Update runtime files
diff --git a/runtime/doc/builtin.txt b/runtime/doc/builtin.txt
index 4a05fdc..8030011 100644
--- a/runtime/doc/builtin.txt
+++ b/runtime/doc/builtin.txt
@@ -1,4 +1,4 @@
-*builtin.txt* For Vim version 9.0. Last change: 2022 Sep 10
+*builtin.txt* For Vim version 9.0. Last change: 2022 Sep 17
VIM REFERENCE MANUAL by Bram Moolenaar
diff --git a/runtime/doc/change.txt b/runtime/doc/change.txt
index 5ac2f63..a51dadb 100644
--- a/runtime/doc/change.txt
+++ b/runtime/doc/change.txt
@@ -1,4 +1,4 @@
-*change.txt* For Vim version 9.0. Last change: 2022 May 26
+*change.txt* For Vim version 9.0. Last change: 2022 Sep 13
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -1188,11 +1188,20 @@
the text to copy, Visually select the text to replace and use "0p . You can
repeat this as many times as you like, and the unnamed register will be
changed each time.
-
-When you use a blockwise Visual mode command and yank only a single line into
-a register, a paste on a visual selected area will paste that single line on
-each of the selected lines (thus replacing the blockwise selected region by a
-block of the pasted line).
+ *blockwise-put*
+When a register contains text from one line (characterwise), using a
+blockwise Visual selection, putting that register will paste that text
+repeatedly in each of the selected lines, thus replacing the blockwise
+selected region by multiple copies of the register text. For example:
+ - yank the word "TEXT" into a register with `yw`
+ - select a visual block, marked with "v" in this text:
+ aaavvaaa
+ bbbvvbbb
+ cccvvccc
+ - press `p`, results in:
+ aaaTEXTaaa
+ bbbTEXTbbb
+ cccTEXTccc
*blockwise-register*
If you use a blockwise Visual mode command to get the text into the register,
diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt
index 145d3bd..fe75169 100644
--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -1,4 +1,4 @@
-*eval.txt* For Vim version 9.0. Last change: 2022 Sep 09
+*eval.txt* For Vim version 9.0. Last change: 2022 Sep 17
VIM REFERENCE MANUAL by Bram Moolenaar
diff --git a/runtime/doc/intro.txt b/runtime/doc/intro.txt
index 6904091..7813177 100644
--- a/runtime/doc/intro.txt
+++ b/runtime/doc/intro.txt
@@ -1,4 +1,4 @@
-*intro.txt* For Vim version 9.0. Last change: 2022 Apr 03
+*intro.txt* For Vim version 9.0. Last change: 2022 Sep 12
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -533,6 +533,10 @@
'>' characters. This does NOT work for other commands, like ":set" and
":autocmd"!
+The notation can be used in a double quoted strings, using "\<" at the start,
+e.g. "\<C-Space>". This results in a special key code. To convert this back
+to readable text use `keytrans()`.
+
==============================================================================
5. Modes, introduction *vim-modes-intro* *vim-modes*
diff --git a/runtime/doc/map.txt b/runtime/doc/map.txt
index 6beae6e..f1bfd75 100644
--- a/runtime/doc/map.txt
+++ b/runtime/doc/map.txt
@@ -1,4 +1,4 @@
-*map.txt* For Vim version 9.0. Last change: 2022 Jun 18
+*map.txt* For Vim version 9.0. Last change: 2022 Sep 12
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -1583,7 +1583,7 @@
For the "custom" argument, the function should return the completion
candidates one per line in a newline separated string.
-
+ *E1303*
For the "customlist" argument, the function should return the completion
candidates as a Vim List. Non-string items in the list are ignored.
