diff --git a/runtime/doc/cmdline.txt b/runtime/doc/cmdline.txt
index 39893d7..12cebb2 100644
--- a/runtime/doc/cmdline.txt
+++ b/runtime/doc/cmdline.txt
@@ -1,4 +1,4 @@
-*cmdline.txt*   For Vim version 7.3.  Last change: 2011 Feb 10
+*cmdline.txt*   For Vim version 7.3.  Last change: 2011 Mar 27
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -83,9 +83,9 @@
 CTRL-Q		Same as CTRL-V.  But with some terminals it is used for
 		control flow, it doesn't work then.
 
-							*c_<Left>*
+							*c_<Left>* *c_Left*
 <Left>		cursor left
-							*c_<Right>*
+							*c_<Right>* *c_Right*
 <Right>		cursor right
 							*c_<S-Left>*
 <S-Left> or <C-Left>					*c_<C-Left>*
@@ -93,18 +93,18 @@
 							*c_<S-Right>*
 <S-Right> or <C-Right>					*c_<C-Right>*
 		cursor one WORD right
-CTRL-B or <Home>					*c_CTRL-B* *c_<Home>*
+CTRL-B or <Home>				*c_CTRL-B* *c_<Home>* *c_Home*
 		cursor to beginning of command-line
-CTRL-E or <End>						*c_CTRL-E* *c_<End>*
+CTRL-E or <End>					*c_CTRL-E* *c_<End>* *c_End*
 		cursor to end of command-line
 
 							*c_<LeftMouse>*
 <LeftMouse>	Move the cursor to the position of the mouse click.
 
-CTRL-H							*c_<BS>* *c_CTRL-H*
+CTRL-H						*c_<BS>* *c_CTRL-H* *c_BS*
 <BS>		Delete the character in front of the cursor (see |:fixdel| if
 		your <BS> key does not do what you want).
-							*c_<Del>*
+							*c_<Del>* *c_Del*
 <Del>		Delete the character under the cursor (at end of line:
 		character before the cursor) (see |:fixdel| if your <Del>
 		key does not do what you want).
@@ -118,7 +118,7 @@
 		preferred behavior, add the following to your .vimrc: >
 			:cnoremap <C-U> <C-E><C-U>
 <
-							*c_<Insert>*
+						*c_<Insert>* *c_Insert*
 <Insert>	Toggle between insert and overstrike.  {not in Vi}
 
 {char1} <BS> {char2}	or				*c_digraph*
@@ -224,9 +224,9 @@
 		the clipboard. |modeless-selection|
 		If there is no selection CTRL-Y is inserted as a character.
 
-CTRL-J						*c_CTRL-J* *c_<NL>* *c_<CR>*
+CTRL-J					*c_CTRL-J* *c_<NL>* *c_<CR>* *c_CR*
 <CR> or <NL>	start entered command
-							*c_<Esc>*
+							*c_<Esc>* *c_Esc*
 <Esc>		When typed and 'x' not present in 'cpoptions', quit
 		Command-line mode without executing.  In macros or when 'x'
 		present in 'cpoptions', start entered command.
@@ -235,12 +235,12 @@
 							*c_CTRL-C*
 CTRL-C		quit command-line without executing
 
-							*c_<Up>*
+							*c_<Up>* *c_Up*
 <Up>		recall older command-line from history, whose beginning
 		matches the current command-line (see below).
 		{not available when compiled without the |+cmdline_hist|
 		feature}
-							*c_<Down>*
+							*c_<Down>* *c_Down*
 <Down>		recall more recent command-line from history, whose beginning
 		matches the current command-line (see below).
 		{not available when compiled without the |+cmdline_hist|
@@ -865,7 +865,7 @@
 		After this, the previous modifiers can be used again.  For
 		example ":p", to make a full path after the substitution.
 	:gs?pat?sub?
-		Substitute all occurrences of "path" with "sub".  Otherwise
+		Substitute all occurrences of "pat" with "sub".  Otherwise
 		this works like ":s".
 
 Examples, when the file name is "src/version.c", current dir
diff --git a/runtime/doc/pi_netrw.txt b/runtime/doc/pi_netrw.txt
index 8e1730b..ae4a870 100644
--- a/runtime/doc/pi_netrw.txt
+++ b/runtime/doc/pi_netrw.txt
@@ -1,4 +1,4 @@
-*pi_netrw.txt*  For Vim version 7.3.  Last change: 2010 Jul 28
+*pi_netrw.txt*  For Vim version 7.3.  Last change: 2011 Apr 01
 
 	    -----------------------------------------------------
 	    NETRW REFERENCE MANUAL    by Charles E. Campbell, Jr.
@@ -6,7 +6,7 @@
 Author:  Charles E. Campbell, Jr.  <NdrOchip@ScampbellPfamily.AbizM>
 	  (remove NOSPAM from Campbell's email first)
 
-Copyright: Copyright (C) 1999-2010 Charles E Campbell, Jr    *netrw-copyright*
+Copyright: Copyright (C) 1999-2011 Charles E Campbell, Jr    *netrw-copyright*
 	   Permission is hereby granted to use and distribute this code, with
 	   or without modifications, provided that this copyright notice is
 	   copied with it. Like anything else that's free, netrw.vim,
@@ -41,7 +41,7 @@
       NETRC..............................................|netrw-netrc|
       PASSWORD...........................................|netrw-passwd|
 5.  Activation...........................................|netrw-activate|
-6.  Transparent File Editing.............................|netrw-transparent|
+6.  Transparent Remote File Editing......................|netrw-transparent|
 7.  Ex Commands..........................................|netrw-ex|
 8.  Variables and Options................................|netrw-var|
 9.  Browsing.............................................|netrw-browse|
@@ -65,6 +65,7 @@
       Displaying Information About File..................|netrw-qf|
       Edit File Or Directory Hiding List.................|netrw-ctrl-h|
       Editing The Sorting Sequence.......................|netrw-S|
+      Forcing treatment as a file or directory...........|netrw-gd| |netrw-gf|
       Going Up...........................................|netrw--|
       Hiding Files Or Directories........................|netrw-a|
       Improving Browsing.................................|netrw-ssh-hack|
@@ -180,19 +181,19 @@
 
