diff --git a/src/auto/wayland/Makefile b/src/auto/wayland/Makefile
new file mode 100644
index 0000000..e88b3b8
--- /dev/null
+++ b/src/auto/wayland/Makefile
@@ -0,0 +1,52 @@
+# List of files to generate
+GEN_XML = protocols/ext-data-control-v1.xml \
+	    protocols/primary-selection-unstable-v1.xml \
+	    protocols/wlr-data-control-unstable-v1.xml \
+	    protocols/xdg-shell.xml
+GEN_SRC = ext-data-control-v1.c \
+	    primary-selection-unstable-v1.c \
+	    wlr-data-control-unstable-v1.c \
+	    xdg-shell.c
+GEN_INCLUDE = ext-data-control-v1.h \
+	    primary-selection-unstable-v1.h \
+	    wlr-data-control-unstable-v1.h \
+	    xdg-shell.h
+
+# Default target
+all: $(GEN_SRC) $(GEN_INCLUDE)
+	@if ! command -v wayland-scanner 2>&1 > /dev/null ; then \
+		echo "wayland-scanner not available, cannot generate protocol files"; \
+		false; \
+	fi
+
+ext-data-control-v1.c:
+	wayland-scanner private-code protocols/ext-data-control-v1.xml $@
+ext-data-control-v1.h:
+	wayland-scanner client-header protocols/ext-data-control-v1.xml $@
+
+wlr-data-control-unstable-v1.c:
+	wayland-scanner private-code protocols/wlr-data-control-unstable-v1.xml $@
+wlr-data-control-unstable-v1.h:
+	wayland-scanner client-header protocols/wlr-data-control-unstable-v1.xml $@
+
+primary-selection-unstable-v1.c:
+	wayland-scanner private-code protocols/primary-selection-unstable-v1.xml $@
+primary-selection-unstable-v1.h:
+	wayland-scanner client-header protocols/primary-selection-unstable-v1.xml $@
+
+xdg-shell.c:
+	wayland-scanner private-code protocols/xdg-shell.xml $@
+xdg-shell.h:
+	wayland-scanner client-header protocols/xdg-shell.xml $@
+
+$(GEN_SRC) $(GEN_INCLUDE): $(GEN_XML)
+
+$(GEN_XML):
+
+# Clean rule
+clean:
+	rm -f *.c *.h
+
+.PHONY: all clean
+
+# vim:ts=8:sw=8:tw=78
diff --git a/src/auto/wayland/README.txt b/src/auto/wayland/README.txt
new file mode 100644
index 0000000..ee0de0a
--- /dev/null
+++ b/src/auto/wayland/README.txt
@@ -0,0 +1,11 @@
+This directory contains the auto-generated protocol files for the Wayland
+System Integration.
+
+To re-generate them run make.
+
+It requires wayland-scanner to be installed, which is generally found as
+wayland-utils package in Linux distributions.
+
+Included as of Vim patch v9.1.1485 (2025 Jun 27).
+
+Initial work done by Foxe Chen.
diff --git a/src/auto/wayland/protocols/ext-data-control-v1.xml b/src/auto/wayland/protocols/ext-data-control-v1.xml
new file mode 100644
index 0000000..37ee577
--- /dev/null
+++ b/src/auto/wayland/protocols/ext-data-control-v1.xml
@@ -0,0 +1,276 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<protocol name="ext_data_control_v1">
+  <copyright>
+    Copyright © 2018 Simon Ser
+    Copyright © 2019 Ivan Molodetskikh
+    Copyright © 2024 Neal Gompa
+
+    Permission to use, copy, modify, distribute, and sell this
+    software and its documentation for any purpose is hereby granted
+    without fee, provided that the above copyright notice appear in
+    all copies and that both that copyright notice and this permission
+    notice appear in supporting documentation, and that the name of
+    the copyright holders not be used in advertising or publicity
+    pertaining to distribution of the software without specific,
+    written prior permission.  The copyright holders make no
+    representations about the suitability of this software for any
+    purpose.  It is provided "as is" without express or implied
+    warranty.
+
+    THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
+    SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
+    FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+    SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+    AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+    ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF
+    THIS SOFTWARE.
+  </copyright>
+
+  <description summary="control data devices">
+    This protocol allows a privileged client to control data devices. In
+    particular, the client will be able to manage the current selection and take
+    the role of a clipboard manager.
+
+    Warning! The protocol described in this file is currently in the testing
+    phase. Backward compatible changes may be added together with the
+    corresponding interface version bump. Backward incompatible changes can
+    only be done by creating a new major version of the extension.
+  </description>
+
+  <interface name="ext_data_control_manager_v1" version="1">
+    <description summary="manager to control data devices">
+      This interface is a manager that allows creating per-seat data device
+      controls.
+    </description>
+
+    <request name="create_data_source">
+      <description summary="create a new data source">
+        Create a new data source.
+      </description>
+      <arg name="id" type="new_id" interface="ext_data_control_source_v1"
+        summary="data source to create"/>
+    </request>
+
+    <request name="get_data_device">
+      <description summary="get a data device for a seat">
+        Create a data device that can be used to manage a seat's selection.
+      </description>
+      <arg name="id" type="new_id" interface="ext_data_control_device_v1"/>
+      <arg name="seat" type="object" interface="wl_seat"/>
+    </request>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy the manager">
+        All objects created by the manager will still remain valid, until their
+        appropriate destroy request has been called.
+      </description>
+    </request>
+  </interface>
+
+  <interface name="ext_data_control_device_v1" version="1">
+    <description summary="manage a data device for a seat">
+      This interface allows a client to manage a seat's selection.
+
+      When the seat is destroyed, this object becomes inert.
+    </description>
+
+    <request name="set_selection">
+      <description summary="copy data to the selection">
+        This request asks the compositor to set the selection to the data from
+        the source on behalf of the client.
+
+        The given source may not be used in any further set_selection or
+        set_primary_selection requests. Attempting to use a previously used
+        source triggers the used_source protocol error.
+
+        To unset the selection, set the source to NULL.
+      </description>
+      <arg name="source" type="object" interface="ext_data_control_source_v1"
+        allow-null="true"/>
+    </request>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy this data device">
+        Destroys the data device object.
+      </description>
+    </request>
+
+    <event name="data_offer">
+      <description summary="introduce a new ext_data_control_offer">
+        The data_offer event introduces a new ext_data_control_offer object,
+        which will subsequently be used in either the
+        ext_data_control_device.selection event (for the regular clipboard
+        selections) or the ext_data_control_device.primary_selection event (for
+        the primary clipboard selections). Immediately following the
+        ext_data_control_device.data_offer event, the new data_offer object
+        will send out ext_data_control_offer.offer events to describe the MIME
+        types it offers.
+      </description>
+      <arg name="id" type="new_id" interface="ext_data_control_offer_v1"/>
+    </event>
+
+    <event name="selection">
+      <description summary="advertise new selection">
+        The selection event is sent out to notify the client of a new
+        ext_data_control_offer for the selection for this device. The
+        ext_data_control_device.data_offer and the ext_data_control_offer.offer
+        events are sent out immediately before this event to introduce the data
+        offer object. The selection event is sent to a client when a new
+        selection is set. The ext_data_control_offer is valid until a new
+        ext_data_control_offer or NULL is received. The client must destroy the
+        previous selection ext_data_control_offer, if any, upon receiving this
+        event. Regardless, the previous selection will be ignored once a new
+        selection ext_data_control_offer is received.
+
+        The first selection event is sent upon binding the
+        ext_data_control_device object.
+      </description>
+      <arg name="id" type="object" interface="ext_data_control_offer_v1"
+        allow-null="true"/>
+    </event>
+
+    <event name="finished">
+      <description summary="this data control is no longer valid">
+        This data control object is no longer valid and should be destroyed by
+        the client.
+      </description>
+    </event>
+
+    <event name="primary_selection">
+      <description summary="advertise new primary selection">
+        The primary_selection event is sent out to notify the client of a new
+        ext_data_control_offer for the primary selection for this device. The
+        ext_data_control_device.data_offer and the ext_data_control_offer.offer
+        events are sent out immediately before this event to introduce the data
+        offer object. The primary_selection event is sent to a client when a
+        new primary selection is set. The ext_data_control_offer is valid until
+        a new ext_data_control_offer or NULL is received. The client must
+        destroy the previous primary selection ext_data_control_offer, if any,
+        upon receiving this event. Regardless, the previous primary selection
+        will be ignored once a new primary selection ext_data_control_offer is
+        received.
+
+        If the compositor supports primary selection, the first
+        primary_selection event is sent upon binding the
+        ext_data_control_device object.
+      </description>
+      <arg name="id" type="object" interface="ext_data_control_offer_v1"
+        allow-null="true"/>
+    </event>
+
+    <request name="set_primary_selection">
+      <description summary="copy data to the primary selection">
+        This request asks the compositor to set the primary selection to the
+        data from the source on behalf of the client.
+
+        The given source may not be used in any further set_selection or
+        set_primary_selection requests. Attempting to use a previously used
+        source triggers the used_source protocol error.
+
+        To unset the primary selection, set the source to NULL.
+
+        The compositor will ignore this request if it does not support primary
+        selection.
+      </description>
+      <arg name="source" type="object" interface="ext_data_control_source_v1"
+        allow-null="true"/>
+    </request>
+
+    <enum name="error">
+      <entry name="used_source" value="1"
+        summary="source given to set_selection or set_primary_selection was already used before"/>
+    </enum>
+  </interface>
+
+  <interface name="ext_data_control_source_v1" version="1">
+    <description summary="offer to transfer data">
+      The ext_data_control_source object is the source side of a
+      ext_data_control_offer. It is created by the source client in a data
+      transfer and provides a way to describe the offered data and a way to
+      respond to requests to transfer the data.
+    </description>
+
+    <enum name="error">
+      <entry name="invalid_offer" value="1"
+        summary="offer sent after ext_data_control_device.set_selection"/>
+    </enum>
+
+    <request name="offer">
+      <description summary="add an offered MIME type">
+        This request adds a MIME type to the set of MIME types advertised to
+        targets. Can be called several times to offer multiple types.
+
+        Calling this after ext_data_control_device.set_selection is a protocol
+        error.
+      </description>
+      <arg name="mime_type" type="string"
+        summary="MIME type offered by the data source"/>
+    </request>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy this source">
+        Destroys the data source object.
+      </description>
+    </request>
+
+    <event name="send">
+      <description summary="send the data">
+        Request for data from the client. Send the data as the specified MIME
+        type over the passed file descriptor, then close it.
