diff --git a/runtime/doc/index.txt b/runtime/doc/index.txt
index 5677586..a229f9d 100644
--- a/runtime/doc/index.txt
+++ b/runtime/doc/index.txt
@@ -1235,6 +1235,7 @@
 |:lgetfile|	:lg[etfile]	read file with locations
 |:lgrep|	:lgr[ep]	run 'grepprg' and jump to first match
 |:lgrepadd|	:lgrepa[dd]	like :grep, but append to current list
+|:lhelpgrep|	:lh[elpgrep]	like ":helpgrep" but uses location list
 |:ll|		:ll		go to specific location
 |:llast|	:lla[st]	go to the specified location, default last one
 |:llist|	:lli[st]	list all locations
diff --git a/runtime/doc/insert.txt b/runtime/doc/insert.txt
index 88be8cb..d1e0104 100644
--- a/runtime/doc/insert.txt
+++ b/runtime/doc/insert.txt
@@ -1,4 +1,4 @@
-*insert.txt*    For Vim version 7.0aa.  Last change: 2006 Jan 30
+*insert.txt*    For Vim version 7.0aa.  Last change: 2006 Feb 07
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -956,39 +956,61 @@
 
 This applies to 'completefunc' and 'omnifunc'.
 
-The function will be invoked with two arguments.  First the function is called
-to find the start of the text to be completed.  Secondly the function is
-called to actually find the matches.
+The function is called in two different ways:
+- First the function is called to find the start of the text to be completed.
+- Later the function is called to actually find the matches.
 
 On the first invocation the arguments are:
    a:findstart  1
    a:base	empty
 
-The function must return the column of where the completion starts.  It must
-be a number between zero and the cursor column "col('.')".  This involves
-looking at the characters just before the cursor and including those
-characters that could be part of the completed item.  The text between this
-column and the cursor column will be replaced with the matches.  Return -1 if
-no completion can be done.
+The function must return the column where the completion starts.  It must be a
+number between zero and the cursor column "col('.')".  This involves looking
+at the characters just before the cursor and including those characters that
+could be part of the completed item.  The text between this column and the
+cursor column will be replaced with the matches.  Return -1 if no completion
+can be done.
 
 On the second invocation the arguments are:
    a:findstart  0
-   a:base	the text with which matches should match, what was
+   a:base	the text with which matches should match; the text that was
 		located in the first call (can be empty)
 
 The function must return a List with the matching words.  These matches
 usually include the "a:base" text.  When there are no matches return an empty
-List.  When one of the items in the list cannot be used as a string (e.g., a
-Dictionary) then an error message is given and further items in the list are
-not used.
+List.
+
+Each list item can either be a string or a Dictionary.  When it is a string it
+is used as the completion.  When it is a Dictionary it can contain these
+items:
+	word		the completion, mandatory
+	menu		extra text for the popup menu
+	info		more information about the item
+	kind		single letter indicating the type of completion
+
+All of these must be a string.  If an item does not meet these requirements
+then an error message is given and further items in the list are not used.
+You can mix string and Dictionary items in the returned list.
+
+The "menu" item is used in the popup menu and may be truncated, thus it should
+be relatively short.  The "info" item can be longer, it may be displayed in a
+balloon.
+
+The "kind" item uses a single letter to indicate the kind of completion.  This
+may be used to show the completion differently (different color or icon).
+Currently these types can be used:
+	v	variable
+	f	function or method
+	c	composite (struct, object)
 
 When searching for matches takes some time call |complete_add()| to add each
 match to the total list.  These matches should then not appear in the returned
 list!  Call |complete_check()| now and then to allow the user to press a key
 while still searching for matches.  Stop searching when it returns non-zero.
 
-The function may move the cursor, it is restored afterwards.  This option
-cannot be set from a |modeline| or in the |sandbox|, for security reasons.
+The function is allowed to move the cursor, it is restored afterwards.  This
+option cannot be set from a |modeline| or in the |sandbox|, for security
+reasons.
 
 An example that completes the names of the months: >
 	fun! CompleteMonths(findstart, base)
@@ -1050,11 +1072,16 @@
 - There are at least two matches.
 
