diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt
index efbac91..661832d 100644
--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 7.4.  Last change: 2014 Feb 11
+*eval.txt*	For Vim version 7.4.  Last change: 2014 Mar 22
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -2815,7 +2815,7 @@
 			<afile>		autocmd file name
 			<abuf>		autocmd buffer number (as a String!)
 			<amatch>	autocmd matched name
-			<sfile>		sourced script file name
+			<sfile>		sourced script file or function name
 			<slnum>		sourced script file line number
 			<cword>		word under the cursor
 			<cWORD>		WORD under the cursor
@@ -6624,7 +6624,8 @@
 :fu[nction][!] {name}([arguments]) [range] [abort] [dict]
 			Define a new function by the name {name}.  The name
 			must be made of alphanumeric characters and '_', and
-			must start with a capital or "s:" (see above).
+			must start with a capital or "s:" (see above).  When
+			using a capital "g:" be prepended.
 
 			{name} can also be a |Dictionary| entry that is a
 			|Funcref|: >
@@ -7463,10 +7464,11 @@
 		:execute "!ls " . shellescape(filename, 1)
 <
 			Note: The executed string may be any command-line, but
-			you cannot start or end a "while", "for" or "if"
-			command.  Thus this is illegal: >
+			you cannot start or end a "while" or "for" command.
+			Thus this is illegal: >
 		:execute 'while i > 5'
 		:execute 'echo "test" | break'
+		:endwhile
 <
 			It is allowed to have a "while" or "if" command
 			completely in the executed string: >
diff --git a/runtime/doc/index.txt b/runtime/doc/index.txt
index 68dceb9..f6197e5 100644
--- a/runtime/doc/index.txt
+++ b/runtime/doc/index.txt
@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 7.4.  Last change: 2013 Nov 14
+*index.txt*     For Vim version 7.4.  Last change: 2014 Mar 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1124,8 +1124,8 @@
 |:cNfile|	:cNf[ile]	go to last error in previous file
 |:cabbrev|	:ca[bbrev]	like ":abbreviate" but for Command-line mode
 |:cabclear|	:cabc[lear]	clear all abbreviations for Command-line mode
-|:caddbuffer|	:caddb[uffer]	add errors from buffer
-|:caddexpr|	:cad[dexpr]	add errors from expr
+|:caddbuffer|	:cad[dbuffer]	add errors from buffer
+|:caddexpr|	:cadde[xpr]	add errors from expr
 |:caddfile|	:caddf[ile]	add error message to current quickfix list
 |:call|		:cal[l]		call a function
 |:catch|	:cat[ch]	part of a :try command
diff --git a/runtime/doc/os_vms.txt b/runtime/doc/os_vms.txt
index a136ba7..03b11ba 100644
--- a/runtime/doc/os_vms.txt
+++ b/runtime/doc/os_vms.txt
@@ -1,4 +1,4 @@
-*os_vms.txt*    For Vim version 7.4.  Last change: 2013 Aug 22
+*os_vms.txt*    For Vim version 7.4.  Last change: 2014 Feb 24
 
 
 		  VIM REFERENCE MANUAL
diff --git a/runtime/doc/pi_netrw.txt b/runtime/doc/pi_netrw.txt
index 786933a..32ed1bf 100644
--- a/runtime/doc/pi_netrw.txt
+++ b/runtime/doc/pi_netrw.txt
@@ -1,4 +1,4 @@
-*pi_netrw.txt*  For Vim version 7.4.  Last change: 2014 Jan 21
+*pi_netrw.txt*  For Vim version 7.4.  Last change: 2014 Mar 20
 
 	    ------------------------------------------------
 	    NETRW REFERENCE MANUAL    by Charles E. Campbell
@@ -49,6 +49,7 @@
       Quick Reference: Commands...........................|netrw-browse-cmds|
       Bookmarking A Directory.............................|netrw-mb|
       Browsing............................................|netrw-cr|
+        Squeezing the Current Tree-Listing Directory......|:netrw-s-cr|
       Browsing With A Horizontally Split Window...........|netrw-o|
       Browsing With A New Tab.............................|netrw-t|
       Browsing With A Vertically Split Window.............|netrw-v|
@@ -1179,6 +1180,12 @@
 always refresh directory listing buffers by pressing ctrl-L (see
 |netrw-ctrl-l|).
 