+      </description>
+      <arg name="mime_type" type="string" summary="MIME type for the data"/>
+      <arg name="fd" type="fd" summary="file descriptor for the data"/>
+    </event>
+
+    <event name="cancelled">
+      <description summary="selection was cancelled">
+        This data source is no longer valid. The data source has been replaced
+        by another data source.
+
+        The client should clean up and destroy this data source.
+      </description>
+    </event>
+  </interface>
+
+  <interface name="ext_data_control_offer_v1" version="1">
+    <description summary="offer to transfer data">
+      A ext_data_control_offer represents a piece of data offered for transfer
+      by another client (the source client). The offer describes the different
+      MIME types that the data can be converted to and provides the mechanism
+      for transferring the data directly from the source client.
+    </description>
+
+    <request name="receive">
+      <description summary="request that the data is transferred">
+        To transfer the offered data, the client issues this request and
+        indicates the MIME type it wants to receive. The transfer happens
+        through the passed file descriptor (typically created with the pipe
+        system call). The source client writes the data in the MIME type
+        representation requested and then closes the file descriptor.
+
+        The receiving client reads from the read end of the pipe until EOF and
+        then closes its end, at which point the transfer is complete.
+
+        This request may happen multiple times for different MIME types.
+      </description>
+      <arg name="mime_type" type="string"
+        summary="MIME type desired by receiver"/>
+      <arg name="fd" type="fd" summary="file descriptor for data transfer"/>
+    </request>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy this offer">
+        Destroys the data offer object.
+      </description>
+    </request>
+
+    <event name="offer">
+      <description summary="advertise offered MIME type">
+        Sent immediately after creating the ext_data_control_offer object.
+        One event per offered MIME type.
+      </description>
+      <arg name="mime_type" type="string" summary="offered MIME type"/>
+    </event>
+  </interface>
+</protocol>
diff --git a/src/auto/wayland/protocols/primary-selection-unstable-v1.xml b/src/auto/wayland/protocols/primary-selection-unstable-v1.xml
new file mode 100644
index 0000000..e5a39e3
--- /dev/null
+++ b/src/auto/wayland/protocols/primary-selection-unstable-v1.xml
@@ -0,0 +1,225 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<protocol name="wp_primary_selection_unstable_v1">
+  <copyright>
+    Copyright © 2015, 2016 Red Hat
+
+    Permission is hereby granted, free of charge, to any person obtaining a
+    copy of this software and associated documentation files (the "Software"),
+    to deal in the Software without restriction, including without limitation
+    the rights to use, copy, modify, merge, publish, distribute, sublicense,
+    and/or sell copies of the Software, and to permit persons to whom the
+    Software is furnished to do so, subject to the following conditions:
+
+    The above copyright notice and this permission notice (including the next
+    paragraph) shall be included in all copies or substantial portions of the
+    Software.
+
+    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+    THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+    FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+    DEALINGS IN THE SOFTWARE.
+  </copyright>
+
+  <description summary="Primary selection protocol">
+    This protocol provides the ability to have a primary selection device to
+    match that of the X server. This primary selection is a shortcut to the
+    common clipboard selection, where text just needs to be selected in order
+    to allow copying it elsewhere. The de facto way to perform this action
+    is the middle mouse button, although it is not limited to this one.
+
+    Clients wishing to honor primary selection should create a primary
+    selection source and set it as the selection through
+    wp_primary_selection_device.set_selection whenever the text selection
+    changes. In order to minimize calls in pointer-driven text selection,
+    it should happen only once after the operation finished. Similarly,
+    a NULL source should be set when text is unselected.
+
+    wp_primary_selection_offer objects are first announced through the
+    wp_primary_selection_device.data_offer event. Immediately after this event,
+    the primary data offer will emit wp_primary_selection_offer.offer events
+    to let know of the mime types being offered.
+
+    When the primary selection changes, the client with the keyboard focus
+    will receive wp_primary_selection_device.selection events. Only the client
+    with the keyboard focus will receive such events with a non-NULL
+    wp_primary_selection_offer. Across keyboard focus changes, previously
+    focused clients will receive wp_primary_selection_device.events with a
+    NULL wp_primary_selection_offer.
+
+    In order to request the primary selection data, the client must pass
+    a recent serial pertaining to the press event that is triggering the
+    operation, if the compositor deems the serial valid and recent, the
+    wp_primary_selection_source.send event will happen in the other end
+    to let the transfer begin. The client owning the primary selection
+    should write the requested data, and close the file descriptor
+    immediately.
+
+    If the primary selection owner client disappeared during the transfer,
+    the client reading the data will receive a
+    wp_primary_selection_device.selection event with a NULL
+    wp_primary_selection_offer, the client should take this as a hint
+    to finish the reads related to the no longer existing offer.
+
+    The primary selection owner should be checking for errors during
+    writes, merely cancelling the ongoing transfer if any happened.
+  </description>
+
+  <interface name="zwp_primary_selection_device_manager_v1" version="1">
+    <description summary="X primary selection emulation">
+      The primary selection device manager is a singleton global object that
+      provides access to the primary selection. It allows to create
+      wp_primary_selection_source objects, as well as retrieving the per-seat
+      wp_primary_selection_device objects.
+    </description>
+
+    <request name="create_source">
+      <description summary="create a new primary selection source">
+        Create a new primary selection source.
+      </description>
+      <arg name="id" type="new_id" interface="zwp_primary_selection_source_v1"/>
+    </request>
+
+    <request name="get_device">
+      <description summary="create a new primary selection device">
+        Create a new data device for a given seat.
+      </description>
+      <arg name="id" type="new_id" interface="zwp_primary_selection_device_v1"/>
+      <arg name="seat" type="object" interface="wl_seat"/>
+    </request>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy the primary selection device manager">
+        Destroy the primary selection device manager.
+      </description>
+    </request>
+  </interface>
+
+  <interface name="zwp_primary_selection_device_v1" version="1">
+    <request name="set_selection">
+      <description summary="set the primary selection">
+        Replaces the current selection. The previous owner of the primary
+        selection will receive a wp_primary_selection_source.cancelled event.
+
+        To unset the selection, set the source to NULL.
+      </description>
+      <arg name="source" type="object" interface="zwp_primary_selection_source_v1" allow-null="true"/>
+      <arg name="serial" type="uint" summary="serial of the event that triggered this request"/>
+    </request>
+
+    <event name="data_offer">
+      <description summary="introduce a new wp_primary_selection_offer">
+        Introduces a new wp_primary_selection_offer object that may be used
+        to receive the current primary selection. Immediately following this
+        event, the new wp_primary_selection_offer object will send
+        wp_primary_selection_offer.offer events to describe the offered mime
+        types.
+      </description>
+      <arg name="offer" type="new_id" interface="zwp_primary_selection_offer_v1"/>
+    </event>
+
+    <event name="selection">
+      <description summary="advertise a new primary selection">
+        The wp_primary_selection_device.selection event is sent to notify the
+        client of a new primary selection. This event is sent after the
+        wp_primary_selection.data_offer event introducing this object, and after
+        the offer has announced its mimetypes through
+        wp_primary_selection_offer.offer.
+
+        The data_offer is valid until a new offer or NULL is received
+        or until the client loses keyboard focus. The client must destroy the
+        previous selection data_offer, if any, upon receiving this event.
+      </description>
+      <arg name="id" type="object" interface="zwp_primary_selection_offer_v1" allow-null="true"/>
+    </event>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy the primary selection device">
+        Destroy the primary selection device.
+      </description>
+    </request>
+  </interface>
+
+  <interface name="zwp_primary_selection_offer_v1" version="1">
+    <description summary="offer to transfer primary selection contents">
+      A wp_primary_selection_offer represents an offer to transfer the contents
+      of the primary selection clipboard to the client. Similar to
+      wl_data_offer, the offer also describes the mime types that the data can
+      be converted to and provides the mechanisms for transferring the data
+      directly to the client.
+    </description>
+
+    <request name="receive">
+      <description summary="request that the data is transferred">
+        To transfer the contents of the primary selection clipboard, the client
+        issues this request and indicates the mime type that it wants to
+        receive. The transfer happens through the passed file descriptor
+        (typically created with the pipe system call). The source client writes
+        the data in the mime type representation requested and then closes the
+        file descriptor.
+
+        The receiving client reads from the read end of the pipe until EOF and
+        closes its end, at which point the transfer is complete.
+      </description>
+      <arg name="mime_type" type="string"/>
+      <arg name="fd" type="fd"/>
+    </request>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy the primary selection offer">
+        Destroy the primary selection offer.
+      </description>
+    </request>
+
+    <event name="offer">
+      <description summary="advertise offered mime type">
+        Sent immediately after creating announcing the
+        wp_primary_selection_offer through
+        wp_primary_selection_device.data_offer. One event is sent per offered
+        mime type.
+      </description>
+      <arg name="mime_type" type="string"/>
+    </event>
+  </interface>
+
+  <interface name="zwp_primary_selection_source_v1" version="1">
+    <description summary="offer to replace the contents of the primary selection">
+      The source side of a wp_primary_selection_offer, it provides a way to
+      describe the offered data and respond to requests to transfer the
+      requested contents of the primary selection clipboard.
+    </description>
+
+    <request name="offer">
+      <description summary="add an offered mime type">
+        This request adds a mime type to the set of mime types advertised to
+        targets. Can be called several times to offer multiple types.
+      </description>
+      <arg name="mime_type" type="string"/>
+    </request>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy the primary selection source">
+        Destroy the primary selection source.
+      </description>
+    </request>
+
+    <event name="send">
+      <description summary="send the primary selection contents">
+        Request for the current primary selection contents from the client.
+        Send the specified mime type over the passed file descriptor, then
+        close it.
+      </description>
+      <arg name="mime_type" type="string"/>
+      <arg name="fd" type="fd"/>
+    </event>
+
+    <event name="cancelled">
+      <description summary="request for primary selection contents was canceled">
+        This primary selection source is no longer valid. The client should
+        clean up and destroy this primary selection source.
+      </description>
+    </event>
+  </interface>
+</protocol>
diff --git a/src/auto/wayland/protocols/wlr-data-control-unstable-v1.xml b/src/auto/wayland/protocols/wlr-data-control-unstable-v1.xml
new file mode 100644
index 0000000..75e8671
--- /dev/null
+++ b/src/auto/wayland/protocols/wlr-data-control-unstable-v1.xml
@@ -0,0 +1,278 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<protocol name="wlr_data_control_unstable_v1">
+  <copyright>
+    Copyright © 2018 Simon Ser
+    Copyright © 2019 Ivan Molodetskikh
+
+    Permission to use, copy, modify, distribute, and sell this
+    software and its documentation for any purpose is hereby granted
+    without fee, provided that the above copyright notice appear in
+    all copies and that both that copyright notice and this permission
+    notice appear in supporting documentation, and that the name of
+    the copyright holders not be used in advertising or publicity
+    pertaining to distribution of the software without specific,
+    written prior permission.  The copyright holders make no
+    representations about the suitability of this software for any
+    purpose.  It is provided "as is" without express or implied
+    warranty.
