'linebreak' work together.
-7 Add "nbsp" in 'listchars'? Patch from David Blanchet, 2003 Jul 28.
Scrolling:
@@ -1655,8 +1764,6 @@
Perl interface:
8 Rename typemap file to something else?
-7 Add patch from Benoit Cerrina to integrate Vim and Perl functions better.
- Now also works for Ruby (2001 Nov 10)
7 Make buffers accessed as Perl arrays. (Clark)
7 Make it possible to compile with non-ANSI C?
6 Tcl/Tk has the "load" command: load a shared library (.so or .dll).
@@ -1710,8 +1817,6 @@
7 Better support for jumping to where a function or variable is used. Use
the id-utils, with a connection to "gid" (Emacs can do it too). Add
":idselect", which uses an "ID" database (made by "mkid") like "tselect".
-7 Add 'taglistfiles' option, show file name and type when listing matching
- tags name with CTRL-D completion. Patch from Yegappan Lakshmanan.
Security:
@@ -1758,8 +1863,6 @@
GUI:
-8 Add GTK 2.3 file dialog support. Patch by Grahame Bowland, 2004 Mar 15,
- but it doesn't use "initdir" or "dflt".
8 Make inputdialog() work for Photon, Amiga, RiscOS.
- <C--> cannot be mapped. Should be possible to recognize this as a
normal "-" with the Ctrl modifier.
@@ -1781,8 +1884,6 @@
explicit. There are too many #ifdefs in gui.c.
If possible, separate the Vim code completely from the GUI code, to allow
running them in separate processes.
-8 Support a background bitmap. Useful for marking a column. Patch from
- Heather Downs (GTK) and Vince Negri (Win32).
7 X11: Support cursorColor resource and "-cr" argument.
8 X11 (and others): CTRL-; is not different from ';'. Set the modifier mask
to include CTRL for keys where CTRL produces the same ASCII code.
@@ -1793,8 +1894,6 @@
8 Selecting font names in X11 is difficult, make a script or something to
select one. Martin Dalecki has a font selector for Motif, but it needs a
bit more work.
-7 Motif: use the menu font consistently. Patch from Martin Dalecki 2002 Jan
- 11.
8 Visual highlighting should keep the same font (bold, italic, etc.).
8 Add flag to 'guioptions' to not put anything in the clipboard at all?
8 Should support a way to use keys that we don't recognize yet. Add a
@@ -1838,7 +1937,6 @@
button selected, <Esc> should close the dialog.
- Motif steals <F10> from us, to pop up menus with the keyboard. How do we
get it back if we want it?
-- Motif: add 3D shading for the menu entries? Patch from Martin Dalecki.
- Paste in Insert mode should not do autowrap etc. Or maybe this should be
changeable with an option?
- Put a nice picture in the icon (but how do we do that?).
@@ -1898,13 +1996,6 @@
8 When editing "tt.gz", which is in DOS format, 'fileformat' stays at
"unix", thus writing the file changes it. Somehow detect that the read
command used dos fileformat. Same for 'fileencoding'.
-8 Add buffer-local autocommands? Reduces overhead for autocommands that
- trigger often (inserting a character, switching mode).
- :au Event <buffer> do-something
- E.g.:
- :au BufEnter <buffer> menu enable ...
- :au BufLeave <buffer> menu disable ...
- Patch from Yakov Lerner, including test (2004 Jan 7).
- Add events to autocommands:
Error - When an error happens
NormalEnter - Entering Normal mode
@@ -1937,8 +2028,6 @@
that marks can be updated. HierAssist has patch to add
BufChangePre, BufChangePost and RevertBuf. (Shah)
WinResized - When a window has been resized
- VimResized - When the Vim window has been resized (SIGWINCH)
- patch from Yakov Lerner, 2003 July 24.
- Add autocommand to be executed every so many seconds? For writing the
file now and then ('autosave').
*'autosave'* *'as'* *'noautosave'* *'noas'*
@@ -1961,8 +2050,6 @@
8 Add option to set different behavior for Insert mode completion:
- ignore/match case
- different characters than 'iskeyword'
-8 Add expression-expansion, so that the user can define his own kind of
- completion. Patch from Taro Muraoka, 2003 Aug 26.
8 Add a command to undo the completion, go back to the original text.
8 Use the class information in the tags file to do context-sensitive
completion. After "foo." complete all member functions/variables of
@@ -2045,7 +2132,6 @@
file name, so it can be edited. Also with modifiers, such as "%:h".
8 When completing command names, either sort them on the long name, or list
them with the optional part inside [].