diff --git a/runtime/doc/mlang.txt b/runtime/doc/mlang.txt
index 724ec46..8997e1c 100644
--- a/runtime/doc/mlang.txt
+++ b/runtime/doc/mlang.txt
@@ -1,4 +1,4 @@
-*mlang.txt* For Vim version 9.0. Last change: 2020 Aug 15
+*mlang.txt* For Vim version 9.0. Last change: 2022 Sep 17
VIM REFERENCE MANUAL by Bram Moolenaar
diff --git a/runtime/doc/os_win32.txt b/runtime/doc/os_win32.txt
index 10dcdf4..e72ecc8 100644
--- a/runtime/doc/os_win32.txt
+++ b/runtime/doc/os_win32.txt
@@ -1,4 +1,4 @@
-*os_win32.txt* For Vim version 9.0. Last change: 2022 May 24
+*os_win32.txt* For Vim version 9.0. Last change: 2022 Sep 18
VIM REFERENCE MANUAL by George Reilly
diff --git a/runtime/doc/quickref.txt b/runtime/doc/quickref.txt
index 2cc2358..b309091 100644
--- a/runtime/doc/quickref.txt
+++ b/runtime/doc/quickref.txt
@@ -1,4 +1,4 @@
-*quickref.txt* For Vim version 9.0. Last change: 2022 May 05
+*quickref.txt* For Vim version 9.0. Last change: 2022 Sep 14
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -919,7 +919,7 @@
'spellsuggest' 'sps' method(s) used to suggest spelling corrections
'splitbelow' 'sb' new window from split is below the current one
'splitright' 'spr' new window is put right of the current one
-'splitscroll' 'spsc' determines scroll behavior when splitting windows
+'splitscroll' 'spsc' determines scroll behavior for split windows
'startofline' 'sol' commands move cursor to first non-blank in line
'statusline' 'stl' custom format for the status line
'suffixes' 'su' suffixes that are ignored with multiple match
diff --git a/runtime/doc/spell.txt b/runtime/doc/spell.txt
index f15d3b1..024f265 100644
--- a/runtime/doc/spell.txt
+++ b/runtime/doc/spell.txt
@@ -1600,7 +1600,7 @@
Forbid three identical characters when compounding. Not
supported.
-CHECKSHARPS (Hunspell)) *spell-CHECKSHARPS*
+CHECKSHARPS (Hunspell) *spell-CHECKSHARPS*
SS letter pair in uppercased (German) words may be upper case
sharp s (ß). Not supported.
diff --git a/runtime/doc/tags b/runtime/doc/tags
index b38f1cc..1fdc74f 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -718,7 +718,9 @@
'nospell' options.txt /*'nospell'*
'nosplitbelow' options.txt /*'nosplitbelow'*
'nosplitright' options.txt /*'nosplitright'*
+'nosplitscroll' options.txt /*'nosplitscroll'*
'nospr' options.txt /*'nospr'*
+'nospsc' options.txt /*'nospsc'*
'nosr' options.txt /*'nosr'*
'nossl' options.txt /*'nossl'*
'nosta' options.txt /*'nosta'*
@@ -952,9 +954,11 @@
'spl' options.txt /*'spl'*
'splitbelow' options.txt /*'splitbelow'*
'splitright' options.txt /*'splitright'*
+'splitscroll' options.txt /*'splitscroll'*
'spo' options.txt /*'spo'*
'spr' options.txt /*'spr'*
'sps' options.txt /*'sps'*
+'spsc' options.txt /*'spsc'*
'sr' options.txt /*'sr'*
'srr' options.txt /*'srr'*
'ss' options.txt /*'ss'*
@@ -4087,7 +4091,6 @@
E1073 vim9.txt /*E1073*
E1074 vim9.txt /*E1074*
E1075 vim9.txt /*E1075*
-E1076 eval.txt /*E1076*
E1077 vim9.txt /*E1077*
E1078 autocmd.txt /*E1078*
E1079 vim9.txt /*E1079*
@@ -4335,7 +4338,11 @@
E1299 tagsrch.txt /*E1299*
E13 message.txt /*E13*
E1300 userfunc.txt /*E1300*
+E1301 vim9.txt /*E1301*
E1302 eval.txt /*E1302*
+E1303 map.txt /*E1303*
+E1304 vim9.txt /*E1304*
+E1305 textprop.txt /*E1305*
E131 userfunc.txt /*E131*
E132 userfunc.txt /*E132*
E133 userfunc.txt /*E133*
@@ -5922,6 +5929,7 @@
blob2list() builtin.txt /*blob2list()*
blockwise-examples visual.txt /*blockwise-examples*
blockwise-operators visual.txt /*blockwise-operators*
+blockwise-put change.txt /*blockwise-put*
blockwise-register change.txt /*blockwise-register*
blockwise-visual visual.txt /*blockwise-visual*
blowfish options.txt /*blowfish*
@@ -8122,6 +8130,7 @@
keypad-plus intro.txt /*keypad-plus*
keypad-point intro.txt /*keypad-point*
keys() builtin.txt /*keys()*
+keytrans() builtin.txt /*keytrans()*
known-bugs todo.txt /*known-bugs*
l motion.txt /*l*
l: eval.txt /*l:*
@@ -10714,6 +10723,7 @@
vim9-mix vim9.txt /*vim9-mix*
vim9-namespace vim9.txt /*vim9-namespace*
vim9-no-dict-function vim9.txt /*vim9-no-dict-function*
+vim9-no-shorten vim9.txt /*vim9-no-shorten*
vim9-rationale vim9.txt /*vim9-rationale*
vim9-reload vim9.txt /*vim9-reload*
vim9-s-namespace vim9.txt /*vim9-s-namespace*
diff --git a/runtime/doc/textprop.txt b/runtime/doc/textprop.txt
index 8d7c0ec..5fb53af 100644
--- a/runtime/doc/textprop.txt
+++ b/runtime/doc/textprop.txt
@@ -1,4 +1,4 @@
-*textprop.txt* For Vim version 9.0. Last change: 2021 Nov 23
+*textprop.txt* For Vim version 9.0. Last change: 2022 Sep 17
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -142,9 +142,11 @@
then "id" must not be present and will be set
automatically to a negative number; otherwise
zero is used
+ *E1305*
text text to be displayed before {col}, or after the
line if {col} is zero; prepend and/or append
- spaces for padding with highlighting
+ spaces for padding with highlighting; cannot
+ be used with "length", "end_lnum" and "end_col"
*E1294*
text_align when "text" is present and {col} is zero;
specifies where to display the text:
@@ -156,7 +158,7 @@
above just above the line
When omitted "after" is used. Only one
"right" property can fit in each line, if
- there are two ore more these will go in a
+ there are two or more these will go in a
separate line (still right aligned).