+
+    THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
+    SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
+    FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+    SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+    AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+    ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF
+    THIS SOFTWARE.
+  </copyright>
+
+  <description summary="control data devices">
+    This protocol allows a privileged client to control data devices. In
+    particular, the client will be able to manage the current selection and take
+    the role of a clipboard manager.
+
+    Warning! The protocol described in this file is experimental and
+    backward incompatible changes may be made. Backward compatible changes
+    may be added together with the corresponding interface version bump.
+    Backward incompatible changes are done by bumping the version number in
+    the protocol and interface names and resetting the interface version.
+    Once the protocol is to be declared stable, the 'z' prefix and the
+    version number in the protocol and interface names are removed and the
+    interface version number is reset.
+  </description>
+
+  <interface name="zwlr_data_control_manager_v1" version="2">
+    <description summary="manager to control data devices">
+      This interface is a manager that allows creating per-seat data device
+      controls.
+    </description>
+
+    <request name="create_data_source">
+      <description summary="create a new data source">
+        Create a new data source.
+      </description>
+      <arg name="id" type="new_id" interface="zwlr_data_control_source_v1"
+        summary="data source to create"/>
+    </request>
+
+    <request name="get_data_device">
+      <description summary="get a data device for a seat">
+        Create a data device that can be used to manage a seat's selection.
+      </description>
+      <arg name="id" type="new_id" interface="zwlr_data_control_device_v1"/>
+      <arg name="seat" type="object" interface="wl_seat"/>
+    </request>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy the manager">
+        All objects created by the manager will still remain valid, until their
+        appropriate destroy request has been called.
+      </description>
+    </request>
+  </interface>
+
+  <interface name="zwlr_data_control_device_v1" version="2">
+    <description summary="manage a data device for a seat">
+      This interface allows a client to manage a seat's selection.
+
+      When the seat is destroyed, this object becomes inert.
+    </description>
+
+    <request name="set_selection">
+      <description summary="copy data to the selection">
+        This request asks the compositor to set the selection to the data from
+        the source on behalf of the client.
+
+        The given source may not be used in any further set_selection or
+        set_primary_selection requests. Attempting to use a previously used
+        source is a protocol error.
+
+        To unset the selection, set the source to NULL.
+      </description>
+      <arg name="source" type="object" interface="zwlr_data_control_source_v1"
+        allow-null="true"/>
+    </request>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy this data device">
+        Destroys the data device object.
+      </description>
+    </request>
+
+    <event name="data_offer">
+      <description summary="introduce a new wlr_data_control_offer">
+        The data_offer event introduces a new wlr_data_control_offer object,
+        which will subsequently be used in either the
+        wlr_data_control_device.selection event (for the regular clipboard
+        selections) or the wlr_data_control_device.primary_selection event (for
+        the primary clipboard selections). Immediately following the
+        wlr_data_control_device.data_offer event, the new data_offer object
+        will send out wlr_data_control_offer.offer events to describe the MIME
+        types it offers.
+      </description>
+      <arg name="id" type="new_id" interface="zwlr_data_control_offer_v1"/>
+    </event>
+
+    <event name="selection">
+      <description summary="advertise new selection">
+        The selection event is sent out to notify the client of a new
+        wlr_data_control_offer for the selection for this device. The
+        wlr_data_control_device.data_offer and the wlr_data_control_offer.offer
+        events are sent out immediately before this event to introduce the data
+        offer object. The selection event is sent to a client when a new
+        selection is set. The wlr_data_control_offer is valid until a new
+        wlr_data_control_offer or NULL is received. The client must destroy the
+        previous selection wlr_data_control_offer, if any, upon receiving this
+        event.
+
+        The first selection event is sent upon binding the
+        wlr_data_control_device object.
+      </description>
+      <arg name="id" type="object" interface="zwlr_data_control_offer_v1"
+        allow-null="true"/>
+    </event>
+
+    <event name="finished">
+      <description summary="this data control is no longer valid">
+        This data control object is no longer valid and should be destroyed by
+        the client.
+      </description>
+    </event>
+
+    <!-- Version 2 additions -->
+
+    <event name="primary_selection" since="2">
+      <description summary="advertise new primary selection">
+        The primary_selection event is sent out to notify the client of a new
+        wlr_data_control_offer for the primary selection for this device. The
+        wlr_data_control_device.data_offer and the wlr_data_control_offer.offer
+        events are sent out immediately before this event to introduce the data
+        offer object. The primary_selection event is sent to a client when a
+        new primary selection is set. The wlr_data_control_offer is valid until
+        a new wlr_data_control_offer or NULL is received. The client must
+        destroy the previous primary selection wlr_data_control_offer, if any,
+        upon receiving this event.
+
+        If the compositor supports primary selection, the first
+        primary_selection event is sent upon binding the
+        wlr_data_control_device object.
+      </description>
+      <arg name="id" type="object" interface="zwlr_data_control_offer_v1"
+        allow-null="true"/>
+    </event>
+
+    <request name="set_primary_selection" since="2">
+      <description summary="copy data to the primary selection">
+        This request asks the compositor to set the primary selection to the
+        data from the source on behalf of the client.
+
+        The given source may not be used in any further set_selection or
+        set_primary_selection requests. Attempting to use a previously used
+        source is a protocol error.
+
+        To unset the primary selection, set the source to NULL.
+
+        The compositor will ignore this request if it does not support primary
+        selection.
+      </description>
+      <arg name="source" type="object" interface="zwlr_data_control_source_v1"
+        allow-null="true"/>
+    </request>
+
+    <enum name="error" since="2">
+      <entry name="used_source" value="1"
+        summary="source given to set_selection or set_primary_selection was already used before"/>
+    </enum>
+  </interface>
+
+  <interface name="zwlr_data_control_source_v1" version="1">
+    <description summary="offer to transfer data">
+      The wlr_data_control_source object is the source side of a
+      wlr_data_control_offer. It is created by the source client in a data
+      transfer and provides a way to describe the offered data and a way to
+      respond to requests to transfer the data.
+    </description>
+
+    <enum name="error">
+      <entry name="invalid_offer" value="1"
+        summary="offer sent after wlr_data_control_device.set_selection"/>
+    </enum>
+
+    <request name="offer">
+      <description summary="add an offered MIME type">
+        This request adds a MIME type to the set of MIME types advertised to
+        targets. Can be called several times to offer multiple types.
+
+        Calling this after wlr_data_control_device.set_selection is a protocol
+        error.
+      </description>
+      <arg name="mime_type" type="string"
+        summary="MIME type offered by the data source"/>
+    </request>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy this source">
+        Destroys the data source object.
+      </description>
+    </request>
+
+    <event name="send">
+      <description summary="send the data">
+        Request for data from the client. Send the data as the specified MIME
+        type over the passed file descriptor, then close it.
+      </description>
+      <arg name="mime_type" type="string" summary="MIME type for the data"/>
+      <arg name="fd" type="fd" summary="file descriptor for the data"/>
+    </event>
+
+    <event name="cancelled">
+      <description summary="selection was cancelled">
+        This data source is no longer valid. The data source has been replaced
+        by another data source.
+
+        The client should clean up and destroy this data source.
+      </description>
+    </event>
+  </interface>
+
+  <interface name="zwlr_data_control_offer_v1" version="1">
+    <description summary="offer to transfer data">
+      A wlr_data_control_offer represents a piece of data offered for transfer
+      by another client (the source client). The offer describes the different
+      MIME types that the data can be converted to and provides the mechanism
+      for transferring the data directly from the source client.
+    </description>
+
+    <request name="receive">
+      <description summary="request that the data is transferred">
+        To transfer the offered data, the client issues this request and
+        indicates the MIME type it wants to receive. The transfer happens
+        through the passed file descriptor (typically created with the pipe
+        system call). The source client writes the data in the MIME type
+        representation requested and then closes the file descriptor.
+
+        The receiving client reads from the read end of the pipe until EOF and
+        then closes its end, at which point the transfer is complete.
+
+        This request may happen multiple times for different MIME types.
+      </description>
+      <arg name="mime_type" type="string"
+        summary="MIME type desired by receiver"/>
+      <arg name="fd" type="fd" summary="file descriptor for data transfer"/>
+    </request>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy this offer">
+        Destroys the data offer object.
+      </description>
+    </request>
+
+    <event name="offer">
+      <description summary="advertise offered MIME type">
+        Sent immediately after creating the wlr_data_control_offer object.
+        One event per offered MIME type.
+      </description>
+      <arg name="mime_type" type="string" summary="offered MIME type"/>
+    </event>
+  </interface>
+</protocol>
diff --git a/src/auto/wayland/protocols/xdg-shell.xml b/src/auto/wayland/protocols/xdg-shell.xml
new file mode 100644
index 0000000..c4d4685
--- /dev/null
+++ b/src/auto/wayland/protocols/xdg-shell.xml
@@ -0,0 +1,1415 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<protocol name="xdg_shell">
+
+  <copyright>
+    Copyright © 2008-2013 Kristian Høgsberg
+    Copyright © 2013      Rafael Antognolli
+    Copyright © 2013      Jasper St. Pierre
+    Copyright © 2010-2013 Intel Corporation
+    Copyright © 2015-2017 Samsung Electronics Co., Ltd
+    Copyright © 2015-2017 Red Hat Inc.
+
+    Permission is hereby granted, free of charge, to any person obtaining a
+    copy of this software and associated documentation files (the "Software"),
+    to deal in the Software without restriction, including without limitation
+    the rights to use, copy, modify, merge, publish, distribute, sublicense,
+    and/or sell copies of the Software, and to permit persons to whom the
+    Software is furnished to do so, subject to the following conditions:
+
+    The above copyright notice and this permission notice (including the next
+    paragraph) shall be included in all copies or substantial portions of the
+    Software.
+
+    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+    THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+    FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+    DEALINGS IN THE SOFTWARE.
+  </copyright>
+
+  <interface name="xdg_wm_base" version="7">
+    <description summary="create desktop-style surfaces">
+      The xdg_wm_base interface is exposed as a global object enabling clients
+      to turn their wl_surfaces into windows in a desktop environment. It
+      defines the basic functionality needed for clients and the compositor to
+      create windows that can be dragged, resized, maximized, etc, as well as
+      creating transient windows such as popup menus.