+								*:netrw-s-cr*
+    Squeezing the Current Tree-Listing Directory~
+    When the tree listing style is enabled (see |netrw-i|) and one is using
+    gvim, then the <s-cr> mapping may be used to squeeze (close) the
+    directory currently containing the cursor.
+
 
 Related topics: |netrw-o| |netrw-p| |netrw-P| |netrw-t| |netrw-v|
 Associated setting variables: |g:netrw_browse_split|      |g:netrw_fastbrowse|
@@ -1482,7 +1489,7 @@
 
      :[N]Explore[!]  [dir]... Explore directory of current file      *:Explore*
      :[N]Hexplore[!] [dir]... Horizontal Split & Explore             *:Hexplore*
-     :Rexplore            ... Return to Explorer                     *:Rexplore*
+     :Rexplore            ... Return to/from Explorer                *:Rexplore*
      :[N]Sexplore[!] [dir]... Split&Explore current file's directory *:Sexplore*
      :Texplore       [dir]... Tab              & Explore             *:Texplore*
      :[N]Vexplore[!] [dir]... Vertical   Split & Explore             *:Vexplore*
@@ -1492,23 +1499,36 @@
      :Nexplore............. go to next matching file                *:Nexplore*
      :Pexplore............. go to previous matching file            *:Pexplore*
 
+						*netrw-:Explore*
 :Explore  will open the local-directory browser on the current file's
           directory (or on directory [dir] if specified).  The window will be
 	  split only if the file has been modified, otherwise the browsing
 	  window will take over that window.  Normally the splitting is taken
 	  horizontally.
+	  Also see: |netrw-:Rexplore|
 :Explore! is like :Explore, but will use vertical splitting.
+						*netrw-:Lexplore*
 :Lexplore [dir] toggles an Explorer window on the left hand side
           of the current tab  It will open a netrw window on the current
-	  directory if [dir] is omitted.
+	  directory if [dir] is omitted; a :Lexplore [dir] will show
+	  the specified directory in the left-hand side browser display
+	  no matter from which window the command is issued.  By default,
+	  :Lexplore will change an uninitialized |g:netrw_chgwin| to 2;
+	  edits will thus be preferentially made in window#2.
+	  Also see: |netrw-C|| |g:netrw_chgwin| |g:netrw_winsize|
+	  	    |netrw-p| |netrw-P|| |g:netrw_browse_split|
+						*netrw-:Sexplore*
 :Sexplore will always split the window before invoking the local-directory
           browser.  As with Explore, the splitting is normally done
 	  horizontally.
 :Sexplore! [dir] is like :Sexplore, but the splitting will be done vertically.
+						*netrw-:Hexplore*
 :Hexplore  [dir] does an :Explore with |:belowright| horizontal splitting.
 :Hexplore! [dir] does an :Explore with |:aboveleft|  horizontal splitting.
+						*netrw-:Vexplore*
 :Vexplore  [dir] does an :Explore with |:leftabove|  vertical splitting.
 :Vexplore! [dir] does an :Explore with |:rightbelow| vertical splitting.
+						*netrw-:Texplore*
 :Texplore  [dir] does a |:tabnew| before generating the browser window
 
 By default, these commands use the current file's directory.  However, one may
@@ -1521,12 +1541,22 @@
 user, is used to control the quantity of rows and/or columns new explorer
 windows should have.
 
-:Rexplore  This command is a little different from the others.  When one
-           edits a file, for example by pressing <cr> when atop a file in
-	   a netrw browser window, :Rexplore will return the display to
-	   that of the last netrw browser window.  It is a command version
-	   of the <2-leftmouse> map (which is only available under gvim and
-	   cooperative terms).
+						*netrw-:Rexplore*
+:Rexplore  This command is a little different from the others as it doesn't
+	   necessarily open an Explorer window.
+
+	   Return to Explorer~
+	   When one edits a file, for example by pressing <cr> when the
+	   cursor is atop a file in a netrw browser window, :Rexplore will
+	   return the display to that of the last netrw browser window.
+
+	   Return from Explorer~
+	   Conversely, when one is editing a directory, issuing a :Rexplore
+	   will return to editing the last file being edited in that
+	   window.
+
+	   The <2-leftmouse> map (which is only available under gvim and
+	   cooperative terms) does the same as :Rexplore.
 
 Also see: |g:netrw_alto| |g:netrw_altv| |g:netrw_winsize|
 
@@ -1572,11 +1602,12 @@
 The status line will show, on the right hand side of the status line, a
 message like "Match 3 of 20".
 