-7 Completion of network shares, patch by Yasuhiro Matsumoto.
7 Completion of ":map x ": fill in the current mapping, so that it can be
edited. (Sven Guckes)
7 Add completion for when entering an expression after CTRL-R= and "=.
@@ -2083,10 +2169,6 @@
Insert mode:
-9 When 'autoindent' is set, hitting <CR> twice, while there is text after
- the cursor, doesn't delete the autoindent in the resulting blank line.
- (Rich Wales) This is Vi compatible, but it looks like a bug. Rich has a
- suggestion for a patch to fix this.
8 When using CTRL-O in Insert mode, then executing an insert command
"a" or "i", should we return to Insert mode after <Esc>? (Eggink)
Perhaps it can be allowed a single time, to be able to do
@@ -2094,10 +2176,6 @@
":map <F2> 5aabc<Esc>" works only once from Insert mode.
7 Use CTRL-G <count> to repeat what follows. Useful for inserting a
character multiple times or repeating CTRL-Y.
-7 Make ":startinsert" command work directly for functions and scripts?
- Also make it possible to append (it's difficult at end of line).
- And add ":startreplace" (patch by Charles Campbell, 2004 Jan 9,
- http://www.erols.com/astronaut/vim/index.html#Patch)
7 Use 'matchpairs' for 'showmatch': When inserting a character check if it
appears in the rhs of 'matchpairs'.
- In Insert mode (and command line editing?): Allow undo of the last typed
@@ -2261,8 +2339,6 @@
deletes the current and previous sentence. (Jens Paulus)
7 Add "g{" and "g}" to move to the first/last character of a paragraph
(instead of the line just before/after a paragraph as with "{" and "}").
-8 Add "a'" and 'a"': a single or double quoted string. (Tim Chase)
- Patch from Taro Muraoka (2003 Dec 16).
6 Ignore comment leaders for objects. Make "das" work in reply-email.
5 Make it possible to use syntax group matches as a text object. For
example, define a "ccItem" group, then do "da<ccItem>" to delete one.
@@ -2308,7 +2384,7 @@
7 CTRL-V :s should substitute only in the block, not to whole lines. (David
Young is working on this)
7 Filtering a block should only apply to the block, not to the whole lines.
- When the number of lines is increased, add lines. When decreased, padd with
+ When the number of lines is increased, add lines. When decreased, pad with
spaces or delete? Use ":`<,`>" on the command line.
8 After filtering the Visual area, make "gv" select the filtered text?
Currently "gv" only selects a single line, not useful.
@@ -2323,9 +2399,6 @@
the right column, and then use up/down movements to select the line,
without changing the column.
6 ":left" and ":right" should work in Visual block mode.
-7 For Visual mode: Command to do a search for the string in the marked area.
- Only when fewer than two lines. Use "g/" and "gb". Patch from Yegappan
- Lakshmanan.
7 CTRL-I and CTRL-O should work in Visual mode, but only jump to marks in the
current buffer.
7 CTRL-A and CTRL-X should increase/decrease all numbers in the Visual area.
@@ -2460,8 +2533,6 @@
search(). (Brett)
7 Add pattern item to use properties of Unicode characters. In Perl it's
"\p{L}" for a letter. See Regular Expression Pocket Reference.
-7 When 'rightleft' is set, the search pattern should be displayed right to
- left as well? See patch of Dec 26. (Nadim Shaikli)
8 Would it be possible to allow ":23,45/pat/flags" to search for "pat" in
lines 23 to 45? Or does this conflict with Ex range syntax?
8 Allow identical pairs in 'matchpairs'. Restrict the search to the current
@@ -2590,8 +2661,6 @@
Buffer list:
-8 Add patch from Charles Campbell to have ":0file!" remove the name of the
- current buffer. (2003 June 17)
7 Command to execute a command in another buffer: ":inbuf {bufname} {cmd}".
Also for other windows: ":inwin {winnr} {cmd}". How to make sure that
this works properly for all commands, and still be able to return to the
@@ -2769,9 +2838,6 @@
to jump to the mark (in current window or new window). Start it with
":browse marks"?
6 Add a menu that lists the Marks like ":marks". (Amerige)
-8 Make it possible to delete marks. Charles Campbell has a patch that does
- this with the markclear() function (2004 Jan 9). And the ":delmark"
- command (2004 Feb 9)
7 For ":jumps", ":tags" and ":marks", for not loaded buffers, remember the
text at the mark. Highlight the column with the mark.
