diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt
index 86cc88e..1ffd7ed 100644
--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 7.4.  Last change: 2014 May 07
+*eval.txt*	For Vim version 7.4.  Last change: 2014 Jun 12
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -3260,6 +3260,10 @@
 		String when a modifier (shift, control, alt) was used that is
 		not included in the character.
 
+		When [expr] is 0 and Esc is typed, there will be a short delay
+		while Vim waits to see if this is the start of an escape
+		sequence.
+
 		When [expr] is 1 only the first byte is returned.  For a
 		one-byte character it is the character itself as a number.
 		Use nr2char() to convert it to a String.
@@ -3475,6 +3479,34 @@
 			'pattern': 'FIXME', 'priority': 10, 'id': 2}] >
 			:unlet m
 <
+							*getpid()*
+getpid()	Return a Number which is the process ID of the Vim process.
+		On Unix and MS-Windows this is a unique number, until Vim
+		exits.	On MS-DOS it's always zero.
+
+							*getpos()*
+getpos({expr})	Get the position for {expr}.  For possible values of {expr}
+		see |line()|.  For getting the cursor position see
+		|getcurpos()|.
+		The result is a |List| with four numbers:
+		    [bufnum, lnum, col, off]
+		"bufnum" is zero, unless a mark like '0 or 'A is used, then it
+		is the buffer number of the mark.
+		"lnum" and "col" are the position in the buffer.  The first
+		column is 1.
+		The "off" number is zero, unless 'virtualedit' is used.  Then
+		it is the offset in screen columns from the start of the
+		character.  E.g., a position within a <Tab> or after the last
+		character.
+		Note that for '< and '> Visual mode matters: when it is "V"
+		(visual line mode) the column of '< is zero and the column of
+		'> is a large number.
+		This can be used to save and restore the position of a mark: >
+			let save_a_mark = getpos("'a")
+			...
+			call setpos(''a', save_a_mark
+<		Also see |getcurpos()| and |setpos()|.
+
 
 getqflist()						*getqflist()*
 		Returns a list with all the current quickfix errors.  Each
@@ -4506,34 +4538,6 @@
 		characters.  nr2char(0) is a real NUL and terminates the
 		string, thus results in an empty string.
 
-							*getpid()*
-getpid()	Return a Number which is the process ID of the Vim process.
-		On Unix and MS-Windows this is a unique number, until Vim
-		exits.	On MS-DOS it's always zero.
-
-							*getpos()*
-getpos({expr})	Get the position for {expr}.  For possible values of {expr}
-		see |line()|.  For getting the cursor position see
-		|getcurpos()|.
-		The result is a |List| with four numbers:
-		    [bufnum, lnum, col, off]
-		"bufnum" is zero, unless a mark like '0 or 'A is used, then it
-		is the buffer number of the mark.
-		"lnum" and "col" are the position in the buffer.  The first
-		column is 1.
-		The "off" number is zero, unless 'virtualedit' is used.  Then
-		it is the offset in screen columns from the start of the
-		character.  E.g., a position within a <Tab> or after the last
-		character.
-		Note that for '< and '> Visual mode matters: when it is "V"
-		(visual line mode) the column of '< is zero and the column of
-		'> is a large number.
-		This can be used to save and restore the position of a mark: >
-			let save_a_mark = getpos("'a")
-			...
-			call setpos(''a', save_a_mark
-<		Also see |getcurpos()| and |setpos()|.
-
 or({expr}, {expr})					*or()*
 		Bitwise OR on the two arguments.  The arguments are converted
 		to a number.  A List, Dict or Float argument causes an error.
@@ -5587,6 +5591,7 @@
 		
 		If you want a list to remain unmodified make a copy first: >
 			:let sortedlist = sort(copy(mylist))
+
 <		Uses the string representation of each item to sort on.
 		Numbers sort after Strings, |Lists| after Numbers.
 		For sorting text in the current buffer use |:sort|.
diff --git a/runtime/doc/intro.txt b/runtime/doc/intro.txt
index 72e9b9b..a03079c 100644
--- a/runtime/doc/intro.txt
+++ b/runtime/doc/intro.txt
@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 7.4.  Last change: 2013 Jun 17
+*intro.txt*     For Vim version 7.4.  Last change: 2014 May 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -136,9 +136,10 @@
 Bug reports:				*bugs* *bug-reports* *bugreport.vim*
 