 	Protocol  Variable	    Default Value
 	--------  ----------------  -------------
-	   dav:  *g:netrw_dav_cmd*   = "cadaver"     if cadaver is executable
-	   dav:   g:netrw_dav_cmd    = "curl -o"     elseif curl is available
-	 fetch:  *g:netrw_fetch_cmd* = "fetch -o"    if fetch is available
-	   ftp:  *g:netrw_ftp_cmd*   = "ftp"
-	  http:  *g:netrw_http_cmd*  = "elinks"     if   elinks  is available
+	   dav:   *g:netrw_dav_cmd*    = "cadaver"    if cadaver is executable
+	   dav:   g:netrw_dav_cmd    = "curl -o"    elseif curl is available
+	 fetch:   *g:netrw_fetch_cmd*  = "fetch -o"   if fetch is available
+	   ftp:   *g:netrw_ftp_cmd*    = "ftp"
+	  http:   *g:netrw_http_cmd*   = "elinks"     if   elinks  is available
 	  http:   g:netrw_http_cmd   = "links"      elseif links is available
 	  http:   g:netrw_http_cmd   = "curl"       elseif curl  is available
 	  http:   g:netrw_http_cmd   = "wget"       elseif wget  is available
           http:   g:netrw_http_cmd   = "fetch"      elseif fetch is available
-	   rcp:  *g:netrw_rcp_cmd*   = "rcp"
-	 rsync:  *g:netrw_rsync_cmd* = "rsync -a"
-	   scp:  *g:netrw_scp_cmd*   = "scp -q"
-	  sftp:  *g:netrw_sftp_cmd*  = "sftp"
+	   rcp:   *g:netrw_rcp_cmd*    = "rcp"
+	 rsync:   *g:netrw_rsync_cmd*  = "rsync -a"
+	   scp:   *g:netrw_scp_cmd*    = "scp -q"
+	  sftp:   *g:netrw_sftp_cmd*   = "sftp"
 
 	*g:netrw_http_xcmd* : the option string for http://... protocols are
 	specified via this variable and may be independently overridden.  By
@@ -500,7 +501,23 @@
 >
 	vim ftp://[user@]machine[[:#]portnumber]/path
 <
-However, ftp will often need to query the user for the userid and password.
+Windows provides an ftp (typically c:\Windows\System32\ftp.exe) which uses
+an option, -s:filename (filename can and probably should be a full path)
+which contains ftp commands which will be automatically run whenever ftp
+starts.  You may use this feature to enter a user and password for one site: >
+	userid
+	password
+If |g:netrw_ftp_cmd| contains -s:[path/]MACHINE, then (on Windows machines only)
+netrw will substitute the current machine name requested for ftp connection
+for MACHINE.  Hence one can have multiple machine.ftp files containing login
+and password for ftp.  Example: >
+
+	g:netrw_ftp_cmd= 'c:\Windows\System32\ftp -s:C:\Users\Myself\MACHINE'
+	vim ftp://myhost.somewhere.net/
+will use a file >
+	C:\Users\Myself\myhost.ftp
+<
+Often, ftp will need to query the user for the userid and password.
 The latter will be done "silently"; ie. asterisks will show up instead of
 the actually-typed-in password.  Netrw will retain the userid and password
 for subsequent read/writes from the most recent transfer so subsequent
@@ -624,7 +641,7 @@
 <
 
 ==============================================================================
-6. Transparent File Editing			*netrw-transparent* {{{1
+6. Transparent Remote File Editing			*netrw-transparent* {{{1
 
 Transparent file transfers occur whenever a regular file read or write
 (invoked via an |:autocmd| for |BufReadCmd|, |BufWriteCmd|, or |SourceCmd|
@@ -1225,7 +1242,7 @@
 
 Every time you change to a new directory (new for the current session),
 netrw will save the directory in a recently-visited directory history
-list (unless g:netrw_dirhistmax is zero; by default, it's ten).  With the
+list (unless |g:netrw_dirhistmax| is zero; by default, it's ten).  With the
 "u" map, one can change to an earlier directory (predecessor).  To do
 the opposite, see |netrw-U|.
 
@@ -1527,6 +1544,19 @@
 Associated setting variables: |g:netrw_sort_sequence| |g:netrw_sort_options|
 
 
+FORCING TREATMENT AS A FILE OR DIRECTORY	*netrw-gd* *netrw-gf* {{{2
+
+Remote symbolic links (ie. those listed via ssh or ftp) are problematic
+in that it is difficult to tell whether they link to a file or to a
+directory.
+
+To force treatment as a file: use >
+	gd
+<
+To force treatment as a directory: use >
+	gf
+<
+
 GOING UP							*netrw--* {{{2
 
 To go up a directory, press "-" or press the <cr> when atop the ../ directory
@@ -1740,6 +1770,16 @@
 with <s-leftmouse> using gvim.  One may unmark all files by pressing
 "mu" (see |netrw-mu|).
 
+Marked files are highlighted using the "netrwMarkFile" highlighting group,
+which by default is linked to "Identifier" (see Identifier under
+|group-name|).  You may change the highlighting group by putting something
+like >
+
+	highlight clear netrwMarkFile
+	hi link netrwMarkFile ..whatever..
+<
+into $HOME/.vim/after/syntax/netrw.vim .
+
 *markfilelist* *global_markfilelist* *local_markfilelist*
 All marked files are entered onto the global marked file list; there is only
 one such list.  In addition, every netrw buffer also has its own local marked
@@ -1789,7 +1829,8 @@
 		      (Uses the global marked file list)
 
 Select a target directory with mt (|netrw-mt|).  Then change directory,
-select file(s) (see |netrw-mf|), and press "mc".
+select file(s) (see |netrw-mf|), and press "mc".  The copy is done
+from the current window (where one does the mf) to the target.
 
 Associated setting variable: |g:netrw_localcopycmd| |g:netrw_ssh_cmd|
 
@@ -1841,7 +1882,8 @@
 	Use at your own risk!
 
 Select a target directory with mt (|netrw-mt|).  Then change directory,
-select file(s) (see |netrw-mf|), and press "mm".
+select file(s) (see |netrw-mf|), and press "mm".  The move is done
+from the current window (where one does the mf) to the target.
 
 Associated setting variable: |g:netrw_localmovecmd| |g:netrw_ssh_cmd|
 
@@ -1922,21 +1964,21 @@
    ---				-----------
    Var				Explanation
    ---				-----------
-< *g:netrw_alto*		change from above splitting to below splitting
+< *g:netrw_alto*		  change from above splitting to below splitting
 				by setting this variable (see |netrw-o|)
 				 default: =&sb           (see |'sb'|)
 
-  *g:netrw_altv*		change from left splitting to right splitting
+  *g:netrw_altv*		  change from left splitting to right splitting
 				by setting this variable (see |netrw-v|)
 				 default: =&spr          (see |'spr'|)
 
-  *g:netrw_banner*		enable/suppress the banner
+  *g:netrw_banner*		  enable/suppress the banner
 				=0: suppress the banner
 				=1: banner is enabled (default)
 				NOTE: suppressing the banner is a new feature
 				which may cause problems.
 
