diff --git a/runtime/doc/diff.txt b/runtime/doc/diff.txt
index 566411a..62201d4 100644
--- a/runtime/doc/diff.txt
+++ b/runtime/doc/diff.txt
@@ -1,4 +1,4 @@
-*diff.txt*      For Vim version 8.2.  Last change: 2019 Nov 10
+*diff.txt*      For Vim version 8.2.  Last change: 2021 Feb 10
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt
index 0773b24..03fcb65 100644
--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 8.2.  Last change: 2021 Jan 31
+*eval.txt*	For Vim version 8.2.  Last change: 2021 Feb 10
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -5903,6 +5903,7 @@
 		When the register was not set an empty list is returned.
 
 		If {regname} is not specified, |v:register| is used.
+		In |Vim9-script| {regname} must be one character.
 
 		Can also be used as a |method|: >
 			GetRegname()->getreg()
@@ -5930,6 +5931,7 @@
 		will be returned.
 		If {regname} is not specified, |v:register| is used.
 		The returned Dictionary can be passed to |setreg()|.
+		In |Vim9-script| {regname} must be one character.
 
 		Can also be used as a |method|: >
 			GetRegname()->getreginfo()
@@ -5943,6 +5945,7 @@
 		    ""			for an empty or unknown register
 		<CTRL-V> is one character with value 0x16.
 		If {regname} is not specified, |v:register| is used.
+		In |Vim9-script| {regname} must be one character.
 
 		Can also be used as a |method|: >
 			GetRegname()->getregtype()
@@ -9658,6 +9661,7 @@
 setreg({regname}, {value} [, {options}])
 		Set the register {regname} to {value}.
 		If {regname} is "" or "@", the unnamed register '"' is used.
+		In |Vim9-script| {regname} must be one character.
 
 		{value} may be any value returned by |getreg()| or
 		|getreginfo()|, including a |List| or |Dict|.
diff --git a/runtime/doc/indent.txt b/runtime/doc/indent.txt
index 87d5c0b..6a2dd51 100644
--- a/runtime/doc/indent.txt
+++ b/runtime/doc/indent.txt
@@ -610,14 +610,14 @@
 These conventions are not universally followed, so the Clojure indent script
 offers a few configurable options, listed below.
 
-If the current vim does not include |searchpairpos()|, the indent script falls
+If the current vim does not include searchpairpos(), the indent script falls
 back to normal 'lisp' indenting, and the following options are ignored.
 
 							*g:clojure_maxlines*
 
-Set maximum scan distance of |searchpairpos()|. Larger values trade
-performance for correctness when dealing with very long forms. A value of 0
-will scan without limits.
+Set maximum scan distance of searchpairpos(). Larger values trade performance
+for correctness when dealing with very long forms. A value of 0 will scan
+without limits.
 >
 	" Default
 	let g:clojure_maxlines = 100
diff --git a/runtime/doc/index.txt b/runtime/doc/index.txt
index e5d29ad..2d96769 100644
--- a/runtime/doc/index.txt
+++ b/runtime/doc/index.txt
@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 8.2.  Last change: 2021 Jan 15
+*index.txt*     For Vim version 8.2.  Last change: 2021 Feb 11
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1176,6 +1176,7 @@
 |:bNext|	:bN[ext]	go to previous buffer in the buffer list
 |:ball|		:ba[ll]		open a window for each buffer in the buffer list
 |:badd|		:bad[d]		add buffer to the buffer list
+|:balt|		:balt		like ":badd" but also set the alternate file
 |:bdelete|	:bd[elete]	remove a buffer from the buffer list
 |:behave|	:be[have]	set mouse and selection behavior
 |:belowright|	:bel[owright]	make split window appear right or below
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index f25b1ba..ee5ee26 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 8.2.  Last change: 2021 Jan 08
+*options.txt*	For Vim version 8.2.  Last change: 2021 Feb 13
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -1568,7 +1568,11 @@
 			{only in GUI versions or when the |+xterm_clipboard|
 			feature is included}
 	This option is a list of comma separated names.
-	These names are recognized:
+	Note: if one of the items is "exclude:", then you can't add an item
+	after that.  Therefore do append an item with += but use ^= to
+	prepend, e.g.: >
+		set clipboard^=unnamed
+<	These names are recognized:
 
