diff --git a/runtime/doc/editing.txt b/runtime/doc/editing.txt
index b29504c..dc22930 100644
--- a/runtime/doc/editing.txt
+++ b/runtime/doc/editing.txt
@@ -334,6 +334,22 @@
 			(For {Visual} see |Visual-mode|.)
 			{not in VI}
 
+							*gF*
+[count]gF		Same as "gf", except if a number follows the file
+			name, then the cursor is positioned on that line in
+			the file. The file name and the number must be
+			separated by a non-filename (see 'isfname') and
+			non-numeric character. White space between the
+			filename, the separator and the number are ignored.
+			Examples: >
+				eval.c:10
+				eval.c @ 20
+				eval.c (30)
+				eval.c 40
+<
+							*v_gF*
+{Visual}[count]gF	Same as "v_gf".
+
 These commands are used to start editing a single file.  This means that the
 file is read into the buffer and the current file name is set.  The file that
 is opened depends on the current directory, see |:cd|.
diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt
index 474f863..adcd6f3 100644
--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -1,4 +1,4 @@
-*eval.txt*      For Vim version 7.0aa.  Last change: 2006 Feb 20
+*eval.txt*      For Vim version 7.0aa.  Last change: 2006 Feb 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -6928,7 +6928,7 @@
 
 							*sandbox-option*
 A few options contain an expression.  When this expression is evaluated it may
-have to be done in the sandbox to avoid trouble.  But the sandbox is
+have to be done in the sandbox to avoid a security risc.  But the sandbox is
 restrictive, thus this only happens when the option was set from an insecure
 location.  Insecure in this context are:
 - sourcing a .vimrc or .exrc in the current directlry
diff --git a/runtime/doc/index.txt b/runtime/doc/index.txt
index b265ee6..fa4eca4 100644
--- a/runtime/doc/index.txt
+++ b/runtime/doc/index.txt
@@ -541,6 +541,9 @@
 				   the cursor
 |CTRL-W_f|	CTRL-W f	   split window and edit file name under the
 				   cursor
+|CTRL-W_F|	CTRL-W F	   split window and edit file name under the
+				   cursor and jump to the line number
+				   following the file name.
 |CTRL-W_g_CTRL-]| CTRL-W g CTRL-]  split window and do |:tjump| to tag under
 				   cursor
 |CTRL-W_g]|	CTRL-W g ]	   split window and do |:tselect| for tag
@@ -719,6 +722,9 @@
 				   word
 |gf|		gf		   start editing the file whose name is under
 				   the cursor
+|gF|		gF		   start editing the file whose name is under
+				   the cursor and jump to the line number
+				   following the filename.
 |gg|		gg		1  cursor to line N, default first line
 |gh|		gh		   start Select mode
 |gi|		gi		2  like "i", but first move to the |'^| mark
diff --git a/runtime/doc/insert.txt b/runtime/doc/insert.txt
index 450f667..5f55131 100644
--- a/runtime/doc/insert.txt
+++ b/runtime/doc/insert.txt
@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 7.0aa.  Last change: 2006 Feb 14
+*insert.txt*    For Vim version 7.0aa.  Last change: 2006 Feb 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -993,10 +993,12 @@
 	menu		extra text for the popup menu
 	info		more information about the item
 	kind		single letter indicating the type of completion
+	icase		when not zero case is to be ignored; when omitted
+			the 'ignorecase' option is used
 
-All of these must be a string.  If an item does not meet these requirements
-then an error message is given and further items in the list are not used.
-You can mix string and Dictionary items in the returned list.
+All of these except 'icase' must be a string.  If an item does not meet these
+requirements then an error message is given and further items in the list are
+not used.  You can mix string and Dictionary items in the returned list.
 
 The "menu" item is used in the popup menu and may be truncated, thus it should
 be relatively short.  The "info" item can be longer, it may be displayed in a
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index 53411ad..b8931ae 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 7.0aa.  Last change: 2006 Feb 21
+*options.txt*	For Vim version 7.0aa.  Last change: 2006 Feb 22
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1629,7 +1629,9 @@
 		    sufficient colors are available.  |ins-completion-menu|
 
 	   longest  Only insert the longest common text of the matches.  Use
-	            CTRL-L to add more characters.
+	            CTRL-L to add more characters.  Whether case is ignored
+		    depends on the kind of completion.  For buffer text the
+		    'ignorecase' option is used.
 