-  *g:netrw_browse_split*	when browsing, <cr> will open the file by:
+  *g:netrw_browse_split*	  when browsing, <cr> will open the file by:
 				=0: re-using the same window
 				=1: horizontally splitting the window first
 				=2: vertically   splitting the window first
@@ -1946,7 +1988,7 @@
 				    to get vertical splitting instead of
 				    horizontal splitting.
 
-  *g:netrw_browsex_viewer*	specify user's preference for a viewer: >
+  *g:netrw_browsex_viewer*	  specify user's preference for a viewer: >
 					"kfmclient exec"
 					"gnome-open"
 <				If >
@@ -1955,35 +1997,48 @@
 				a script/function to handle the given
 				extension.  (see |netrw_filehandler|).
 
-  *g:netrw_chgperm*		Unix/Linux: "chmod PERM FILENAME"
+  *g:netrw_chgperm*		  Unix/Linux: "chmod PERM FILENAME"
 				Windows:    "cacls FILENAME /e /p PERM"
 				Used to change access permission for a file.
 
-  *g:netrw_compress*		="gzip"
+  *g:netrw_compress*		  ="gzip"
 				    Will compress marked files with this
 				    command
 
-  *g:netrw_ctags*		="ctags"
+  *g:netrw_ctags*		  ="ctags"
 				The default external program used to create tags
 
-  *g:netrw_cursorline*		= 1 (default)
-				will use the |'cursorline'| local setting when
-				|g:netrw_liststyle| ==0 (thin listing) or
-				|g:netrw_liststyle| ==1 (long listing) or
-				|g:netrw_liststyle| ==3 (tree listing)
-				(ie. doesn't affect the wide listing)
-				=0: off
-				=2: like ==1, but the wide listing gets both
-				cursorline and |'cursorcolumn'|locally set
+  *g:netrw_cursor*		  = 2 (default)
+  				This option controls the use of the
+				|'cursorline'| (cul) and |'cursorcolumn'|
+				(cuc) settings by netrw:
 
-  *g:netrw_decompress*		= { ".gz" : "gunzip" ,
+				Value   Thin-Long-Tree      Wide
+				 =0      u-cul u-cuc      u-cul u-cuc
+				 =1      u-cul u-cuc        cul u-cuc
+				 =2        cul u-cuc        cul u-cuc
+				 =3        cul u-cuc        cul   cuc
+				 =4        cul   cuc        cul   cuc
+
+				Where
+				  u-cul : user's |'cursorline'|   setting used
+				  u-cuc : user's |'cursorcolumn'| setting used
+				  cul   : |'cursorline'|  locally set
+				  cuc   : |'cursorcolumn'| locally set
+
+  *g:netrw_decompress*		  = { ".gz" : "gunzip" ,
 				    ".bz2" : "bunzip2" ,
 				    ".zip" : "unzip" ,
 				    ".tar" : "tar -xf"}
 				  A dictionary mapping suffices to
 				  decompression programs.
 
-  *g:netrw_fastbrowse*		=0: slow speed directory browsing;
+  *g:netrw_dirhistmax*            =10: controls maximum quantity of past
+                                     history.  May be zero to supppress
+				     history.
+				     (related: |netrw-qb| |netrw-u| |netrw-U|)
+
+  *g:netrw_fastbrowse*		  =0: slow speed directory browsing;
 				    never re-uses directory listings,
 				    always obtains directory listings.
 				=1: medium speed directory browsing;
@@ -2007,10 +2062,10 @@
 				trading off accuracy (ie. up-to-date listing)
 				versus speed.
 
-  *g:netrw_fname_escape*	=' ?&;%'
+  *g:netrw_fname_escape*	  =' ?&;%'
 				Used on filenames before remote reading/writing
 
-  *g:netrw_ftp_browse_reject*	ftp can produce a number of errors and warnings
+  *g:netrw_ftp_browse_reject*	  ftp can produce a number of errors and warnings
 				that can show up as "directories" and "files"
 				in the listing.  This pattern is used to
 				remove such embedded messages.  By default its
@@ -2023,87 +2078,87 @@
 				 : connect to address [0-9a-fA-F:]*
 				 : No route to host$'
 
-  *g:netrw_ftp_list_cmd*	options for passing along to ftp for directory
+  *g:netrw_ftp_list_cmd*	  options for passing along to ftp for directory
 				listing.  Defaults:
 				 unix or g:netrw_cygwin set: : "ls -lF"
 				 otherwise                     "dir"
 
 
-  *g:netrw_ftp_sizelist_cmd*	options for passing along to ftp for directory
+  *g:netrw_ftp_sizelist_cmd*	  options for passing along to ftp for directory
 				listing, sorted by size of file.
 				Defaults:
 				 unix or g:netrw_cygwin set: : "ls -slF"
 				 otherwise                     "dir"
 
-  *g:netrw_ftp_timelist_cmd*	options for passing along to ftp for directory
+  *g:netrw_ftp_timelist_cmd*	  options for passing along to ftp for directory
 				listing, sorted by time of last modification.
 				Defaults:
 				 unix or g:netrw_cygwin set: : "ls -tlF"
 				 otherwise                     "dir"
 
-  *g:netrw_glob_escape*		='[]*?`{~$'  (unix)
+  *g:netrw_glob_escape*		  ='[]*?`{~$'  (unix)
 				='[]*?`{$'  (windows
 				These characters in directory names are
 				escaped before applying glob()
 
-  *g:netrw_hide*		if true, the hiding list is used
+  *g:netrw_hide*		  if true, the hiding list is used
 				 default: =0
 
-  *g:netrw_home*		The home directory for where bookmarks and
+  *g:netrw_home*		  The home directory for where bookmarks and
 				history are saved (as .netrwbook and
 				.netrwhist).
 				 default: the first directory on the
 				         |'runtimepath'|
 
-  *g:netrw_keepdir*		=1 (default) keep current directory immune from
+  *g:netrw_keepdir*		  =1 (default) keep current directory immune from
 				   the browsing directory.
 				=0 keep the current directory the same as the
 				   browsing directory.
 				The current browsing directory is contained in
 				b:netrw_curdir (also see |netrw-c|)
 