 						*clipboard-unnamed*
 	unnamed		When included, Vim will use the clipboard register '*'
@@ -4882,8 +4886,10 @@
 							*lcs-lead*
 	  lead:c	Character to show for leading spaces.  When omitted,
 			leading spaces are blank.  Overrides the "space"
-			setting for leading spaces.
-							*lcs-trail*
+			setting for leading spaces.  You can combine it with
+			"tab:", for example: >
+				:set listchars+=tab:>-,lead:.
+<							*lcs-trail*
 	  trail:c	Character to show for trailing spaces.  When omitted,
 			trailing spaces are blank.  Overrides the "space"
 			setting for trailing spaces.
@@ -6232,7 +6238,7 @@
 <
 				*'runtimepath'* *'rtp'* *vimfiles*
 'runtimepath' 'rtp'	string	(default:
-					Unix: "$HOME/.vim,
+					Unix:  "$HOME/.vim,
 						$VIM/vimfiles,
 						$VIMRUNTIME,
 						$VIM/vimfiles/after,
@@ -6242,7 +6248,7 @@
 						$VIMRUNTIME,
 						$VIM/vimfiles/after,
 						home:vimfiles/after"
-					PC:    "$HOME/vimfiles,
+					MS-Windows: "$HOME/vimfiles,
 						$VIM/vimfiles,
 						$VIMRUNTIME,
 						$VIM/vimfiles/after,
@@ -6254,8 +6260,8 @@
 						$VIM/vimfiles,
 						$VIMRUNTIME,
 						$VIM/vimfiles/after,
-						$BE_USER_SETTINGS/vim/after")
-					VMS: "sys$login:vimfiles,
+						$BE_USER_SETTINGS/vim/after"
+					VMS:   "sys$login:vimfiles,
 						$VIM/vimfiles,
 						$VIMRUNTIME,
 						$VIM/vimfiles/after,
diff --git a/runtime/doc/popup.txt b/runtime/doc/popup.txt
index 6d70cec..e7209c4 100644
--- a/runtime/doc/popup.txt
+++ b/runtime/doc/popup.txt
@@ -1,4 +1,4 @@
-*popup.txt*  For Vim version 8.2.  Last change: 2021 Jan 21
+*popup.txt*  For Vim version 8.2.  Last change: 2021 Feb 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -620,7 +620,8 @@
 			property moves.  Use an empty string to remove.  See
 			|popup-textprop-pos|.
 	textpropwin	What window to search for the text property.  When
-			omitted or invalid the current window is used.
+			omitted or invalid the current window is used.  Used
+			when "textprop" is present.
 	textpropid	Used to identify the text property when "textprop" is
 			present. Use zero to reset.
 	fixed		When FALSE (the default), and:
diff --git a/runtime/doc/quickfix.txt b/runtime/doc/quickfix.txt
index b8ad858..2f34f49 100644
--- a/runtime/doc/quickfix.txt
+++ b/runtime/doc/quickfix.txt
@@ -1,4 +1,4 @@
-*quickfix.txt*  For Vim version 8.2.  Last change: 2020 May 31
+*quickfix.txt*  For Vim version 8.2.  Last change: 2021 Feb 05
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1025,6 +1025,12 @@
 			'smartcase' is not used.
 			If {pattern} is empty (e.g. // is specified), the last
 			used search pattern is used. |last-pattern|
+
+			|QuickFixCmdPre| and |QuickFixCmdPost| are triggered.
+			A file that is opened for matching may use a buffer
+			number, but it is reused if possible to avoid
+			consuming buffer numbers.
+
 :{count}vim[grep] ...
 			When a number is put before the command this is used
 			as the maximum number of matches to find.  Use
diff --git a/runtime/doc/starting.txt b/runtime/doc/starting.txt
index 971181c..e492c89 100644
--- a/runtime/doc/starting.txt
+++ b/runtime/doc/starting.txt
@@ -1,4 +1,4 @@
-*starting.txt*  For Vim version 8.2.  Last change: 2020 Dec 19
+*starting.txt*  For Vim version 8.2.  Last change: 2021 Feb 10
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1344,7 +1344,11 @@
    "options".  Script-local mappings will not be written.
 2. Restores global variables that start with an uppercase letter and contain
    at least one lowercase letter, if 'sessionoptions' contains "globals".
-3. Unloads all currently loaded buffers.
+3. Closes all windows in the current tab page, except the current one; closes
+   all tab pages except the current one (this results in currently loaded
+   buffers to be unloaded, some may become hidden if 'hidden' is set or
+   otherwise specified); wipes out the current buffer, if it is empty
+   and unnamed.
 4. Restores the current directory if 'sessionoptions' contains "curdir", or
    sets the current directory to where the Session file is if 'sessionoptions'
    contains "sesdir".
@@ -1640,13 +1644,17 @@
 most of the information will be restored).
 