 While the menu is displayed these keys have a special meaning:
-<CR> and <Enter>: Accept the currently selected match
-<Up>:		  Select the previous match, as if CTRL-P was used
-<Down>:		  Select the next match, as if CTRL-N was used
-<PageUp>:	  Select a match several entries back
-<PageDown>:	  Select a match several entries further
+<CR> and <Enter> Accept the currently selected match
+<Up>		  Select the previous match, as if CTRL-P was used
+<Down>		  Select the next match, as if CTRL-N was used
+<PageUp>	  Select a match several entries back
+<PageDown>	  Select a match several entries further
+<BS> and CTRL-H   Delete one character, find the matches for the shorter word
+		  before the cursor.  This may find more matches.
+CTRL-L		  Add one character from the current match, may reduce the
+		  number of matches.  Does not work after selecting one of the
+		  matches with CTRL-N, <Up>, etc.
 
 The colors of the menu can be changed with these highlight groups:
 Pmenu		normal item  |hl-Pmenu|
@@ -1073,6 +1100,8 @@
 it here: http://ctags.sourceforge.net/
 For version 5.5.4 you should add a patch that adds the "typename:" field:
 ftp://ftp.vim.org/pub/vim/unstable/patches/ctags-5.5.4.patch
+A compiled .exe for MS-Windows can be found at:
+http://georgevreilly.com/vim/ctags.html
 
 If you want to complete system functions you can do something like this.  Use
 ctags to generate a tags file for all the system header files: >
@@ -1104,14 +1133,14 @@
 specification. 
 
 
-(X)HTML							*ft-html-omni*
+HTML and XHTML						*ft-html-omni*
 							*ft-xhtml-omni*
 
 CTRL-X CTRL-O provides completion of various elements of (X)HTML files.
 It is designed to support writing of XHTML 1.0 Strict files but will
 also works for other versions of HTML. Features:
 
-- after "<" complete tag name depending on context (no div suggest
+- after "<" complete tag name depending on context (no div suggestion
   inside of an a tag)
 - inside of tag complete proper attributes (no width attribute for an
   a tag)
@@ -1120,17 +1149,21 @@
 - complete names of entities
 - complete values of "class" and "id" attributes with data obtained from
   style tag and included CSS files
-- when completing "style" attribute or working inside of "style" tag
+- when completing value of "style" attribute or working inside of "style" tag
   switch to |ft-css-omni| completion
+- when completing values of events attributes or working inside of "script" tag
+  switch to |ft-javascript-omni| completion
 - when used after "</" CTRL-X CTRL-O will close the last opened tag
 
 Note: When used first time completion menu will be shown with little delay
-- this is time needed for loading of data file.
+- this is time needed for loading of data file.  
+Note: Completion may fail in badly formatted documents. In such case try to
+run |:make| command to detect formatting problems.
 
 
 JAVASCRIPT                                             *ft-javascript-omni*
 
-Completion of most elements of JavaScript language and HTML DOM.
+Completion of most elements of JavaScript language and DOM elements.
 
 Complete:
 
@@ -1138,13 +1171,13 @@
 - function name
 - function arguments
 - properties of variables trying to detect type of variable
-- complete HTML DOM objects and properties depending on context
+- complete DOM objects and properties depending on context
 - keywords of language
 
-Completion works in separate JavaScript files (&ft==javascript) and inside of
-<script> tag of (X)HTML. Note: scanning will be only in scope of current tag.
-At the moment separate files are not taken into account.
-
+Completion works in separate JavaScript files (&ft==javascript), inside of
+<script> tag of (X)HTML and in values of event attributes (including scanning
+of external files.
+ 
 DOM compatibility
 
 At the moment (beginning of 2006) there are two main browsers - MS Internet
diff --git a/runtime/doc/netbeans.txt b/runtime/doc/netbeans.txt
index d642497..71f8f8e 100644
--- a/runtime/doc/netbeans.txt
+++ b/runtime/doc/netbeans.txt
@@ -1,4 +1,4 @@
-*netbeans.txt*  For Vim version 7.0aa.  Last change: 2005 Apr 04
+*netbeans.txt*  For Vim version 7.0aa.  Last change: 2006 Feb 05
 
 
 		  VIM REFERENCE MANUAL    by Gordon Prieur
@@ -179,6 +179,7 @@
 Region is guarded, cannot modify
 		NetBeans defines guarded areas in the text, which you cannot
 		change.
+		Also sets the current buffer, if necessary.
 