 Send bug reports to: Vim Developers <vim_dev@vim.org>
-This is a maillist, many people will see the message.  If you don't want that,
-e.g. because it is a security issue, send it to <bugs@vim.org>, this only goes
-to the Vim maintainer (that's Bram).
+This is a maillist, you need to become a member first and many people will see
+the message.  If you don't want that, e.g. because it is a security issue,
+send it to <bugs@vim.org>, this only goes to the Vim maintainer (that's Bram).
+
 Please be brief; all the time that is spent on answering mail is subtracted
 from the time that is spent on improving Vim!  Always give a reproducible
 example and try to find out which settings or other things influence the
diff --git a/runtime/doc/map.txt b/runtime/doc/map.txt
index 4eb36b8..3ac8e5d 100644
--- a/runtime/doc/map.txt
+++ b/runtime/doc/map.txt
@@ -1,4 +1,4 @@
-*map.txt*       For Vim version 7.4.  Last change: 2014 May 10
+*map.txt*       For Vim version 7.4.  Last change: 2014 Jun 02
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -60,17 +60,17 @@
 			{rhs}, is then further scanned for mappings.  This
 			allows for nested and recursive use of mappings.
 
-
-:no[remap]  {lhs} {rhs}		|mapmode-nvo|		*:no*  *:noremap*
-:nn[oremap] {lhs} {rhs}		|mapmode-n|		*:nn*  *:nnoremap*
-:vn[oremap] {lhs} {rhs}		|mapmode-v|		*:vn*  *:vnoremap*
-:xn[oremap] {lhs} {rhs}		|mapmode-x|		*:xn*  *:xnoremap*
-:snor[emap] {lhs} {rhs}		|mapmode-s|		*:snor* *:snoremap*
-:ono[remap] {lhs} {rhs}		|mapmode-o|		*:ono* *:onoremap*
-:no[remap]! {lhs} {rhs}		|mapmode-ic|		*:no!* *:noremap!*
-:ino[remap] {lhs} {rhs}		|mapmode-i|		*:ino* *:inoremap*
-:ln[oremap] {lhs} {rhs}		|mapmode-l|		*:ln*  *:lnoremap*
-:cno[remap] {lhs} {rhs}		|mapmode-c|		*:cno* *:cnoremap*
+						*:nore* *:norem*
+:no[remap]  {lhs} {rhs}		|mapmode-nvo|	*:no*  *:noremap* *:nor*
+:nn[oremap] {lhs} {rhs}		|mapmode-n|	*:nn*  *:nnoremap*
+:vn[oremap] {lhs} {rhs}		|mapmode-v|	*:vn*  *:vnoremap*
+:xn[oremap] {lhs} {rhs}		|mapmode-x|	*:xn*  *:xnoremap*
+:snor[emap] {lhs} {rhs}		|mapmode-s|	*:snor* *:snoremap*
+:ono[remap] {lhs} {rhs}		|mapmode-o|	*:ono* *:onoremap*
+:no[remap]! {lhs} {rhs}		|mapmode-ic|	*:no!* *:noremap!*
+:ino[remap] {lhs} {rhs}		|mapmode-i|	*:ino* *:inoremap*
+:ln[oremap] {lhs} {rhs}		|mapmode-l|	*:ln*  *:lnoremap*
+:cno[remap] {lhs} {rhs}		|mapmode-c|	*:cno* *:cnoremap*
 			Map the key sequence {lhs} to {rhs} for the modes
 			where the map command applies.  Disallow mapping of
 			{rhs}, to avoid nested and recursive mappings.  Often
@@ -828,12 +828,10 @@
 	  let &selection = "inclusive"
 	  let reg_save = @@
 