 						   *:rv* *:rviminfo* *E195*
-:rv[iminfo][!] [file]	Read from viminfo file [file] (default: see above).
+:rv[iminfo][!] [file]	Read from viminfo file [file] (default: see
+			|viminfo-file-name| above).
 			If [!] is given, then any information that is
 			already set (registers, marks, |v:oldfiles|, etc.)
 			will be overwritten
 
 			*:wv* *:wviminfo* *E137* *E138* *E574* *E886* *E929*
-:wv[iminfo][!] [file]	Write to viminfo file [file] (default: see above).
+:wv[iminfo][!] [file]	Write to viminfo file [file] (default: see
+			|viminfo-file-name| above).
+			This command has no effect when 'viminfofile' has been
+			set to "NONE".
 			The information in the file is first read in to make
 			a merge between old and new info.  When [!] is used,
 			the old information is not read first, only the
diff --git a/runtime/doc/tags b/runtime/doc/tags
index 83ccca2..9d3c9aa 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -1292,6 +1292,7 @@
 +cmdline_compl	various.txt	/*+cmdline_compl*
 +cmdline_hist	various.txt	/*+cmdline_hist*
 +cmdline_info	various.txt	/*+cmdline_info*
++cmdwin	various.txt	/*+cmdwin*
 +comments	various.txt	/*+comments*
 +conceal	various.txt	/*+conceal*
 +cryptv	various.txt	/*+cryptv*
@@ -3943,6 +3944,7 @@
 E1137	map.txt	/*E1137*
 E114	eval.txt	/*E114*
 E115	eval.txt	/*E115*
+E1155	autocmd.txt	/*E1155*
 E116	eval.txt	/*E116*
 E117	eval.txt	/*E117*
 E118	eval.txt	/*E118*
@@ -6416,6 +6418,7 @@
 fixed-7.3	version7.txt	/*fixed-7.3*
 fixed-7.4	version7.txt	/*fixed-7.4*
 flatten()	eval.txt	/*flatten()*
+flattennew()	eval.txt	/*flattennew()*
 flexwiki.vim	syntax.txt	/*flexwiki.vim*
 float-e	eval.txt	/*float-e*
 float-functions	usr_41.txt	/*float-functions*
@@ -6663,6 +6666,7 @@
 ftplugin-overrule	filetype.txt	/*ftplugin-overrule*
 ftplugin-special	usr_41.txt	/*ftplugin-special*
 ftplugins	usr_05.txt	/*ftplugins*
+fullcommand()	eval.txt	/*fullcommand()*
 funcref()	eval.txt	/*funcref()*
 function()	eval.txt	/*function()*
 function-argument	eval.txt	/*function-argument*
@@ -7633,6 +7637,7 @@
 lcs-conceal	options.txt	/*lcs-conceal*
 lcs-eol	options.txt	/*lcs-eol*
 lcs-extends	options.txt	/*lcs-extends*
+lcs-lead	options.txt	/*lcs-lead*
 lcs-nbsp	options.txt	/*lcs-nbsp*
 lcs-precedes	options.txt	/*lcs-precedes*
 lcs-space	options.txt	/*lcs-space*
@@ -7661,6 +7666,7 @@
 lisp.vim	syntax.txt	/*lisp.vim*
 lispindent()	eval.txt	/*lispindent()*
 list	eval.txt	/*list*
+list-concatenation	eval.txt	/*list-concatenation*
 list-functions	usr_41.txt	/*list-functions*
 list-identity	eval.txt	/*list-identity*
 list-index	eval.txt	/*list-index*
diff --git a/runtime/doc/terminal.txt b/runtime/doc/terminal.txt
index 5885cb1..5aec3a5 100644
--- a/runtime/doc/terminal.txt
+++ b/runtime/doc/terminal.txt
@@ -1,4 +1,4 @@
-*terminal.txt*	For Vim version 8.2.  Last change: 2021 Jan 04
+*terminal.txt*	For Vim version 8.2.  Last change: 2021 Feb 13
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -126,11 +126,28 @@
 |TerminalWinOpen| autocommand event is triggered.  This makes it possible to set
 options specifically for the terminal window and buffer.  Example: >
    au TerminalWinOpen * setlocal bufhidden=hide
+This only works properly if the terminal is not hidden.
 