7 Highlight each mark in some way (With "Mark" highlight group).
@@ -2855,7 +2921,6 @@
Mouse support:
-7 Win32: Add patch for 5-button mouse. (Michael Geddes 2001 Nov 26)
8 Add 'o' flag to 'mouse'?
7 Be able to set a 'mouseshape' for the popup menu.
8 Add 'mouse' flag, which sets a behavior like Visual mode, but automatic
@@ -2872,9 +2937,6 @@
Crypt and security:
8 Also crypt the swapfile, each block separately. Change mf_write() and
mf_read(). How to get b_p_key to these functions?
-7 Support a stronger encryption. Jason Holt implemented AES (May 6 2003).
-8 Lock all used memory so that it doesn't get swapped to disk (uncrypted).
- Patch by Jason Holt, 2003 May 23.
Argument list:
@@ -2904,7 +2966,7 @@
to position of previous deleted (to swap foo and bar in " + foo")
8 Should be able to yank and delete into the "/ register.
How to take care of the flags (offset, magic)?
-7 Add ! register, for shell commands. (patch from Grenie)
+
Debug mode:
7 Add something to enable debugging when a remote message is received.
@@ -2919,8 +2981,6 @@
Various improvements:
8 Add ":rename" command: rename the file of the current buffer and rename
the buffer. Buffer may be modified.
-7 Add the MzScheme interface. Patch on http://iamphet.nm.ru/scheme/
- (Sergey Khorev)
6 In the quickfix window statusline add the command used to get the list of
errors, e.g. ":make foo", ":grep something *.c".
6 Python interface: add vim.message() function. (Michal Vitecek, 2002 Nov 5)
@@ -2933,13 +2993,8 @@
to manipulate text without changing the window layout.
8 Add a command to revert to the saved version of file; undo or redo until
all changes are gone.
-8 Make 'statusline' local, so that each window can have a different value.
- But should it also be local to a buffer? (Yegappan Lakshmanan has a patch,
- 2002 feb 15)
7 Add a ":cpfile", go in the other direction as ":cnfile".
6 "vim -q -" should read the list of errors from stdin. (Gautam Mudunuri)
-8 In the gzip plugin, also recognize *.gz.orig, *.gz.bak, etc. Like it's
- done for filetype detection. Patch from Walter Briscoe, 2003 Jul 1.
8 Add "--remote-fail": When contacting the server fails, exit Vim.
Add "--remote-self": When contacting the server fails, do it in this Vim.
Overrules the default of "--remote-send" to fail and "--remote" to do it
@@ -2953,16 +3008,8 @@
CR characters. For example, for "dos" files remove CR characters at the
end of the line, so that a file with mixed line endings is cleaned up.
To just not display the CR characters: Add a flag to 'display'?
-7 Add a "-@ filelist" argument: read file names from a file. (David Kotchan
- has a patch for it)
7 Some compilers give error messages in which the file name does not have a
path. Be able to specify that 'path' is used for these files.
-8 Add term entries for function keys on xterm with alt and ctrl (new in pl
- 94). E.g., Control adds ";5" in "<Esc>[20;5~". Find a generic way to
- prepend a modifier in console mode, to avoid having to specify each
- individual modified key.
- Steve Wall has a patch (2002 Mar 12) for adding function keys up to 37,
- with modifiers.
7 Xterm sends <Esc>O3F for <M-End>. Similarly for other <M-Home>, <M-Left>,
etc. Combinations of Alt, Ctrl and Shift are also possible. Recognize
these to avoid inserting the raw byte sequence, handle like the key
@@ -2984,26 +3031,13 @@
8 Support printing on Unix. Can use "lpansi.c" as an example. (Bookout)
8 Add put command that replaces the text under it. Esp. for blockwise
Visual mode.
-7 Enhance termreponse stuff: Add t_CV(?): pattern of term response, use
+7 Enhance termresponse stuff: Add t_CV(?): pattern of term response, use
regexp: "\e\[[>?][0-9;]*c", but only check just after sending t_RV.
7 Add "g|" command: move to N'th column from the left margin (after wrapping
and applying 'leftcol'). Works as "|" like what "g0" is to "0".
-7 Add patch from Wall for this one ( ~/Mail/oldmail/wall/in.00019 ):
- 'flipcase' variable: upper/lowercase pairs.
- Insert comma's between pairs and allow a range, make it look like
- 'isfname'. E.g. ":set flipcase=a-zA-Z,xX,23-33:143-153". The colon to
- separate the from and to part is optional.
7 Support setting 'equalprg' to a user function name.
-9 Add cursor-column highlighting. Enable it with 'cursorcolumn' option, set
- highlighting with "CursorColumn" group. Useful for aligning text.
- Also cursor-row highlighting.
