diff --git a/src/normal.c b/src/normal.c
index 98ec9ef..1fddeae 100644
--- a/src/normal.c
+++ b/src/normal.c
@@ -14,24 +14,14 @@
 
 #include "vim.h"
 
-/*
- * The Visual area is remembered for reselection.
- */
-static int	resel_VIsual_mode = NUL;	/* 'v', 'V', or Ctrl-V */
-static linenr_T	resel_VIsual_line_count;	/* number of lines */
-static colnr_T	resel_VIsual_vcol;		/* nr of cols or end col */
-static int	VIsual_mode_orig = NUL;		/* saved Visual mode */
-
+static int	VIsual_mode_orig = NUL;		// saved Visual mode
 static int	restart_VIsual_select = 0;
 
 #ifdef FEAT_EVAL
 static void	set_vcount_ca(cmdarg_T *cap, int *set_prevcount);
 #endif
 static int	nv_compare(const void *s1, const void *s2);
-static void	op_colon(oparg_T *oap);
-static void	op_function(oparg_T *oap);
 static void	unshift_special(cmdarg_T *cap);
-static void	may_clear_cmdline(void);
 #ifdef FEAT_CMDL_INFO
 static void	del_from_showcmd(int);
 #endif
@@ -115,7 +105,6 @@
 static void	nv_beginline(cmdarg_T *cap);
 static void	adjust_cursor(oparg_T *oap);
 static void	adjust_for_sel(cmdarg_T *cap);
-static int	unadjust_for_sel(void);
 static void	nv_select(cmdarg_T *cap);
 static void	nv_goto(cmdarg_T *cap);
 static void	nv_normal(cmdarg_T *cap);
@@ -139,7 +128,6 @@
 static void	nv_drop(cmdarg_T *cap);
 #endif
 static void	nv_cursorhold(cmdarg_T *cap);
-static void	get_op_vcol(oparg_T *oap, colnr_T col, int initial);
 
 static char *e_noident = N_("E349: No identifier under cursor");
 
@@ -1295,900 +1283,6 @@
 #endif
 
 /*
- * Handle an operator after Visual mode or when the movement is finished.
- * "gui_yank" is true when yanking text for the clipboard.
- */
-    void
-do_pending_operator(cmdarg_T *cap, int old_col, int gui_yank)
-{
-    oparg_T	*oap = cap->oap;
-    pos_T	old_cursor;
-    int		empty_region_error;
-    int		restart_edit_save;
-#ifdef FEAT_LINEBREAK
-    int		lbr_saved = curwin->w_p_lbr;
-#endif
-
-    /* The visual area is remembered for redo */
-    static int	    redo_VIsual_mode = NUL; /* 'v', 'V', or Ctrl-V */
-    static linenr_T redo_VIsual_line_count; /* number of lines */
-    static colnr_T  redo_VIsual_vcol;	    /* number of cols or end column */
-    static long	    redo_VIsual_count;	    /* count for Visual operator */
-    static int	    redo_VIsual_arg;	    /* extra argument */
-    int		    include_line_break = FALSE;
-
-#if defined(FEAT_CLIPBOARD)
-    /*
-     * Yank the visual area into the GUI selection register before we operate
-     * on it and lose it forever.
-     * Don't do it if a specific register was specified, so that ""x"*P works.
-     * This could call do_pending_operator() recursively, but that's OK
-     * because gui_yank will be TRUE for the nested call.
-     */
-    if ((clip_star.available || clip_plus.available)
-	    && oap->op_type != OP_NOP
-	    && !gui_yank
-	    && VIsual_active
-	    && !redo_VIsual_busy
-	    && oap->regname == 0)
-	clip_auto_select();
-#endif
-    old_cursor = curwin->w_cursor;
-
-    /*
-     * If an operation is pending, handle it...
-     */
-    if ((finish_op || VIsual_active) && oap->op_type != OP_NOP)
-    {
-	// Yank can be redone when 'y' is in 'cpoptions', but not when yanking
-	// for the clipboard.
-	int	redo_yank = vim_strchr(p_cpo, CPO_YANK) != NULL && !gui_yank;
-
-#ifdef FEAT_LINEBREAK
-	/* Avoid a problem with unwanted linebreaks in block mode. */
-	if (curwin->w_p_lbr)
-	    curwin->w_valid &= ~VALID_VIRTCOL;
-	curwin->w_p_lbr = FALSE;
-#endif
-	oap->is_VIsual = VIsual_active;
-	if (oap->motion_force == 'V')
-	    oap->motion_type = MLINE;
-	else if (oap->motion_force == 'v')
-	{
-	    /* If the motion was linewise, "inclusive" will not have been set.