-There is also the |TerminalOpen| event, but this may be triggered for a hidden
-terminal, and the current window and buffer may not be for the new terminal.
+For both hidden and non-hidden terminals this works, both for buffer-local and
+window-local options: >
+   au TerminalWinOpen,BufWinEnter * if &buftype == 'terminal'
+        \ | setlocal bufhidden=hide colorcolumn=123
+        \ | endif
+Note that for a hidden terminal the options are not set until the terminal is
+no longer hidden.
+
+There is also the |TerminalOpen| event.  Keep in mind this may be triggered
+for a hidden terminal, then the current window and buffer are not that of the
+new terminal.
 You need to use <abuf>, which is set to the terminal buffer.  Example: >
-    au TerminalOpen * call setbufvar(+expand('<abuf>'), '&colorcolumn', 123)
+    au TerminalOpen * call setbufvar(expand('<abuf>')->str2nr(),
+	    \ '&termwinscroll', 1000)
+For a window-local option, you need to delay setting the option until the
+terminal window has been created (this only works for a hidden terminal): >
+    au TerminalOpen * exe printf(
+        \    'au BufWinEnter <buffer=%d> ++once setlocal colorcolumn=%d',
+        \       expand('<abuf>')->str2nr(), 123)
+For a non-hidden terminal use |TerminalWinOpen|.
 
 Mouse events (click and drag) are passed to the terminal.  Mouse move events
 are only passed when Vim itself is receiving them.  For a terminal that is
@@ -717,6 +734,8 @@
 		    "attr"	attributes of the cell, use |term_getattr()|
 				to get the individual flags
 		    "width"	cell width: 1 or 2
+		For a double-width cell there is one item, thus the list can
+		be shorter than the width of the terminal.
 
 		Can also be used as a |method|: >
 			GetBufnr()->term_scrape(row)
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index 9e8cc35..a731211 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 8.2.  Last change: 2021 Jan 31
+*todo.txt*      For Vim version 8.2.  Last change: 2021 Feb 10
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -39,6 +39,7 @@
 -------------------- Known bugs and current work -----------------------
 
 Vim9 - Make everything work:
+- Use ":vim9cmd" as a command modifier?  Then make ":vim9" short for that.
 - Add a test for profiling with nested function calls and lambda.
 - Expand `=expr` in :next, :argedit, :argadd, :argdelete, :drop
 - Expand `=expr` in :vimgrep, :vimgrepadd, :lvimgrep, :lvimgrepadd
@@ -166,6 +167,7 @@
   However, it may also cause trouble, changing the popup of another plugin.
 - Width is not computed correctly when minwidth and maxwidth are &columns
   and padding and a scrollbar are used.  (#6676)
+- Should popup_getoptions() also return the mask?  #7774
 - Add a way to use popup_menu() synchronously: instead of invoking the
   callback, return the choice. (Ben Jackson, #6534)
 - Use popup (or popup menu) for command line completion
@@ -1114,9 +1116,6 @@
 Using "wviminfo /tmp/viminfo" does not store file marks that Vim knows about,
 it only works when merging with an existing file.  (Shougo, 2017 Jun 19, #1781)
 