+    </description>
+
+    <enum name="error">
+      <entry name="role" value="0" summary="given wl_surface has another role"/>
+      <entry name="defunct_surfaces" value="1"
+	     summary="xdg_wm_base was destroyed before children"/>
+      <entry name="not_the_topmost_popup" value="2"
+	     summary="the client tried to map or destroy a non-topmost popup"/>
+      <entry name="invalid_popup_parent" value="3"
+	     summary="the client specified an invalid popup parent surface"/>
+      <entry name="invalid_surface_state" value="4"
+	     summary="the client provided an invalid surface state"/>
+      <entry name="invalid_positioner" value="5"
+	     summary="the client provided an invalid positioner"/>
+      <entry name="unresponsive" value="6"
+	     summary="the client didn’t respond to a ping event in time"/>
+    </enum>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy xdg_wm_base">
+	Destroy this xdg_wm_base object.
+
+	Destroying a bound xdg_wm_base object while there are surfaces
+	still alive created by this xdg_wm_base object instance is illegal
+	and will result in a defunct_surfaces error.
+      </description>
+    </request>
+
+    <request name="create_positioner">
+      <description summary="create a positioner object">
+	Create a positioner object. A positioner object is used to position
+	surfaces relative to some parent surface. See the interface description
+	and xdg_surface.get_popup for details.
+      </description>
+      <arg name="id" type="new_id" interface="xdg_positioner"/>
+    </request>
+
+    <request name="get_xdg_surface">
+      <description summary="create a shell surface from a surface">
+	This creates an xdg_surface for the given surface. While xdg_surface
+	itself is not a role, the corresponding surface may only be assigned
+	a role extending xdg_surface, such as xdg_toplevel or xdg_popup. It is
+	illegal to create an xdg_surface for a wl_surface which already has an
+	assigned role and this will result in a role error.
+
+	This creates an xdg_surface for the given surface. An xdg_surface is
+	used as basis to define a role to a given surface, such as xdg_toplevel
+	or xdg_popup. It also manages functionality shared between xdg_surface
+	based surface roles.
+
+	See the documentation of xdg_surface for more details about what an
+	xdg_surface is and how it is used.
+      </description>
+      <arg name="id" type="new_id" interface="xdg_surface"/>
+      <arg name="surface" type="object" interface="wl_surface"/>
+    </request>
+
+    <request name="pong">
+      <description summary="respond to a ping event">
+	A client must respond to a ping event with a pong request or
+	the client may be deemed unresponsive. See xdg_wm_base.ping
+	and xdg_wm_base.error.unresponsive.
+      </description>
+      <arg name="serial" type="uint" summary="serial of the ping event"/>
+    </request>
+
+    <event name="ping">
+      <description summary="check if the client is alive">
+	The ping event asks the client if it's still alive. Pass the
+	serial specified in the event back to the compositor by sending
+	a "pong" request back with the specified serial. See xdg_wm_base.pong.
+
+	Compositors can use this to determine if the client is still
+	alive. It's unspecified what will happen if the client doesn't
+	respond to the ping request, or in what timeframe. Clients should
+	try to respond in a reasonable amount of time. The “unresponsive”
+	error is provided for compositors that wish to disconnect unresponsive
+	clients.
+
+	A compositor is free to ping in any way it wants, but a client must
+	always respond to any xdg_wm_base object it created.
+      </description>
+      <arg name="serial" type="uint" summary="pass this to the pong request"/>
+    </event>
+  </interface>
+
+  <interface name="xdg_positioner" version="7">
+    <description summary="child surface positioner">
+      The xdg_positioner provides a collection of rules for the placement of a
+      child surface relative to a parent surface. Rules can be defined to ensure
+      the child surface remains within the visible area's borders, and to
+      specify how the child surface changes its position, such as sliding along
+      an axis, or flipping around a rectangle. These positioner-created rules are
+      constrained by the requirement that a child surface must intersect with or
+      be at least partially adjacent to its parent surface.
+
+      See the various requests for details about possible rules.
+
+      At the time of the request, the compositor makes a copy of the rules
+      specified by the xdg_positioner. Thus, after the request is complete the
+      xdg_positioner object can be destroyed or reused; further changes to the
+      object will have no effect on previous usages.
+
+      For an xdg_positioner object to be considered complete, it must have a
+      non-zero size set by set_size, and a non-zero anchor rectangle set by
+      set_anchor_rect. Passing an incomplete xdg_positioner object when
+      positioning a surface raises an invalid_positioner error.
+    </description>
+
+    <enum name="error">
+      <entry name="invalid_input" value="0" summary="invalid input provided"/>
+    </enum>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy the xdg_positioner object">
+	Notify the compositor that the xdg_positioner will no longer be used.
+      </description>
+    </request>
+
+    <request name="set_size">
+      <description summary="set the size of the to-be positioned rectangle">
+	Set the size of the surface that is to be positioned with the positioner
+	object. The size is in surface-local coordinates and corresponds to the
+	window geometry. See xdg_surface.set_window_geometry.
+
+	If a zero or negative size is set the invalid_input error is raised.
+      </description>
+      <arg name="width" type="int" summary="width of positioned rectangle"/>
+      <arg name="height" type="int" summary="height of positioned rectangle"/>
+    </request>
+
+    <request name="set_anchor_rect">
+      <description summary="set the anchor rectangle within the parent surface">
+	Specify the anchor rectangle within the parent surface that the child
+	surface will be placed relative to. The rectangle is relative to the
+	window geometry as defined by xdg_surface.set_window_geometry of the
+	parent surface.
+
+	When the xdg_positioner object is used to position a child surface, the
+	anchor rectangle may not extend outside the window geometry of the
+	positioned child's parent surface.
+
+	If a negative size is set the invalid_input error is raised.
+      </description>
+      <arg name="x" type="int" summary="x position of anchor rectangle"/>
+      <arg name="y" type="int" summary="y position of anchor rectangle"/>
+      <arg name="width" type="int" summary="width of anchor rectangle"/>
+      <arg name="height" type="int" summary="height of anchor rectangle"/>
+    </request>
+
+    <enum name="anchor">
+      <entry name="none" value="0"/>
+      <entry name="top" value="1"/>
+      <entry name="bottom" value="2"/>
+      <entry name="left" value="3"/>
+      <entry name="right" value="4"/>
+      <entry name="top_left" value="5"/>
+      <entry name="bottom_left" value="6"/>
+      <entry name="top_right" value="7"/>
+      <entry name="bottom_right" value="8"/>
+    </enum>
+
+    <request name="set_anchor">
+      <description summary="set anchor rectangle anchor">
+	Defines the anchor point for the anchor rectangle. The specified anchor
+	is used derive an anchor point that the child surface will be
+	positioned relative to. If a corner anchor is set (e.g. 'top_left' or
+	'bottom_right'), the anchor point will be at the specified corner;
+	otherwise, the derived anchor point will be centered on the specified
+	edge, or in the center of the anchor rectangle if no edge is specified.
+      </description>
+      <arg name="anchor" type="uint" enum="anchor"
+	   summary="anchor"/>
+    </request>
+
+    <enum name="gravity">
+      <entry name="none" value="0"/>
+      <entry name="top" value="1"/>
+      <entry name="bottom" value="2"/>
+      <entry name="left" value="3"/>
+      <entry name="right" value="4"/>
+      <entry name="top_left" value="5"/>
+      <entry name="bottom_left" value="6"/>
+      <entry name="top_right" value="7"/>
+      <entry name="bottom_right" value="8"/>
+    </enum>
+
+    <request name="set_gravity">
+      <description summary="set child surface gravity">
+	Defines in what direction a surface should be positioned, relative to
+	the anchor point of the parent surface. If a corner gravity is
+	specified (e.g. 'bottom_right' or 'top_left'), then the child surface
+	will be placed towards the specified gravity; otherwise, the child
+	surface will be centered over the anchor point on any axis that had no
+	gravity specified. If the gravity is not in the ‘gravity’ enum, an
+	invalid_input error is raised.
+      </description>
+      <arg name="gravity" type="uint" enum="gravity"
+	   summary="gravity direction"/>
+    </request>
+
+    <enum name="constraint_adjustment" bitfield="true">
+      <description summary="constraint adjustments">
+	The constraint adjustment value define ways the compositor will adjust
+	the position of the surface, if the unadjusted position would result
+	in the surface being partly constrained.
+
+	Whether a surface is considered 'constrained' is left to the compositor
+	to determine. For example, the surface may be partly outside the
+	compositor's defined 'work area', thus necessitating the child surface's
+	position be adjusted until it is entirely inside the work area.
+
+	The adjustments can be combined, according to a defined precedence: 1)
+	Flip, 2) Slide, 3) Resize.
+      </description>
+      <entry name="none" value="0">
+	<description summary="don't move the child surface when constrained">
+	  Don't alter the surface position even if it is constrained on some
+	  axis, for example partially outside the edge of an output.
+	</description>
+      </entry>
+      <entry name="slide_x" value="1">
+	<description summary="move along the x axis until unconstrained">
+	  Slide the surface along the x axis until it is no longer constrained.
+
+	  First try to slide towards the direction of the gravity on the x axis
+	  until either the edge in the opposite direction of the gravity is
+	  unconstrained or the edge in the direction of the gravity is
+	  constrained.
+
+	  Then try to slide towards the opposite direction of the gravity on the
+	  x axis until either the edge in the direction of the gravity is
+	  unconstrained or the edge in the opposite direction of the gravity is
+	  constrained.
+	</description>
+      </entry>
+      <entry name="slide_y" value="2">
+	<description summary="move along the y axis until unconstrained">
+	  Slide the surface along the y axis until it is no longer constrained.
+
+	  First try to slide towards the direction of the gravity on the y axis
+	  until either the edge in the opposite direction of the gravity is
+	  unconstrained or the edge in the direction of the gravity is
+	  constrained.
+
+	  Then try to slide towards the opposite direction of the gravity on the
+	  y axis until either the edge in the direction of the gravity is
+	  unconstrained or the edge in the opposite direction of the gravity is
+	  constrained.
+	</description>
+      </entry>
+      <entry name="flip_x" value="4">
+	<description summary="invert the anchor and gravity on the x axis">
+	  Invert the anchor and gravity on the x axis if the surface is
+	  constrained on the x axis. For example, if the left edge of the
+	  surface is constrained, the gravity is 'left' and the anchor is
+	  'left', change the gravity to 'right' and the anchor to 'right'.