-  *g:netrw_list_cmd*		command for listing remote directories
+  *g:netrw_list_cmd*		  command for listing remote directories
 				 default: (if ssh is executable)
 				          "ssh HOSTNAME ls -FLa"
 
-  *g:netrw_liststyle*		Set the default listing style:
+  *g:netrw_liststyle*		  Set the default listing style:
                                 = 0: thin listing (one file per line)
                                 = 1: long listing (one file per line with time
 				     stamp information and file size)
 				= 2: wide listing (multiple files in columns)
 				= 3: tree style listing
-  *g:netrw_list_hide*		comma separated pattern list for hiding files
+  *g:netrw_list_hide*		  comma separated pattern list for hiding files
 				Patterns are regular expressions (see |regexp|)
 				Example: let g:netrw_list_hide= '.*\.swp$'
 				 default: ""
 
-  *g:netrw_localcopycmd*	="cp" Linux/Unix/MacOS/Cygwin
+  *g:netrw_localcopycmd*	  ="cp" Linux/Unix/MacOS/Cygwin
 				="copy" Windows
 				Copies marked files (|netrw-mf|) to target
 				directory (|netrw-mt|, |netrw-mc|)
 
-  *g:netrw_localmovecmd*	="mv" Linux/Unix/MacOS/Cygwin
+  *g:netrw_localmovecmd*	  ="mv" Linux/Unix/MacOS/Cygwin
 				="move" Windows
 				Moves marked files (|netrw-mf|) to target
 				directory (|netrw-mt|, |netrw-mm|)
 
-  *g:netrw_local_mkdir*		command for making a local directory
+  *g:netrw_local_mkdir*		  command for making a local directory
 				 default: "mkdir"
 
-  *g:netrw_local_rmdir*		remove directory command (rmdir)
+  *g:netrw_local_rmdir*		  remove directory command (rmdir)
 				 default: "rmdir"
 
-  *g:netrw_maxfilenamelen*	=32 by default, selected so as to make long
+  *g:netrw_maxfilenamelen*	  =32 by default, selected so as to make long
 				    listings fit on 80 column displays.
 				If your screen is wider, and you have file
 				or directory names longer than 32 bytes,
 				you may set this option to keep listings
 				columnar.
 
-  *g:netrw_mkdir_cmd*		command for making a remote directory
+  *g:netrw_mkdir_cmd*		  command for making a remote directory
 				 default: "ssh USEPORT HOSTNAME mkdir"
 
-  *g:netrw_mousemaps*		=1 (default) enables the mouse buttons
+  *g:netrw_mousemaps*		  =1 (default) enables the mouse buttons
 				   while browsing:
 				     leftmouse       : open file/directory
 				     shift-leftmouse : mark file
@@ -2111,7 +2166,7 @@
 				     rightmouse      : remove file/directory
 				=0: disables mouse maps
 
-  *g:netrw_retmap*		if it exists and is set to one, then:
+  *g:netrw_retmap*		  if it exists and is set to one, then:
 				 * if in a netrw-selected file, AND
 				 * no normal-mode <2-leftmouse> mapping exists,
 				then the <2-leftmouse> will be mapped for easy
@@ -2130,22 +2185,22 @@
 
 				  default: =0
 
-  *g:netrw_rm_cmd*		command for removing files
+  *g:netrw_rm_cmd*		  command for removing files
 				 default: "ssh USEPORT HOSTNAME rm"
 
-  *g:netrw_rmdir_cmd*		command for removing directories
+  *g:netrw_rmdir_cmd*		  command for removing directories
 				 default: "ssh USEPORT HOSTNAME rmdir"
 
-  *g:netrw_rmf_cmd*		 command for removing softlinks
+  *g:netrw_rmf_cmd*		   command for removing softlinks
 				 default: "ssh USEPORT HOSTNAME rm -f"
 
-  *g:netrw_sort_by*		sort by "name", "time", or "size"
+  *g:netrw_sort_by*		  sort by "name", "time", or "size"
 				 default: "name"
 
-  *g:netrw_sort_direction*	sorting direction: "normal" or "reverse"
+  *g:netrw_sort_direction*	  sorting direction: "normal" or "reverse"
 				 default: "normal"
 
-  *g:netrw_sort_options*	sorting is done using |:sort|; this
+  *g:netrw_sort_options*	  sorting is done using |:sort|; this
 				variable's value is appended to the
 				sort command.  Thus one may ignore case,
 				for example, with the following in your
@@ -2153,14 +2208,14 @@
 					let g:netrw_sort_options="i"
 <				 default: ""
 
-  *g:netrw_sort_sequence*	when sorting by name, first sort by the
+  *g:netrw_sort_sequence*	  when sorting by name, first sort by the
 				comma-separated pattern sequence.  Note that
 				the filigree added to indicate filetypes
 				should be accounted for in your pattern.
 				 default: '[\/]$,*,\.bak$,\.o$,\.h$,
 				           \.info$,\.swp$,\.obj$'
 
-  *g:netrw_special_syntax*	If true, then certain files will be shown
+  *g:netrw_special_syntax*	  If true, then certain files will be shown
 				in special syntax in the browser:
 
 					netrwBak     : *.bak
@@ -2171,7 +2226,7 @@
 					netrwMakefile: [mM]akefile *.mak
 					netrwObj     : *.o *.obj
 					netrwTags    : tags ANmenu ANtags
-					netrwTilde   : *~ 
+					netrwTilde   : *~
 					netrwTmp     : tmp* *tmp
 
 				These syntax highlighting groups are linked
@@ -2182,12 +2237,12 @@
 <				into one's <.vimrc> to use one's own
 				preferences.
 
-  *g:netrw_ssh_cmd*		One may specify an executable command
+  *g:netrw_ssh_cmd*		  One may specify an executable command
 				to use instead of ssh for remote actions
 				such as listing, file removal, etc.
 				 default: ssh
 
-  *g:netrw_ssh_browse_reject*	ssh can sometimes produce unwanted lines,
+  *g:netrw_ssh_browse_reject*	  ssh can sometimes produce unwanted lines,
 				messages, banners, and whatnot that one doesn't
 				want masquerading as "directories" and "files".
 				Use this pattern to remove such embedded
@@ -2195,11 +2250,11 @@
 					 '^total\s\+\d\+$'
 
 
-  *g:netrw_tmpfile_escape*	=' &;'
+  *g:netrw_tmpfile_escape*	  =' &;'
 				escape() is applied to all temporary files
 				to escape these characters.
 