-Is it possible to keep the complete menu open when calling complete()?
-(Prabir Shrestha, 2017 May 19, #1713)
-
 Memory leak in test97?  The string is actually freed.  Weird.
 
 assert_fails() can only check for the first error.  Make it possible to have
@@ -1221,10 +1220,6 @@
 
 Patch for 'cursorlinenr' option. (Ozaki Kiichi, 2016 Nov 30)
 
-When 'completeopt' has "noselect" does not insert a newline. (Lifepillar, 2017
-Apr 23, #1653)
-Can 'completeopt' be made buffer-local? (#5487)
-
 Window resizing with 'winfixheight': With a vertical split the height changes
 anyway. (Tommy allen, 2017 Feb 21, #1502)
 
@@ -1239,9 +1234,6 @@
 On Windows buffer completion sees backslash as escape char instead of path
 separator. (Toffanim, 2016 Nov 24, #1274)
 
-min() and max() spawn lots of error messages if sorted list/dictionary
-contains invalid data (Nikolay Pavlov, 2016 Sep 4, #1039)
-
 Should :vmap in matchit.vim be :xmap?  (Tony Mechelynck)
 
 Problem with whitespace in errorformat. (Gerd Wachsmuth, 2016 May 15, #807)
@@ -1342,9 +1334,6 @@
   Another one: echom matchstr(" sdfsfsf\n sfdsdfsdf",'[^\n]*')
   (2017 May 15, #1252)
 
-Feature request: Complete members of a dictionary. (Luc Hermitte, 2017 Jan 4,
-#1350)
-
 Undo message is not always properly displayed.  Patch by Ken Takata, 2013 oct
 3.  Doesn't work properly according to Yukihiro Nakadaira.
 Also see #1635.
@@ -1520,9 +1509,6 @@
 To support Thai (and other languages) word boundaries, include the ICU
 library:  http://userguide.icu-project.org/boundaryanalysis
 
-When complete() first argument is before where insert started and 'backspace'
-is Vi compatible, the completion fails. (Hirohito Higashi, 2015 Feb 19)
-
 Patch to use two highlight groups for relative numbers. (Shaun Brady, 2016 Jan
 30)
 
@@ -1728,9 +1714,6 @@
 Remark on the docs.  Should not be a compile time feature.  But then what?
 Also see #2034.
 
-Completion of ":e" is ":earlier", should be ":edit".  Complete to the matching
-command instead of doing this alphabetically. (Mikel Jorgensen)
-
 Patch to define macros for hardcoded values. (Elias Diem, 2013 Dec 14)
 
 Several syntax file match "^\s*" which may get underlined if that's in the
@@ -1775,10 +1758,6 @@
 (Pokey Rule, 2013 Jul 22)
 Patch by Marcin Szamotulski, 2013 Jul 22.
 
-The CompleteDone autocommand needs some info passed to it:
-- The word that was selected (empty if abandoned complete)
-- Type of completion: tag, omnifunc, user func.
-
 Patch to allow more types in remote_expr(). (Lech Lorens, 2014 Jan 5)
 Doesn't work for string in list.  Other way to pass all types of variables
 reliably?
@@ -2239,10 +2218,6 @@
 When completion inserts the first match, it may trigger the line to be folded.
 Disable updating folds while completion is active? (Peter Odding, 2010 Jun 9)
 
-When a:base in 'completefunc' starts with a number it's passed as a number,
-not a string. (Sean Ma)  Need to add flag to call_func_retlist() to force a
-string value.
-
 For running gvim on a USB stick: avoid the OLE registration.  Use a command
 line argument -noregister.
 
@@ -2633,10 +2608,6 @@
 Amiga patches with vbcc. (Adrien Destugues, 2010 Aug 30)
 http://pulkomandy.ath.cx/drop/vim73_vbcc_amiga.diff
 
-Insert mode completion: When editing the text and pressing CTRL-N again goes
-back to originally completed text, edited text is gone. (Peng Yu, 2008 Jul 24)
-Suggestion by Ben Schmidt, 2008 Aug 6.
-
 Problem with compound words?  (Bert, 2008 May 6)
 No warning for when flags are defined after they are used in an affix.
 