-	  if a:0  " Invoked from Visual mode, use '< and '> marks.
-	    silent exe "normal! `<" . a:type . "`>y"
+	  if a:0  " Invoked from Visual mode, use gv command.
+	    silent exe "normal! gvy"
 	  elseif a:type == 'line'
 	    silent exe "normal! '[V']y"
-	  elseif a:type == 'block'
-	    silent exe "normal! `[\<C-V>`]y"
 	  else
 	    silent exe "normal! `[v`]y"
 	  endif
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index f2e6e66..71280f2 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 7.4.  Last change: 2014 May 13
+*options.txt*	For Vim version 7.4.  Last change: 2014 May 28
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
diff --git a/runtime/doc/pattern.txt b/runtime/doc/pattern.txt
index 8930092..207a43d 100644
--- a/runtime/doc/pattern.txt
+++ b/runtime/doc/pattern.txt
@@ -1,4 +1,4 @@
-*pattern.txt*   For Vim version 7.4.  Last change: 2014 May 13
+*pattern.txt*   For Vim version 7.4.  Last change: 2014 May 28
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1332,7 +1332,7 @@
 		patterns defined by both |matchadd()| and |:match|.
 
 		Highlighting matches using |:match| are limited to three
-		matches (aside from |:match|, |:2match| and |:3match|are
+		matches (aside from |:match|, |:2match| and |:3match| are
 		available). |matchadd()| does not have this limitation and in
 		addition makes it possible to prioritize matches.
 
diff --git a/runtime/doc/syntax.txt b/runtime/doc/syntax.txt
index a1230e1..e68ad43 100644
--- a/runtime/doc/syntax.txt
+++ b/runtime/doc/syntax.txt
@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 7.4.  Last change: 2014 Apr 05
+*syntax.txt*	For Vim version 7.4.  Last change: 2014 Jun 03
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -2279,7 +2279,7 @@
 
 	:let perl_include_pod = 0
 
-The reduce the complexity of parsing (and increase performance) you can switch
+To reduce the complexity of parsing (and increase performance) you can switch
 off two elements in the parsing of variable names and contents. >
 
 To handle package references in variable and function names not differently
diff --git a/runtime/doc/tags b/runtime/doc/tags
index c3f335c..bda3c6d 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -2523,6 +2523,7 @@
 :noautocmd	autocmd.txt	/*:noautocmd*
 :noh	pattern.txt	/*:noh*
 :nohlsearch	pattern.txt	/*:nohlsearch*
+:nor	map.txt	/*:nor*
 :norea	map.txt	/*:norea*
 :noreabbrev	map.txt	/*:noreabbrev*
 :noremap	map.txt	/*:noremap*
@@ -4795,6 +4796,7 @@
 arglist	editing.txt	/*arglist*
 arglist-position	editing.txt	/*arglist-position*
 arglist-quit	usr_07.txt	/*arglist-quit*
+arglistid()	eval.txt	/*arglistid()*
 argument-list	editing.txt	/*argument-list*
 argv()	eval.txt	/*argv()*
 as	motion.txt	/*as*
@@ -6128,6 +6130,7 @@
 getcmdline()	eval.txt	/*getcmdline()*
 getcmdpos()	eval.txt	/*getcmdpos()*
 getcmdtype()	eval.txt	/*getcmdtype()*
+getcurpos()	eval.txt	/*getcurpos()*
 getcwd()	eval.txt	/*getcwd()*
 getfontname()	eval.txt	/*getfontname()*
 getfperm()	eval.txt	/*getfperm()*
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index 61616b0..fb203b3 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 7.4.  Last change: 2014 May 22
+*todo.txt*      For Vim version 7.4.  Last change: 2014 Jun 12
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -50,6 +50,8 @@
 Problem that a previous silent ":throw" causes a following try/catch not to
 work. (ZyX, 2013 Sep 28)
 
+Completion for :buf does not use 'wildignorecase'. (Akshay H, 2014 May 31)
+
 ":cd C:\Windows\System32\drivers\etc*" does not work, even though the
 directory exists. (Sergio Gallelli, 2013 Dec 29)
 
@@ -60,13 +62,28 @@
 
 Python: ":py raw_input('prompt')" doesn't work. (Manu Hack)
 