-Associated setting variables: |g:netrw_keepdir|      |g:netrw_browse_split|
-                              |g:netrw_fastbrowse|   |g:netrw_ftp_browse_reject|
-			      |g:netrw_ftp_list_cmd| |g:netrw_ftp_sizelist_cmd|
-			      |g:netrw_ftp_timelist_cmd| |g:netrw_list_cmd|
-			      |g:netrw_liststyle|
+Associated setting variables:
+	|g:netrw_keepdir|          |g:netrw_browse_split|
+	|g:netrw_fastbrowse|       |g:netrw_ftp_browse_reject|
+	|g:netrw_ftp_list_cmd|     |g:netrw_ftp_sizelist_cmd|
+	|g:netrw_ftp_timelist_cmd| |g:netrw_list_cmd|
+	|g:netrw_liststyle|
 
 
 DISPLAYING INFORMATION ABOUT FILE				*netrw-qf* {{{2
@@ -1666,10 +1697,10 @@
 
 Netrw will use the command in |g:netrw_list_cmd| to perform the directory
 listing operation after changing HOSTNAME to the host specified by the
-user-provided url.  By default netrw provides the command as:
+user-prpvided url.  By default netrw provides the command as: >
 
 	ssh HOSTNAME ls -FLa
-
+<
 where the HOSTNAME becomes the [user@]hostname as requested by the attempt to
 read.  Naturally, the user may override this command with whatever is
 preferred.  The NetList function which implements remote browsing
@@ -1882,12 +1913,27 @@
 
 Associated setting variable: |g:netrw_keepdir|
 
-MARKING FILES							*netrw-mf* {{{2
+MARKING FILES					*netrw-:MF*	*netrw-mf* {{{2
 	(also see |netrw-mr|)
 
-One may mark files with the cursor atop a filename and then pressing "mf".
-With gvim, one may also mark files with <s-leftmouse>.  The following netrw
-maps make use of marked files:
+Netrw has several ways of marking files:
+
+	* One may mark files with the cursor atop a filename and
+	then pressing "mf".
+
+	* With gvim, in addition one may mark files with
+	<s-leftmouse>.
+
+	* One may use the :MF command, which takes a list of
+	files (for local directories, the list may include
+	wildcards -- see |glob()|) >
+
+		:MF *.c
+<
+	* Note that :MF uses |<f-args>| to break the line
+	at spaces.
+
+The following netrw maps make use of marked files:
 
     |netrw-a|	Hide marked files/directories
     |netrw-D|	Delete marked files/directories
@@ -1896,7 +1942,7 @@
     |netrw-me|	Edit marked files
     |netrw-mF|	Unmark marked files
     |netrw-mg|	Apply vimgrep to marked files
-    |netrw-mm|	Move marked files
+    |netrw-mm|	Move marked files to target
     |netrw-mp|	Print marked files
     |netrw-mt|	Set target for |netrw-mm| and |netrw-mc|
     |netrw-mT|	Generate tags using marked files
@@ -1933,6 +1979,12 @@
 commands which operate on marked files use one or the other of the marked file
 lists.
 
+Known Problem: if one is using tree mode (|g:netrw_liststyle|) and several
+directories have files with the same name,  then marking such a file will
+result in all such files being highlighted as if they were all marked.  The
+|markfilelist|, however, will only have the selected file in it.  This problem
+is unlikely to be fixed.
+
 
 UNMARKING FILES							*netrw-mF* {{{2
 	(also see |netrw-mf|)
@@ -2090,6 +2142,10 @@
   * However, if the cursor is atop a directory name, then that directory is
     used for the copy/move-to target
 
+  * One may use the :MT [directory] command to set the target	*netrw-:MT*
+    This command uses |<q-args>|, so spaces in the directory name are
+    permitted without escaping.
+
 There is only one copy/move-to target per vim session; ie. the target is a
 script variable (see |s:var|) and is shared between all netrw windows (in an
 instance of vim).
@@ -2120,9 +2176,9 @@
 in my <.vimrc>.
 
 When a remote set of files are tagged, the resulting tags file is "obtained";
-ie. a copy is transferred to the local system's directory.  The local tags
+ie. a copy is transferred to the local system's directory.  The now local tags
 file is then modified so that one may use it through the network.  The
-modification is concerns the names of the files in the tags; each filename is
+modification made concerns the names of the files in the tags; each filename is
 preceded by the netrw-compatible url used to obtain it.  When one subsequently
 uses one of the go to tag actions (|tags|), the url will be used by netrw to
 edit the desired file and go to the tag.
@@ -2131,34 +2187,38 @@
 
 MARKED FILES: TARGET DIRECTORY USING BOOKMARKS  		*netrw-Tb* {{{2
 
-Sets the marked file copy/move-to target (see |netrw-mc| and |netrw-mm|).
+Sets the marked file copy/move-to target.
 