@@ -4931,6 +4902,23 @@
 
 
 Insert mode completion/expansion:
+-   Is it possible to keep the complete menu open when calling complete()?
+    (Prabir Shrestha, 2017 May 19, #1713)
+-   When 'completeopt' has "noselect" does not insert a newline.
+    (Lifepillar, 2017 Apr 23, #1653)
+-   Can 'completeopt' be made buffer-local? (#5487)
+-   When complete() first argument is before where insert started and
+    'backspace' is Vi compatible, the completion fails.
+    (Hirohito Higashi, 2015 Feb 19)
+-   The CompleteDone autocommand needs some info passed to it:
+    - The word that was selected (empty if abandoned complete)
+    - Type of completion: tag, omnifunc, user func.
+-   When a:base in 'completefunc' starts with a number it's passed as a
+    number, not a string. (Sean Ma)  Need to add flag to call_func_retlist()
+    to force a string value.
+-   When editing the text and pressing CTRL-N again goes back to originally
+    completed text, edited text is gone. (Peng Yu, 2008 Jul 24)
+    Suggestion by Ben Schmidt, 2008 Aug 6.
 -   GUI implementation of the popup menu.
 7   When searching in other files the name flash by, too fast to read.  Only
     display a name every second or so, like with ":vimgrep".
@@ -5028,6 +5016,10 @@
 
 
 Command line completion:
+-   Feature request: Complete members of a dictionary.
+    (Luc Hermitte, 2017 Jan 4, #1350)
+-   Completion of ":e" is ":earlier", should be ":edit".  Complete to the
+    matching command instead of doing this alphabetically. (Mikel Jorgensen)
 8   Change expand_interactively into a flag that is passed as an argument.
 8   With command line completion after '%' and '#', expand current/alternate
     file name, so it can be edited.  Also with modifiers, such as "%:h".
diff --git a/runtime/doc/usr_41.txt b/runtime/doc/usr_41.txt
index 7c143d7..8113bef 100644
--- a/runtime/doc/usr_41.txt
+++ b/runtime/doc/usr_41.txt
@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 8.2.  Last change: 2021 Jan 13
+*usr_41.txt*	For Vim version 8.2.  Last change: 2021 Feb 01
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
diff --git a/runtime/doc/version6.txt b/runtime/doc/version6.txt
index 6b9f1d9..ca1800f 100644
--- a/runtime/doc/version6.txt
+++ b/runtime/doc/version6.txt
@@ -1,4 +1,4 @@
-*version6.txt*  For Vim version 8.2.  Last change: 2020 Aug 17
+*version6.txt*  For Vim version 8.2.  Last change: 2021 Jan 17
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
diff --git a/runtime/doc/vim9.txt b/runtime/doc/vim9.txt
index 220a19b..804a98a 100644
--- a/runtime/doc/vim9.txt
+++ b/runtime/doc/vim9.txt
@@ -1,4 +1,4 @@
-*vim9.txt*	For Vim version 8.2.  Last change: 2021 Jan 23
+*vim9.txt*	For Vim version 8.2.  Last change: 2021 Feb 03
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
diff --git a/runtime/doc/windows.txt b/runtime/doc/windows.txt
index 0e0d9d5..2a31526 100644
--- a/runtime/doc/windows.txt
+++ b/runtime/doc/windows.txt
@@ -1,4 +1,4 @@
-*windows.txt*   For Vim version 8.2.  Last change: 2020 Dec 18
+*windows.txt*   For Vim version 8.2.  Last change: 2021 Feb 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -208,7 +208,9 @@
 :[N]new [++opt] [+cmd] {file}
 :[N]sp[lit] [++opt] [+cmd] {file}			*:split_f*
 		Create a new window and start editing file {file} in it.  This
-		behaves like a ":split" first, and then an ":e" command.
+		behaves almost like a ":split" first, and then an ":edit"
+		command, but the alternate file name in the original window is
+		set to {file}.
 		If [+cmd] is given, execute the command when the file has been
 		loaded |+cmd|.
 		Also see |++opt|.