-  *g:netrw_timefmt*		specify format string to vim's strftime().
+  *g:netrw_timefmt*		  specify format string to vim's strftime().
 				The default, "%c", is "the preferred date
 				and time representation for the current
 				locale" according to my manpage entry for
@@ -2209,7 +2264,7 @@
 				 " %a %Y-%m-%d  %I-%M-%S %p"
 				 default: "%c"
 
-  *g:netrw_use_noswf*		netrw normally avoids writing swapfiles
+  *g:netrw_use_noswf*		  netrw normally avoids writing swapfiles
 				for browser buffers.  However, under some
 				systems this apparently is causing nasty
 				ml_get errors to appear; if you're getting
@@ -2217,12 +2272,12 @@
 				  let g:netrw_use_noswf= 0
 				in your .vimrc.
 
-  *g:netrw_winsize*		specify initial size of new windows made with
+  *g:netrw_winsize*		  specify initial size of new windows made with
 				"o" (see |netrw-o|), "v" (see |netrw-v|),
 				|:Hexplore| or |:Vexplore|.
 				 default: ""
 
-  *g:netrw_xstrlen*		Controls how netrw computes string lengths,
+  *g:netrw_xstrlen*		  Controls how netrw computes string lengths,
 				including multi-byte characters' string
 				length. (thanks to N Weibull, T Mechelynck)
 				=0: uses Vim's built-in strlen()
@@ -2238,7 +2293,7 @@
 				    immediately preceded by lam, one
 				    otherwise, etc)
 
-  *g:NetrwTopLvlMenu*		This variable specifies the top level
+  *g:NetrwTopLvlMenu*		  This variable specifies the top level
 				menu name; by default, it's "Netrw.".  If
 				you wish to change this, do so in your
 				.vimrc.
@@ -2254,7 +2309,7 @@
 autochdir sets the current directory to that containing the "file" (even if
 that "file" is itself a directory).
 
-NETRW SETTINGS						*netrw-settings* {{{2
+NETRW BROWSER SETTINGS						*netrw-settings* {{{2
 
 With the NetrwSettings.vim plugin, >
 	:NetrwSettings
@@ -2298,6 +2353,7 @@
    directory, see |g:netrw_keepdir|.
 
 
+							*netrw-createfile*
 OPEN A NEW FILE IN NETRW'S CURRENT DIRECTORY		*netrw-%*
 
 To open a file in netrw's current directory, press "%".  This map will
@@ -2655,13 +2711,13 @@
 ==============================================================================
 11. Debugging Netrw Itself				*netrw-debug* {{{1
 
-The <netrw.vim> script is typically available as:
+The <netrw.vim> script is typically available as something like:
 >
-	/usr/local/share/vim/vim6x/plugin/netrwPlugin.vim
-	/usr/local/share/vim/vim6x/autoload/netrw.vim
-< -or- >
 	/usr/local/share/vim/vim7x/plugin/netrwPlugin.vim
 	/usr/local/share/vim/vim7x/autoload/netrw.vim
+< -or- >
+	/usr/local/share/vim/vim6x/plugin/netrwPlugin.vim
+	/usr/local/share/vim/vim6x/autoload/netrw.vim
 <
 which is loaded automatically at startup (assuming :set nocp).
 
@@ -2706,6 +2762,16 @@
 ==============================================================================
 12. History						*netrw-history* {{{1
 
+	v141: Aug 28, 2010 * added -s:... support for Windows ftp
+			   * restored 2-leftmouse for :Rex-like return
+			   * added balloon help for banner
+	      Oct 26, 2010 * :Texplore changed to start from netrw's idea
+			     of the current directory, not pwd's
+	      Feb 10, 2011 * netrwPlugin modified to use BufReadCmd
+			     when the "filename" ends with a "/" or a "\"
+			     Avoids "... is a directory" message, works
+			     inside a try-catch-endtry clause.
+	      Feb 22, 2011 * for menus, &go =~# used to insure correct case
 	v140: Jul 27, 2010 * (Lech Lorens) unexpected change of window
 	v139: May 14, 2010 * when viewing remote directory listings and
 			     changing listing style, going to tree listing
@@ -2732,7 +2798,7 @@
 	v137: Dec 28, 2009 * modified the preview window handling for
 			     vertically split windows.  The preview
 			     window will take up all but g:netrw_winsize
-			     columns of the original window; those 
+			     columns of the original window; those
 			     g:netrw_winsize columns will be used for
 			     the netrw listing.
 			   * (Simon Dambe) removed "~" from
diff --git a/runtime/doc/syntax.txt b/runtime/doc/syntax.txt
index 212aa77..6c39274 100644
--- a/runtime/doc/syntax.txt
+++ b/runtime/doc/syntax.txt
@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 7.3.  Last change: 2011 Jan 22
+*syntax.txt*	For Vim version 7.3.  Last change: 2011 Apr 01
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -3223,6 +3223,9 @@
    :hi par1 ctermfg=red guifg=red
    :hi par2 ctermfg=blue guifg=blue
    :hi par3 ctermfg=darkgreen guifg=darkgreen
+<
+						*E849*
+The maximum number of syntax groups is 19999.
 
 ==============================================================================
 6. :syntax arguments					*:syn-arguments*
@@ -3761,6 +3764,9 @@
    :syntax match Stuff "( aaa bbb )" contains=@BigGroup
    :syntax cluster BigGroup remove=B	" no effect, since B isn't in BigGroup
    :syntax cluster SmallGroup remove=B	" now bbb isn't matched within Stuff
+<
+						*E848*
+The maximum number of clusters is 9767.
 
 ==============================================================================
 9. Including syntax files				*:syn-include* *E397*
@@ -3800,6 +3806,9 @@
 	  with his own version, without replacing the file that does the ":syn
 	  include".
 