 The |netrw-qb| map will give you a list of bookmarks (and history).
 One may choose one of the bookmarks to become your marked file
 target by using [count]Tb (default count: 1).
 
 Related topics:
+      Copying files to target............................|netrw-mc|
       Listing Bookmarks and History......................|netrw-qb|
       Marked Files: Setting The Target Directory.........|netrw-mt|
       Marked Files: Target Directory Using History.......|netrw-Th|
       Marking Files......................................|netrw-mf|
       Marking Files by Regular Expression................|netrw-mr|
+      Moving files to target.............................|netrw-mm|
 
 
 MARKED FILES: TARGET DIRECTORY USING HISTORY	  		*netrw-Th* {{{2
 
-Sets the marked file copy/move-to target (see |netrw-mc| and |netrw-mm|).
+Sets the marked file copy/move-to target.
 
 The |netrw-qb| map will give you a list of history (and bookmarks).
 One may choose one of the history entries to become your marked file
 target by using [count]Th (default count: 0; ie. the current directory).
 
 Related topics:
+      Copying files to target............................|netrw-mc|
       Listing Bookmarks and History......................|netrw-qb|
       Marked Files: Setting The Target Directory.........|netrw-mt|
       Marked Files: Target Directory Using Bookmarks.....|netrw-Tb|
       Marking Files......................................|netrw-mf|
       Marking Files by Regular Expression................|netrw-mr|
+      Moving files to target.............................|netrw-mm|
 
 
 MARKED FILES: UNMARKING						*netrw-mu* {{{2
@@ -2282,6 +2342,7 @@
   *g:netrw_dynamic_maxfilenamelen* =32: enables dynamic determination of
 				    |g:netrw_maxfilenamelen|, which affects
 				    local file long listing.
+
   *g:netrw_errorlvl*		=0: error levels greater than or equal to
 				    this are permitted to be displayed
 				    0: notes
@@ -2434,7 +2495,7 @@
 				evaluation will be suppressed
 				(see |'ballooneval'|)
 
-  *g:netrw_remote_mkdir*	command for making a local directory
+  *g:netrw_remote_mkdir*	command for making a remote directory
 				via ftp  (also see |g:netrw_mkdir_cmd|)
 				 default: "mkdir"
 
@@ -2482,7 +2543,7 @@
 
   *g:netrw_sort_sequence*	when sorting by name, first sort by the
 				comma-separated pattern sequence.  Note that
-				the filigree added to indicate filetypes
+				any filigree added to indicate filetypes
 				should be accounted for in your pattern.
 				 default: '[\/]$,*,\.bak$,\.o$,\.h$,
 				           \.info$,\.swp$,\.obj$'
@@ -2498,7 +2559,7 @@
 					netrwMakefile: [mM]akefile *.mak
 					netrwObj     : *.o *.obj
 					netrwTags    : tags ANmenu ANtags
-					netrwTilde   : *~
+					netrwTilde   : *
 					netrwTmp     : tmp* *tmp
 
 				These syntax highlighting groups are linked
@@ -2507,8 +2568,27 @@
 				one may put lines like >
 					hi link netrwCompress Visual
 <				into one's <.vimrc> to use one's own
-				preferences.
+				preferences.  Alternatively, one may
+				put such specifications into
+				.vim/after/syntax/netrw.vim.
 
+				As an example, I myself use a dark-background
+				colorscheme with the following in
+				.vim/after/syntax/netrw.vim: >
+
+ hi netrwCompress term=NONE cterm=NONE gui=NONE ctermfg=10 guifg=green  ctermbg=0 guibg=black
+ hi netrwData	  term=NONE cterm=NONE gui=NONE ctermfg=9 guifg=blue ctermbg=0 guibg=black
+ hi netrwHdr	  term=NONE cterm=NONE,italic gui=NONE guifg=SeaGreen1
+ hi netrwLex	  term=NONE cterm=NONE,italic gui=NONE guifg=SeaGreen1
+ hi netrwYacc	  term=NONE cterm=NONE,italic gui=NONE guifg=SeaGreen1
+ hi netrwLib	  term=NONE cterm=NONE gui=NONE ctermfg=14 guifg=yellow
+ hi netrwObj	  term=NONE cterm=NONE gui=NONE ctermfg=12 guifg=red
+ hi netrwTilde	  term=NONE cterm=NONE gui=NONE ctermfg=12 guifg=red
+ hi netrwTmp	  term=NONE cterm=NONE gui=NONE ctermfg=12 guifg=red
+ hi netrwTags	  term=NONE cterm=NONE gui=NONE ctermfg=12 guifg=red
+ hi netrwDoc	  term=NONE cterm=NONE gui=NONE ctermfg=220 ctermbg=27 guifg=yellow2 guibg=Blue3
+ hi netrwSymLink  term=NONE cterm=NONE gui=NONE ctermfg=220 ctermbg=27 guifg=grey60
+<
   *g:netrw_ssh_browse_reject*	ssh can sometimes produce unwanted lines,
 				messages, banners, and whatnot that one doesn't
 				want masquerading as "directories" and "files".
@@ -2543,6 +2623,7 @@
 				ml_get errors, try putting
 				  let g:netrw_use_noswf= 0
 				in your .vimrc.
+				  default: 1
 