text_padding_left *E1296*
used when "text" is present and {col} is zero;
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index b22c256..864f0b2 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt* For Vim version 9.0. Last change: 2022 Sep 10
+*todo.txt* For Vim version 9.0. Last change: 2022 Sep 18
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -38,6 +38,39 @@
*known-bugs*
-------------------- Known bugs and current work -----------------------
+Closure created in for loop can use loop variable? #11094
+ Nested loops do not work correctly yet.
+ Would need to save vars for each block separately.
+
+Virtual text:
+- Virtual text below: padding is highlighted when 'number' is set #11138
+- Virtual text above: do not highlight until end of line? #11138
+- 'number' should be below "above" virtual text? Might be difficult to
+ implement.
+- Add highlight for the gap before/after virtual text above/below?
+- option to hide virtual text?
+
+Fail with valgrind: test_edit
+Found errors in Test_edit_insertmode_ex_edit():
+ Run 1, 01:19:51 - 01:20:01:
+ command line..script /home/mool/vim/vim90/src/testdir/runtest.vim[469]..function RunTheTest[44]..Test_edit_insertmode_ex_edit[13]..WaitForAssert[2]..<SNR>6_WaitForCommon[11]..<lambda>4 line 1: Pattern '^-- INSERT --\\s*$' does not match ''
+
+From test_global
+ Found errors in Test_interrupt_global():
+ Run 1, 02:16:22 - 02:16:27:
+ command line..script /home/mool/vim/vim90/src/testdir/runtest.vim[469]..function RunTheTest[44]..Test_interrupt_global[13]..WaitForAssert[2]..<SNR>7_WaitForCommon[11]..<lambda>20 line 1: Pattern 'Interrupted' does not match 'Type :qa! and press...l changes and exit Vim 1,1 All'
+ command line..script /home/mool/vim/vim90/src/testdir/runtest.vim[469]..function RunTheTest[44]..Test_interrupt_global[20]..WaitForAssert[2]..<SNR>7_WaitForCommon[11]..<lambda>21 line 1: Pattern 'Interrupted' does not match 'Entering Ex mode. Type "visual" to go to Normal mode.'
+
+test_terminal3:
+Conditional jump or move depends on uninitialised value(s)
+==2819005== at 0x2E9134: jump_to_mouse (mouse.c:2015)
+==2819005== by 0x2E69E6: do_mouse (mouse.c:702)
+==2819005== by 0x2E95C2: nv_mouse (mouse.c:2166)
+
+option_set(): "get a bit too much"
+ - refactor to separate function
+ - check for empty result
+
Use :defer command:
- Use "D" flag of writefile() and mkdir() in tests.
(testdir/test_c*.vim done)
@@ -45,7 +78,7 @@
When using :echomessage do use msg_row and msg_col, but save and restore.
How to test any failure? If nothing fails perhaps it's OK alrady.
-Drop Windows XP? #11089
+New Vim indent script: #11079 Not done yet.
Further Vim9 improvements, possibly after launch:
- Use Vim9 for more runtime files.
@@ -185,8 +218,6 @@
- When 'encoding' is not utf-8, or the job is using another encoding, setup
conversions.