+						*E847*
+The maximum number of includes is 999.
+
 ==============================================================================
 10. Synchronizing				*:syn-sync* *E403* *E404*
 
diff --git a/runtime/doc/tags b/runtime/doc/tags
index dcc11c8..bee39c1 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -4229,6 +4229,10 @@
 E843	editing.txt	/*E843*
 E844	syntax.txt	/*E844*
 E845	spell.txt	/*E845*
+E846	options.txt	/*E846*
+E847	syntax.txt	/*E847*
+E848	syntax.txt	/*E848*
+E849	syntax.txt	/*E849*
 E85	options.txt	/*E85*
 E86	windows.txt	/*E86*
 E87	windows.txt	/*E87*
@@ -4861,6 +4865,8 @@
 c_<S-Up>	cmdline.txt	/*c_<S-Up>*
 c_<Tab>	cmdline.txt	/*c_<Tab>*
 c_<Up>	cmdline.txt	/*c_<Up>*
+c_BS	cmdline.txt	/*c_BS*
+c_CR	cmdline.txt	/*c_CR*
 c_CTRL-A	cmdline.txt	/*c_CTRL-A*
 c_CTRL-B	cmdline.txt	/*c_CTRL-B*
 c_CTRL-C	cmdline.txt	/*c_CTRL-C*
@@ -4893,6 +4899,15 @@
 c_CTRL-]	cmdline.txt	/*c_CTRL-]*
 c_CTRL-^	cmdline.txt	/*c_CTRL-^*
 c_CTRL-_	cmdline.txt	/*c_CTRL-_*
+c_Del	cmdline.txt	/*c_Del*
+c_Down	cmdline.txt	/*c_Down*
+c_End	cmdline.txt	/*c_End*
+c_Esc	cmdline.txt	/*c_Esc*
+c_Home	cmdline.txt	/*c_Home*
+c_Insert	cmdline.txt	/*c_Insert*
+c_Left	cmdline.txt	/*c_Left*
+c_Right	cmdline.txt	/*c_Right*
+c_Up	cmdline.txt	/*c_Up*
 c_digraph	cmdline.txt	/*c_digraph*
 c_wildchar	cmdline.txt	/*c_wildchar*
 call()	eval.txt	/*call()*
@@ -5750,10 +5765,11 @@
 g:netrw_chgwin	pi_netrw.txt	/*g:netrw_chgwin*
 g:netrw_compress	pi_netrw.txt	/*g:netrw_compress*
 g:netrw_ctags	pi_netrw.txt	/*g:netrw_ctags*
-g:netrw_cursorline	pi_netrw.txt	/*g:netrw_cursorline*
+g:netrw_cursor	pi_netrw.txt	/*g:netrw_cursor*
 g:netrw_cygwin	pi_netrw.txt	/*g:netrw_cygwin*
 g:netrw_dav_cmd	pi_netrw.txt	/*g:netrw_dav_cmd*
 g:netrw_decompress	pi_netrw.txt	/*g:netrw_decompress*
+g:netrw_dirhistmax	pi_netrw.txt	/*g:netrw_dirhistmax*
 g:netrw_fastbrowse	pi_netrw.txt	/*g:netrw_fastbrowse*
 g:netrw_fetch_cmd	pi_netrw.txt	/*g:netrw_fetch_cmd*
 g:netrw_fname_escape	pi_netrw.txt	/*g:netrw_fname_escape*
@@ -6710,6 +6726,7 @@
 netrw-contents	pi_netrw.txt	/*netrw-contents*
 netrw-copyright	pi_netrw.txt	/*netrw-copyright*
 netrw-cr	pi_netrw.txt	/*netrw-cr*
+netrw-createfile	pi_netrw.txt	/*netrw-createfile*
 netrw-credits	pi_netrw.txt	/*netrw-credits*
 netrw-ctrl-h	pi_netrw.txt	/*netrw-ctrl-h*
 netrw-ctrl-l	pi_netrw.txt	/*netrw-ctrl-l*
@@ -6733,7 +6750,9 @@
 netrw-ftp	pi_netrw.txt	/*netrw-ftp*
 netrw-ftype	pi_netrw.txt	/*netrw-ftype*
 netrw-gb	pi_netrw.txt	/*netrw-gb*
+netrw-gd	pi_netrw.txt	/*netrw-gd*
 netrw-getftype	pi_netrw.txt	/*netrw-getftype*
+netrw-gf	pi_netrw.txt	/*netrw-gf*
 netrw-gh	pi_netrw.txt	/*netrw-gh*
 netrw-gp	pi_netrw.txt	/*netrw-gp*
 netrw-gx	pi_netrw.txt	/*netrw-gx*
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index e6effd9..f7a96b6 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 7.3.  Last change: 2011 Mar 22
+*todo.txt*      For Vim version 7.3.  Last change: 2011 Apr 01
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -30,129 +30,21 @@
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
-The :z command doesn't work exactly as it should. (ChangZhuo Chen, 2011 Mar 2)
-Compare with how old Vi works and with posix spec.  terminal is 80 x 24,
-'scroll' option set to 11.
-
-Crash with ":python help(dir)". (Kearn Holliday, 2011 Mar 19)
-I can reproduce it.  Don't know why it happens.
-
-'cursorline' is displayed too short when there are concealed characters and
-'list' is set.  (Dennis Preiser)
-Patch 7.3.116 was the wrong solution.
-
-When opening file from windows explorer, characters inside [] cause
-problems, even though double quotes are used. (Manuel Stol, 2011 Mar 9)
-
-Patch for Vim indent file. (Cocular, 2011 Mar)
-
-:help c_Esc should work, but only :help c_<Esc> does.
-
-Patch to change the meaning of \n in substitute(). (motoya kurotsu, 2011 Mar 8)
-
-New version of Pascal indent file. (Neil Carter, 2011 Mar 9)
-
-Help file foldexpr (ZyX)
-
-upstart syntax file (James Hunt, Mar 11 2011)
-
-Syntax region with 'concealends' and a 'cchar' value, 'conceallevel' set to 2,
-only one of the two ends gets the cchar displayed. (Brett Stahlman, 2010 Aug
-21, Ben Fritz, 2010 Sep 14)
-
-Bug in repeating Visual "u". (Lawrence Kesteloot, 2010 Dec 20)
-
-Crash with big .xpm file. (Yukihiro Nakadaira, 2011 Feb 18)
-Patch from Ben Schmidt (2011 Mar 3).  Needs some more work.
-
-Patch for disappearing cursor after netbeans command. (Xavier de Gaye, 2011
-Mar 4)
-
-Windows keys not set properly on Windows 7?  (cncyber, 2010 Aug 26)
-
-Compiler scripts for fortran (Hong Xu, 2011 March 19)
-
-This line hangs Vim, because of syntax HL:
-call append(line, "INFO  ....12....18....24....30....36....42....48....54....60....66....72....78%$")
-
-Building the MingW version without clipboard but with multi-byte doesn't
-work. (Bill Lam, 2010 Sep 18)
-
-Patch for handling of NL in substitute() with \= expression. (Motoya Kurotsu,
-2011 Mar 16)
-
-When using a Vim server, a # in the path causes an error message.
-(Jeff Lanzarotta, 2011 Feb 17)
-
-Bug: E685 error for func_unref(). (ZyX, 2010 Aug 5)
-
-Using ":break" or something else that stops executing commands inside a
-":finally" does not rethrow a previously uncaught exception. (ZyX, 2010 Oct
-15)
-
-Vim using lots of memory when joining lines. (John Little, 2010 Dec 3)
-
-On 64 bit MS-Windows "long" is only 32 bits, but we sometimes need to store a
-64 bits value.  Change all number options to use nropt_T and define it to the
-right type.
-
-Patch to improve mf_hash, dynamic sizing. (Ivan Krasilnikov, 2010 Dec 17)
-Update with tests: 2011 Feb 28.
-
-string() can't parse back "inf" and "nan".  Fix documentation or fix code?
-(ZyX, 2010 Aug 23)
-
-maparg() does not show the <script> flag.  When temporarily changing a
-mapping, how to restore the script ID?
-
-Patch to fix \%V item in regexp. (Christian Brabandt, 2010 Nov 8)
-Update Nov 19.  James Vega: still not right.  Christian: it's difficult.
-
-Patch to add up to 99 match groups. (Christian Brabandt, 2010 Dec 22)
-Also add named groups: \%{name}(re)  and \%{name}g
-
-Bug in try/catch: return with invalid compare throws error that isn't caught.
-(ZyX, 2011 Jan 26)
-
 Improvement patch for filetype.vim. (Thilo Six, 2011 Mar 19)
 