 
 				*'confirm'* *'cf'* *'noconfirm'* *'nocf'*
@@ -2904,7 +2906,7 @@
 	|v:count| the number of lines to be formatted.
 	When this option is empty 'formatprg' is used.
 	Example: >
-		:set formatexp=mylang#Format()
+		:set formatexpr=mylang#Format()
 <	This will invoke the mylang#Format() function in the
 	autoload/mylang.vim file in 'runtimepath'. |autoload|
 
@@ -6073,6 +6075,11 @@
 	( -   Start of item group.  Can be used for setting the width and
 	      alignment of a section.  Must be followed by %) somewhere.
 	) -   End of item group.  No width fields allowed.
+	T N   For 'tabline': start of tab page N label.  Use %T after the last
+	      label.  This information is used for mouse clicks.
+	X N   For 'tabline': start of close tab N label.  Use %X after the
+	      label, e.g.: %3Xclose%X.  Use %999X for a "close current tab"
+	      mark.  This information is used for mouse clicks.
 	< -   Where to truncate line if too long.  Default is at the start.
 	      No width fields allowed.
 	= -   Separation point between left and right aligned items.
@@ -6269,14 +6276,15 @@
 			feature}
 	When nonempty, this option determines the content of the tab pages
 	line at the top of the Vim window.  When empty Vim will use a default
-	tab pages line. |tab-page|
+	tab pages line.  See |setting-tabline| for more info.
 
 	The tab pages line only appears as specified with the 'showtabline'
 	option and only when there is no GUI implementation for tabs.
 
 	The value is evaluated like with 'statusline'.  You can use
 	|tabpagenr()|, |tabpagewinnr()| and |tabpagebuflist()| to figure out
-	the text to be displayed.  See |setting-tabline| for more info.
+	the text to be displayed.  Use "%1T" for the first label, "%2T" for
+	the second one, etc.  Use "%X" items for closing labels.
 
 	Keep in mind that only one of the tab pages is the current one, others
 	are invisible and you can't jump to their windows.
diff --git a/runtime/doc/tabpage.txt b/runtime/doc/tabpage.txt
index e0e8b17..2db521e 100644
--- a/runtime/doc/tabpage.txt
+++ b/runtime/doc/tabpage.txt
@@ -1,4 +1,4 @@
-*tabpage.txt*   For Vim version 7.0aa.  Last change: 2006 Feb 21
+*tabpage.txt*   For Vim version 7.0aa.  Last change: 2006 Feb 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -164,14 +164,28 @@
 	function MyTabLine()
 	  let s = ''
 	  for i in range(tabpagenr('$'))
+	    " select the highlighting
 	    if i + 1 == tabpagenr()
 	      let s .= '%#TabLineSel#'
 	    else
 	      let s .= '%#TabLine#'
 	    endif
+
+	    " set the tab page number (for mouse clicks)
+	    let s .= '%' . (i + 1) . 'T'
+
+	    " the label is made by MyTabLabel()
 	    let s .= ' %{MyTabLabel(' . (i + 1) . ')} '
 	  endfor
-	  let s .= '%#TabLineFill#'
+
+	  " after the last tab fill with TabLineFill and reset tab page nr
+	  let s .= '%#TabLineFill#%T'
+
+	  " right-align the label to close the current tab page
+	  if tabpagenr('$') > 1
+	    let s .= '%=%#TabLine#%999Xclose'
+	  endif
+
 	  return s
 	endfunction
 
@@ -187,7 +201,6 @@
 resembles the default, but without adding a + for a modified buffer or
 trunctating the names.  You will want to reduce the width of labels in a
 clever way when there is not enough room.  Check the 'columns' option for the
-space available, keeping in mind that the "X" at the right will take one more
-position.
+space available.
 
  vim:tw=78:ts=8:ft=help:norl:
diff --git a/runtime/doc/tags b/runtime/doc/tags
index 630e0f8..278e1ba 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -3078,6 +3078,7 @@
 CTRL-W_CTRL-]	windows.txt	/*CTRL-W_CTRL-]*
 CTRL-W_CTRL-^	windows.txt	/*CTRL-W_CTRL-^*
 CTRL-W_CTRL-_	windows.txt	/*CTRL-W_CTRL-_*
+CTRL-W_F	windows.txt	/*CTRL-W_F*
 CTRL-W_H	windows.txt	/*CTRL-W_H*
 CTRL-W_J	windows.txt	/*CTRL-W_J*
 CTRL-W_K	windows.txt	/*CTRL-W_K*
@@ -5285,6 +5286,7 @@
 g@	map.txt	/*g@*
 gD	pattern.txt	/*gD*
 gE	motion.txt	/*gE*
+gF	editing.txt	/*gF*
 gH	visual.txt	/*gH*
 gI	insert.txt	/*gI*
 gJ	change.txt	/*gJ*
@@ -7283,6 +7285,7 @@
 v_c	change.txt	/*v_c*
 v_d	change.txt	/*v_d*
 v_g?	change.txt	/*v_g?*
+v_gF	editing.txt	/*v_gF*
 v_gJ	change.txt	/*v_gJ*
 v_gV	visual.txt	/*v_gV*
 v_g]	tagsrch.txt	/*v_g]*
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index 230ec6e..f50d04f 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 7.0aa.  Last change: 2006 Feb 21
+*todo.txt*      For Vim version 7.0aa.  Last change: 2006 Feb 22
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -30,18 +30,6 @@
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
-Remove resetting "bold" from screen_start_highlight()?
-
-Using 'tabline' breaks using mouse to select a tab.  How to do that?
-See suggestion from Tony Mechelynck.
-
-P_INSECURE should be remembered for local option values separately.
-
-Completion: <Up> and <Down> don't insert completion, <PageUp> and <PageDown>
-shouldn't either.
-
-Completion: case sensitiveness when typing BS: make it an option?
-
 Completion: When back at the original word behave like after BS.
 