+
+	  If the adjusted position also ends up being constrained, the resulting
+	  position of the flip_x adjustment will be the one before the
+	  adjustment.
+	</description>
+      </entry>
+      <entry name="flip_y" value="8">
+	<description summary="invert the anchor and gravity on the y axis">
+	  Invert the anchor and gravity on the y axis if the surface is
+	  constrained on the y axis. For example, if the bottom edge of the
+	  surface is constrained, the gravity is 'bottom' and the anchor is
+	  'bottom', change the gravity to 'top' and the anchor to 'top'.
+
+	  The adjusted position is calculated given the original anchor
+	  rectangle and offset, but with the new flipped anchor and gravity
+	  values.
+
+	  If the adjusted position also ends up being constrained, the resulting
+	  position of the flip_y adjustment will be the one before the
+	  adjustment.
+	</description>
+      </entry>
+      <entry name="resize_x" value="16">
+	<description summary="horizontally resize the surface">
+	  Resize the surface horizontally so that it is completely
+	  unconstrained.
+	</description>
+      </entry>
+      <entry name="resize_y" value="32">
+	<description summary="vertically resize the surface">
+	  Resize the surface vertically so that it is completely unconstrained.
+	</description>
+      </entry>
+    </enum>
+
+    <request name="set_constraint_adjustment">
+      <description summary="set the adjustment to be done when constrained">
+	Specify how the window should be positioned if the originally intended
+	position caused the surface to be constrained, meaning at least
+	partially outside positioning boundaries set by the compositor. The
+	adjustment is set by constructing a bitmask describing the adjustment to
+	be made when the surface is constrained on that axis.
+
+	If no bit for one axis is set, the compositor will assume that the child
+	surface should not change its position on that axis when constrained.
+
+	If more than one bit for one axis is set, the order of how adjustments
+	are applied is specified in the corresponding adjustment descriptions.
+
+	The default adjustment is none.
+      </description>
+      <arg name="constraint_adjustment" type="uint" enum="constraint_adjustment"
+	   summary="bit mask of constraint adjustments"/>
+    </request>
+
+    <request name="set_offset">
+      <description summary="set surface position offset">
+	Specify the surface position offset relative to the position of the
+	anchor on the anchor rectangle and the anchor on the surface. For
+	example if the anchor of the anchor rectangle is at (x, y), the surface
+	has the gravity bottom|right, and the offset is (ox, oy), the calculated
+	surface position will be (x + ox, y + oy). The offset position of the
+	surface is the one used for constraint testing. See
+	set_constraint_adjustment.
+
+	An example use case is placing a popup menu on top of a user interface
+	element, while aligning the user interface element of the parent surface
+	with some user interface element placed somewhere in the popup surface.
+      </description>
+      <arg name="x" type="int" summary="surface position x offset"/>
+      <arg name="y" type="int" summary="surface position y offset"/>
+    </request>
+
+    <!-- Version 3 additions -->
+
+    <request name="set_reactive" since="3">
+      <description summary="continuously reconstrain the surface">
+	When set reactive, the surface is reconstrained if the conditions used
+	for constraining changed, e.g. the parent window moved.
+
+	If the conditions changed and the popup was reconstrained, an
+	xdg_popup.configure event is sent with updated geometry, followed by an
+	xdg_surface.configure event.
+      </description>
+    </request>
+
+    <request name="set_parent_size" since="3">
+      <description summary="">
+	Set the parent window geometry the compositor should use when
+	positioning the popup. The compositor may use this information to
+	determine the future state the popup should be constrained using. If
+	this doesn't match the dimension of the parent the popup is eventually
+	positioned against, the behavior is undefined.
+
+	The arguments are given in the surface-local coordinate space.
+      </description>
+      <arg name="parent_width" type="int"
+	   summary="future window geometry width of parent"/>
+      <arg name="parent_height" type="int"
+	   summary="future window geometry height of parent"/>
+    </request>
+
+    <request name="set_parent_configure" since="3">
+      <description summary="set parent configure this is a response to">
+	Set the serial of an xdg_surface.configure event this positioner will be
+	used in response to. The compositor may use this information together
+	with set_parent_size to determine what future state the popup should be
+	constrained using.
+      </description>
+      <arg name="serial" type="uint"
+	   summary="serial of parent configure event"/>
+    </request>
+  </interface>
+
+  <interface name="xdg_surface" version="7">
+    <description summary="desktop user interface surface base interface">
+      An interface that may be implemented by a wl_surface, for
+      implementations that provide a desktop-style user interface.
+
+      It provides a base set of functionality required to construct user
+      interface elements requiring management by the compositor, such as
+      toplevel windows, menus, etc. The types of functionality are split into
+      xdg_surface roles.
+
+      Creating an xdg_surface does not set the role for a wl_surface. In order
+      to map an xdg_surface, the client must create a role-specific object
+      using, e.g., get_toplevel, get_popup. The wl_surface for any given
+      xdg_surface can have at most one role, and may not be assigned any role
+      not based on xdg_surface.
+
+      A role must be assigned before any other requests are made to the
+      xdg_surface object.
+
+      The client must call wl_surface.commit on the corresponding wl_surface
+      for the xdg_surface state to take effect.
+
+      Creating an xdg_surface from a wl_surface which has a buffer attached or
+      committed is a client error, and any attempts by a client to attach or
+      manipulate a buffer prior to the first xdg_surface.configure call must
+      also be treated as errors.
+
+      After creating a role-specific object and setting it up (e.g. by sending
+      the title, app ID, size constraints, parent, etc), the client must
+      perform an initial commit without any buffer attached. The compositor
+      will reply with initial wl_surface state such as
+      wl_surface.preferred_buffer_scale followed by an xdg_surface.configure
+      event. The client must acknowledge it and is then allowed to attach a
+      buffer to map the surface.
+
+      Mapping an xdg_surface-based role surface is defined as making it
+      possible for the surface to be shown by the compositor. Note that
+      a mapped surface is not guaranteed to be visible once it is mapped.
+
+      For an xdg_surface to be mapped by the compositor, the following
+      conditions must be met:
+      (1) the client has assigned an xdg_surface-based role to the surface
+      (2) the client has set and committed the xdg_surface state and the
+	  role-dependent state to the surface
+      (3) the client has committed a buffer to the surface
+
+      A newly-unmapped surface is considered to have met condition (1) out
+      of the 3 required conditions for mapping a surface if its role surface
+      has not been destroyed, i.e. the client must perform the initial commit
+      again before attaching a buffer.
+    </description>
+
+    <enum name="error">
+      <entry name="not_constructed" value="1"
+	     summary="Surface was not fully constructed"/>
+      <entry name="already_constructed" value="2"
+	     summary="Surface was already constructed"/>
+      <entry name="unconfigured_buffer" value="3"
+	     summary="Attaching a buffer to an unconfigured surface"/>
+      <entry name="invalid_serial" value="4"
+	     summary="Invalid serial number when acking a configure event"/>
+      <entry name="invalid_size" value="5"
+	     summary="Width or height was zero or negative"/>
+      <entry name="defunct_role_object" value="6"
+	     summary="Surface was destroyed before its role object"/>
+    </enum>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy the xdg_surface">
+	Destroy the xdg_surface object. An xdg_surface must only be destroyed
+	after its role object has been destroyed, otherwise
+	a defunct_role_object error is raised.
+      </description>
+    </request>
+
+    <request name="get_toplevel">
+      <description summary="assign the xdg_toplevel surface role">
+	This creates an xdg_toplevel object for the given xdg_surface and gives
+	the associated wl_surface the xdg_toplevel role.
+
+	See the documentation of xdg_toplevel for more details about what an
+	xdg_toplevel is and how it is used.
+      </description>
+      <arg name="id" type="new_id" interface="xdg_toplevel"/>
+    </request>
+
+    <request name="get_popup">
+      <description summary="assign the xdg_popup surface role">
+	This creates an xdg_popup object for the given xdg_surface and gives
+	the associated wl_surface the xdg_popup role.
+
+	If null is passed as a parent, a parent surface must be specified using
+	some other protocol, before committing the initial state.
+
+	See the documentation of xdg_popup for more details about what an
+	xdg_popup is and how it is used.
+      </description>
+      <arg name="id" type="new_id" interface="xdg_popup"/>
+      <arg name="parent" type="object" interface="xdg_surface" allow-null="true"/>
+      <arg name="positioner" type="object" interface="xdg_positioner"/>
+    </request>
+
+    <request name="set_window_geometry">
+      <description summary="set the new window geometry">
+	The window geometry of a surface is its "visible bounds" from the
+	user's perspective. Client-side decorations often have invisible
+	portions like drop-shadows which should be ignored for the
+	purposes of aligning, placing and constraining windows.
+
+	The window geometry is double-buffered state, see wl_surface.commit.
+
+	When maintaining a position, the compositor should treat the (x, y)
+	coordinate of the window geometry as the top left corner of the window.
+	A client changing the (x, y) window geometry coordinate should in
+	general not alter the position of the window.
+
+	Once the window geometry of the surface is set, it is not possible to
+	unset it, and it will remain the same until set_window_geometry is
+	called again, even if a new subsurface or buffer is attached.
+
+	If never set, the value is the full bounds of the surface,
+	including any subsurfaces. This updates dynamically on every
+	commit. This unset is meant for extremely simple clients.
+
+	The arguments are given in the surface-local coordinate space of
+	the wl_surface associated with this xdg_surface, and may extend outside
+	of the wl_surface itself to mark parts of the subsurface tree as part of
+	the window geometry.
+
+	When applied, the effective window geometry will be the set window
+	geometry clamped to the bounding rectangle of the combined
+	geometry of the surface of the xdg_surface and the associated
+	subsurfaces.
+
+	The effective geometry will not be recalculated unless a new call to
+	set_window_geometry is done and the new pending surface state is
+	subsequently applied.
+
+	The width and height of the effective window geometry must be
+	greater than zero. Setting an invalid size will raise an
+	invalid_size error.
+      </description>
+      <arg name="x" type="int"/>
+      <arg name="y" type="int"/>
+      <arg name="width" type="int"/>
+      <arg name="height" type="int"/>
+    </request>
+
+    <request name="ack_configure">
+      <description summary="ack a configure event">
+	When a configure event is received, if a client commits the
+	surface in response to the configure event, then the client
+	must make an ack_configure request sometime before the commit
+	request, passing along the serial of the configure event.
+
+	For instance, for toplevel surfaces the compositor might use this
+	information to move a surface to the top left only when the client has
+	drawn itself for the maximized or fullscreen state.