   *g:netrw_winsize*		specify initial size of new windows made with
 				"o" (see |netrw-o|), "v" (see |netrw-v|),
@@ -2582,7 +2663,7 @@
 options to something that's compatible with netrw's needs, and then restoring
 them.  However, the autochdir option: >
 	:set acd
-is problematical.  Autochdir sets the current directory to that containing the
+is problematic.  Autochdir sets the current directory to that containing the
 file you edit; this apparently also applies to directories.  In other words,
 autochdir sets the current directory to that containing the "file" (even if
 that "file" is itself a directory).
@@ -2633,9 +2714,9 @@
 							*netrw-createfile*
 OPEN A NEW FILE IN NETRW'S CURRENT DIRECTORY		*netrw-%*
 
-To open a file in netrw's current directory, press "%".  This map will
-query the user for a new filename; an empty file by that name will be
-placed in the netrw's current directory (ie. b:netrw_curdir).
+To open a new file in netrw's current directory, press "%".  This map
+will query the user for a new filename; an empty file by that name will
+be placed in the netrw's current directory (ie. b:netrw_curdir).
 
 Related topics:               |netrw-d|
 
@@ -2661,6 +2742,9 @@
 	   will use only 30% of the columns available; the rest of the window
 	   is used for the preview window.
 
+Also see: |g:netrw_chgwin| |netrw-P|
+
+
 PREVIOUS WINDOW				*netrw-P* *netrw-prvwin* {{{2
 
 To edit a file or directory in the previously used (last accessed) window (see
@@ -2680,6 +2764,8 @@
    |g:netrw_preview| control horizontal vs vertical splitting
    |g:netrw_winsize| control initial sizing
 
+Also see: |g:netrw_chgwin| |netrw-p|
+
 
 REFRESHING THE LISTING			*netrw-ctrl-l* *netrw-ctrl_l* {{{2
 
@@ -2717,6 +2803,7 @@
     Note that moving files is a dangerous operation; copies are safer.  That's
     because a "move" for remote files is actually a copy + delete -- and if
     the copy fails and the delete does not, you may lose the file.
+    Use at your own risk.
 
 The g:netrw_rename_cmd variable is used to implement renaming.  By default its
 value is:
@@ -2830,7 +2917,7 @@
 
 		(taken from an answer provided by Wu Yongwei on the vim
 		mailing list)
-		I now see the problem. You code page is not 936, right? Vim
+		I now see the problem. Your code page is not 936, right? Vim
 		seems only able to open files with names that are valid in the
 		current code page, as are many other applications that do not
 		use the Unicode version of Windows APIs. This is an OS-related
@@ -3038,9 +3125,6 @@
 >
 	/usr/local/share/vim/vim7x/plugin/netrwPlugin.vim
 	/usr/local/share/vim/vim7x/autoload/netrw.vim
-< -or- >
-	/usr/local/share/vim/vim6x/plugin/netrwPlugin.vim
-	/usr/local/share/vim/vim6x/autoload/netrw.vim
 <
 which is loaded automatically at startup (assuming :set nocp).
 
@@ -3050,9 +3134,7 @@
 	   or
 	     http://vim.sourceforge.net/scripts/script.php?script_id=120
 
-	  It now comes as a "vimball"; if you're using vim 7.0 or earlier,
-	  you'll need to update vimball, too.  See
-	     http://www.drchip.org/astronaut/vim/index.html#VIMBALL
+	  Decho.vim is provided as a "vimball"; see |vimball-intro|.
 
 	2. Edit the <netrw.vim> file by typing: >
 
@@ -3082,24 +3164,73 @@
 		:w! DBG
 
 <	   Furthermore, it'd be helpful if you would type >
-		:Dsep
-<	   after each command you issue, thereby making it easier to
-	   associate which part of the debugging trace is due to which
-	   command.
+		:Dsep <command>
+<	   where <command> is the command you're about to type next,
+	   thereby making it easier to associate which part of the
+	   debugging trace is due to which command.
 