+Value returned by virtcol() changes depending on how lines wrap.  This is
+inconsistant with the documentation.
+
+Serbian translation of the vimtutor. (Ivan Nejgebauer, 2014 Jun 2)
+
+Patch to add matchaddpos(), match using a position instead of a pattern.
+To be used for matchparen. (Alexey Radkov, 2014 Jun 1)
+Waiting for tests.  Some on Jun 2.
+
 MS-Windows: Crash opening very long file name starting with "\\".
 (Christian Brock, 2012 Jun 29)
 
 Syntax highlighting slow (hangs) in SASS file. (Niek Bosch, 2013 Aug 21)
 
+Patch to translate 0xce in K_NUL 3. (Yasuhiro Matsumoto, 2014 June 6)
+Doesn't work yet.
+
 Adding "~" to 'cdpath' doesn't work for completion?  (Davido, 2013 Aug 19)
 
+"hi link" does not respect groups with GUI settings only. (Mark Lodato, 2014
+Jun 8)
+
 Syntax file for gnuplot.  Existing one is very old. (Andrew Rasmussen, 2014
 Feb 24)
 
@@ -90,7 +107,7 @@
 Update from Ken Takata, 2014 Jan 10. Newer 2014 Apr 3.
 
 Win32: use 64 bit stat() if possible. (Ken Takata, 2014 May 12)
-More tests May 14.
+More tests May 14. Update May 29.
 
 Idea: For a window in the middle (has window above and below it), use
 right-mouse-drag on the status line to move a window up/down without changing
@@ -99,22 +116,23 @@
 Can we make ":unlet $VAR" use unsetenv() to delete the env var?
 What for systems that don't have unsetenv()?
 
-Patch to make getchar() work for typing Esc. (Yasuhiro Matsumoto, 2014 May 13)
-
-Patch for problem that v:register is set to '_' after deleting into the black
-hole register.
-
 This does not give an error: (Andre Sihera, 2014 Mar 21)
     vim -u NONE 1 2 3 -c 'bufdo if 1 | echo 1'
 This neither: (ZyX)
     vim -u NONE 1 2 3 -c 'bufdo while 1 | echo 1'
 
+Patch for signs in GTK. (Christian Brabandt, 2014 Jun 10)
+Asked about it.
+
 'viewdir' default on MS-Windows is not a good choice, it's a system directory.
 Change 'viewdir' to "$HOME/vimfiles/view" and use 'viewdiralt' to also read
 from?
 
-Patch to add arglistid(), get the ID of the currently used argument list.
-(Marcin Szamotulski, 2014 Apr 27)
+Problem with upwards search on Windows (works OK on Linux). (Brett Stahlman,
+2014 Jun 8)
+
+When 'clipboard' is "unnamed", :g/pat/d is very slow.  Only set the clipboard
+after the last delete? (Praful, 2014 May 28)
 
 Include a plugin manager with Vim? Neobundle seems to be the best currently.
 Long message about this from ZyX, 2014 Mar 23.  And following replies.
@@ -153,16 +171,6 @@
 Setting the spell file in a session only reads the local additions, not the
 normal spell file. (Enno Nagel, 2014 Mar 29)
 
--   Patch for 'breakindent' option: repeat indent for wrapped line. (Vaclav
-    Smilauer, 2004 Sep 13, fix Oct 31, update 2007 May 30)
-    Version for latest MacVim: Tobia Conforto, 2009 Nov 23
-    More recent version: https://retracile.net/wiki/VimBreakIndent
-    Posted to vim-dev by Taylor Hedberg, 2011 Nov 25
-    Update by Taylor Hedberg, 2013 May 30.
-    Updated for Vim 7.4 by Ken Takata, 2013 Oct 5.
-    Update by Christian Brabandt, 2014 May 9.  Remarks by Ken Takata.
-    Update by Christian 2014 May 12, github link on May 15
-
 When typing the first character of a command, e.g. "f", then using a menu, the
 menu item doesn't work.  Clear typeahead when using a menu?
 
@@ -176,9 +184,10 @@
 instead. (Samuel Ferencik, 2013 Sep 28)
 
 Patch for XDG base directory support. (Jean François Bignolles, 2014 Mar 4)
+Remark on the docs.  Should not be a compile time feature.  But then what?
 