-Add 'splitscroll' #10682 Anything remaining
-
Autoconf: must use autoconf 2.69, later version generates lots of warnings
- try using autoconf 2.71 and fix all "obsolete" warnings
@@ -197,6 +228,13 @@
Add BufDeletePost. #11041
+Add a string to the 'display' option ("smoothscroll" ?) to make CTRL-E and
+CTRL-Y scroll one screen line, also if this means the first line doesn't start
+with the first character (like what happens with a last line that doesn't
+fit). Display "<<<" at the start of the first visible line (like "@@@" is
+displayed in the last line). (Arseny Nasokin, #5154)
+Neovim PR: https://github.com/neovim/neovim/pull/11014
+
NFA regexp does not handle composing characters well: #10286
[ɔ̃] matches both ɔ and ɔ̃
\(ɔ\|ɔ̃\) matches ɔ and not ɔ̃
@@ -556,12 +594,6 @@
read with "-s scriptin" expects escape codes. Probably "scriptout" needs to
be adjusted. (Daniel Steinberg, 2019 Feb 24, #4041)
-Add a string to the 'display' option ("smoothscroll" ?) to make CTRL-E and
-CTRL-Y scroll one screen line, also if this means the first line doesn't start
-with the first character (like what happens with a last line that doesn't
-fit). Display "<<<" at the start of the first visible line (like "@@@" is
-displayed in the last line). (Arseny Nasokin, #5154)
-
Window size changes after closing a tab. (#4741)
Problem with colors in terminal window. (Jason Franklin, 2019 May 12)
diff --git a/runtime/doc/userfunc.txt b/runtime/doc/userfunc.txt
index 24e3fd7..806d8f7 100644
--- a/runtime/doc/userfunc.txt
+++ b/runtime/doc/userfunc.txt
@@ -15,7 +15,7 @@
==============================================================================
-1. Defining a fuction ~
+1. Defining a function ~
*define-function*
New functions can be defined. These can be called just like builtin
functions. The function executes a sequence of Ex commands. Normal mode
@@ -308,7 +308,7 @@
<
==============================================================================
-2. Calling a fuction ~
+2. Calling a function ~
*:cal* *:call* *E107*
:[range]cal[l] {name}([arguments])
Call a function. The name of the function and its arguments
diff --git a/runtime/doc/various.txt b/runtime/doc/various.txt
index 6e4afec..fa4ad07 100644
--- a/runtime/doc/various.txt
+++ b/runtime/doc/various.txt
@@ -1,4 +1,4 @@
-*various.txt* For Vim version 9.0. Last change: 2022 Jun 25
+*various.txt* For Vim version 9.0. Last change: 2022 Sep 17
VIM REFERENCE MANUAL by Bram Moolenaar
diff --git a/runtime/doc/vim9.txt b/runtime/doc/vim9.txt
index ce9cbdf..2a953ee 100644
--- a/runtime/doc/vim9.txt
+++ b/runtime/doc/vim9.txt
@@ -1,4 +1,4 @@
-*vim9.txt* For Vim version 9.0. Last change: 2022 Sep 10
+*vim9.txt* For Vim version 9.0. Last change: 2022 Sep 15
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -107,7 +107,7 @@
`:t`
`:xit`
- Some commands, especially those used for flow control, cannot be shortened.
- E.g., `:throw` cannot be written as `:th`.
+ E.g., `:throw` cannot be written as `:th`. *vim9-no-shorten*
- You cannot use curly-braces names.
- A range before a command must be prefixed with a colon: >
:%s/this/that
@@ -1336,16 +1336,15 @@
})
endfor
-You need to create a closure to store the current value of "n", so that it is
-evaluated at the time the closure is created: >
- def GetClosure(nr: number): func
- return (_) => {
- echowindow nr
- }
- enddef
-
+You need to use a block and define a variable there, and use that one in the
+closure: >
for n in range(4)
- timer_start(500 * n, GetClosure(n))
+ {
+ var nr = n
+ timer_start(500 * n, (_) => {
+ echowin nr
+ })
+ }
endfor
Using `echowindow` is useful in a timer, the messages go into a popup and will
@@ -1684,7 +1683,7 @@
In Vim9 script the global "g:" namespace can still be used as before. And the
"w:", "b:" and "t:" namespaces. These have in common that variables are not
-declared and they can be deleted.
+declared, have no specific type and they can be deleted. *E1304*
A side effect of `:vim9script` is that the 'cpoptions' option is set to the
Vim default value, like with: >
@@ -1825,7 +1824,7 @@
import "otherfile.vim9script" as that
call s:that.OtherFunc()
-However, the namespace cannot be resolved on it's own: >
+However, the namespace cannot be resolved on its own: >
import "that.vim"
echo s:that
" ERROR: E1060: Expected dot after name: s:that