-	   Please send that information to <netrw.vim>'s maintainer, >
+	   Please send that information to <netrw.vim>'s maintainer along
+	   with the o/s you're using and vim version you're using
+	   (see |:version|) >
 		NdrOchip at ScampbellPfamily.AbizM - NOSPAM
 <
 ==============================================================================
 12. History						*netrw-history* {{{1
 
+	v151:	Jan 22, 2014	* extended :Rexplore to return to buffer
+				  prior to Explore or editing a directory
+				* (Ken Takata) netrw gave error when
+				  clipboard was disabled.  Sol'n: Placed
+				  several if has("clipboard") tests in.
+				* Fixed ftp://X@Y@Z// problem; X@Y now
+				  part of user id, and only Z is part of
+				  hostname.
+				* (A Loumiotis) reported that completion
+				  using a directory name containing spaces
+				  did not work.  Fixed with a retry in
+				  netrw#Explore() which removes the
+				  backslashes vim inserted.
+		Feb 26, 2014	* :Rexplore now records the current file
+				   using w:netrw_rexfile when returning via
+				  |:Rexplore|
+		Mar 08, 2014	* (David Kotchan) provided some patches
+				  allowing netrw to work properly with
+				  windows shares.
+				* Multiple one-liner help messages available
+				  by pressing <cr> while atop the "Quick
+				  Help" line
+				* worked on ShellCmdPost, FocusGained event
+				  handling.
+				* |:Lexplore| path: will be used to update
+				  a left-side netrw browsing directory.
+		Mar 12, 2014	* |:netrw-s-cr|: use <s-cr>  to close
+				  tree directory implemented
+		Mar 13, 2014	* (Tony Mechylynck) reported that using
+				  the browser with ftp on a directory,
+				  and selecting a gzipped txt file, that
+				  an E19 occurred (which was issued by
+				  gzip.vim).  Fixed.
+		Mar 14, 2014	* Implemented :MF and :MT (see |netrw-:MF|
+				  and |netrw-:MT|, respectively)
+		Mar 17, 2014	* |:Ntree| [dir] wasn't working properly; fixed
+		Mar 18, 2014	* Changed all uses of set to setl
+		Mar 18, 2014	* Commented the netrw_btkeep line in
+				  s:NetrwOptionSave(); the effect is that
+				  netrw buffers will remain as |'bt'|=nofile.
+				  This should prevent swapfiles being created
+				  for netrw buffers.
+		Mar 20, 2014	* Changed all uses of lcd to use s:NetrwLcd()
+				  instead.  Consistent error handling results
+				  and it also handles Window's shares
+				* Fixed |netrw-d| command when applied with ftp
+				* https: support included for netrw#NetRead()
 	v150:	Jul 12, 2013	* removed a "keepalt" to allow ":e #" to
 				  return to the netrw directory listing
 		Jul 13, 2013	* (Jonas Diemer) suggested changing
 				  a <cWORD> to <cfile>.
 		Jul 21, 2013	* (Yuri Kanivetsky) reported that netrw's
 				  use of mkdir did not produce directories
-				  following umask.
+				  following the user's umask.
 		Aug 27, 2013	* introduced |g:netrw_altfile| option
 		Sep 05, 2013	* s:Strlen() now uses |strdisplaywidth()|
 				  when available, by default
diff --git a/runtime/doc/quickfix.txt b/runtime/doc/quickfix.txt
index f82dd1f..71db326 100644
--- a/runtime/doc/quickfix.txt
+++ b/runtime/doc/quickfix.txt
@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 7.4.  Last change: 2013 Aug 03
+*quickfix.txt*  For Vim version 7.4.  Last change: 2014 Mar 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -202,7 +202,7 @@
 			the current window is used instead of the quickfix
 			list.
 
-							*:caddb* *:caddbuffer*
+							*:cad* *:caddbuffer*
 :caddb[uffer] [bufnr]	Read the error list from the current buffer and add
 			the errors to the current quickfix list.  If a
 			quickfix list is not present, then a new list is
@@ -240,7 +240,7 @@
 :lgete[xpr] {expr}	Same as |:cgetexpr|, except the location list for the
 			current window is used instead of the quickfix list.
 