-	     * Use "exclusive" to be consistent.  Makes "dvj" work nice. */
-	    if (oap->motion_type == MLINE)
-		oap->inclusive = FALSE;
-	    /* If the motion already was characterwise, toggle "inclusive" */
-	    else if (oap->motion_type == MCHAR)
-		oap->inclusive = !oap->inclusive;
-	    oap->motion_type = MCHAR;
-	}
-	else if (oap->motion_force == Ctrl_V)
-	{
-	    /* Change line- or characterwise motion into Visual block mode. */
-	    if (!VIsual_active)
-	    {
-		VIsual_active = TRUE;
-		VIsual = oap->start;
-	    }
-	    VIsual_mode = Ctrl_V;
-	    VIsual_select = FALSE;
-	    VIsual_reselect = FALSE;
-	}
-
-	/* Only redo yank when 'y' flag is in 'cpoptions'. */
-	/* Never redo "zf" (define fold). */
-	if ((redo_yank || oap->op_type != OP_YANK)
-		&& ((!VIsual_active || oap->motion_force)
-		    /* Also redo Operator-pending Visual mode mappings */
-		    || (VIsual_active && cap->cmdchar == ':'
-						 && oap->op_type != OP_COLON))
-		&& cap->cmdchar != 'D'
-#ifdef FEAT_FOLDING
-		&& oap->op_type != OP_FOLD
-		&& oap->op_type != OP_FOLDOPEN
-		&& oap->op_type != OP_FOLDOPENREC
-		&& oap->op_type != OP_FOLDCLOSE
-		&& oap->op_type != OP_FOLDCLOSEREC
-		&& oap->op_type != OP_FOLDDEL
-		&& oap->op_type != OP_FOLDDELREC
-#endif
-		)
-	{
-	    prep_redo(oap->regname, cap->count0,
-		    get_op_char(oap->op_type), get_extra_op_char(oap->op_type),
-		    oap->motion_force, cap->cmdchar, cap->nchar);
-	    if (cap->cmdchar == '/' || cap->cmdchar == '?') /* was a search */
-	    {
-		/*
-		 * If 'cpoptions' does not contain 'r', insert the search
-		 * pattern to really repeat the same command.
-		 */
-		if (vim_strchr(p_cpo, CPO_REDO) == NULL)
-		    AppendToRedobuffLit(cap->searchbuf, -1);
-		AppendToRedobuff(NL_STR);
-	    }
-	    else if (cap->cmdchar == ':')
-	    {
-		/* do_cmdline() has stored the first typed line in
-		 * "repeat_cmdline".  When several lines are typed repeating
-		 * won't be possible. */
-		if (repeat_cmdline == NULL)
-		    ResetRedobuff();
-		else
-		{
-		    AppendToRedobuffLit(repeat_cmdline, -1);
-		    AppendToRedobuff(NL_STR);
-		    VIM_CLEAR(repeat_cmdline);
-		}
-	    }
-	}
-
-	if (redo_VIsual_busy)
-	{
-	    /* Redo of an operation on a Visual area. Use the same size from
-	     * redo_VIsual_line_count and redo_VIsual_vcol. */
-	    oap->start = curwin->w_cursor;
-	    curwin->w_cursor.lnum += redo_VIsual_line_count - 1;
-	    if (curwin->w_cursor.lnum > curbuf->b_ml.ml_line_count)
-		curwin->w_cursor.lnum = curbuf->b_ml.ml_line_count;
-	    VIsual_mode = redo_VIsual_mode;
-	    if (redo_VIsual_vcol == MAXCOL || VIsual_mode == 'v')
-	    {
-		if (VIsual_mode == 'v')
-		{
-		    if (redo_VIsual_line_count <= 1)
-		    {
-			validate_virtcol();
-			curwin->w_curswant =
-				     curwin->w_virtcol + redo_VIsual_vcol - 1;
-		    }
-		    else
-			curwin->w_curswant = redo_VIsual_vcol;
-		}
-		else
-		{
-		    curwin->w_curswant = MAXCOL;
-		}
-		coladvance(curwin->w_curswant);
-	    }
-	    cap->count0 = redo_VIsual_count;
-	    if (redo_VIsual_count != 0)
-		cap->count1 = redo_VIsual_count;
-	    else
-		cap->count1 = 1;
-	}
-	else if (VIsual_active)
-	{
-	    if (!gui_yank)
-	    {
-		/* Save the current VIsual area for '< and '> marks, and "gv" */
-		curbuf->b_visual.vi_start = VIsual;
-		curbuf->b_visual.vi_end = curwin->w_cursor;
-		curbuf->b_visual.vi_mode = VIsual_mode;
-		if (VIsual_mode_orig != NUL)
-		{
-		    curbuf->b_visual.vi_mode = VIsual_mode_orig;
-		    VIsual_mode_orig = NUL;
-		}
-		curbuf->b_visual.vi_curswant = curwin->w_curswant;
-# ifdef FEAT_EVAL
-		curbuf->b_visual_mode_eval = VIsual_mode;
-# endif
-	    }
-
-	    /* In Select mode, a linewise selection is operated upon like a
-	     * characterwise selection.