+
+	If the client receives multiple configure events before it
+	can respond to one, it only has to ack the last configure event.
+	Acking a configure event that was never sent raises an invalid_serial
+	error.
+
+	A client is not required to commit immediately after sending
+	an ack_configure request - it may even ack_configure several times
+	before its next surface commit.
+
+	A client may send multiple ack_configure requests before committing, but
+	only the last request sent before a commit indicates which configure
+	event the client really is responding to.
+
+	Sending an ack_configure request consumes the serial number sent with
+	the request, as well as serial numbers sent by all configure events
+	sent on this xdg_surface prior to the configure event referenced by
+	the committed serial.
+
+	It is an error to issue multiple ack_configure requests referencing a
+	serial from the same configure event, or to issue an ack_configure
+	request referencing a serial from a configure event issued before the
+	event identified by the last ack_configure request for the same
+	xdg_surface. Doing so will raise an invalid_serial error.
+      </description>
+      <arg name="serial" type="uint" summary="the serial from the configure event"/>
+    </request>
+
+    <event name="configure">
+      <description summary="suggest a surface change">
+	The configure event marks the end of a configure sequence. A configure
+	sequence is a set of one or more events configuring the state of the
+	xdg_surface, including the final xdg_surface.configure event.
+
+	Where applicable, xdg_surface surface roles will during a configure
+	sequence extend this event as a latched state sent as events before the
+	xdg_surface.configure event. Such events should be considered to make up
+	a set of atomically applied configuration states, where the
+	xdg_surface.configure commits the accumulated state.
+
+	Clients should arrange their surface for the new states, and then send
+	an ack_configure request with the serial sent in this configure event at
+	some point before committing the new surface.
+
+	If the client receives multiple configure events before it can respond
+	to one, it is free to discard all but the last event it received.
+      </description>
+      <arg name="serial" type="uint" summary="serial of the configure event"/>
+    </event>
+
+  </interface>
+
+  <interface name="xdg_toplevel" version="7">
+    <description summary="toplevel surface">
+      This interface defines an xdg_surface role which allows a surface to,
+      among other things, set window-like properties such as maximize,
+      fullscreen, and minimize, set application-specific metadata like title and
+      id, and well as trigger user interactive operations such as interactive
+      resize and move.
+
+      A xdg_toplevel by default is responsible for providing the full intended
+      visual representation of the toplevel, which depending on the window
+      state, may mean things like a title bar, window controls and drop shadow.
+
+      Unmapping an xdg_toplevel means that the surface cannot be shown
+      by the compositor until it is explicitly mapped again.
+      All active operations (e.g., move, resize) are canceled and all
+      attributes (e.g. title, state, stacking, ...) are discarded for
+      an xdg_toplevel surface when it is unmapped. The xdg_toplevel returns to
+      the state it had right after xdg_surface.get_toplevel. The client
+      can re-map the toplevel by performing a commit without any buffer
+      attached, waiting for a configure event and handling it as usual (see
+      xdg_surface description).
+
+      Attaching a null buffer to a toplevel unmaps the surface.
+    </description>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy the xdg_toplevel">
+	This request destroys the role surface and unmaps the surface;
+	see "Unmapping" behavior in interface section for details.
+      </description>
+    </request>
+
+    <enum name="error">
+      <entry name="invalid_resize_edge" value="0" summary="provided value is
+        not a valid variant of the resize_edge enum"/>
+      <entry name="invalid_parent" value="1"
+        summary="invalid parent toplevel"/>
+      <entry name="invalid_size" value="2"
+	summary="client provided an invalid min or max size"/>
+    </enum>
+
+    <request name="set_parent">
+      <description summary="set the parent of this surface">
+	Set the "parent" of this surface. This surface should be stacked
+	above the parent surface and all other ancestor surfaces.
+
+	Parent surfaces should be set on dialogs, toolboxes, or other
+	"auxiliary" surfaces, so that the parent is raised when the dialog
+	is raised.
+
+	Setting a null parent for a child surface unsets its parent. Setting
+	a null parent for a surface which currently has no parent is a no-op.
+
+	Only mapped surfaces can have child surfaces. Setting a parent which
+	is not mapped is equivalent to setting a null parent. If a surface
+	becomes unmapped, its children's parent is set to the parent of
+	the now-unmapped surface. If the now-unmapped surface has no parent,
+	its children's parent is unset. If the now-unmapped surface becomes
+	mapped again, its parent-child relationship is not restored.
+
+	The parent toplevel must not be one of the child toplevel's
+	descendants, and the parent must be different from the child toplevel,
+	otherwise the invalid_parent protocol error is raised.
+      </description>
+      <arg name="parent" type="object" interface="xdg_toplevel" allow-null="true"/>
+    </request>
+
+    <request name="set_title">
+      <description summary="set surface title">
+	Set a short title for the surface.
+
+	This string may be used to identify the surface in a task bar,
+	window list, or other user interface elements provided by the
+	compositor.
+
+	The string must be encoded in UTF-8.
+      </description>
+      <arg name="title" type="string"/>
+    </request>
+
+    <request name="set_app_id">
+      <description summary="set application ID">
+	Set an application identifier for the surface.
+
+	The app ID identifies the general class of applications to which
+	the surface belongs. The compositor can use this to group multiple
+	surfaces together, or to determine how to launch a new application.
+
+	For D-Bus activatable applications, the app ID is used as the D-Bus
+	service name.
+
+	The compositor shell will try to group application surfaces together
+	by their app ID. As a best practice, it is suggested to select app
+	ID's that match the basename of the application's .desktop file.
+	For example, "org.freedesktop.FooViewer" where the .desktop file is
+	"org.freedesktop.FooViewer.desktop".
+
+	Like other properties, a set_app_id request can be sent after the
+	xdg_toplevel has been mapped to update the property.
+
+	See the desktop-entry specification [0] for more details on
+	application identifiers and how they relate to well-known D-Bus
+	names and .desktop files.
+
+	[0] https://standards.freedesktop.org/desktop-entry-spec/
+      </description>
+      <arg name="app_id" type="string"/>
+    </request>
+
+    <request name="show_window_menu">
+      <description summary="show the window menu">
+	Clients implementing client-side decorations might want to show
+	a context menu when right-clicking on the decorations, giving the
+	user a menu that they can use to maximize or minimize the window.
+
+	This request asks the compositor to pop up such a window menu at
+	the given position, relative to the local surface coordinates of
+	the parent surface. There are no guarantees as to what menu items
+	the window menu contains, or even if a window menu will be drawn
+	at all.
+
+	This request must be used in response to some sort of user action
+	like a button press, key press, or touch down event.
+      </description>
+      <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
+      <arg name="serial" type="uint" summary="the serial of the user event"/>
+      <arg name="x" type="int" summary="the x position to pop up the window menu at"/>
+      <arg name="y" type="int" summary="the y position to pop up the window menu at"/>
+    </request>
+
+    <request name="move">
+      <description summary="start an interactive move">
+	Start an interactive, user-driven move of the surface.
+
+	This request must be used in response to some sort of user action
+	like a button press, key press, or touch down event. The passed
+	serial is used to determine the type of interactive move (touch,
+	pointer, etc).
+
+	The server may ignore move requests depending on the state of
+	the surface (e.g. fullscreen or maximized), or if the passed serial
+	is no longer valid.
+
+	If triggered, the surface will lose the focus of the device
+	(wl_pointer, wl_touch, etc) used for the move. It is up to the
+	compositor to visually indicate that the move is taking place, such as
+	updating a pointer cursor, during the move. There is no guarantee
+	that the device focus will return when the move is completed.
+      </description>
+      <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
+      <arg name="serial" type="uint" summary="the serial of the user event"/>
+    </request>
+
+    <enum name="resize_edge">
+      <description summary="edge values for resizing">
+	These values are used to indicate which edge of a surface
+	is being dragged in a resize operation.
+      </description>
+      <entry name="none" value="0"/>
+      <entry name="top" value="1"/>
+      <entry name="bottom" value="2"/>
+      <entry name="left" value="4"/>
+      <entry name="top_left" value="5"/>
+      <entry name="bottom_left" value="6"/>
+      <entry name="right" value="8"/>
+      <entry name="top_right" value="9"/>
+      <entry name="bottom_right" value="10"/>
+    </enum>
+
+    <request name="resize">
+      <description summary="start an interactive resize">
+	Start a user-driven, interactive resize of the surface.
+
+	This request must be used in response to some sort of user action
+	like a button press, key press, or touch down event. The passed
+	serial is used to determine the type of interactive resize (touch,
+	pointer, etc).
+
+	The server may ignore resize requests depending on the state of
+	the surface (e.g. fullscreen or maximized).
+
+	If triggered, the client will receive configure events with the
+	"resize" state enum value and the expected sizes. See the "resize"
+	enum value for more details about what is required. The client
+	must also acknowledge configure events using "ack_configure". After
+	the resize is completed, the client will receive another "configure"
+	event without the resize state.
+
+	If triggered, the surface also will lose the focus of the device
+	(wl_pointer, wl_touch, etc) used for the resize. It is up to the
+	compositor to visually indicate that the resize is taking place,
+	such as updating a pointer cursor, during the resize. There is no
+	guarantee that the device focus will return when the resize is
+	completed.
+
+	The edges parameter specifies how the surface should be resized, and
+	is one of the values of the resize_edge enum. Values not matching
+	a variant of the enum will cause the invalid_resize_edge protocol error.
+	The compositor may use this information to update the surface position
+	for example when dragging the top left corner. The compositor may also
+	use this information to adapt its behavior, e.g. choose an appropriate
+	cursor image.
+      </description>
+      <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
+      <arg name="serial" type="uint" summary="the serial of the user event"/>
+      <arg name="edges" type="uint" enum="resize_edge" summary="which edge or corner is being dragged"/>
+    </request>
+
+    <enum name="state">
+      <description summary="types of state on the surface">
+	The different state values used on the surface. This is designed for
+	state values like maximized, fullscreen. It is paired with the
+	configure event to ensure that both the client and the compositor
+	setting the state can be synchronized.
+
+	States set in this way are double-buffered, see wl_surface.commit.
+      </description>
+      <entry name="maximized" value="1" summary="the surface is maximized">
+	<description summary="the surface is maximized">
+	  The surface is maximized. The window geometry specified in the configure
+	  event must be obeyed by the client, or the xdg_wm_base.invalid_surface_state
+	  error is raised.
+
+	  The client should draw without shadow or other
+	  decoration outside of the window geometry.