-							*:cad* *:caddexpr*
+							*:cadde* *:caddexpr*
 :cad[dexpr] {expr}	Evaluate {expr} and add the resulting lines to the
 			current quickfix list. If a quickfix list is not
 			present, then a new list is created. The current
diff --git a/runtime/doc/tags b/runtime/doc/tags
index bf1c7c1..6b5911d 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -1973,8 +1973,8 @@
 :cabc	map.txt	/*:cabc*
 :cabclear	map.txt	/*:cabclear*
 :cad	quickfix.txt	/*:cad*
-:caddb	quickfix.txt	/*:caddb*
 :caddbuffer	quickfix.txt	/*:caddbuffer*
+:cadde	quickfix.txt	/*:cadde*
 :caddexpr	quickfix.txt	/*:caddexpr*
 :caddf	quickfix.txt	/*:caddf*
 :caddfile	quickfix.txt	/*:caddfile*
@@ -2500,6 +2500,7 @@
 :nbkey	netbeans.txt	/*:nbkey*
 :nbstart	netbeans.txt	/*:nbstart*
 :ne	editing.txt	/*:ne*
+:netrw-s-cr	pi_netrw.txt	/*:netrw-s-cr*
 :new	windows.txt	/*:new*
 :next	editing.txt	/*:next*
 :next_f	editing.txt	/*:next_f*
@@ -6942,6 +6943,15 @@
 netrw	pi_netrw.txt	/*netrw*
 netrw-%	pi_netrw.txt	/*netrw-%*
 netrw--	pi_netrw.txt	/*netrw--*
+netrw-:Explore	pi_netrw.txt	/*netrw-:Explore*
+netrw-:Hexplore	pi_netrw.txt	/*netrw-:Hexplore*
+netrw-:Lexplore	pi_netrw.txt	/*netrw-:Lexplore*
+netrw-:MF	pi_netrw.txt	/*netrw-:MF*
+netrw-:MT	pi_netrw.txt	/*netrw-:MT*
+netrw-:Rexplore	pi_netrw.txt	/*netrw-:Rexplore*
+netrw-:Sexplore	pi_netrw.txt	/*netrw-:Sexplore*
+netrw-:Texplore	pi_netrw.txt	/*netrw-:Texplore*
+netrw-:Vexplore	pi_netrw.txt	/*netrw-:Vexplore*
 netrw-C	pi_netrw.txt	/*netrw-C*
 netrw-D	pi_netrw.txt	/*netrw-D*
 netrw-O	pi_netrw.txt	/*netrw-O*
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index c2da326..6fb67df 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 7.4.  Last change: 2014 Mar 08
+*todo.txt*      For Vim version 7.4.  Last change: 2014 Mar 22
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -54,55 +54,38 @@
 Problem that a previous silent ":throw" causes a following try/catch not to
 work. (ZyX, 2013 Sep 28)
 
-Patch for VMS. (Zoltan Arpadffy, 2014 Mar 6)
-
-Euphoria syntax, Shian Lee, Feb 27
-
 ":cd C:\Windows\System32\drivers\etc*" does not work, even though the
 directory exists. (Sergio Gallelli, 2013 Dec 29)
 
-Problem using ":try" inside ":execute". (ZyX, 2013 Sep 15)
+It is possible to define a function with a colon in the name.
+"g:" is not recognized as it should.  (zyx, 2014 Mar 16)
+Do some plugins use names with a colon?  Disallow it, but ignore the error
+when an option is set?
 
-Can't build Vim with Perl when -Dusethreads is not specified for building
-perl, and building with --enable-perlinterp=dynamic.
-Patch by Yasuhiro Matsumoto, 2014 Feb 24.
+":lunmap" cannot be abbrevated to ":lu". (ZyX)
+
+Problem using ":try" inside ":execute". (ZyX, 2013 Sep 15)
 
 Update for Clojure ftplugin. (Sung Pae).  Await discussion about formatting in
 ftplugins.
 
-Update for phpcomplete.vim. (Complex, 2014 Mar 1)
-
 Python: ":py raw_input('prompt')" doesn't work. (Manu Hack)
 
+Patch to add :noswapfile modifier. (Christian Brabandt, 2014 Mar 13)
+
+Patch to make ":sp {current-buffer-name}" not reload the buffer.
+(Christian Brabandt, 2013 Mar 13)
+
+Patch for quickfix window resizing.  Issue 199.  (Christian Brabandt)
+
 Using autoconf 2.69 gives a lot of warnings.
 