-	     * Special case: gH<Del> deletes the last line. */
-	    if (VIsual_select && VIsual_mode == 'V'
-					    && cap->oap->op_type != OP_DELETE)
-	    {
-		if (LT_POS(VIsual, curwin->w_cursor))
-		{
-		    VIsual.col = 0;
-		    curwin->w_cursor.col =
-			       (colnr_T)STRLEN(ml_get(curwin->w_cursor.lnum));
-		}
-		else
-		{
-		    curwin->w_cursor.col = 0;
-		    VIsual.col = (colnr_T)STRLEN(ml_get(VIsual.lnum));
-		}
-		VIsual_mode = 'v';
-	    }
-	    /* If 'selection' is "exclusive", backup one character for
-	     * charwise selections. */
-	    else if (VIsual_mode == 'v')
-		include_line_break = unadjust_for_sel();
-
-	    oap->start = VIsual;
-	    if (VIsual_mode == 'V')
-	    {
-		oap->start.col = 0;
-		oap->start.coladd = 0;
-	    }
-	}
-
-	/*
-	 * Set oap->start to the first position of the operated text, oap->end
-	 * to the end of the operated text.  w_cursor is equal to oap->start.
-	 */
-	if (LT_POS(oap->start, curwin->w_cursor))
-	{
-#ifdef FEAT_FOLDING
-	    /* Include folded lines completely. */
-	    if (!VIsual_active)
-	    {
-		if (hasFolding(oap->start.lnum, &oap->start.lnum, NULL))
-		    oap->start.col = 0;
-		if ((curwin->w_cursor.col > 0 || oap->inclusive)
-			&& hasFolding(curwin->w_cursor.lnum, NULL,
-						      &curwin->w_cursor.lnum))
-		    curwin->w_cursor.col = (colnr_T)STRLEN(ml_get_curline());
-	    }
-#endif
-	    oap->end = curwin->w_cursor;
-	    curwin->w_cursor = oap->start;
-
-	    /* w_virtcol may have been updated; if the cursor goes back to its
-	     * previous position w_virtcol becomes invalid and isn't updated
-	     * automatically. */
-	    curwin->w_valid &= ~VALID_VIRTCOL;
-	}
-	else
-	{
-#ifdef FEAT_FOLDING
-	    /* Include folded lines completely. */
-	    if (!VIsual_active && oap->motion_type == MLINE)
-	    {
-		if (hasFolding(curwin->w_cursor.lnum, &curwin->w_cursor.lnum,
-									NULL))
-		    curwin->w_cursor.col = 0;
-		if (hasFolding(oap->start.lnum, NULL, &oap->start.lnum))
-		    oap->start.col = (colnr_T)STRLEN(ml_get(oap->start.lnum));
-	    }
-#endif
-	    oap->end = oap->start;
-	    oap->start = curwin->w_cursor;
-	}
-
-	/* Just in case lines were deleted that make the position invalid. */
-	check_pos(curwin->w_buffer, &oap->end);
-	oap->line_count = oap->end.lnum - oap->start.lnum + 1;
-
-	/* Set "virtual_op" before resetting VIsual_active. */
-	virtual_op = virtual_active();
-
-	if (VIsual_active || redo_VIsual_busy)
-	{
-	    get_op_vcol(oap, redo_VIsual_vcol, TRUE);
-
-	    if (!redo_VIsual_busy && !gui_yank)
-	    {
-		/*
-		 * Prepare to reselect and redo Visual: this is based on the
-		 * size of the Visual text
-		 */
-		resel_VIsual_mode = VIsual_mode;
-		if (curwin->w_curswant == MAXCOL)
-		    resel_VIsual_vcol = MAXCOL;
-		else
-		{
-		    if (VIsual_mode != Ctrl_V)
-			getvvcol(curwin, &(oap->end),
-						  NULL, NULL, &oap->end_vcol);
-		    if (VIsual_mode == Ctrl_V || oap->line_count <= 1)
-		    {
-			if (VIsual_mode != Ctrl_V)
-			    getvvcol(curwin, &(oap->start),
-						&oap->start_vcol, NULL, NULL);
-			resel_VIsual_vcol = oap->end_vcol - oap->start_vcol + 1;
-		    }
-		    else
-			resel_VIsual_vcol = oap->end_vcol;
-		}
-		resel_VIsual_line_count = oap->line_count;
-	    }
-
-	    /* can't redo yank (unless 'y' is in 'cpoptions') and ":" */
-	    if ((redo_yank || oap->op_type != OP_YANK)
-		    && oap->op_type != OP_COLON
-#ifdef FEAT_FOLDING
-		    && oap->op_type != OP_FOLD
-		    && oap->op_type != OP_FOLDOPEN
-		    && oap->op_type != OP_FOLDOPENREC
-		    && oap->op_type != OP_FOLDCLOSE
-		    && oap->op_type != OP_FOLDCLOSEREC
-		    && oap->op_type != OP_FOLDDEL