- Patch from Yasuhiro Matsumoto for underlining the cursor line, 2004 Mar 24.
- Alternatie: when 'number' is set highlight the number of the current line.
7 Highlight the characters after the end-of-line differently.
7 When 'whichwrap' contains "l", "$dl" should join lines?
-8 Include a connection to an external program through a pipe? See patches
- from Felbinger for a mathematica interface.
- Or use emacs server kind of thing?
8 Add an argument to configure to use $CFLAGS and not modify it? (Mooney)
8 Enabling features is a mix of configure arguments and defines in
feature.h. How to make this consistent? Feature.h is required for
@@ -3043,11 +3077,6 @@
7 Add a history of recently accessed buffer. Maybe make "2 CTRL-^" jump to
the 2nd previously visited buffer, "3 CTRL-^" to the third, etc. Or use
"3 g CTRL-^" for this?
-7 Add an option to set the width of the 'number' column. Eight positions is
- often more than needed. Or adjust the width to the length of the file?
- Add patch that adds 'numberlen' option. (James Harvey)
- Other patch with min and max from Emmanuel Renieris (2002 Jul 24)
- Other patch without an option by Gilles Roy (2002 Jul 25)
- Add code to disable the CAPS key when going from Insert to Normal mode.
- Set date/protection/etc. of the patchfile the same as the original file.
- Use growarray for termcodes[] in term.c
@@ -3075,7 +3104,6 @@
9 When using ":w <fname>" it's possible that this file is loaded in another
buffer. Give a warning right away, don't wait for a shell command.
- Make 'smartcase' work even though 'ic' isn't set (Webb).
-7 Add ":justify" command. Patch from Vit Stradal 2002 Nov 25.
7 When formatting text, allow to break the line at a number of characters.
Use an option for this: 'breakchars'? Useful for formatting Fortran code.
- Add flag to 'formatoptions' to be able to format book-style paragraphs
@@ -3101,8 +3129,6 @@
- Make "gq<CR>" work on the last line in the file. Maybe for every operator?
8 findmatchlimit() should be able to skip comments. Solves problem of
matching the '{' in /* if (foo) { */ (Fiveash)
-- findmatch() should be adjusted for Lisp. See remark at get_lisp_indent().
- Esp. \( and \) should be skipped. (Dorai Sitaram, incomplete patch Mar 18)
- Add more redirecting of Ex commands:
:redir @> register (append)
:redir # bufname
@@ -3335,11 +3361,6 @@
- Support mapping for replace mode and "r" command (Vi doesn't do this)?
5 Add 'ignorefilecase' option: Ignore case when expanding file names.
":e ma<Tab>" would also find "Makefile" on Unix.
-8 Sorting of filenames for completion is wrong on systems that ignore case
- of filenames. Add 'ignorefncase' option. When set, case in filenames is
- ignored for sorting them. Patch by Mike Williams:
- ~/vim/patches/ignorefncase. Also change what matches? Or use another
- option name.
8 Should be able to compile Vim in another directory, with $(srcdir) set to
where the sources are. Add $(srcdir) in the Makefile in a lot of places.
(Netherton)
diff --git a/runtime/doc/various.txt b/runtime/doc/various.txt
index 252572d..8753bfa 100644
--- a/runtime/doc/various.txt
+++ b/runtime/doc/various.txt
@@ -1,4 +1,4 @@
-*various.txt* For Vim version 7.0aa. Last change: 2004 May 01
+*various.txt* For Vim version 7.0aa. Last change: 2004 Jun 14
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -431,7 +431,8 @@
*:verb* *:verbose*
:[count]verb[ose] {command}
Execute {command} with 'verbose' set to [count]. If
- [count] is omitted one is used.
+ [count] is omitted one is used. ":0verbose" can be
+ used to set 'verbose' to zero.
The additional use of ":silent" makes messages
generated but not displayed.
The combination of ":silent" and ":verbose" can be
diff --git a/runtime/indent/python.vim b/runtime/indent/python.vim
index 3dbbe10..3c030f8 100644
--- a/runtime/indent/python.vim
+++ b/runtime/indent/python.vim
@@ -2,7 +2,7 @@
" Language: Python
" Maintainer: Bram Moolenaar <Bram@vim.org>
" Original Author: David Bustos <bustos@caltech.edu>
-" Last Change: 2003 Sep 08
+" Last Change: 2004 Jun 15
" Only load this indent file when no other was loaded.
if exists("b:did_indent")
@@ -36,7 +36,7 @@
" If the start of the line is in a string don't change the indent.