-Patch for "+ and "* getting same selection when "a" is not in 'guioptions'.
-(James Vega, 2011 Mar 17)
-
-Highlighting stops working after changing it many times.  Script to reproduce
-it: Pablo Contreras, 2010 Oct 12  Windows XP and 7.  Font is never freed?
-
-After patch 7.3.097 still get E15. (Yukihiro Nakadaira, 2011 Jan 18)
-Also for another example (ZyX, 2011 Jan 24)
-
-Build problem with small features on Mac OS X 10.6. (Rainer, 2011 Jan 24)
-
-"0g@$" puts '] on last byte of multi-byte. (ZyX, 2011 Jan 22)
-
-Deleting a linewise selection that includes the last line of the file leaves
-an empty line. (Ben Schmidt, 2011 Mar 17)
-Patch by Christian Brabandt, 2011 Mar 19.
+Patch to recognize more files as log files. (Mathieu Parent, 2011 Jan 14)
 
 Two patches for xxd. (Florian Zumbiehl, 2011 Jan 11)
 Two updates for second one Jan 12.
 
-Problem with "syn sync gouphere". (Gustavo Niemeyer, 2011 Jan 27)
-
-Loading autoload script even when usage is inside "if 0". (Christian Brabandt,
-2010 Dec 18)
+Go through new coverity reports.
 
 When 'colorcolumn' is set locally to a window, ":new" opens a window with the
 same highlighting but 'colorcolumn' is empty. (Tyru, 2010 Nov 15)
 Patch by Christian Brabandt, 2011 Feb 13 (but move further down).
 
-In the sandbox it's not allowed to do many things, but it's possible to change
-or set variables.  Add a way to prevent variables from being changed in the
-sandbox?  E.g.: ":protect g:restore_settings".
-
 Patch for configure related to Ruby on Mac OS X. (Bjorn Winckler, 2011 Jan 14)
 
-Patch to recognize more files as log files. (Mathieu Parent, 2011 Jan 14)
-
 Patch to set v:register on startup. (Ingo Karkat, 2011 Jan 16)
 
 Patch to set v:register default depending on "unnamed" in 'clipboard'. (Ingo
@@ -170,28 +62,9 @@
 
 Patch for cmdline completion of ":lang".  (Dominique Pelle, 2011 Feb 5)
 
-GTK: drawing a double-width combining character over single-width characters
-doesn't look right. (Dominique Pelle, 2010 Aug 8)
-
-GTK: tear-off menu does not work. (Kurt Sonnenmoser, 2010 Oct 25)
-
-Win32: tear-off menu does not work when menu language is German. (Markus
-Bossler, 2011 Mar 2)  Fixed by 7.3.095?
-
 Patch for adding 's' option to 'cino', C++ namespace indenting. (Konstantin
 Lepa, 2011 Jan 18)
 
-Version of netbeans.c for use with MacVim. (Kazuki Sakamoto, 2010 Nov 18)
-
-7.3.014 changed how backslash at end of line works, but still get a NUL when
-there is one backslash. (Ray Frush, 2010 Nov 18)  What does the original ex
-do?
-
-":find" completion does not escape space in directory name. (Isz, 2010 Nov 2)
-
-Searching mixed with Visual mode doesn't redraw properly. (James Vega, 2010 Nov
-22)
-
 Patch to support ":!start /b cmd". (Xaizek, 2010 Dec 22)
 
 Patch to build with GTK on Mac. (Ben Schmidt, 2011 Jan 18)
@@ -207,6 +80,135 @@
 
 Patch for Python 3 support. (lilydjwg, 2011 Feb 24)
 