-		    && oap->op_type != OP_FOLDDELREC
-#endif
-		    && oap->motion_force == NUL
-		    )
-	    {
-		/* Prepare for redoing.  Only use the nchar field for "r",
-		 * otherwise it might be the second char of the operator. */
-		if (cap->cmdchar == 'g' && (cap->nchar == 'n'
-							|| cap->nchar == 'N'))
-		    prep_redo(oap->regname, cap->count0,
-			    get_op_char(oap->op_type), get_extra_op_char(oap->op_type),
-			    oap->motion_force, cap->cmdchar, cap->nchar);
-		else if (cap->cmdchar != ':')
-		{
-		    int nchar = oap->op_type == OP_REPLACE ? cap->nchar : NUL;
-
-		    /* reverse what nv_replace() did */
-		    if (nchar == REPLACE_CR_NCHAR)
-			nchar = CAR;
-		    else if (nchar == REPLACE_NL_NCHAR)
-			nchar = NL;
-		    prep_redo(oap->regname, 0L, NUL, 'v',
-					get_op_char(oap->op_type),
-					get_extra_op_char(oap->op_type),
-					nchar);
-		}
-		if (!redo_VIsual_busy)
-		{
-		    redo_VIsual_mode = resel_VIsual_mode;
-		    redo_VIsual_vcol = resel_VIsual_vcol;
-		    redo_VIsual_line_count = resel_VIsual_line_count;
-		    redo_VIsual_count = cap->count0;
-		    redo_VIsual_arg = cap->arg;
-		}
-	    }
-
-	    /*
-	     * oap->inclusive defaults to TRUE.
-	     * If oap->end is on a NUL (empty line) oap->inclusive becomes
-	     * FALSE.  This makes "d}P" and "v}dP" work the same.
-	     */
-	    if (oap->motion_force == NUL || oap->motion_type == MLINE)
-		oap->inclusive = TRUE;
-	    if (VIsual_mode == 'V')
-		oap->motion_type = MLINE;
-	    else
-	    {
-		oap->motion_type = MCHAR;
-		if (VIsual_mode != Ctrl_V && *ml_get_pos(&(oap->end)) == NUL
-			&& (include_line_break || !virtual_op))
-		{
-		    oap->inclusive = FALSE;
-		    /* Try to include the newline, unless it's an operator
-		     * that works on lines only. */
-		    if (*p_sel != 'o'
-			    && !op_on_lines(oap->op_type)
-			    && oap->end.lnum < curbuf->b_ml.ml_line_count)
-		    {
-			++oap->end.lnum;
-			oap->end.col = 0;
-			oap->end.coladd = 0;
-			++oap->line_count;
-		    }
-		}
-	    }
-
-	    redo_VIsual_busy = FALSE;
-
-	    /*
-	     * Switch Visual off now, so screen updating does
-	     * not show inverted text when the screen is redrawn.
-	     * With OP_YANK and sometimes with OP_COLON and OP_FILTER there is
-	     * no screen redraw, so it is done here to remove the inverted
-	     * part.
-	     */
-	    if (!gui_yank)
-	    {
-		VIsual_active = FALSE;
-#ifdef FEAT_MOUSE
-		setmouse();
-		mouse_dragging = 0;
-#endif
-		may_clear_cmdline();
-		if ((oap->op_type == OP_YANK
-			    || oap->op_type == OP_COLON
-			    || oap->op_type == OP_FUNCTION
-			    || oap->op_type == OP_FILTER)
-			&& oap->motion_force == NUL)
-		{
-#ifdef FEAT_LINEBREAK
-		    /* make sure redrawing is correct */
-		    curwin->w_p_lbr = lbr_saved;
-#endif
-		    redraw_curbuf_later(INVERTED);
-		}
-	    }
-	}
-
-	/* Include the trailing byte of a multi-byte char. */
-	if (has_mbyte && oap->inclusive)
-	{
-	    int		l;
-
-	    l = (*mb_ptr2len)(ml_get_pos(&oap->end));
-	    if (l > 1)
-		oap->end.col += l - 1;
-	}
-	curwin->w_set_curswant = TRUE;
-
-	/*
-	 * oap->empty is set when start and end are the same.  The inclusive
-	 * flag affects this too, unless yanking and the end is on a NUL.
-	 */
-	oap->empty = (oap->motion_type == MCHAR
-		    && (!oap->inclusive
-			|| (oap->op_type == OP_YANK
-			    && gchar_pos(&oap->end) == NUL))
-		    && EQUAL_POS(oap->start, oap->end)
-		    && !(virtual_op && oap->start.coladd != oap->end.coladd));
-	/*
-	 * For delete, change and yank, it's an error to operate on an
-	 * empty region, when 'E' included in 'cpoptions' (Vi compatible).