if has('syntax_items')
- \ && synIDattr(synID(a:lnum, 1, 1), "name") == "pythonString"
+ \ && synIDattr(synID(a:lnum, 1, 1), "name") =~ "String$"
return -1
endif
@@ -56,7 +56,7 @@
let parlnum = searchpair('(', '', ')', 'nbW',
\ "line('.') < " . (plnum - s:maxoff) . " ? dummy :"
\ . " synIDattr(synID(line('.'), col('.'), 1), 'name')"
- \ . " =~ 'python\\(Comment\\|String\\)'")
+ \ . " =~ '\\(Comment\\|String\\)$'")
if parlnum > 0
let plindent = indent(parlnum)
let plnumstart = parlnum
@@ -75,14 +75,14 @@
let p = searchpair('(', '', ')', 'bW',
\ "line('.') < " . (a:lnum - s:maxoff) . " ? dummy :"
\ . " synIDattr(synID(line('.'), col('.'), 1), 'name')"
- \ . " =~ 'python\\(Comment\\|String\\)'")
+ \ . " =~ '\\(Comment\\|String\\)$'")
if p > 0
if p == plnum
" When the start is inside parenthesis, only indent one 'shiftwidth'.
let pp = searchpair('(', '', ')', 'bW',
\ "line('.') < " . (a:lnum - s:maxoff) . " ? dummy :"
\ . " synIDattr(synID(line('.'), col('.'), 1), 'name')"
- \ . " =~ 'python\\(Comment\\|String\\)'")
+ \ . " =~ '\\(Comment\\|String\\)$'")
if pp > 0
return indent(plnum) + &sw
endif
@@ -102,7 +102,7 @@
let col = 0
while col < pline_len
if pline[col] == '#' && (!has('syntax_items')
- \ || synIDattr(synID(plnum, col + 1, 1), "name") == "pythonComment")
+ \ || synIDattr(synID(plnum, col + 1, 1), "name") =~ "Comment$")
let pline = strpart(pline, 0, col)
break
endif
diff --git a/runtime/lang/menu_ru_ru.koi8-r.vim b/runtime/lang/menu_ru_ru.koi8-r.vim
index 94d78a7..295b016 100644
--- a/runtime/lang/menu_ru_ru.koi8-r.vim
+++ b/runtime/lang/menu_ru_ru.koi8-r.vim
@@ -155,11 +155,12 @@
menutrans Create\ &Fold<Tab>zf óÏ&ÚÄÁÔØ\ ÓËÌÁÄËÕ<Tab>zf
menutrans &Delete\ Fold<Tab>zd õ&ÄÁÌÉÔØ\ ÓËÌÁÄËÕ<Tab>zd
menutrans Delete\ &All\ Folds<Tab>zD õÄÁÌÉÔØ\ ×Ó&Å\ ÓËÌÁÄËÉ<Tab>zD
-menutrans Fold\ column\ &width &ûÉÒÉÎÁ\ ËÏÌÏÎËÉ\ ÓËÌÁÄÏË
+menutrans Fold\ col&umn\ width &ûÉÒÉÎÁ\ ËÏÌÏÎËÉ\ ÓËÌÁÄÏË
">>>->>>----------- Tools/Folds/Fold Method
menutrans M&anual ÷ÒÕ&ÞÎÕÀ
menutrans I&ndent ï&ÔÓÔÕÐ
menutrans E&xpression &÷ÙÒÁÖÅÎÉÅ
+menutrans S&yntax &óÉÎÔÁËÓÉÓ
menutrans Ma&rker &íÁÒËÅÒÙ
">>>--------------- Tools/Diff
menutrans &Update ï&ÂÎÏ×ÉÔØ
@@ -177,6 +178,7 @@
menutrans Set\ '&syntax'\ only &éÚÍÅÎÑÔØ\ ÔÏÌØËÏ\ ÚÎÁÞÅÎÉÅ\ 'syntax'
menutrans Set\ '&filetype'\ too éÚÍÅÎÑÔØ\ &ÔÁËÖÅ\ ÚÎÁÞÅÎÉÅ\ 'filetype'
menutrans &Off &ïÔËÌÀÞÉÔØ
+menutrans &Manual ÷ÒÕ&ÞÎÕÀ
menutrans A&utomatic &á×ÔÏÍÁÔÉÞÅÓËÉ
menutrans on/off\ for\ &This\ file ÷ËÌ/×ÙËÌ\ ÄÌÑ\ &ÜÔÏÇÏ\ ÆÁÊÌÁ
menutrans Co&lor\ test ðÒÏ×ÅÒËÁ\ &Ã×ÅÔÏ×