-Patch to add flag to shortmess to avoid giving completion messages.
-(Shougo Matsu, 2014 Jan 6, update Jan 11)
+Completion of ":e" is ":earlier", whould be ":edit".  Complete to the matching
+command instead of doing this alphabetically. (Mikel Jorgensen)
 
 Patch to add v:completed_item. (Shougo Matsu, 2013 Nov 29).
 
@@ -314,6 +323,17 @@
 Patch to fix that 'cedit' is recognized after :normal. (Christian Brabandt,
 2013 Mar 19, later message)
 
+-   Patch for 'breakindent' option: repeat indent for wrapped line. (Vaclav
+    Smilauer, 2004 Sep 13, fix Oct 31, update 2007 May 30)
+    Version for latest MacVim: Tobia Conforto, 2009 Nov 23
+    More recent version: https://retracile.net/wiki/VimBreakIndent
+    Posted to vim-dev by Taylor Hedberg, 2011 Nov 25
+    Update by Taylor Hedberg, 2013 May 30.
+    Updated for Vim 7.4 by Ken Takata, 2013 Oct 5.
+    Update by Christian Brabandt, 2014 May 9.  Remarks by Ken Takata.
+    Update by Christian 2014 May 12, github link on May 15
+    2014 May 28: remarks from Bram
+
 Patch to view coverage of the tests. (Nazri Ramliy, 2013 Feb 15)
 
 Patch to invert characters differently in GTK. (Yukihiro Nakadaira, 2013 May
@@ -358,9 +378,6 @@
 
 Bug: findfile("any", "file:///tmp;") does not work.
 
-v:register is not directly reset to " after a delete command that specifies a
-register.  It is reset after the next command. (Steve Vermeulen, 2013 Mar 16)
-
 'ff' is wrong for one-line file without EOL. (Issue 77)
 
 Patch to set antialiasing style on Windows. (Ondrej Balaz, 2013 Mar 14)
@@ -791,10 +808,6 @@
     file names unique, also support this for 'backupdir'. (Mikolaj Machowski)
     Patch by Christian Brabandt, 2010 Oct 21.
 
-getpos()/setpos() don't include curswant.  getpos() could return a fifth
-element.  setpos() could accept an optional fifth element.
-Patch by Christian Brabandt, 2010 Sep 6.  Again 2013 Aug 22.
-
 With "tw=55 fo+=a" typing space before ) doesn't work well. (Scott Mcdermott,
 2010 Oct 24)
 
diff --git a/runtime/doc/undo.txt b/runtime/doc/undo.txt
index 414a63b..46469b3 100644
--- a/runtime/doc/undo.txt
+++ b/runtime/doc/undo.txt
@@ -1,4 +1,4 @@
-*undo.txt*      For Vim version 7.4.  Last change: 2013 Sep 08
+*undo.txt*      For Vim version 7.4.  Last change: 2014 May 24
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -97,9 +97,9 @@
 			or redo.
 			{not in Vi}
 
-This is most useful when you need to prompt the user halfway a change.  For
-example in a function that calls |getchar()|.  Do make sure that there was a
-related change before this that you must join with.
+This is most useful when you need to prompt the user halfway through a change.
+For example in a function that calls |getchar()|.  Do make sure that there was
+a related change before this that you must join with.
 
 This doesn't work by itself, because the next key press will start a new
 change again.  But you can do something like this: >
diff --git a/runtime/doc/usr_41.txt b/runtime/doc/usr_41.txt
index ee62cac..effe6db 100644
--- a/runtime/doc/usr_41.txt
+++ b/runtime/doc/usr_41.txt
@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 7.4.  Last change: 2014 Apr 05
+*usr_41.txt*	For Vim version 7.4.  Last change: 2014 May 28
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -708,6 +708,7 @@
 	cursor()		position the cursor at a line/column
 	screencol()		get screen column of the cursor
 	screenrow()		get screen row of the cursor
+	getcurpos()		get position of the cursor
 	getpos()		get position of cursor, mark, etc.
 	setpos()		set position of cursor, mark, etc.
 	byte2line()		get line number at a specific byte count