-	 */
-	empty_region_error = (oap->empty
-				&& vim_strchr(p_cpo, CPO_EMPTYREGION) != NULL);
-
-	/* Force a redraw when operating on an empty Visual region, when
-	 * 'modifiable is off or creating a fold. */
-	if (oap->is_VIsual && (oap->empty || !curbuf->b_p_ma
-#ifdef FEAT_FOLDING
-		    || oap->op_type == OP_FOLD
-#endif
-		    ))
-	{
-#ifdef FEAT_LINEBREAK
-	    curwin->w_p_lbr = lbr_saved;
-#endif
-	    redraw_curbuf_later(INVERTED);
-	}
-
-	/*
-	 * If the end of an operator is in column one while oap->motion_type
-	 * is MCHAR and oap->inclusive is FALSE, we put op_end after the last
-	 * character in the previous line. If op_start is on or before the
-	 * first non-blank in the line, the operator becomes linewise
-	 * (strange, but that's the way vi does it).
-	 */
-	if (	   oap->motion_type == MCHAR
-		&& oap->inclusive == FALSE
-		&& !(cap->retval & CA_NO_ADJ_OP_END)
-		&& oap->end.col == 0
-		&& (!oap->is_VIsual || *p_sel == 'o')
-		&& !oap->block_mode
-		&& oap->line_count > 1)
-	{
-	    oap->end_adjusted = TRUE;	    /* remember that we did this */
-	    --oap->line_count;
-	    --oap->end.lnum;
-	    if (inindent(0))
-		oap->motion_type = MLINE;
-	    else
-	    {
-		oap->end.col = (colnr_T)STRLEN(ml_get(oap->end.lnum));
-		if (oap->end.col)
-		{
-		    --oap->end.col;
-		    oap->inclusive = TRUE;
-		}
-	    }
-	}
-	else
-	    oap->end_adjusted = FALSE;
-
-	switch (oap->op_type)
-	{
-	case OP_LSHIFT:
-	case OP_RSHIFT:
-	    op_shift(oap, TRUE, oap->is_VIsual ? (int)cap->count1 : 1);
-	    auto_format(FALSE, TRUE);
-	    break;
-
-	case OP_JOIN_NS:
-	case OP_JOIN:
-	    if (oap->line_count < 2)
-		oap->line_count = 2;
-	    if (curwin->w_cursor.lnum + oap->line_count - 1 >
-						   curbuf->b_ml.ml_line_count)
-		beep_flush();
-	    else
-	    {
-		(void)do_join(oap->line_count, oap->op_type == OP_JOIN,
-							    TRUE, TRUE, TRUE);
-		auto_format(FALSE, TRUE);
-	    }
-	    break;
-
-	case OP_DELETE:
-	    VIsual_reselect = FALSE;	    /* don't reselect now */
-	    if (empty_region_error)
-	    {
-		vim_beep(BO_OPER);
-		CancelRedo();
-	    }
-	    else
-	    {
-		(void)op_delete(oap);
-		if (oap->motion_type == MLINE && has_format_option(FO_AUTO))
-		    u_save_cursor();	    /* cursor line wasn't saved yet */
-		auto_format(FALSE, TRUE);
-	    }
-	    break;
-
-	case OP_YANK:
-	    if (empty_region_error)
-	    {
-		if (!gui_yank)
-		{
-		    vim_beep(BO_OPER);
-		    CancelRedo();
-		}
-	    }
-	    else
-	    {
-#ifdef FEAT_LINEBREAK
-		curwin->w_p_lbr = lbr_saved;
-#endif
-		(void)op_yank(oap, FALSE, !gui_yank);
-	    }
-	    check_cursor_col();
-	    break;
-
-	case OP_CHANGE:
-	    VIsual_reselect = FALSE;	    /* don't reselect now */
-	    if (empty_region_error)
-	    {
-		vim_beep(BO_OPER);
-		CancelRedo();
-	    }
-	    else
-	    {
-		/* This is a new edit command, not a restart.  Need to
-		 * remember it to make 'insertmode' work with mappings for
-		 * Visual mode.  But do this only once and not when typed and
-		 * 'insertmode' isn't set. */
-		if (p_im || !KeyTyped)
-		    restart_edit_save = restart_edit;
-		else
-		    restart_edit_save = 0;
-		restart_edit = 0;
-#ifdef FEAT_LINEBREAK
-		/* Restore linebreak, so that when the user edits it looks as
-		 * before. */
-		if (curwin->w_p_lbr != lbr_saved)
-		{
-		    curwin->w_p_lbr = lbr_saved;
-		    get_op_vcol(oap, redo_VIsual_mode, FALSE);
-		}
-#endif
-		/* Reset finish_op now, don't want it set inside edit(). */
-		finish_op = FALSE;
-		if (op_change(oap))	/* will call edit() */
-		    cap->retval |= CA_COMMAND_BUSY;
-		if (restart_edit == 0)
-		    restart_edit = restart_edit_save;
-	    }
-	    break;
-
-	case OP_FILTER:
-	    if (vim_strchr(p_cpo, CPO_FILTER) != NULL)
-		AppendToRedobuff((char_u *)"!\r");  /* use any last used !cmd */
-	    else
-		bangredo = TRUE;    /* do_bang() will put cmd in redo buffer */
-	    /* FALLTHROUGH */
-
-	case OP_INDENT:
-	case OP_COLON:
-
-#if defined(FEAT_LISP) || defined(FEAT_CINDENT)
-	    /*
-	     * If 'equalprg' is empty, do the indenting internally.