 							*E656*
 NetBeans disallows writes of unmodified buffers
@@ -485,8 +486,10 @@
 		Not implemented.
 
 setDot off	Make the buffer the current buffer and set the cursor at the
-		specified position.  If there are folds they are opened to
-		make the cursor line visible.
+		specified position.  If the buffer is open in another window
+		than make that window the current window.
+		If there are folds they are opened to make the cursor line
+		visible.
 		In version 2.1 "lnum/col" can be used instead of "off".
 
 setExitDelay seconds
@@ -566,6 +569,7 @@
 
 unguard off len
 		Opposite of "guard", remove guarding for a text area.
+		Also sets the current buffer, if necessary.
 
 version		Not implemented.
 
@@ -612,6 +616,7 @@
 			123		no problem
 			123 !message	failed
 		Note that the message in the reply is not quoted.
+		Also sets the current buffer, if necessary.
 
 remove off length
 		Delete "length" bytes of text at position "off".  Both
@@ -620,6 +625,7 @@
 			123		no problem
 			123 !message	failed
 		Note that the message in the reply is not quoted.
+		Also sets the current buffer, if necessary.
 
 saveAndExit	Perform the equivalent of closing Vim: ":confirm qall".
 		If there are no changed files or the user does not cancel the
diff --git a/runtime/doc/tags b/runtime/doc/tags
index 4d69b87..54cd9dd 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -2151,6 +2151,8 @@
 :lgrep	quickfix.txt	/*:lgrep*
 :lgrepa	quickfix.txt	/*:lgrepa*
 :lgrepadd	quickfix.txt	/*:lgrepadd*
+:lh	various.txt	/*:lh*
+:lhelpgrep	various.txt	/*:lhelpgrep*
 :list	various.txt	/*:list*
 :ll	quickfix.txt	/*:ll*
 :lla	quickfix.txt	/*:lla*
@@ -5420,7 +5422,6 @@
 hebrew.txt	hebrew.txt	/*hebrew.txt*
 help	various.txt	/*help*
 help-context	help.txt	/*help-context*
-help-tags	tags	1
 help-translated	various.txt	/*help-translated*
 help-xterm-window	various.txt	/*help-xterm-window*
 help.txt	help.txt	/*help.txt*
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index ab46f83..95df11b 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 7.0aa.  Last change: 2006 Feb 04
+*todo.txt*      For Vim version 7.0aa.  Last change: 2006 Feb 07
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -30,25 +30,19 @@
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
-Variant of ":helpgrep" that uses a location list?  How about:
-    :lhelpgrep  (use local list in help window, not current window)
+Crash with X command server (Ciaran McCreesh).
 
 ccomplete / omnicomplete:
-- Extra info for each entry to show in a tooltip kind of thing.
-    Should use a dictionary for each entry.  Fields could be:
-	word	the completed word
-	menu	menu text (use word when missing)
-	info	extra info, to be displayed in balloon (e.g., function args)
-	kind	single letter indicating the type of word:
-		    v = variable, f = function/method, c = composite (object,
-		    struct pointer).
-  For C add tag "kind" field?
+When editing compl_leader <CR> should accept the current match.
+Somehow select another match without changing the compl_leader, so that you
+can use CTRL-L next?  Perhaps with <S-Up> and <S-Down>?
 - Complete the longest common match instead of the first match?
     Do this when "longest" is in 'completeopt'.
     Pressing CTRL-N or CTRL-P will get the whole match, as before.
     Need to postpone inserting anything until all matches have been found.
     Then add a completion item with the longest common string (after what was
     typed), if there is one.
+- For C add tag "kind" field to each match?
 - Finding out if an item has members (to add '.' or '->') requires a grep in
   the tags files, that is very slow.  Is there another solution?  At least
   stop at the first match.
@@ -109,6 +103,9 @@
 An error in a function uses a line number that doesn't take line continuation
 into account. (Mikolaj Machowski)  Store line count in an extra array?
 