+	</description>
+      </entry>
+      <entry name="fullscreen" value="2" summary="the surface is fullscreen">
+	<description summary="the surface is fullscreen">
+	  The surface is fullscreen. The window geometry specified in the
+	  configure event is a maximum; the client cannot resize beyond it. For
+	  a surface to cover the whole fullscreened area, the geometry
+	  dimensions must be obeyed by the client. For more details, see
+	  xdg_toplevel.set_fullscreen.
+	</description>
+      </entry>
+      <entry name="resizing" value="3" summary="the surface is being resized">
+	<description summary="the surface is being resized">
+	  The surface is being resized. The window geometry specified in the
+	  configure event is a maximum; the client cannot resize beyond it.
+	  Clients that have aspect ratio or cell sizing configuration can use
+	  a smaller size, however.
+	</description>
+      </entry>
+      <entry name="activated" value="4" summary="the surface is now activated">
+	<description summary="the surface is now activated">
+	  Client window decorations should be painted as if the window is
+	  active. Do not assume this means that the window actually has
+	  keyboard or pointer focus.
+	</description>
+      </entry>
+      <entry name="tiled_left" value="5" since="2">
+	<description summary="the surface’s left edge is tiled">
+	  The window is currently in a tiled layout and the left edge is
+	  considered to be adjacent to another part of the tiling grid.
+
+	  The client should draw without shadow or other decoration outside of
+	  the window geometry on the left edge.
+	</description>
+      </entry>
+      <entry name="tiled_right" value="6" since="2">
+	<description summary="the surface’s right edge is tiled">
+	  The window is currently in a tiled layout and the right edge is
+	  considered to be adjacent to another part of the tiling grid.
+
+	  The client should draw without shadow or other decoration outside of
+	  the window geometry on the right edge.
+	</description>
+      </entry>
+      <entry name="tiled_top" value="7" since="2">
+	<description summary="the surface’s top edge is tiled">
+	  The window is currently in a tiled layout and the top edge is
+	  considered to be adjacent to another part of the tiling grid.
+
+	  The client should draw without shadow or other decoration outside of
+	  the window geometry on the top edge.
+	</description>
+      </entry>
+      <entry name="tiled_bottom" value="8" since="2">
+	<description summary="the surface’s bottom edge is tiled">
+	  The window is currently in a tiled layout and the bottom edge is
+	  considered to be adjacent to another part of the tiling grid.
+
+	  The client should draw without shadow or other decoration outside of
+	  the window geometry on the bottom edge.
+	</description>
+      </entry>
+      <entry name="suspended" value="9" since="6">
+        <description summary="surface repaint is suspended">
+	  The surface is currently not ordinarily being repainted; for
+	  example because its content is occluded by another window, or its
+	  outputs are switched off due to screen locking.
+	</description>
+      </entry>
+      <entry name="constrained_left" value="10" since="7">
+	<description summary="the surface’s left edge is constrained">
+          The left edge of the window is currently constrained, meaning it
+          shouldn't attempt to resize from that edge. It can for example mean
+          it's tiled next to a monitor edge on the constrained side of the
+          window.
+	</description>
+      </entry>
+      <entry name="constrained_right" value="11" since="7">
+	<description summary="the surface’s right edge is constrained">
+          The right edge of the window is currently constrained, meaning it
+          shouldn't attempt to resize from that edge. It can for example mean
+          it's tiled next to a monitor edge on the constrained side of the
+          window.
+	</description>
+      </entry>
+      <entry name="constrained_top" value="12" since="7">
+	<description summary="the surface’s top edge is constrained">
+          The top edge of the window is currently constrained, meaning it
+          shouldn't attempt to resize from that edge. It can for example mean
+          it's tiled next to a monitor edge on the constrained side of the
+          window.
+	</description>
+      </entry>
+      <entry name="constrained_bottom" value="13" since="7">
+	<description summary="the surface’s bottom edge is tiled">
+          The bottom edge of the window is currently constrained, meaning it
+          shouldn't attempt to resize from that edge. It can for example mean
+          it's tiled next to a monitor edge on the constrained side of the
+          window.
+	</description>
+      </entry>
+    </enum>
+
+    <request name="set_max_size">
+      <description summary="set the maximum size">
+	Set a maximum size for the window.
+
+	The client can specify a maximum size so that the compositor does
+	not try to configure the window beyond this size.
+
+	The width and height arguments are in window geometry coordinates.
+	See xdg_surface.set_window_geometry.
+
+	Values set in this way are double-buffered, see wl_surface.commit.
+
+	The compositor can use this information to allow or disallow
+	different states like maximize or fullscreen and draw accurate
+	animations.
+
+	Similarly, a tiling window manager may use this information to
+	place and resize client windows in a more effective way.
+
+	The client should not rely on the compositor to obey the maximum
+	size. The compositor may decide to ignore the values set by the
+	client and request a larger size.
+
+	If never set, or a value of zero in the request, means that the
+	client has no expected maximum size in the given dimension.
+	As a result, a client wishing to reset the maximum size
+	to an unspecified state can use zero for width and height in the
+	request.
+
+	Requesting a maximum size to be smaller than the minimum size of
+	a surface is illegal and will result in an invalid_size error.
+
+	The width and height must be greater than or equal to zero. Using
+	strictly negative values for width or height will result in a
+	invalid_size error.
+      </description>
+      <arg name="width" type="int"/>
+      <arg name="height" type="int"/>
+    </request>
+
+    <request name="set_min_size">
+      <description summary="set the minimum size">
+	Set a minimum size for the window.
+
+	The client can specify a minimum size so that the compositor does
+	not try to configure the window below this size.
+
+	The width and height arguments are in window geometry coordinates.
+	See xdg_surface.set_window_geometry.
+
+	Values set in this way are double-buffered, see wl_surface.commit.
+
+	The compositor can use this information to allow or disallow
+	different states like maximize or fullscreen and draw accurate
+	animations.
+
+	Similarly, a tiling window manager may use this information to
+	place and resize client windows in a more effective way.
+
+	The client should not rely on the compositor to obey the minimum
+	size. The compositor may decide to ignore the values set by the
+	client and request a smaller size.
+
+	If never set, or a value of zero in the request, means that the
+	client has no expected minimum size in the given dimension.
+	As a result, a client wishing to reset the minimum size
+	to an unspecified state can use zero for width and height in the
+	request.
+
+	Requesting a minimum size to be larger than the maximum size of
+	a surface is illegal and will result in an invalid_size error.
+
+	The width and height must be greater than or equal to zero. Using
+	strictly negative values for width and height will result in a
+	invalid_size error.
+      </description>
+      <arg name="width" type="int"/>
+      <arg name="height" type="int"/>
+    </request>
+
+    <request name="set_maximized">
+      <description summary="maximize the window">
+	Maximize the surface.
+
+	After requesting that the surface should be maximized, the compositor
+	will respond by emitting a configure event. Whether this configure
+	actually sets the window maximized is subject to compositor policies.
+	The client must then update its content, drawing in the configured
+	state. The client must also acknowledge the configure when committing
+	the new content (see ack_configure).
+
+	It is up to the compositor to decide how and where to maximize the
+	surface, for example which output and what region of the screen should
+	be used.
+
+	If the surface was already maximized, the compositor will still emit
+	a configure event with the "maximized" state.
+
+	If the surface is in a fullscreen state, this request has no direct
+	effect. It may alter the state the surface is returned to when
+	unmaximized unless overridden by the compositor.
+      </description>
+    </request>
+
+    <request name="unset_maximized">
+      <description summary="unmaximize the window">
+	Unmaximize the surface.
+
+	After requesting that the surface should be unmaximized, the compositor
+	will respond by emitting a configure event. Whether this actually
+	un-maximizes the window is subject to compositor policies.
+	If available and applicable, the compositor will include the window
+	geometry dimensions the window had prior to being maximized in the
+	configure event. The client must then update its content, drawing it in
+	the configured state. The client must also acknowledge the configure
+	when committing the new content (see ack_configure).
+
+	It is up to the compositor to position the surface after it was
+	unmaximized; usually the position the surface had before maximizing, if
+	applicable.
+
+	If the surface was already not maximized, the compositor will still
+	emit a configure event without the "maximized" state.
+
+	If the surface is in a fullscreen state, this request has no direct
+	effect. It may alter the state the surface is returned to when
+	unmaximized unless overridden by the compositor.
+      </description>
+    </request>
+
+    <request name="set_fullscreen">
+      <description summary="set the window as fullscreen on an output">
+	Make the surface fullscreen.
+
+	After requesting that the surface should be fullscreened, the
+	compositor will respond by emitting a configure event. Whether the
+	client is actually put into a fullscreen state is subject to compositor
+	policies. The client must also acknowledge the configure when
+	committing the new content (see ack_configure).
+
+	The output passed by the request indicates the client's preference as
+	to which display it should be set fullscreen on. If this value is NULL,
+	it's up to the compositor to choose which display will be used to map
+	this surface.
+
+	If the surface doesn't cover the whole output, the compositor will
+	position the surface in the center of the output and compensate with
+	with border fill covering the rest of the output. The content of the
+	border fill is undefined, but should be assumed to be in some way that
+	attempts to blend into the surrounding area (e.g. solid black).
+
+	If the fullscreened surface is not opaque, the compositor must make
+	sure that other screen content not part of the same surface tree (made
+	up of subsurfaces, popups or similarly coupled surfaces) are not
+	visible below the fullscreened surface.
+      </description>
+      <arg name="output" type="object" interface="wl_output" allow-null="true"/>
+    </request>
+
+    <request name="unset_fullscreen">
+      <description summary="unset the window as fullscreen">
+	Make the surface no longer fullscreen.
+
+	After requesting that the surface should be unfullscreened, the
+	compositor will respond by emitting a configure event.
+	Whether this actually removes the fullscreen state of the client is
+	subject to compositor policies.
+
+	Making a surface unfullscreen sets states for the surface based on the following:
+	* the state(s) it may have had before becoming fullscreen
+	* any state(s) decided by the compositor
+	* any state(s) requested by the client while the surface was fullscreen
+
+	The compositor may include the previous window geometry dimensions in
+	the configure event, if applicable.
+
+	The client must also acknowledge the configure when committing the new
+	content (see ack_configure).
+      </description>
+    </request>
+
+    <request name="set_minimized">
+      <description summary="set the window as minimized">
+	Request that the compositor minimize your surface. There is no
+	way to know if the surface is currently minimized, nor is there
+	any way to unset minimization on this surface.
+
+	If you are looking to throttle redrawing when minimized, please
+	instead use the wl_surface.frame event for this, as this will
+	also work with live previews on windows in Alt-Tab, Expose or
+	similar compositor features.