-	     */
-	    if (oap->op_type == OP_INDENT && *get_equalprg() == NUL)
-	    {
-# ifdef FEAT_LISP
-		if (curbuf->b_p_lisp)
-		{
-		    op_reindent(oap, get_lisp_indent);
-		    break;
-		}
-# endif
-# ifdef FEAT_CINDENT
-		op_reindent(oap,
-#  ifdef FEAT_EVAL
-			*curbuf->b_p_inde != NUL ? get_expr_indent :
-#  endif
-			    get_c_indent);
-		break;
-# endif
-	    }
-#endif
-
-	    op_colon(oap);
-	    break;
-
-	case OP_TILDE:
-	case OP_UPPER:
-	case OP_LOWER:
-	case OP_ROT13:
-	    if (empty_region_error)
-	    {
-		vim_beep(BO_OPER);
-		CancelRedo();
-	    }
-	    else
-		op_tilde(oap);
-	    check_cursor_col();
-	    break;
-
-	case OP_FORMAT:
-#if defined(FEAT_EVAL)
-	    if (*curbuf->b_p_fex != NUL)
-		op_formatexpr(oap);	/* use expression */
-	    else
-#endif
-		if (*p_fp != NUL || *curbuf->b_p_fp != NUL)
-		op_colon(oap);		/* use external command */
-	    else
-		op_format(oap, FALSE);	/* use internal function */
-	    break;
-
-	case OP_FORMAT2:
-	    op_format(oap, TRUE);	/* use internal function */
-	    break;
-
-	case OP_FUNCTION:
-#ifdef FEAT_LINEBREAK
-	    /* Restore linebreak, so that when the user edits it looks as
-	     * before. */
-	    curwin->w_p_lbr = lbr_saved;
-#endif
-	    op_function(oap);		/* call 'operatorfunc' */
-	    break;
-
-	case OP_INSERT:
-	case OP_APPEND:
-	    VIsual_reselect = FALSE;	/* don't reselect now */
-	    if (empty_region_error)
-	    {
-		vim_beep(BO_OPER);
-		CancelRedo();
-	    }
-	    else
-	    {
-		/* This is a new edit command, not a restart.  Need to
-		 * remember it to make 'insertmode' work with mappings for
-		 * Visual mode.  But do this only once. */
-		restart_edit_save = restart_edit;
-		restart_edit = 0;
-#ifdef FEAT_LINEBREAK
-		/* Restore linebreak, so that when the user edits it looks as
-		 * before. */
-		if (curwin->w_p_lbr != lbr_saved)
-		{
-		    curwin->w_p_lbr = lbr_saved;
-		    get_op_vcol(oap, redo_VIsual_mode, FALSE);
-		}
-#endif
-		op_insert(oap, cap->count1);
-#ifdef FEAT_LINEBREAK
-		/* Reset linebreak, so that formatting works correctly. */
-		curwin->w_p_lbr = FALSE;
-#endif
-
-		/* TODO: when inserting in several lines, should format all
-		 * the lines. */
-		auto_format(FALSE, TRUE);
-
-		if (restart_edit == 0)
-		    restart_edit = restart_edit_save;
-		else
-		    cap->retval |= CA_COMMAND_BUSY;
-	    }
-	    break;
-
-	case OP_REPLACE:
-	    VIsual_reselect = FALSE;	/* don't reselect now */
-	    if (empty_region_error)
-	    {
-		vim_beep(BO_OPER);
-		CancelRedo();
-	    }
-	    else
-	    {
-#ifdef FEAT_LINEBREAK
-		/* Restore linebreak, so that when the user edits it looks as
-		 * before. */
-		if (curwin->w_p_lbr != lbr_saved)
-		{
-		    curwin->w_p_lbr = lbr_saved;
-		    get_op_vcol(oap, redo_VIsual_mode, FALSE);
-		}
-#endif
-		op_replace(oap, cap->nchar);
-	    }
-	    break;
-
-#ifdef FEAT_FOLDING
-	case OP_FOLD:
-	    VIsual_reselect = FALSE;	/* don't reselect now */
-	    foldCreate(oap->start.lnum, oap->end.lnum);
-	    break;
-
-	case OP_FOLDOPEN:
-	case OP_FOLDOPENREC:
-	case OP_FOLDCLOSE:
-	case OP_FOLDCLOSEREC:
-	    VIsual_reselect = FALSE;	/* don't reselect now */
-	    opFoldRange(oap->start.lnum, oap->end.lnum,
-		    oap->op_type == OP_FOLDOPEN
-					    || oap->op_type == OP_FOLDOPENREC,
-		    oap->op_type == OP_FOLDOPENREC
-					  || oap->op_type == OP_FOLDCLOSEREC,
-					  oap->is_VIsual);
-	    break;
-
-	case OP_FOLDDEL:
-	case OP_FOLDDELREC:
-	    VIsual_reselect = FALSE;	/* don't reselect now */
-	    deleteFold(oap->start.lnum, oap->end.lnum,
-			       oap->op_type == OP_FOLDDELREC, oap->is_VIsual);
-	    break;
-#endif
-	case OP_NR_ADD:
-	case OP_NR_SUB:
-	    if (empty_region_error)
-	    {
-		vim_beep(BO_OPER);
-		CancelRedo();
-	    }
-	    else
-	    {
-		VIsual_active = TRUE;
-#ifdef FEAT_LINEBREAK
-		curwin->w_p_lbr = lbr_saved;
-#endif
-		op_addsub(oap, cap->count1, redo_VIsual_arg);
-		VIsual_active = FALSE;
-	    }
-	    check_cursor_col();
-	    break;
-	default:
-	    clearopbeep(oap);
-	}
-	virtual_op = MAYBE;
-	if (!gui_yank)
-	{
-	    /*
-	     * if 'sol' not set, go back to old column for some commands
-	     */
-	    if (!p_sol && oap->motion_type == MLINE && !oap->end_adjusted
-		    && (oap->op_type == OP_LSHIFT || oap->op_type == OP_RSHIFT
-						|| oap->op_type == OP_DELETE))
-	    {
-#ifdef FEAT_LINEBREAK
-		curwin->w_p_lbr = FALSE;
-#endif
-		coladvance(curwin->w_curswant = old_col);
-	    }
-	}
-	else
-	{
-	    curwin->w_cursor = old_cursor;
-	}
-	oap->block_mode = FALSE;
-	clearop(oap);
-	motion_force = NUL;
-    }
-#ifdef FEAT_LINEBREAK
-    curwin->w_p_lbr = lbr_saved;
-#endif
-}
-
-/*
- * Handle indent and format operators and visual mode ":".
- */
-    static void
-op_colon(oparg_T *oap)
-{
-    stuffcharReadbuff(':');
-    if (oap->is_VIsual)
-	stuffReadbuff((char_u *)"'<,'>");
-    else
-    {
-	/*
-	 * Make the range look nice, so it can be repeated.
-	 */
-	if (oap->start.lnum == curwin->w_cursor.lnum)
-	    stuffcharReadbuff('.');
-	else
-	    stuffnumReadbuff((long)oap->start.lnum);
-	if (oap->end.lnum != oap->start.lnum)
-	{
-	    stuffcharReadbuff(',');
-	    if (oap->end.lnum == curwin->w_cursor.lnum)
-		stuffcharReadbuff('.');
-	    else if (oap->end.lnum == curbuf->b_ml.ml_line_count)
-		stuffcharReadbuff('$');
-	    else if (oap->start.lnum == curwin->w_cursor.lnum)
-	    {
-		stuffReadbuff((char_u *)".+");
-		stuffnumReadbuff((long)oap->line_count - 1);
-	    }
-	    else
-		stuffnumReadbuff((long)oap->end.lnum);
-	}
-    }
-    if (oap->op_type != OP_COLON)
-	stuffReadbuff((char_u *)"!");
-    if (oap->op_type == OP_INDENT)
-    {
-#ifndef FEAT_CINDENT
-	if (*get_equalprg() == NUL)
-	    stuffReadbuff((char_u *)"indent");
-	else
-#endif
-	    stuffReadbuff(get_equalprg());
-	stuffReadbuff((char_u *)"\n");
-    }
-    else if (oap->op_type == OP_FORMAT)
-    {
-	if (*curbuf->b_p_fp != NUL)
-	    stuffReadbuff(curbuf->b_p_fp);
-	else if (*p_fp != NUL)
-	    stuffReadbuff(p_fp);
-	else
-	    stuffReadbuff((char_u *)"fmt");
-	stuffReadbuff((char_u *)"\n']");
-    }
-
-    /*
-     * do_cmdline() does the rest
-     */
-}
-
-/*
- * Handle the "g@" operator: call 'operatorfunc'.