+Is it possible to keep the command-line window open?  Would actually work like
+closing it, executing the command and re-opening it (at the same position).
+
 Mac unicode patch (Da Woon Jung):
 - selecting proportional font breaks display
 - UTF-8 text causes display problems.  Font replacement causes this.
diff --git a/runtime/doc/various.txt b/runtime/doc/various.txt
index 4cb9687..a7cb743 100644
--- a/runtime/doc/various.txt
+++ b/runtime/doc/various.txt
@@ -648,6 +648,15 @@
 			compresses the help files).
 			{not in Vi}
 
+							*:lh* *:lhelpgrep*
+:lh[elpgrep] {pattern}[@xx]
+			Same as ":helpgrep", except the location list is used
+			instead of the quickfix list. If the help window is
+			already opened, then the location list for that window
+			is used. Otherwise, a new help window is opened and
+			the location list for that window is set.  The
+			location list for the current window is not changed.
+
 							*:exu* *:exusage*
 :exu[sage]		Show help on Ex commands.  Added to simulate the Nvi
 			command. {not in Vi}
diff --git a/runtime/doc/version7.txt b/runtime/doc/version7.txt
index d0d1e85..ced704f 100644
--- a/runtime/doc/version7.txt
+++ b/runtime/doc/version7.txt
@@ -1,4 +1,4 @@
-*version7.txt*  For Vim version 7.0aa.  Last change: 2006 Feb 04
+*version7.txt*  For Vim version 7.0aa.  Last change: 2006 Feb 05
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -192,8 +192,8 @@
 
 This could also be called "intellisense", but that is a trademark.  It is a
 smart kind of completion.  The text in front of the cursor is inspected to
-figure out what could be following.  This considers struct and class members,
-unions, etc.
+figure out what could be following.  This may suggest struct and class
+members, system functions, etc.
 
 Use CTRL-X CTRL-O in Insert mode to start the completion.  |i_CTRL-X_CTRL-O|
 
@@ -201,8 +201,11 @@
 figures out the completion.
 
 Currently supported languages:
-	C	|ft-c-omni|
-	XHTML	|ft-html-omni|
+	C					|ft-c-omni|
+	(X)HTML with CSS			|ft-html-omni|
+	JavaScript				|ft-javascript-omni|
+	any language wih syntax highligting	|ft-syntax-omni|
+	XML					|ft-xml-omni|
 
 When the 'completeopt' option contains "menu" then matches for Insert mode
 completion are displayed in a popup menu.
@@ -460,7 +463,30 @@
 |:lgrepadd|		Like |:grepadd| but use the location list.
 |:lvimgrep|		Like |:vimgrep| but use the location list.
 |:lvimgrepadd|		Like |:vimgrepadd| but use the location list.
+|:lhelpgrep|		Like |:helpgrep| but use the location list.
+|:lfile|		Like |:cfile| but use the location list.
+|:lgetfile|		Like |:cgetfile| but use the location list.
+|:laddfile|		Like |:caddfile| but use the location list.
+|:lbuffer|		Like |:cbuffer| but use the location list.
 |:laddbuffer|		Like |:caddbuffer| but use the location list.
+|:lexpr|		Like |:cexpr| but use the location list.
+|:laddexpr|		Like |:caddexpr| but use the location list.
+|:ll|			Like |:cc| but use the location list.
+|:llist|		Like |:clist| but use the location list.
+|:lnext|		Like |:cnext| but use the location list.
+|:lprev|		Like |:cprev| but use the location list.
+|:lNext|		Like |:cNext| but use the location list.
+|:lfirst|		Like |:cfirst| but use the location list.
+|:lrewind|		Like |:crewind| but use the location list.
+|:llast|		Like |:clast| but use the location list.
+|:lnfile|		Like |:cnfile| but use the location list.
+|:lpfile|		Like |:cpfile| but use the location list.
+|:lNfile|		Like |:cNfile| but use the location list.
+|:lolder|		Like |:colder| but use the location list.
+|:lnewer|		Like |:cnewer| but use the location list.
+|:lwindow|		Like |:cwindow| but use the location list.
+|:lopen|		Like |:copen| but use the location list.
+|:lclose|		Like |:cclose| but use the location list.
 
 
 Ex command modifiers: ~