+Building the MingW version without clipboard but with multi-byte doesn't
+work. (Bill Lam, 2010 Sep 18)
+
+Patch for handling of NL in substitute() with \= expression. (Motoya Kurotsu,
+2011 Mar 16)  Update Mar 24.
+
+Patch to disallow fork() when __APPLE__ is defined. (Hisashi T Fujinaka, 2010
+Nov 25)
+
+GTK: Patch to fix menu popping down. (Hong Xu, 2010 Dec 4, Dec 5)
+Update 2011 Feb 3.
+
+Patch to use pipes on Win32.  (Vincent Berthoux, 2011 Feb 28)
+Update Mar 1 using 'shelltemp'.
+
+"gh<Del>" deletes the current line, except when it's the last line.
+Hint by Christian Brabandt, 2011 Mar 22
+
+The :z command doesn't work exactly as it should. (ChangZhuo Chen, 2011 Mar 2)
+Compare with how old Vi works and with posix spec.  terminal is 80 x 24,
+'scroll' option set to 11.
+
+'cursorline' is displayed too short when there are concealed characters and
+'list' is set.  (Dennis Preiser)
+Patch 7.3.116 was the wrong solution.
+
+When opening file from windows explorer, characters inside [] cause
+problems, even though double quotes are used. (Manuel Stol, 2011 Mar 9)
+
+Patch to change the meaning of \n in substitute(). (motoya kurotsu, 2011 Mar 8)
+
+Help file foldexpr (ZyX)
+
+Syntax region with 'concealends' and a 'cchar' value, 'conceallevel' set to 2,
+only one of the two ends gets the cchar displayed. (Brett Stahlman, 2010 Aug
+21, Ben Fritz, 2010 Sep 14)
+
+Bug in repeating Visual "u". (Lawrence Kesteloot, 2010 Dec 20)
+
+CursorHold repeats typed key when it's the start of a mapping.
+(Will Gray, 2011 Mar 23)
+
+Windows keys not set properly on Windows 7?  (cncyber, 2010 Aug 26)
+
+This line hangs Vim, because of syntax HL:
+call append(line, "INFO  ....12....18....24....30....36....42....48....54....60....66....72....78%$")
+
+When using a Vim server, a # in the path causes an error message.
+(Jeff Lanzarotta, 2011 Feb 17)
+
+Bug: E685 error for func_unref(). (ZyX, 2010 Aug 5)
+
+Using ":break" or something else that stops executing commands inside a
+":finally" does not rethrow a previously uncaught exception. (ZyX, 2010 Oct
+15)
+
+Vim using lots of memory when joining lines. (John Little, 2010 Dec 3)
+
+On 64 bit MS-Windows "long" is only 32 bits, but we sometimes need to store a
+64 bits value.  Change all number options to use nropt_T and define it to the
+right type.
+
+string() can't parse back "inf" and "nan".  Fix documentation or fix code?
+(ZyX, 2010 Aug 23)
+
+When doing "redir => s:foo" in a script and then "redir END" somewhere else
+(e.g. in a function) it can't find s:foo.
+
+maparg() does not show the <script> flag.  When temporarily changing a
+mapping, how to restore the script ID?
+
+Patch to fix \%V item in regexp. (Christian Brabandt, 2010 Nov 8)
+Update Nov 19.  James Vega: still not right.  Christian: it's difficult.
+
+Patch to add up to 99 match groups. (Christian Brabandt, 2010 Dec 22)
+Also add named groups: \%{name}(re)  and \%{name}g
+
+Bug in try/catch: return with invalid compare throws error that isn't caught.
+(ZyX, 2011 Jan 26)
+
+Highlighting stops working after changing it many times.  Script to reproduce
+it: Pablo Contreras, 2010 Oct 12  Windows XP and 7.  Font is never freed?
+
+After patch 7.3.097 still get E15. (Yukihiro Nakadaira, 2011 Jan 18)
+Also for another example (ZyX, 2011 Jan 24)
+
+Build problem with small features on Mac OS X 10.6. (Rainer, 2011 Jan 24)
+
+"0g@$" puts '] on last byte of multi-byte. (ZyX, 2011 Jan 22)
+
+Deleting a linewise selection that includes the last line of the file leaves
+an empty line. (Ben Schmidt, 2011 Mar 17)
+Patch by Christian Brabandt, 2011 Mar 19.
+
+Patch to support sorting on floating point number.  (Alex Jakushev, 2010 Oct
+30)
+
+When a script contains "redir => s:foo" but doesn't end redirection, a
+following "redir" command gives an error for not being able to access s:foo.
+(ZyX, 2011 Mar 27)
+
+Problem with "syn sync gouphere". (Gustavo Niemeyer, 2011 Jan 27)
+
+Loading autoload script even when usage is inside "if 0". (Christian Brabandt,
+2010 Dec 18)
+
+In the sandbox it's not allowed to do many things, but it's possible to change
+or set variables.  Add a way to prevent variables from being changed in the
+sandbox?  E.g.: ":protect g:restore_settings".
+
+GTK: drawing a double-width combining character over single-width characters
+doesn't look right. (Dominique Pelle, 2010 Aug 8)
+
+GTK: tear-off menu does not work. (Kurt Sonnenmoser, 2010 Oct 25)
+
+Win32: tear-off menu does not work when menu language is German. (Markus
+Bossler, 2011 Mar 2)  Fixed by 7.3.095?
+
+Version of netbeans.c for use with MacVim. (Kazuki Sakamoto, 2010 Nov 18)
+
+7.3.014 changed how backslash at end of line works, but still get a NUL when
+there is one backslash. (Ray Frush, 2010 Nov 18)  What does the original ex
+do?
+
+":find" completion does not escape space in directory name. (Isz, 2010 Nov 2)
+
+Searching mixed with Visual mode doesn't redraw properly. (James Vega, 2010 Nov
+22)
+
 New esperanto spell file can't be processed. (Dominique Pelle, 2011 Jan 30)
 - move compflags to separate growarray?
 - instead of a regexp use a hashtable.  Expand '?', '*", '+'.  What would be
@@ -235,15 +237,6 @@
 Since patch 7.2.46 Yankring plugin has become very slow, eventually make Vim
 crash? (Raiwil, 2010 Nov 17)
 
-Patch to disallow fork() when __APPLE__ is defined. (Hisashi T Fujinaka, 2010
-Nov 25)
-
-GTK: Patch to fix menu popping down. (Hong Xu, 2010 Dec 4, Dec 5)
-Update 2011 Feb 3.
-
-Patch to use pipes on Win32.  (Vincent Berthoux, 2011 Feb 28)
-Update Mar 1 using 'shelltemp'.
-
 Python: Adding line to buffer other than the current one doesn't work
 correctly. (Rozbujnik, 2010 Dec 19)
 
@@ -255,9 +248,6 @@
 Problem producing tags file when hebrew.frx is present.  It has a BOM.
 Results in E670. (Tony Mechelynck, 2010 May 2)
 
-Patch to support sorting on floating point number.  (Alex Jakushev, 2010 Oct
-30)
-
 Ruby: ":ruby print $buffer.number" returns zero.
 
 setpos() does not restore cursor position after :normal. (Tyru, 2010 Aug 11)
@@ -896,6 +886,9 @@
 ":ccl" closes the quickfix window.  Add ":hclose". (Chris Gaal)
 Patch for :helpclose, Christian Brabandt, 2010 Sep 6.
 
+Patch for :lmake not updating the quickfix window title. (Lech Lorens, 2011
+Mar 26)
+
 When 'diffopt' has "context:0" a single deleted line causes two folds to merge
 and mess up syncing. (Austin Jennings, 2008 Jan 31)