 Completion: When to get out of the BS state when the user keeps on typing?
@@ -89,11 +77,16 @@
 
 Crash with X command server (Ciaran McCreesh).
 
+Make virtcol([lnum, col]) work?
+
 "dip" in end empty lines at end of file leaves one line. (Matt Mzyzik)
 
 Ctags still hasn't included the patch.  Darren is looking for someone to do
 maintanance.
 
+Script ID is only remembered for global options. Should remember it for every
+local option separately.
+
 "fsutil hardlink" can create a hard link on an NTFS file system. (Daniel
 Einspanjer)  What library function can detect that?
 
diff --git a/runtime/doc/usr_41.txt b/runtime/doc/usr_41.txt
index 62b6a91..c8c7055 100644
--- a/runtime/doc/usr_41.txt
+++ b/runtime/doc/usr_41.txt
@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 7.0aa.  Last change: 2005 Nov 30
+*usr_41.txt*	For Vim version 7.0aa.  Last change: 2006 Feb 22
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -834,7 +834,7 @@
 	:  return a:num2
 	:endfunction
 
-A user defined function is called in exactly the same way as a builtin
+A user defined function is called in exactly the same way as a built-in
 function.  Only the name is different.  The Min function can be used like
 this: >
 
@@ -2245,7 +2245,7 @@
 where the part before the '#' matches the script name.  Otherwise Vim would
 not know what script to load.
 
-If you get really enthousiastic and write lots of library scripts, you may
+If you get really enthusiastic and write lots of library scripts, you may
 want to use subdirectories.  Example: >
 
 	call netlib#ftp#read('somefile')
diff --git a/runtime/doc/version7.txt b/runtime/doc/version7.txt
index 4d9fd51..addb5a2 100644
--- a/runtime/doc/version7.txt
+++ b/runtime/doc/version7.txt
@@ -1,4 +1,4 @@
-*version7.txt*  For Vim version 7.0aa.  Last change: 2006 Feb 21
+*version7.txt*  For Vim version 7.0aa.  Last change: 2006 Feb 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -388,6 +388,14 @@
 <A-RightMouse> ('mousemodel' "extend")
 			Make a blockwise selection. |<A-LeftMouse>|
 
+gF			Start editing the filename under the cursor and jump
+			to the line number following the file name.
+			(Yegappan Lakshmanan)
+
+CTRL-W F		Start editing the filename under the cursor in a new
+			window and jump to the line number following the file
+			name.  (Yegappan Lakshmanan)
+
 Insert mode commands: ~
 
 CTRL-\ CTRL-O		Execute a Normal mode command.  Like CTRL-O but
@@ -800,9 +808,6 @@
 For the '%' item in 'viminfo', allow a number to set a maximum for the number
 of buffers.
 
-The 'statusline' option can be local to the window, so that each window can
-have a different value.  (partly by Yegappan Lakshmanan)
-
 When a file looks like a shell script, check for an "exec" command that starts
 the tcl interpreter. (suggested by Alexios Zavras)
 
@@ -1018,12 +1023,20 @@
 The colortest.vim script can now be invoked directly with ":source" or
 ":runtime".
 
+The 'statusline' option can be local to the window, so that each window can
+have a different value.  (partly by Yegappan Lakshmanan)
+
 The 'statusline' option and other options that support the same format can now
 use these new features:
 - When it starts with "%!" the value is first evaluated as an expression
   before parsing the value.
 - "%#HLname#" can be used to start highlighting with HLname.
 
+When 'statusline' is set to something that causes an error message then it is
+made empty to avoid an endless redraw loop.  Also for other options, such at
+'tabline'.  ":verbose set statusline" will mention that it was set in an error
+handler.
+
 ==============================================================================
 COMPILE TIME CHANGES					*compile-changes-7*
 
@@ -1722,4 +1735,8 @@
 screen would be cleared and redrawn, causing the message about the edited file
 to be cleared.  Now set "keep_msg" to redraw the last message.
 
+For a color terminal: When the Normal HL uses bold, possibly to make the color
+lighter, and another HL group specifies a color it might become light as well.
+Now reset bold if a HL group doesn't specify bold itself.
+
  vim:tw=78:ts=8:ft=help:norl:
diff --git a/runtime/doc/windows.txt b/runtime/doc/windows.txt
index a83bdd2..97e015e 100644
--- a/runtime/doc/windows.txt
+++ b/runtime/doc/windows.txt
@@ -714,6 +714,11 @@
 		{not available when the |+file_in_path| feature was disabled
 		at compile time}
 
+CTRL-W F						*CTRL-W_F*
+		Split current window in two.  Edit file name under cursor and
+		jump to the line number following the file name. See |gF| for
+		details on how the line number is obtained.
+
 Also see |CTRL-W_CTRL-I|: open window for an included file that includes
 the keyword under the cursor.