- */
-    static void
-op_function(oparg_T *oap UNUSED)
-{
-#ifdef FEAT_EVAL
-    typval_T	argv[2];
-    int		save_virtual_op = virtual_op;
-
-    if (*p_opfunc == NUL)
-	emsg(_("E774: 'operatorfunc' is empty"));
-    else
-    {
-	/* Set '[ and '] marks to text to be operated on. */
-	curbuf->b_op_start = oap->start;
-	curbuf->b_op_end = oap->end;
-	if (oap->motion_type != MLINE && !oap->inclusive)
-	    /* Exclude the end position. */
-	    decl(&curbuf->b_op_end);
-
-	argv[0].v_type = VAR_STRING;
-	if (oap->block_mode)
-	    argv[0].vval.v_string = (char_u *)"block";
-	else if (oap->motion_type == MLINE)
-	    argv[0].vval.v_string = (char_u *)"line";
-	else
-	    argv[0].vval.v_string = (char_u *)"char";
-	argv[1].v_type = VAR_UNKNOWN;
-
-	/* Reset virtual_op so that 'virtualedit' can be changed in the
-	 * function. */
-	virtual_op = MAYBE;
-
-	(void)call_func_retnr(p_opfunc, 1, argv);
-
-	virtual_op = save_virtual_op;
-    }
-#else
-    emsg(_("E775: Eval feature not available"));
-#endif
-}
-
-/*
  * Check if  highlighting for visual mode is possible, give a warning message
  * if not.
  */
@@ -2273,6 +1367,16 @@
     }
 }
 
+    void
+restore_visual_mode(void)
+{
+    if (VIsual_mode_orig != NUL)
+    {
+	curbuf->b_visual.vi_mode = VIsual_mode_orig;
+	VIsual_mode_orig = NUL;
+    }
+}
+
 /*
  * Check for a balloon-eval special item to include when searching for an
  * identifier.  When "dir" is BACKWARD "ptr[-1]" must be valid!
@@ -2611,7 +1715,7 @@
  * If the mode is currently displayed clear the command line or update the
  * command displayed.
  */
-    static void
+    void
 may_clear_cmdline(void)
 {
     if (mode_displayed)
@@ -7606,7 +6710,7 @@
  * Should check VIsual_mode before calling this.
  * Returns TRUE when backed up to the previous line.
  */
-    static int
+    int
 unadjust_for_sel(void)
 {
     pos_T	*pp;
@@ -8361,74 +7465,3 @@
     did_cursorhold = TRUE;
     cap->retval |= CA_COMMAND_BUSY;	/* don't call edit() now */
 }
-
-/*
- * Calculate start/end virtual columns for operating in block mode.
- */
-    static void
-get_op_vcol(
-    oparg_T	*oap,
-    colnr_T	redo_VIsual_vcol,
-    int		initial)    /* when TRUE adjust position for 'selectmode' */
-{
-    colnr_T	    start, end;
-
-    if (VIsual_mode != Ctrl_V
-	    || (!initial && oap->end.col < curwin->w_width))
-	return;
-
-    oap->block_mode = TRUE;
-
-    /* prevent from moving onto a trail byte */
-    if (has_mbyte)
-	mb_adjustpos(curwin->w_buffer, &oap->end);
-
-    getvvcol(curwin, &(oap->start), &oap->start_vcol, NULL, &oap->end_vcol);
-
-    if (!redo_VIsual_busy)
-    {
-	getvvcol(curwin, &(oap->end), &start, NULL, &end);
-
-	if (start < oap->start_vcol)
-	    oap->start_vcol = start;
-	if (end > oap->end_vcol)
-	{
-	    if (initial && *p_sel == 'e' && start >= 1
-				    && start - 1 >= oap->end_vcol)
-		oap->end_vcol = start - 1;
-	    else
-		oap->end_vcol = end;
-	}
-    }
-
-    /* if '$' was used, get oap->end_vcol from longest line */
-    if (curwin->w_curswant == MAXCOL)
-    {
-	curwin->w_cursor.col = MAXCOL;
-	oap->end_vcol = 0;
-	for (curwin->w_cursor.lnum = oap->start.lnum;
-		curwin->w_cursor.lnum <= oap->end.lnum;
-					++curwin->w_cursor.lnum)
-	{
-	    getvvcol(curwin, &curwin->w_cursor, NULL, NULL, &end);
-	    if (end > oap->end_vcol)
-		oap->end_vcol = end;
-	}
-    }
-    else if (redo_VIsual_busy)
-	oap->end_vcol = oap->start_vcol + redo_VIsual_vcol - 1;
-    /*
-    * Correct oap->end.col and oap->start.col to be the
-    * upper-left and lower-right corner of the block area.
-    *
-    * (Actually, this does convert column positions into character
-    * positions)
-    */
-    curwin->w_cursor.lnum = oap->end.lnum;
-    coladvance(oap->end_vcol);
-    oap->end = curwin->w_cursor;
-
-    curwin->w_cursor = oap->start;
-    coladvance(oap->start_vcol);
-    oap->start = curwin->w_cursor;
-}