+      </description>
+    </request>
+
+    <event name="configure">
+      <description summary="suggest a surface change">
+	This configure event asks the client to resize its toplevel surface or
+	to change its state. The configured state should not be applied
+	immediately. See xdg_surface.configure for details.
+
+	The width and height arguments specify a hint to the window
+	about how its surface should be resized in window geometry
+	coordinates. See set_window_geometry.
+
+	If the width or height arguments are zero, it means the client
+	should decide its own window dimension. This may happen when the
+	compositor needs to configure the state of the surface but doesn't
+	have any information about any previous or expected dimension.
+
+	The states listed in the event specify how the width/height
+	arguments should be interpreted, and possibly how it should be
+	drawn.
+
+	Clients must send an ack_configure in response to this event. See
+	xdg_surface.configure and xdg_surface.ack_configure for details.
+      </description>
+      <arg name="width" type="int"/>
+      <arg name="height" type="int"/>
+      <arg name="states" type="array"/>
+    </event>
+
+    <event name="close">
+      <description summary="surface wants to be closed">
+	The close event is sent by the compositor when the user
+	wants the surface to be closed. This should be equivalent to
+	the user clicking the close button in client-side decorations,
+	if your application has any.
+
+	This is only a request that the user intends to close the
+	window. The client may choose to ignore this request, or show
+	a dialog to ask the user to save their data, etc.
+      </description>
+    </event>
+
+    <!-- Version 4 additions -->
+
+    <event name="configure_bounds" since="4">
+      <description summary="recommended window geometry bounds">
+	The configure_bounds event may be sent prior to a xdg_toplevel.configure
+	event to communicate the bounds a window geometry size is recommended
+	to constrain to.
+
+	The passed width and height are in surface coordinate space. If width
+	and height are 0, it means bounds is unknown and equivalent to as if no
+	configure_bounds event was ever sent for this surface.
+
+	The bounds can for example correspond to the size of a monitor excluding
+	any panels or other shell components, so that a surface isn't created in
+	a way that it cannot fit.
+
+	The bounds may change at any point, and in such a case, a new
+	xdg_toplevel.configure_bounds will be sent, followed by
+	xdg_toplevel.configure and xdg_surface.configure.
+      </description>
+      <arg name="width" type="int"/>
+      <arg name="height" type="int"/>
+    </event>
+
+    <!-- Version 5 additions -->
+
+    <enum name="wm_capabilities" since="5">
+      <entry name="window_menu" value="1" summary="show_window_menu is available"/>
+      <entry name="maximize" value="2" summary="set_maximized and unset_maximized are available"/>
+      <entry name="fullscreen" value="3" summary="set_fullscreen and unset_fullscreen are available"/>
+      <entry name="minimize" value="4" summary="set_minimized is available"/>
+    </enum>
+
+    <event name="wm_capabilities" since="5">
+      <description summary="compositor capabilities">
+	This event advertises the capabilities supported by the compositor. If
+	a capability isn't supported, clients should hide or disable the UI
+	elements that expose this functionality. For instance, if the
+	compositor doesn't advertise support for minimized toplevels, a button
+	triggering the set_minimized request should not be displayed.
+
+	The compositor will ignore requests it doesn't support. For instance,
+	a compositor which doesn't advertise support for minimized will ignore
+	set_minimized requests.
+
+	Compositors must send this event once before the first
+	xdg_surface.configure event. When the capabilities change, compositors
+	must send this event again and then send an xdg_surface.configure
+	event.
+
+	The configured state should not be applied immediately. See
+	xdg_surface.configure for details.
+
+	The capabilities are sent as an array of 32-bit unsigned integers in
+	native endianness.
+      </description>
+      <arg name="capabilities" type="array" summary="array of 32-bit capabilities"/>
+    </event>
+  </interface>
+
+  <interface name="xdg_popup" version="7">
+    <description summary="short-lived, popup surfaces for menus">
+      A popup surface is a short-lived, temporary surface. It can be used to
+      implement for example menus, popovers, tooltips and other similar user
+      interface concepts.
+
+      A popup can be made to take an explicit grab. See xdg_popup.grab for
+      details.
+
+      When the popup is dismissed, a popup_done event will be sent out, and at
+      the same time the surface will be unmapped. See the xdg_popup.popup_done
+      event for details.
+
+      Explicitly destroying the xdg_popup object will also dismiss the popup and
+      unmap the surface. Clients that want to dismiss the popup when another
+      surface of their own is clicked should dismiss the popup using the destroy
+      request.
+
+      A newly created xdg_popup will be stacked on top of all previously created
+      xdg_popup surfaces associated with the same xdg_toplevel.
+
+      The parent of an xdg_popup must be mapped (see the xdg_surface
+      description) before the xdg_popup itself.
+
+      The client must call wl_surface.commit on the corresponding wl_surface
+      for the xdg_popup state to take effect.
+    </description>
+
+    <enum name="error">
+      <entry name="invalid_grab" value="0"
+	     summary="tried to grab after being mapped"/>
+    </enum>
+
+    <request name="destroy" type="destructor">
+      <description summary="remove xdg_popup interface">
+	This destroys the popup. Explicitly destroying the xdg_popup
+	object will also dismiss the popup, and unmap the surface.
+
+	If this xdg_popup is not the "topmost" popup, the
+	xdg_wm_base.not_the_topmost_popup protocol error will be sent.
+      </description>
+    </request>
+
+    <request name="grab">
+      <description summary="make the popup take an explicit grab">
+	This request makes the created popup take an explicit grab. An explicit
+	grab will be dismissed when the user dismisses the popup, or when the
+	client destroys the xdg_popup. This can be done by the user clicking
+	outside the surface, using the keyboard, or even locking the screen
+	through closing the lid or a timeout.
+
+	If the compositor denies the grab, the popup will be immediately
+	dismissed.
+
+	This request must be used in response to some sort of user action like a
+	button press, key press, or touch down event. The serial number of the
+	event should be passed as 'serial'.
+
+	The parent of a grabbing popup must either be an xdg_toplevel surface or
+	another xdg_popup with an explicit grab. If the parent is another
+	xdg_popup it means that the popups are nested, with this popup now being
+	the topmost popup.
+
+	Nested popups must be destroyed in the reverse order they were created
+	in, e.g. the only popup you are allowed to destroy at all times is the
+	topmost one.
+
+	When compositors choose to dismiss a popup, they may dismiss every
+	nested grabbing popup as well. When a compositor dismisses popups, it
+	will follow the same dismissing order as required from the client.
+
+	If the topmost grabbing popup is destroyed, the grab will be returned to
+	the parent of the popup, if that parent previously had an explicit grab.
+
+	If the parent is a grabbing popup which has already been dismissed, this
+	popup will be immediately dismissed. If the parent is a popup that did
+	not take an explicit grab, an error will be raised.
+
+	During a popup grab, the client owning the grab will receive pointer
+	and touch events for all their surfaces as normal (similar to an
+	"owner-events" grab in X11 parlance), while the top most grabbing popup
+	will always have keyboard focus.
+      </description>
+      <arg name="seat" type="object" interface="wl_seat"
+	   summary="the wl_seat of the user event"/>
+      <arg name="serial" type="uint" summary="the serial of the user event"/>
+    </request>
+
+    <event name="configure">
+      <description summary="configure the popup surface">
+	This event asks the popup surface to configure itself given the
+	configuration. The configured state should not be applied immediately.
+	See xdg_surface.configure for details.
+
+	The x and y arguments represent the position the popup was placed at
+	given the xdg_positioner rule, relative to the upper left corner of the
+	window geometry of the parent surface.
+
+	For version 2 or older, the configure event for an xdg_popup is only
+	ever sent once for the initial configuration. Starting with version 3,
+	it may be sent again if the popup is setup with an xdg_positioner with
+	set_reactive requested, or in response to xdg_popup.reposition requests.
+      </description>
+      <arg name="x" type="int"
+	   summary="x position relative to parent surface window geometry"/>
+      <arg name="y" type="int"
+	   summary="y position relative to parent surface window geometry"/>
+      <arg name="width" type="int" summary="window geometry width"/>
+      <arg name="height" type="int" summary="window geometry height"/>
+    </event>
+
+    <event name="popup_done">
+      <description summary="popup interaction is done">
+	The popup_done event is sent out when a popup is dismissed by the
+	compositor. The client should destroy the xdg_popup object at this
+	point.
+      </description>
+    </event>
+
+    <!-- Version 3 additions -->
+
+    <request name="reposition" since="3">
+      <description summary="recalculate the popup's location">
+	Reposition an already-mapped popup. The popup will be placed given the
+	details in the passed xdg_positioner object, and a
+	xdg_popup.repositioned followed by xdg_popup.configure and
+	xdg_surface.configure will be emitted in response. Any parameters set
+	by the previous positioner will be discarded.
+
+	The passed token will be sent in the corresponding
+	xdg_popup.repositioned event. The new popup position will not take
+	effect until the corresponding configure event is acknowledged by the
+	client. See xdg_popup.repositioned for details. The token itself is
+	opaque, and has no other special meaning.
+
+	If multiple reposition requests are sent, the compositor may skip all
+	but the last one.
+
+	If the popup is repositioned in response to a configure event for its
+	parent, the client should send an xdg_positioner.set_parent_configure
+	and possibly an xdg_positioner.set_parent_size request to allow the
+	compositor to properly constrain the popup.
+
+	If the popup is repositioned together with a parent that is being
+	resized, but not in response to a configure event, the client should
+	send an xdg_positioner.set_parent_size request.
+      </description>
+      <arg name="positioner" type="object" interface="xdg_positioner"/>
+      <arg name="token" type="uint" summary="reposition request token"/>
+    </request>
+
+    <event name="repositioned" since="3">
+      <description summary="signal the completion of a repositioned request">
+	The repositioned event is sent as part of a popup configuration
+	sequence, together with xdg_popup.configure and lastly
+	xdg_surface.configure to notify the completion of a reposition request.
+
+	The repositioned event is to notify about the completion of a
+	xdg_popup.reposition request. The token argument is the token passed
+	in the xdg_popup.reposition request.
+
+	Immediately after this event is emitted, xdg_popup.configure and
+	xdg_surface.configure will be sent with the updated size and position,
+	as well as a new configure serial.
+
+	The client should optionally update the content of the popup, but must
+	acknowledge the new popup configuration for the new position to take
+	effect. See xdg_surface.ack_configure for details.
+      </description>
+      <arg name="token" type="uint" summary="reposition request token"/>
+    </event>
+
+  </interface>
+</protocol>