-Patch to allow for negative index in string. (LCD, 2014 Feb 13)
-Feb 14 with test. Or does this intentionally not work?
-
-Issue 197: ]P doesn't paste over Visual selection.  With patch from Christian
-Brabandt, Feb 6.  Issue 197.
-
-Make 'lispwords' global-local. (Sung Pae, 2014 Feb 16)
-
 Problem with 'spellsuggest' file, only works for some words.
 (Cesar Romani, 2013 Aug 20)  Depends on file name? (Aug 24)
 Additional remark by glts: the suggested words are marked bad?
 
-8   non-ASCII font names don't work.  Need to convert from 'encoding' and use
-    the wide functions. Patch by Ken Takata, 2013 Dec 22.
-    Update 2014 Jan 6.
-
 Syntax highlighting slow (hangs) in SASS file. (Niek Bosch, 2013 Aug 21)
 
-Problem with 'errorformat'.  Patch by Lcd, 2014 Feb 21. With test.
-
-Patch for the problem that a mapping where the second byte is 0x80 isn't
-handled correcly. (Nobuhiro Takasaki, 2014 Feb 11)
-Update 2014 Mar 8.
-
-Patch for mksession. (Nobuhiro Takasaki, 2014 Jan 31)
-Also fixes another problem (following email)
-
 Patch to use rubyarchhdrdir for Ruby 2.x. (James McCoy, 2014 Feb 24)
 
 Dynamic Ruby linking issues.  Patch by Danek Duvall (2014 Feb 26)
@@ -128,6 +111,10 @@
 
 Issue 174: Detect Mason files.
 
+No error for missing endwhile. (ZyX, 2014 Mar 20)
+
+Patch to add v:progpath. (Viktor Kojouharov, 2014 Mar 15)
+
 Phpcomplete.vim update. (Complex, 2014 Jan 15)
 
 PHP syntax is extremely slow. (Anhad Jai Singh, 2014 Jan 19)
@@ -135,6 +122,11 @@
 Can we make ":unlet $VAR" use unsetenv() to delete the env var?
 What for systems that don't have unsetenv()?
 
+This does not give an error: (Andre Sihera, 2014 Mar 21)
+    vim -u NONE 1 2 3 -c 'bufdo if 1 | echo 1'
+This neither: (ZyX)
+    vim -u NONE 1 2 3 -c 'bufdo while 1 | echo 1'
+
 spec ftplugin: patch from Igor Gnatenko, 2014 Jan 26.
 Include if maintainers don't respond.
 
@@ -165,6 +157,9 @@
 
 Patch to define macros for hardcoded values. (Elias Diem, 2013 Dec 14)
 
+Patch to add sortuniq(). (Cade Forester, 2014 Mar 19)
+Or add uniq() instead?
+
 Perl: support for Activestate perl 5.18: Issue 170.
 
 Several syntax file match "^\s*" which may get underlined if that's in the
@@ -175,6 +170,9 @@
 
 Go through more coverity reports.
 
+Patch to add ":undorecover", get as much text out of the undo file as
+possible. (Christian Brabandt, 2014 Mar 12)
+
 Include Haiku port? (Adrien Destugues, Siarzhuk Zharski, 2013 Oct 24)
 
 Updated spec ftplugin. (Matěj Cepl, 2013 Oct 16)
@@ -190,7 +188,7 @@
 2013 Sep 5)
 
 Patch to add "ntab" item in 'listchars' to repeat first character. (Nathaniel
-Braun, pragm, 2013 Oct 13)  Again 2014 Mar 5.
+Braun, pragm, 2013 Oct 13)  A better solution 2014 Mar 5.
 
 Undo message is not always properly displayed.  Patch by Ken Takata, 2013 oct
 3.  Doesn't work properly according to Yukihiro Nakadaira.
@@ -2768,8 +2766,6 @@
     input method called from GDK code.  Without Perl it doesn't crash.
 -   VMS: Vimdiff doesn't work with the VMS diff, because the output looks
     different.  This makes test 47 fail.  Install a Unix-compatible diff.
--   VMS v7.1 and older: Tests 21 and 32 fail.  From VMS v7.1-2 and newer Vim
-    does not have this behavior. (Zoltan Arpadffy)
 -   Win32 GUI: mouse wheel always scrolls rightmost window.  The events arrive
     in Vim as if the rightmost scrollbar was used.
 -   GTK with Gnome: Produces an error message when starting up:
@@ -4234,8 +4230,7 @@
 7   Use Tabs for the indent of starting lines, pad with spaces for
     continuation lines.  Allows changing 'tabstop' without messing up the
     indents.
-    'keeptabs': when set don't change the tabs and spaces used for indent,
-    when the indent remains the same or increases.
+    Patch by Lech Lorens, 2010 Mar.  Update by James McCoy, 2014 Mar 15.
 
 
 Java: